Patrick Müsse

At MedtecLIVE, Michael M. Kania discussed the current situation between manufacturers and notified bodies and the excessively long certification processes with Christian Johner from the Johner Institut GmbH, Harald Rentschler from mdc medical device certification GmbH and Andreas Purde from TÜV SÜD. The common consensus among the panelists was clear. The solutions must be digital and no longer rely on documents. Only in this way can processes run without friction and the capacities on both sides be used efficiently. #EUMDR #IVDR #MedicalDevices #MedTech #RegulatoryAffairs #Medizintechnik

15

3 Kommentare

Next week is our last stop at the all about automation for this year! Come and visit us!   ✔ New fieldbus indicators ✔ Innovative IO-Link Converters ✔ Good conversations with our team   🗓️ When: 26. June - 27. June 📍 Where: Stand J-201 - Messe Straubing      #MotronaGmbH #allaboutautomation #Straubing #automation #digitalindicator #speedmonitor #signalconverter #motrona #processindicator #processindicator

10

🚀 Process validation in medical technology: a must for quality and efficiency!   📈 According to the Federal Office for Drugs and Medical Devices, "inadequate manufacturing processes" are a frequent cause of risk reports. Process validation is key to avoiding errors.   👨‍🔬 In an interview, Robert Schreiner from Novoplast Schlauchtechnik explains that standard-compliant processes must not only deliver robust results, but should also be fully documented. Unfortunately, documentation is often sloppy, which leads to deficiencies.   🔍 A validation process usually goes through three steps: 1. IQ – Installation Qualification 2. OQ – Operational Qualification 3. PQ – Performance qualification (PQ) A fourth stage, DQ - Design Qualification, is more common in the pharmaceutical industry.   💡 Read more about their work as a validation service provider in the interview with Robert Schreiner 👉 https://lnkd.in/daYJ3_vW #Medizintechnik #MedtecLIVE #MedicalTechnology 

37

1 Kommentar

🌟 Hear from Our Surgeons 🌟 We’re excited to share surgeon feedback about what makes #Dexter different? 🔹 Dr. Nico Seeger: “What's special about Dexter is that I can just use it a lot more often, for a lot more procedures than usual, because it's so easily accessible and I can actually integrate it into any procedure.” 🔹 Dr. Lukas Gantner: "Every operation benefits from this system. You always have to ask yourself, where is robotic surgery really necessary? And where can we perhaps be faster with laparoscopy or where is laparoscopy perhaps sufficient?” 🔹 Prof. Stefan Breitenstein: "The simplicity and accessibility of the system and the ability to switch seamlessly between laparoscopic and robotic surgery is really impressive." #Surgery #Innovation #RoboticSurgery #Laparoscopy #HealthcareInnovation #Simplicity #Accessiblity #Excellence #Generalsurgery #empowering

105

2 Kommentare

Resect the liver, treat it OUTSIDE of the human body for up to 14 days and transplant into a patient who needs it. Meet the organ perfusion machine that will keep the liver alive. In a nutshell, it is “a simplified human body,” Waldemar Hoffmann, the CEO of Apersys AG explains in the new X-Health.show episode. “So we use the principle of biomimicry and looked into the human body, what is needed to maintain organs alive at the end if you simplify it it's a loop of blood that is constantly pumped through the entire body”. Also, the liver will have  🌡 the temperature maintained,  👉 features of the kidney, 👉 the breathing movement of the lung, 👉 nutrients and energy supply. It’s also an answer to the broadening gap in the demand for liver grafts – 14 000 in the US alone, and the actual number of the grafts available – 9 000. There is additional number of donated livers – 7 000 - that is discarded, not safe for patients for transplantation. Apersys wants to save them, treat them, and, well, save lives. Listen to the details of how the perfusion machine works ➡ link in the comments. #transplantation #medicaldevice #futureofhealthcare #swissstartups #xhealth Wyss Zurich

36

7 Kommentare

This is innovation paired with workflow improvement. Tomorrow (Friday) at 12 pm (CEST) I will present "predictive analytics in neonatal care" at the EWON 2024.

2

Serviceability: SternMed GmbH Modular devices are often designed with ease of serviceability in mind. Individual modules can be serviced or replaced independently, minimizing downtime, and reducing the need for complete device replacements. This feature enhances SternMed GmbH device reliability and reduces the impact of maintenance on patient care. www.sternmed.de marketing@sternmed.de #sternmed #medicalsolutions #medicalsupplies #durablemedicalequipment #medicalequipment #medicaldevices #medicaldevicesales #medicaldevicecompanies #medicalsupplycompany #medicalequipmentsupplier #medicalsupplier #medicalequipmentsupplies #medicaltechnologies #medicalinstruments #topmedicaldevicecompanies #medicaldevicemanufacturing #medicalproducts #medicaldeviceindustry #medicaldevicemanufacturer #medicalmachines #diagnosticdevices #turnkeyproject #modulardevices #hospitalproject #healthcare #medicadevice #germenengineering

14

Angiography Equipment Market – Industry Trends and Forecast to 2029 https://lnkd.in/dzXBzbgh #innovation #management #technology #creativity #entrepreneurship #sustainability #inspiration #insights #outbreak #impact

3

𝐬𝐭𝐞𝐮𝐭𝐞 𝐌𝐞𝐝𝐢𝐭𝐞𝐜 𝐚𝐭 𝐭𝐡𝐞 𝐇𝐌𝐈 2024 HMI 2024 – steute Meditec is taking part 📅. Meet Dr. Marcus Köny, Julia Mönks and Tobias Pabst (ICCAS - Innovation Center Computer Assisted Surgery) at the joint Campus OS booth (➡ hall 15, booth H13), where we will be presenting our collaborative research project KliNet5G. KliNet5G is one of six satellite projects developed within the lead project Campus OS 💡. The main goal of this project is to develop a modular campus network on the basis of an open 5G wireless technology, as well as interoperable network components. It is being financed within the current technology programme 📌of the Bundesministerium für Wirtschaft und Klimaschutz Additional goals are the safe and real-time operation of medical devices using a universal foot switch, and the locating of medical equipment throughout the premises of a hospital. #steute #steutemeditec #researchcooperations #klinet5g

57

THINK BIG - The Vacuclave 550 Expand your autoclave performance and thus your sterilization capabilities in your practice with the Vacuclave 550 from MELAG Medizintechnik The 50 litres solution with a capacity of up to 25 kg or 16 trays proves that growth, sustainability and environmental protection are compatible! 🌍 With its eco-friendly technology, the Vacuclave 550 ensures an energy-efficient, and cost-saving sterilisation of your instruments: ✅ Recovery Uses the heat of the spent steam to generate new steam. ✅ Coolify Combines highly efficient air cooling with smart temperature monitoring. ✅ DRYtelligence The intelligent algorithm optimally adapts the drying process to your load. ✅ Power Safe 2️ becomes 1️ - Vacuclave 550 offers significantly more capacity with a 40% smaller footprint compared to two small autoclaves. So you can sterilize the maximum number of instruments in record time with minimal space. This makes Vacuclave 550 the cleanest solution - for the environment and your budget! You are curious about the world's largest small autoclave and would like to make your statement to greater sustainability? Learn more: 👉🏼 https://hubs.li/Q02tgftb0 Interested in the Vacuclave 550? Contact us today: 👉🏼 https://hubs.li/Q02tgm6G0 #melag #competenceinhygiene #qualitymadeingermany #instrumentdecontamination #infectioncontrol #vacuclave550 #thinkbig

16

You can read one of the reasons for our true clean label philosophy here. #truecleanlabel

11

#MedicalMonday: Our new video will take you on the fascinating journey of how Manfred Sauer began and you can see how our products are made. ❤️ Take a look: https://lnkd.in/dHm7h3de #Urology #ContinenceProducts #Incontinence #Bladder #Bowel #SpinalInjury #Rehabilitation

7

Early results from the BIO|CONDUCT study confirm positive experience with BIOTRONIK CSP tools also in the US. Check the HRS wrap-up video here (min. 2:57): https://ow.ly/Qxf250SsLoH

42

#LMMInnovation Remember to save the date! 18.-20. June 2024 at the MedTechLIVE2024 in Stuttgart, Germany. 3D printing is revolutionizing the medical industry and offers innovative solutions for the production of medical devices. One such solution is 3D-printed endoscopic clamps, which enable fast and cost-effective production and make innovative new variants of clamps with functional integrations feasible. By using sinter-based 3D printing, developers and manufacturers of medical devices can create innovative products. Additive manufacturing also enables more flexible product development, novel end-use parts and the creation of personalized medical devices that would not be possible with conventional manufacturing processes. Our processes at MetShape enable us to efficiently deliver the medium annual quantities typically required in medical technology. Here, the quantities are often between 1,000 and 100,000 units per year. In such cases, conventional production is often not worthwhile as it is associated with high costs. With our flexible manufacturing options, we can produce both small and large quantities economically. A decisive advantage over conventional production methods such as CNC and MiM is that we do not require any tools. This means that we can also offer smaller quantities without high price barriers. By integrating functions, it is possible to combine several conventionally manufactured parts and thus incorporate cameras or sensors into the clamps, which, for example, help to better recognize the tissue or measure pressure, temperature and oxygen saturation. This enables new surgical procedures that can save and improve people's lives. 👉 Be at MedtecLIVE and secure your free trade fair ticket now with one of our exclusive voucher codes: https://lnkd.in/e9b6JsZz Appointments with our Business Developer Kevin Kröning can be made in advance. #MedTech #3Dprinting #endoscopyclamp #innovation

55

3 Kommentare

👉 Neuromonitoring in #Schilddrüsenchirurgie - with Prof. Dr. med. Stefan Schopf What makes #LangerMedical's #Neuromonitoring solutions so special? For more than two decades, our goal has been to provide our customers with only the highest quality #IONM products, which always implement the latest technologies and features, but still feel familiar and simple in terms of #Handling and daily #Workflow. The AVALANCHE® SI 2 #Neuromonitor is the embodiment of our spirit of innovation. With sophisticated #Software and numerous intelligent #Features, it enables precise and reliable #Neuromonitoring, not only for the #Schilddrüse, but for a wide range of surgical disciplines. See for yourself! #AVASI2 #IONM #IOM #Medizintechnik #Innovation #Qualität #Bedienkomfort #DigitaleChirurgie #MadeInGermany

4

Do you know that regular eye examinations are recommended from the age of 40 and that for people with myopia or glaucoma in the family a preventive eye examination is recommended even before? Many people don`t! 👀 According to an analysis of AOK Baden-Württemberg insurance data from 2016, only around 25% of their insurance participants have seen an ophthalmologist 🤯 This is despite the fact that 75% of all visual impairments and blindness could have been prevented by early detection and appropriate measures. In the latest issue of FOCUS magazine, our CMO PD Dr. Catharina Busch, speaks about our low-threshold eye screening option and how exactly the collaboration between our partner opticians and local ophthalmologists works. https://lnkd.in/eTXBJQH5 (german only) #ocumeda #eyecare #news #press #healthcare #preventvisionloss #focus #eye #health

31