Many cases for the iPad Pro add a lot of unnecessary bulk, a problem the Oxford Leather Case from Pad & Quill solves through the clever use of adhesive. Featuring a simple book-style design that offers full front and back protection, the Oxford Leather iPad Pro Case uses a strong adhesive to hold the iPad Pro firmly in place while leaving it free to be used with the Smart Keyboard.

Design

Opening a Pad & Quill product is fun because Pad & Quill excels at packaging. The Oxford Case came wrapped in a simple bit of thick brown paper, sealed with red wax and the Pad & Quill insignia. It's tasteful packaging and I always enjoy when manufacturers put a little effort into the unwrapping experience.

padandquillpackaging
Pad & Quill's Oxford Case, like many of its products, is carefully crafted by hand from high-quality leather. In this case, it's made from a single piece of full-grain bridle leather and comes in two colors: Whiskey and Chestnut. An expensive, high-quality leather pairs nicely with Apple's larger-screened tablet, and the Oxford's design looks like it will work equally well in business and casual situations.

padandquilllook
Leather like this will change and age over time, giving each Oxford case a unique, broken-in look to add personality, so that's something to keep in mind when considering this option. Inside the case, there's a softer leather to protect the iPad's screen, and there's also an interior pocket to hold papers and the Apple Pencil.

padandquillinside
I wasn't a fan of sticking the Apple Pencil inside the pocket of the Oxford because it adds a noticeable bulge in the case, but I did find it handy for the stray papers I normally keep tucked in my daily planner.

The Oxford is a folio or book-style case, which means it offers full front and back protection for the iPad Pro when it is closed. To keep it closed tight while in a bag or backpack, there's an elastic strap like one might find on a journal.

padandquillinsidewithipad
On the inside of the Oxford case, there are adhesive tabs on one side. The paper covering the tabs will need to be removed and the iPad Pro will need to be stuck to the adhesive, keeping it firmly in place. Due to the adhesive, the Oxford should be treated as something of a permanent case, not one to be removed frequently. If the adhesive does start to become less sticky after the iPad Pro is removed, Pad & Quill does sell extra adhesive.

I held my iPad Pro upside down and shook it vigorously for approximately 10 minutes and the adhesive held strong, but it's still something that has the potential to fail or degrade over time, so that's something that should be kept in mind when using this case. I wouldn't go out of my way to shake my iPad Pro or hold it upside down, even though the adhesive seems to work well.

Smart Keyboard Compatibility

The cover of the Oxford case is designed in a way that lets it work with Apple's Smart Keyboard, and I found this feature to be quite clever. At the back of the Oxford case, there's an area where adhesive is not used, which lets the iPad Pro be lifted away from the cover. From there, the case can be bent to form a stand for the iPad, which, as it turns out, is also pretty handy for watching videos.

padandquilldisplaymode
With the back over positioned as a stand, the iPad Pro's Smart Connector is free to connect to the Smart Keyboard. Connecting the Oxford to the Smart Keyboard is a matter of lining up the Smart Connector on the iPad Pro to the Smart Connector of the Smart Keyboard and then tucking the cover behind the iPad Pro.

padandquillwithsmartkeyboard
It's easy to get the Smart Keyboard connected to the iPad Pro and in the right position, and as I said before, the cover of the Oxford case itself works great as a stand when watching TV or reading in bed or with the iPad Pro on a lap. The only downside is that using the Oxford case in this way does produce a noticeable line on the back -- this didn't bother me, but it is easy to see and ruins some of the clean aesthetic of the case.

padandquillsmartkeyboardfit
Since it works as a stand, the Oxford case can also be paired with standalone Bluetooth keyboards. Having the option to use the Oxford as a stand or pair it with the Smart Keyboard was a pleasant surprise for me, and a feature that I appreciated as the iPad Pro is more of a permanent case that shouldn't be frequently removed.

padandquillbendline

Bottom Line

Given its thin size, attractive exterior, Smart Keyboard compatibility, and ability to provide total protection for the iPad Pro, the Oxford Leather Case from Pad & Quill will definitely appeal to some users who are looking for those features.

The use of adhesive is going to be a turn off for other people, positioning the Oxford Leather Case as a love it or hate it product. Holding the iPad Pro in place via adhesive is a clever way to keep it secure without adding bulk, but adhesive always has a chance of failing and it's going to prevent the iPad Pro from being removed from the case for the most part.

padandquillstanding
For someone who wants permanent all-around protection for the iPad Pro, the Oxford Leather Case is a good option. It's undeniably attractive and it's not going to add too much extra weight to the iPad. Being able to use it with the Smart Keyboard and as a stand is an added bonus.

padandquillfinal
For someone who needs more protection or wants to be able to remove their iPad Pro from its case on a regular basis, the Oxford Leather Case isn't the best choice. It's also worth noting that this isn't a stick it on and forget about it case - you're always going to want to be careful about how you pick it up due to the chance the adhesive could fail, but overall, this is a nice, slim case for the iPad Pro that has a lot going for it.

Pros:

  • Doesn't add a lot of bulk
  • Works with Smart Keyboard
  • Attractive design
  • Made from quality materials
  • Adhesive is strong

Cons:

  • iPad can't be removed often without degrading adhesive
  • There's always a chance adhesive could fail
  • Expensive

How to Buy

The Oxford Leather iPad Pro Case from Pad & Quill can be purchased from the Pad & Quill website for $129.95.

Note: MacRumors received no compensation for this review.

Top Rated Comments

Max(IT) Avatar
111 months ago
Seriously? Adhesive? Seriously?
Score: 1 Votes (Like | Disagree)
mxmgodin Avatar
111 months ago
This looks really, really great, but adhesive tape to hold the iPad? No thank you. I prefer a case from which the device can easily be swapped in and out without struggling and/or degrading the case or even the device itself.
Score: 1 Votes (Like | Disagree)
sza Avatar
111 months ago
"adhesive tabs on one side" ... are you kidding me???
Score: 1 Votes (Like | Disagree)
Bubba Satori Avatar
111 months ago
Look, a hipster.
I wonder if the beard and hat have adhesive tabs?
Score: 1 Votes (Like | Disagree)
jeahsj Avatar
106 months ago
I purchased this case and absolutely love it. The leather is high quality and the construction is excellent. The adhesive tape works perfectly. Not one concern about its strength. I don't like cases where you have to slide in an iPad or click one in and have the case cover portions of the iPad. This case with my iPad Pro is so lean and thin as there is no extra material needed. So thin, it looks like a portfolio rather than an iPad. I have a full view of the iPad, both front and all sides. I am getting many compliments on the case. Glad I found it. And yes....adhesive...seriously! ;-) Works perfectly.
Score: 1 Votes (Like | Disagree)
bronksy Avatar
111 months ago
Chewing gum included.
Genuine hipster chewing gum.
Score: 1 Votes (Like | Disagree)

Popular Stories

iPhone SE 4 Vertical Camera Feature

iPhone SE 4 Rumored to Use Same Rear Chassis as iPhone 16

Friday July 19, 2024 7:16 am PDT by
Apple will adopt the same rear chassis manufacturing process for the iPhone SE 4 that it is using for the upcoming standard iPhone 16, claims a new rumor coming out of China. According to the Weibo-based leaker "Fixed Focus Digital," the backplate manufacturing process for the iPhone SE 4 is "exactly the same" as the standard model in Apple's upcoming iPhone 16 lineup, which is expected to...
iPhone 16 Pro Sizes Feature

iPhone 16 Series Is Just Two Months Away: Everything We Know

Monday July 15, 2024 4:44 am PDT by
Apple typically releases its new iPhone series around mid-September, which means we are about two months out from the launch of the iPhone 16. Like the iPhone 15 series, this year's lineup is expected to stick with four models – iPhone 16, iPhone 16 Plus, iPhone 16 Pro, and iPhone 16 Pro Max – although there are plenty of design differences and new features to take into account. To bring ...
bsod

Crowdstrike Says Global IT Outage Impacting Windows PCs, But Mac and Linux Hosts Not Affected

Friday July 19, 2024 3:12 am PDT by
A widespread system failure is currently affecting numerous Windows devices globally, causing critical boot failures across various industries, including banks, rail networks, airlines, retailers, broadcasters, healthcare, and many more sectors. The issue, manifesting as a Blue Screen of Death (BSOD), is preventing computers from starting up properly and forcing them into continuous recovery...
iphone 14 lineup

Cellebrite Unable to Unlock iPhones on iOS 17.4 or Later, Leak Reveals

Thursday July 18, 2024 4:18 am PDT by
Israel-based mobile forensics company Cellebrite is unable to unlock iPhones running iOS 17.4 or later, according to leaked documents verified by 404 Media. The documents provide a rare glimpse into the capabilities of the company's mobile forensics tools and highlight the ongoing security improvements in Apple's latest devices. The leaked "Cellebrite iOS Support Matrix" obtained by 404 Media...
Apple Watch Series 9

2024 Apple Watch Lineup: Key Changes We're Expecting

Tuesday July 16, 2024 7:59 am PDT by
Apple is seemingly planning a rework of the Apple Watch lineup for 2024, according to a range of reports from over the past year. Here's everything we know so far. Apple is expected to continue to offer three different Apple Watch models in five casing sizes, but the various display sizes will allegedly grow by up to 12% and the casings will get taller. Based on all of the latest rumors,...
tinypod apple watch

TinyPod Turns Your Apple Watch Into an iPod

Wednesday July 17, 2024 3:18 pm PDT by
If you have an old Apple Watch and you're not sure what to do with it, a new product called TinyPod might be the answer. Priced at $79, the TinyPod is a silicone case with a built-in scroll wheel that houses the Apple Watch chassis. When an Apple Watch is placed inside the TinyPod, the click wheel on the case is able to be used to scroll through the Apple Watch interface. The feature works...