-
Projected background and sensitivity of AMoRE-II
Authors:
A. Agrawal,
V. V. Alenkov,
P. Aryal,
J. Beyer,
B. Bhandari,
R. S. Boiko,
K. Boonin,
O. Buzanov,
C. R. Byeon,
N. Chanthima,
M. K. Cheoun,
J. S. Choe,
Seonho Choi,
S. Choudhury,
J. S. Chung,
F. A. Danevich,
M. Djamal,
D. Drung,
C. Enss,
A. Fleischmann,
A. M. Gangapshev,
L. Gastaldo,
Y. M. Gavrilyuk,
A. M. Gezhaev,
O. Gileva
, et al. (81 additional authors not shown)
Abstract:
AMoRE-II aims to search for neutrinoless double beta decay with an array of 423 Li$_2$$^{100}$MoO$_4$ crystals operating in the cryogenic system as the main phase of the Advanced Molybdenum-based Rare process Experiment (AMoRE). AMoRE has been planned to operate in three phases: AMoRE-pilot, AMoRE-I, and AMoRE-II. AMoRE-II is currently being installed at the Yemi Underground Laboratory, located ap…
▽ More
AMoRE-II aims to search for neutrinoless double beta decay with an array of 423 Li$_2$$^{100}$MoO$_4$ crystals operating in the cryogenic system as the main phase of the Advanced Molybdenum-based Rare process Experiment (AMoRE). AMoRE has been planned to operate in three phases: AMoRE-pilot, AMoRE-I, and AMoRE-II. AMoRE-II is currently being installed at the Yemi Underground Laboratory, located approximately 1000 meters deep in Jeongseon, Korea. The goal of AMoRE-II is to reach up to $T^{0νββ}_{1/2}$ $\sim$ 6 $\times$ 10$^{26}$ years, corresponding to an effective Majorana mass of 15 - 29 meV, covering all the inverted mass hierarchy regions. To achieve this, the background level of the experimental configurations and possible background sources of gamma and beta events should be well understood. We have intensively performed Monte Carlo simulations using the GEANT4 toolkit in all the experimental configurations with potential sources. We report the estimated background level that meets the 10$^{-4}$counts/(keV$\cdot$kg$\cdot$yr) requirement for AMoRE-II in the region of interest (ROI) and show the projected half-life sensitivity based on the simulation study.
△ Less
Submitted 13 June, 2024;
originally announced June 2024.
-
Efficient Synthesis of Passively Loaded Finite Arrays for Tunable Anomalous Reflection
Authors:
Sravan K. R. Vuyyuru,
Risto Valkonen,
Sergei A. Tretyakov,
Do-Hoon Kwon
Abstract:
A design methodology for planar loaded antenna arrays is proposed to synthesize a perfect anomalous reflection into an arbitrary direction by optimizing the scattering characteristics of passively loaded array antennas. It is based on efficient and accurate prediction of the induced current distribution and the associated scattering for any given set of load impedances. For a fixed array of finite…
▽ More
A design methodology for planar loaded antenna arrays is proposed to synthesize a perfect anomalous reflection into an arbitrary direction by optimizing the scattering characteristics of passively loaded array antennas. It is based on efficient and accurate prediction of the induced current distribution and the associated scattering for any given set of load impedances. For a fixed array of finite dimensions, the deflection angles can be continuously adjusted with proper tuning of each load. We study and develop anomalous reflectors as semi-finite (finite $\times$ infinite) and finite planar rectangular arrays comprising printed patches with a subwavelength spacing. Anomalous reflection into an arbitrary desired angle using purely reactive loads is numerically and experimentally validated. Owing to the algebraic nature of load optimization, the design methodology may be applied to the synthesis of large-scale reflectors of practical significance.
△ Less
Submitted 7 December, 2023;
originally announced December 2023.
-
Vibrational, non-adiabatic and isotopic effects in the dynamics of the H$_2$ + H$_2^+$ $\rightarrow$ H$_3^+$ + H reaction: application to plasma modeling
Authors:
P. del Mazo-Sevillano,
D. Félix-González,
A. Aguado,
C. Sanz-Sanz,
D. -H. Kwon,
O. Roncero
Abstract:
The title reaction is studied using a quasi-classical trajectory method for collision energies between 0.1 meV and 10 eV, considering the vibrational excitation of H$_2^+$ reactant. A new potential energy surface is developed based on a Neural Network many body correction of a triatomics-in-molecules potential, which significantly improves the accuracy of the potential up to energies of 17 eV, hig…
▽ More
The title reaction is studied using a quasi-classical trajectory method for collision energies between 0.1 meV and 10 eV, considering the vibrational excitation of H$_2^+$ reactant. A new potential energy surface is developed based on a Neural Network many body correction of a triatomics-in-molecules potential, which significantly improves the accuracy of the potential up to energies of 17 eV, higher than in other previous fits.The effect of the fit accuracy and the non-adiabatic transitions on the dynamics are analyzed in detail.The reaction cross section for collision energies above 1 eV increases significantly with the increasing of the vibrational excitation of H$_2^+$($v'$), for values up to $v'$=6. The total reaction cross section (including the double fragmentation channel) obtained for $v'$=6 matches the new experimental results obtained by Savic, Schlemmer and Gerlich [Chem. Phys. Chem. 21 (13), 1429.1435(2020)]. The differences among several experimental setups, for collision energies above 1 eV, showing cross sections scattered/dispersed over a rather wide interval, can be explained by the differences in the vibrational excitations obtained in the formation of H$_2^+$ reactants. On the contrary, for collision energies below 1 eV, the cross section is determined by the long range behavior of the potential and do not depend strongly on the vibrational state of H$_2^+$. In addition in this study, the calculated reaction cross sections are used in a plasma model and compared with previous results. We conclude that the efficiency of the formation of H$_3^+$ in the plasma is affected by the potential energy surface used.
△ Less
Submitted 3 March, 2023;
originally announced March 2023.
-
Status and performance of the AMoRE-I experiment on neutrinoless double beta decay
Authors:
H. B. Kim,
D. H. Ha,
E. J. Jeon,
J. A. Jeon,
H. S. Jo,
C. S. Kang,
W. G. Kang,
H. S. Kim,
S. C. Kim,
S. G. Kim,
S. K. Kim,
S. R. Kim,
W. T. Kim,
Y. D. Kim,
Y. H. Kim,
D. H. Kwon,
E. S. Lee,
H. J. Lee,
H. S. Lee,
J. S. Lee,
M. H. Lee,
S. W. Lee,
Y. C. Lee,
D. S. Leonard,
H. S. Lim
, et al. (10 additional authors not shown)
Abstract:
AMoRE is an international project to search for the neutrinoless double beta decay of $^{100}$Mo using a detection technology consisting of magnetic microcalorimeters (MMCs) and molybdenum-based scintillating crystals. Data collection has begun for the current AMORE-I phase of the project, an upgrade from the previous pilot phase. AMoRE-I employs thirteen $^\mathrm{48depl.}$Ca$^{100}$MoO$_4$ cryst…
▽ More
AMoRE is an international project to search for the neutrinoless double beta decay of $^{100}$Mo using a detection technology consisting of magnetic microcalorimeters (MMCs) and molybdenum-based scintillating crystals. Data collection has begun for the current AMORE-I phase of the project, an upgrade from the previous pilot phase. AMoRE-I employs thirteen $^\mathrm{48depl.}$Ca$^{100}$MoO$_4$ crystals and five Li$_2$$^{100}$MoO$_4$ crystals for a total crystal mass of 6.2 kg. Each detector module contains a scintillating crystal with two MMC channels for heat and light detection. We report the present status of the experiment and the performance of the detector modules.
△ Less
Submitted 5 November, 2022;
originally announced November 2022.
-
A lab scale experiment for keV sterile neutrino search
Authors:
Y. C. Lee,
H. B. Kim,
H. L. Kim,
S. K. Kim,
Y. H. Kim,
D. H. Kwon,
H. S. Lim,
H. S. Park,
K. R. Woo,
Y. S. Yoon
Abstract:
We developed a simple small-scale experiment to measure the beta decay spectrum of $^{3}$H. The aim of this research is to investigate the presence of sterile neutrinos in the keV region. Tritium nuclei were embedded in a 1$\times$1$\times$1 cm$^3$ LiF crystal from the $^6$Li(n,$α$)$^3$H reaction. The energy of the beta electrons absorbed in the LiF crystal was measured with a magnetic microcalori…
▽ More
We developed a simple small-scale experiment to measure the beta decay spectrum of $^{3}$H. The aim of this research is to investigate the presence of sterile neutrinos in the keV region. Tritium nuclei were embedded in a 1$\times$1$\times$1 cm$^3$ LiF crystal from the $^6$Li(n,$α$)$^3$H reaction. The energy of the beta electrons absorbed in the LiF crystal was measured with a magnetic microcalorimeter at 40 mK. We report a new method of sample preparation, experiments, and analysis of $^3$H beta measurements. The spectrum of a 10-hour measurement agrees well with the expected spectrum of $^3$H beta decay. The analysis results indicate that this method can be used to search for keV-scale sterile neutrinos.
△ Less
Submitted 21 October, 2022; v1 submitted 20 October, 2022;
originally announced October 2022.
-
Reflectarrays and metasurface reflectors as diffraction gratings
Authors:
Fu Liu,
Do-Hoon Kwon,
Sergei A. Tretyakov
Abstract:
Reconfigurable reflectors have a significant potential in future telecommunication systems, and approaches to the design and realization of full and tunable reflection control are now actively studied. Reflectarrays, being the classical approach to realization of scanning reflectors, are based on the phased-array theory (the so-called generalized reflection law) and the physical optics approximati…
▽ More
Reconfigurable reflectors have a significant potential in future telecommunication systems, and approaches to the design and realization of full and tunable reflection control are now actively studied. Reflectarrays, being the classical approach to realization of scanning reflectors, are based on the phased-array theory (the so-called generalized reflection law) and the physical optics approximation of the reflection response. To overcome the limitations of the reflectarray technology, researchers actively study inhomogeneous metasurfaces, using the theory of diffraction gratings. In order to make these devices tunable and fully realize their potential, it is necessary to unify the two approaches and study reconfigurable reflectors from a unified point of view. Here, we offer a basic tutorial on reflectarrays and reflecting metasufaces, explaining their common fundamental properties that stem from the diffraction theory. This tutorial is suitable for graduate and post-graduate students and hopefully will help to develop more deeper understanding of both phased arrays and diffraction gratings.
△ Less
Submitted 22 February, 2022; v1 submitted 18 February, 2022;
originally announced February 2022.
-
Pulse-Width Modulation Neuron Implemented by Single Positive-Feedback Device
Authors:
Sung Yun Woo,
Dongseok Kwon,
Byung-Gook Park,
Jong-Ho Lee,
Jong-Ho Bae
Abstract:
Positive-feedback (PF) device and its operation scheme to implement pulse width modulation (PWM) function was proposed and demonstrated, and the device operation mechanism for implementing PWM function was analyzed. By adjusting the amount of the charge stored in the n- floating body (Qn), the potential of the floating body linearly changes with time. When Qn reaches to a threshold value (Qth), th…
▽ More
Positive-feedback (PF) device and its operation scheme to implement pulse width modulation (PWM) function was proposed and demonstrated, and the device operation mechanism for implementing PWM function was analyzed. By adjusting the amount of the charge stored in the n- floating body (Qn), the potential of the floating body linearly changes with time. When Qn reaches to a threshold value (Qth), the PF device turns on abruptly. From the linear time-varying property of Qn and the gate bias dependency of Qth, fully functionable PWM neuron properties including voltage to pulse width conversion and hard-sigmoid activation function were successfully obtained from a single PF device. A PWM neuron can be implemented by using a single PF device, thus it is beneficial to extremely reduce the area of a PWM neuron circuit than the previously reported one.
△ Less
Submitted 23 August, 2021;
originally announced August 2021.
-
Alpha backgrounds in the AMoRE-Pilot experiment
Authors:
V. Alenkov,
H. W. Bae,
J. Beyer,
R. S. Boiko,
K. Boonin,
O. Buzanov,
N. Chanthima,
M. K. Cheoun,
S. H. Choi,
F. A. Danevich,
M. Djamal,
D. Drung,
C. Enss,
A. Fleischmann,
A. Gangapshev,
L. Gastaldo,
Yu. M. Gavriljuk,
A. Gezhaev,
V. D. Grigoryeva,
V. Gurentsov,
D. H. Ha,
C. Ha,
E. J. Ha,
I. Hahn,
E. J. Jeon
, et al. (81 additional authors not shown)
Abstract:
The Advanced Mo-based Rare process Experiment (AMoRE)-Pilot experiment is an initial phase of the AMoRE search for neutrinoless double beta decay of $^{100}$Mo, with the purpose of investigating the level and sources of backgrounds. Searches for neutrinoless double beta decay generally require ultimately low backgrounds. Surface $α$ decays on the crystals themselves or nearby materials can deposit…
▽ More
The Advanced Mo-based Rare process Experiment (AMoRE)-Pilot experiment is an initial phase of the AMoRE search for neutrinoless double beta decay of $^{100}$Mo, with the purpose of investigating the level and sources of backgrounds. Searches for neutrinoless double beta decay generally require ultimately low backgrounds. Surface $α$ decays on the crystals themselves or nearby materials can deposit a continuum of energies that can be as high as the $Q$-value of the decay itself and may fall in the region of interest (ROI). To understand these background events, we studied backgrounds from radioactive contaminations internal to and on the surface of the crystals or nearby materials with Geant4-based Monte Carlo simulations. In this study, we report on the measured $α$ energy spectra fitted with the corresponding simulated spectra for six crystal detectors, where sources of background contributions could be identified through high energy $α$ peaks and continuum parts in the energy spectrum for both internal and surface contaminations. We determine the low-energy contributions from internal and surface $α$ contaminations by extrapolating from the $α$ background fitting model.
△ Less
Submitted 5 December, 2022; v1 submitted 16 July, 2021;
originally announced July 2021.
-
Photonic flywheel in a monolithic fiber resonator
Authors:
Kunpeng Jia,
Xiaohan Wang,
Dohyeon Kwon,
Jiarong Wang,
Eugene Tsao,
Huaying Liu,
Xin Ni,
Jian Guo,
Mufan Yang,
Xiaoshun Jiang,
Jungwon Kim,
Shi-ning Zhu,
Zhenda Xie,
Shu-Wei Huang
Abstract:
We demonstrate the first compact photonic flywheel with sub-fs time jitter (averaging times up to 10 μs) at the quantum-noise limit of a monolithic fiber resonator. Such quantum-limited performance is accessed through novel two-step pumping scheme for dissipative Kerr soliton (DKS) generation. Controllable interaction between stimulated Brillouin lasing and Kerr nonlinearity enhances the DKS coher…
▽ More
We demonstrate the first compact photonic flywheel with sub-fs time jitter (averaging times up to 10 μs) at the quantum-noise limit of a monolithic fiber resonator. Such quantum-limited performance is accessed through novel two-step pumping scheme for dissipative Kerr soliton (DKS) generation. Controllable interaction between stimulated Brillouin lasing and Kerr nonlinearity enhances the DKS coherence and mitigate the thermal instability challenge, achieving a remarkable 22-Hz intrinsic comb linewidth and an unprecedented phase noise of -180 dBc/Hz at 945 MHz carrier at free running. The scheme can be generalized to various device platforms for field-deployable precision metrology.
△ Less
Submitted 14 August, 2020;
originally announced August 2020.
-
One nanometer HfO$_2$-based ferroelectric tunnel junctions on silicon
Authors:
Suraj S. Cheema,
Nirmaan Shanker,
Cheng-Hsiang Hsu,
Adhiraj Datar,
Jongho Bae,
Daewoong Kwon,
Sayeef Salahuddin
Abstract:
In ferroelectric materials, spontaneous symmetry breaking leads to a switchable electric polarization, which offers significant promise for nonvolatile memories. In particular, ferroelectric tunnel junctions (FTJs) have emerged as a new resistive switching memory which exploit polarization-dependent tunnel current across a thin ferroelectric barrier. Here we demonstrate FTJs with CMOS-compatible Z…
▽ More
In ferroelectric materials, spontaneous symmetry breaking leads to a switchable electric polarization, which offers significant promise for nonvolatile memories. In particular, ferroelectric tunnel junctions (FTJs) have emerged as a new resistive switching memory which exploit polarization-dependent tunnel current across a thin ferroelectric barrier. Here we demonstrate FTJs with CMOS-compatible Zr-doped HfO$_2$ (Zr:HfO$_2$) ferroelectric barriers of just 1 nm thickness, grown by atomic layer deposition on silicon. These 1 nm Zr:HfO$_2$ tunnel junctions exhibit large polarization-driven electroresistance (19000$\%$), the largest value reported for HfO$_2$-based FTJs. In addition, due to just a 1 nm ferroelectric barrier, these junctions provide large tunnel current (> 1 A/cm$^2$) at low read voltage, orders of magnitude larger than reported thicker HfO$_2$-based FTJs. Therefore, our proof-of-principle demonstration provides an approach to simultaneously overcome three major drawbacks of prototypical FTJs: a Si-compatible ultrathin ferroelectric, large electroresistance, and large read current for high-speed operation.
△ Less
Submitted 13 July, 2020;
originally announced July 2020.
-
Anomalous Subthreshold Behaviors in Negative Capacitance Transistors
Authors:
Yu-Hung Liao,
Daewoong Kwon,
Suraj Cheema,
Ava J. Tan,
Ming-Yen Kao,
Li-Chen Wang,
Chenming Hu,
Sayeef Salahuddin
Abstract:
Recent measurements on ultra-thin body Negative Capacitance Field Effect Transistors have shown subthreshold behaviors that are not expected in a classical MOSFET. Specifically, subthreshold swing was found to decrease with increased gate bias in the subthreshold region for devices measured over multiple gate lengths down to 30 nm. In addition, improvement in the subthreshold swing relative to con…
▽ More
Recent measurements on ultra-thin body Negative Capacitance Field Effect Transistors have shown subthreshold behaviors that are not expected in a classical MOSFET. Specifically, subthreshold swing was found to decrease with increased gate bias in the subthreshold region for devices measured over multiple gate lengths down to 30 nm. In addition, improvement in the subthreshold swing relative to control devices showed a non-monotonic dependence on the gate length. In this paper, using a Landau-Khanatnikov ferroelectric gate stack model calibrated with measured Capacitance-Voltage, we show that both these anomalous behaviors can be quantitatively reproduced with TCAD simulations.
△ Less
Submitted 3 June, 2020;
originally announced June 2020.
-
A multi-functional reconfigurable metasurface: Electromagnetic design accounting for fabrication aspects
Authors:
Alexandros Pitilakis,
Odysseas Tsilipakos,
Fu Liu,
Kypros M. Kossifos,
Anna C. Tasolamprou,
Do-Hoon Kwon,
Mohammad Sajjad Mirmoosa,
Dionysios Manessis,
Nikolaos V. Kantartzis,
Christos Liaskos,
Marco A. Antoniades,
Julius Georgiou,
Costas M. Soukoulis,
Maria Kafesaki,
Sergei A. Tretyakov
Abstract:
In this paper we present the theoretical considerations and the design evolution of a proof-of-concept reconfigurable metasurface, primarily used as a tunable microwave absorber, but also as a wavefront manipulation and polarization conversion device in reflection. We outline the design evolution and all considerations taken into account, from the selection of patch shape, unit cell size, and subs…
▽ More
In this paper we present the theoretical considerations and the design evolution of a proof-of-concept reconfigurable metasurface, primarily used as a tunable microwave absorber, but also as a wavefront manipulation and polarization conversion device in reflection. We outline the design evolution and all considerations taken into account, from the selection of patch shape, unit cell size, and substrate, to the topology of the structure that realizes the desired tunability. The presented design conforms to fabrication restrictions and is co-designed to work with an integrated circuit chip for providing tunable complex loads to the metasurface, using a commercially available semiconductor process. The proposed structure can perform multiple tunable functionalities by appropriately biasing the integrated circuit: Perfect absorption for a wide range of incidence angles of both linear polarization states, accommodating a spectral range in the vicinity of 5 GHz, with potential also for wavefront control, exemplified via anomalous reflection and polarization conversion. The end vision is for such a design to be scalable and deployable as a practical HyperSurface, i.e., an intelligent multi-functional metasurface capable of concurrent reconfigurable functionalities: absorption, beam steering, polarization conversion, wavefront shaping, holography, and sensing.
△ Less
Submitted 4 September, 2020; v1 submitted 19 March, 2020;
originally announced March 2020.
-
Deep neural network Grad-Shafranov solver constrained with measured magnetic signals
Authors:
Semin Joung,
Jaewook Kim,
Sehyun Kwak,
J. G. Bak,
S. G. Lee,
H. S. Han,
H. S. Kim,
Geunho Lee,
Daeho Kwon,
Y. -c. Ghim
Abstract:
A neural network solving Grad-Shafranov equation constrained with measured magnetic signals to reconstruct magnetic equilibria in real time is developed. Database created to optimize the neural network's free parameters contain off-line EFIT results as the output of the network from $1,118$ KSTAR experimental discharges of two different campaigns. Input data to the network constitute magnetic sign…
▽ More
A neural network solving Grad-Shafranov equation constrained with measured magnetic signals to reconstruct magnetic equilibria in real time is developed. Database created to optimize the neural network's free parameters contain off-line EFIT results as the output of the network from $1,118$ KSTAR experimental discharges of two different campaigns. Input data to the network constitute magnetic signals measured by a Rogowski coil (plasma current), magnetic pick-up coils (normal and tangential components of magnetic fields) and flux loops (poloidal magnetic fluxes). The developed neural networks fully reconstruct not only the poloidal flux function $ψ\left( R, Z\right)$ but also the toroidal current density function $j_φ\left( R, Z\right)$ with the off-line EFIT quality. To preserve robustness of the networks against a few missing input data, an imputation scheme is utilized to eliminate the required additional training sets with large number of possible combinations of the missing inputs.
△ Less
Submitted 7 November, 2019;
originally announced November 2019.
-
Electromagnetic Aspects of Practical Approaches to Realization of Intelligent Metasurfaces
Authors:
Fu Liu,
Odysseas Tsilipakos,
Xuchen Wang,
Alexandros Pitilakis,
Anna C. Tasolamprou,
Mohammad Sajjad Mirmoosa,
Do-Hoon Kwon,
Kypros Kossifos,
Julius Georgiou,
Maria Kafesaki,
Costas M. Soukoulis,
Sergei A. Tretyakov
Abstract:
We thoroughly investigate the electromagnetic response of intelligent functional metasurfaces. We study two distinct designs operating at different frequency regimes, namely, a switch-fabric-based design for GHz frequencies and a graphene-based approach for THz band, and discuss the respective practical design considerations. The performance for tunable perfect absorption applications is assessed…
▽ More
We thoroughly investigate the electromagnetic response of intelligent functional metasurfaces. We study two distinct designs operating at different frequency regimes, namely, a switch-fabric-based design for GHz frequencies and a graphene-based approach for THz band, and discuss the respective practical design considerations. The performance for tunable perfect absorption applications is assessed in both cases.
△ Less
Submitted 2 April, 2019;
originally announced April 2019.
-
Tunable Perfect Anomalous Reflection in Metasurfaces with Capacitive Lumped Elements
Authors:
Odysseas Tsilipakos,
Fu Liu,
Alexandros Pitilakis,
Anna C. Tasolamprou,
Do-Hoon Kwon,
Mohammad Sajjad Mirmoosa,
Nikolaos V. Kantartzis,
Eleftherios N. Economou,
Maria Kafesaki,
Costas M. Soukoulis,
Sergei A. Tretyakov
Abstract:
We demonstrate tunable perfect anomalous reflection with metasurfaces incorporating lumped elements. The tunable capacitance of each element provides continuous control over the local surface reactance, allowing for controlling the evanescent field distribution and efficiently tilting the reflected wavefront away from the specular direction. The performance of the metasurface is evaluated for both…
▽ More
We demonstrate tunable perfect anomalous reflection with metasurfaces incorporating lumped elements. The tunable capacitance of each element provides continuous control over the local surface reactance, allowing for controlling the evanescent field distribution and efficiently tilting the reflected wavefront away from the specular direction. The performance of the metasurface is evaluated for both TE and TM polarization and for reflection to the first and second diffraction order.
△ Less
Submitted 1 April, 2019;
originally announced April 2019.
-
First Results from the AMoRE-Pilot neutrinoless double beta decay experiment
Authors:
V. Alenkov,
H. W. Bae,
J. Beyer,
R. S. Boiko,
K. Boonin,
O. Buzanov,
N. Chanthima,
M. K. Cheoun,
D. M. Chernyak,
J. S. Choe,
S. Choi,
F. A. Danevich,
M. Djamal,
D. Drung,
C. Enss,
A. Fleischmann,
A. M. Gangapshev,
L. Gastaldo,
Yu. M. Gavriljuk,
A. M. Gezhaev,
V. D. Grigoryeva,
V. I. Gurentsov,
O. Gylova,
C. Ha,
D. H. Ha
, et al. (84 additional authors not shown)
Abstract:
The Advanced Molybdenum-based Rare process Experiment (AMoRE) aims to search for neutrinoless double beta decay (0$νββ$) of $^{100}$Mo with $\sim$100 kg of $^{100}$Mo-enriched molybdenum embedded in cryogenic detectors with a dual heat and light readout. At the current, pilot stage of the AMoRE project we employ six calcium molybdate crystals with a total mass of 1.9 kg, produced from $^{48}$Ca-de…
▽ More
The Advanced Molybdenum-based Rare process Experiment (AMoRE) aims to search for neutrinoless double beta decay (0$νββ$) of $^{100}$Mo with $\sim$100 kg of $^{100}$Mo-enriched molybdenum embedded in cryogenic detectors with a dual heat and light readout. At the current, pilot stage of the AMoRE project we employ six calcium molybdate crystals with a total mass of 1.9 kg, produced from $^{48}$Ca-depleted calcium and $^{100}$Mo-enriched molybdenum ($^{48\textrm{depl}}$Ca$^{100}$MoO$_4$). The simultaneous detection of heat(phonon) and scintillation (photon) signals is realized with high resolution metallic magnetic calorimeter sensors that operate at milli-Kelvin temperatures. This stage of the project is carried out in the Yangyang underground laboratory at a depth of 700 m. We report first results from the AMoRE-Pilot $0νββ$ search with a 111 kg$\cdot$d live exposure of $^{48\textrm{depl}}$Ca$^{100}$MoO$_4$ crystals. No evidence for $0νββ$ decay of $^{100}$Mo is found, and a upper limit is set for the half-life of 0$νββ$ of $^{100}$Mo of $T^{0ν}_{1/2} > 9.5\times10^{22}$ y at 90% C.L.. This limit corresponds to an effective Majorana neutrino mass limit in the range $\langle m_{ββ}\rangle\le(1.2-2.1)$ eV.
△ Less
Submitted 7 May, 2019; v1 submitted 22 March, 2019;
originally announced March 2019.
-
Intelligent Metasurfaces with Continuously Tunable Local Surface Impedance for Multiple Reconfigurable Functions
Authors:
Fu Liu,
Odysseas Tsilipakos,
Alexandros Pitilakis,
Anna C. Tasolamprou,
Mohammad Sajjad Mirmoosa,
Nikolaos V. Kantartzis,
Do-Hoon Kwon,
Maria Kafesaki,
Costas M. Soukoulis,
Sergei A. Tretyakov
Abstract:
Electromagnetic metasurfaces can be characterized as intelligent if they are able to perform multiple tunable functions, with the desired response being controlled by a computer influencing the individual electromagnetic properties of each metasurface inclusion. In this paper, we present an example of an intelligent metasurface which operates in the reflection mode in the microwave frequency range…
▽ More
Electromagnetic metasurfaces can be characterized as intelligent if they are able to perform multiple tunable functions, with the desired response being controlled by a computer influencing the individual electromagnetic properties of each metasurface inclusion. In this paper, we present an example of an intelligent metasurface which operates in the reflection mode in the microwave frequency range. We numerically show that without changing the main body of the metasurface we can achieve tunable perfect absorption and tunable anomalous reflection. The tunability features can be implemented using mixed-signal integrated circuits (ICs), which can independently vary both the resistance and reactance, offering complete local control over the complex surface impedance. The ICs are embedded in the unit cells by connecting two metal patches over a thin grounded substrate and the reflection property of the intelligent metasurface can be readily controlled by a computer. Our intelligent metasurface can have significant influence on future space-time modulated metasurfaces and a multitude of applications, such as beam steering, energy harvesting, and communications.
△ Less
Submitted 10 April, 2019; v1 submitted 25 November, 2018;
originally announced November 2018.
-
Multi-Channel Reflectors: Versatile Performance Experimentally Tested
Authors:
S. N. Tcvetkova,
V. S. Asadchy,
A. Diaz-Rubio,
D. -H. Kwon,
S. A. Tretyakov
Abstract:
We investigate multi-channel reflectors, such as a three-channel power splitter and a five-channel isolating mirror. These metasurface reflectors are able to control reflections from and into several directions while possessing a flat surface. We design, fabricate, and experimentally study these new devices, confirming that the performance is nearly perfect.
We investigate multi-channel reflectors, such as a three-channel power splitter and a five-channel isolating mirror. These metasurface reflectors are able to control reflections from and into several directions while possessing a flat surface. We design, fabricate, and experimentally study these new devices, confirming that the performance is nearly perfect.
△ Less
Submitted 29 January, 2018;
originally announced January 2018.
-
Functional metasurfaces: Do we need normal polarizations?
Authors:
Sergei A. Tretyakov,
Do-Hoon Kwon,
Mohammad Albooyeh,
Filippo Capolino
Abstract:
We consider reciprocal metasurfaces with engineered reflection and transmission coefficients and study the role of normal (with respect to the metasurface plane) electric and magnetic polarizations on the possibilities to shape the reflection and transmission responses. We demonstrate in general and on a representative example that the presence of normal components of the polarization vectors does…
▽ More
We consider reciprocal metasurfaces with engineered reflection and transmission coefficients and study the role of normal (with respect to the metasurface plane) electric and magnetic polarizations on the possibilities to shape the reflection and transmission responses. We demonstrate in general and on a representative example that the presence of normal components of the polarization vectors does not add extra degrees of freedom in engineering the reflection and transmission characteristics of metasurfaces. Furthermore, we discuss advantages and disadvantages of equivalent volumetric and fully planar realizations of the same properties of functional metasurfaces.
△ Less
Submitted 10 January, 2018;
originally announced January 2018.
-
Transmission magnitude and phase control for polarization-preserving reflectionless metasurfaces
Authors:
Do-Hoon Kwon,
Grigorii Ptitcyn,
Ana Díaz-Rubio,
Sergei A. Tretyakov
Abstract:
For transmissive applications of electromagnetic metasurfaces, an array of subwavelength Huygens' metaatoms are typically used to eliminate reflection and achieve a high transmission power efficiency together with a wide transmission phase coverage. We show that the underlying principle of low reflection and full control over transmission is asymmetric scattering into the specular reflection and t…
▽ More
For transmissive applications of electromagnetic metasurfaces, an array of subwavelength Huygens' metaatoms are typically used to eliminate reflection and achieve a high transmission power efficiency together with a wide transmission phase coverage. We show that the underlying principle of low reflection and full control over transmission is asymmetric scattering into the specular reflection and transmission directions that results from a superposition of symmetric and anti-symmetric scattering components, with Huygens' meta-atoms being one example configuration. Available for oblique illumination in TM polarization, a meta-atom configuration comprising normal and tangential electric polarizations is presented, which is capable of reflectionless, fullpower transmission and a $2π$ transmission phase coverage as well as full absorption. For lossy metasurfaces, we show that a complete phase coverage is still available for reflectionless designs for any value of absorptance. Numerical examples in the microwave and optical regimes are provided.
△ Less
Submitted 30 January, 2018; v1 submitted 10 October, 2017;
originally announced October 2017.
-
Arbitrary beam control using passive lossless metasurfaces enabled by orthogonally-polarized custom surface waves
Authors:
Do-Hoon Kwon,
Sergei A. Tretyakov
Abstract:
For passive, lossless impenetrable metasurfaces, a design technique for arbitrary beam control of receiving, guiding, and launching is presented. Arbitrary control is enabled by a custom surface wave in an orthogonal polarization such that its addition to the incident (input) and the desired scattered (output) fields is supported by a reactive surface impedance everywhere on the reflecting surface…
▽ More
For passive, lossless impenetrable metasurfaces, a design technique for arbitrary beam control of receiving, guiding, and launching is presented. Arbitrary control is enabled by a custom surface wave in an orthogonal polarization such that its addition to the incident (input) and the desired scattered (output) fields is supported by a reactive surface impedance everywhere on the reflecting surface. Such a custom surface wave (SW) takes the form of an evanescent wave propagating along the surface with a spatially varying envelope. A growing SW appears when an illuminating beam is received. The SW amplitude stays constant when power is guided along the surface. The amplitude diminishes as a propagating wave (PW) is launched from the surface as a leaky wave. The resulting reactive tensor impedance profile may be realized as an array of anisotropic metallic resonators printed on a grounded dielectric substrate. Illustrative design examples of a Gaussian beam translator-reflector, a probe-fed beam launcher, and a near-field focusing lens are provided.
△ Less
Submitted 30 January, 2018; v1 submitted 9 October, 2017;
originally announced October 2017.
-
Near-Perfect Conversion of a Propagating Plane Wave into a Surface Wave Using Metasurfaces
Authors:
Svetlana N. Tcvetkova,
Do-Hoon Kwon,
Ana Díaz-Rubio,
Sergei A. Tretyakov
Abstract:
In this paper, theoretical and numerical studies of perfect/nearly-perfect conversion of a plane wave into a surface wave are presented. The problem of determining the electromagnetic properties of an inhomogeneous lossless boundary which would fully transform an incident plane wave into a surface wave propagating along the boundary is considered. An approximate field solution which produces a slo…
▽ More
In this paper, theoretical and numerical studies of perfect/nearly-perfect conversion of a plane wave into a surface wave are presented. The problem of determining the electromagnetic properties of an inhomogeneous lossless boundary which would fully transform an incident plane wave into a surface wave propagating along the boundary is considered. An approximate field solution which produces a slowly growing surface wave and satisfies the energy conservation law is discussed and numerically demonstrated. The results of the study are of great importance for the future development of such devices as perfect leaky-wave antennas and can potentially lead to many novel applications.
△ Less
Submitted 31 March, 2018; v1 submitted 22 June, 2017;
originally announced June 2017.
-
Ultrasensitive, high-dynamic-range and broadband strain sensing by time-of-flight detection with femtosecond-laser frequency combs
Authors:
Xing Lu,
Shuangyou Zhang,
Xing Chen,
Dohyeon Kwon,
Chan-Gi Jeon,
Zhigang Zhang,
Jungwon Kim,
Kebin Shi
Abstract:
Ultrahigh-resolution optical strain sensors provide powerful tools in various scientific and engineering fields, ranging from long-baseline interferometers to civil and aerospace industries. Here we demonstrate an ultrahigh-resolution fibre strain sensing method by directly detecting the time-of-flight (TOF) change of the optical pulse train generated from a free-running passively mode-locked lase…
▽ More
Ultrahigh-resolution optical strain sensors provide powerful tools in various scientific and engineering fields, ranging from long-baseline interferometers to civil and aerospace industries. Here we demonstrate an ultrahigh-resolution fibre strain sensing method by directly detecting the time-of-flight (TOF) change of the optical pulse train generated from a free-running passively mode-locked laser (MLL) frequency comb. We achieved a local strain resolution of 18 pε/Hz1/2 and 1.9 pε/Hz1/2 at 1 Hz and 3 kHz, respectively, with largedynamic range of >154 dB at 3 kHz. For remote-point sensing at 1-km distance, 80 pε/Hz1/2 (at 1 Hz) and 2.2 pε/Hz1/2 (at 3 kHz) resolution is demonstrated. While attaining both ultrahigh resolution and large dynamic range, the demonstrated method can be readily extended for multiple-point sensing as well by taking advantage of the broad optical comb spectra. These advantages may allow various applications of this sensor in geophysical science, structural health monitoring, and underwater science.
△ Less
Submitted 20 June, 2017;
originally announced June 2017.
-
Flat Engineered Multi-Channel Reflectors
Authors:
V. S. Asadchy,
A. Diaz-Rubio,
S. N. Tcvetkova,
D. -H. Kwon,
A. Elsakka,
M. Albooyeh,
S. A. Tretyakov
Abstract:
Recent advances in engineered gradient metasurfaces have enabled unprecedented opportunities for light manipulation using optically thin sheets, such as anomalous refraction, reflection, or focusing of an incident beam. Here we introduce a concept of multi-channel functional metasurfaces, which are able to control incoming and outgoing waves in a number of propagation directions simultaneously. In…
▽ More
Recent advances in engineered gradient metasurfaces have enabled unprecedented opportunities for light manipulation using optically thin sheets, such as anomalous refraction, reflection, or focusing of an incident beam. Here we introduce a concept of multi-channel functional metasurfaces, which are able to control incoming and outgoing waves in a number of propagation directions simultaneously. In particular, we reveal a possibility to engineer multi-channel reflectors. Under the assumption of reciprocity and energy conservation, we find that there exist three basic functionalities of such reflectors: Specular, anomalous, and retro reflections. Multi-channel response of a general flat reflector can be described by a combination of these functionalities. To demonstrate the potential of the introduced concept, we design and experimentally test three different multi-channel reflectors: Three- and five-channel retro-reflectors and a three-channel power splitter. Furthermore, by extending the concept to reflectors supporting higher-order Floquet harmonics, we forecast the emergence of other multiple-channel flat devices, such as isolating mirrors, complex splitters, and multi-functional gratings.
△ Less
Submitted 27 June, 2017; v1 submitted 15 October, 2016;
originally announced October 2016.
-
Fe$^{\bf{15+}}$ dielectronic recombination and the effects of configuration interaction between resonances with different captured electron principal quantum number
Authors:
Duck-Hee Kwon,
Daniel Wolf Savin
Abstract:
Dielectronic recombination (DR) of Na-like Fe$^{15+}$ forming Mg-like Fe$^{14+}$ via excitation of a $2l$ core electron has been investigated. We find that configuration interaction (CI) between DR resonances with different captured electron principal quantum numbers $n$ can lead to a significant reduction in resonance strengths for $n \geq 5$. Previous theoretical work for this system has not con…
▽ More
Dielectronic recombination (DR) of Na-like Fe$^{15+}$ forming Mg-like Fe$^{14+}$ via excitation of a $2l$ core electron has been investigated. We find that configuration interaction (CI) between DR resonances with different captured electron principal quantum numbers $n$ can lead to a significant reduction in resonance strengths for $n \geq 5$. Previous theoretical work for this system has not considered this form of CI. Including it accounts for most of the discrepancy between previous theoretical and experimental results.
△ Less
Submitted 24 November, 2010;
originally announced November 2010.
-
Comment on "Negative Refractive Index in Artificial Metamaterials" [A. N. Grigorenko, Opt. Lett., 31, 2483 (2006)]
Authors:
Alexander V. Kildishev,
Vladimir P. Drachev,
Uday K. Chettiar,
Douglas Werner,
Do-Hoon Kwon,
Vladimir M. Shalaev
Abstract:
A key optical parameter characterizing the existence of negative refraction in a thin layer of a composite material is the effective refractive index of an equivalent, homogenized layer with the same physical thickness as the initial inhomogeneous composite. Measuring the complex transmission and reflection coefficients is one of the most rigorous ways to obtain this parameter. We dispute Grigor…
▽ More
A key optical parameter characterizing the existence of negative refraction in a thin layer of a composite material is the effective refractive index of an equivalent, homogenized layer with the same physical thickness as the initial inhomogeneous composite. Measuring the complex transmission and reflection coefficients is one of the most rigorous ways to obtain this parameter. We dispute Grigorenko's statement (Optics Letters 31, 2483 (2006)) that measuring only the reflection intensity spectrum is sufficient for determining the effective refractive index. We discuss fundamental drawbacks of Grigorenko's technique of using a best-fit approximation with an a priori prescribed dispersive behavior for a given metamaterial and an 'effective optical thickness' that is smaller than the actual thickness of the sample. Our simulations do not confirm the Grigorenko paper conclusions regarding the negative refractive index and the negative permeability of the nanopillar sample in the visible spectral range.
△ Less
Submitted 26 September, 2006;
originally announced September 2006.