-
Hong-Ou-Mandel Interference with a Coexisting Clock using Transceivers for Synchronization over Deployed Fiber
Authors:
Anirudh Ramesh,
Daniel R. Reilly,
Kim Fook Lee,
Paul M. Moraw,
Joaquin Chung,
Md Shariful Islam,
Cristián Peña,
Xu Han,
Rajkumar Kettimuthu,
Prem Kumar,
Gregory Kanter
Abstract:
Interference between independently generated photons is a key step towards distributing entanglement over long distances, but it requires synchronization between the distantly-located photon sources. Synchronizing the clocks of such photon sources using coexisting two-way classical optical communications over the same fiber that transport the quantum photonic signals is a promising approach for ac…
▽ More
Interference between independently generated photons is a key step towards distributing entanglement over long distances, but it requires synchronization between the distantly-located photon sources. Synchronizing the clocks of such photon sources using coexisting two-way classical optical communications over the same fiber that transport the quantum photonic signals is a promising approach for achieving photon-photon interference over long distances, enabling entanglement distribution for quantum networking using the deployed fiber infrastructure. Here, we demonstrate photon-photon interference by observing the Hong-Ou-Mandel dip between two distantly-located sources: a weak coherent state source obtained by attenuating the output of a laser and a heralded single-photon source. We achieve a maximum dip visibility of $0.58 \pm 0.04$ when the two sources are connected via $4.3$ km of deployed fiber. Dip visibilities $>0.5$ are nonclassical and a first step towards achieving teleportation over the deployed fiber infrastructure. In our experiment, the classical optical communication is achieved with $-21$ dBm of optical signal launch power, which is used to synchronize the clocks in the two independent, distantly-located photon sources. The impact of spontaneous Raman scattering from the classical optical signals is mitigated by appropriate choice of the quantum and classical channel wavelengths. All equipment used in our experiment (the photon sources and the synchronization setup) is commercially available. Finally, our experiment represents a scalable approach to enabling practical quantum networking with commercial equipment and coexistence with classical communications in optical fiber.
△ Less
Submitted 1 July, 2024;
originally announced July 2024.
-
Projected background and sensitivity of AMoRE-II
Authors:
A. Agrawal,
V. V. Alenkov,
P. Aryal,
J. Beyer,
B. Bhandari,
R. S. Boiko,
K. Boonin,
O. Buzanov,
C. R. Byeon,
N. Chanthima,
M. K. Cheoun,
J. S. Choe,
Seonho Choi,
S. Choudhury,
J. S. Chung,
F. A. Danevich,
M. Djamal,
D. Drung,
C. Enss,
A. Fleischmann,
A. M. Gangapshev,
L. Gastaldo,
Y. M. Gavrilyuk,
A. M. Gezhaev,
O. Gileva
, et al. (81 additional authors not shown)
Abstract:
AMoRE-II aims to search for neutrinoless double beta decay with an array of 423 Li$_2$$^{100}$MoO$_4$ crystals operating in the cryogenic system as the main phase of the Advanced Molybdenum-based Rare process Experiment (AMoRE). AMoRE has been planned to operate in three phases: AMoRE-pilot, AMoRE-I, and AMoRE-II. AMoRE-II is currently being installed at the Yemi Underground Laboratory, located ap…
▽ More
AMoRE-II aims to search for neutrinoless double beta decay with an array of 423 Li$_2$$^{100}$MoO$_4$ crystals operating in the cryogenic system as the main phase of the Advanced Molybdenum-based Rare process Experiment (AMoRE). AMoRE has been planned to operate in three phases: AMoRE-pilot, AMoRE-I, and AMoRE-II. AMoRE-II is currently being installed at the Yemi Underground Laboratory, located approximately 1000 meters deep in Jeongseon, Korea. The goal of AMoRE-II is to reach up to $T^{0νββ}_{1/2}$ $\sim$ 6 $\times$ 10$^{26}$ years, corresponding to an effective Majorana mass of 15 - 29 meV, covering all the inverted mass hierarchy regions. To achieve this, the background level of the experimental configurations and possible background sources of gamma and beta events should be well understood. We have intensively performed Monte Carlo simulations using the GEANT4 toolkit in all the experimental configurations with potential sources. We report the estimated background level that meets the 10$^{-4}$counts/(keV$\cdot$kg$\cdot$yr) requirement for AMoRE-II in the region of interest (ROI) and show the projected half-life sensitivity based on the simulation study.
△ Less
Submitted 13 June, 2024;
originally announced June 2024.
-
Physical Origin of H-Mode
Authors:
Kwan Chul Lee
Abstract:
The high confinement mode (H-mode), the most important operation mode for the nuclear fusion reactor, has been studied for 42 years, but the transition mechanism has not been unanimously agreed so far. Four decades of H-mode experiments revealed many features of heating power threshold (Pth) for the low to high confinement (L-H) transition, where Pth is proportional to the toroidal magnetic field…
▽ More
The high confinement mode (H-mode), the most important operation mode for the nuclear fusion reactor, has been studied for 42 years, but the transition mechanism has not been unanimously agreed so far. Four decades of H-mode experiments revealed many features of heating power threshold (Pth) for the low to high confinement (L-H) transition, where Pth is proportional to the toroidal magnetic field (B), inversely proportional to the ion mass (mi), and Pth has U-shaped dependence on the plasma density. It is found for the first time that this U-shaped rollover dependence came from Pth is inversely proportional to the multiplication of plasma density (ni) and the squire of neutral density (nn). The reason for the neutral density involved in the L-H transition is that the turbulence suppression takes place by the viscous force of the ion-neutral friction. When the plasma is in the equilibrium by the compensation of turbulence-induced return current to the gyro-center shift current generated by the ion-neutral charge exchanges, the Reynolds number (Re), the ratio of inertial force to the viscous force, can predict the onset of laminar to turbulent flow. Re for the plasma-neutral interaction is proportional to B / (mi nin^2n) which is well agreed with the experimental results of Pth. Re is also proportional to the second gradient of the radial electric field which is agreed with experiments. 15 characteristics of L-H transition are explained by Re including the feature of Pth having favorable dependence on the ion grad B drift toward the x-point.
△ Less
Submitted 5 June, 2024;
originally announced June 2024.
-
Performance of Superconducting Resonators Suspended on SiN Membranes
Authors:
Trevor Chistolini,
Kyunghoon Lee,
Archan Banerjee,
Mohammed Alghadeer,
Christian Jünger,
M. Virginia P. Altoé,
Chengyu Song,
Sudi Chen,
Feng Wang,
David I. Santiago,
Irfan Siddiqi
Abstract:
Correlated errors in superconducting circuits due to nonequilibrium quasiparticles are a notable concern in efforts to achieve fault tolerant quantum computing. The propagation of quasiparticles causing these correlated errors can potentially be mediated by phonons in the substrate. Therefore, methods that decouple devices from the substrate are possible solutions, such as isolating devices atop S…
▽ More
Correlated errors in superconducting circuits due to nonequilibrium quasiparticles are a notable concern in efforts to achieve fault tolerant quantum computing. The propagation of quasiparticles causing these correlated errors can potentially be mediated by phonons in the substrate. Therefore, methods that decouple devices from the substrate are possible solutions, such as isolating devices atop SiN membranes. In this work, we validate the compatibility of SiN membrane technology with high quality superconducting circuits, adding the technique to the community's fabrication toolbox. We do so by fabricating superconducting coplanar waveguide resonators entirely atop a thin ($\sim$110 nm) SiN layer, where the bulk Si originally supporting it has been etched away, achieving a suspended membrane where the shortest length to its thickness yields an aspect ratio of approximately $7.4 \times 10^3$. We compare these membrane resonators to on-substrate resonators on the same chip, finding similar internal quality factors $\sim$$10^5$ at single photon levels. Furthermore, we confirm that these membranes do not adversely affect the resonator thermalization rate. With these important benchmarks validated, this technique can be extended to qubits.
△ Less
Submitted 2 May, 2024;
originally announced May 2024.
-
LIGO operates with quantum noise below the Standard Quantum Limit
Authors:
Wenxuan Jia,
Victoria Xu,
Kevin Kuns,
Masayuki Nakano,
Lisa Barsotti,
Matthew Evans,
Nergis Mavalvala,
Rich Abbott,
Ibrahim Abouelfettouh,
Rana Adhikari,
Alena Ananyeva,
Stephen Appert,
Koji Arai,
Naoki Aritomi,
Stuart Aston,
Matthew Ball,
Stefan Ballmer,
David Barker,
Beverly Berger,
Joseph Betzwieser,
Dripta Bhattacharjee,
Garilynn Billingsley,
Nina Bode,
Edgard Bonilla,
Vladimir Bossilkov
, et al. (146 additional authors not shown)
Abstract:
Precision measurements of space and time, like those made by the detectors of the Laser Interferometer Gravitational-wave Observatory (LIGO), are often confronted with fundamental limitations imposed by quantum mechanics. The Heisenberg uncertainty principle dictates that the position and momentum of an object cannot both be precisely measured, giving rise to an apparent limitation called the Stan…
▽ More
Precision measurements of space and time, like those made by the detectors of the Laser Interferometer Gravitational-wave Observatory (LIGO), are often confronted with fundamental limitations imposed by quantum mechanics. The Heisenberg uncertainty principle dictates that the position and momentum of an object cannot both be precisely measured, giving rise to an apparent limitation called the Standard Quantum Limit (SQL). Reducing quantum noise below the SQL in gravitational-wave detectors, where photons are used to continuously measure the positions of freely falling mirrors, has been an active area of research for decades. Here we show how the LIGO A+ upgrade reduced the detectors' quantum noise below the SQL by up to 3 dB while achieving a broadband sensitivity improvement, more than two decades after this possibility was first presented.
△ Less
Submitted 22 April, 2024;
originally announced April 2024.
-
Spontaneous emission decay and excitation in photonic temporal crystals
Authors:
Jagang Park,
Kyungmin Lee,
Ruo-Yang Zhang,
Hee-Chul Park,
Jung-Wan Ryu,
Gil Young Cho,
Min Yeul Lee,
Zhaoqing Zhang,
Namkyoo Park,
Wonju Jeon,
Jonghwa Shin,
C. T. Chan,
Bumki Min
Abstract:
Over the last few decades, the prominent strategies for controlling spontaneous emission has been the use of resonant or space-periodic photonic structures. This approach, initially articulated by Purcell and later expanded upon by Yablonovitch in the context of photonic crystals, leverages the spatial surroundings to modify the spontaneous emission decay rate of atoms or quantum emitters. However…
▽ More
Over the last few decades, the prominent strategies for controlling spontaneous emission has been the use of resonant or space-periodic photonic structures. This approach, initially articulated by Purcell and later expanded upon by Yablonovitch in the context of photonic crystals, leverages the spatial surroundings to modify the spontaneous emission decay rate of atoms or quantum emitters. However, the rise of time-varying photonics has compelled a reevaluation of the spontaneous emission process within dynamically changing environments, especially concerning photonic temporal crystals where optical properties undergo time-periodic modulation. Here, we apply classical light-matter interaction theory along with Floquet analysis to reveal a substantial enhancement in the spontaneous emission decay rate at the momentum gap frequency in photonic temporal crystals. This enhancement is attributed to time-periodicity-induced loss and gain mechanisms, as well as the non-orthogonality of Floquet eigenstates that are inherent to photonic temporal crystals. Intriguingly, our findings also suggest that photonic temporal crystals enable the spontaneous excitation of an atom from its ground state to an excited state, accompanied by the concurrent emission of a photon.
△ Less
Submitted 20 April, 2024;
originally announced April 2024.
-
Infrared resonance-lattice device technology
Authors:
Robert Magnusson,
Yeong H. Ko,
Kyu J. Lee,
Fairooz A. Simlan,
Pawarat Bootpakdeetam,
Renjie Chen,
Debra Wawro Weidanz,
Susanne Gimlin,
Soroush Ghaffari
Abstract:
We present subwavelength resonant lattices fashioned as nano- and microstructured films as a basis for a host of device concepts. Whereas the canonical physical properties are fully embodied in a one-dimensional periodic lattice, the final device constructs are often patterned in two-dimensionally-modulated films in which case we may refer to them as photonic crystal slabs, metamaterials, or metas…
▽ More
We present subwavelength resonant lattices fashioned as nano- and microstructured films as a basis for a host of device concepts. Whereas the canonical physical properties are fully embodied in a one-dimensional periodic lattice, the final device constructs are often patterned in two-dimensionally-modulated films in which case we may refer to them as photonic crystal slabs, metamaterials, or metasurfaces. These surfaces can support lateral modes and localized field signatures with propagative and evanescent diffraction channels critically controlling the response. The governing principle of guided-mode, or lattice, resonance enables diverse spectral expressions such that a single-layer component can behave as a sensor, reflector, filter, or polarizer. This structural sparsity contrasts strongly with the venerable field of multi-layer thin-film optics that is basis for most optical components on the market today. The lattice resonance effect can be exploited in all major spectral regions with appropriate low-loss materials and fabrication resources. In this paper, we highlight resonant device technology and present our work on design, fabrication, and characterization of optical elements operating in the near-IR, mid-IR, and long-wave IR spectral regions. Examples of fabricated and tested devices include biological sensors, high-contrast-ratio polarizers, narrow-band notch filters, and wideband high reflectors.
△ Less
Submitted 19 April, 2024;
originally announced April 2024.
-
Novel Method to Estimate Kinetic Microparameters from Dynamic Whole-Body Imaging in Regular-Axial Field-of-View PET Scanners
Authors:
Kyung-Nam Lee,
Arman Rahmim,
Carlos Uribe
Abstract:
For whole-body (WB) kinetic modeling based on a typical PET scanner, a multi-pass multi-bed scanning protocol is necessary given the limited axial field-of-view. Such a protocol introduces loss of early-dynamics in time-activity curves (TACs) and sparsity in TAC measurements, inducing uncertainty in parameter estimation when using least-squares estimation (LSE) (i.e., common standard) especially f…
▽ More
For whole-body (WB) kinetic modeling based on a typical PET scanner, a multi-pass multi-bed scanning protocol is necessary given the limited axial field-of-view. Such a protocol introduces loss of early-dynamics in time-activity curves (TACs) and sparsity in TAC measurements, inducing uncertainty in parameter estimation when using least-squares estimation (LSE) (i.e., common standard) especially for kinetic microparameters. We present a method to reliably estimate microparameters, enabling accurate parametric imaging, on regular-axial field-of-view PET scanners. Our method, denoted parameter combination-driven estimation (PCDE), relies on generation of reference truth TAC database, and subsequently selecting, the best parameter combination as the one arriving at TAC with highest total similarity score (TSS), focusing on general image quality, overall visibility, and tumor detectability metrics. Our technique has two distinctive characteristics: 1) improved probability of having one-on-one mapping between early and late dynamics in TACs (the former missing from typical protocols), and 2) use of multiple aspects of TACs in selection of best fits. To evaluate our method against conventional LSE, we plotted tradeoff curves for noise and bias. In addition, the overall SNR and spatial noise were calculated and compared. Furthermore, CNR and TBR were also calculated. We also tested our proposed method on patient data (18F-DCFPyL PET scans) to further verify clinical applicability. Significantly improved general image quality performance was verified in microparametric images (e.g. noise-bias performance). The overall visibility and tumor detectability were also improved. Finally, for our patient studies, improved overall visibility and tumor detectability were demonstrated in micoparametric images, compared to use of conventional parameter estimation.
△ Less
Submitted 13 May, 2024; v1 submitted 15 April, 2024;
originally announced April 2024.
-
Second gadolinium loading to Super-Kamiokande
Authors:
K. Abe,
C. Bronner,
Y. Hayato,
K. Hiraide,
K. Hosokawa,
K. Ieki,
M. Ikeda,
J. Kameda,
Y. Kanemura,
R. Kaneshima,
Y. Kashiwagi,
Y. Kataoka,
S. Miki,
S. Mine,
M. Miura,
S. Moriyama,
Y. Nakano,
M. Nakahata,
S. Nakayama,
Y. Noguchi,
K. Sato,
H. Sekiya,
H. Shiba,
K. Shimizu,
M. Shiozawa
, et al. (225 additional authors not shown)
Abstract:
The first loading of gadolinium (Gd) into Super-Kamiokande in 2020 was successful, and the neutron capture efficiency on Gd reached 50\%. To further increase the Gd neutron capture efficiency to 75\%, 26.1 tons of $\rm Gd_2(\rm SO_4)_3\cdot \rm 8H_2O$ was additionally loaded into Super-Kamiokande (SK) from May 31 to July 4, 2022. As the amount of loaded $\rm Gd_2(\rm SO_4)_3\cdot \rm 8H_2O$ was do…
▽ More
The first loading of gadolinium (Gd) into Super-Kamiokande in 2020 was successful, and the neutron capture efficiency on Gd reached 50\%. To further increase the Gd neutron capture efficiency to 75\%, 26.1 tons of $\rm Gd_2(\rm SO_4)_3\cdot \rm 8H_2O$ was additionally loaded into Super-Kamiokande (SK) from May 31 to July 4, 2022. As the amount of loaded $\rm Gd_2(\rm SO_4)_3\cdot \rm 8H_2O$ was doubled compared to the first loading, the capacity of the powder dissolving system was doubled. We also developed new batches of gadolinium sulfate with even further reduced radioactive impurities. In addition, a more efficient screening method was devised and implemented to evaluate these new batches of $\rm Gd_2(\rm SO_4)_3\cdot \rm 8H_2O$. Following the second loading, the Gd concentration in SK was measured to be $333.5\pm2.5$ ppm via an Atomic Absorption Spectrometer (AAS). From the mean neutron capture time constant of neutrons from an Am/Be calibration source, the Gd concentration was independently measured to be 332.7 $\pm$ 6.8(sys.) $\pm$ 1.1(stat.) ppm, consistent with the AAS result. Furthermore, during the loading the Gd concentration was monitored continually using the capture time constant of each spallation neutron produced by cosmic-ray muons,and the final neutron capture efficiency was shown to become 1.5 times higher than that of the first loaded phase, as expected.
△ Less
Submitted 18 June, 2024; v1 submitted 12 March, 2024;
originally announced March 2024.
-
Beneath the Surface: Revealing Deep-Tissue Blood Flow in Human Subjects with Massively Parallelized Diffuse Correlation Spectroscopy
Authors:
Lucas Kreiss,
Melissa Wu,
Michael Wayne,
Shiqi Xu,
Paul McKee,
Derrick Dwamena,
Kanghyun Kim,
Kyung Chul Lee,
Wenhui Liu,
Aarin Ulku,
Mark Harfouche,
Xi Yang,
Clare Cook,
Amey Chaware,
Seung Ah Lee,
Erin Buckley,
Claudio Bruschini,
Edoardo Charbon,
Scott Huettel,
Roarke Horstmeyer
Abstract:
Diffuse Correlation Spectroscopy (DCS) allows the label-free investigation of microvascular dynamics deep within living tissue. However, common implementations of DCS are currently limited to measurement depths of $\sim 1-1.5cm$, which can limit the accuracy of cerebral hemodynamics measurement. Here we present massively parallelized DCS (pDCS) using novel single photon avalanche detector (SPAD) a…
▽ More
Diffuse Correlation Spectroscopy (DCS) allows the label-free investigation of microvascular dynamics deep within living tissue. However, common implementations of DCS are currently limited to measurement depths of $\sim 1-1.5cm$, which can limit the accuracy of cerebral hemodynamics measurement. Here we present massively parallelized DCS (pDCS) using novel single photon avalanche detector (SPAD) arrays with up to 500x500 individual channels. The new SPAD array technology can boost the signal-to-noise ratio by a factor of up to 500 compared to single-pixel DCS, or by more than 15-fold compared to the most recent state-of-the-art pDCS demonstrations. Our results demonstrate the first in vivo use of this massively parallelized DCS system to measure cerebral blood flow changes at $\sim 2cm$ depth in human adults. We compared different modes of operation and applied a dual detection strategy, where a secondary SPAD array is used to simultaneously assess the superficial blood flow as a built-in reference measurement. While the blood flow in the superficial scalp tissue showed no significant change during cognitive activation, the deep pDCS measurement showed a statistically significant increase in the derived blood flow index of 8-12% when compared to the control rest state.
△ Less
Submitted 25 June, 2024; v1 submitted 6 March, 2024;
originally announced March 2024.
-
In-beam performance of a Resistive Plate Chamber operated with eco-friendly gas mixtures
Authors:
L. Quaglia,
M. Abbrescia,
G. Aielli,
R. Aly,
M. C. Arena,
M. Barroso,
L. Benussi,
S. Bianco,
D. Boscherini,
F. Bordon,
A. Bruni,
S. Buontempo,
M. Busato,
P. Camarri,
R. Cardarelli,
L. Congedo,
D. De Jesus Damiao,
M. De Serio,
A. Di Ciaccio,
L. Di Stante,
P. Dupieux,
J. Eysermans,
A. Ferretti,
G. Galati,
M. Gagliardi
, et al. (32 additional authors not shown)
Abstract:
ALICE (A Large Ion Collider Experiment) studies the Quark-Gluon Plasma (QGP): a deconfined state of matter obtained in ultra-relativistic heavy-ion collisions. One of the probes for QGP study are quarkonia and open heavy flavour, of which ALICE exploits the muonic decay. A set of Resistive Plate Chambers (RPCs), placed in the forward rapidity region of the ALICE detector, is used for muon identifi…
▽ More
ALICE (A Large Ion Collider Experiment) studies the Quark-Gluon Plasma (QGP): a deconfined state of matter obtained in ultra-relativistic heavy-ion collisions. One of the probes for QGP study are quarkonia and open heavy flavour, of which ALICE exploits the muonic decay. A set of Resistive Plate Chambers (RPCs), placed in the forward rapidity region of the ALICE detector, is used for muon identification purposes. The correct operation of these detectors is ensured by the choice of the proper gas mixture. Currently they are operated with a mixture of C$_{2}$H$_{2}$F$_{4}$, i-C$_{4}$H$_{10}$ and SF$_{6}$ but, starting from 2017, new EU regulations have enforced a progressive phase-out of C$_{2}$H$_{2}$F$_{4}$ because of its large Global Warming Potential (GWP), making it difficult and costly to purchase. CERN asked LHC experiments to reduce greenhouse gases emissions, to which RPC operation contributes significantly. A possible candidate for C$_{2}$H$_{2}$F$_{4}$ replacement is the C$_{3}$H$_{2}$F$_{4}$ (diluted with other gases, such as CO$_{2}$), which has been extensively tested using cosmic rays. Promising gas mixtures have been devised; the next crucial steps are the detailed in-beam characterization of such mixtures as well as the study of their performance under increasing irradiation levels. This contribution will describe the methodology and results of beam tests carried out at the CERN GIF++ (equipped with a high activity $^{137}$Cs source and muon beam) with an ALICE-like RPC prototype, operated with several mixtures with varying proportions of CO$_{2}$, C$_{3}$H$_{2}$F$_{4}$, i-C$_{4}$H$_{10}$ and SF$_{6}$ . Absorbed currents, efficiencies, prompt charges, cluster sizes, time resolutions and rate capabilities will be presented, both from digitized (for detailed shape and charge analysis) and discriminated (using the same front-end electronics as employed in ALICE) signals.
△ Less
Submitted 29 February, 2024;
originally announced February 2024.
-
Exploring Eco-Friendly Gas Mixtures for Resistive Plate Chambers: A Comprehensive Study on Performance and Aging
Authors:
The RPC ECOGas@GIF++ collaboration,
:,
L. Quaglia,
M. Abbrescia,
G. Aielli,
R. Aly,
M. C. Arena,
M. Barroso,
L. Benussi,
S. Bianco,
D. Boscherini,
F. Bordon,
A. Bruni,
S. Buontempo,
M. Busato,
P. Camarri,
R. Cardarelli,
L. Congedo,
D. De Jesus Damiao,
M. De Serio,
A. Di Ciaccio,
L. Di Stante,
P. Dupieux,
J. Eysermans,
A. Ferretti
, et al. (35 additional authors not shown)
Abstract:
Resistive Plate Chambers (RPCs) are gaseous detectors widely used in high energy physics experiments, operating with a gas mixture primarily containing Tetrafluoroethane (C$_{2}$H$_{2}$F$_{4}$), commonly known as R-134a, which has a global warming potential (GWP) of 1430. To comply with European regulations and explore environmentally friendly alternatives, the RPC EcoGas@GIF++ collaboration, invo…
▽ More
Resistive Plate Chambers (RPCs) are gaseous detectors widely used in high energy physics experiments, operating with a gas mixture primarily containing Tetrafluoroethane (C$_{2}$H$_{2}$F$_{4}$), commonly known as R-134a, which has a global warming potential (GWP) of 1430. To comply with European regulations and explore environmentally friendly alternatives, the RPC EcoGas@GIF++ collaboration, involving ALICE, ATLAS, CMS, LHCb/SHiP, and EP-DT communities, has undertaken intensive R\&D efforts to explore new gas mixtures for RPC technology.
A leading alternative under investigation is HFO1234ze, boasting a low GWP of 6 and demonstrating reasonable performance compared to R-134a. Over the past few years, RPC detectors with slightly different characteristics and electronics have been studied using HFO and CO$_{2}$-based gas mixtures at the CERN Gamma Irradiation Facility. An aging test campaign was launched in August 2022, and during the latest test beam in July 2023, all detector systems underwent evaluation. This contribution will report the results of the aging studies and the performance evaluations of the detectors with and without irradiation.
△ Less
Submitted 29 February, 2024;
originally announced February 2024.
-
Hyperphosphorylation-Induced Phase Transition in Vesicle Delivery Dynamics of Motor Proteins in Neuronal Cells
Authors:
Eunsang Lee,
Donghee Kim,
Yo Han Song,
Kyujin Shin,
Sanggeun Song,
Minho Lee,
Yeongchang Goh,
Mi Hee Lim,
Ji-Hyun Kim,
Jaeyoung Sung,
Kang Taek Lee
Abstract:
Synaptic vesicle transport by motor proteins along microtubules is a crucial active process underlying neuronal communication. It is known that microtubules are destabilized by tau-hyperphosphorylation, which causes tau proteins to detach from microtubules and form neurofibril tangles. However, how tau-phosphorylation affects transport dynamics of motor proteins on the microtubule remains unknown.…
▽ More
Synaptic vesicle transport by motor proteins along microtubules is a crucial active process underlying neuronal communication. It is known that microtubules are destabilized by tau-hyperphosphorylation, which causes tau proteins to detach from microtubules and form neurofibril tangles. However, how tau-phosphorylation affects transport dynamics of motor proteins on the microtubule remains unknown. Here, we discover that long-distance unidirectional motion of vesicle-motor protein multiplexes (VMPMs) in living cells is suppressed under tau-hyperphosphorylation, with the consequent loss of fast vesicle-transport along the microtubule. The VMPMs in hyperphosphorylated cells exhibit seemingly bidirectional random motion, with dynamic properties far different from VMPM motion in normal cells. We establish a parsimonious physicochemical model of VMPM's active motion that provides a unified, quantitative explanation and predictions for our experimental results. Our analysis reveals that, under hyperphosphorylation conditions, motor-protein-multiplexes have both static and dynamic motility fluctuations. The loss of the fast vesicle-transport along the microtubule can be a mechanism of neurodegenerative disorders associated with tau-hyperphosphorylation.
△ Less
Submitted 23 April, 2024; v1 submitted 27 January, 2024;
originally announced January 2024.
-
Towards predicting shear-banding instabilities in lipid monolayers
Authors:
A. R. Carotenuto,
A. Gaffney,
K. Y. C. Lee,
L. Pocivavsek,
M. Fraldi,
L. Deseri
Abstract:
Langmuir monolayers are advantageous systems used to investigate how lipid membranes get involved in the physiology of many living structures, such as collapse phenomena in alveolar structures. Much work focuses on characterizing the pressure-bearing capacity of Langmuir films, expressed in the form of isotherm curves. These show that monolayers experience different phases during compression with…
▽ More
Langmuir monolayers are advantageous systems used to investigate how lipid membranes get involved in the physiology of many living structures, such as collapse phenomena in alveolar structures. Much work focuses on characterizing the pressure-bearing capacity of Langmuir films, expressed in the form of isotherm curves. These show that monolayers experience different phases during compression with an according evolution of their mechanical response, incurring into instability events when a critical stress threshold is overcome. Although well-known state equations, which establish an inverse relationship between surface pressure and area change, are able to describe monolayer behavior during liquid expanded phase, the modelling of their nonlinear behavior in the subsequent condensed region is still an open issue. In this regard, efforts are addressed to explain out-of-plane collapse by modeling buckling and wrinkling mainly resorting to linearly elastic plate theory. However, some experiments on Langmuir monolayers also show in-plane instability phenomena leading to the formation of the so-called shear bands and, to date, no theoretical description of the onset of shear banding bifurcation in monolayers has been yet provided. For this reason, by adopting a macroscopic description, we here study material stability of the monolayers and exploit an incremental approach to find the conditions that kindle shear bands. By starting from the widely assumed hypothesis that monolayers behave elastically in the solid-like region, a hyperfoam hyperelastic potential is introduced as a new constitutive strategy to trace back the nonlinear response of monolayer response during densification. In this way, the obtained mechanical properties together with the adopted strain energy are successfully employed to reproduce the onset of shear banding exhibited by some lipid systems under different conditions.
△ Less
Submitted 19 January, 2024;
originally announced January 2024.
-
Nonproportionality of NaI(Tl) Scintillation Detector for Dark Matter Search Experiments
Authors:
S. M. Lee,
G. Adhikari,
N. Carlin,
J. Y. Cho,
J. J. Choi,
S. Choi,
A. C. Ezeribe,
L. E. Fran. a,
C. Ha,
I. S. Hahn,
S. J. Hollick,
E. J. Jeon,
H. W. Joo,
W. G. Kang,
M. Kauer,
B. H. Kim,
H. J. Kim,
J. Kim,
K. W. Kim,
S. H. Kim,
S. K. Kim,
S. W. Kim,
W. K. Kim,
Y. D. Kim,
Y. H. Kim
, et al. (37 additional authors not shown)
Abstract:
We present a comprehensive study of the nonproportionality of NaI(Tl) scintillation detectors within the context of dark matter search experiments. Our investigation, which integrates COSINE-100 data with supplementary $γ$ spectroscopy, measures light yields across diverse energy levels from full-energy $γ$ peaks produced by the decays of various isotopes. These $γ$ peaks of interest were produced…
▽ More
We present a comprehensive study of the nonproportionality of NaI(Tl) scintillation detectors within the context of dark matter search experiments. Our investigation, which integrates COSINE-100 data with supplementary $γ$ spectroscopy, measures light yields across diverse energy levels from full-energy $γ$ peaks produced by the decays of various isotopes. These $γ$ peaks of interest were produced by decays supported by both long and short-lived isotopes. Analyzing peaks from decays supported only by short-lived isotopes presented a unique challenge due to their limited statistics and overlapping energies, which was overcome by long-term data collection and a time-dependent analysis. A key achievement is the direct measurement of the 0.87 keV light yield, resulting from the cascade following electron capture decay of $^{22}$Na from internal contamination. This measurement, previously accessible only indirectly, deepens our understanding of NaI(Tl) scintillator behavior in the region of interest for dark matter searches. This study holds substantial implications for background modeling and the interpretation of dark matter signals in NaI(Tl) experiments.
△ Less
Submitted 10 May, 2024; v1 submitted 14 January, 2024;
originally announced January 2024.
-
$ρ$-Diffusion: A diffusion-based density estimation framework for computational physics
Authors:
Maxwell X. Cai,
Kin Long Kelvin Lee
Abstract:
In physics, density $ρ(\cdot)$ is a fundamentally important scalar function to model, since it describes a scalar field or a probability density function that governs a physical process. Modeling $ρ(\cdot)$ typically scales poorly with parameter space, however, and quickly becomes prohibitively difficult and computationally expensive. One promising avenue to bypass this is to leverage the capabili…
▽ More
In physics, density $ρ(\cdot)$ is a fundamentally important scalar function to model, since it describes a scalar field or a probability density function that governs a physical process. Modeling $ρ(\cdot)$ typically scales poorly with parameter space, however, and quickly becomes prohibitively difficult and computationally expensive. One promising avenue to bypass this is to leverage the capabilities of denoising diffusion models often used in high-fidelity image generation to parameterize $ρ(\cdot)$ from existing scientific data, from which new samples can be trivially sampled from. In this paper, we propose $ρ$-Diffusion, an implementation of denoising diffusion probabilistic models for multidimensional density estimation in physics, which is currently in active development and, from our results, performs well on physically motivated 2D and 3D density functions. Moreover, we propose a novel hashing technique that allows $ρ$-Diffusion to be conditioned by arbitrary amounts of physical parameters of interest.
△ Less
Submitted 13 December, 2023;
originally announced December 2023.
-
Preliminary results on the long term operation of RPCs with eco-friendly gas mixtures under irradiation at the CERN Gamma Irradiation Facility
Authors:
L. Quaglia,
D. Ramos,
M. Abbrescia,
G. Aielli,
R. Aly,
M. C. Arena,
M. Barroso,
L. Benussi,
S. Bianco,
D. Boscherini,
F. Bordon,
A. Bruni,
S. Buontempo,
M. Busato,
P. Camarri,
R. Cardarelli,
L. Congedo,
D. De Jesus Damiao,
M. De Serio,
A. Di Ciacco,
L. Di Stante,
P. Dupieux,
J. Eysermans,
A. Ferretti,
G. Galati
, et al. (33 additional authors not shown)
Abstract:
Since 2019 a collaboration between researchers from various institutes and experiments (i.e. ATLAS, CMS, ALICE, LHCb/SHiP and the CERN EP-DT group), has been operating several RPCs with diverse electronics, gas gap thicknesses and detector layouts at the CERN Gamma Irradiation Facility (GIF++). The studies aim at assessing the performance of RPCs when filled with new eco-friendly gas mixtures in a…
▽ More
Since 2019 a collaboration between researchers from various institutes and experiments (i.e. ATLAS, CMS, ALICE, LHCb/SHiP and the CERN EP-DT group), has been operating several RPCs with diverse electronics, gas gap thicknesses and detector layouts at the CERN Gamma Irradiation Facility (GIF++). The studies aim at assessing the performance of RPCs when filled with new eco-friendly gas mixtures in avalanche mode and in view of evaluating possible ageing effects after long high background irradiation periods, e.g. High-Luminosity LHC phase. This challenging research is also part of a task of the European AidaInnova project.
A promising eco-friendly gas identified for RPC operation is the tetrafluoruropropene (C$_{3}$H$_{2}$F$_{4}$, commercially known as HFO-1234ze) that has been studied at the CERN GIF++ in combination with different percentages of CO$_2$. Between the end of 2021 and 2022 several beam tests have been carried out to establish the performance of RPCs operated with such mixtures before starting the irradiation campaign for the ageing study.
Results of these tests for different RPCs layouts and different gas mixtures, under increasing background rates are presented here, together with the preliminary outcome of the detector ageing tests.
△ Less
Submitted 29 November, 2023;
originally announced November 2023.
-
Reduced-order modeling for parameterized PDEs via implicit neural representations
Authors:
Tianshu Wen,
Kookjin Lee,
Youngsoo Choi
Abstract:
We present a new data-driven reduced-order modeling approach to efficiently solve parametrized partial differential equations (PDEs) for many-query problems. This work is inspired by the concept of implicit neural representation (INR), which models physics signals in a continuous manner and independent of spatial/temporal discretization. The proposed framework encodes PDE and utilizes a parametriz…
▽ More
We present a new data-driven reduced-order modeling approach to efficiently solve parametrized partial differential equations (PDEs) for many-query problems. This work is inspired by the concept of implicit neural representation (INR), which models physics signals in a continuous manner and independent of spatial/temporal discretization. The proposed framework encodes PDE and utilizes a parametrized neural ODE (PNODE) to learn latent dynamics characterized by multiple PDE parameters. PNODE can be inferred by a hypernetwork to reduce the potential difficulties in learning PNODE due to a complex multilayer perceptron (MLP). The framework uses an INR to decode the latent dynamics and reconstruct accurate PDE solutions. Further, a physics-informed loss is also introduced to correct the prediction of unseen parameter instances. Incorporating the physics-informed loss also enables the model to be fine-tuned in an unsupervised manner on unseen PDE parameters. A numerical experiment is performed on a two-dimensional Burgers equation with a large variation of PDE parameters. We evaluate the proposed method at a large Reynolds number and obtain up to speedup of O(10^3) and ~1% relative error to the ground truth values.
△ Less
Submitted 27 November, 2023;
originally announced November 2023.
-
Dirac Bilayer Metasurfaces as an Inverse Gires-Tournois Etalon
Authors:
Ki Young Lee,
Kwang Wook Yoo,
Francesco Monticone,
Jae Woong Yoon
Abstract:
Efficient transmissive pure-phase resonances are highly desirable for optical modulation and wavefront engineering. Here, we propose a novel principle to realize a pure-phase resonance in an extremely broad transmission band, as opposed to previous approaches restricted to operating in reflection mode or over a narrow spectral band. We show that a glide-symmetric bilayer metasurface mathematically…
▽ More
Efficient transmissive pure-phase resonances are highly desirable for optical modulation and wavefront engineering. Here, we propose a novel principle to realize a pure-phase resonance in an extremely broad transmission band, as opposed to previous approaches restricted to operating in reflection mode or over a narrow spectral band. We show that a glide-symmetric bilayer metasurface mathematically mimicking a two-dimensional Dirac semimetal induces unidirectional guided-mode excitation and perfect leakage-radiation blazing at the transmission channel. These effects create a peculiar resonant-scattering configuration, similar to the classical reflective Gires-Tournois etalon, but in transmission, providing full 2pi phase modulation with constant transmittance near 100%. Most importantly, this effect persists over an extremely wide band, associated with topological effects. Hence, our proposed approach produces a spectrally and parametrically robust pure-phase resonance effect in transmission, which is highly beneficial for practical applications.
△ Less
Submitted 15 November, 2023;
originally announced November 2023.
-
High-rate tests on Resistive Plate Chambers operated with eco-friendly gas mixtures
Authors:
M. Abbrescia,
G. Aielli,
R. Aly,
M. C. Arena,
M. Barroso,
L. Benussi,
S. Bianco,
F. Bordon,
D. Boscherini,
A. Bruni,
S. Buontempo,
M. Busato,
P. Camarri,
R. Cardarelli,
L. Congedo,
D. De Jesus Damiao,
M. De Serio,
A. Di Ciaccio,
L. Di Stante,
P. Dupieux,
J. Eysermans,
A. Ferretti,
G. Galati,
M. Gagliardi,
R. Guida
, et al. (30 additional authors not shown)
Abstract:
Results obtained by the RPC ECOgas@GIF++ Collaboration, using Resistive Plate Chambers operated with new, eco-friendly gas mixtures, based on Tetrafluoropropene and carbon dioxide, are shown and discussed in this paper. Tests aimed to assess the performance of this kind of detectors in high-irradiation conditions, analogous to the ones foreseen for the coming years at the Large Hadron Collider exp…
▽ More
Results obtained by the RPC ECOgas@GIF++ Collaboration, using Resistive Plate Chambers operated with new, eco-friendly gas mixtures, based on Tetrafluoropropene and carbon dioxide, are shown and discussed in this paper. Tests aimed to assess the performance of this kind of detectors in high-irradiation conditions, analogous to the ones foreseen for the coming years at the Large Hadron Collider experiments, were performed, and demonstrate a performance basically similar to the one obtained with the gas mixtures currently in use, based on Tetrafluoroethane, which is being progressively phased out for its possible contribution to the greenhouse effect. Long term aging tests are also being carried out, with the goal to demonstrate the possibility of using these eco-friendly gas mixtures during the whole High Luminosity phase of the Large Hadron Collider.
△ Less
Submitted 14 November, 2023;
originally announced November 2023.
-
Alpha backgrounds in NaI(Tl) crystals of COSINE-100
Authors:
G. Adhikari,
N. Carlin,
D. F. F. S. Cavalcante,
J. Y. Cho,
J. J. Choi,
S. Choi,
A. C. Ezeribe,
L. E. Franca,
C. Ha,
I. S. Hahn,
S. J. Hollick,
E. J. Jeon,
H. W. Joo,
W. G. Kang,
M. Kauer,
B. H. Kim,
H. J. Kim,
J. Kim,
K. W. Kim,
S. H. Kim,
S. K. Kim,
S. W. Kim,
W. K. Kim,
Y. D. Kim,
Y. H. Kim
, et al. (38 additional authors not shown)
Abstract:
COSINE-100 is a dark matter direct detection experiment with 106 kg NaI(Tl) as the target material. 210Pb and daughter isotopes are a dominant background in the WIMP region of interest and are detected via beta decay and alpha decay. Analysis of the alpha channel complements the background model as observed in the beta/gamma channel. We present the measurement of the quenching factors and Monte Ca…
▽ More
COSINE-100 is a dark matter direct detection experiment with 106 kg NaI(Tl) as the target material. 210Pb and daughter isotopes are a dominant background in the WIMP region of interest and are detected via beta decay and alpha decay. Analysis of the alpha channel complements the background model as observed in the beta/gamma channel. We present the measurement of the quenching factors and Monte Carlo simulation results and activity quantification of the alpha decay components of the COSINE-100 NaI(Tl) crystals. The data strongly indicate that the alpha decays probabilistically undergo two possible quenching factors but require further investigation. The fitted results are consistent with independent measurements and improve the overall understanding of the COSINE-100 backgrounds. Furthermore, the half-life of 216Po has been measured to be 143.4 +/- 1.2 ms, which is consistent with and more precise than recent measurements.
△ Less
Submitted 30 January, 2024; v1 submitted 8 November, 2023;
originally announced November 2023.
-
Low-loss Millimeter-wave Resonators with an Improved Coupling Structure
Authors:
Alexander Anferov,
Shannon P. Harvey,
Fanghui Wan,
Kan-Heng Lee,
Jonathan Simon,
David I. Schuster
Abstract:
Millimeter-wave superconducting resonators are a useful tool for studying quantum device coherence in a new frequency domain. However, improving resonators is difficult without a robust and reliable method for coupling millimeter-wave signals to 2D structures. We develop and characterize a tapered transition structure coupling a rectangular waveguide to a planar slotline waveguide with better than…
▽ More
Millimeter-wave superconducting resonators are a useful tool for studying quantum device coherence in a new frequency domain. However, improving resonators is difficult without a robust and reliable method for coupling millimeter-wave signals to 2D structures. We develop and characterize a tapered transition structure coupling a rectangular waveguide to a planar slotline waveguide with better than 0.5 dB efficiency over 14 GHz, and use it to measure ground-shielded resonators in the W band (75 - 110 GHz). Having decoupled the resonators from radiative losses, we consistently achieve single-photon quality factors above $10^5$, with a two-level-system loss limit above $10^6$, and verify the effectiveness of oxide removal treatments to reduce loss. These values are 4-5 times higher than those previously reported in the W band, and much closer to typical planar microwave resonators. The improved losses demonstrated by these on-chip millimeter-wave devices shed new light on quantum decoherence in a different frequency regime, offer increased selectivity for high-frequency detectors, and enables new possibilities for hybrid quantum experiments integrating millimeter-wave frequencies.
△ Less
Submitted 21 February, 2024; v1 submitted 2 November, 2023;
originally announced November 2023.
-
Geophysical survey based on Hybrid Gravimetry using Relative Measurements and an Atomic Gravimeter as an Absolute Reference
Authors:
Nathan Shettell,
Kai Sheng Lee,
Fong En Oon,
Elizaveta Maksimova,
Christoph Hufnagel,
Shengji Wei,
Rainer Dumke
Abstract:
Gravimetry is a versatile metrological approach in geophysics to accurately map subterranean mass and density anomalies. There is a broad diversification regarding the working principle of gravimeters, wherein atomic gravimeters are one of the most technologically progressive class of gravimeters which can monitor gravity at an absolute scale with a high-repetition without exhibiting drift. Despit…
▽ More
Gravimetry is a versatile metrological approach in geophysics to accurately map subterranean mass and density anomalies. There is a broad diversification regarding the working principle of gravimeters, wherein atomic gravimeters are one of the most technologically progressive class of gravimeters which can monitor gravity at an absolute scale with a high-repetition without exhibiting drift. Despite the apparent utility for geophysical surveys, atomic gravimeters are (currently) laboratory-bound devices due to the vexatious task of transportation. Here, we demonstrated the utility of an atomic gravimeter on-site during a gravity survey, where the issue of immobility was circumvented with a relative spring gravimeter. The atomic gravimeter served as a means to map the relative data from the spring gravimeter to an absolute measurement with an effective precision of 7.7$μ$Gal. Absolute measurements provide a robust and feasible method to define and control gravity data taken at different sites, or a later date, which is critical to analyze underground geological units, in particular when it is combined with other geophysical approaches.
△ Less
Submitted 25 March, 2024; v1 submitted 1 November, 2023;
originally announced November 2023.
-
Validation of SOLPS-ITER Simulations against the TCV-X21 Reference Case
Authors:
Y. Wang,
C. Colandrea,
D. S. Oliveira,
C. Theiler,
H. Reimerdes,
T. Body,
D. Galassi,
L. Martinelli,
K. Lee,
TCV team
Abstract:
This paper presents a quantitative validation of SOLPS-ITER simulations against the TCV-X21 reference case and provides insights into the neutral dynamics and ionization source distribution in this scenario. TCV-X21 is a well-diagnosed diverted L-mode sheath-limited plasma scenario in both toroidal field directions, designed specifically for the validation of turbulence codes [D.S. Oliveira, T. Bo…
▽ More
This paper presents a quantitative validation of SOLPS-ITER simulations against the TCV-X21 reference case and provides insights into the neutral dynamics and ionization source distribution in this scenario. TCV-X21 is a well-diagnosed diverted L-mode sheath-limited plasma scenario in both toroidal field directions, designed specifically for the validation of turbulence codes [D.S. Oliveira, T. Body, et al 2022 Nucl. Fusion 62 096001]. Despite the optimization to reduce the impact of the neutral dynamics, the absence of neutrals in previous turbulence simulations of TCV-X21 was identified as a possible explanation for the disagreements with the experimental data in the divertor region. This motivates the present study with SOLPS-ITER that includes kinetic neutral dynamics via EIRENE. Five new observables are added to the extensive, publicly available TCV-X21 dataset. These are three deuterium Balmer lines in the divertor and neutral pressure in the common and private flux regions. The quantitative agreement metric is combined with the conjugate gradient method to approach the SOLPS-ITER input parameters that return the best overall agreement with the experiment. A proof-of-principle of this method results in a modest improvement in the level-of-agreement; shortcomings of the method and how to improve it are discussed. Alternatively, a scan of the particle and heat diffusion coefficients shows an improvement of 10.4% beyond the agreement level achieved by the gradient method. The result is found for an increased transport coefficient compared to what is usually used for TCV L-mode plasmas, suggesting the need for accurate self-consistent turbulence models for predictive boundary simulations. The simulations indicate that ~65% of the total ionization occurs in the SOL, motivating the inclusion of neutrals in future turbulence simulations towards improved agreement with the experiment.
△ Less
Submitted 26 October, 2023;
originally announced October 2023.
-
Recent advances in label-free imaging and quantification techniques for the study of lipid droplets in cells
Authors:
Hyeonwoo Kim,
Seungeun Oh,
Seongsoo Lee,
Kwang suk Lee,
YongKeun Park
Abstract:
Lipid droplets (LDs), once considered mere storage depots for lipids, have gained recognition for their intricate roles in cellular processes, including metabolism, membrane trafficking, and disease states like obesity and cancer. This review explores label-free imaging techniques' applications in LD research. We discuss holotomography and vibrational spectroscopic microscopy, emphasizing their po…
▽ More
Lipid droplets (LDs), once considered mere storage depots for lipids, have gained recognition for their intricate roles in cellular processes, including metabolism, membrane trafficking, and disease states like obesity and cancer. This review explores label-free imaging techniques' applications in LD research. We discuss holotomography and vibrational spectroscopic microscopy, emphasizing their potential for studying LDs without molecular labels, and we highlight the growing integration of artificial intelligence. Clinical applications in disease diagnosis and therapy are also considered.
△ Less
Submitted 25 October, 2023;
originally announced October 2023.
-
Hypernetwork-based Meta-Learning for Low-Rank Physics-Informed Neural Networks
Authors:
Woojin Cho,
Kookjin Lee,
Donsub Rim,
Noseong Park
Abstract:
In various engineering and applied science applications, repetitive numerical simulations of partial differential equations (PDEs) for varying input parameters are often required (e.g., aircraft shape optimization over many design parameters) and solvers are required to perform rapid execution. In this study, we suggest a path that potentially opens up a possibility for physics-informed neural net…
▽ More
In various engineering and applied science applications, repetitive numerical simulations of partial differential equations (PDEs) for varying input parameters are often required (e.g., aircraft shape optimization over many design parameters) and solvers are required to perform rapid execution. In this study, we suggest a path that potentially opens up a possibility for physics-informed neural networks (PINNs), emerging deep-learning-based solvers, to be considered as one such solver. Although PINNs have pioneered a proper integration of deep-learning and scientific computing, they require repetitive time-consuming training of neural networks, which is not suitable for many-query scenarios. To address this issue, we propose a lightweight low-rank PINNs containing only hundreds of model parameters and an associated hypernetwork-based meta-learning algorithm, which allows efficient approximation of solutions of PDEs for varying ranges of PDE input parameters. Moreover, we show that the proposed method is effective in overcoming a challenging issue, known as "failure modes" of PINNs.
△ Less
Submitted 14 October, 2023;
originally announced October 2023.
-
Towards Foundation Models for Materials Science: The Open MatSci ML Toolkit
Authors:
Kin Long Kelvin Lee,
Carmelo Gonzales,
Matthew Spellings,
Mikhail Galkin,
Santiago Miret,
Nalini Kumar
Abstract:
Artificial intelligence and machine learning have shown great promise in their ability to accelerate novel materials discovery. As researchers and domain scientists seek to unify and consolidate chemical knowledge, the case for models with potential to generalize across different tasks within materials science - so-called "foundation models" - grows with ambitions. This manuscript reviews our rece…
▽ More
Artificial intelligence and machine learning have shown great promise in their ability to accelerate novel materials discovery. As researchers and domain scientists seek to unify and consolidate chemical knowledge, the case for models with potential to generalize across different tasks within materials science - so-called "foundation models" - grows with ambitions. This manuscript reviews our recent progress with development of Open MatSci ML Toolkit, and details experiments that lay the groundwork for foundation model research and development with our framework. First, we describe and characterize a new pretraining task that uses synthetic data generated from symmetry operations, and reveal complex training dynamics at large scales. Using the pretrained model, we discuss a number of use cases relevant to foundation model development: semantic architecture of datasets, and fine-tuning for property prediction and classification. Our key results show that for simple applications, pretraining appears to provide worse modeling performance than training models from random initialization. However, for more complex instances, such as when a model is required to learn across multiple datasets and types of targets simultaneously, the inductive bias from pretraining provides significantly better performance. This insight will hopefully inform subsequent efforts into creating foundation models for materials science applications.
△ Less
Submitted 11 October, 2023;
originally announced October 2023.
-
Pulsed-mode metalorganic vapor-phase epitaxy of GaN on graphene-coated c-sapphire for freestanding GaN thin films
Authors:
Seokje Lee,
Muhammad S. Abbas,
Dongha Yoo,
Keundong Lee,
Tobiloba G. Fabunmi,
Eunsu Lee,
Han Ik Kim,
Imhwan Kim,
Daniel Jang,
Sangmin Lee,
Jusang Lee,
Ki-Tae Park,
Changgu Lee,
Miyoung Kim,
Yun Seog Lee,
Celesta S. Chang,
Gyu-Chul Yi
Abstract:
We report the growth of high-quality GaN epitaxial thin films on graphene-coated c-sapphire substrates using pulsed-mode metalorganic vapor-phase epitaxy, together with the fabrication of freestanding GaN films by simple mechanical exfoliation for transferable light-emitting diodes (LEDs). High-quality GaN films grown on the graphene-coated sapphire substrates were easily lifted off using thermal…
▽ More
We report the growth of high-quality GaN epitaxial thin films on graphene-coated c-sapphire substrates using pulsed-mode metalorganic vapor-phase epitaxy, together with the fabrication of freestanding GaN films by simple mechanical exfoliation for transferable light-emitting diodes (LEDs). High-quality GaN films grown on the graphene-coated sapphire substrates were easily lifted off using thermal release tape and transferred onto foreign substrates. Furthermore, we revealed that the pulsed operation of ammonia flow during GaN growth was a critical factor for the fabrication of high-quality freestanding GaN films. These films, exhibiting excellent single crystallinity, were utilized to fabricate transferable GaN LEDs by heteroepitaxially growing InxGa1-xN/GaN multiple quantum wells and a p-GaN layer on the GaN films, showing their potential application in advanced optoelectronic devices.
△ Less
Submitted 5 December, 2023; v1 submitted 8 October, 2023;
originally announced October 2023.
-
Learning algorithms for identification of whisky using portable Raman spectroscopy
Authors:
Kwang Jun Lee,
Alexander C. Trowbridge,
Graham D. Bruce,
George O. Dwapanyin,
Kylie R. Dunning,
Kishan Dholakia,
Erik P. Schartner
Abstract:
Reliable identification of high-value products such as whisky is an increasingly important area, as issues such as brand substitution (i.e. fraudulent products) and quality control are critical to the industry. We have examined a range of machine learning algorithms and interfaced them directly with a portable Raman spectroscopy device to both identify and characterize the ethanol/methanol concent…
▽ More
Reliable identification of high-value products such as whisky is an increasingly important area, as issues such as brand substitution (i.e. fraudulent products) and quality control are critical to the industry. We have examined a range of machine learning algorithms and interfaced them directly with a portable Raman spectroscopy device to both identify and characterize the ethanol/methanol concentrations of commercial whisky samples. We demonstrate that machine learning models can achieve over 99% accuracy in brand identification across twenty-eight commercial samples. To demonstrate the flexibility of this approach we utilised the same samples and algorithms to quantify ethanol concentrations, as well as measuring methanol levels in spiked whisky samples. Our machine learning techniques are then combined with a through-the-bottle method to perform spectral analysis and identification without requiring the sample to be decanted from the original container, showing the practical potential of this approach to the detection of counterfeit or adulterated spirits and other high value liquid samples.
△ Less
Submitted 21 September, 2023;
originally announced September 2023.
-
Bespoke Nanoparticle Synthesis and Chemical Knowledge Discovery Via Autonomous Experimentations
Authors:
Hyuk Jun Yoo,
Nayeon Kim,
Heeseung Lee,
Daeho Kim,
Leslie Tiong Ching Ow,
Hyobin Nam,
Chansoo Kim,
Seung Yong Lee,
Kwan-Young Lee,
Donghun Kim,
Sang Soo Han
Abstract:
The optimization of nanomaterial synthesis using numerous synthetic variables is considered to be extremely laborious task because the conventional combinatorial explorations are prohibitively expensive. In this work, we report an autonomous experimentation platform developed for the bespoke design of nanoparticles (NPs) with targeted optical properties. This platform operates in a closed-loop man…
▽ More
The optimization of nanomaterial synthesis using numerous synthetic variables is considered to be extremely laborious task because the conventional combinatorial explorations are prohibitively expensive. In this work, we report an autonomous experimentation platform developed for the bespoke design of nanoparticles (NPs) with targeted optical properties. This platform operates in a closed-loop manner between a batch synthesis module of NPs and a UV- Vis spectroscopy module, based on the feedback of the AI optimization modeling. With silver (Ag) NPs as a representative example, we demonstrate that the Bayesian optimizer implemented with the early stopping criterion can efficiently produce Ag NPs precisely possessing the desired absorption spectra within only 200 iterations (when optimizing among five synthetic reagents). In addition to the outstanding material developmental efficiency, the analysis of synthetic variables further reveals a novel chemistry involving the effects of citrate in Ag NP synthesis. The amount of citrate is a key to controlling the competitions between spherical and plate-shaped NPs and, as a result, affects the shapes of the absorption spectra as well. Our study highlights both capabilities of the platform to enhance search efficiencies and to provide a novel chemical knowledge by analyzing datasets accumulated from the autonomous experimentations.
△ Less
Submitted 1 September, 2023;
originally announced September 2023.
-
Injection-Limited and Space-Charge-Limited Conduction in Wide Bandgap Semiconductors with Velocity Saturation Effect
Authors:
Kok Wai Lee,
Yee Sin Ang
Abstract:
Carrier conduction in wide bandgap semiconductors (WBS) often exhibits velocity saturation at the high-electric field regime. How such effect influences the transition between contact-limited and space-charge-limited current in a two-terminal device remains largely unexplored thus far. Here, we develop a generalized carrier transport model that includes contact-limited field-induced carrier inject…
▽ More
Carrier conduction in wide bandgap semiconductors (WBS) often exhibits velocity saturation at the high-electric field regime. How such effect influences the transition between contact-limited and space-charge-limited current in a two-terminal device remains largely unexplored thus far. Here, we develop a generalized carrier transport model that includes contact-limited field-induced carrier injection, space charge, carrier scattering and velocity saturation effect. The model reveals various transitional behaviors in the current-voltage characteristics, encompassing Fowler-Nordheim emission, trap-free Mott-Gurney (MG) SCLC and \emph{velocity-saturated SCLC}. Using GaN, 6H-SiC and 4H-SiC WBS as examples, we show that the velocity-saturated SCLC completely dominates the high-voltage ($10^2 \sim 10^4$ V) transport for typical sub-$μ$m GaN and SiC diodes, thus unravelling velocity-saturated SCLC as a central transport mechanism in WBG electronics.
△ Less
Submitted 2 August, 2023;
originally announced August 2023.
-
Understanding Dynamics in Coarse-Grained Models: III. Roles of Rotational Motion and Translation-Rotation Coupling in Coarse-Grained Dynamics
Authors:
Jaehyeok Jin,
Eok Kyun Lee,
Gregory A. Voth
Abstract:
This paper series aims to establish a complete correspondence between fine-grained (FG) and coarse-grained (CG) dynamics by way of excess entropy scaling (introduced in Paper I). While Paper II successfully captured translational motions in CG systems using a hard sphere mapping, the absence of rotational motions in single-site CG models introduces differences between FG and CG dynamics. In this t…
▽ More
This paper series aims to establish a complete correspondence between fine-grained (FG) and coarse-grained (CG) dynamics by way of excess entropy scaling (introduced in Paper I). While Paper II successfully captured translational motions in CG systems using a hard sphere mapping, the absence of rotational motions in single-site CG models introduces differences between FG and CG dynamics. In this third paper, our objective is to faithfully recover atomistic diffusion coefficients from CG dynamics by incorporating rotational dynamics. By extracting FG rotational diffusion, we unravel, for the first time reported to our knowledge, a universality in excess entropy scaling between the rotational and translational diffusion. Once the missing rotational dynamics are integrated into the CG translational dynamics, an effective translation-rotation coupling becomes essential. We propose two different approaches for estimating this coupling parameter: the rough hard sphere theory with acentric factor (temperature-independent) or the rough Lennard-Jones model with CG attractions (temperature-dependent). Altogether, we demonstrate that FG diffusion coefficients can be recovered from CG diffusion coefficients by (1) incorporating "entropy-free" rotational diffusion with translation-rotation coupling and (2) recapturing the missing entropy. Our findings shed light on the fundamental relationship between FG and CG dynamics in molecular fluids.
△ Less
Submitted 31 July, 2023;
originally announced July 2023.
-
Search for inelastic WIMP-iodine scattering with COSINE-100
Authors:
G. Adhikari,
N. Carlin,
J. J. Choi,
S. Choi,
A. C. Ezeribe,
L. E. Franca,
C. Ha,
I. S. Hahn,
S. J. Hollick,
E. J. Jeon,
J. H. Jo,
H. W. Joo,
W. G. Kang,
M. Kauer,
B. H. Kim,
H. J. Kim,
J. Kim,
K. W. Kim,
S. H. Kim,
S. K. Kim,
W. K. Kim,
Y. D. Kim,
Y. H. Kim,
Y. J. Ko,
D. H. Lee
, et al. (34 additional authors not shown)
Abstract:
We report the results of a search for inelastic scattering of weakly interacting massive particles (WIMPs) off $^{127}$I nuclei using NaI(Tl) crystals with a data exposure of 97.7 kg$\cdot$years from the COSINE-100 experiment. The signature of inelastic WIMP-$^{127}$I scattering is a nuclear recoil accompanied by a 57.6 keV $γ$-ray from the prompt deexcitation, producing a more energetic signal co…
▽ More
We report the results of a search for inelastic scattering of weakly interacting massive particles (WIMPs) off $^{127}$I nuclei using NaI(Tl) crystals with a data exposure of 97.7 kg$\cdot$years from the COSINE-100 experiment. The signature of inelastic WIMP-$^{127}$I scattering is a nuclear recoil accompanied by a 57.6 keV $γ$-ray from the prompt deexcitation, producing a more energetic signal compared to the typical WIMP nuclear recoil signal. We found no evidence for this inelastic scattering signature and set a 90 $\%$ confidence level upper limit on the WIMP-proton spin-dependent, inelastic scattering cross section of $1.2 \times 10^{-37} {\rm cm^{2}}$ at the WIMP mass 500 ${\rm GeV/c^{2}}$.
△ Less
Submitted 30 October, 2023; v1 submitted 19 July, 2023;
originally announced July 2023.
-
Floquet-Tailored Rydberg Interactions
Authors:
Luheng Zhao,
Michael Dao Kang Lee,
Mohammad Mujahid Aliyu,
Huanqian Loh
Abstract:
The Rydberg blockade is a key ingredient for entangling atoms in arrays. However, it requires atoms to be spaced well within the blockade radius, which limits the range of local quantum gates. Here we break this constraint using Floquet frequency modulation, with which we demonstrate Rydberg-blockade entanglement beyond the traditional blockade radius and show how the enlarged entanglement range i…
▽ More
The Rydberg blockade is a key ingredient for entangling atoms in arrays. However, it requires atoms to be spaced well within the blockade radius, which limits the range of local quantum gates. Here we break this constraint using Floquet frequency modulation, with which we demonstrate Rydberg-blockade entanglement beyond the traditional blockade radius and show how the enlarged entanglement range improves qubit connectivity in a neutral atom array. Further, we find that the coherence of entangled states can be extended under Floquet frequency modulation. Finally, we realize Rydberg anti-blockade states for two sodium Rydberg atoms within the blockade radius. Such Rydberg anti-blockade states for atoms at close range enables the robust preparation of strongly-interacting, long-lived Rydberg states, yet their steady-state population cannot be achieved with only the conventional static drive. Our work transforms between the paradigmatic regimes of Rydberg blockade versus anti-blockade and paves the way for realizing more connected, coherent, and tunable neutral atom quantum processors with a single approach.
△ Less
Submitted 7 November, 2023; v1 submitted 14 June, 2023;
originally announced June 2023.
-
Improved Coherence in Optically-Defined Niobium Trilayer Junction Qubits
Authors:
Alexander Anferov,
Kan-Heng Lee,
Fang Zhao,
Jonathan Simon,
David I. Schuster
Abstract:
Niobium offers the benefit of increased operating temperatures and frequencies for Josephson junctions, which are the core component of superconducting devices. However existing niobium processes are limited by more complicated fabrication methods and higher losses than now-standard aluminum junctions. Combining recent trilayer fabrication advancements, methods to remove lossy dielectrics and mode…
▽ More
Niobium offers the benefit of increased operating temperatures and frequencies for Josephson junctions, which are the core component of superconducting devices. However existing niobium processes are limited by more complicated fabrication methods and higher losses than now-standard aluminum junctions. Combining recent trilayer fabrication advancements, methods to remove lossy dielectrics and modern superconducting qubit design, we revisit niobium trilayer junctions and fabricate all-niobium transmons using only optical lithography. We characterize devices in the microwave domain, measuring coherence times up to $62~μ$s and an average qubit quality factor above $10^5$: much closer to state-of-the-art aluminum-junction devices. We find the higher superconducting gap energy also results in reduced quasiparticle sensitivity above $0.16~$K, where aluminum junction performance deteriorates. Our junction process is readily applied to standard optical-based foundry processes, opening new avenues for direct integration and scalability, and paves the way for higher-temperature and higher-frequency quantum devices.
△ Less
Submitted 21 February, 2024; v1 submitted 9 June, 2023;
originally announced June 2023.
-
Computational 3D topographic microscopy from terabytes of data per sample
Authors:
Kevin C. Zhou,
Mark Harfouche,
Maxwell Zheng,
Joakim Jönsson,
Kyung Chul Lee,
Ron Appel,
Paul Reamey,
Thomas Doman,
Veton Saliu,
Gregor Horstmeyer,
Roarke Horstmeyer
Abstract:
We present a large-scale computational 3D topographic microscope that enables 6-gigapixel profilometric 3D imaging at micron-scale resolution across $>$110 cm$^2$ areas over multi-millimeter axial ranges. Our computational microscope, termed STARCAM (Scanning Topographic All-in-focus Reconstruction with a Computational Array Microscope), features a parallelized, 54-camera architecture with 3-axis…
▽ More
We present a large-scale computational 3D topographic microscope that enables 6-gigapixel profilometric 3D imaging at micron-scale resolution across $>$110 cm$^2$ areas over multi-millimeter axial ranges. Our computational microscope, termed STARCAM (Scanning Topographic All-in-focus Reconstruction with a Computational Array Microscope), features a parallelized, 54-camera architecture with 3-axis translation to capture, for each sample of interest, a multi-dimensional, 2.1-terabyte (TB) dataset, consisting of a total of 224,640 9.4-megapixel images. We developed a self-supervised neural network-based algorithm for 3D reconstruction and stitching that jointly estimates an all-in-focus photometric composite and 3D height map across the entire field of view, using multi-view stereo information and image sharpness as a focal metric. The memory-efficient, compressed differentiable representation offered by the neural network effectively enables joint participation of the entire multi-TB dataset during the reconstruction process. To demonstrate the broad utility of our new computational microscope, we applied STARCAM to a variety of decimeter-scale objects, with applications ranging from cultural heritage to industrial inspection.
△ Less
Submitted 5 June, 2023;
originally announced June 2023.
-
Beyond Walker Breakdown through the Resonant Dissipation: Dramatic Enhancement of Magnetic Domain Wall Velocity via Resonant Excitation of Standing Wave Modes of Domain Wall Structure
Authors:
Ganghwi Kim,
Dae-Han Jung,
Hee-Sung Han,
Ki-Suk Lee
Abstract:
The dynamic behaviors of magnetic domain walls have significant implications for developing advanced spintronic devices. In this study, we investigate the intriguing resonance phenomenon within the magnetic domain wall structure and its profound influence on dynamic motion, focusing on the dissipation mechanism. By applying a static external magnetic field, we observe a remarkable amplification of…
▽ More
The dynamic behaviors of magnetic domain walls have significant implications for developing advanced spintronic devices. In this study, we investigate the intriguing resonance phenomenon within the magnetic domain wall structure and its profound influence on dynamic motion, focusing on the dissipation mechanism. By applying a static external magnetic field, we observe a remarkable amplification of domain wall velocity, surpassing the limitations of the conventional one-dimensional model. To quantify this enhancement, we introduce a novel parameter, the distortion variation rate, which captures the rapid and pronounced changes occurring within the domain wall structure. Through comprehensive micromagnetic simulations, we establish a robust relationship between speed and distortion variation rate, thereby validating our theoretical framework. Our findings provide crucial insights into the underlying mechanisms governing domain wall dynamics while paving the way for developing and optimizing next-generation spintronic devices boasting unparalleled speed and efficiency.
△ Less
Submitted 25 July, 2023; v1 submitted 24 May, 2023;
originally announced May 2023.
-
Unsupervised sequence-to-sequence learning for automatic signal quality assessment in multi-channel electrical impedance-based hemodynamic monitoring
Authors:
Chang Min Hyun,
Tae-Geun Kim,
Kyounghun Lee
Abstract:
This study proposes an unsupervised sequence-to-sequence learning approach that automatically assesses the motion-induced reliability degradation of the cardiac volume signal (CVS) in multi-channel electrical impedance-based hemodynamic monitoring. The proposed method attempts to tackle shortcomings in existing learning-based assessment approaches, such as the requirement of manual annotation for…
▽ More
This study proposes an unsupervised sequence-to-sequence learning approach that automatically assesses the motion-induced reliability degradation of the cardiac volume signal (CVS) in multi-channel electrical impedance-based hemodynamic monitoring. The proposed method attempts to tackle shortcomings in existing learning-based assessment approaches, such as the requirement of manual annotation for motion influence and the lack of explicit mechanisms for realizing motion-induced abnormalities under contextual variations in CVS over time. By utilizing long-short term memory and variational auto-encoder structures, an encoder--decoder model is trained not only to self-reproduce an input sequence of the CVS but also to extrapolate the future in a parallel fashion. By doing so, the model can capture contextual knowledge lying in a temporal CVS sequence while being regularized to explore a general relationship over the entire time-series. A motion-influenced CVS of low-quality is detected, based on the residual between the input sequence and its neural representation with a cut--off value determined from the two-sigma rule of thumb over the training set. Our experimental observations validated two claims: (i) in the learning environment of label-absence, assessment performance is achievable at a competitive level to the supervised setting, and (ii) the contextual information across a time series of CVS is advantageous for effectively realizing motion-induced unrealistic distortions in signal amplitude and morphology. We also investigated the capability as a pseudo-labeling tool to minimize human-craft annotation by preemptively providing strong candidates for motion-induced anomalies. Empirical evidence has shown that machine-guided annotation can reduce inevitable human-errors during manual assessment while minimizing cumbersome and time-consuming processes.
△ Less
Submitted 17 May, 2023; v1 submitted 16 May, 2023;
originally announced May 2023.
-
Tensorial tomographic Fourier Ptychography with applications to muscle tissue imaging
Authors:
Shiqi Xu,
Xiang Dai,
Paul Ritter,
Kyung Chul Lee,
Xi Yang,
Lucas Kreiss,
Kevin C. Zhou,
Kanghyun Kim,
Amey Chaware,
Jadee Neff,
Carolyn Glass,
Seung Ah Lee,
Oliver Friedrich,
Roarke Horstmeyer
Abstract:
We report Tensorial tomographic Fourier Ptychography (ToFu), a new non-scanning label-free tomographic microscopy method for simultaneous imaging of quantitative phase and anisotropic specimen information in 3D. Built upon Fourier Ptychography, a quantitative phase imaging technique, ToFu additionally highlights the vectorial nature of light. The imaging setup consists of a standard microscope equ…
▽ More
We report Tensorial tomographic Fourier Ptychography (ToFu), a new non-scanning label-free tomographic microscopy method for simultaneous imaging of quantitative phase and anisotropic specimen information in 3D. Built upon Fourier Ptychography, a quantitative phase imaging technique, ToFu additionally highlights the vectorial nature of light. The imaging setup consists of a standard microscope equipped with an LED matrix, a polarization generator, and a polarization-sensitive camera. Permittivity tensors of anisotropic samples are computationally recovered from polarized intensity measurements across three dimensions. We demonstrate ToFu's efficiency through volumetric reconstructions of refractive index, birefringence, and orientation for various validation samples, as well as tissue samples from muscle fibers and diseased heart tissue. Our reconstructions of muscle fibers resolve their 3D fine-filament structure and yield consistent morphological measurements compared to gold-standard second harmonic generation scanning confocal microscope images found in the literature. Additionally, we demonstrate reconstructions of a heart tissue sample that carries important polarization information for detecting cardiac amyloidosis.
△ Less
Submitted 13 May, 2023; v1 submitted 8 May, 2023;
originally announced May 2023.
-
Impact of Climate Simulation Resolutions on Future Energy System Reliability Assessment: A Texas Case Study
Authors:
Xiangtian Zheng,
Le Xie,
Kiyeob Lee,
Dan Fu,
Jiahan Wu,
Ping Chang
Abstract:
The reliability of energy systems is strongly influenced by the prevailing climate conditions. With the increasing prevalence of renewable energy sources, the interdependence between energy and climate systems has become even stronger. This study examines the impact of different spatial resolutions in climate modeling on energy grid reliability assessment, with the Texas interconnection between 20…
▽ More
The reliability of energy systems is strongly influenced by the prevailing climate conditions. With the increasing prevalence of renewable energy sources, the interdependence between energy and climate systems has become even stronger. This study examines the impact of different spatial resolutions in climate modeling on energy grid reliability assessment, with the Texas interconnection between 2033 and 2043 serving as a pilot case study. Our preliminary findings indicate that while low-resolution climate simulations can provide a rough estimate of system reliability, high-resolution simulations can provide more informative assessment of low-adequacy extreme events. Furthermore, both high and low-resolution assessments suggest the need to prepare for severe blackout events in winter due to extremely low temperatures.
△ Less
Submitted 5 May, 2023;
originally announced May 2023.
-
Deposition and alignment of fiber suspensions by dip coating
Authors:
Deok-Hoon Jeong,
Langqi Xing,
Michael Ka Ho Lee,
Nathan Vani,
Alban Sauret
Abstract:
The dip coating of suspensions made of monodisperse non-Brownian spherical particles dispersed in a Newtonian fluid leads to different coating regimes depending on the ratio of the particle diameter to the thickness of the film entrained on the substrate. In particular, dilute particles dispersed in the liquid are entrained only above a threshold value of film thickness. In the case of anisotropic…
▽ More
The dip coating of suspensions made of monodisperse non-Brownian spherical particles dispersed in a Newtonian fluid leads to different coating regimes depending on the ratio of the particle diameter to the thickness of the film entrained on the substrate. In particular, dilute particles dispersed in the liquid are entrained only above a threshold value of film thickness. In the case of anisotropic particles, in particular fibers, the smallest characteristic dimension will control the entrainment of the particle. Furthermore, it is possible to control the orientation of the anisotropic particles depending on the substrate geometry. To test the hypotheses, we performed dip-coating experiments with dilute suspensions of non-Brownian fibers with different length-to-diameter aspect ratios. We characterize the number of fibers entrained on the surface of the substrate as a function of the withdrawal velocity, allowing us to estimate a threshold capillary number below which all the particles remain in the liquid bath. Besides, we measure the angular distribution of the entrained fibers for two different substrate geometries: flat plates and cylindrical rods. We then measure the film thickness for more concentrated fiber suspensions. The entrainment of the fibers on a flat plate and a cylindrical rod is primarily controlled by the smaller characteristic length of the fibers: their diameter. At first order, the entrainment threshold scales similarly to that of spherical particles. The length of the fibers only appears to have a minor influence on the entrainment threshold. No preferential alignment is observed for non-Brownian fibers on a flat plate, except for very thin films, whereas the fibers tend to align themselves along the axis of a cylindrical rod for a large enough ratio of the fiber length to the radius of the cylindrical rod.
△ Less
Submitted 1 May, 2023;
originally announced May 2023.
-
Third-order exceptional point in an ion-cavity system
Authors:
Jinuk Kim,
Taegyu Ha,
Donggeon Kim,
Dowon Lee,
Ki-Se Lee,
Jongcheol Won,
Youngil Moon,
Moonjoo Lee
Abstract:
We investigate a scheme for observing the third-order exceptional point (EP3) in an ion-cavity setting. In the lambda-type level configuration, the ion is driven by a pump field, and the resonator is probed with another weak laser field. We exploit the highly asymmetric branching ratio of an ion's excited state to satisfy the weak-excitation limit, which allows us to construct the non-Hermitian Ha…
▽ More
We investigate a scheme for observing the third-order exceptional point (EP3) in an ion-cavity setting. In the lambda-type level configuration, the ion is driven by a pump field, and the resonator is probed with another weak laser field. We exploit the highly asymmetric branching ratio of an ion's excited state to satisfy the weak-excitation limit, which allows us to construct the non-Hermitian Hamiltonian $(H_{\textrm{nH}})$. Via fitting the cavity-transmission spectrum, the eigenvalues of $H_{\textrm{nH}}$ are obtained. The EP3 appears at a point where the Rabi frequency of the pump laser and the atom-cavity coupling constant balance the loss rates of the system. Feasible experimental parameters are provided.
△ Less
Submitted 5 November, 2023; v1 submitted 12 April, 2023;
originally announced April 2023.
-
Search for bosonic super-weakly interacting massive particles at COSINE-100
Authors:
G. Adhikari,
N. Carlin,
J. J. Choi,
S. Choi,
A. C. Ezeribe,
L. E. Franca,
C. Ha,
I. S. Hahn,
S. J. Hollick,
E. J. Jeon,
J. H. Jo,
H. W. Joo,
W. G. Kang,
M. Kauer,
B. H. Kim,
H. J. Kim,
J. Kim,
K. W. Kim,
S. H. Kim,
S. K. Kim,
W. K. Kim,
Y. D. Kim,
Y. H. Kim,
Y. J. Ko,
D. H. Lee
, et al. (34 additional authors not shown)
Abstract:
We present results of a search for bosonic super-weakly interacting massive particles (BSW) as keV scale dark matter candidates that is based on an exposure of 97.7 kg$\cdot$year from the COSINE experiment. In this search, we employ, for the first time, Compton-like as well as absorption processes for pseudoscalar and vector BSWs. No evidence for BSWs is found in the mass range from 10…
▽ More
We present results of a search for bosonic super-weakly interacting massive particles (BSW) as keV scale dark matter candidates that is based on an exposure of 97.7 kg$\cdot$year from the COSINE experiment. In this search, we employ, for the first time, Compton-like as well as absorption processes for pseudoscalar and vector BSWs. No evidence for BSWs is found in the mass range from 10 $\mathrm{keV/c}^2$ to 1 $\mathrm{MeV/c}^2$, and we present the exclusion limits on the dimensionless coupling constants to electrons $g_{ae}$ for pseudoscalar and $κ$ for vector BSWs at 90% confidence level. Our results show that these limits are improved by including the Compton-like process in masses of BSW, above $\mathcal{O}(100\,\mathrm{keV/c}^2)$.
△ Less
Submitted 27 August, 2023; v1 submitted 3 April, 2023;
originally announced April 2023.
-
Realization of Non-Hermitian Hopf Bundle Matter
Authors:
Yung Kim,
Hee Chul Park,
Minwook Kyung,
Kyungmin Lee,
Jung-Wan Ryu,
Oubo You,
Shuang Zhang,
Bumki Min,
Moon Jip Park
Abstract:
Line excitations in topological phases are a subject of particular interest because their mutual linking structures encode robust topological information of matter. It has been recently shown that the linking and winding of complex eigenenergy strings can classify one-dimensional non-Hermitian topological matter. However, in higher dimensions, bundles of linked strings can emerge such that every s…
▽ More
Line excitations in topological phases are a subject of particular interest because their mutual linking structures encode robust topological information of matter. It has been recently shown that the linking and winding of complex eigenenergy strings can classify one-dimensional non-Hermitian topological matter. However, in higher dimensions, bundles of linked strings can emerge such that every string is mutually linked with all the other strings. Interestingly, despite being an unconventional topological structure, a non-Hermitian Hopf bundle has not been experimentally clarified. Here, we make the first attempt to explore the non-Hermitian Hopf bundle by visualizing the global linking structure of spinor strings in the momentum space of a two-dimensional electric circuit. By exploiting the flexibility of reconfigurable couplings between circuit nodes, we can study the non-Hermitian topological phase transition and gain insight into the intricate structure of the Hopf bundle. Furthermore, we find that the emergence of a higher-order skin effect in real space is accompanied by the linking of spinor strings in momentum space, revealing a bulk-boundary correspondence between the two domains. The proposed non-Hermitian Hopf bundle platform and visualization methodology pave the way to design new topologically robust non-Hermitian phases of matter.
△ Less
Submitted 23 March, 2023;
originally announced March 2023.
-
Digital staining in optical microscopy using deep learning -- a review
Authors:
Lucas Kreiss,
Shaowei Jiang,
Xiang Li,
Shiqi Xu,
Kevin C. Zhou,
Alexander Mühlberg,
Kyung Chul Lee,
Kanghyun Kim,
Amey Chaware,
Michael Ando,
Laura Barisoni,
Seung Ah Lee,
Guoan Zheng,
Kyle Lafata,
Oliver Friedrich,
Roarke Horstmeyer
Abstract:
Until recently, conventional biochemical staining had the undisputed status as well-established benchmark for most biomedical problems related to clinical diagnostics, fundamental research and biotechnology. Despite this role as gold-standard, staining protocols face several challenges, such as a need for extensive, manual processing of samples, substantial time delays, altered tissue homeostasis,…
▽ More
Until recently, conventional biochemical staining had the undisputed status as well-established benchmark for most biomedical problems related to clinical diagnostics, fundamental research and biotechnology. Despite this role as gold-standard, staining protocols face several challenges, such as a need for extensive, manual processing of samples, substantial time delays, altered tissue homeostasis, limited choice of contrast agents for a given sample, 2D imaging instead of 3D tomography and many more. Label-free optical technologies, on the other hand, do not rely on exogenous and artificial markers, by exploiting intrinsic optical contrast mechanisms, where the specificity is typically less obvious to the human observer. Over the past few years, digital staining has emerged as a promising concept to use modern deep learning for the translation from optical contrast to established biochemical contrast of actual stainings. In this review article, we provide an in-depth analysis of the current state-of-the-art in this field, suggest methods of good practice, identify pitfalls and challenges and postulate promising advances towards potential future implementations and applications.
△ Less
Submitted 14 March, 2023;
originally announced March 2023.
-
Transformation of social relationships in COVID-19 America: Remote communication may amplify political echo chambers
Authors:
Byungkyu Lee,
Kangsan Lee,
Benjamin Hartmann
Abstract:
The COVID-19 pandemic, with millions of Americans compelled to stay home and work remotely, presented an opportunity to explore the dynamics of social relationships in a predominantly remote world. Using the 1972-2022 General Social Surveys, we found that the pandemic significantly disrupted the patterns of social gatherings with family, friends, and neighbors, but only momentarily. Drawing from t…
▽ More
The COVID-19 pandemic, with millions of Americans compelled to stay home and work remotely, presented an opportunity to explore the dynamics of social relationships in a predominantly remote world. Using the 1972-2022 General Social Surveys, we found that the pandemic significantly disrupted the patterns of social gatherings with family, friends, and neighbors, but only momentarily. Drawing from the nationwide ego-network surveys of 41,033 Americans from 2020 to 2022, we found that the size and composition of core networks remained stable, though political homophily increased among non-kin relationships compared to previous surveys between 1985 and 2016. Critically, heightened remote communication during the initial phase of the pandemic was associated with increased interaction with the same partisans, though political homophily decreased during the later phase of the pandemic when in-person contacts increased. These results underscore the crucial role of social institutions and social gatherings in promoting spontaneous encounters with diverse political backgrounds.
△ Less
Submitted 17 November, 2023; v1 submitted 9 March, 2023;
originally announced March 2023.
-
Trap-limited electrical properties of organic semiconductor devices
Authors:
Donghyun Ko,
Gyuhyeon Lee,
Kyu-Myung Lee,
Yongsup Park,
Jaesang Lee
Abstract:
We investigated the electrical properties of a unipolar organic device with traps that were intentionally inserted into a particular position in the device. Depending on their inserted position, the traps significantly alter the charge distribution and the resulting electric field as well as the charge transport behavior in the device. In particular, as the traps are situated closer to a charge-in…
▽ More
We investigated the electrical properties of a unipolar organic device with traps that were intentionally inserted into a particular position in the device. Depending on their inserted position, the traps significantly alter the charge distribution and the resulting electric field as well as the charge transport behavior in the device. In particular, as the traps are situated closer to a charge-injection electrode, the band bending of a trap-containing organic layer occurs more strongly so that it effectively imposes a higher charge injection barrier. We propose an electrical model that fully accounts for the observed change in the electrical properties of the device with respect to the trap position.
△ Less
Submitted 19 February, 2023;
originally announced February 2023.
-
Machine Learning based tool for CMS RPC currents quality monitoring
Authors:
E. Shumka,
A. Samalan,
M. Tytgat,
M. El Sawy,
G. A. Alves,
F. Marujo,
E. A. Coelho,
E. M. Da Costa,
H. Nogima,
A. Santoro,
S. Fonseca De Souza,
D. De Jesus Damiao,
M. Thiel,
K. Mota Amarilo,
M. Barroso Ferreira Filho,
A. Aleksandrov,
R. Hadjiiska,
P. Iaydjiev,
M. Rodozov,
M. Shopova,
G. Soultanov,
A. Dimitrov,
L. Litov,
B. Pavlov,
P. Petkov
, et al. (83 additional authors not shown)
Abstract:
The muon system of the CERN Compact Muon Solenoid (CMS) experiment includes more than a thousand Resistive Plate Chambers (RPC). They are gaseous detectors operated in the hostile environment of the CMS underground cavern on the Large Hadron Collider where pp luminosities of up to $2\times 10^{34}$ $\text{cm}^{-2}\text{s}^{-1}$ are routinely achieved. The CMS RPC system performance is constantly m…
▽ More
The muon system of the CERN Compact Muon Solenoid (CMS) experiment includes more than a thousand Resistive Plate Chambers (RPC). They are gaseous detectors operated in the hostile environment of the CMS underground cavern on the Large Hadron Collider where pp luminosities of up to $2\times 10^{34}$ $\text{cm}^{-2}\text{s}^{-1}$ are routinely achieved. The CMS RPC system performance is constantly monitored and the detector is regularly maintained to ensure stable operation. The main monitorable characteristics are dark current, efficiency for muon detection, noise rate etc. Herein we describe an automated tool for CMS RPC current monitoring which uses Machine Learning techniques. We further elaborate on the dedicated generalized linear model proposed already and add autoencoder models for self-consistent predictions as well as hybrid models to allow for RPC current predictions in a distant future.
△ Less
Submitted 6 February, 2023;
originally announced February 2023.
-
Metal-Organic Chemical Vapor Deposition of PtSe2
Authors:
Maximilian Prechtl,
Marc Busch,
Oliver Hartwig,
Kangho Lee,
Tanja Stimpel-Lindner,
Cormac Ó Coileáin,
Kuanysh Zhussupbekov,
Ainur Zhussupbekova,
Samuel Berman,
Igor V. Shvets,
Georg S. Duesberg
Abstract:
Platinum diselenide (PtSe2), a novel two-dimensional material from the class of noble-metal dichalcogenide (NMD), has recently received significant attention due to its outstanding properties. PtSe2, which undergoes a semi metallic to semiconductor transition when thinned, offers a band-gap in the infrared range and good air stability. These properties make it a prime active material in optoelectr…
▽ More
Platinum diselenide (PtSe2), a novel two-dimensional material from the class of noble-metal dichalcogenide (NMD), has recently received significant attention due to its outstanding properties. PtSe2, which undergoes a semi metallic to semiconductor transition when thinned, offers a band-gap in the infrared range and good air stability. These properties make it a prime active material in optoelectronic and chemical sensing devices. However, a synthesis method that can produce large-scale and reliable high quality PtSe2 is highly sought after. Here, we present PtSe2 growth by metal organic chemical vapor deposition. Films were grown on a variety of centimeter scale substrates and were characterized by Raman, X-ray photoelectron and X-ray diffraction spectroscopy, as well as scanning tunneling microscopy and spectroscopy. Domains within the films are found to be up to several hundred nanometers in size, and atomic scale measurements show their highly ordered crystalline structure. The thickness of homogenous films can be controlled via the growth time. This work provides fundamental guidance for the synthesis and implementation of high quality, large-scale PtSe2 layers, hence offering the key requirement for the implementation of PtSe2 in future electronic devices.
△ Less
Submitted 2 February, 2023; v1 submitted 31 January, 2023;
originally announced January 2023.
-
A Data-Driven Framework for Designing Microstructure of Multifunctional Composites with Deep-Learned Diffusion-Based Generative Models
Authors:
Kang-Hyun Lee,
Hyoung Jun Lim,
Gun Jin Yun
Abstract:
This paper puts forward an integrated microstructure design methodology that replaces the common existing design approaches: 1) reconstruction of microstructures, 2) analyzing and quantifying material properties, and 3) inverse design of materials using deep-learned generative and surrogate models. The long-standing issue of microstructure reconstruction is well addressed in this study using a new…
▽ More
This paper puts forward an integrated microstructure design methodology that replaces the common existing design approaches: 1) reconstruction of microstructures, 2) analyzing and quantifying material properties, and 3) inverse design of materials using deep-learned generative and surrogate models. The long-standing issue of microstructure reconstruction is well addressed in this study using a new class of state-of-the-art generative model, the diffusion-based generative model (DGM). Moreover, the conditional formulation of DGM for guidance to the embedded desired material properties with a transformer-based attention mechanism enables the inverse design of multifunctional composites. A convolutional neural network (CNN)-based surrogate model is utilized to analyze the nonlinear material behavior to facilitate the prediction of material properties for building microstructure-property linkages. Combined, these generative and surrogate models enable large data processing and database construction that is often not affordable with resource-intensive finite element method (FEM)-based direct numerical simulation (DNS) and iterative reconstruction methods. An example case is presented to demonstrate the effectiveness of the proposed approach, which is designing mechanoluminescence (ML) particulate composites made of europium and dysprosium ions. The results show that the inversely-designed multiple ML microstructure candidates with the proposed generative and surrogate models meet the multiple design requirements (e.g., volume fraction, elastic constant, and light sensitivity). The evaluation of the generated samples' quality and the surrogate models' performance using appropriate metrics are also included. This assessment demonstrates that the proposed integrated methodology offers an end-to-end solution for practical material design applications.
△ Less
Submitted 14 July, 2023; v1 submitted 21 January, 2023;
originally announced January 2023.