IAPMO RESEARCH AND TESTING, INC.

5001 E. Philadelphia Street, Ontario, CA 91761-2816 • (909) 472-4100 • Fax (909) 472-4244 • www.iapmort.org

IAPMO R&T Product Listing
IAPMO Research and Testing, Inc. is a product certification body in which its product certification system includes inspection and testing of samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the requirements of applicable codes and standards. This activity is coupled with periodic surveillance of the supplier's factory and/or warehouses as well as the assessment of the supplier's Quality Assurance System. This listing is subject to the conditions set forth in the characteristics below and is not to be construed as any recommendation, assurance or guarantee by IAPMO Research and Testing, Inc. of the product acceptance by Authorities Having Jurisdiction.
This IAPMO R&T Listing is current as of 7/11/2024

 

Product: Drinking Water Treatment Units PFOA & PFOS 
File No. W-11604
     
Issued To: AQUATRU, LLC
14724 VENTURA BLVD
SUITE 200
SHERMAN OAKS, CA 91401
     
Identification:
Product shall bear:

The certified company name.

The model number or trade designation.

The appropriate certification mark.

Product markings may be permanently fixed on the system or may be included as part of product literature or packaging.
     
Characteristics:
The systems addressed by this standard are designed to be used to reduce PFOA and PFOS that may be present in drinking water (public or private), which are considered health hazards.

Products are to be installed in accordance with the manufacturer's instructions and local codes.

An elective claim per NSF/ANSI 53 (or P473) is PFOA and PFOS. Levels of PFOA and PFOS vary across different regions. When a product has been certified for PFOA/PFOS, the current acceptance level under NSF/ANSI 53 (or P473) is 70 ppt for both PFOA and PFOS.  The combination of PFOS and PFOA cannot exceed the total.

Below are specific levels established by specific AHJs:

US EPA, Alabama, Alaska, California, Colorado, Connecticut, Florida, Idaho Maine, Massachusetts, Michigan and West Virginia: 70 ppt for both PFOA and PFOS. The combination of PFOS and PFOA cannot exceed the total.
Minnesota: 35 ppt for PFOA and 15 ppt for PFOS
Nevada: 667 ppt for both PFOA and PFOS.
New Hampshire: 12 ppt for PFOA and 15 ppt for PFOS.
New Jersey: 14 ppt for PFOA and 13 ppt for PFOS.
Vermont: 20 ppt for both PFOA and PFOS. The combination of PFOS and PFOA cannot exceed the total.
Canada: 200 ppt for PFOA and 600 ppt for PFOS.  


Products listed on this certificate have been tested by an IAPMO R&T recognized laboratory. This recognition has been granted based upon the laboratory's compliance to the applicable requirements of ISO/IEC 17025.
     
Products are certified to the following standard(s):
 
NSF P473-2016
 

 

Product Type

Countertop

Brand Name

Model Number

Replacement Component

Service Cycle (gallons)

Reduction Claims

AQUATRU

AT2000

AT2003

600

PFOA, PFOS

AQUATRU

AT2010

AT2003

600

PFOA, PFOS

AQUATRU

AT2020

AT2003

600

PFOA, PFOS

AQUATRU

AT2030

AT2003

600

PFOA, PFOS

AQUATRU

AT2040

AT2003

600

PFOA, PFOS

AQUATRU

AT2050

AT2003

600

PFOA, PFOS

Product Type

Under the Sink

BRAND NAME

MODEL NUMBER

REPLACEMENT COMPONENT

FLOW RATE
(GPM)

CAPACITY
(GALLONS)

REDUCTION CLAIMS

AQUATRU

ATU100

ATU2003

0.06

360

PFOA, PFOS

 

 

 

This IAPMO R&T Listing is current as of 7/11/2024