Jump to content

South African type XM3 tender

From Wikipedia, the free encyclopedia

South African type XM3 tender
Type XM3 tender on CSAR Class 9
Type and origin
LocomotiveCSAR Class 9
DesignerCentral South African Railways
(P.A. Hyde)
BuilderVulcan Foundry
In service1904
Specifications
Configuration2-axle bogies
Gauge3 ft 6 in (1,067 mm) Cape gauge
Length25 ft 10 in (7,874 mm) approx.
Wheel dia.33+12 in (851 mm) as built
34 in (864 mm) retyred
Wheelbase17 ft 38 in (5,191 mm)
 • Bogie4 ft 7 in (1,397 mm)
Axle load11 LT 17 cwt 2 qtr (12,070 kg) av.
 • Bogie23 LT 15 cwt (24,130 kg) each
Weight empty44,000 lb (20,000 kg)
Weight w/o47 LT 10 cwt (48,260 kg)
Fuel typeCoal
Fuel cap.10 LT (10.2 t)
Water cap.4,000 imp gal (18,200 L)
StokingManual
CouplersDrawbar & Johnston link-and-pin
Career
OperatorsCentral South African Railways
South African Railways
NumbersSAR 727-731

The South African type XM3 tender was a steam locomotive tender from the pre-Union era in the Transvaal.

The Type XM3 tender entered service in 1904, as tenders to the Class 9 4-6-2 Pacific type steam locomotives which were acquired by the Central South African Railways in that year. In 1912, these locomotives retained their Class 9 designation on the South African Railways.[1][2][3]

Manufacturer

[edit]

Type XM3 tenders were built by Vulcan Foundry of Newton-le-Willows in England in 1904.[1]

The Central South African Railways (CSAR) placed five Class 9 Pacific type locomotives in service in 1904. The locomotive and tender were designed in 1903 by P.A. Hyde, who assumed the position of Chief Locomotive Superintendent of the CSAR upon its inception in July 1902.[1][2][3]

The Type XM3 entered service as tenders to these locomotives, which were acquired to work the Durban-bound mail trains from Johannesburg as far as Charlestown on the Transvaal-Natal border.[1][2][3]

Characteristics

[edit]

As built, the tender had a coal capacity of 10 long tons (10.2 tonnes) and a water capacity of 4,000 imperial gallons (18,200 litres), with a maximum average axle load of 11 long tons 17 hundredweight 2 quarters (12,070 kilograms).[1][2][3]

Locomotives

[edit]

In the South African Railways (SAR) years, tenders were numbered for the engines they were delivered with. In most cases, an oval number plate, bearing the engine number and often also the tender type, would be attached to the rear end of the tender. During the classification and renumbering of locomotives onto the SAR roster in 1912, no separate classification and renumbering list was published for tenders, which should have been renumbered according to the locomotive renumbering list.[3][4]

Only Class 9 locomotives were delivered new with Type XM3 tenders. Bearing in mind that tenders could and did migrate between engines, these tenders should have been numbered in the SAR number range from 727 to 731.[1][3][4]

Classification letters

[edit]

Since many tender types are interchangeable between different locomotive classes and types, a tender classification system was adopted by the SAR. The first letter of the tender type indicates the classes of engines to which it could be coupled. The "X_" tenders could be used with the locomotive classes as shown.[3]

The second letter indicates the tender's water capacity. The "_M" tenders had a capacity of 4,000 imperial gallons (18,200 litres; 4,800 US gallons).[3]

A number, when added after the letter code, indicates differences between similar tender types such as function, wheelbase or coal bunker capacity.[3]

References

[edit]
  1. ^ a b c d e f Holland, D.F. (1971). Steam Locomotives of the South African Railways. Vol. 1: 1859–1910 (1st ed.). Newton Abbott, England: David & Charles. pp. 128–129. ISBN 978-0-7153-5382-0.
  2. ^ a b c d South African Railways & Harbours/Suid Afrikaanse Spoorweë en Hawens (15 Aug 1941). Locomotive Diagram Book/Lokomotiefdiagramboek, 3'6" Gauge/Spoorwydte. SAR/SAS Mechanical Department/Werktuigkundige Dept. Drawing Office/Tekenkantoor, Pretoria. p. 43.
  3. ^ a b c d e f g h i South African Railways & Harbours/Suid Afrikaanse Spoorweë en Hawens (15 Aug 1941). Locomotive Diagram Book/Lokomotiefdiagramboek, 2'0" & 3'6" Gauge/Spoorwydte, Steam Locomotives/Stoomlokomotiewe. SAR/SAS Mechanical Department/Werktuigkundige Dept. Drawing Office/Tekenkantoor, Pretoria. pp. 6a-7a, 41, 43.
  4. ^ a b Classification of S.A.R. Engines with Renumbering Lists, issued by the Chief Mechanical Engineer’s Office, Pretoria, January 1912 (Reprinted in April 1987 by SATS Museum, R.3125-6/9/11-1000)