Showing 1–50 of 496 results for author: Lee, C

Projected background and sensitivity of AMoRE-II

Authors: A. Agrawal, V. V. Alenkov, P. Aryal, J. Beyer, B. Bhandari, R. S. Boiko, K. Boonin, O. Buzanov, C. R. Byeon, N. Chanthima, M. K. Cheoun, J. S. Choe, Seonho Choi, S. Choudhury, J. S. Chung, F. A. Danevich, M. Djamal, D. Drung, C. Enss, A. Fleischmann, A. M. Gangapshev, L. Gastaldo, Y. M. Gavrilyuk, A. M. Gezhaev, O. Gileva , et al. (81 additional authors not shown)

Abstract: AMoRE-II aims to search for neutrinoless double beta decay with an array of 423 Li$_2$$^{100}$MoO$_4$ crystals operating in the cryogenic system as the main phase of the Advanced Molybdenum-based Rare process Experiment (AMoRE). AMoRE has been planned to operate in three phases: AMoRE-pilot, AMoRE-I, and AMoRE-II. AMoRE-II is currently being installed at the Yemi Underground Laboratory, located ap… ▽ More AMoRE-II aims to search for neutrinoless double beta decay with an array of 423 Li$_2$$^{100}$MoO$_4$ crystals operating in the cryogenic system as the main phase of the Advanced Molybdenum-based Rare process Experiment (AMoRE). AMoRE has been planned to operate in three phases: AMoRE-pilot, AMoRE-I, and AMoRE-II. AMoRE-II is currently being installed at the Yemi Underground Laboratory, located approximately 1000 meters deep in Jeongseon, Korea. The goal of AMoRE-II is to reach up to $T^{0νββ}_{1/2}$ $\sim$ 6 $\times$ 10$^{26}$ years, corresponding to an effective Majorana mass of 15 - 29 meV, covering all the inverted mass hierarchy regions. To achieve this, the background level of the experimental configurations and possible background sources of gamma and beta events should be well understood. We have intensively performed Monte Carlo simulations using the GEANT4 toolkit in all the experimental configurations with potential sources. We report the estimated background level that meets the 10$^{-4}$counts/(keV$\cdot$kg$\cdot$yr) requirement for AMoRE-II in the region of interest (ROI) and show the projected half-life sensitivity based on the simulation study. △ Less

Submitted 13 June, 2024; originally announced June 2024.

Observation of higher-order time-dislocation topological modes

Authors: Jia-Hui Zhang, Feng Mei, Yi Li, Ching Hua Lee, Jie Ma, Liantuan Xiao, Suotang Jia

Abstract: Topological dislocation modes resulting from the interplay between spatial dislocations and momentum-space topology have recently attracted significant interest. Here, we theoretically and experimentally demonstrate time-dislocation topological modes which are induced by the interplay between temporal dislocations and Floquet-band topology. By utilizing an extra physical dimension to represent the… ▽ More Topological dislocation modes resulting from the interplay between spatial dislocations and momentum-space topology have recently attracted significant interest. Here, we theoretically and experimentally demonstrate time-dislocation topological modes which are induced by the interplay between temporal dislocations and Floquet-band topology. By utilizing an extra physical dimension to represent the frequency-space lattice, we implement a two-dimensional Floquet higher-order topological phase and observe time-dislocation induced $π$-mode topological corner modes in a three-dimensional circuit metamaterial. Intriguingly, the realized time-dislocation topological modes exhibit spatial localization at the temporal dislocation, despite homogeneous in-plane lattice couplings across it. Our study opens a new avenue to explore the topological phenomena enabled by the interplay between real-space, time-space and momentum-space topology. △ Less

Submitted 7 June, 2024; originally announced June 2024.

Comments: 9 pages, 4 figures

Topological Materials for Near-Field Radiative Heat Transfer

Authors: Azadeh Didari-Bader, Seonyeong Kim, Heejin Choi, Sunae Seo, Piyali Biswas, Heejeong Jeong, Chang-Won Lee

Abstract: Topological materials provide a platform that utilizes the geometric characteristics of structured materials to control the flow of waves, enabling unidirectional and protected transmission that is immune to defects or impurities. The topologically designed photonic materials can carry quantum states and electromagnetic energy, benefiting nanolasers or quantum photonic systems. This article review… ▽ More Topological materials provide a platform that utilizes the geometric characteristics of structured materials to control the flow of waves, enabling unidirectional and protected transmission that is immune to defects or impurities. The topologically designed photonic materials can carry quantum states and electromagnetic energy, benefiting nanolasers or quantum photonic systems. This article reviews recent advances in the topological applications of photonic materials for radiative heat transfer, especially in the near field. When the separation distance between media is considerably smaller than the thermal wavelength, the heat transfer exhibits super-Planckian behavior that surpasses Planck's blackbody predictions. Near-field thermal radiation in subwavelength systems supporting surface modes has various applications, including nanoscale thermal management and energy conversion. Photonic materials and structures that support topological surface states show immense potential for enhancing or suppressing near-field thermal radiation. We present various topological effects, such as periodic and quasi-periodic nanoparticle arrays, Dirac and Weyl semimetal-based materials, structures with broken global symmetries, and other topological insulators, on near-field heat transfer. Also, the possibility of realizing near-field thermal radiation in such topological materials for alternative thermal management and heat flux guiding in nano-scale systems is discussed based on the existing technology. △ Less

Submitted 18 June, 2024; v1 submitted 6 June, 2024; originally announced June 2024.

Report number: in press Materials Today Physics, 2024

Journal ref: Materials Today Physics, 2024

Physical Origin of H-Mode

Authors: Kwan Chul Lee

Abstract: The high confinement mode (H-mode), the most important operation mode for the nuclear fusion reactor, has been studied for 42 years, but the transition mechanism has not been unanimously agreed so far. Four decades of H-mode experiments revealed many features of heating power threshold (Pth) for the low to high confinement (L-H) transition, where Pth is proportional to the toroidal magnetic field… ▽ More The high confinement mode (H-mode), the most important operation mode for the nuclear fusion reactor, has been studied for 42 years, but the transition mechanism has not been unanimously agreed so far. Four decades of H-mode experiments revealed many features of heating power threshold (Pth) for the low to high confinement (L-H) transition, where Pth is proportional to the toroidal magnetic field (B), inversely proportional to the ion mass (mi), and Pth has U-shaped dependence on the plasma density. It is found for the first time that this U-shaped rollover dependence came from Pth is inversely proportional to the multiplication of plasma density (ni) and the squire of neutral density (nn). The reason for the neutral density involved in the L-H transition is that the turbulence suppression takes place by the viscous force of the ion-neutral friction. When the plasma is in the equilibrium by the compensation of turbulence-induced return current to the gyro-center shift current generated by the ion-neutral charge exchanges, the Reynolds number (Re), the ratio of inertial force to the viscous force, can predict the onset of laminar to turbulent flow. Re for the plasma-neutral interaction is proportional to B / (mi nin^2n) which is well agreed with the experimental results of Pth. Re is also proportional to the second gradient of the radial electric field which is agreed with experiments. 15 characteristics of L-H transition are explained by Re including the feature of Pth having favorable dependence on the ion grad B drift toward the x-point. △ Less

Submitted 5 June, 2024; originally announced June 2024.

Impacting the dayside Martian ionosphere from above and below: Effects of the impact of CIRs and ICMEs close to aphelion (April 2021) and during dust storms (June-July 2022) seen with MAVEN ROSE

Authors: Marianna Felici, Jennifer Segale, Paul Withers, Christina O. Lee, Andrea Hughes, Ed Thiemann, Steve Bougher, Candace Grey, Shannon Curry

Abstract: We use 62 electron density profiles collected by the Radio Occultation Science Experiment (ROSE), on MAVEN, when Mars was hit by CIRs and ICMEs close to aphelion (April 2021) and during two dust storms (June-July 2022) to examine the response of the Martian ionosphere to solar events and to solar events hitting during dust storms. We do so through three proxies - variation in total electron conten… ▽ More We use 62 electron density profiles collected by the Radio Occultation Science Experiment (ROSE), on MAVEN, when Mars was hit by CIRs and ICMEs close to aphelion (April 2021) and during two dust storms (June-July 2022) to examine the response of the Martian ionosphere to solar events and to solar events hitting during dust storms. We do so through three proxies - variation in total electron content between 80 and 300 km altitude, peak density, and peak altitude - of the aforementioned 62 ROSE electron density profiles, relative to a characterisation of the ionosphere through solar minimum leading to solar maximum, specific to local time sector and season, presented in Segale et al., (COMPANION). We observe an increased Total Electron Content (TEC) between 80 and 300 km altitude up to 2.5 x 10(15) m(-2) in April 2021 and up to 5 x 10(15) m(-2) in June-July 2022 compared to the baseline photochemically produced ionosphere. This increase in TEC corresponds mainly to increases in the solar energetic particles flux (detected by MAVEN SEP) and electron fluxes (detected by MAVEN SWEA). In addition to solar events, in June-July 2022, an A storm and a B storm were occurring and merging on the surface of Mars. We observe a raise in peak altitude in general lower than expected during dust storms, possibly due to high values of solar wind dynamic pressure (derived from MAVEN SWIA). From 31 ROSE profiles collected in this time period that showed both the M2 and M1 layer, we observe that, on average, M1 and M2 peak altitudes raise the same amount, suggesting that the thermosphere might loft as a unit during dust storms. During this time period, several proton aurora events of variable brightness were detected with MAVEN IUVS underlining the complex and multifaceted impact of dust activity and extreme solar activity on the Martian ionosphere. △ Less

Submitted 23 April, 2024; originally announced April 2024.

Quantum plasmonic sensing by Hong-Ou-Mandel interferometry

Authors: Seungjin Yoon, Yu Sung Choi, Mark Tame, Jae Woong Yoon, Sergey V. Polyakov, Changhyoup Lee

Abstract: We propose a quantum plasmonic sensor using Hong-Ou-Mandel (HOM) interferometry that measures the refractive index of an analyte, embedded in a plasmonic beam splitter composed of a dual-Kretschmann configuration, which serves as a frustrated total internal reflection beamsplitter. The sensing performance of the HOM interferometry, combined with single-photon detectors, is evaluated through Fisher… ▽ More We propose a quantum plasmonic sensor using Hong-Ou-Mandel (HOM) interferometry that measures the refractive index of an analyte, embedded in a plasmonic beam splitter composed of a dual-Kretschmann configuration, which serves as a frustrated total internal reflection beamsplitter. The sensing performance of the HOM interferometry, combined with single-photon detectors, is evaluated through Fisher information for estimation of the refractive index of the analyte. This is subsequently compared with the classical benchmark that considers the injection of a coherent state of light into the plasmonic beamsplitter. By varying the wavelength of the single photons and the refractive index of the analyte, we identify a wide range where a 50 % quantum enhancement is achieved and discuss the observed behaviors in comparison with the classical benchmark. We expect this study to provide a useful insight into the advancement of quantum-enhanced sensing technologies, with direct implications for a wide range of nanophotonic beamsplitter structures. △ Less

Submitted 23 April, 2024; v1 submitted 16 April, 2024; originally announced April 2024.

Automatic Quantification of Serial PET/CT Images for Pediatric Hodgkin Lymphoma Patients Using a Longitudinally-Aware Segmentation Network

Authors: Xin Tie, Muheon Shin, Changhee Lee, Scott B. Perlman, Zachary Huemann, Amy J. Weisman, Sharon M. Castellino, Kara M. Kelly, Kathleen M. McCarten, Adina L. Alazraki, Junjie Hu, Steve Y. Cho, Tyler J. Bradshaw

Abstract: $\textbf{Purpose}$: Automatic quantification of longitudinal changes in PET scans for lymphoma patients has proven challenging, as residual disease in interim-therapy scans is often subtle and difficult to detect. Our goal was to develop a longitudinally-aware segmentation network (LAS-Net) that can quantify serial PET/CT images for pediatric Hodgkin lymphoma patients. $\textbf{Materials and Metho… ▽ More $\textbf{Purpose}$: Automatic quantification of longitudinal changes in PET scans for lymphoma patients has proven challenging, as residual disease in interim-therapy scans is often subtle and difficult to detect. Our goal was to develop a longitudinally-aware segmentation network (LAS-Net) that can quantify serial PET/CT images for pediatric Hodgkin lymphoma patients. $\textbf{Materials and Methods}$: This retrospective study included baseline (PET1) and interim (PET2) PET/CT images from 297 patients enrolled in two Children's Oncology Group clinical trials (AHOD1331 and AHOD0831). LAS-Net incorporates longitudinal cross-attention, allowing relevant features from PET1 to inform the analysis of PET2. Model performance was evaluated using Dice coefficients for PET1 and detection F1 scores for PET2. Additionally, we extracted and compared quantitative PET metrics, including metabolic tumor volume (MTV) and total lesion glycolysis (TLG) in PET1, as well as qPET and $Δ$SUVmax in PET2, against physician measurements. We quantified their agreement using Spearman's $ρ$ correlations and employed bootstrap resampling for statistical analysis. $\textbf{Results}$: LAS-Net detected residual lymphoma in PET2 with an F1 score of 0.606 (precision/recall: 0.615/0.600), outperforming all comparator methods (P<0.01). For baseline segmentation, LAS-Net achieved a mean Dice score of 0.772. In PET quantification, LAS-Net's measurements of qPET, $Δ$SUVmax, MTV and TLG were strongly correlated with physician measurements, with Spearman's $ρ$ of 0.78, 0.80, 0.93 and 0.96, respectively. The performance remained high, with a slight decrease, in an external testing cohort. $\textbf{Conclusion}$: LAS-Net achieved high performance in quantifying PET metrics across serial scans, highlighting the value of longitudinal awareness in evaluating multi-time-point imaging datasets. △ Less

Submitted 12 April, 2024; originally announced April 2024.

Comments: 6 figures, 4 tables in the main text

Infrared nanosensors of pico- to micro-newton forces

Authors: Natalie Fardian-Melamed, Artiom Skripka, Changhwan Lee, Benedikt Ursprung, Thomas P. Darlington, Ayelet Teitelboim, Xiao Qi, Maoji Wang, Jordan M. Gerton, Bruce E. Cohen, Emory M. Chan, P. James Schuck

Abstract: Mechanical force is an essential feature for many physical and biological processes.1-12 Remote measurement of mechanical signals with high sensitivity and spatial resolution is needed for diverse applications, including robotics,13 biophysics,14-20 energy storage,21-24 and medicine.25-27 Nanoscale luminescent force sensors excel at measuring piconewton forces,28-32 while larger sensors have prove… ▽ More Mechanical force is an essential feature for many physical and biological processes.1-12 Remote measurement of mechanical signals with high sensitivity and spatial resolution is needed for diverse applications, including robotics,13 biophysics,14-20 energy storage,21-24 and medicine.25-27 Nanoscale luminescent force sensors excel at measuring piconewton forces,28-32 while larger sensors have proven powerful in probing micronewton forces.33,34 However, large gaps remain in the force magnitudes that can be probed remotely from subsurface or interfacial sites, and no individual, non-invasive sensor is capable of measuring over the large dynamic range needed to understand many systems.35,36 Here, we demonstrate Tm3+-doped avalanching nanoparticle37 force sensors that can be addressed remotely by deeply penetrating near-infrared (NIR) light and can detect piconewton to micronewton forces with a dynamic range spanning more than four orders of magnitude. Using atomic force microscopy coupled with single-nanoparticle optical spectroscopy, we characterize the mechanical sensitivity of the photon avalanching process and reveal its exceptional force responsiveness. By manipulating the Tm3+ concentrations and energy transfer within the nanosensors, we demonstrate different optical force-sensing modalities, including mechanobrightening and mechanochromism. The adaptability of these nanoscale optical force sensors, along with their multiscale sensing capability, enable operation in the dynamic and versatile environments present in real-world, complex structures spanning biological organisms to nanoelectromechanical systems (NEMS). △ Less

Submitted 2 April, 2024; originally announced April 2024.

Dynamic Phase Enabled Topological Mode Steering in Composite Su-Schrieffer-Heeger Waveguide Arrays

Authors: Min Tang, Chi Pang, Christian N. Saggau, Haiyun Dong, Ching Hua Lee, Ronny Thomale, Sebastian Klembt, Ion Cosma Fulga, Jeroen Van Den Brink, Yana Vaynzof, Oliver G. Schmidt, Jiawei Wang, Libo Ma

Abstract: Topological boundary states localize at interfaces whenever the interface implies a change of the associated topological invariant encoded in the geometric phase. The generically present dynamic phase, however, which is energy and time dependent, has been known to be non-universal, and hence not to intertwine with any topological geometric phase. Using the example of topological zero modes in comp… ▽ More Topological boundary states localize at interfaces whenever the interface implies a change of the associated topological invariant encoded in the geometric phase. The generically present dynamic phase, however, which is energy and time dependent, has been known to be non-universal, and hence not to intertwine with any topological geometric phase. Using the example of topological zero modes in composite Su-Schrieffer-Heeger (c-SSH) waveguide arrays with a central defect, we report on the selective excitation and transition of topological boundary mode based on dynamic phase-steered interferences. Our work thus provides a new knob for the control and manipulation of topological states in composite photonic devices, indicating promising applications where topological modes and their bandwidth can be jointly controlled by the dynamic phase, geometric phase, and wavelength in on-chip topological devices. △ Less

Submitted 28 March, 2024; originally announced March 2024.

NuGraph2: A Graph Neural Network for Neutrino Physics Event Reconstruction

Authors: V Hewes, Adam Aurisano, Giuseppe Cerati, Jim Kowalkowski, Claire Lee, Wei-keng Liao, Daniel Grzenda, Kaushal Gumpula, Xiaohe Zhang

Abstract: Liquid Argon Time Projection Chamber (LArTPC) detector technology offers a wealth of high-resolution information on particle interactions, and leveraging that information to its full potential requires sophisticated automated reconstruction techniques. This article describes NuGraph2, a Graph Neural Network (GNN) for low-level reconstruction of simulated neutrino interactions in a LArTPC detector.… ▽ More Liquid Argon Time Projection Chamber (LArTPC) detector technology offers a wealth of high-resolution information on particle interactions, and leveraging that information to its full potential requires sophisticated automated reconstruction techniques. This article describes NuGraph2, a Graph Neural Network (GNN) for low-level reconstruction of simulated neutrino interactions in a LArTPC detector. Simulated neutrino interactions in the MicroBooNE detector geometry are described as heterogeneous graphs, with energy depositions on each detector plane forming nodes on planar subgraphs. The network utilizes a multi-head attention message-passing mechanism to perform background filtering and semantic labelling on these graph nodes, identifying those associated with the primary physics interaction with 98.0\% efficiency and labelling them according to particle type with 94.9\% efficiency. The network operates directly on detector observables across multiple 2D representations, but utilizes a 3D-context-aware mechanism to encourage consistency between these representations. Model inference takes 0.12 s/event on a CPU, and 0.005 s/event batched on a GPU. This architecture is designed to be a general-purpose solution for particle reconstruction in neutrino physics, with the potential for deployment across a broad range of detector technologies, and offers a core convolution engine that can be leveraged for a variety of tasks beyond the two described in this article. △ Less

Submitted 18 March, 2024; originally announced March 2024.

Comments: 18 pages, 14 figures, submitted to Physical Review D

Beneath the Surface: Revealing Deep-Tissue Blood Flow in Human Subjects with Massively Parallelized Diffuse Correlation Spectroscopy

Authors: Lucas Kreiss, Melissa Wu, Michael Wayne, Shiqi Xu, Paul McKee, Derrick Dwamena, Kanghyun Kim, Kyung Chul Lee, Wenhui Liu, Aarin Ulku, Mark Harfouche, Xi Yang, Clare Cook, Amey Chaware, Seung Ah Lee, Erin Buckley, Claudio Bruschini, Edoardo Charbon, Scott Huettel, Roarke Horstmeyer

Abstract: Diffuse Correlation Spectroscopy (DCS) allows the label-free investigation of microvascular dynamics deep within living tissue. However, common implementations of DCS are currently limited to measurement depths of $\sim 1-1.5cm$, which can limit the accuracy of cerebral hemodynamics measurement. Here we present massively parallelized DCS (pDCS) using novel single photon avalanche detector (SPAD) a… ▽ More Diffuse Correlation Spectroscopy (DCS) allows the label-free investigation of microvascular dynamics deep within living tissue. However, common implementations of DCS are currently limited to measurement depths of $\sim 1-1.5cm$, which can limit the accuracy of cerebral hemodynamics measurement. Here we present massively parallelized DCS (pDCS) using novel single photon avalanche detector (SPAD) arrays with up to 500x500 individual channels. The new SPAD array technology can boost the signal-to-noise ratio by a factor of up to 500 compared to single-pixel DCS, or by more than 15-fold compared to the most recent state-of-the-art pDCS demonstrations. Our results demonstrate the first in vivo use of this massively parallelized DCS system to measure cerebral blood flow changes at $\sim 2cm$ depth in human adults. We compared different modes of operation and applied a dual detection strategy, where a secondary SPAD array is used to simultaneously assess the superficial blood flow as a built-in reference measurement. While the blood flow in the superficial scalp tissue showed no significant change during cognitive activation, the deep pDCS measurement showed a statistically significant increase in the derived blood flow index of 8-12% when compared to the control rest state. △ Less

Submitted 25 June, 2024; v1 submitted 6 March, 2024; originally announced March 2024.

Performance of a modular ton-scale pixel-readout liquid argon time projection chamber

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, B. Aimard, F. Akbar, K. Allison, S. Alonso Monsalve, M. Alrashed, A. Alton, R. Alvarez, T. Alves, H. Amar, P. Amedo, J. Anderson, D. A. Andrade , et al. (1340 additional authors not shown)

Abstract: The Module-0 Demonstrator is a single-phase 600 kg liquid argon time projection chamber operated as a prototype for the DUNE liquid argon near detector. Based on the ArgonCube design concept, Module-0 features a novel 80k-channel pixelated charge readout and advanced high-coverage photon detection system. In this paper, we present an analysis of an eight-day data set consisting of 25 million cosmi… ▽ More The Module-0 Demonstrator is a single-phase 600 kg liquid argon time projection chamber operated as a prototype for the DUNE liquid argon near detector. Based on the ArgonCube design concept, Module-0 features a novel 80k-channel pixelated charge readout and advanced high-coverage photon detection system. In this paper, we present an analysis of an eight-day data set consisting of 25 million cosmic ray events collected in the spring of 2021. We use this sample to demonstrate the imaging performance of the charge and light readout systems as well as the signal correlations between the two. We also report argon purity and detector uniformity measurements, and provide comparisons to detector simulations. △ Less

Submitted 5 March, 2024; originally announced March 2024.

Comments: 47 pages, 41 figures

Report number: FERMILAB-PUB-24-0073-LBNF

100 Gbps Indoor Access and 4.8 Gbps Outdoor Point-to-Point LiFi Transmission Systems using Laser-based Light Sources

Authors: Cheng Cheng, Sovan Das, Stefan Videv, Adrian Spark, Sina Babadi, Aravindh Krishnamoorthy, Changmin Lee, Daniel Grieder, Kathleen Hartnett, Paul Rudy, James Raring, Marzieh Najafi, Vasilis K. Papanikolaou, Robert Schober, Harald Haas

Abstract: In this paper, we demonstrate the communication capabilities of light-fidelity (LiFi) systems based on highbrightness and high-bandwidth integrated laser-based sources in a surface mount device (SMD) packaging platform. The laserbased source is able to deliver 450 lumens of white light illumination and the resultant light brightness is over 1000 cd mm2. It is demonstrated that a wavelength divisio… ▽ More In this paper, we demonstrate the communication capabilities of light-fidelity (LiFi) systems based on highbrightness and high-bandwidth integrated laser-based sources in a surface mount device (SMD) packaging platform. The laserbased source is able to deliver 450 lumens of white light illumination and the resultant light brightness is over 1000 cd mm2. It is demonstrated that a wavelength division multiplexing (WDM) LiFi system with ten parallel channels is able to deliver over 100 Gbps data rate with the assistance of Volterra filter-based nonlinear equalisers. In addition, an aggregated transmission data rate of 4.8 Gbps has been achieved over a link distance of 500 m with the same type of SMD light source. This work demonstrates the scalability of LiFi systems that employ laserbased light sources, particularly in their capacity to enable highspeed short range, as well as long-range data transmission. △ Less

Submitted 25 February, 2024; originally announced February 2024.

Correlating parent-fragment relationships in cluster photoionization

Authors: Jong Chan Lee, Begüm Rukiye Özer, In Heo, Thomas Schultz

Abstract: Fragment signals in ordinary mass spectra carry no label to identify their parent molecule. By correlating mass signals with rotational Raman spectra, we created a method to label each ion signal with the spectroscopic fingerprint of its neutral parent molecule. In data for a carbon disulfide molecular cluster beam, we assigned 28 distinct ionization and fragmentation channels based on their mass-… ▽ More Fragment signals in ordinary mass spectra carry no label to identify their parent molecule. By correlating mass signals with rotational Raman spectra, we created a method to label each ion signal with the spectroscopic fingerprint of its neutral parent molecule. In data for a carbon disulfide molecular cluster beam, we assigned 28 distinct ionization and fragmentation channels based on their mass-correlated rotational fingerprints. Unexpected observations included the formation of energetic S2 and SCCS cationic fragments from the CS2-dimer cluster and a significant CS3 signal, uncorrelated to the dimer. The large number of observed channels revealed a surprising complexity that could only be addressed with correlated spectroscopy and computer-aided correlation analysis. △ Less

Submitted 13 February, 2024; originally announced February 2024.

Comments: 8 pages, 3 figures, 1 table

Doping Liquid Argon with Xenon in ProtoDUNE Single-Phase: Effects on Scintillation Light

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, B. Aimard, F. Akbar, K. Allison, S. Alonso Monsalve, M. Alrashed, A. Alton, R. Alvarez, H. Amar Es-sghir, P. Amedo, J. Anderson, D. A. Andrade, C. Andreopoulos , et al. (1300 additional authors not shown)

Abstract: Doping of liquid argon TPCs (LArTPCs) with a small concentration of xenon is a technique for light-shifting and facilitates the detection of the liquid argon scintillation light. In this paper, we present the results of the first doping test ever performed in a kiloton-scale LArTPC. From February to May 2020, we carried out this special run in the single-phase DUNE Far Detector prototype (ProtoDUN… ▽ More Doping of liquid argon TPCs (LArTPCs) with a small concentration of xenon is a technique for light-shifting and facilitates the detection of the liquid argon scintillation light. In this paper, we present the results of the first doping test ever performed in a kiloton-scale LArTPC. From February to May 2020, we carried out this special run in the single-phase DUNE Far Detector prototype (ProtoDUNE-SP) at CERN, featuring 770 t of total liquid argon mass with 410 t of fiducial mass. The goal of the run was to measure the light and charge response of the detector to the addition of xenon, up to a concentration of 18.8 ppm. The main purpose was to test the possibility for reduction of non-uniformities in light collection, caused by deployment of photon detectors only within the anode planes. Light collection was analysed as a function of the xenon concentration, by using the pre-existing photon detection system (PDS) of ProtoDUNE-SP and an additional smaller set-up installed specifically for this run. In this paper we first summarize our current understanding of the argon-xenon energy transfer process and the impact of the presence of nitrogen in argon with and without xenon dopant. We then describe the key elements of ProtoDUNE-SP and the injection method deployed. Two dedicated photon detectors were able to collect the light produced by xenon and the total light. The ratio of these components was measured to be about 0.65 as 18.8 ppm of xenon were injected. We performed studies of the collection efficiency as a function of the distance between tracks and light detectors, demonstrating enhanced uniformity of response for the anode-mounted PDS. We also show that xenon doping can substantially recover light losses due to contamination of the liquid argon by nitrogen. △ Less

Submitted 9 February, 2024; v1 submitted 2 February, 2024; originally announced February 2024.

Comments: 35 pages, 20 figures

Report number: CERN-EP-2024-024; FERMILAB-PUB-23-0819-LBNF

A new universality class describes Vicsek's flocking phase in physical dimensions

Authors: Patrick Jentsch, Chiu Fan Lee

Abstract: The Vicsek simulation model of flocking together with its theoretical treatment by Toner and Tu in 1995 were two foundational cornerstones of active matter physics. However, despite the field's tremendous progress, the actual universality class (UC) governing the scaling behavior of Viscek's "flocking" phase remains elusive. Here, we use nonperturbative, functional renormalization group methods to… ▽ More The Vicsek simulation model of flocking together with its theoretical treatment by Toner and Tu in 1995 were two foundational cornerstones of active matter physics. However, despite the field's tremendous progress, the actual universality class (UC) governing the scaling behavior of Viscek's "flocking" phase remains elusive. Here, we use nonperturbative, functional renormalization group methods to analyze, numerically and analytically, a simplified version of the Toner-Tu model, and uncover a novel UC with scaling exponents that agree remarkably well with the values obtained in a recent simulation study by Mahault et al. [Phys. Rev. Lett. 123, 218001 (2019)], in both two and three spatial dimensions. We therefore believe that there is strong evidence that the UC uncovered here describes Vicsek's flocking phase. △ Less

Submitted 2 February, 2024; originally announced February 2024.

Comments: Main text: 6 pages, 2 figures Supplemental Material: 12 pages, 3 figures

Climate Trends of Tropical Cyclone Intensity and Energy Extremes Revealed by Deep Learning

Authors: Buo-Fu Chen, Boyo Chen, Chun-Min Hsiao, Hsu-Feng Teng, Cheng-Shang Lee, Hung-Chi Kuo

Abstract: Anthropogenic influences have been linked to tropical cyclone (TC) poleward migration, TC extreme precipitation, and an increased proportion of major hurricanes [1, 2, 3, 4]. Understanding past TC trends and variability is critical for projecting future TC impacts on human society considering the changing climate [5]. However, past trends of TC structure/energy remain uncertain due to limited obse… ▽ More Anthropogenic influences have been linked to tropical cyclone (TC) poleward migration, TC extreme precipitation, and an increased proportion of major hurricanes [1, 2, 3, 4]. Understanding past TC trends and variability is critical for projecting future TC impacts on human society considering the changing climate [5]. However, past trends of TC structure/energy remain uncertain due to limited observations; subjective-analyzed and spatiotemporal-heterogeneous "best-track" datasets lead to reduced confidence in the assessed TC repose to climate change [6, 7]. Here, we use deep learning to reconstruct past "observations" and yield an objective global TC wind profile dataset during 1981 to 2020, facilitating a comprehensive examination of TC structure/energy. By training with uniquely labeled data integrating best tracks and numerical model analysis of 2004 to 2018 TCs, our model converts multichannel satellite imagery to a 0-750-km wind profile of axisymmetric surface winds. The model performance is verified to be sufficient for climate studies by comparing it to independent satellite-radar surface winds. Based on the new homogenized dataset, the major TC proportion has increased by ~13% in the past four decades. Moreover, the proportion of extremely high-energy TCs has increased by ~25%, along with an increasing trend (> one standard deviation of the 40-y variability) of the mean total energy of high-energy TCs. Although the warming ocean favors TC intensification, the TC track migration to higher latitudes and altered environments further affect TC structure/energy. This new deep learning method/dataset reveals novel trends regarding TC structure extremes and may help verify simulations/studies regarding TCs in the changing climate. △ Less

Submitted 1 February, 2024; originally announced February 2024.

Comments: 41 pages

Light-enhanced nonlinear Hall effect

Authors: Fang Qin, Rui Chen, Ching Hua Lee

Abstract: It is well known that a nontrivial Chern number results in quantized Hall conductance. What is less known is that, generically, the Hall response can be dramatically different from its quantized value in materials with broken inversion symmetry. This stems from the leading Hall contribution beyond the linear order, known as the Berry curvature dipole (BCD). While the BCD is in principle always pre… ▽ More It is well known that a nontrivial Chern number results in quantized Hall conductance. What is less known is that, generically, the Hall response can be dramatically different from its quantized value in materials with broken inversion symmetry. This stems from the leading Hall contribution beyond the linear order, known as the Berry curvature dipole (BCD). While the BCD is in principle always present, it is typically very small outside of a narrow window close to a topological transition and is thus experimentally elusive without careful tuning of external fields, temperature, or impurities. In this work, we transcend this challenge by devising optical driving and quench protocols that enable practical and direct access to large BCD and nonlinear Hall responses. Varying the amplitude of an incident circularly polarized laser drives a topological transition between normal and Chern insulator phases, and importantly allows the precise unlocking of nonlinear Hall currents comparable to or larger than the linear Hall contributions. This strong BCD engineering is even more versatile with our two-parameter quench protocol, as demonstrated in our experimental proposal. Our predictions are expected to hold qualitatively across a broad range of Hall materials, thereby paving the way for the controlled engineering of nonlinear electronic properties in diverse media. △ Less

Submitted 6 February, 2024; v1 submitted 31 January, 2024; originally announced January 2024.

Comments: 23 pages, 8 figures

Towards predicting shear-banding instabilities in lipid monolayers

Authors: A. R. Carotenuto, A. Gaffney, K. Y. C. Lee, L. Pocivavsek, M. Fraldi, L. Deseri

Abstract: Langmuir monolayers are advantageous systems used to investigate how lipid membranes get involved in the physiology of many living structures, such as collapse phenomena in alveolar structures. Much work focuses on characterizing the pressure-bearing capacity of Langmuir films, expressed in the form of isotherm curves. These show that monolayers experience different phases during compression with… ▽ More Langmuir monolayers are advantageous systems used to investigate how lipid membranes get involved in the physiology of many living structures, such as collapse phenomena in alveolar structures. Much work focuses on characterizing the pressure-bearing capacity of Langmuir films, expressed in the form of isotherm curves. These show that monolayers experience different phases during compression with an according evolution of their mechanical response, incurring into instability events when a critical stress threshold is overcome. Although well-known state equations, which establish an inverse relationship between surface pressure and area change, are able to describe monolayer behavior during liquid expanded phase, the modelling of their nonlinear behavior in the subsequent condensed region is still an open issue. In this regard, efforts are addressed to explain out-of-plane collapse by modeling buckling and wrinkling mainly resorting to linearly elastic plate theory. However, some experiments on Langmuir monolayers also show in-plane instability phenomena leading to the formation of the so-called shear bands and, to date, no theoretical description of the onset of shear banding bifurcation in monolayers has been yet provided. For this reason, by adopting a macroscopic description, we here study material stability of the monolayers and exploit an incremental approach to find the conditions that kindle shear bands. By starting from the widely assumed hypothesis that monolayers behave elastically in the solid-like region, a hyperfoam hyperelastic potential is introduced as a new constitutive strategy to trace back the nonlinear response of monolayer response during densification. In this way, the obtained mechanical properties together with the adopted strain energy are successfully employed to reproduce the onset of shear banding exhibited by some lipid systems under different conditions. △ Less

Submitted 19 January, 2024; originally announced January 2024.

Journal ref: J Mech Behav Biomed Mater, 141, 105743 (2023)

Optimal multiple-phase estimation with multi-mode NOON states against photon loss

Authors: Min Namkung, Dong-Hyun Kim, Seongjin Hong, Yong-Su Kim, Changhyoup Lee, Hyang-Tag Lim

Abstract: Multi-mode NOON states can quantum-enhance multiple-phase estimation in the absence of photon loss. However, a multi-mode NOON state is known to be vulnerable to photon loss, and its quantum-enhancement can be dissipated by lossy environment. In this work, we demonstrate that a quantum advantage in estimate precision can still be achieved in the presence of photon loss. This is accomplished by opt… ▽ More Multi-mode NOON states can quantum-enhance multiple-phase estimation in the absence of photon loss. However, a multi-mode NOON state is known to be vulnerable to photon loss, and its quantum-enhancement can be dissipated by lossy environment. In this work, we demonstrate that a quantum advantage in estimate precision can still be achieved in the presence of photon loss. This is accomplished by optimizing the weights of the multi-mode NOON states according to photon loss rates in the multiple modes, including the reference mode which defines the other phases. For practical relevance, we also show that photon-number counting via a multi-mode beam-splitter achieves the useful, albeit sub-optimal, quantum advantage. We expect this work to provide valuable guidance for developing quantum-enhanced multiple-phase estimation techniques in lossy environments. △ Less

Submitted 18 January, 2024; originally announced January 2024.

Comments: 9 pages, 6 figures

Improved modelling of SEP event onset within the WSA-Enlil-SEPMOD framework

Authors: Erika Palmerio, Janet G. Luhmann, M. Leila Mays, Ronald M. Caplan, David Lario, Ian G. Richardson, Kathryn Whitman, Christina O. Lee, Beatriz Sánchez-Cano, Nicolas Wijsen, Yan Li, Carlota Cardoso, Marco Pinto, Daniel Heyner, Daniel Schmid, Hans-Ulrich Auster, David Fischer

Abstract: Multi-spacecraft observations of solar energetic particle (SEP) events not only enable a deeper understanding and development of particle acceleration and transport theories, but also provide important constraints for model validation efforts. However, because of computational limitations, a given physics-based SEP model is usually best-suited to capture a particular phase of an SEP event, rather… ▽ More Multi-spacecraft observations of solar energetic particle (SEP) events not only enable a deeper understanding and development of particle acceleration and transport theories, but also provide important constraints for model validation efforts. However, because of computational limitations, a given physics-based SEP model is usually best-suited to capture a particular phase of an SEP event, rather than its whole development from onset through decay. For example, magnetohydrodynamic (MHD) models of the heliosphere often incorporate solar transients only at the outer boundary of their so-called coronal domain -- usually set at a heliocentric distance of 20-30 $R_{\odot}$. This means that particle acceleration at CME-driven shocks is also computed from this boundary onwards, leading to simulated SEP event onsets that can be many hours later than observed, since shock waves can form much lower in the solar corona. In this work, we aim to improve the modelled onset of SEP events by inserting a "fixed source" of particle injection at the outer boundary of the coronal domain of the coupled WSA-Enlil 3D MHD model of the heliosphere. The SEP model that we employ for this effort is SEPMOD, a physics-based test-particle code based on a field line tracer and adiabatic invariant conservation. We apply our initial tests and results of SEPMOD's fixed-source option to the 2021 October 9 SEP event, which was detected at five well-separated locations in the inner heliosphere -- Parker Solar Probe, STEREO-A, Solar Orbiter, BepiColombo, and near-Earth spacecraft. △ Less

Submitted 10 January, 2024; originally announced January 2024.

Comments: 31 pages, 8 figures, 4 tables, accepted for publication in Journal of Space Weather and Space Climate

Jovian electrons in the inner heliosphere: Opportunities for Multi-spacecraft Observations and Modeling

Authors: R. D. Strauss, N. Dresing, N. E. Engelbrecht, J. G. Mitchell, P. Kühl, S. Jensen, S. Fleth, B. Sánchez-Cano, A. Posner, J. S Rankin, C. O. Lee, J. P. van den Berg, S. E. S. Ferreira, B. Heber

Abstract: In this paper we explore the idea of using multi-spacecraft observations of Jovian electrons to measure the 3D distribution of these particles in the inner heliosphere. We present simulations of Jovian electron intensities along selected spacecraft trajectories for 2021 and compare these, admittedly qualitatively, to these measurements. Using the data-model comparison we emphasize how such a study… ▽ More In this paper we explore the idea of using multi-spacecraft observations of Jovian electrons to measure the 3D distribution of these particles in the inner heliosphere. We present simulations of Jovian electron intensities along selected spacecraft trajectories for 2021 and compare these, admittedly qualitatively, to these measurements. Using the data-model comparison we emphasize how such a study can be used to constrain the transport parameters in the inner heliosphere, and how this can lead to additional insight into energetic particle transport. Model results are also shown along the expected trajectories of selected spacecraft, including the off-ecliptic phase of the Solar Orbiter mission from 2025 onward. Lastly, we revisit the use of historical data and discuss upcoming missions that may contribute to Jovian electron measurements. △ Less

Submitted 6 December, 2023; originally announced January 2024.

Comments: Accepted for publication in ApJ

On the Mesoscale Structure of CMEs at Mercury's Orbit: BepiColombo and Parker Solar Probe Observations

Authors: Erika Palmerio, Fernando Carcaboso, Leng Ying Khoo, Tarik M. Salman, Beatriz Sánchez-Cano, Benjamin J. Lynch, Yeimy J. Rivera, Sanchita Pal, Teresa Nieves-Chinchilla, Andreas J. Weiss, David Lario, Johannes Z. D. Mieth, Daniel Heyner, Michael L. Stevens, Orlando M. Romeo, Andrei N. Zhukov, Luciano Rodriguez, Christina O. Lee, Christina M. S. Cohen, Laura Rodríguez-García, Phyllis L. Whittlesey, Nina Dresing, Philipp Oleynik, Immanuel C. Jebaraj, David Fischer , et al. (5 additional authors not shown)

Abstract: On 2022 February 15, an impressive filament eruption was observed off the solar eastern limb from three remote-sensing viewpoints, namely Earth, STEREO-A, and Solar Orbiter. In addition to representing the most-distant observed filament at extreme ultraviolet wavelengths -- captured by Solar Orbiter's field of view extending to above 6 $R_{\odot}$ -- this event was also associated with the release… ▽ More On 2022 February 15, an impressive filament eruption was observed off the solar eastern limb from three remote-sensing viewpoints, namely Earth, STEREO-A, and Solar Orbiter. In addition to representing the most-distant observed filament at extreme ultraviolet wavelengths -- captured by Solar Orbiter's field of view extending to above 6 $R_{\odot}$ -- this event was also associated with the release of a fast ($\sim$2200 km$\cdot$s$^{-1}$) coronal mass ejection (CME) that was directed towards BepiColombo and Parker Solar Probe. These two probes were separated by 2$^{\circ}$ in latitude, 4$^{\circ}$ in longitude, and 0.03 au in radial distance around the time of the CME-driven shock arrival in situ. The relative proximity of the two probes to each other and to the Sun ($\sim$0.35 au) allows us to study the mesoscale structure of CMEs at Mercury's orbit for the first time. We analyse similarities and differences in the main CME-related structures measured at the two locations, namely the interplanetary shock, the sheath region, and the magnetic ejecta. We find that, despite the separation between the two spacecraft being well within the typical uncertainties associated with determination of CME geometric parameters from remote-sensing observations, the two sets of in-situ measurements display some profound differences that make understanding of the overall 3D CME structure particularly challenging. Finally, we discuss our findings within the context of space weather at Mercury's distances and in terms of the need to investigate solar transients via spacecraft constellations with small separations, which has been gaining significant attention during recent years. △ Less

Submitted 3 January, 2024; originally announced January 2024.

Comments: 31 pages, 13 figures, 5 tables, accepted for publication in The Astrophysical Journal

TPTNet: A Data-Driven Temperature Prediction Model Based on Turbulent Potential Temperature

Authors: Jun Park, Changhoon Lee

Abstract: A data-driven model for predicting the surface temperature using neural networks was proposed to alleviate the computational burden of numerical weather prediction (NWP). Our model, named TPTNet uses only 2m temperature measured at the weather stations of the South Korean Peninsula as input to predict the local temperature at finite forecast hours. The turbulent fluctuation component of the temper… ▽ More A data-driven model for predicting the surface temperature using neural networks was proposed to alleviate the computational burden of numerical weather prediction (NWP). Our model, named TPTNet uses only 2m temperature measured at the weather stations of the South Korean Peninsula as input to predict the local temperature at finite forecast hours. The turbulent fluctuation component of the temperature was extracted from the station measurements by separating the climatology component accounting for the yearly and daily variations. The effect of station altitude was then compensated by introducing a potential temperature. The resulting turbulent potential temperature data at irregularly distributed stations were used as input for predicting the turbulent potential temperature at forecast hours through three trained networks based on convolutional neural network (CNN), Swin Transformer, and a graphic neural network (GNN). The prediction performance of our network was compared with that of persistence and NWP, confirming that our model outperformed NWP for up to 12 forecast hours. △ Less

Submitted 21 December, 2023; originally announced December 2023.

Inverse design of coherent supercontinuum generation using free-form nanophotonic waveguides

Authors: Chia-Yi Lee, Yanwu Liu, Yinke Cheng, Cheng-Hao Lao, Qihuang Gong, Qi-Fan Yang

Abstract: Many key functionalities of optical frequency combs such as self-referencing and broad spectral access rely on coherent supercontinuum generation (SCG). While nanophotonic waveguides have emerged as a compact and power-efficient platform for SCG, their geometric degrees of freedom have not been fully utilized due to the underlying nonlinear and stochastic physics. Here, we introduce inverse design… ▽ More Many key functionalities of optical frequency combs such as self-referencing and broad spectral access rely on coherent supercontinuum generation (SCG). While nanophotonic waveguides have emerged as a compact and power-efficient platform for SCG, their geometric degrees of freedom have not been fully utilized due to the underlying nonlinear and stochastic physics. Here, we introduce inverse design to unlock free-form waveguides for coherent SCG. The efficacy of our design is numerically and experimentally demonstrated on Si3N4 waveguides, producing flat and coherent spectra from visible to mid-infrared wavelengths. Our work has direct applications in developing chip-based broadband light sources for spectroscopy, metrology, and sensing across multiple spectral regimes. △ Less

Submitted 17 December, 2023; originally announced December 2023.

Purcell enhanced emission and saturable absorption of cavity-coupled CsPbBr$_3$ quantum dots

Authors: Purbita Purkayastha, Shaun Gallagher, Yuxi Jiang, Chang-Min Lee, Gillian Shen, David Ginger, Edo Waks

Abstract: Halide perovskite semiconductors have emerged as promising materials for the development of solution-processed, scalable, high performance optoelectronic devices such as light-emitting diodes (LEDs) as well as coherent single photon emitters. Their integration to nanophotonic cavities for radiative enhancement and strong nonlinearity is underexplored. In this work, we demonstrate cavity-enhanced e… ▽ More Halide perovskite semiconductors have emerged as promising materials for the development of solution-processed, scalable, high performance optoelectronic devices such as light-emitting diodes (LEDs) as well as coherent single photon emitters. Their integration to nanophotonic cavities for radiative enhancement and strong nonlinearity is underexplored. In this work, we demonstrate cavity-enhanced emission and saturable absorption using colloidal CsPbBr$_3$ perovskite quantum dots coupled to a high-Q cavity mode of a circular Bragg grating structure designed to facilitate integration of solution-processed materials . We achieve an order of magnitude increase in brightness and 8-fold increase in the spontaneous emission rate for the cavity-coupled emitters. This result indicates the possibility of achieving transform-limited photon coherence for the halide perovskites at cryogenic temperatures. We also observe saturable absorption of the emitters through intensity-dependent cavity quality factor. These results pave the way towards achieving improved photon indistinguishability and strong optical nonlinearities for cavity coupled perovskite systems. △ Less

Submitted 12 December, 2023; originally announced December 2023.

Comments: 10 pages, 4 figures

Prediction and control of two-dimensional decaying turbulence using generative adversarial networks

Authors: Jiyeon Kim, Junhyuk Kim, Changhoon Lee

Abstract: With the recent rapid developments in machine learning (ML), several attempts have been made to apply ML methods to various fluid dynamics problems. However, the feasibility of ML for predicting turbulence dynamics has not yet been explored in detail. In this study, PredictionNet, a data-driven ML framework based on generative adversarial networks (GANs), was developed to predict two-dimensional (… ▽ More With the recent rapid developments in machine learning (ML), several attempts have been made to apply ML methods to various fluid dynamics problems. However, the feasibility of ML for predicting turbulence dynamics has not yet been explored in detail. In this study, PredictionNet, a data-driven ML framework based on generative adversarial networks (GANs), was developed to predict two-dimensional (2D) decaying turbulence. The developed prediction model accurately predicted turbulent fields at a finite lead time of up to half the Eulerian integral time scale. In addition to the high accuracy in pointwise metrics, various turbulence statistics, such as the probability density function, spatial correlation function, and enstrophy spectrum, were accurately captured by the employed GAN. Scale decomposition was used to interpret the predictability depending on the spatial scale, and the role of latent variables in the discriminator network was investigated. The good performance of the GAN in predicting small-scale turbulence is attributed to the scale-selection capability of the latent variable. Results also revealed that the recursive applications of the prediction model yielded better predictions than single predictions for large lead times. Furthermore, by utilizing PredictionNet as a surrogate model, a control model named ControlNet was developed to identify disturbance fields that drive the time evolution of the flow field in the direction that optimises the specified objective function. Therefore, an illustrative example in which the evolution of 2D turbulence can be predicted within a finite time horizon and controlled using a GAN-based deep neural network is presented. △ Less

Submitted 12 December, 2023; originally announced December 2023.

Optimizing the quality factor of InP nanobeam cavities using atomic layer deposition

Authors: Mohammad Habibur Rahaman, Chang-Min Lee, Mustafa Atabey Buyukkaya, Samuel Harper, Fariba Islam, Edo Waks

Abstract: Photonic crystal nanobeam cavities are valued for their small mode volume, CMOS compatibility, and high coupling efficiency crucial features for various low-power photonic applications and quantum information processing. However, despite their potential, nanobeam cavities often suffer from low quality factors due to fabrication imperfections that create surface states and optical absorption. In th… ▽ More Photonic crystal nanobeam cavities are valued for their small mode volume, CMOS compatibility, and high coupling efficiency crucial features for various low-power photonic applications and quantum information processing. However, despite their potential, nanobeam cavities often suffer from low quality factors due to fabrication imperfections that create surface states and optical absorption. In this work, we demonstrate InP nanobeam cavities with up to 140% higher quality factors by applying a coating of Al$_2$O$_3$ via atomic layer deposition to terminate dangling bonds and reduce surface absorption. Additionally, changing the deposition thickness allows precise tuning of the cavity mode wavelength without compromising the quality factor. This Al$_2$O$_3$ atomic layer deposition approach holds great promise for optimizing nanobeam cavities that are well-suited for integration with a wide range of photonic applications. △ Less

Submitted 10 December, 2023; originally announced December 2023.

High Absorptivity Nanotextured Powders for Additive Manufacturing

Authors: Ottman A. Tertuliano, Philip J. DePond, Andrew C. Lee, Jiho Hong, David Doan, Luc Capaldi, Mark Brongersma, X. Wendy Gu, Manyalibo J. Matthews, Wei Cai, Adrian J. Lew

Abstract: The widespread application of metal additive manufacturing (AM) is limited by the ability to control the complex interactions between the energy source and the feedstock material. Here we develop a generalizable process to introduce nanoscale grooves to the surface of metal powders which increases the powder absorptivity by up to 70% during laser powder bed fusion. Absorptivity enhancements in cop… ▽ More The widespread application of metal additive manufacturing (AM) is limited by the ability to control the complex interactions between the energy source and the feedstock material. Here we develop a generalizable process to introduce nanoscale grooves to the surface of metal powders which increases the powder absorptivity by up to 70% during laser powder bed fusion. Absorptivity enhancements in copper, copper-silver, and tungsten enables energy efficient manufacturing, with printing of pure copper at relative densities up to 92% using laser energy densities as low as 82 J/mm^3. Simulations show the enhanced powder absorptivity results from plasmon-enabled light concentration in nanoscale grooves combined with multiple scattering events. The approach taken here demonstrates a general method to enhance the absorptivity and printability of reflective and refractory metal powders by changing the surface morphology of the feedstock without altering its composition. △ Less

Submitted 8 December, 2023; originally announced December 2023.

The DUNE Far Detector Vertical Drift Technology, Technical Design Report

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, B. Aimard, F. Akbar, K. Allison, S. Alonso Monsalve, M. Alrashed, A. Alton, R. Alvarez, H. Amar, P. Amedo, J. Anderson, D. A. Andrade, C. Andreopoulos , et al. (1304 additional authors not shown)

Abstract: DUNE is an international experiment dedicated to addressing some of the questions at the forefront of particle physics and astrophysics, including the mystifying preponderance of matter over antimatter in the early universe. The dual-site experiment will employ an intense neutrino beam focused on a near and a far detector as it aims to determine the neutrino mass hierarchy and to make high-precisi… ▽ More DUNE is an international experiment dedicated to addressing some of the questions at the forefront of particle physics and astrophysics, including the mystifying preponderance of matter over antimatter in the early universe. The dual-site experiment will employ an intense neutrino beam focused on a near and a far detector as it aims to determine the neutrino mass hierarchy and to make high-precision measurements of the PMNS matrix parameters, including the CP-violating phase. It will also stand ready to observe supernova neutrino bursts, and seeks to observe nucleon decay as a signature of a grand unified theory underlying the standard model. The DUNE far detector implements liquid argon time-projection chamber (LArTPC) technology, and combines the many tens-of-kiloton fiducial mass necessary for rare event searches with the sub-centimeter spatial resolution required to image those events with high precision. The addition of a photon detection system enhances physics capabilities for all DUNE physics drivers and opens prospects for further physics explorations. Given its size, the far detector will be implemented as a set of modules, with LArTPC designs that differ from one another as newer technologies arise. In the vertical drift LArTPC design, a horizontal cathode bisects the detector, creating two stacked drift volumes in which ionization charges drift towards anodes at either the top or bottom. The anodes are composed of perforated PCB layers with conductive strips, enabling reconstruction in 3D. Light-trap-style photon detection modules are placed both on the cryostat's side walls and on the central cathode where they are optically powered. This Technical Design Report describes in detail the technical implementations of each subsystem of this LArTPC that, together with the other far detector modules and the near detector, will enable DUNE to achieve its physics goals. △ Less

Submitted 5 December, 2023; originally announced December 2023.

Comments: 425 pages; 281 figures Central editing team: A. Heavey, S. Kettell, A. Marchionni, S. Palestini, S. Rajogopalan, R. J. Wilson

Report number: Fermilab Report no: TM-2813-LBNF

Buckling instability in a chain of sticky bubbles

Authors: Carmen L. Lee, Kari Dalnoki-Veress

Abstract: A slender object undergoing an axial compression will buckle to alleviate the stress. Typically the morphology of the deformed object depends on the bending stiffness for solids, or the viscoelastic properties for liquid threads. We study a chain of uniform sticky air bubbles that rise due to buoyancy through an aqueous bath. A buckling instability of the bubble chain with a characteristic wavelen… ▽ More A slender object undergoing an axial compression will buckle to alleviate the stress. Typically the morphology of the deformed object depends on the bending stiffness for solids, or the viscoelastic properties for liquid threads. We study a chain of uniform sticky air bubbles that rise due to buoyancy through an aqueous bath. A buckling instability of the bubble chain with a characteristic wavelength is observed. If a chain of bubbles is produced faster than it is able to rise, the dominance of viscous drag over buoyancy results in a compressive stress that is alleviated by buckling the bubble chain. Using low Reynolds number hydrodynamics, we predict the critical buckling speed, the terminal speed of a buckled chain, and the geometry of the buckles. △ Less

Submitted 30 May, 2024; v1 submitted 26 November, 2023; originally announced November 2023.

Comments: 7 pages, 5 figures

Comprehensive peak-width analysis in matter-wave diffraction under grazing incidence conditions

Authors: Lee Yeong Kim, Do Won Kang, Jong Chan Lee, Eunmi Chae, Wieland Schöllkopf, Bum Suk Zhao

Abstract: Thermal energy atom scattering at a surface with grazing incidence conditions is an innovative method for investigating dispersive atom-surface interactions with potential application in quantum sensing interferometry. The complete establishment of this technique would require a detailed peak analysis, which has yet to be achieved. We examined peak-width fluctuations in atomic and molecular beams… ▽ More Thermal energy atom scattering at a surface with grazing incidence conditions is an innovative method for investigating dispersive atom-surface interactions with potential application in quantum sensing interferometry. The complete establishment of this technique would require a detailed peak analysis, which has yet to be achieved. We examined peak-width fluctuations in atomic and molecular beams diffracted by a grating under grazing incidence conditions. Careful measurements and analyses of the diffraction patterns of He atoms and D$_2$ molecules from three square-wave gratings with different periods and radii of curvature enabled the identification of factors influencing the variations in the width as a function of the grazing incidence angle. The effects of macroscopic surface curvature, grating magnification, and beam emergence are substantial under these conditions but negligible for incidence angles close to the normal. Our results shed light on the phenomena occurring in grazing incidence thermal energy atom scattering. △ Less

Submitted 17 January, 2024; v1 submitted 21 November, 2023; originally announced November 2023.

Comments: 9 pages, 8 figures, 2 tables

Secondary beams at high-intensity electron accelerator facilities

Authors: Marco Battaglieri, Andrea Bianconi, Mariangela Bondí, Raffaella De Vita, Antonino Fulci, Giulia Gosta, Stefano Grazzi, Hyon-Suk Jo, Changhui Lee, Giuseppe Mandaglio, Valerio Mascagna, Tetiana Nagorna, Alessandro Pilloni, Marco Spreafico, Luca J Tagliapietra, Luca Venturelli, Tommaso Vittorini

Abstract: The interaction of a high-current $O$(100~\textmu A), medium energy $O$(10\,GeV) electron beam with a thick target $O$(1m) produces an overwhelming shower of standard matter particles in addition to hypothetical Light Dark Matter particles. While most of the radiation (gamma, electron/positron, and neutron) is contained in the thick target, deep penetrating particles (muons, neutrinos, and light d… ▽ More The interaction of a high-current $O$(100~\textmu A), medium energy $O$(10\,GeV) electron beam with a thick target $O$(1m) produces an overwhelming shower of standard matter particles in addition to hypothetical Light Dark Matter particles. While most of the radiation (gamma, electron/positron, and neutron) is contained in the thick target, deep penetrating particles (muons, neutrinos, and light dark matter particles) propagate over a long distance, producing high-intense secondary beams. Using sophisticated Monte Carlo simulations based on FLUKA and GEANT4, we explored the characteristics of secondary muons and neutrinos and (hypothetical) dark scalar particles produced by the interaction of Jefferson Lab 11 GeV intense electron beam with the experimental Hall-A beam dump. Considering the possible beam energy upgrade, this study was repeated for a 20 GeV CEBAF beam. △ Less

Submitted 8 January, 2024; v1 submitted 14 November, 2023; originally announced November 2023.

Journal ref: Instruments 2024, 8(1), 1

Exceptional points in non-Hermitian Photonics: Applications and Recent Developments

Authors: Haiyu Meng, Yee Sin Ang, Ching Hua Lee

Abstract: Exceptional points are complex branching singularities of non-Hermitian bands that have lately attracted considerable interest, particularly in non-Hermitian photonics. In this article, we review some recent developments in non-Hermitian photonic platforms such as waveguides, photonic crystals, Fabry-Perot resonators and plasmonic systems, and suggest how optical non-linearities and exceptional bo… ▽ More Exceptional points are complex branching singularities of non-Hermitian bands that have lately attracted considerable interest, particularly in non-Hermitian photonics. In this article, we review some recent developments in non-Hermitian photonic platforms such as waveguides, photonic crystals, Fabry-Perot resonators and plasmonic systems, and suggest how optical non-linearities and exceptional bound states can significantly impact the development of non-Hermitian photonics in the near future. △ Less

Submitted 27 October, 2023; v1 submitted 25 October, 2023; originally announced October 2023.

Cavity enhanced emission from a silicon T center

Authors: Fariba Islam, Chang-Min Lee, Samuel Harper, Mohammad Habibur Rahaman, Yuqi Zhao, Neelesh Kumar Vij, Edo Waks

Abstract: Silicon T centers present the promising possibility to generate optically active spin qubits in an all-silicon device. However, these color centers exhibit long excited state lifetimes and a low Debye-Waller factor, making them dim emitters with low efficiency into the zero-phonon line. Nanophotonic cavities can solve this problem by enhancing radiative emission into the zero-phonon line through t… ▽ More Silicon T centers present the promising possibility to generate optically active spin qubits in an all-silicon device. However, these color centers exhibit long excited state lifetimes and a low Debye-Waller factor, making them dim emitters with low efficiency into the zero-phonon line. Nanophotonic cavities can solve this problem by enhancing radiative emission into the zero-phonon line through the Purcell effect. In this work we demonstrate cavity-enhanced emission from a single T center in a nanophotonic cavity. We achieve a two-orders of magnitude increase in brightness of the zero-phonon line relative to waveguide-coupled emitters, a 23% collection efficiency from emitter to fiber, and an overall emission efficiency into the zero-phonon line of 63.4%. We also observe a lifetime enhancement of 5, corresponding to a Purcell factor exceeding 18 when correcting for the emission to the phonon sideband. These results pave the way towards efficient spin-photon interfaces in silicon photonics. △ Less

Submitted 25 October, 2023; v1 submitted 20 October, 2023; originally announced October 2023.

Comments: References updated

Journal ref: Nano Lett. 2024, 24, 1, 319

Pulsed-mode metalorganic vapor-phase epitaxy of GaN on graphene-coated c-sapphire for freestanding GaN thin films

Authors: Seokje Lee, Muhammad S. Abbas, Dongha Yoo, Keundong Lee, Tobiloba G. Fabunmi, Eunsu Lee, Han Ik Kim, Imhwan Kim, Daniel Jang, Sangmin Lee, Jusang Lee, Ki-Tae Park, Changgu Lee, Miyoung Kim, Yun Seog Lee, Celesta S. Chang, Gyu-Chul Yi

Abstract: We report the growth of high-quality GaN epitaxial thin films on graphene-coated c-sapphire substrates using pulsed-mode metalorganic vapor-phase epitaxy, together with the fabrication of freestanding GaN films by simple mechanical exfoliation for transferable light-emitting diodes (LEDs). High-quality GaN films grown on the graphene-coated sapphire substrates were easily lifted off using thermal… ▽ More We report the growth of high-quality GaN epitaxial thin films on graphene-coated c-sapphire substrates using pulsed-mode metalorganic vapor-phase epitaxy, together with the fabrication of freestanding GaN films by simple mechanical exfoliation for transferable light-emitting diodes (LEDs). High-quality GaN films grown on the graphene-coated sapphire substrates were easily lifted off using thermal release tape and transferred onto foreign substrates. Furthermore, we revealed that the pulsed operation of ammonia flow during GaN growth was a critical factor for the fabrication of high-quality freestanding GaN films. These films, exhibiting excellent single crystallinity, were utilized to fabricate transferable GaN LEDs by heteroepitaxially growing InxGa1-xN/GaN multiple quantum wells and a p-GaN layer on the GaN films, showing their potential application in advanced optoelectronic devices. △ Less

Submitted 5 December, 2023; v1 submitted 8 October, 2023; originally announced October 2023.

Comments: This document is the unedited Author's version of a Submitted Work that was subsequently accepted for publication in Nano Letters, copyright 2023 American Chemical Society after peer review. To access the final edited and published work see https://doi.org/10.1021/acs.nanolett.3c03333

Single mode laser in the telecom range by deterministic amplification of the topological interface mode

Authors: Markus Scherrer, Chang-Won Lee, Heinz Schmid, Kirsten E. Moselund

Abstract: Photonic integrated circuits are paving the way for novel on-chip functionalities with diverse applications in communication, computing, and beyond. The integration of on-chip light sources, especially single-mode lasers, is crucial for advancing those photonic chips to their full potential. Recently, novel concepts involving topological designs introduced a variety of options for tuning device pr… ▽ More Photonic integrated circuits are paving the way for novel on-chip functionalities with diverse applications in communication, computing, and beyond. The integration of on-chip light sources, especially single-mode lasers, is crucial for advancing those photonic chips to their full potential. Recently, novel concepts involving topological designs introduced a variety of options for tuning device properties such as the desired single mode emission. Here we introduce a novel cavity design that allows to amplify the topological interface mode by deterministic placement of gain material within the topological lattice. The proposed design is experimentally implemented by a selective epitaxy process resulting in Si and InGaAs nanorods embedded within the same topological lattice. This results in the first demonstration of a single-mode laser in the telecom band using the concept of amplified topological modes. △ Less

Submitted 12 September, 2023; originally announced September 2023.

New Observations Needed to Advance Our Understanding of Coronal Mass Ejections

Authors: Erika Palmerio, Benjamin J. Lynch, Christina O. Lee, Lan K. Jian, Teresa Nieves-Chinchilla, Emma E. Davies, Brian E. Wood, Noé Lugaz, Réka M. Winslow, Tibor Török, Nada Al-Haddad, Florian Regnault, Meng Jin, Camilla Scolini, Fernando Carcaboso, Charles J. Farrugia, Vincent E. Ledvina, Cooper Downs, Christina Kay, Sanchita Pal, Tarik M. Salman, Robert C. Allen

Abstract: Coronal mass ejections (CMEs) are large eruptions from the Sun that propagate through the heliosphere after launch. Observational studies of these transient phenomena are usually based on 2D images of the Sun, corona, and heliosphere (remote-sensing data), as well as magnetic field, plasma, and particle samples along a 1D spacecraft trajectory (in-situ data). Given the large scales involved and th… ▽ More Coronal mass ejections (CMEs) are large eruptions from the Sun that propagate through the heliosphere after launch. Observational studies of these transient phenomena are usually based on 2D images of the Sun, corona, and heliosphere (remote-sensing data), as well as magnetic field, plasma, and particle samples along a 1D spacecraft trajectory (in-situ data). Given the large scales involved and the 3D nature of CMEs, such measurements are generally insufficient to build a comprehensive picture, especially in terms of local variations and overall geometry of the whole structure. This White Paper aims to address this issue by identifying the data sets and observational priorities that are needed to effectively advance our current understanding of the structure and evolution of CMEs, in both the remote-sensing and in-situ regimes. It also provides an outlook of possible missions and instruments that may yield significant improvements into the subject. △ Less

Submitted 11 September, 2023; originally announced September 2023.

Comments: White Paper submitted to the Heliophysics 2024-2033 Decadal Survey, 9 pages, 4 figures

Journal ref: Bulletin of the AAS, 55(3), 307, 2023

Reynolds Averaged Solutions of the Navier-Stokes Equation

Authors: James Glimm, Min Chul Lee, Abdul Hasib Rahimyar

Abstract: The mean of Young measure solutions for the Navier-Stokes equations with general initial conditions are PDE solutions of the Navier-Stokes equation of the class considered by Leray and Hopf. The mean of Young measure solutions for the Navier-Stokes equations with general initial conditions are PDE solutions of the Navier-Stokes equation of the class considered by Leray and Hopf. △ Less

Submitted 26 January, 2024; v1 submitted 5 September, 2023; originally announced September 2023.

Comments: A critical error was found in one of the proofs

MaxFloodCast: Ensemble Machine Learning Model for Predicting Peak Inundation Depth And Decoding Influencing Features

Authors: Cheng-Chun Lee, Lipai Huang, Federico Antolini, Matthew Garcia, Andrew Juanb, Samuel D. Brody, Ali Mostafavi

Abstract: Timely, accurate, and reliable information is essential for decision-makers, emergency managers, and infrastructure operators during flood events. This study demonstrates a proposed machine learning model, MaxFloodCast, trained on physics-based hydrodynamic simulations in Harris County, offers efficient and interpretable flood inundation depth predictions. Achieving an average R-squared of 0.949 a… ▽ More Timely, accurate, and reliable information is essential for decision-makers, emergency managers, and infrastructure operators during flood events. This study demonstrates a proposed machine learning model, MaxFloodCast, trained on physics-based hydrodynamic simulations in Harris County, offers efficient and interpretable flood inundation depth predictions. Achieving an average R-squared of 0.949 and a Root Mean Square Error of 0.61 ft on unseen data, it proves reliable in forecasting peak flood inundation depths. Validated against Hurricane Harvey and Storm Imelda, MaxFloodCast shows the potential in supporting near-time floodplain management and emergency operations. The model's interpretability aids decision-makers in offering critical information to inform flood mitigation strategies, to prioritize areas with critical facilities and to examine how rainfall in other watersheds influences flood exposure in one area. The MaxFloodCast model enables accurate and interpretable inundation depth predictions while significantly reducing computational time, thereby supporting emergency response efforts and flood risk management more effectively. △ Less

Submitted 11 August, 2023; originally announced August 2023.

Calculations of Chern number: equivalence of real-space and twisted-boundary-condition formulae

Authors: Ling Lin, Yongguan Ke, Li Zhang, Chaohong Lee

Abstract: Chern number is a crucial invariant for characterizing topological feature of two-dimensional quantum systems. Real-space Chern number allows us to extract topological properties of systems without involving translational symmetry, and hence plays an important role in investigating topological systems with disorder or impurity. On the other hand, the twisted boundary condition (TBC) can also be us… ▽ More Chern number is a crucial invariant for characterizing topological feature of two-dimensional quantum systems. Real-space Chern number allows us to extract topological properties of systems without involving translational symmetry, and hence plays an important role in investigating topological systems with disorder or impurity. On the other hand, the twisted boundary condition (TBC) can also be used to define the Chern number in the absence of translational symmetry. Based on the perturbative nature of the TBC under appropriate gauges, we derive the two real-space formulae of Chern number (namely the non-commutative Chern number and the Bott index formula), which are numerically confirmed for the Chern insulator and the quantum spin Hall insulator. Our results not only establish the equivalence between the real-space and TBC formula of the Chern number, but also provide concrete and instructive examples for deriving the real-space topological invariant through the twisted boundary condition. △ Less

Submitted 7 November, 2023; v1 submitted 8 August, 2023; originally announced August 2023.

Comments: none

Half-Valley Ohmic Contact and Contact-Limited Valley-Contrasting Current Injection

Authors: Xukun Feng, Chit Siong Lau, Shi-Jun Liang, Ching Hua Lee, Shengyuan A. Yang, Yee Sin Ang

Abstract: Two-dimensional (2D) ferrovalley semiconductor (FVSC) with spontaneous valley polarization offers an exciting material platform for probing Berry phase physics. How FVSC can be incorporated in valleytronic device applications, however, remain an open question. Here we generalize the concept of metal/semiconductor (MS) contact into the realm of valleytronics. We propose a half-valley Ohmic contact… ▽ More Two-dimensional (2D) ferrovalley semiconductor (FVSC) with spontaneous valley polarization offers an exciting material platform for probing Berry phase physics. How FVSC can be incorporated in valleytronic device applications, however, remain an open question. Here we generalize the concept of metal/semiconductor (MS) contact into the realm of valleytronics. We propose a half-valley Ohmic contact based on FVSC/graphene heterostructure where the two valleys of FVSC separately forms Ohmic and Schottky contacts with those of graphene, thus allowing current to be valley-selectively injected through the `Ohmic' valley while being blocked in the `Schottky' valley. We develop a theory of contact-limited valley-contrasting current injection and demonstrate that such transport mechanism can produce gate-tunable valley-polarized injection current. Using RuCl$_2$/graphene heterostructure as an example, we illustrate a device concept of valleytronic barristor where high valley polarization efficiency and sizable current on/off ratio, can be achieved under experimentally feasible electrostatic gating conditions. These findings uncover contact-limited valley-contrasting current injection as an efficient mechanism for valley polarization manipulation, and reveals the potential of valleytronic MS contact as a functional building block of valleytronic device technology. △ Less

Submitted 9 August, 2023; v1 submitted 7 August, 2023; originally announced August 2023.

Comments: 9 pages, 5 figures

Development of a Boston-area 50-km fiber quantum network testbed

Authors: Eric Bersin, Matthew Grein, Madison Sutula, Ryan Murphy, Yan Qi Huan, Mark Stevens, Aziza Suleymanzade, Catherine Lee, Ralf Riedinger, David J. Starling, Pieter-Jan Stas, Can M. Knaut, Neil Sinclair, Daniel R. Assumpcao, Yan-Cheng Wei, Erik N. Knall, Bartholomeus Machielse, Denis D. Sukachev, David S. Levonian, Mihir K. Bhaskar, Marko Lončar, Scott Hamilton, Mikhail Lukin, Dirk Englund, P. Benjamin Dixon

Abstract: Distributing quantum information between remote systems will necessitate the integration of emerging quantum components with existing communication infrastructure. This requires understanding the channel-induced degradations of the transmitted quantum signals, beyond the typical characterization methods for classical communication systems. Here we report on a comprehensive characterization of a Bo… ▽ More Distributing quantum information between remote systems will necessitate the integration of emerging quantum components with existing communication infrastructure. This requires understanding the channel-induced degradations of the transmitted quantum signals, beyond the typical characterization methods for classical communication systems. Here we report on a comprehensive characterization of a Boston-Area Quantum Network (BARQNET) telecom fiber testbed, measuring the time-of-flight, polarization, and phase noise imparted on transmitted signals. We further design and demonstrate a compensation system that is both resilient to these noise sources and compatible with integration of emerging quantum memory components on the deployed link. These results have utility for future work on the BARQNET as well as other quantum network testbeds in development, enabling near-term quantum networking demonstrations and informing what areas of technology development will be most impactful in advancing future system capabilities. △ Less

Submitted 5 January, 2024; v1 submitted 28 July, 2023; originally announced July 2023.

Comments: 9 pages, 5 figures + Supplemental Materials

Can exact scaling exponents be obtained using the renormalization group? Affirmative evidence from incompressible polar active fluids

Authors: Patrick Jentsch, Chiu Fan Lee

Abstract: In active matter systems, non-Gaussian, exact scaling exponents have been claimed in a range of systems using perturbative renormalization group (RG) methods. This is unusual compared to equilibrium systems where non-Gaussian exponents can typically only be approximated, even using the exact (or functional/nonperturbative) renormalization group (ERG). Here, we perform an ERG analysis on the ordere… ▽ More In active matter systems, non-Gaussian, exact scaling exponents have been claimed in a range of systems using perturbative renormalization group (RG) methods. This is unusual compared to equilibrium systems where non-Gaussian exponents can typically only be approximated, even using the exact (or functional/nonperturbative) renormalization group (ERG). Here, we perform an ERG analysis on the ordered phase of incompressible polar active fluids and find that the exact non-Gaussian exponents obtained previously using a perturbative RG method remain valid even in this nonperturbative setting. Furthermore, our ERG analysis elucidates the RG flow of this system and enables us to identify an active Goldstone regime with nontrivial, long-ranged scaling behavior for parallel and longitudinal fluctuations. △ Less

Submitted 18 April, 2024; v1 submitted 13 July, 2023; originally announced July 2023.

Comments: 7 pages, 1 figure

Realizing efficient topological temporal pumping in electrical circuits

Authors: Alexander Stegmaier, Hauke Brand, Stefan Imhof, Alexander Fritzsche, Tobias Helbig, Tobias Hofmann, Igor Boettcher, Martin Greiter, Ching Hua Lee, Gaurav Bahl, Alexander Szameit, Tobias Kießling, Ronny Thomale, Lavi K. Upreti

Abstract: Quantized adiabatic transport can occur when a system is slowly modulated over time. In most realizations however, the efficiency of such transport is reduced by unwanted dissipation, back-scattering, and non-adiabatic effects. In this work, we realize a topological adiabatic pump in an electrical circuit network that supports remarkably stable and long-lasting pumping of a voltage signal. We furt… ▽ More Quantized adiabatic transport can occur when a system is slowly modulated over time. In most realizations however, the efficiency of such transport is reduced by unwanted dissipation, back-scattering, and non-adiabatic effects. In this work, we realize a topological adiabatic pump in an electrical circuit network that supports remarkably stable and long-lasting pumping of a voltage signal. We further characterize the topology of our system by deducing the Chern number from the measured edge band structure. To achieve this, the experimental setup makes use of active circuit elements that act as time-variable voltage-controlled inductors. △ Less

Submitted 27 June, 2023; originally announced June 2023.

Comments: main (5 pages, 3 figures) plus supplement (8 pages, 4 figures)

Topologically Protected Exceptional Points and Reentrant $\mathcal{PT}$ Phase in an Exact Ternary Model

Authors: Chulwon Lee, Kai Zhang, Jinyan Miao, Kai Sun, Hui Deng

Abstract: In open, driven systems where parity-time symmetry is preserved, phenomena that defy conventional wisdom emerge near exceptional points, promising advances in photonics. While most studies focus on two-level systems of a conventional exceptional point, unconventional exceptional points as well as reentrant phases have been discovered in separate studies of higher-dimensional phase spaces. In this… ▽ More In open, driven systems where parity-time symmetry is preserved, phenomena that defy conventional wisdom emerge near exceptional points, promising advances in photonics. While most studies focus on two-level systems of a conventional exceptional point, unconventional exceptional points as well as reentrant phases have been discovered in separate studies of higher-dimensional phase spaces. In this Letter, we present a minimal, analytical model that encompasses several key phenomena in higher-dimensional phase spaces, including reentrant PT phases, higher-order exceptional points, and anisotropic exceptional points. Using the exact analytical solution, we identify a new topological index as the unifying origin of these different phenomena. The simplicity of the model may furthermore facilitate experimental implementations for enhanced sensing and efficient polariton devices. △ Less

Submitted 17 January, 2024; v1 submitted 24 June, 2023; originally announced June 2023.

Comments: 12 pages, 7 figures

Tunable quantum emitters on large-scale foundry silicon photonics

Authors: Hugo Larocque, Mustafa Atabey Buyukkaya, Carlos Errando-Herranz, Samuel Harper, Jacques Carolan, Chang-Min Lee, Christopher J. K. Richardson, Gerald L. Leake, Daniel J. Coleman, Michael L. Fanto, Edo Waks, Dirk Englund

Abstract: Controlling large-scale many-body quantum systems at the level of single photons and single atomic systems is a central goal in quantum information science and technology. Intensive research and development has propelled foundry-based silicon-on-insulator photonic integrated circuits to a leading platform for large-scale optical control with individual mode programmability. However, integrating at… ▽ More Controlling large-scale many-body quantum systems at the level of single photons and single atomic systems is a central goal in quantum information science and technology. Intensive research and development has propelled foundry-based silicon-on-insulator photonic integrated circuits to a leading platform for large-scale optical control with individual mode programmability. However, integrating atomic quantum systems with single-emitter tunability remains an open challenge. Here, we overcome this barrier through the hybrid integration of multiple InAs/InP microchiplets containing high-brightness infrared semiconductor quantum dot single photon emitters into advanced silicon-on-insulator photonic integrated circuits fabricated in a 300~mm foundry process. With this platform, we achieve single photon emission via resonance fluorescence and scalable emission wavelength tunability through an electrically controlled non-volatile memory. The combined control of photonic and quantum systems opens the door to programmable quantum information processors manufactured in leading semiconductor foundries. △ Less

Submitted 29 June, 2023; v1 submitted 10 June, 2023; originally announced June 2023.

Comments: 9 pages, 4 figures

A generalized approach to photon avalanche upconversion in luminescent nanocrystals

Authors: Artiom Skripka, Minji Lee, Xiao Qi, Jia-Ahn Pan, Haoran Yang, Changhwan Lee, P. James Schuck, Bruce E. Cohen, Daniel Jaque, Emory M. Chan

Abstract: Photon avalanching nanoparticles (ANPs) exhibit extremely nonlinear upconverted emission valuable for sub-diffraction imaging, nanoscale sensing, and optical computing. Avalanching has been demonstrated with Tm3+, Nd3+ or Pr3+-doped nanocrystals, but their emission is limited to 600 and 800 nm, restricting applications. Here, we utilize Gd3+-assisted energy migration to tune the emission wavelengt… ▽ More Photon avalanching nanoparticles (ANPs) exhibit extremely nonlinear upconverted emission valuable for sub-diffraction imaging, nanoscale sensing, and optical computing. Avalanching has been demonstrated with Tm3+, Nd3+ or Pr3+-doped nanocrystals, but their emission is limited to 600 and 800 nm, restricting applications. Here, we utilize Gd3+-assisted energy migration to tune the emission wavelengths of Tm3+-sensitized ANPs and generate highly nonlinear emission of Eu3+, Tb3+, Ho3+, and Er3+ ions. The upconversion intensities of these spectrally discrete ANPs scale with the nonlinearity factor s = 10-17 under 1064 nm excitation at power densities as low as 6 kW/cm2. This strategy for imprinting avalanche behavior on remote emitters can be extended to fluorophores adjacent to ANPs, as we demonstrate with CdS/CdSe/CdS core/shell/shell quantum dots. ANPs with rationally designed energy transfer networks provide the means to transform conventional linear emitters into a highly nonlinear ones, expanding the use of photon avalanching in biological, chemical, and photonic applications. △ Less

Submitted 9 June, 2023; originally announced June 2023.

Comments: 13 pages, 5 figures

Work-Life Balance Starts with Proper Deadlines and Exemplary Agencies

Authors: Noé Lugaz, Réka M. Winslow, Nada Al-Haddad, Christina O. Lee, Sarah K. Vines, Katharine Reeves, Amir Caspi, Daniel Seaton, Cooper Downs, Lindsay Glesener, Angelos Vourlidas, Camilla Scolini, Tibor Török, Robert Allen, Erika Palmerio

Abstract: Diversity, equity and inclusion (DEI) programs can only be implemented successfully if proper work-life balance is possible in Heliophysics (and in STEM field in general). One of the core issues stems from the culture of "work-above-life" associated with mission concepts, development, and implementation but also the expectations that seem to originate from numerous announcements from NASA (and oth… ▽ More Diversity, equity and inclusion (DEI) programs can only be implemented successfully if proper work-life balance is possible in Heliophysics (and in STEM field in general). One of the core issues stems from the culture of "work-above-life" associated with mission concepts, development, and implementation but also the expectations that seem to originate from numerous announcements from NASA (and other agencies). The benefits of work-life balance are well documented; however, the entire system surrounding research in Heliophysics hinders or discourages proper work-life balance. For example, there does not seem to be attention paid by NASA Headquarters (HQ) on the timing of their announcements regarding how it will be perceived by researchers, and how the timing may promote a culture where work trumps personal life. The same is true for remarks by NASA HQ program officers during panels or informal discussions, where seemingly innocuous comments may give a perception that work is expected after "normal" work hours. In addition, we are calling for work-life balance plans and implementation to be one of the criteria used for down-selection and confirmation of missions (Key Decision Points: KDP-B, KDP-C). △ Less

Submitted 8 June, 2023; originally announced June 2023.

Comments: White paper submitted to the Decadal Survey for Solar and Space Physics (Heliophysics) 2024-2033; 6 pages

Journal ref: Bulletin of the AAS, Vol. 55, Issue 3, Whitepaper #250 (6pp); 2023 July 31

How Does Mg$^{2+}_{(aq)}$ Interact with ATP$_{(aq)}$? Biomolecular Structure through the Lens of Liquid-Jet Photoelectron Spectroscopy

Authors: Karen Mudryk, Chin Lee, Lukáš Tomaník, Sebastian Malerz, Florian Trinter, Uwe Hergenhahn, Daniel M. Neumark, Petr Slavíček, Stephen Bradforth, Bernd Winter

Abstract: Site-specific information on how adenosine triphosphate in the aqueous phase (ATP$_{(aq)}$) interacts with magnesium (Mg$^{2+}_{(aq)}$) is a prerequisite to understanding its complex biochemistry. To gather such information, we apply liquid-jet photoelectron spectroscopy (LJ-PES) assisted by electronic-structure calculations to study ATP$_{(aq)}$ solutions with and without dissolved Mg$^{2+}$. Val… ▽ More Site-specific information on how adenosine triphosphate in the aqueous phase (ATP$_{(aq)}$) interacts with magnesium (Mg$^{2+}_{(aq)}$) is a prerequisite to understanding its complex biochemistry. To gather such information, we apply liquid-jet photoelectron spectroscopy (LJ-PES) assisted by electronic-structure calculations to study ATP$_{(aq)}$ solutions with and without dissolved Mg$^{2+}$. Valence photoemission data reveal spectral changes in the phosphate and adenine features of ATP$_{(aq)}$ due to interactions with the divalent cation. Chemical shifts in Mg 2p, Mg 2s, P 2p, and P 2s core-level spectra as a function of the Mg$^{2+}$/ATP concentration ratio are correlated to the formation of [MgATP]$^{-2}_{(aq)}$ and Mg$_2$ATP$_{(aq)}$ complexes, demonstrating the element-sensitivity of the technique to Mg$^{2+}$-phosphate interactions. In addition, we report and compare P 2s data from ATP$_{(aq)}$ and adenosine mono- and di-phosphate (AMP$_{(aq)}$ and ADP$_{(aq)}$, respectively) solutions, probing the electronic structure of the phosphate chain and the local environment of individual phosphate units in ATP$_{(aq)}$. Finally, we have recorded intermolecular Coulombic decay (ICD) spectra initiated by ionization of Mg 1s electrons to probe ligand exchange in the Mg$^{2+}$-ATP$_{(aq)}$ coordination environment, demonstrating the unique capabilities of ICD for revealing structural information. Our results provide an overview of the electronic structure of ATP$_{(aq)}$ and Mg$^{2+}$-ATP$_{(aq)}$ moieties relevant to phosphorylation and dephosphorylation reactions that are central to bioenergetics in living organisms. △ Less

Submitted 14 June, 2024; v1 submitted 8 June, 2023; originally announced June 2023.

Comments: Main manuscript: 16 pages, 8 figures. Supporting information: 31 pages, 7 figures

Journal ref: J. Am. Chem. Soc. 146, 16062-16075 (2024)