-
Tailoring Microemulsification Techniques for the Encapsulation of Diverse Cargo: A Systematic Analysis of Poly (Urea-Formaldehyde) Microcapsules
-
Graphene in 3D Bioprinting
-
Generation of Pearl/Calcium Phosphate Composite Particles and Their Integration into Porous Chitosan Scaffolds for Bone Regeneration
Journal Description
Journal of Functional Biomaterials
Journal of Functional Biomaterials
is an international, interdisciplinary, peer-reviewed, open access journal on materials for biomedical use and is published monthly online by MDPI.
- Open Access— free for readers, with article processing charges (APC) paid by authors or their institutions.
- High Visibility: indexed within Scopus, SCIE (Web of Science), PubMed, PMC, Embase, Inspec, CAPlus / SciFinder, AGRIS, and other databases.
- Journal Rank: JCR - Q1 (Engineering, Biomedical) / CiteScore - Q2 (Biomedical Engineering)
- Rapid Publication: manuscripts are peer-reviewed and a first decision is provided to authors approximately 15.8 days after submission; acceptance to publication is undertaken in 2.7 days (median values for papers published in this journal in the first half of 2024).
- Recognition of Reviewers: reviewers who provide timely, thorough peer-review reports receive vouchers entitling them to a discount on the APC of their next publication in any MDPI journal, in appreciation of the work done.
Impact Factor:
5.0 (2023);
5-Year Impact Factor:
5.5 (2023)
Latest Articles
Antibacterial Effect of Silver Nanoparticles against Oral Biofilms in Subjects with Motor and Intellectual Disabilities
J. Funct. Biomater. 2024, 15(7), 191; https://doi.org/10.3390/jfb15070191 - 10 Jul 2024
Abstract
Background: Motor and intellectual disabilities (MIDs) represent a great challenge for maintaining general health due to physical and cognitive limitations, particularly in the maintenance and preservation of oral health. Silver nanoparticles (AgNPs) have emerged as a promising therapeutic tool for bacterial control, including
[...] Read more.
Background: Motor and intellectual disabilities (MIDs) represent a great challenge for maintaining general health due to physical and cognitive limitations, particularly in the maintenance and preservation of oral health. Silver nanoparticles (AgNPs) have emerged as a promising therapeutic tool for bacterial control, including oral biofilms; however, knowledge of the bactericidal effectiveness of oral biofilms from patients with MIDs is insufficient. This study aims to determine the antimicrobial effect of AgNPs on different oral biofilms taken from patients with and without MIDs. Methods: Two sizes of AgNPs were prepared and characterized by dynamic light scattering (DLS) and transmission electron microscopy (TEM). Through consecutive sampling, biofilm samples were collected from 17 subjects with MIDs and 20 subjects without disorders. The antimicrobial effect was determined by obtaining the minimum inhibitory concentration (MIC) of AgNPs, and the identification and distribution of oral bacterial species were determined by polymerase chain reaction (PCR). Finally, correlations between sociodemographic characteristics and the antimicrobial levels of AgNPs were also explored. The values of the MIC results were analyzed with IBM-SPSS software (version25) using non-parametric tests for independent groups and correlations, with statistical significance being considered as p < 0.05. Results: Both sizes of AgNPs exhibited tight particle size distributions (smaller: 10.2 ± 0.7 nm; larger: 29.3 ± 2.3 nm) with zeta potential values (−35.0 ± 3.3 and −52.6 ± 8.5 mV, respectively) confirming the stability that resulted in little to no agglomeration of nanoparticles. Although both sizes of AgNPs had good antimicrobial activity in all oral biofilms, the smallest particles had the best antimicrobial effects on the oral biofilm samples from patients with and without MIDs, even better than chlorhexidine (CHX) (p < 0.05). Likewise, the patients with disabilities showed higher levels of antimicrobial sensitivity to AgNPs compared with CHX (p < 0.05). Although the microorganisms included in the biofilms of females had a statistically higher growth level, the AgNP antimicrobial effect was statistically similar in both genders (p > 0.05). The most frequent bacteria for all oral biofilms were S. mutans (100%), P. intermedia (91.6%), T. forsythia (75.0%), T. denticola (75.0%), P. gingivalis (66.6%), F. nucleatum (66.6%), S. sobrinus (50.0%), and A. actinomycetemcomitans (8.3%). Conclusions: AgNPs exhibited considerable antimicrobial potential to be used as a complementary and alternative tool in maintaining and preserving oral health in patients with MIDs.
Full article
(This article belongs to the Special Issue Antibacterial Biomaterials for Medical Applications)
►
Show Figures
Open AccessArticle
Electrophoretic Deposition of Chitosan Coatings on the Porous Titanium Substrate
by
Julia Flesińska, Magdalena Szklarska, Izabela Matuła, Adrian Barylski, Sylwia Golba, Julia Zając, Maciej Gawlikowski, Przemysław Kurtyka, Barbara Ilnicka and Grzegorz Dercz
J. Funct. Biomater. 2024, 15(7), 190; https://doi.org/10.3390/jfb15070190 - 9 Jul 2024
Abstract
Medicine is looking for solutions to help implant patients recover more smoothly. The porous implants promote osteointegration, thereby providing better stabilization. Introducing porosity into metallic implants enhances their biocompatibility and facilitates osteointegration. The introduction of porosity is also associated with a reduction in
[...] Read more.
Medicine is looking for solutions to help implant patients recover more smoothly. The porous implants promote osteointegration, thereby providing better stabilization. Introducing porosity into metallic implants enhances their biocompatibility and facilitates osteointegration. The introduction of porosity is also associated with a reduction in Young’s modulus, which reduces the risk of tissue outgrowth around the implant. However, the risk of chronic inflammation remains a concern, necessitating the development of coatings to mitigate adverse reactions. An interesting biomaterial for such modifications is chitosan, which has antimicrobial, antifungal, and osteointegration properties. In the present work, a porous titanium biomaterial was obtained by powder metallurgy, and electrophoretic deposition of chitosan coatings was used to modify its surface. This study investigated the influence of ethanol content in the deposition solution on the quality of chitosan coatings. The EPD process facilitates the control of coating thickness and morphology, with higher voltages resulting in thicker coatings and increased pore formation. Ethanol concentration in the solution affects coating quality, with higher concentrations leading to cracking and peeling. Optimal coating conditions (30 min/10 V) yield high-quality coatings, demonstrating excellent cell viability and negligible cytotoxicity. The GIXD and ATR-FTIR analysis confirmed the presence of deposited chitosan coatings on Ti substrates. The microstructure of the chitosan coatings was examined by scanning electron microscopy. Biological tests showed no cytotoxicity of the obtained materials, which allows for further research and the possibility of their use in medicine. In conclusion, EPD offers a viable method for producing chitosan-based coatings with controlled properties for biomedical applications, ensuring enhanced patient outcomes and implant performance.
Full article
(This article belongs to the Special Issue Advances in Biomedical Alloys and Surface Modification)
►▼
Show Figures
![](https://pub.mdpi-res.com/jfb/jfb-15-00190/article_deploy/jfb-15-00190-ag.jpeg?1720531941)
Graphical abstract
Open AccessReview
The Impact of the Dermal Matrix in Tissue Reconstruction: A Bibliometric Perspective in Plastic Surgery
by
Daniel Pit, Bogdan Hoinoiu, Razvan Bardan and Teodora Hoinoiu
J. Funct. Biomater. 2024, 15(7), 189; https://doi.org/10.3390/jfb15070189 - 9 Jul 2024
Abstract
In the vast field of medical scientific research, few topics have managed to attract as much attention and mobilise academic resources as the use of dermal matrices in the reconstruction of soft tissue defects. In this study, we used bibliographic metrics such as
[...] Read more.
In the vast field of medical scientific research, few topics have managed to attract as much attention and mobilise academic resources as the use of dermal matrices in the reconstruction of soft tissue defects. In this study, we used bibliographic metrics such as co-authorship, keyword co-occurrence, and citations per document to analyse the relationship between the use of dermal matrices to reconstruct soft tissue defects caused by burns, tumours, and trauma. In addition, keyword analysis has highlighted the crucial role of technology in recent studies and the innovation brought about by the use of dermal matrices in the reconstruction of soft tissue defects. Keywords used in recent studies have revealed the critical role of technology in the development of the field. We extracted a set of 1329 research papers from the Web of Science Core Collection database between 2010 and 2024 that met our criteria. Through keyword analysis, we identified technology as a significant factor in recent studies. Our results showed that there is very little collaboration between authors on the topic and that most of them are from Asia. A significant number of articles on this topic come from the USA, China, Japan, Germany, the UK, and France. We discovered the top ten most cited sources analysing the use of dermal matrices in the reconstruction of soft tissue defects. Finally, we think that this study will be beneficial for our further research.
Full article
(This article belongs to the Special Issue Application of Biomaterials in Tissue Engineering and Regenerative Medicine)
Open AccessReview
Current Advances in Nanomaterials Affecting Functions and Morphology of Platelets
by
Dongxin Peng, Sujing Sun, Man Zhao, Linsheng Zhan and Xiaohui Wang
J. Funct. Biomater. 2024, 15(7), 188; https://doi.org/10.3390/jfb15070188 - 8 Jul 2024
Abstract
Nanomaterials have been extensively used in the biomedical field due to their unique physical and chemical properties. They promise wide applications in the diagnosis, prevention, and treatment of diseases. Nanodrugs are generally transported to target tissues or organs by coupling targeting molecules or
[...] Read more.
Nanomaterials have been extensively used in the biomedical field due to their unique physical and chemical properties. They promise wide applications in the diagnosis, prevention, and treatment of diseases. Nanodrugs are generally transported to target tissues or organs by coupling targeting molecules or enhanced permeability and retention effect (EPR) passively. As intravenous injection is the most common means of administration of nanomedicine, the transport process inevitably involves the interactions between nanoparticles (NPs) and blood cells. Platelets are known to not only play a critical role in normal coagulation by performing adhesion, aggregation, release, and contraction functions, but also be associated with pathological thrombosis, tumor metastasis, inflammation, and immune reactions, making it necessary to investigate the effects of NPs on platelet function during transport, particularly the way in which their physical and chemical properties determine their interaction with platelets and the underlying mechanisms by which they activate and induce platelet aggregation. However, such data are lacking. This review is intended to summarize the effects of NPs on platelet activation, aggregation, release, and apoptosis, as well as their effects on membrane proteins and morphology in order to shed light on such key issues as how to reduce their adverse reactions in the blood system, which should be taken into consideration in NP engineering.
Full article
(This article belongs to the Section Biomaterials and Devices for Healthcare Applications)
►▼
Show Figures
![](https://pub.mdpi-res.com/jfb/jfb-15-00188/article_deploy/html/images/jfb-15-00188-ag-550.jpg?1720423330)
Graphical abstract
Open AccessArticle
Synergistic Effect of Polyethylene Glycol and Lactic Acid on Handling Properties and Antibacterial Efficacy of Premixed Calcium Silicate Cement
by
Yi-Huei Huang, I-Ting Wu, Chun-Cheng Chen and Shinn-Jyh Ding
J. Funct. Biomater. 2024, 15(7), 187; https://doi.org/10.3390/jfb15070187 - 5 Jul 2024
Abstract
Calcium silicate (CaSi) bone cement with antibacterial and osteogenic properties has attracted significant interest. However, there is a need to develop a variety of new premixed bone cement to meet the clinical requirements of fast setting time, ease of handling, and efficient antibacterial
[...] Read more.
Calcium silicate (CaSi) bone cement with antibacterial and osteogenic properties has attracted significant interest. However, there is a need to develop a variety of new premixed bone cement to meet the clinical requirements of fast setting time, ease of handling, and efficient antibacterial properties. In this study, different volume ratios of polyethylene glycol (PEG) and lactic acid liquids were added to calcium silicate, and the effects of varying liquid-to-powder ratios (L/P) were examined. This study assessed the physicochemical properties, cytotoxicity, and antibacterial activity against S. aureus and E. coli of this premixed cement. The results from the experiments indicated that lactic acid significantly reduced the setting time of the CaSi-based cement and enhanced its mechanical strength. Furthermore, the appropriate concentration of lactic acid and matching L/P ratio improved its washout resistance. The cell viability of all premixed cement was found to be over 80%. The premixed cement containing PEG and lactic acid exhibited superior antibacterial properties compared to the CaSi control. Based on its setting time, washout resistance, and antibacterial activity, a premixed cement with a liquid phase of 80% PEG and 20% lactic acid at an L/P ratio of 0.4 appeared promising for use in dental and orthopedic practice.
Full article
(This article belongs to the Special Issue Antibacterial Biomaterials for Medical Applications)
►▼
Show Figures
![](https://pub.mdpi-res.com/jfb/jfb-15-00187/article_deploy/html/images/jfb-15-00187-g001-550.jpg?1720169586)
Figure 1
Open AccessArticle
Chitosan–Gelatin Scaffolds Loaded with Different Antibiotic Formulations for Regenerative Endodontic Procedures Promote Biocompatibility and Antibacterial Activity
by
Maha Alghofaily, Aljowhara Almana, Jenan Alrayes, Rhodanne Lambarte, Michael D. Weir and Fahd Alsalleeh
J. Funct. Biomater. 2024, 15(7), 186; https://doi.org/10.3390/jfb15070186 - 4 Jul 2024
Abstract
Background: This study investigated the biocompatibility and antibacterial efficacy of chitosan–gelatin (CH-G) scaffolds loaded with slow-releasing antibiotic formulations used in regeneration endodontic procedures (REPs). Methods: Scaffolds were fabricated using freeze drying and loaded with varying concentrations of augmentin or modified triple antibiotic paste
[...] Read more.
Background: This study investigated the biocompatibility and antibacterial efficacy of chitosan–gelatin (CH-G) scaffolds loaded with slow-releasing antibiotic formulations used in regeneration endodontic procedures (REPs). Methods: Scaffolds were fabricated using freeze drying and loaded with varying concentrations of augmentin or modified triple antibiotic paste (mTAP). High-resolution scanning electron microscopy (SEM) was used to characterize the scaffold, while drug release was monitored via UV-Vis spectrophotometry. Immortalized human mesenchymal stem cells (hMSCs) were cultured on CH-G scaffolds alone (control), either 0.1 mg/mL or 1 mg/mL of augmentin or mTAP, and 10 mg/mL calcium hydroxide (Ca(OH)2). Cell viability and proliferation were assessed using the Alamar Blue assay and SEM, respectively, and live/dead staining further corroborated cell viability. Antibacterial activity against Enterococcus faecalis was evaluated using the MTT assay and confocal laser scanning microscopy (CLSM). Results: Augmentin at 0.1 mg/mL appeared to promote better cell growth and attachment within the scaffolds than all other formulations, exhibiting acceptable viability. SEM revealed improved cell attachment in augmentin and mTAP groups compared to the Ca(OH)2 group. Augmentin at 1 mg/mL and mTAP groups significantly reduced viable bacteria compared to controls. Augmentin groups and mTAP at 1 mg/mL were highly effective in eliminating E. faecalis biofilms, with mTAP potentially causing more cell death within the remaining biofilm structures. Conclusions: This study suggests that CH-G scaffolds loaded with augmentin and mTAP, particularly at a concentration of 1 mg/mL, offer promising advantages for REPs due to their biocompatibility, antibacterial efficacy, and ability to promote cell attachment. Further research may explore the long-term effects in clinical settings.
Full article
(This article belongs to the Special Issue Advanced Materials for Clinical Endodontic Applications (2nd Edition))
►▼
Show Figures
![](https://pub.mdpi-res.com/jfb/jfb-15-00186/article_deploy/html/images/jfb-15-00186-g001-550.jpg?1720696228)
Figure 1
Open AccessArticle
A Type of Ferrocene-Based Derivative FE-1 COF Material for Glycopeptide and Phosphopeptide Selective Enrichment
by
Yu Wu, Sen Xu, Fengjuan Ding, Weibing Zhang and Haiyan Liu
J. Funct. Biomater. 2024, 15(7), 185; https://doi.org/10.3390/jfb15070185 - 4 Jul 2024
Abstract
In this work, a new type of FE-1 COF material is prepared by a reversible imine condensation reaction with diaminoferrocene and diaminodiformaldehyde as materials. The material is connected by imine bonds to form a COF skeleton, and the presence of plenty of nitrogen-containing
[...] Read more.
In this work, a new type of FE-1 COF material is prepared by a reversible imine condensation reaction with diaminoferrocene and diaminodiformaldehyde as materials. The material is connected by imine bonds to form a COF skeleton, and the presence of plenty of nitrogen-containing groups gives the material good hydrophilicity; the presence of metal Fe ions provides the material application potential in the enrichment of phosphopeptides. According to the different binding abilities of N-glycopeptide and phosphopeptide on FE-1 COF, it can simultaneously enrich N-glycopeptide and phosphopeptide through different elution conditions to realize its controllable and selective enrichment. Using the above characteristics, 18 phosphopeptides were detected from α-casein hydrolysate, 8 phosphopeptides were detected from β-casein hydrolysate and 21 glycopeptides were detected from IgG hydrolysate. Finally, the gradual elution strategy was used; 16 phosphopeptides and 19 glycopeptides were detected from the α-casein hydrolysate and IgG hydrolysate. The corresponding glycopeptides and phosphopeptides were identified from the human serum. It proves that the FE-1 COF material has a good enrichment effect on phosphopeptides and glycopeptides.
Full article
(This article belongs to the Section Synthesis of Biomaterials via Advanced Technologies)
►▼
Show Figures
![](https://pub.mdpi-res.com/jfb/jfb-15-00185/article_deploy/html/images/jfb-15-00185-g001-550.jpg?1720076569)
Figure 1
Open AccessArticle
Cytotoxicity, Biocompatibility, and Calcium Deposition Capacity of 45S5 Bioglass Experimental Paste and Bio-C Temp: In Vitro and In Vivo Study Using Wistar Rats
by
Francine Benetti, Pedro Henrique Chaves de Oliveira, Maria Paula Bernal de Andrade, Cristiane Cantiga-Silva, Gustavo Sivieri-Araújo, Eloi Dezan Júnior, João Eduardo Gomes-Filho, Ivana Márcia Alvez Diniz, Alexandre Henrique dos Reis-Prado, Marina Trevelin Souza, Edgar Dutra Zanotto and Luciano Tavares Angelo Cintra
J. Funct. Biomater. 2024, 15(7), 184; https://doi.org/10.3390/jfb15070184 - 4 Jul 2024
Abstract
The evolution of biomaterials engineering allowed for the development of products that improve outcomes in the medical–dental field. Bioglasses have demonstrated the ability to either compose or replace different materials in dentistry. This study evaluated the cytotoxicity, biocompatibility, calcium deposition, and collagen maturation
[...] Read more.
The evolution of biomaterials engineering allowed for the development of products that improve outcomes in the medical–dental field. Bioglasses have demonstrated the ability to either compose or replace different materials in dentistry. This study evaluated the cytotoxicity, biocompatibility, calcium deposition, and collagen maturation of 45S5 bioglass experimental paste and Bio-C Temp, compared to calcium hydroxide (Ca(OH)2) paste. The 45S5 bioglass and Ca(OH)2 powder were mixed with distilled water (ratio 2:1); Bio-C Temp is ready-for-use. Dental pulp cells were exposed to the materials’ extracts (1:2 and 1:4 dilutions; 24, 48, and 72 h) for MTT and live/dead analyses. Polyethylene tubes filled with the pastes, or left empty (control), were implanted on the dorsum of 16 rats. After 7 and 30 days (n = 8/period), the rats were euthanized and the specimens were processed for hematoxylin–eosin (H&E), von Kossa (vK), and picrosirius red (PSR) staining, or without staining for polarized light (PL) birefringence analysis. A statistical analysis was applied (p < 0.05). There was no difference in cell viability among Ca(OH)2, 45S5 bioglass, and the control, across all periods and dilutions (p > 0.05), while Bio-C Temp was cytotoxic in all periods and dilutions compared to the control (p < 0.05). Regarding biocompatibility, there was a reduction in inflammation from 7 to 30 days for all groups, without significant differences among the groups for any period (p > 0.05). The fibrous capsules were thick for all groups at 7 days and thin at 30 days. All materials showed positive structures for vK and PL analysis. At 7 days, the control and 45S5 bioglass showed more immature collagen than the other groups (p < 0.05); at 30 days, 45S5 bioglass had more immature than mature collagen, different from the other groups (p < 0.05). In conclusion, Bio-C Temp presented cytotoxicity compared to the other materials, but the three pastes showed biocompatibility and induced calcium deposition. Additionally, the bioglass paste allowed for marked and continuous collagen proliferation. This study contributed to the development of new biomaterials and highlighted different methodologies for understanding the characteristics of medical–dental materials.
Full article
(This article belongs to the Special Issue Biomaterials in Restorative Dentistry and Endodontics)
►▼
Show Figures
![](https://pub.mdpi-res.com/jfb/jfb-15-00184/article_deploy/html/images/jfb-15-00184-g001-550.jpg?1720057194)
Figure 1
Open AccessArticle
Alginate-Sr/Mg Containing Bioactive Glass Scaffolds: The Characterization of a New 3D Composite for Bone Tissue Engineering
by
Benedetta Guagnini, Barbara Medagli, Bianca Zumbo, Valeria Cannillo, Gianluca Turco, Davide Porrelli and Devis Bellucci
J. Funct. Biomater. 2024, 15(7), 183; https://doi.org/10.3390/jfb15070183 - 2 Jul 2024
Abstract
In bone regeneration, combining natural polymer-based scaffolds with Bioactive Glasses (BGs) is an attractive strategy to improve the mechanical properties of the structure, as well as its bioactivity and regenerative potential. Methods: For this purpose, a well-studied alginate/hydroxyapatite (Alg/HAp) porous scaffold was enhanced
[...] Read more.
In bone regeneration, combining natural polymer-based scaffolds with Bioactive Glasses (BGs) is an attractive strategy to improve the mechanical properties of the structure, as well as its bioactivity and regenerative potential. Methods: For this purpose, a well-studied alginate/hydroxyapatite (Alg/HAp) porous scaffold was enhanced with an experimental bioglass (BGMS10), characterized by a high crystallization temperature and containing therapeutic ions such as strontium and magnesium. This resulted in an improved biological response compared to 45S5 Bioglass®, the “gold” standard among BGs. Porous composite scaffolds were fabricated by freeze-drying technique and characterized by scanning electron microscopy and microanalysis, infrared spectroscopy, and microcomputed tomography. The mechanical properties and cytocompatibility of the new scaffold composition were also evaluated. The addition of bioglass to the Alg/HAp network resulted in a slightly lower porosity. However, despite the change in pore size, the MG-63 cells were able to better adhere and proliferate when cultured for one week on a BG scaffold compared to the control Alg/HAp scaffolds. Thus, our findings indicate that the combination of bioactive glass BGMS10 does not affect the structural and physicochemical properties of the Alg/HAp scaffold and confers bioactive properties to the structures, making the Alg/HAp-BGMS10 scaffold a promising candidate for future application in bone tissue regeneration.
Full article
(This article belongs to the Special Issue Hydroxyapatite Composites for Biomedical Application)
►▼
Show Figures
![](https://pub.mdpi-res.com/jfb/jfb-15-00183/article_deploy/html/images/jfb-15-00183-ag-550.jpg?1719921583)
Graphical abstract
Open AccessCorrection
Correction: Petroll et al. Experimental Models for Investigating Intra-Stromal Migration of Corneal Keratocytes, Fibroblasts and Myofibroblasts. J. Funct. Biomater. 2012, 3, 183–198
by
Walter Matthew Petroll, Neema Lakshman and Lisha Ma
J. Funct. Biomater. 2024, 15(7), 182; https://doi.org/10.3390/jfb15070182 - 2 Jul 2024
Abstract
►▼
Show Figures
In the original publication [...]
Full article
![](https://pub.mdpi-res.com/jfb/jfb-15-00182/article_deploy/html/images/jfb-15-00182-g006-550.jpg?1719902136)
Figure 6
Open AccessArticle
Comparative Analysis of Osteointegration in Hydroxyapatite and Hydroxyapatite-Titanium Implants: An In Vivo Rabbit Model Study
by
Renata Maria Văruț, Luciana Teodora Rotaru, Flavius Nicușor Truicu, Cristina Elena Singer, Iliescu Iulian-Nicolae, Alin Iulian Silviu Popescu, Cristina Popescu, Cristina Teisanu, Gabriela Sima and Oana Elena Nicolaescu
J. Funct. Biomater. 2024, 15(7), 181; https://doi.org/10.3390/jfb15070181 - 29 Jun 2024
Abstract
The study evaluates the osteointegration of hydroxyapatite (HAp) and hydroxyapatite-titanium (HApTi) biocomposites implanted in the femurs of rabbits. The biocomposites were fabricated using powder metallurgy and subjected to a two-step sintering process. Scanning electron microscopy (SEM) was employed to analyze the morphology, while
[...] Read more.
The study evaluates the osteointegration of hydroxyapatite (HAp) and hydroxyapatite-titanium (HApTi) biocomposites implanted in the femurs of rabbits. The biocomposites were fabricated using powder metallurgy and subjected to a two-step sintering process. Scanning electron microscopy (SEM) was employed to analyze the morphology, while mesenchymal stem cells were cultured to assess cytotoxicity and proliferation. In vivo experiments involved the implantation of HAp in the left femur and HApTi in the right femur of twenty New Zealand white rabbits. Computed tomography (CT) scans, histological, immunohistochemical, and histomorphometric analyses were performed to assess bone density and osteoblast activity. Results demonstrated that HApTi implants showed superior osteointegration, with higher peri-implant bone density and increased osteoblast count compared to HAp implants. This study concluded that HApTi biocomposites have potential for enhanced bone healing and stability in orthopedic applications.
Full article
(This article belongs to the Special Issue Functional Composites for Bone Implants and Osseointegration)
Open AccessArticle
Anodic Production and Characterization of Biomimetic Oxide Layers on Grade 4 Titanium for Medical Applications
by
Delfina Nowińska, Patrycja Osak, Joanna Maszybrocka and Bożena Łosiewicz
J. Funct. Biomater. 2024, 15(7), 180; https://doi.org/10.3390/jfb15070180 - 29 Jun 2024
Abstract
Biomaterials are the basis for the development of medicine because they allow safe contact with a living organism. The aim of this work was to produce innovative oxide layers with a microporous structure on the surface of commercially pure titanium Grade 4 (CpTi
[...] Read more.
Biomaterials are the basis for the development of medicine because they allow safe contact with a living organism. The aim of this work was to produce innovative oxide layers with a microporous structure on the surface of commercially pure titanium Grade 4 (CpTi G4) and to characterize their properties as drug carriers. The anodization of the CpTi G4 subjected to mechanical grinding and electrochemical polishing was carried out in a solution of 1M ethylene glycol with the addition of 40 g of ammonium fluoride at a voltage of 20 V for 2, 18, 24, and 48 h at room temperature. It was found that the longer the anodization time, the greater the number of pores formed on the CpTi G4 surface as revealed using the FE-SEM method, and the greater the surface roughness determined in profilometric tests. As the anodizing time increases, the amount of the drug in the form of gentamicin sulfate incorporated into the resulting pores decreases. The most favorable drug release kinetics profile determined via UV–VIS absorption spectroscopy was found for the CpTi G4 anodized for 2 h.
Full article
(This article belongs to the Special Issue Advances in Biomedical Alloys and Surface Modification)
Open AccessArticle
Cytocompatibility of Polymers for Skin-Contact Applications Produced via Pellet Extrusion
by
Sakine Deniz Varsavas, Paweł Michalec, Mohammed Khalifa, Ping Li and Sebastian Spintzyk
J. Funct. Biomater. 2024, 15(7), 179; https://doi.org/10.3390/jfb15070179 - 29 Jun 2024
Abstract
Orthoses and prostheses (O&P) play crucial roles in assisting individuals with limb deformities or amputations. Proper material selection for these devices is imperative to ensure mechanical robustness and biocompatibility. While traditional manufacturing methods have limitations in terms of customization and reproducibility, additive manufacturing,
[...] Read more.
Orthoses and prostheses (O&P) play crucial roles in assisting individuals with limb deformities or amputations. Proper material selection for these devices is imperative to ensure mechanical robustness and biocompatibility. While traditional manufacturing methods have limitations in terms of customization and reproducibility, additive manufacturing, particularly pellet extrusion (PEX), offers promising advancements. In applications involving direct contact with the skin, it is essential for materials to meet safety standards to prevent skin irritation. Hence, this study investigates the biocompatibility of different thermoplastic polymers intended for skin-contact applications manufactured through PEX. Surface morphology analysis revealed distinct characteristics among materials, with TPE-70ShA exhibiting notable irregularities. Cytotoxicity assessments using L929 fibroblasts indicated non-toxic responses for most materials, except for TPE-70ShA, highlighting the importance of material composition in biocompatibility. Our findings underscore the significance of adhering to safety standards in material selection and manufacturing processes for medical devices. While this study provides valuable insights, further research is warranted to investigate the specific effects of individual ingredients and explore additional parameters influencing material biocompatibility. Overall, healthcare practitioners must prioritize patient safety by meticulously selecting materials and adhering to regulatory standards in O&P manufacturing.
Full article
(This article belongs to the Special Issue Functional Biomaterials and Digital Technologies in Dentistry: From Bench to Bedside—Volume II)
►▼
Show Figures
![](https://pub.mdpi-res.com/jfb/jfb-15-00179/article_deploy/html/images/jfb-15-00179-g001-550.jpg?1719916299)
Figure 1
Open AccessSystematic Review
The Incorporation of Zinc into Hydroxyapatite and Its Influence on the Cellular Response to Biomaterials: A Systematic Review
by
Jessica Dornelas, Giselle Dornelas, Alexandre Rossi, Adriano Piattelli, Natalia Di Pietro, Tea Romasco, Carlos Fernando Mourão and Gutemberg Gomes Alves
J. Funct. Biomater. 2024, 15(7), 178; https://doi.org/10.3390/jfb15070178 - 28 Jun 2024
Abstract
Zinc is known for its role in enhancing bone metabolism, cell proliferation, and tissue regeneration. Several studies proposed the incorporation of zinc into hydroxyapatite (HA) to produce biomaterials (ZnHA) that stimulate and accelerate bone healing. This systematic review aimed to understand the physicochemical
[...] Read more.
Zinc is known for its role in enhancing bone metabolism, cell proliferation, and tissue regeneration. Several studies proposed the incorporation of zinc into hydroxyapatite (HA) to produce biomaterials (ZnHA) that stimulate and accelerate bone healing. This systematic review aimed to understand the physicochemical characteristics of zinc-doped HA-based biomaterials and the evidence of their biological effects on osteoblastic cells. A comprehensive literature search was conducted from 2022 to 2024, covering all years of publications, in three databases (Web of Science, PUBMED, Scopus), retrieving 609 entries, with 36 articles included in the analysis according to the selection criteria. The selected studies provided data on the material’s physicochemical properties, the methods of zinc incorporation, and the biological effects of ZnHA on bone cells. The production of ZnHA typically involves the wet chemical synthesis of HA and ZnHA precursors, followed by deposition on substrates using processes such as liquid precursor plasma spraying (LPPS). Characterization techniques confirmed the successful incorporation of zinc into the HA lattice. The findings indicated that zinc incorporation into HA at low concentrations is non-cytotoxic and beneficial for bone cells. ZnHA was found to stimulate cell proliferation, adhesion, and the production of osteogenic factors, thereby promoting in vitro mineralization. However, the optimal zinc concentration for the desired effects varied across studies, making it challenging to establish a standardized concentration. ZnHA materials are biocompatible and enhance osteoblast proliferation and differentiation. However, the mechanisms of zinc release and the ideal concentrations for optimal tissue regeneration require further investigation. Standardizing these parameters is essential for the effective clinical application of ZnHA.
Full article
(This article belongs to the Special Issue Application of Biomaterials and Techniques in Dental Surgical Treatment)
►▼
Show Figures
![](https://pub.mdpi-res.com/jfb/jfb-15-00178/article_deploy/html/images/jfb-15-00178-g001-550.jpg?1720665999)
Figure 1
Open AccessArticle
Mechanical Behavior of Five Different Morse Taper Implants and Abutments with Different Conical Internal Connections and Angles: An In Vitro Experimental Study
by
Claudia Caballero, Fernando Rodriguez, Guillermo Castro Cortellari, Antonio Scarano, Juan Carlos Prados-Frutos, Piedad N. De Aza, Gustavo Vicentis Oliveira Fernandes and Sergio Alexandre Gehrke
J. Funct. Biomater. 2024, 15(7), 177; https://doi.org/10.3390/jfb15070177 - 28 Jun 2024
Abstract
The present study evaluated the mechanical behavior of five designs of Morse taper (MT) connections with and without the application of loads. For this, the detorque of the fixing screw and the traction force required to disconnect the abutment from the implant were
[...] Read more.
The present study evaluated the mechanical behavior of five designs of Morse taper (MT) connections with and without the application of loads. For this, the detorque of the fixing screw and the traction force required to disconnect the abutment from the implant were assessed. A total of 100 sets of implants/abutments (IAs) with MT-type connections were used, comprising five groups (n = 20/group): (1) Group Imp 11.5: IA sets with a cone angulation of 11.5°; (2) Group SIN 11.5: with a cone angulation of 11.5°; (3) Group SIN 16: with a cone angulation of 16°; (4) Group Neo 16: with a cone angulation of 16°; and (5) Group Str 15: with a cone angulation of 15°. All sets received the torque recommended by the manufacturer. After applying the torque, the counter torque of the fixing screws was measured in ten IA sets of each group without the application of cyclic loads (frequencies ≤ 2 Hz, 360,000 cycles, and force at 150 Ncm). The other ten sets of each group were subjected to cyclic loads, after which the detorque was measured. Afterwards, the force for disconnection between the implant and the abutment was measured by traction on all the samples. The untwisting of the abutment fixation screws showed a decrease in relation to the initial torque applied in all groups. In the unloaded samples, it was found to be −25.7% in Group 1, −30.4% in Group 2, −36.8% in Group 3, −29.6% in Group 4, and −25.7% in Group 5. After the applied loads, it was found to be −44% in Group 1, −43.5% in Group 2, −48.5% in Group 3, −47.2% in Group 4, and −49.8% in Group 5. The values for the IA sets were zero for SIN 16 (Group 3) and Neo16 (Group 4), both without and with loads. In the other three groups, without loads, the disconnection value was 56.3 ± 2.21 N (Group 1), 30.7 ± 2.00 N (Group 2), and 26.0 ± 2.52 N (Group 5). After applying loads, the values were 63.5 ± 3.06 N for Group 1, 34.2 ± 2.45 N in Group 2, and 23.1 ± 1.29 N in Group 5. It was concluded that in terms of the mechanical behavior of the five designs of MT IA sets, with and without the application of loads, the Imp 11.5, SIN 11.5, and Srt 15 groups showed better results compared to the SIN 16 and Neo 16 groups, showing that lower values of cone angulation increase the friction between the parts (IA), thus avoiding the need to maintain the torque of the fixing screw to maintain the union of the sets.
Full article
(This article belongs to the Special Issue Advances in Oral and Maxillofacial Implants)
►▼
Show Figures
![](https://pub.mdpi-res.com/jfb/jfb-15-00177/article_deploy/html/images/jfb-15-00177-g001-550.jpg?1719568812)
Figure 1
Open AccessArticle
Formulation Effects on the Mechano-Physical Properties of In Situ-Forming Resilient Hydrogels for Breast Tissue Regeneration
by
Daniella Goder Orbach and Meital Zilberman
J. Funct. Biomater. 2024, 15(7), 176; https://doi.org/10.3390/jfb15070176 - 28 Jun 2024
Abstract
The need for a long-term solution for filling the defects created during partial mastectomies due to breast cancer diagnosis has not been met to date. All available defect-filling methods are non-permanent and necessitate repeat procedures. Here, we report on novel injectable porous hydrogel
[...] Read more.
The need for a long-term solution for filling the defects created during partial mastectomies due to breast cancer diagnosis has not been met to date. All available defect-filling methods are non-permanent and necessitate repeat procedures. Here, we report on novel injectable porous hydrogel structures based on the natural polymers gelatin and alginate, which are designed to serve for breast reconstruction and regeneration following partial mastectomy. The effects of the formulation parameters on the mechanical and physical properties were thoroughly studied. The modulus in compression and tension were in the range of native breast tissue. Both increased with the increase in the crosslinker concentration and the polymer–air ratio. Resilience was very high, above 93% for most studied formulations, allowing the scaffold to be continuously deformed without changing its shape. The combination of high resilience and low elastic modulus is favored for adipose tissue regeneration. The physical properties of gelation time and water uptake are controllable and are affected mainly by the alginate and N-(3-dimethylaminopropyl)-N’-ethylcarbodiimide hydrochloride (EDC) concentrations and less by the polymer–air ratio. In vitro cell viability tests were performed on mouse preadipocytes and indicated high biocompatibility. The minimally invasive nature of this approach, along with the excellent properties of the scaffold, will enable the filling of complex voids while simultaneously decreasing surgical costs and greatly improving patient well-being.
Full article
(This article belongs to the Special Issue Functional Hydrogels for Tissue Engineering and Regenerative Medicine)
►▼
Show Figures
![](https://pub.mdpi-res.com/jfb/jfb-15-00176/article_deploy/html/images/jfb-15-00176-g001-550.jpg?1719568039)
Figure 1
Open AccessReview
Oral and Extra-Oral Manifestations of Hypersensitivity Reactions in Orthodontics: A Comprehensive Review
by
Federica Di Spirito, Alessandra Amato, Maria Pia Di Palo, Rahila Ferraro, Davide Cannatà, Marzio Galdi, Elettra Sacco and Massimo Amato
J. Funct. Biomater. 2024, 15(7), 175; https://doi.org/10.3390/jfb15070175 - 27 Jun 2024
Abstract
Although rare, oral manifestations of hypersensitivity reactions in orthodontic patients pose a significant clinical challenge due to their heterogeneous presentations, and can cause discomfort and pain, possibly impacting patients’ quality of life and orthodontic treatment duration and outcomes. This comprehensive review aimed to
[...] Read more.
Although rare, oral manifestations of hypersensitivity reactions in orthodontic patients pose a significant clinical challenge due to their heterogeneous presentations, and can cause discomfort and pain, possibly impacting patients’ quality of life and orthodontic treatment duration and outcomes. This comprehensive review aimed to elucidate the oral, perioral, and systemic manifestations of hypersensitivity reactions in orthodontic subjects, focusing on patients with fixed appliances, removable appliances, and clear aligners, and detailing their epidemiology, macroscopic and microscopic features, allergy testing, clinical implications, and specific management strategies. Oral and extra-oral manifestations of (immediate and delayed) hypersensitivity reactions occur rarely and are due to the release of metal and non-metal ions from orthodontic appliances. They typically present as erythema, erosive–ulcerative lesions, and gingival hyperplasia, with histopathological findings showing inflammatory infiltrates. Nickel is a significant allergen, and diagnostic tests like patch tests are essential for managing these reactions. Likely due to prolonged contact with oral tissues, fixed orthodontic appliances pose a higher risk compared to removable appliances and clear aligners. Early identification and removal of allergenic materials, combined with effective treatments, can resolve symptoms and prevent recurrence. Keeping dental and medical records updated and knowing family and personal medical histories helps clinicians choose appropriate materials and counsel patients about potential risks. Proper patient education, regular monitoring, and using hypoallergenic materials are key strategies for managing these reactions.
Full article
(This article belongs to the Special Issue Biomaterials in Dentistry 2024)
►▼
Show Figures
![](https://pub.mdpi-res.com/jfb/jfb-15-00175/article_deploy/html/images/jfb-15-00175-g001-550.jpg?1719479629)
Figure 1
Open AccessArticle
Optimizing Filament-Based TCP Scaffold Design for Osteoconduction and Bone Augmentation: Insights from In Vivo Rabbit Models
by
Julien Guerrero, Ekaterina Maevskaia, Chafik Ghayor, Indranil Bhattacharya and Franz E. Weber
J. Funct. Biomater. 2024, 15(7), 174; https://doi.org/10.3390/jfb15070174 - 25 Jun 2024
Abstract
Additive manufacturing has emerged as a transformative tool in biomedical engineering, offering precise control over scaffold design for bone tissue engineering and regenerative medicine. While much attention has been focused on optimizing pore-based scaffold architectures, filament-based microarchitectures remain relatively understudied, despite the fact
[...] Read more.
Additive manufacturing has emerged as a transformative tool in biomedical engineering, offering precise control over scaffold design for bone tissue engineering and regenerative medicine. While much attention has been focused on optimizing pore-based scaffold architectures, filament-based microarchitectures remain relatively understudied, despite the fact that the majority of 3D-printers generate filament-based structures. Here, we investigated the influence of filament characteristics on bone regeneration outcomes using a lithography-based additive manufacturing approach. Three distinct filament-based scaffolds (Fil050, Fil083, and Fil125) identical in macroporosity and transparency, crafted from tri-calcium phosphate (TCP) with varying filament thicknesses and distance, were evaluated in a rabbit model of bone augmentation and non-critical calvarial defect. Additionally, two scaffold types differing in filament directionality (Fil and FilG) were compared to elucidate optimal design parameters. Distance of bone ingrowth and percentage of regenerated area within scaffolds were measured by histomorphometric analysis. Our findings reveal filaments of 0.50 mm as the most effective filament-based scaffold, demonstrating superior bone ingrowth and bony regenerated area compared to larger size filament (i.e., 0.83 mm and 1.25 mm scaffolds). Optimized directionality of filaments can overcome the reduced performance of larger filaments. This study advances our understanding of microarchitecture’s role in bone tissue engineering and holds significant implications for clinical practice, paving the way for the development of highly tailored, patient-specific bone substitutes with enhanced efficacy.
Full article
(This article belongs to the Special Issue Bone Tissue Engineering: Recent Advances and Translation to Clinical Application)
►▼
Show Figures
![](https://pub.mdpi-res.com/jfb/jfb-15-00174/article_deploy/html/images/jfb-15-00174-g001-550.jpg?1720603071)
Figure 1
Open AccessReview
A Historical Perspective on Dental Composite Restorative Materials
by
Jack L. Ferracane
J. Funct. Biomater. 2024, 15(7), 173; https://doi.org/10.3390/jfb15070173 - 25 Jun 2024
Abstract
This review article will discuss the origin of resin-based dental composite materials and their adoption as potentially useful adjuncts to the primary material used by most dentists for direct restorations. The evolution of the materials, largely driven by the industry’s response to the
[...] Read more.
This review article will discuss the origin of resin-based dental composite materials and their adoption as potentially useful adjuncts to the primary material used by most dentists for direct restorations. The evolution of the materials, largely driven by the industry’s response to the needs of dentists, has produced materials that are esthetic, strong, and versatile enough to be used in most areas of the oral cavity to replace or restore missing tooth structures. Significant advancements, such as the transition from chemical to light-curing materials, refinements in reinforcing particles to produce optimum polishing and wear resistance, formulating pastes with altered viscosities to create highly flowable and highly stiff materials, and creating materials with enhanced depth of cure to facilitate placement, will be highlighted. Future advancements will likely reflect the movement away from simply being a biocompatible material to one that is designed to produce some type of beneficial effect upon interaction within the oral environment. These new materials have been called “bioactive” by virtue of their potential effects on bacterial biofilms and their ability to promote mineralization of adjacent tooth structures.
Full article
(This article belongs to the Special Issue State-of-the-Art Dental Adhesives and Restorative Composites)
►▼
Show Figures
![](https://pub.mdpi-res.com/jfb/jfb-15-00173/article_deploy/html/images/jfb-15-00173-g001-550.jpg?1720605169)
Figure 1
Open AccessReview
Advances in Extraction, Structure, and Physiochemical Properties of Sorghum Kafirin for Biomaterial Applications: A Review
by
Umar Shah, Rewati Bhattarai, Hani Al-Salami, Christopher Blanchard and Stuart K. Johnson
J. Funct. Biomater. 2024, 15(7), 172; https://doi.org/10.3390/jfb15070172 - 24 Jun 2024
Abstract
►▼
Show Figures
Kafirin is an endosperm-specific hydrophobic protein found in sorghum grain and the waste by-product from sorghum biorefineries known as sorghum dried distillers’ grain with solubles (DDGS). Because of kafirin’s poor nutritional profile (negative nitrogen balance, slow digestibility, and lack of some essential amino
[...] Read more.
Kafirin is an endosperm-specific hydrophobic protein found in sorghum grain and the waste by-product from sorghum biorefineries known as sorghum dried distillers’ grain with solubles (DDGS). Because of kafirin’s poor nutritional profile (negative nitrogen balance, slow digestibility, and lack of some essential amino acids), its direct human use as a food is restricted. Nevertheless, increased focus on biofuel production from sorghum grain has triggered a new wave of research to use sorghum DDGS kafirin as a food-grade protein for biomaterials with diverse applications. These applications result from kafirin’s unique chemical nature: high hydrophobicity, evaporation-induced self-assembling capacity, elongated conformation, water insolubility, and low digestibility. Aqueous alcohol mixtures have been widely used for the extraction of kafirin. The composition, structure, extraction methodologies, and physiochemical properties of kafirin, emphasising its biomaterial functionality, are discussed in detail in this review. The literature survey reveals an in-depth understanding of extraction methodologies and their impact on structure functionality, which could assist in formulating materials of kafirin at a commercial scale. Ongoing research continues to explore the potential of kafirin and optimise its utilisation as a functional biomaterial, highlighting its valuable structural and physicochemical properties. Further studies should focus on covering gaps in the research as some of the current structural understanding comes from data on zein protein from maize.
Full article
![](https://pub.mdpi-res.com/jfb/jfb-15-00172/article_deploy/html/images/jfb-15-00172-g001-550.jpg?1719910723)
Figure 1
![Journal of Functional Biomaterials jfb-logo](https://cdn.statically.io/img/pub.mdpi-res.com/img/journals/jfb-logo.png?8600e93ff98dbf14)
Journal Menu
► ▼ Journal Menu-
- JFB Home
- Aims & Scope
- Editorial Board
- Reviewer Board
- Topical Advisory Panel
- Instructions for Authors
- Special Issues
- Topics
- Sections & Collections
- Article Processing Charge
- Indexing & Archiving
- Editor’s Choice Articles
- Most Cited & Viewed
- Journal Statistics
- Journal History
- Journal Awards
- Conferences
- Editorial Office
Journal Browser
► ▼ Journal BrowserHighly Accessed Articles
Latest Books
E-Mail Alert
News
Topics
Topic in
Applied Sciences, Dentistry Journal, JCM, JFB, Medicina
Diagnosis and Treatment of Dental Diseases and Tempromandibular Joints
Topic Editors: Rafał Obuchowicz, Małgorzata Pihut, Karolina Nurzynska, Andrzej UrbanikDeadline: 31 August 2024
Topic in
JFB, JMMP, Lubricants, Machines, Materials
Advanced Manufacturing and Surface Technology
Topic Editors: Dingding Xiang, Junying Hao, Xudong Sui, Kaiming WangDeadline: 30 December 2024
Topic in
Coatings, Dentistry Journal, JFB, Materials, Polymers
Surfaces in Healthcare Bridging Medicine and Dentistry with Material Science
Topic Editors: Luminiţa Andronic, Alina VladescuDeadline: 8 January 2025
Topic in
JFB, Materials
Mechanical Study of Biomaterials in Injury and Rehabilitation
Topic Editors: Lizhen Wang, Bo Huo, Wenming Chen, Dohyung LimDeadline: 20 January 2025
![loading...](https://cdn.statically.io/img/pub.mdpi-res.com/img/loading_circle.gif?9a82694213036313?1720765091)
Conferences
Special Issues
Special Issue in
JFB
Feature Papers in Bone Biomaterials
Guest Editors: Feng Chen, Zifei ZhouDeadline: 20 July 2024
Special Issue in
JFB
Scaffolds and Implants for Bone Regeneration
Guest Editors: Kunyu Zhang, Qian Feng, Yongsheng Yu, Boguang YangDeadline: 31 July 2024
Special Issue in
JFB
Photodynamic Therapy of Cancer, Microbes and Viruses
Guest Editor: Zoran M. MarkovićDeadline: 16 August 2024
Special Issue in
JFB
Biodegradable Polymers and Textiles
Guest Editors: Sandra Varnaitė-Žuravliova, Jolanta Sereikaitė, Julija Baltušnikaitė-GuzaitienėDeadline: 20 August 2024
Topical Collections
Topical Collection in
JFB
Biocements for Medical/Dental Purposes
Collection Editor: James Kit-Hon Tsoi
Topical Collection in
JFB
Feature Papers in Antibacterial Biomaterials
Collection Editor: Masakazu Kawashita
Topical Collection in
JFB
Coating Deposition and Surface Functionalization of Implants for Biomedical Applications
Collection Editor: Antonella Sola
Topical Collection in
JFB
Feature Papers in Biomaterials for Healthcare Applications
Collection Editor: Dimitrios Karamichos