Abstract
The future challenge of quantum communication is scalable quantum networks, which require coherent and reversible mapping of photonic qubits onto atomic systems (quantum memories). A crucial requirement for realistic networks is the ability to efficiently store multiple qubits in one quantum memory. In this study, we show a coherent and reversible mapping of 64 optical modes at the single-photon level in the time domain onto one solid-state ensemble of rare-earth ions. Our light���matter interface is based on a high-bandwidth (100 MHz) atomic frequency comb, with a predetermined storage time of ≳1 μs. We can then encode many qubits in short (<10 ns) temporal modes (time-bin qubits). We show the good coherence of mapping by simultaneously storing and analysing multiple time-bin qubits.
Similar content being viewed by others
Introduction
Quantum communication1 offers the possibility of secure transmission of messages using quantum key distribution2 and teleportation of unknown quantum states3. Quantum communication relies on the creation, manipulation and transmission of qubits in photonic channels. Photons have proven to be robust carriers of quantum information. Yet, the transmission of photons through a fibre link, for instance, is inherently a lossy process. This leads to a probabilistic nature of the outcome of experiments. In large-scale quantum networks4, the possibility of synchronizing independent and probabilistic quantum channels is required for scalability5,6. A quantum memory enables this by momentarily holding a photon and then releasing it when another part of the network is ready. To reach reasonable rates in a realistic network, it is necessary to use multiplexing7, which demands quantum memories capable of storing many single photons in different modes.
A quantum memory requires a coherent medium with strong coupling to a light mode. Strong and coherent interactions can be found in ensembles of atoms8, for instance, alkali atoms or rare-earth (RE) ions doped into crystals. The latter are attractive for quantum storage applications, as they provide solid-state systems with a large number of stationary atoms having excellent coherence properties. Optical coherence times of up to milliseconds9 and spin coherence times greater than seconds10 have been shown at low temperature (≲4 K).
A quantum memory also requires a scheme for achieving efficient and reversible mapping of the photonic qubit onto the atomic ensemble. Techniques investigated include stopped light based on electromagnetically induced transparency (EIT)11,12,13, Raman interactions14,15,16,17 or photon-echo-based schemes18,19,20,21,22. Much progress has been made in terms of quantum memory efficiency13,23 and storage time24,25. Storage of multiple qubits is challenging, however, because it necessitates a quantum memory that can store many optical modes into which qubits can be encoded. A mode can be defined in time, space or frequency. Lan et al.26 recently showed that a multiplexed quantum memory can be achieved by storing several single excitations in separate spatial modes, each functioning as an independent memory. Time multiplexing, as used in classical communication, has the great advantage of requiring only a single spatial mode7,21,27, hence a single quantum memory. Moreover, each pair of temporal modes can be used to encode different time-bin qubits1, or more generally d modes can encode a qudit. Time-bin qubits are widely used in fibre-based quantum communication1,2 because of their resilience against polarization decoherence in fibres.
Temporal multimode storage is difficult, however, because of the scaling of the number of stored modes Nm as a function of optical depth d of the storage medium21,27. For EIT and Raman interactions, Nm scales as √d, making it very difficult to store many modes27. Recently, we proposed21 a multimode storage scheme based on atomic frequency combs (AFC) with a high intrinsic temporal multimode capacity21,27. Using this method, we recently showed22 that a weak coherent state |α〉L with mean photon number n̄=|α|2<1 can be coherently and reversibly mapped onto a YVO4 crystal doped with neodymium ions. Later experiments28,29,30,31 in other RE-doped materials have improved the overall storage efficiency (35%) and storage time (20 μs). Yet, in these experiments, only a maximum of four modes have actually been stored at the single-photon level; thus, the predicted21,27 high multimode capacity has yet to be shown experimentally. In this study, we show reversible mapping of 64 temporal modes containing weak coherent states at the single-photon level onto one atomic ensemble in a single spatial mode using an AFC-based light–matter interface.
Results
The light–matter interface
An AFC is based on a periodic modulation (with periodicity Δ) of the absorption profile of an inhomogeneously broadened optical transition |g〉→|e〉 (see Fig. 1). The modulation should ideally consist of sharp teeth (with full-width at half-maximum γ) having a high peak absorption depth d (see Fig. 1b). Such a modulation can be created by optical pumping techniques (see Experiment section and Methods). This requires an atomic ensemble with a static inhomogeneous broadening and many independently addressable spectral channels. This can be found in RE-doped solids in which inhomogeneous broadening is of the order of 1–10 GHz and the homogeneous linewidth is of the order of 1–100 kHz when cooled to <4 K. When a weak photonic coherent state |α〉L with n̄<1 is absorbed by the atoms in the comb, the state of the atoms can be written as |α〉A=|G〉+α|W〉+O(α2). Here, |G〉=|g1…gN〉 represents the ground atomic state and
represents one induced optical excitation delocalized over all the N atoms in the comb. In equation (1), zn is the position of atom n, k is the wave number of the single-mode light field, δn is the detuning of the atom with respect to light frequency and the amplitude cn depends on the frequency and spatial position of the particular atom n. The initial (at t=0) collective strong coupling between the light mode and atoms is rapidly lost because of inhomogeneous dephasing caused by exp(i2πδnt) phase factors. If we assume that the peaks are narrow compared with the periodicity (that is, a high comb finesse F=Δ/γ), then δn≈mnΔ (where mn is an integer) and the W state will rephase after a preprogrammed time T=1/Δ. The rephased collective state W will cause a strong emission in the forward direction (as defined by the absorbed light).
This type of photon-echo emission is also observed in accumulated or spectrally programmed photon echoes32,33,34,35, which inspired our proposal. Spectral atomic gratings have also been proposed36 and shown37 for coherent optical delay of streams of strong classical pulses. The interest in spectral gratings was recently renewed in the context of quantum memories, when it was realized how to achieve a much more efficient spectral grating than previously possible. In fact, a 100% efficient echo process is theoretically possible in a backward emission configuration21. This is possible because of the highly absorbing and sharp peaks in the AFC structure. In practice, the finite finesse of the comb still needs to be accounted for, which causes a partial loss of the collective state. However, in ref. 21 we show theoretically that F=10 induces a negligible loss, which in combination with a high optical depth d makes the AFC scheme very efficient. High-efficiency mapping using high-finesse combs have recently been shown experimentally28,30,31. These experiments and the present study store light for a predetermined time given by 1/Δ. We thus emphasize that we also proposed21 and experimentally showed29 a way to achieve on-demand readout by combining AFC with spin-wave storage. On-demand readout is a crucial resource for applications in quantum networks to render different quantum channels independent.
The multimode property of an AFC memory can easily be understood qualitatively. For a periodicity Δ and Np peaks, its total bandwidth is of the order of ∼NpΔ, indicating that a pulse of duration τ∼1/(NpΔ) can be stored. The multimode capacity stems from the fact that the grating can absorb a train of weak pulses before the first pulse is reemitted after T=1/Δ (see Fig. 1c). This simple calculation results in a multimode capacity Nm∝T/τ∝Np. Thus, a comb with many peaks, Np, allows us to create a highly multimode memory in the temporal domain. In this context, RE-doped solids are particularly interesting because of their high spectral channel density.
Experiment
In this study, we work with a neodymium-doped Y2SiO5 crystal, cooled to 3 K, having a transition wavelength at 883 nm with good coherence properties (see Methods for spectroscopic information). This wavelength is convenient as we can work with a diode laser and silicon-based single-photon counters having low noise (300 Hz) and high efficiency (32%).
The comb is prepared on the |g〉−|e〉 transition by frequency-selective pumping of atoms into an auxiliary state |aux〉 (see Fig. 1). There are different techniques for achieving this. For instance, by creating a large spectral hole and then transferring back atoms from an auxiliary state to create a comb, as used in ref. 29. Here, we use a technique similar to that employed in ref. 22, in which a series of pulses separated by a time, T, pump atoms from |g〉 to |aux〉 (through |e〉) with a power spectrum having a periodicity 1/T=Δ. This technique is also frequently used in accumulated photon-echo techniques32,37. Here, each pulse sequence consisted of three pulses in which the central pulse is π-dephased (see Fig. 3c). This sequence has a power spectrum with 'holes'. A Fourier analysis shows that the width of the holes in the power spectrum decreases when the number of pulses in the sequence increases, resulting in a higher comb finesse. In this experiment, three pulses were enough to reach the optimal comb finesse (F≈3) to achieve the maximal efficiency for our optical depth. We refer to the Methods section for more details on the preparation sequence.
The experimental sequence is divided into two parts: the preparation of AFC and the storage of weak pulses. To increase the efficiency of optical pumping during the preparation, and thus the depth of the comb, the pulse sequence was repeated 2,000 times, with a delay of 16 μs between each sequence. This is followed by a delay of 5 ms (≈17T1) to avoid fluorescence noise from atoms left in the excited state. During the storage sequence, 1,000 independent trials are performed at a repetition rate of 200 kHz. The entire preparation and storage sequence is then repeated with a rate of 5 Hz. An overview of the experimental setup is given in Fig. 2.
In Fig. 1c, we show storage experiments with predetermined storage times of T=100 ns and 1 μs, for a single temporal mode. The overall in–out mapping efficiencies, defined as the ratio of the output pulse counts to the input pulse counts, are ∼6 and ∼1%, respectively (see inset of Fig. 1c). In the Methods section, we present a theoretical analysis of the efficiency performance. The efficiency for single-mode storage is currently lower than that achieved in best-performance single-mode memories, for example, those given in refs 13,16,17,20,28,30,3813, 16, 17, 20, 28, 30, 38. However, as explained later, our interface compares very favourably with these experiments in terms of potential multimode storage efficiency.
Multimode storage results
The main goal of this study is to show high multimode storage. Following the discussion above, we should maximize the number of peaks in the comb. This can be carried out by increasing the density of peaks in a given spectral region (that is, increasing the storage time T) or by changing the width of the AFC (that is, increasing the bandwidth). Here, we fix the storage time to T=1.3 μs, by which we reach an efficiency of ≳1%, and concentrate our efforts on increasing the bandwidth. The spectral width of the grating is essentially given by the width of the power spectrum of the preparation sequence, which, using the pulse sequence described above, only results in a width of about 20–30 MHz. We can, however, substantially increase the total width by inserting more pulses in the preparation sequence, which are shifted in frequency (see Fig. 3c). We thus optically pump atoms over a much larger frequency range. Note that the frequency shift should be a multiple of Δ to form a grating without discontinuities. In this way, we managed to extend the bandwidth of the interface to 100 MHz, as shown in Fig. 3a, without significantly affecting the AFC echo efficiency. This is illustrated in Fig. 3b, in which we show storage efficiency as a function of the duration of the input pulse when the preparation sequence contains a single or five frequencies. The maximum bandwidth allows us to map short, ≲5 ns pulses into memory.
In addition to the present motivation for multimode storage, a large bandwidth is equally interesting for interfacing a memory with non-classical single-photon or photon-pair sources. These usually have a large intrinsic bandwidth that requires extensive filtering for matching bandwidths. In this case, our extended bandwidth (×5) would require a corresponding factor of less filtering.
We show the high multimode capacity of our interface by storing 64 temporal modes during a predetermined time of 1.3 μs (see Fig. 4), with an overall efficiency of 1.3%. This capacity is more than an order of magnitude higher than that previously achieved for multiplexing a quantum memory in a single spatial mode16,22. As shown, we can store a random sequence of weak coherent states. Storage of random trains of single-photon states has been proposed for multiplexing long-distance quantum communication systems on the basis of the so-called quantum repeaters5,6. The maximum rate of communication would then be proportional to the number of modes that can be stored7. Our experiment clearly shows the gain that can be made using an AFC-based quantum memory. It thus opens up a route towards achieving efficient quantum communication using quantum repeaters.
It is now possible to use consecutive temporal modes |k〉 and |k+1〉 to encode time-bin qubits
in which case, a good coherence between modes is crucial. The coherence can be measured by preparing superposition states and performing projective measurements using an interferometric setup. Projective measurements on time-bin qubits are usually performed using an imbalanced Mach–Zehnder interferometer, in which consecutive time bins interfere1. We can perform the same task with our light–matter interface using a double-AFC scheme (with Δ1 and Δ2) as shown in ref. 22. In short, the difference in delay 1/Δ1−1/Δ2 is the delay in an imbalanced Mach–Zehnder interferometer. The technique used for preparing a double-AFC structure is explained in Methods. As shown in Fig. 5, we observe excellent coherence over all modes with an average visibility of V=86±3%, corresponding to a conditional qubit fidelity of F=(1+V)/2≈93%.
To further illustrate our ability to store multimode light states, we create a light pulse with a random amplitude modulation. As shown in Fig. 6, we can faithfully store this kind of light pulse. The possibility of storing weak arbitrary light states using photon-echo-based schemes was pointed out already by Kraus et al. (ref. ). We believe that this work, in which complex phase and amplitude information are reversible and coherently mapped onto one atomic ensemble, is the first experimental realization showing these properties at the single-photon level.
Discussion
For temporal multimode storage, the efficiency of our interface would outperform the current EIT and Raman-based quantum memories in homogeneously broadened media, although impressive efficiencies have been achieved for single-mode storage13,23. This is because of the poor scaling of efficiency as a function of the number of modes for a given optical depth27. It would also compare favourably with the recent few modes storage experiment16 using gradient echo memory, another echo-based storage scheme, also because of the scaling of mode capacity for a given optical depth (Nm∼d)7,27. Nevertheless, an increase in storage efficiency and on-demand readout are necessary for applications in quantum communication.
The next grand challenge is to combine multimode storage, high efficiency30 and on-demand readout29 in one experiment. The immediate efforts will most probably be devoted to praseodymium- and europium-doped Y2SiO5 crystals, in which the crystal-field ground state has the necessary number of spin levels (three levels) for implementing the on-demand readout. The recent achievements in praseodymium-doped Y2SiO5 crystals are very encouraging29,30, although the bandwidth was limited to a few MHz because of the hyperfine level splitting. Europium-doped Y2SiO5 has the potential of offering higher bandwidths (up to 70 MHz) and narrower comb peaks, which result in a higher multimode capacity21. To exploit the high-bandwidth results reported in this work, using neodymium-doped crystals, one needs to find a third spin level with a long spin coherence lifetime. An interesting path forward is to investigate neodymium isotopes with a hyperfine structure (143Nd and 145Nd)39. Recent results on a similar system40, 167Er3+:CaWO4, show coherence times approaching 100 μs for hyperfine transitions. Clearly, this path requires extensive spectroscopic studies to optimize the spin population and coherence lifetimes. However, it is very interesting, as it opens up several material candidates (for example, doped with erbium41 and neodymium) for quantum memory applications.
To summarize, we have shown the reversible mapping of up to 64 optical temporal modes at the single-photon level onto one solid-state atomic ensemble. We have shown that the quantum coherence of the stored modes is preserved to a high extent. The different modes can then be used to encode multiple time-bin photonic qubits. Alternatively, they could also be considered as high-dimensional qudit states. This opens up possibilities to store higher dimensional quantum states such as entangled qudits encoded in time-bin bases42. Our experiment opens the way to multiqubit quantum memories, which are a crucial requirement for realistic quantum networks.
Methods
Sample
The sample is a 10 mm-long neodymium-doped yttrium orthosilicate crystal (Nd3+:Y2SiO5) with a low Nd3+ concentration of 30 p.p.m. The inhomogeneous broadening of the 4I9/2–4F3/2 absorption line is around 6 GHz and the optical depth is 1.5 for this sample (in single-pass configuration), when the polarization of the light is along the D1 crystallographic axis. We measured an excited state lifetime of T1=300 μs using fluorescence spectroscopy and stimulated photon echoes. With conventional photon echoes (two-pulse), we measured a homogeneous linewidth of 3.5 kHz (T2=90 μs) for a magnetic field of 300 mT and temperature of 3 K. Each level is a Kramer's doublet that splits into two spin states in a magnetic field. For the field orientation (at 30° relative to the D2 axis) used in this experiment, we measured g-factors of gg=2.6 and ge=0.5. In a 300 mT magnetic field, the ground and excited states were thus separated by 10.9 and 2.1 GHz. We measured a ground state Zeeman population relaxation lifetime of around T1Z=100 ms by spectral hole burning. In the spectral hole-burning measurements, we also observed a superhyperfine interaction of neodymium ions with yttrium. This causes additional spectral side holes at around 640 kHz (for the present magnetic field), thus the effective homogeneous linewidth is around 1 MHz. This was our main limitation for the efficiency of our light–matter interface, as it affected our ability to create a good comb for longer storage times (1/Δ≈1 μs).
Experimental setup
We present more details on the optical setup shown in Fig. 2. We used a diode laser that is actively frequency stabilized (<100 kHz), using a spectral hole as reference. The output was split into two beams using a polarization beam splitter. Each beam could be amplitude, frequency and phase modulated using double-pass acousto-optic modulators. One beam was used for creating preparation pulses and the other one for creating the weak pulses to be stored (strongly attenuated using neutral density filters). In the weak path, an additional electro-optic amplitude modulator was used to create short-input pulses for the multimode storage experiments. The paths were mode overlapped using a fibre-coupled beam combiner. The light was sent through the crystal, again in free space, in a double-pass setup to double the optical depth to d=3. Using a Faraday rotator and a λ/2 plate before the crystal, we could separate the input and output modes on the polarization beam splitter, while keeping a constant linear polarization optimized for maximum absorption in the crystal. Output light was collected with a multimode fibre and detected by a silicon single-photon counter. Two synchronized mechanical choppers blocked the detector during the preparation sequence and blocked the preparation beam during the storage sequence. The transmission between the input of the cryostat and the detector was typically between 25 and 30%.
Comb preparation
We now explain in more detail the preparation sequence allowing us to create the desired comb. The goal is to optically pump atoms from |g〉 to |aux〉 in a frequency-selective manner (see Fig. 1a), wherein the atoms left in |g〉 will form the comb. This can be achieved by two pulses of duration τ separated by time T, as done in ref.22 22, which has a power spectrum of width ∼1/τ with a sinusoidal modulation of periodicity 1/T. To create a sharper comb structure having higher finesse, it is useful to have a wide power spectrum with sharp 'holes' instead of the sinusoidal modulation above. This can be achieved by increasing the number of pulses in the sequence in which the central pulse is π-dephased and has a field amplitude corresponding to the sum of the amplitudes of the side pulses (see Fig. 3c). In frequency space, the short and intense central pulse interferes destructively with the periodic spectrum of the side pulses, creating a wide power spectrum with the desired holes. From this simple Fourier argument, it is clear that the width of these holes in the spectrum is proportional to the number of pulses. In our study, the optimal finesse is close to 3 for the optical depth of our material, in which case, three pulses were enough to achieve this finesse.
For the interference experiment, shown in Fig. 5, one temporal input mode must be split into two possible temporal output modes. For this purpose, we can create two superimposed combs, with a different periodicity Δi. An incoming photon then has an equal probability of being absorbed by either of the combs and will consequently be reemitted as a coherent superposition of the two corresponding output modes. To create two combs with periodicity Δ1 and Δ2, we use the sequence shown in Supplementary Fig. S3. A sequence with N=3 pulses separated by τ1 is superposed with another sequence of N=3 pulses separated by τ2, with the central pulse of each sequence being centred at t=0. Thus, the total number of pulses will be 2N−1=5, and the pulse area of the central one should be equal to the sum of the others in order to achieve the appropriate interference effect in the power spectrum.
It is also possible to impose a phase change φ on the output mode related to a particular comb. This is achieved by frequency shifting the corresponding comb by a fraction of the comb spacing Δ, as discussed in ref. 21. To do so using our preparation method, we must add a phase to each pulse preparing the corresponding comb (see Supplementary Fig. S3). If we label the pulses with k=±1, ±2, ±3… (excluding the central pulse), then the phase of each pulse should be kφ. It is straightforward to show by Fourier analysis that the corresponding power spectrum will see a frequency shift in the position of the holes, which in turn will cause a shift in the position of the created comb.
Storage efficiency analysis
Efficiency can be calculated theoretically using the formula21,22
. The different terms can be given a qualitative understanding. The first term represents collective coupling, the second the reabsorption of the reemitted light, the third is an intrinsic dephasing factor due to finesse and the last term is a loss due to an absorption background d0. For the comb with Δ=10 MHz, we measure d≈1.7, F≈2.7 and d0≈0.5 (see Fig. 1b), resulting in a theoretical efficiency of η≈5% in close agreement with the experiment (see Fig. 1c). The major limiting factor here is d0 (caused by an imperfect preparation of the comb) and then the optical depth of the comb d (the finesse being close to optimum for this d, see ref. ). The decrease in efficiency for longer storage time periods (see inset of Fig. 1c) is principally due to an increase in background absorption d0 and an accompanying decrease in peak absorption d. This in turn is caused by the effective spectral resolution of 1 MHz in optical pumping, which is a limitation of the present material (see Methods above). Yet, the storage efficiency is between one and two orders of magnitude higher than that which we achieved in the material Nd:YVO422, which we attribute to an improvement in optical pumping in this neodymium-doped material.
Additional information
How to cite this article: Usmani, I. et al. Mapping multiple photonic qubits into and out of one solid-state atomic ensemble. Nat. Commun. 1:12 doi: 10.1038/ncomms1010 (2010).
References
Gisin, N. & Thew, R. Quantum communication. Nat. Photonics 1, 165–171 (2007).
Gisin, N., Ribordy, G., Tittel, W. & Zbinden, H. Quantum cryptography. Rev. Mod. Phys. 74, 145–195 (2002).
Bennett, C. H., Brassard, G., Crépeau, C., Jozsa, R., Peres, A. & Wootters, W.K. Teleporting an unknown quantum state via dual classical and Einstein-Podolsky-Rosen channels. Phys. Rev. Lett. 70, 1895 (1993).
Kimble, H. J. The quantum internet. Nature 453, 1023–1030 (2008).
Duan, L. -M., Lukin, M. D., Cirac, J. I. & Zoller, P. Long-distance quantum communication with atomic ensembles and linear optics. Nature 414, 413–418 (2001).
Sangouard, N., Simon, C., de Riedmatten, H. & Gisin, N. Quantum repeaters based on atomic ensembles and linear optics. Preprint at 〈http://arxiv.org/abs/0906.2699〉 (2009).
Simon, C., de Riedmatten, H., Afzelius, M., Sangouard, N., Zbinden, H. & Gisin, N. Quantum repeaters with photon pair sources and multimode memories. Phys. Rev. Lett. 98, 190503 (2007).
Hammerer, K., Sørensen, A. & Polzik, E. Quantum interface between light and atomic ensembles. Preprint at 〈http://arxiv.org/abs/0807.3358〉 (2008).
Sun, Y., Thiel, C. W., Cone, R. L., Equall, R. W. & Hutcheson, R. L. Recent progress in developing new rare earth materials for hole burning and coherent transient applications. J. Lumin. 98, 281–287 (2002).
Longdell, J. J., Fraval, E., Sellars, M. J. & Manson, N. B. Stopped light with storage times greater than one second using electromagnetically induced transparency in a solid. Phys. Rev. Lett. 95, 063601 (2005).
Chanelière, T., Matsukevich, D. N., Jenkins, S. D., Lan, S. -Y., Kennedy, T. A. B. & Kuzmich, A. Storage and retrieval of single photons transmitted between remote quantum memories. Nature 438, 833–836 (2005).
Eisaman, M. D., André, A., Massou, F., Fleischhauer, M., Zibrov, A. S. & Lukin, M. D. Electromagnetically induced transparency with tunable single-photon pulses. Nature 438, 837–841 (2005).
Choi, K. S., Deng, H., Laurat, J. & Kimble, H. J. Mapping photonic entanglement into and out of a quantum memory. Nature 452, 67–71 (2008).
Julsgaard, B., Sherson, J., Cirac, J. I., Fiurášek, J. & Polzik, E. S. Experimental demonstration of quantum memory for light. Nature 432, 482–486 (2004).
Nunn, J. et al. Mapping broadband single-photon wave packets into an atomic memory. Phys. Rev. A 75, 011401 (2007).
Hosseini, M., Sparkes, B. M., Hétet, G., Longdell, J. J., Lam, P. K. & Buchler, B.C. Coherent optical pulse sequencer for quantum applications. Nature 461, 241–245 (2009).
Reim, K. F. et al. Towards high-speed optical quantum memories. Advance online publication; doi:10.1038/nphoton.2010.30. Preprint at 〈http://arxiv.org/abs/0912.2970〉 (2009).
Moiseev, S. A. & Kröll, S. Complete reconstruction of the quantum state of a single-photon wave packet absorbed by a Doppler-broadened transition. Phys. Rev. Lett. 87, 173601 (2001).
Kraus, B., Tittel, W., Gisin, N., Nilsson, M., Kröll, S. & Cirac, J. I. Quantum memory for nonstationary light fields based on controlled reversible inhomogeneous broadening. Phys. Rev. A 73, 020302 (2006).
Hétet, G., Longdell, J. J., Alexander, A. L., Lam, P. K. & Sellars, M. J. Electro-optic quantum memory for light using two-level atoms. Phys. Rev. Lett. 100, 023601 (2008).
Afzelius, M., Simon, C., de Riedmatten, H. & Gisin, N. Multimode quantum memory based on atomic frequency combs. Phys. Rev. A 79, 052329 (2009).
de Riedmatten, H., Afzelius, M., Staudt, M. U., Simon, C. & Gisin, N. A solid-state light-matter interface at the single-photon level. Nature 456, 773–777 (2008).
Simon, J., Tanji, H., Thompson, J. K. & Vuletic, V. Interfacing collective atomic excitations and single photons. Phys. Rev. Lett. 98, 183601 (2007).
Zhao, B. et al. A millisecond quantum memory for scalable quantum networks. Nat. Phys. 5, 95–99 (2009).
Zhao, R. et al. Long-lived quantum memory. Nat. Phys. 5, 100–104 (2009).
Lan, S. -Y., Radnaev, A. G., Collins, O. A., Matsukevich, D. N., Kennedy, T. A. & Kuzmich, A. A multiplexed quantum memory. Opt. Express 17, 13639–13645 (2009).
Nunn, J. et al. Multimode memories in atomic ensembles. Phys. Rev. Lett. 101, 260502 (2008).
Chanelière, T., Ruggiero, J., Bonarota, M., Afzelius, M. & Le Gouët, J. L. Efficient light storage in a crystal using an atomic frequency comb. New J. Phys. 12, 023025 (2009).
Afzelius, M. et al. Demonstration of atomic frequency comb memory for light with spin-wave storage. Phys. Rev. Lett. 104, 040503 (2010).
Amari, A. et al. Towards an efficient atomic frequency comb quantum memory. In press, corrected proof: doi:10.1016/j.jlumin.2010.01.012. Preprint at 〈http://arxiv.org/abs/0911.2145〉 (2009).
Sabooni, M. et al. Storage and recall of weak coherent optical pulses with an efficiency of 25%. Preprint at 〈http://arxiv.org/abs/0912.2525〉 (2009).
Hesselink, W. H. & Wiersma, D. A. Picosecond photon echoes stimulated from an accumulated grating. Phys. Rev. Lett. 43, 1991–1994 (1979).
Carlson, N. W., Bai, Y. S., Babbitt, W. R. & Mossberg, T.W. Temporally programmed free-induction decay. Phys. Rev. A 30, 1572–1574 (1984).
Mitsunaga, M., Yano, R. & Uesugi, N. Spectrally programmed stimulated photon echo. Opt. Lett. 16, 264–266 (1991).
Schwoerer, H., Erni, D., Rebane, A. & Wild, U. P. Subpicosecond pulse shaping via spectral hole-burning. Opt. Commun. 107, 123–128 (1994).
Merkel, K. D. & Babbitt, W. R. Optical coherent-transient true-time-delay regenerator. Opt. Lett. 21, 1102–1104 (1996).
Tian, M., Reibel, R. & Babbitt, W. R. Demonstration of optical coherent transient true-time delay at 4 Gbits/s. Opt. Lett. 26, 1143–1145 (2001).
Novikova, I., Gorshkov, A. V., Phillips, D. F., Sørensen, A. S., Lukin, M. D. & Walsworth, R. L. Optimal control of light pulse storage and retrieval. Phys. Rev. Lett. 98, 243602 (2007).
Macfarlane, R. M., Meltzer, R. S. & Malkin, B. Z. Optical measurement of the isotope shifts and hyperfine and superhyperfine interactions of Nd in the solid state. Phys. Rev. B 58, 5692–5700 (1998).
Bertaina, S. et al. Rare-earth solid-state qubits. Nat. Nanotechnol. 2, 39–42 (2007).
Lauritzen, B. et al. Telecommunication-wavelength solid-state memory at the single photon level. Phys. Rev. Lett. 104, 080502 (2009).
de Riedmatten, H., Marcikic, I., Scarani, V., Tittel, W., Zbinden, H. & Gisin, N. Tailoring photonic entanglement in high-dimensional Hilbert spaces. Phys. Rev. A 69, 050304 (2004).
Acknowledgements
We acknowledge financial support from the Swiss NCCR Quantum Photonics, the EC projects Qubit Applications (QAP) and the ERC Advanced Grant (QORE). We also acknowledge useful discussions with Christoph Simon and Nicolas Sangouard.
Author information
Authors and Affiliations
Contributions
I.U. built the experimental setup, carried out the experiment and analysed the data, which were supervised by M.A. and H.d.R. All authors contributed to the conception and analysis of the experiment and to the writing of the paper.
Corresponding authors
Ethics declarations
Competing interests
The authors declare no competing financial interests.
Supplementary information
Supplementary Figures
Supplementary Figures S1-S3 (PDF 211 kb)
Rights and permissions
About this article
Cite this article
Usmani, I., Afzelius, M., de Riedmatten, H. et al. Mapping multiple photonic qubits into and out of one solid-state atomic ensemble. Nat Commun 1, 12 (2010). https://doi.org/10.1038/ncomms1010
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/ncomms1010
This article is cited by
-
Quantum storage of entangled photons at telecom wavelengths in a crystal
Nature Communications (2023)
-
Rare-earth quantum memories: The experimental status quo
Frontiers of Physics (2023)
-
Non-classical correlations over 1250 modes between telecom photons and 979-nm photons stored in 171Yb3+:Y2SiO5
Nature Communications (2022)
-
Storage of photonic time-bin qubits for up to 20 ms in a rare-earth doped crystal
npj Quantum Information (2022)
-
Towards entanglement distillation between atomic ensembles using high-fidelity spin operations
Communications Physics (2022)
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.