Jump to content

Geelong–Ballarat railway line

From Wikipedia, the free encyclopedia

Geelong – Ballarat
Overview
StatusFreight only
Former connectionsLal Lal racecourse branch
Service
TypeRegional
SystemVictorian Railways
Rolling stock153 hp Walker railmotor (until 1978)
History
Commenced10 April 1858
Completed1862
Technical
Number of tracksDouble track (until 1934)
Single track with crossing loops

The Geelong–Ballarat railway line is a broad-gauge railway in western Victoria, Australia between the cities of Geelong and Ballarat.[1] Towns on the route include Bannockburn, Lethbridge, Meredith, Elaine and Lal Lal. Major traffic includes general freight from the Mildura line, and grain.

History

[edit]
Now privately occupied Bannockburn station

After the railway from Melbourne to Geelong was opened in 1857,[2] agitation soon started in Ballarat for a railway link to serve the rapidly growing gold mining area.[3]

The prospectus for the £1,000,000 "Geelong, Ballaarat and North Western Railway Company" (the different spelling "Ballaarat" persisted until the early 1990s) was advertised in January 1854[4] with the Francis Bell as the engineer. Bell surveyed and designed the line, and lithographed plans were made available with the prospectus. Because private railway companies were unable to raise the necessary capital in London, the Victorian colonial government took over the construction of trunk railway lines to Ballarat and Bendigo. Bell's plans were used as the basis for the current railway alignment by the engineer-in-chief of the Victorian Railways, George Darbyshire.

Construction work on the Geelong – Ballarat railway began in 1858 under the supervision of the Victorian Railways engineer Robert Watson, and the official opening occurred on 10 April 1862. The line was built to a high standard, with double track provided throughout, bluestone station buildings at all of the initial stations, a number of bluestone bridges for roads that crossed the line, and the substantial 1,450-foot (440 m) Moorabool Viaduct over the river of the same name.[2] The line remained the only rail route from Ballarat to Melbourne until 1889, when the Melbourne to Ballarat line opened.

The Geelong to Ballarat line connected with the Geelong railway at North Geelong station, and when the 'direct line' from Ballarat to Melbourne was opened, it branched off at Warrenheip station. Single-tracking of the Geelong to Ballarat line commenced in 1892, but the majority remained double-tracked until 1934, when the 53-kilometre section from Bannockburn to Warrenheip was singled.[5] In 1913 the Gheringhap–Maroona line was opened, junctioning with the line at Gheringhap.[6]

In 1978, passenger services on the line were withdrawn when the 153hp Walker railmotor used to operate them fell into disrepair, and a replacement bus service was introduced.[7] Passenger trains from Ballarat and beyond continued to use the Geelong–Ballarat line as an alternate route to Melbourne until the 1990s, but did not stop at any stations along the line.

In 1995, the track between North Geelong and Gheringhap was converted to dual gauge as part of the gauge standardisation of the Melbourne–Adelaide railway.[5] Also at that time, the seven-kilometre section of double track from Ballarat to Warrenheip was converted to two parallel and independent lines, one running to Geelong and one to Melbourne, with the junction at Warrenheip being abolished.[8] In 2008 track upgrading work commenced on the line as part of the rail freight improvements to the Mildura line.[9] Improvements included installing gauge-convertible sleepers, the dual-gauging of level crossings, and drainage and ballast renewal.[9] Upgrade work was completed in 2009.[9]

To commemorate the 150th anniversary of the opening of the Geelong-Ballarat railway, a special train ran from Geelong to Ballarat and return on Tuesday 10 April 2012,[10] and further celebrations were held during the following weekend, on the 14 & 15 April.

As part of its election policy, the state Coalition government, elected in November 2010, instituted a study into reintroducing passenger services on the line.[11] The so-called "Rail Revival Study", obtained by the Herald Sun in mid-2013 using Freedom of Information laws, concluded that returning rail passenger services to the line was not viable due to the high cost.[12] Despite a push in November 2013 to re-open these railway sections for passenger traffic, nothing ended up happening, with the line remaining freight-only.[13]

Line guide

[edit]
Crossing plains near Bannockburn
Bluestone road overbridge near Lethbridge
Meredith station and crossing loop
El Zorro-operated grain train near Meredith
Running through forest near Lal Lal
V/Line VLocity train at the junction with the Melbourne-Ballarat line at Warrenheip station

The line uses centralised traffic control on the 13.5 km dual gauge section between North Geelong and Gheringhap, and Train Order Working from there.[14] Unattended crossing loops exist at Gheringhap and Warrenheip. Meredith can be used to cross trains if the signal box is attended. Lal Lal has a crossing loop that is not used.

Geelong – Ballarat railway
69.950 km
North Geelong Junction
70.900 km
Melbourne-Geelong railway towards Melbourne
71.142 km
North Geelong C
Western standard gauge towards Melbourne
77.483 km
Moorabool
78.820 km
Moorabool Viaduct
Western standard gauge towards Adelaide
83.454 km
Gheringhap
89.702 km
Bannockburn
97.100 km
Lethbridge Block Point
99.262 km
Lethbridge
101 km
RMSP 13
105.390 km
Medina
107.401 km
RMSP 52
110.619 km
RMSP 12
114.198 km
Meredith
117.055 km
RMSP 14
122.959 km
Elaine
134.758 km
Lal Lal
137.440 km
Lal Lal Block Point
140.268 km
Yendon
144.810 km
Navigator
Melbourne-Ballarat railway towards Melbourne
148.800 km
Warrenheip
154.694 km
Ballarat East
155.386 km
Ballarat

Engineering heritage

[edit]

The line received an Engineering Heritage Marker from Engineers Australia as part of its Engineering Heritage Recognition Program.[15]

References

[edit]
  1. ^ "Blue Bridge (Rail), Mount Doran Egerton Rd, Elaine, VIC, Australia (Place ID 3945)". Australian Heritage Database. Australian Government. Retrieved 28 September 2008.
  2. ^ a b "Rail Geelong – Geelong Line Guide". www.railgeelong.com. Retrieved 23 April 2008.
  3. ^ "Ballarat Australia History – Rail Heritage". www.ballarathistory.org. Retrieved 23 April 2008.
  4. ^ "Advertising". The Argus. Melbourne. 25 January 1854. p. 6. Retrieved 3 December 2014 – via National Library of Australia.
  5. ^ a b "Yelta Line". www.vicsig.net. Retrieved 17 August 2015.
  6. ^ "VICSIG – Infrastructure – Inverleigh". www.vicsig.net. Retrieved 23 April 2008.
  7. ^ Waugh, Andrew. "Geelong – Ballarat (1990) (1925K)" (PDF). Victorian Station Histories. www.vrhistory.com. Retrieved 23 April 2008.
  8. ^ Waugh, Andrew. "Warrenheip station" (PDF). Victorian Station Histories. www.vrhistory.com. Retrieved 23 April 2008.
  9. ^ a b c "Mildura Rail Freight Upgrade". Department of Transport website. Department of Transport. 2 April 2011. Archived from the original on 7 November 2009. Retrieved 30 June 2011.
  10. ^ "Geelong - Ballarat Railway 150th". railgallery.wongm.com. Archived from the original on 12 April 2013.
  11. ^ "Rail Revival Study: Geelong – Ballarat – Bendigo investigations underway". Archived from the original on 25 March 2012. Retrieved 10 May 2012.
  12. ^ Harris, Amelia (2 June 2013). "Too costly to get trains back on track between Geelong, Ballarat and Bendigo, study shows". Herald Sun. Retrieved 15 July 2013.
  13. ^ "Residents Revive Push for regional rail link". Australian Broadcasting Corporation. Retrieved 24 May 2022.
  14. ^ "North Geelong to Yelta" (PDF). V/Line ~ Network Access ~ Information Pack. www.vline.com.au. Archived from the original (PDF) on 21 July 2008. Retrieved 23 April 2008.
  15. ^ "Geelong to Ballarat Railway, 1862-". Engineers Australia. Retrieved 27 April 2020.

Further reading

[edit]
[edit]

Media related to Geelong–Ballarat railway line at Wikimedia Commons