Showing 1–50 of 105 results for author: Kim, G

Projected background and sensitivity of AMoRE-II

Authors: A. Agrawal, V. V. Alenkov, P. Aryal, J. Beyer, B. Bhandari, R. S. Boiko, K. Boonin, O. Buzanov, C. R. Byeon, N. Chanthima, M. K. Cheoun, J. S. Choe, Seonho Choi, S. Choudhury, J. S. Chung, F. A. Danevich, M. Djamal, D. Drung, C. Enss, A. Fleischmann, A. M. Gangapshev, L. Gastaldo, Y. M. Gavrilyuk, A. M. Gezhaev, O. Gileva , et al. (81 additional authors not shown)

Abstract: AMoRE-II aims to search for neutrinoless double beta decay with an array of 423 Li$_2$$^{100}$MoO$_4$ crystals operating in the cryogenic system as the main phase of the Advanced Molybdenum-based Rare process Experiment (AMoRE). AMoRE has been planned to operate in three phases: AMoRE-pilot, AMoRE-I, and AMoRE-II. AMoRE-II is currently being installed at the Yemi Underground Laboratory, located ap… ▽ More AMoRE-II aims to search for neutrinoless double beta decay with an array of 423 Li$_2$$^{100}$MoO$_4$ crystals operating in the cryogenic system as the main phase of the Advanced Molybdenum-based Rare process Experiment (AMoRE). AMoRE has been planned to operate in three phases: AMoRE-pilot, AMoRE-I, and AMoRE-II. AMoRE-II is currently being installed at the Yemi Underground Laboratory, located approximately 1000 meters deep in Jeongseon, Korea. The goal of AMoRE-II is to reach up to $T^{0νββ}_{1/2}$ $\sim$ 6 $\times$ 10$^{26}$ years, corresponding to an effective Majorana mass of 15 - 29 meV, covering all the inverted mass hierarchy regions. To achieve this, the background level of the experimental configurations and possible background sources of gamma and beta events should be well understood. We have intensively performed Monte Carlo simulations using the GEANT4 toolkit in all the experimental configurations with potential sources. We report the estimated background level that meets the 10$^{-4}$counts/(keV$\cdot$kg$\cdot$yr) requirement for AMoRE-II in the region of interest (ROI) and show the projected half-life sensitivity based on the simulation study. △ Less

Submitted 13 June, 2024; originally announced June 2024.

fastMRI Breast: A publicly available radial k-space dataset of breast dynamic contrast-enhanced MRI

Authors: Eddy Solomon, Patricia M. Johnson, Zhengguo Tan, Radhika Tibrewala, Yvonne W. Lui, Florian Knoll, Linda Moy, Sungheon Gene Kim, Laura Heacock

Abstract: This data curation work introduces the first large-scale dataset of radial k-space and DICOM data for breast DCE-MRI acquired in diagnostic breast MRI exams. Our dataset includes case-level labels indicating patient age, menopause status, lesion status (negative, benign, and malignant), and lesion type for each case. The public availability of this dataset and accompanying reconstruction code will… ▽ More This data curation work introduces the first large-scale dataset of radial k-space and DICOM data for breast DCE-MRI acquired in diagnostic breast MRI exams. Our dataset includes case-level labels indicating patient age, menopause status, lesion status (negative, benign, and malignant), and lesion type for each case. The public availability of this dataset and accompanying reconstruction code will support research and development of fast and quantitative breast image reconstruction and machine learning methods. △ Less

Submitted 7 June, 2024; originally announced June 2024.

Decay Energy Spectrometry for Improved Nuclear Material Analysis at the IAEA NML

Authors: G. B. Kim, A. R. L. Kavner, T. Parsons-Davis, S. Friedrich, O. B. Drury, D. Lee, X. Zhang, N. Hines, S. T. P. Boyd, S. Weidenbenner, K. Schreiber, S. Martinson, C. Smith, D. McNeel, S. Salazar, K. Koehler, M. Carpenter, M. Croce, D. Schmidt, J. Ullom

Abstract: Decay energy spectrometry (DES) is a novel radiometric technique for high-precision analysis of nuclear materials. DES employs the unique thermal detection physics of cryogenic microcalorimeters with ultra-high energy resolution and 100$\%$ detection efficiency to accomplish high precision decay energy measurements. Low-activity nuclear samples of 1 Bq or less, and without chemical separation, are… ▽ More Decay energy spectrometry (DES) is a novel radiometric technique for high-precision analysis of nuclear materials. DES employs the unique thermal detection physics of cryogenic microcalorimeters with ultra-high energy resolution and 100$\%$ detection efficiency to accomplish high precision decay energy measurements. Low-activity nuclear samples of 1 Bq or less, and without chemical separation, are used to provide elemental and isotopic compositions in a single measurement. Isotopic ratio precisions of 1 ppm - 1,000 ppm (isotope dependent), which is close to that of the mass spectrometry, have been demonstrated in 12-hour DES measurements of ~5 Bq samples of certified reference materials of uranium (U) and plutonium (Pu). DES has very different systematic biases and uncertainties, as well as different sensitivities to nuclides, compared to mass-spectrometry techniques. Therefore, the accuracy and confidence of nuclear material assays can be improved by combining this new technique with existing mass-spectrometry techniques. Commercial-level DES techniques and equipment are being developed for the implementation of DES at the Nuclear Material Laboratory (NML) of International Atomic Energy Agency (IAEA) to provide complementary measurements to the existing technologies. The paper describes details of DES measurement methods, as well as DES precision and accuracy to U and Pu standard sources to discuss its capability in analysis of nuclear safeguards samples. △ Less

Submitted 11 July, 2024; v1 submitted 7 June, 2024; originally announced June 2024.

Comments: This was submitted to 2022 IAEA symposium on nuclear safeguards (https://www.iaea.org/events/sg-2022), and posted at https://media.superevent.com/documents/20221027/668fdac0ee8d895ec6bcf293b1c42e6a/id-145.pdf

New Beam Dynamics Code for Cyclotron Analysis

Authors: G-H. Kim, H-J. Cho, B-H. Oh, G-R. Hahn, M. Chung, S. Park, S. Shin

Abstract: This paper describes the beam dynamic simulation with transfer matrix method for cyclotron. Starting from a description on the equation of motion in the cyclotron, lattice functions were determined from transfer matrix method and the solutions for the 2nd-order nonlinear Hamiltonian were introduced and used in phase space particle tracking. Based on the description of beam dynamics in the cyclotro… ▽ More This paper describes the beam dynamic simulation with transfer matrix method for cyclotron. Starting from a description on the equation of motion in the cyclotron, lattice functions were determined from transfer matrix method and the solutions for the 2nd-order nonlinear Hamiltonian were introduced and used in phase space particle tracking. Based on the description of beam dynamics in the cyclotron, simulation code was also developed for cyclotron design. △ Less

Submitted 19 January, 2024; originally announced January 2024.

Comments: arXiv admin note: substantial text overlap with arXiv:1807.01397

ExoMol line lists -- LVI: The SO line list, MARVEL analysis of experimental transition data and refinement of the spectroscopic model

Authors: Ryan P. Brady, Sergei N. Yurchenko, Jonathan Tennyson, Gap-Sue Kim

Abstract: A semi-empirical IR/Vis line list, SOLIS, for the sulphur monoxide molecule $^{32}$S$^{16}$O is presented. SOLIS includes accurate empirical rovibrational energy levels, uncertainties, lifetimes, quantum number assignments, and transition probabilities in the form of Einstein $A$ coefficients covering the $X\,{}^{3}Σ^{-}$, $a\,{}^{1}Δ^{ }$, $b\,{}^{1}Σ^{+}$, $A\,{}^{3}Π$, $B\,{}^{3}Σ^{-}$,… ▽ More A semi-empirical IR/Vis line list, SOLIS, for the sulphur monoxide molecule $^{32}$S$^{16}$O is presented. SOLIS includes accurate empirical rovibrational energy levels, uncertainties, lifetimes, quantum number assignments, and transition probabilities in the form of Einstein $A$ coefficients covering the $X\,{}^{3}Σ^{-}$, $a\,{}^{1}Δ^{ }$, $b\,{}^{1}Σ^{+}$, $A\,{}^{3}Π$, $B\,{}^{3}Σ^{-}$, $X\,{}^{\prime\prime3}Σ^{+}$, $A\,{}^{\prime 3}Δ$ and $e\,{}^{1}Π$ systems and wavenumber range up to 43303.5 cm$^{-1}$ ($\geq 230.93$ nm) with $J\le 69$. SOLIS has been computed by solving the rovibronic Schrödinger equation for diatomics using the general purpose variational code Duo and starting from a published ab initio spectroscopic model of SO (including potential energy curves, coupling curves, (transition) dipole moment curves) which is refined to experimental data. To this end, a database of 50106 experimental transitions, 48972 being non-redundant, has been compiled through the analysis of 29 experimental sources, and a self-consistent network of 8558 rovibronic energy levels for the $X$, $a$, $b$, $A$, $B$, and $C$ electronic states has been generated with the MARVEL algorithm covering rotational and vibrational quantum numbers $J \leq 69$ and $v \leq 30$ and energies up to 52350.40 cm$^{-1}$. No observed transitions connect to the $ B\,{}^{3}Σ^{-} (v = 0)$ state which is required to model perturbations correctly, so we leave fitting the $B\,{}^3Σ^-$ and $C\,{}^3Π$ state UV model to a future project. The SO line list is available at ExoMol from www.exomol.com. △ Less

Submitted 15 December, 2023; originally announced December 2023.

Comments: 16 pages, 12 figures

Journal ref: Monthly Notices of the Royal Astronomical Society, Volume 527, Issue 3, January 2024, Pages 6675-6690

The Data Acquisition System for Phase-III of the BeEST Experiment

Authors: C. Bray, S. Fretwell, I. Kim, W. K. Warburton, F. Ponce, K. G. Leach, S. Friedrich, R. Abells, P. Amaro, A. Andoche, R. Cantor, D. Diercks, M. Guerra, A. Hall, C. Harris, J. Harris, L. Hayen, P. A. Hervieux, G. B. Kim, A. Lennarz, V. Lordi, J. Machado, P. Machule, A. Marino, D. McKeen , et al. (5 additional authors not shown)

Abstract: The BeEST experiment is a precision laboratory search for physics beyond the standard model that measures the electron capture decay of $^7$Be implanted into superconducting tunnel junction (STJ) detectors. For Phase-III of the experiment, we constructed a continuously sampling data acquisition system to extract pulse shape and timing information from 16 STJ pixels offline. Four additional pixels… ▽ More The BeEST experiment is a precision laboratory search for physics beyond the standard model that measures the electron capture decay of $^7$Be implanted into superconducting tunnel junction (STJ) detectors. For Phase-III of the experiment, we constructed a continuously sampling data acquisition system to extract pulse shape and timing information from 16 STJ pixels offline. Four additional pixels are read out with a fast list-mode digitizer, and one with a nuclear MCA already used in the earlier limit-setting phases of the experiment. We present the performance of the data acquisition system and discuss the relative advantages of the different digitizers. △ Less

Submitted 20 November, 2023; originally announced November 2023.

Comments: 8 pages, 4 figures, proceedings for The 20th International Conference on Low Temperature Detectors

Highly tunable room-temperature plexcitons in monolayer WSe2 /gap-plasmon nanocavities

Authors: Thomas P. Darlington, Mahfujur Rahaman, Kevin W. C. Kwock, Emanuil Yanev, Xuehao Wu, Luke N. Holtzman, Madisen Holbrook, Gwangwoo Kim, Kyung Yeol Ma, Hyeon Suk Shin, Andrey Krayev, Matthew Strasbourg, Nicholas J. Borys, D. N. Basov, Katayun Barmak, James C. Hone, Abhay N. Pasupathy, Deep Jariwala, P. James Schuck

Abstract: The advancement of quantum photonic technologies relies on the ability to precisely control the degrees of freedom of optically active states. Here, we realize real-time, room-temperature tunable strong plasmon-exciton coupling in 2D semiconductor monolayers enabled by a general approach that combines strain engineering plus force- and voltage-adjustable plasmonic nanocavities. We show that the ex… ▽ More The advancement of quantum photonic technologies relies on the ability to precisely control the degrees of freedom of optically active states. Here, we realize real-time, room-temperature tunable strong plasmon-exciton coupling in 2D semiconductor monolayers enabled by a general approach that combines strain engineering plus force- and voltage-adjustable plasmonic nanocavities. We show that the exciton energy and nanocavity plasmon resonance can be controllably toggled in concert by applying pressure with a plasmonic nanoprobe, allowing in operando control of detuning and coupling strength, with observed Rabi splittings >100 meV. Leveraging correlated force spectroscopy, nano-photoluminescence (nano-PL) and nano-Raman measurements, augmented with electromagnetic simulations, we identify distinct polariton bands and dark polariton states, and map their evolution as a function of nanogap and strain tuning. Uniquely, the system allows for manipulation of coupling strength over a range of cavity parameters without dramatically altering the detuning. Further, we establish that the tunable strong coupling is robust under multiple pressing cycles and repeated experiments over multiple nanobubbles. Finally, we show that the nanogap size can be directly modulated via an applied DC voltage between the substrate and plasmonic tip, highlighting the inherent nature of the concept as a plexcitonic nano-electro-mechanical system (NEMS). Our work demonstrates the potential to precisely control and tailor plexciton states localized in monolayer (1L) transition metal dichalcogenides (TMDs), paving the way for on-chip polariton-based nanophotonic applications spanning quantum information processing to photochemistry. △ Less

Submitted 4 November, 2023; originally announced November 2023.

Comments: 17 pages, 4 figures

Contact holes in vertical electrode structures analyzed by voltage contrast-SEM and conducting AFM

Authors: Minsun Gu, Moon Seop Hyun, Moonsup Han, Gyungtae Kim, Young Jun Chang

Abstract: Soaring demands of multi-stacked memory devices request urgent development of backside contact electrode technologies, such as high aspect ratio etching, metallization, and inspection methods. Especially the complex metal contact process should be monitored for each manufacturing step to filter the defective samples and to maintain the high yield of production. Among the inspection methods for det… ▽ More Soaring demands of multi-stacked memory devices request urgent development of backside contact electrode technologies, such as high aspect ratio etching, metallization, and inspection methods. Especially the complex metal contact process should be monitored for each manufacturing step to filter the defective samples and to maintain the high yield of production. Among the inspection methods for detecting the electrical connections, there is voltage contrast (VC)-SEM and conducting AFM (C-AFM). In this report, we investigated the two inspection methods for testing designed samples with different contact hole states. The VC-SEM data shows the contrast variation at the contact holes, from which one may discern the contact status with an optimum voltage. The C-AFM results clearly demonstrate a finite electrical current in the connected contact, while a negligible current in the disconnected one. Finally, we discuss insights of using the two methods for analyzing the contact hole technologies with high aspect ratios. △ Less

Submitted 22 October, 2023; originally announced October 2023.

Comments: 17 pages, 4 figures

Journal ref: Current Applied Physics 53, 46 (2023)

Scalable and Stable Ferroelectric Non-Volatile Memory at > 500 $^\circ$C

Authors: Dhiren K. Pradhan, David C. Moore, Gwangwoo Kim, Yunfei He, Pariasadat Musavigharavi, Kwan-Ho Kim, Nishant Sharma, Zirun Han, Xingyu Du, Venkata S. Puli, Eric A. Stach, W. Joshua Kennedy, Nicholas R. Glavin, Roy H. Olsson III, Deep Jariwala

Abstract: Non-volatile memory (NVM) devices that reliably operate at temperatures above 300 $^\circ$C are currently non-existent and remains a critically unmet challenge in the development of high-temperature (T) resilient electronics, necessary for many emerging, complex computing and sensing in harsh environments. Ferroelectric Al$_x$Sc$_{1-x}$N exhibits strong potential for utilization in NVM devices ope… ▽ More Non-volatile memory (NVM) devices that reliably operate at temperatures above 300 $^\circ$C are currently non-existent and remains a critically unmet challenge in the development of high-temperature (T) resilient electronics, necessary for many emerging, complex computing and sensing in harsh environments. Ferroelectric Al$_x$Sc$_{1-x}$N exhibits strong potential for utilization in NVM devices operating at very high temperatures (> 500 $^\circ$C) given its stable and high remnant polarization (PR) above 100 $μ$C/cm$^2$ with demonstrated ferroelectric transition temperature (TC) > 1000 $^\circ$C. Here, we demonstrate an Al$_{0.68}$Sc$_{0.32}$N ferroelectric diode based NVM device that can reliably operate with clear ferroelectric switching up to 600 $^\circ$C with distinguishable On and Off states. The coercive field (EC) from the Pulsed I-V measurements is found to be -5.84 (EC-) and +5.98 (EC+) (+/- 0.1) MV/cm at room temperature (RT) and found to decrease with increasing temperature up to 600 $^\circ$C. The devices exhibit high remnant polarizations (> 100 $μ$C/cm$^2$) which are stable at high temperatures. At 500 $^\circ$C, our devices show 1 million read cycles and stable On-Off ratio above 1 for > 6 hours. Finally, the operating voltages of our AlScN ferrodiodes are < 15 V at 600 $^\circ$C which is well matched and compatible with Silicon Carbide (SiC) based high temperature logic technology, thereby making our demonstration a major step towards commercialization of NVM integrated high-T computers. △ Less

Submitted 8 September, 2023; originally announced September 2023.

Comments: MS and SI

MoS$_{2}$/Al$_{0.68}$Sc$_{0.32}$N negative capacitance field-effect transistors

Authors: Seunguk Song, Kwan-Ho Kim, Srikrishna Chakravarthi, Zirun Han, Gwangwoo Kim, Kyung Yeol Ma, Hyeon Suk Shin, Roy H. Olsson III, Deep Jariwala

Abstract: Al$_{0.68}$Sc$_{0.32}$N (AlScN) has gained attention for its outstanding ferroelectric properties, including a high coercive field and high remnant polarization. Although AlScN-based ferroelectric field-effect transistors (FETs) for memory applications have been demonstrated, a device for logic applications with minimal hysteresis has not been reported. This study reports on the transport characte… ▽ More Al$_{0.68}$Sc$_{0.32}$N (AlScN) has gained attention for its outstanding ferroelectric properties, including a high coercive field and high remnant polarization. Although AlScN-based ferroelectric field-effect transistors (FETs) for memory applications have been demonstrated, a device for logic applications with minimal hysteresis has not been reported. This study reports on the transport characteristics of a MoS$_{2}$ negative capacitance FET (NCFET) based on an AlScN ferroelectric material. We experimentally demonstrate the effect of a dielectric layer in the gate stack on the memory window and subthreshold swing (SS) of the NCFET. We show that the hysteresis behavior of transfer characteristics in the NCFET can be minimized with the inclusion of a non-ferroelectric dielectric layer, which fulfills the capacitance-matching condition. Remarkably, we also observe the NC effect in MoS$_{2}$/AlScN NCFETs arrays based on large-area monolayer MoS$_{2}$ synthesized by chemical vapor deposition, showing the SS values smaller than its thermionic limit (~36-60 mV/dec) and minimal variation in threshold voltages (< 20 mV). △ Less

Submitted 31 July, 2023; originally announced August 2023.

Comments: MS + SI

Exciton Confinement in Two-Dimensional, In-Plane, Quantum Heterostructures

Authors: Gwangwoo Kim, Benjamin Huet, Christopher E. Stevens, Kiyoung Jo, Jeng-Yuan Tsai, Saiphaneendra Bachu, Meghan Leger, Kyung Yeol Ma, Nicholas R. Glavin, Hyeon Suk Shin, Nasim Alem, Qimin Yan, Joshua R. Hedrickson, Joan M. Redwing, Deep Jariwala

Abstract: Two-dimensional (2D) semiconductors are promising candidates for optoelectronic application and quantum information processes due to their inherent out-of-plane 2D confinement. In addition, they offer the possibility of achieving low-dimensional in-plane exciton confinement, similar to zero-dimensional quantum dots, with intriguing optical and electronic properties via strain or composition engine… ▽ More Two-dimensional (2D) semiconductors are promising candidates for optoelectronic application and quantum information processes due to their inherent out-of-plane 2D confinement. In addition, they offer the possibility of achieving low-dimensional in-plane exciton confinement, similar to zero-dimensional quantum dots, with intriguing optical and electronic properties via strain or composition engineering. However, realizing such laterally confined 2D monolayers and systematically controlling size-dependent optical properties remain significant challenges. Here, we report the observation of lateral confinement of excitons in epitaxially grown in-plane MoSe2 quantum dots (~15-60 nm wide) inside a continuous matrix of WSe2 monolayer film via a sequential epitaxial growth process. Various optical spectroscopy techniques reveal the size-dependent exciton confinement in the MoSe2 monolayer quantum dots with exciton blue shift (12-40 meV) at a low temperature as compared to continuous monolayer MoSe2. Finally, single-photon emission was also observed from the smallest dots at 1.6 K. Our study opens the door to compositionally engineered, tunable, in-plane quantum light sources in 2D semiconductors. △ Less

Submitted 12 July, 2023; originally announced July 2023.

Comments: Main Manuscript: 29 pages, 4 figures Supplementary Information: 14 pages, 12 figures

Neural 360$^\circ$ Structured Light with Learned Metasurfaces

Authors: Eunsue Choi, Gyeongtae Kim, Jooyeong Yun, Yujin Jeon, Junsuk Rho, Seung-Hwan Baek

Abstract: Structured light has proven instrumental in 3D imaging, LiDAR, and holographic light projection. Metasurfaces, comprised of sub-wavelength-sized nanostructures, facilitate 180$^\circ$ field-of-view (FoV) structured light, circumventing the restricted FoV inherent in traditional optics like diffractive optical elements. However, extant metasurface-facilitated structured light exhibits sub-optimal p… ▽ More Structured light has proven instrumental in 3D imaging, LiDAR, and holographic light projection. Metasurfaces, comprised of sub-wavelength-sized nanostructures, facilitate 180$^\circ$ field-of-view (FoV) structured light, circumventing the restricted FoV inherent in traditional optics like diffractive optical elements. However, extant metasurface-facilitated structured light exhibits sub-optimal performance in downstream tasks, due to heuristic pattern designs such as periodic dots that do not consider the objectives of the end application. In this paper, we present neural 360$^\circ$ structured light, driven by learned metasurfaces. We propose a differentiable framework, that encompasses a computationally-efficient 180$^\circ$ wave propagation model and a task-specific reconstructor, and exploits both transmission and reflection channels of the metasurface. Leveraging a first-order optimizer within our differentiable framework, we optimize the metasurface design, thereby realizing neural 360$^\circ$ structured light. We have utilized neural 360$^\circ$ structured light for holographic light projection and 3D imaging. Specifically, we demonstrate the first 360$^\circ$ light projection of complex patterns, enabled by our propagation model that can be computationally evaluated 50,000$\times$ faster than the Rayleigh-Sommerfeld propagation. For 3D imaging, we improve depth-estimation accuracy by 5.09$\times$ in RMSE compared to the heuristically-designed structured light. Neural 360$^\circ$ structured light promises robust 360$^\circ$ imaging and display for robotics, extended-reality systems, and human-computer interactions. △ Less

Submitted 27 June, 2023; v1 submitted 23 June, 2023; originally announced June 2023.

Beyond Walker Breakdown through the Resonant Dissipation: Dramatic Enhancement of Magnetic Domain Wall Velocity via Resonant Excitation of Standing Wave Modes of Domain Wall Structure

Authors: Ganghwi Kim, Dae-Han Jung, Hee-Sung Han, Ki-Suk Lee

Abstract: The dynamic behaviors of magnetic domain walls have significant implications for developing advanced spintronic devices. In this study, we investigate the intriguing resonance phenomenon within the magnetic domain wall structure and its profound influence on dynamic motion, focusing on the dissipation mechanism. By applying a static external magnetic field, we observe a remarkable amplification of… ▽ More The dynamic behaviors of magnetic domain walls have significant implications for developing advanced spintronic devices. In this study, we investigate the intriguing resonance phenomenon within the magnetic domain wall structure and its profound influence on dynamic motion, focusing on the dissipation mechanism. By applying a static external magnetic field, we observe a remarkable amplification of domain wall velocity, surpassing the limitations of the conventional one-dimensional model. To quantify this enhancement, we introduce a novel parameter, the distortion variation rate, which captures the rapid and pronounced changes occurring within the domain wall structure. Through comprehensive micromagnetic simulations, we establish a robust relationship between speed and distortion variation rate, thereby validating our theoretical framework. Our findings provide crucial insights into the underlying mechanisms governing domain wall dynamics while paving the way for developing and optimizing next-generation spintronic devices boasting unparalleled speed and efficiency. △ Less

Submitted 25 July, 2023; v1 submitted 24 May, 2023; originally announced May 2023.

Comments: 15 pages, 4 figures

Automated Solubility Analysis System and Method Using Computer Vision and Machine Learning

Authors: Gahee Kim, Minwoo Jeon, Hyun Do Choi, Jun Ki Cho, Youn-Suk Choi, Hyoseok Hwang

Abstract: In this study, a novel active solubility sensing device using computer vision is proposed to improve separation purification performance and prevent malfunctions of separation equipment such as preparative liquid chromatographers and evaporators. The proposed device actively measures the solubility by transmitting a solution using a background image. The proposed system is a combination of a devic… ▽ More In this study, a novel active solubility sensing device using computer vision is proposed to improve separation purification performance and prevent malfunctions of separation equipment such as preparative liquid chromatographers and evaporators. The proposed device actively measures the solubility by transmitting a solution using a background image. The proposed system is a combination of a device that uses a background image and a method for estimating the dissolution and particle presence by changing the background image. The proposed device consists of four parts: camera, display, adjustment, and server units. The camera unit is made up of a rear image sensor on a mobile phone. The display unit is comprised of a tablet screen. The adjustment unit is composed of rotating and height-adjustment jigs. Finally, the server unit consists of a socket server for communication between the units and a PC, including an automated solubility analysis system implemented in Python. The dissolution status of the solution was divided into four categories and a case study was conducted. The algorithms were trained based on these results. Six organic materials and four organic solvents were combined with 202 tests to train the developed algorithm. As a result, the evaluation rate for the dissolution state exhibited an accuracy of 95 %. In addition, the device and method must develop a feedback function that can add a solvent or solute after dissolution detection using solubility results for use in autonomous systems, such as a synthetic automation system. Finally, the diversification of the sensing method is expected to extend not only to the solution but also to the solubility and homogeneity analysis of the film. △ Less

Submitted 7 April, 2023; originally announced April 2023.

Comments: 20 pages, 6 figures, 3 tables

Fresnel-type Solid Immersion Lens for efficient light collection from quantum defects in diamond

Authors: SungJoon Park, Gyeonghun Kim, Kiho Kim, Dohun Kim

Abstract: Quantum defects in diamonds have been studied as a promising resource for quantum science. The subtractive fabrication process for improving photon collection efficiency often require excessive milling time that can adversely affect the fabrication accuracy. We designed and fabricated a Fresnel-type solid immersion lens using the focused ion beam. For a 5.8 um-deep Nitrogen-vacancy (NV-) center, t… ▽ More Quantum defects in diamonds have been studied as a promising resource for quantum science. The subtractive fabrication process for improving photon collection efficiency often require excessive milling time that can adversely affect the fabrication accuracy. We designed and fabricated a Fresnel-type solid immersion lens using the focused ion beam. For a 5.8 um-deep Nitrogen-vacancy (NV-) center, the milling time was highly reduced (1/3 compared to a hemispherical structure), while retaining high photon collection efficiency (> 2.24 compared to a flat surface). In numerical simulation, this benefit of the proposed structure is expected for a wide range of milling depths. △ Less

Submitted 18 March, 2023; originally announced March 2023.

Comments: 16 pages, 9 figures

Wafer-scale growth of two-dimensional, phase-pure InSe

Authors: Seunguk Song, Sungho Jeon, Mahfujur Rahaman, Jason Lynch, Pawan Kumar, Srikrishna Chakravarthi, Gwangwoo Kim, Xingyu Du, Eric Blanton, Kim Kisslinger, Michael Snure, Nicholas R. Glavin, Eric A. Stach, Roy H. Olsson, Deep Jariwala

Abstract: Two-dimensional (2D) indium monoselenide (InSe) has attracted significant attention as a III-VI two-dimensional semiconductor (2D) with a combination of favorable attributes from III-V semiconductors as well as van der Waals 2D transition metal dichalcogenides. Nevertheless, the large-area synthesis of phase-pure 2D InSe remains unattained due to the complexity of the binary In-Se system and the d… ▽ More Two-dimensional (2D) indium monoselenide (InSe) has attracted significant attention as a III-VI two-dimensional semiconductor (2D) with a combination of favorable attributes from III-V semiconductors as well as van der Waals 2D transition metal dichalcogenides. Nevertheless, the large-area synthesis of phase-pure 2D InSe remains unattained due to the complexity of the binary In-Se system and the difficulties in promoting lateral growth. Here, we report the first polymorph-selective synthesis of epitaxial 2D InSe by metal-organic chemical deposition (MOCVD) over 2 inch diameter sapphire wafers. We achieve thickness-controlled, layer-by-layer epitaxial growth of InSe on c-plane sapphire via dynamic pulse control of Se/In flux ratio. The layer-by-layer growth allows thickness control over wafer scale with tunable optical properties comparable to bulk crystals. Finally, the gate-tunable electrical transport suggests that MOCVD-grown InSe could be a potential channel material for back-end-of-line integration in logic transistors with field-effect mobility comparable to single-crystalline flakes. △ Less

Submitted 4 March, 2023; originally announced March 2023.

Comments: MS + SI

Interaction of Shock Train with Cavity Shear Layer in a Scramjet Isolator

Authors: Vignesh Ram Petha Sethuraman, Yosheph Yang, Jae Gang Kim

Abstract: The interaction between the self-excited shock train flow and the cavity shear layer in a scramjet isolator is investigated numerically using detached-eddy simulations (DES). The effect of changing the position of the shock train by controlling the back pressure ratio and the effect of changing the cavity front wall angle are analyzed using unsteady statistics and modal analysis. The propagation m… ▽ More The interaction between the self-excited shock train flow and the cavity shear layer in a scramjet isolator is investigated numerically using detached-eddy simulations (DES). The effect of changing the position of the shock train by controlling the back pressure ratio and the effect of changing the cavity front wall angle are analyzed using unsteady statistics and modal analysis. The propagation mechanism of the pressure disturbance was investigated by spatiotemporal cross-correlation coefficient analysis. In the present numerical study, a constant isolator section with a cavity front wall was considered, followed by a diffuser section simulated at Mach number 2.2 with three different back pressure ratios. The change in back pressure provides three different conditions. To understand the unsteady dynamics of the interaction of the shear layer with the shock train, the spatiotemporal trajectory of the wall pressure and the centerline pressure distribution, the spatiotemporal cross-correlation coefficient, and the modal analysis by dynamic mode decomposition are obtained. The results show that the low-frequency shock train oscillation dominates the cavity oscillation. The spatiotemporal cross-correlation between the wall surface and the cavity bottom wall indicates the propagation of local disturbances originating from the separated boundary layer caused by the shock and the recirculation zone in the corners of the cavity. Dynamic mode decomposition analysis shows the shear layer at the leading edge of the cavity and the downstream propagation of large eddies from the cavity. It also shows the pairing of coherent structures between the shock train and the recirculation zone of the cavity. △ Less

Submitted 3 December, 2022; originally announced December 2022.

Comments: Submitted to Physics of Fluid

Pulse shape discrimination using a convolutional neural network for organic liquid scintillator signals

Authors: K. Y. Jung, B. Y. Han, E. J. Jeon, Y. Jeong, H. S. Jo, J. Y. Kim, J. G. Kim, Y. D. Kim, Y. J. Ko, M. H. Lee, J. Lee, C. S. Moon, Y. M. Oh, H. K. Park, S. H. Seo, D. W. Seol, K. Siyeon, G. M. Sun, Y. S. Yoon, I. Yu

Abstract: A convolutional neural network (CNN) architecture is developed to improve the pulse shape discrimination (PSD) power of the gadolinium-loaded organic liquid scintillation detector to reduce the fast neutron background in the inverse beta decay candidate events of the NEOS-II data. A power spectrum of an event is constructed using a fast Fourier transform of the time domain raw waveforms and put in… ▽ More A convolutional neural network (CNN) architecture is developed to improve the pulse shape discrimination (PSD) power of the gadolinium-loaded organic liquid scintillation detector to reduce the fast neutron background in the inverse beta decay candidate events of the NEOS-II data. A power spectrum of an event is constructed using a fast Fourier transform of the time domain raw waveforms and put into CNN. An early data set is evaluated by CNN after it is trained using low energy $β$ and $α$ events. The signal-to-background ratio averaged over 1-10 MeV visible energy range is enhanced by more than 20% in the result of the CNN method compared to that of an existing conventional PSD method, and the improvement is even higher in the low energy region. △ Less

Submitted 15 January, 2023; v1 submitted 14 November, 2022; originally announced November 2022.

Comments: 16 pages, 10 figures

Assessment of fiducial motion in CBCT projections of the abdominal tumor using template matching and sequential stereo triangulation

Authors: Oluwaseyi M. Oderinde, Hassan Mostafavi, Daniel Simpson, James Murphy, Gwe-Ya Kim, Laura I. Cervino

Abstract: Purpose: To assess the fiducial motion in abdominal stereotactic body radiotherapy (SBRT) using the cone-beam computed tomography (CBCT) projections acquired for pre-treatment patient set-up. Materials and Methods: Pre-treatment CBCT projections and anterior-posterior (AP) and lateral (LAT) pair of fluoroscopic sequences of 7 pancreatic and 6 liver SBRT patients with implanted fiducials were analy… ▽ More Purpose: To assess the fiducial motion in abdominal stereotactic body radiotherapy (SBRT) using the cone-beam computed tomography (CBCT) projections acquired for pre-treatment patient set-up. Materials and Methods: Pre-treatment CBCT projections and anterior-posterior (AP) and lateral (LAT) pair of fluoroscopic sequences of 7 pancreatic and 6 liver SBRT patients with implanted fiducials were analyzed for 49 treatment fractions retrospectively. A tracking algorithm based on template matching and sequential stereo triangulation algorithms was used to track the fiducials in the CBCT projections and the fluoro sequence pairs. We predicted the clinical couch adjustment from CBCT tracking and compared it with the clinical couch decision made during the patient's treatment. Results: In 3D coordinate, the fiducial motion ranges for pancreas cases were 9.90+/-3.52 mm, 10.65+/-5.91 mm, and 10.74+/-6.24 mm for CBCT, AP, and LAT fluoro, respectively, while in the liver, they were 13.93+/-3.39 mm, 11.17+/-3.75 mm, and 11.52+/-4.33 mm, respectively. Prediction of couch adjustment in LAT, SI, and AP coordinates from CBCT tracking agrees with the actual clinical couch correction within 0.92+/-0.74 mm, 1.37+/-1.26 mm, and 0.68+/-0.56 mm for pancreas cases and within 1.12+/-0.96 mm, 1.15+/-0.92 mm and 0.90+/-0.86 mm for liver cases, respectively. Conclusion: Tracking pre-treatment CBCT projections using template matching and sequential stereo triangulation is suitable for assessing fiducial motion and adjusting the patient setup for abdominal SBRT. CBCT can be used for motion modeling, potentially eliminating the need for additional fluoroscopic pair acquisition and thus reducing the imaging dose to the patient and the total treatment time. △ Less

Submitted 10 November, 2022; originally announced November 2022.

Status and performance of the AMoRE-I experiment on neutrinoless double beta decay

Authors: H. B. Kim, D. H. Ha, E. J. Jeon, J. A. Jeon, H. S. Jo, C. S. Kang, W. G. Kang, H. S. Kim, S. C. Kim, S. G. Kim, S. K. Kim, S. R. Kim, W. T. Kim, Y. D. Kim, Y. H. Kim, D. H. Kwon, E. S. Lee, H. J. Lee, H. S. Lee, J. S. Lee, M. H. Lee, S. W. Lee, Y. C. Lee, D. S. Leonard, H. S. Lim , et al. (10 additional authors not shown)

Abstract: AMoRE is an international project to search for the neutrinoless double beta decay of $^{100}$Mo using a detection technology consisting of magnetic microcalorimeters (MMCs) and molybdenum-based scintillating crystals. Data collection has begun for the current AMORE-I phase of the project, an upgrade from the previous pilot phase. AMoRE-I employs thirteen $^\mathrm{48depl.}$Ca$^{100}$MoO$_4$ cryst… ▽ More AMoRE is an international project to search for the neutrinoless double beta decay of $^{100}$Mo using a detection technology consisting of magnetic microcalorimeters (MMCs) and molybdenum-based scintillating crystals. Data collection has begun for the current AMORE-I phase of the project, an upgrade from the previous pilot phase. AMoRE-I employs thirteen $^\mathrm{48depl.}$Ca$^{100}$MoO$_4$ crystals and five Li$_2$$^{100}$MoO$_4$ crystals for a total crystal mass of 6.2 kg. Each detector module contains a scintillating crystal with two MMC channels for heat and light detection. We report the present status of the experiment and the performance of the detector modules. △ Less

Submitted 5 November, 2022; originally announced November 2022.

Comments: 8 pages, 4 figures, published in Journal of Low Temperature Physics (2022)

Rovibrational Internal Energy Transfer and Dissociation of High-Temperature Oxygen Mixture

Authors: Sung Min Jo, Simone Venturi, Jae Gang Kim, Marco Panesi

Abstract: This work constructs a rovibrational state-to-state model for the $\text{O}_2$+$\text{O}_2$ system leveraging high-fidelity potential energy surfaces and quasi-classical trajectory calculations. The model is used to investigate internal energy transfer and non-equilibrium reactive processes in dissociating environment using a master equation approach, whereby the kinetics of each internal rovibrat… ▽ More This work constructs a rovibrational state-to-state model for the $\text{O}_2$+$\text{O}_2$ system leveraging high-fidelity potential energy surfaces and quasi-classical trajectory calculations. The model is used to investigate internal energy transfer and non-equilibrium reactive processes in dissociating environment using a master equation approach, whereby the kinetics of each internal rovibrational state is explicitly computed. To cope with the exponentially large number of elementary processes that characterize reactive bimolecular collisions, the internal states of the collision partner are assumed to follow a Boltzmann distribution at a prescribed internal temperature. This procedure makes the problem tractable, reducing the computational cost to a comparable scale with the $\text{O}_2$+O system. The constructed rovibrational-specific kinetic database covers the temperature range of 7500-20000 K. The analysis of the energy transfer and dissociation process in isochoric and isothermal conditions reveals that significant departures from the equilibrium Boltzmann distribution occur during the energy transfer and dissociation phase. Comparing the population distribution of the $\text{O}_2$ molecules against the $\text{O}_2$+O demonstrates a more significant extent of non-equilibrium characterized by a more diffuse distribution whereby the vibrational strands are more clearly identifiable. This is partly due to a less efficient mixing of the rovibrational states, which results in more diffuse rovibrational distributions in the quasi-steady-state distribution. The master equation analysis for the combined $\text{O}_3$+$\text{O}_4$ system reveals that the $\text{O}_2$+$\text{O}_2$ governs the early stage of energy transfer, while the $\text{O}_2$+O takes control of the dissociation dynamics. The findings will provide strong physical foundations for future development of oxygen chemistry. △ Less

Submitted 31 October, 2022; originally announced October 2022.

Tunable Localized Charge Transfer Excitons in a Mixed Dimensional van der Waals Heterostructure

Authors: Mahfujur Rahaman, Emanuele Marino, Alan G. Joly, Seunguk Song, Zhiqiao Jiang, Brian T. OCallahan, Daniel J. Rosen, Kiyoung Jo, Gwangwoo Kim, Patrick Z. El-Khoury, Christopher B. Murray, Deep Jariwala

Abstract: Observation of interlayer, charge-transfer (CT) excitons in van der Waals heterostructures (vdWHs) based on 2D-2D systems has been well investigated. While conceptually interesting, these charge transfer excitons are highly delocalized and spatially localizing them requires twisting layers at very specific angles. This issue of localizing the CT excitons can be overcome via making mixed dimensiona… ▽ More Observation of interlayer, charge-transfer (CT) excitons in van der Waals heterostructures (vdWHs) based on 2D-2D systems has been well investigated. While conceptually interesting, these charge transfer excitons are highly delocalized and spatially localizing them requires twisting layers at very specific angles. This issue of localizing the CT excitons can be overcome via making mixed dimensional vdWHs (MDHs) where one of the components is a spatially quantum confined medium. Here, we demonstrate the formation of CT excitons in a 2D/quasi-2D system comprising MoSe2 and WSe2 monolayers and CdSe/CdS based core/shell nanoplates (NPLs). Spectral signatures of CT excitons in our MDHs were resolved locally at the 2D/single-NPL heterointerface using tip-enhanced photoluminescence (TEPL) at room temperature. By varying both the 2D material, the shell thickness of the NPLs, and applying out-of-plane electric field, the exciton resonance energy was tuned by up to 120 meV. Our finding is a significant step towards the realization of highly tunable MDH-based next generation photonic devices. △ Less

Submitted 22 October, 2022; originally announced October 2022.

Comments: 4 figures, 20 pages

ExoMol line lists -- {XLVI}: Empirical rovibronic spectra of silicon mononitrate (SiN) covering the 6 lowest electronic states and 4 isotopologues

Authors: Mikhail Semenov, Nicholas Clark, Sergei N. Yurchenko, Gap-Sue Kim, Jonathan Tennyson

Abstract: Silicon mononitride ($^{28}$Si$^{14}$N, $^{29}$Si$^{14}$N, $^{30}$Si$^{14}$N, $^{28}$Si$^{15}$N) line lists covering infrared, visible and ultraviolet regions are presented. The \name\ line lists produced by ExoMol include rovibronic transitions between six electronic states: \XS, \AS, \BS, \DS, \asi, \bsi. The \ai\ potential energy and coupling curves, computed at the multireference configuration… ▽ More Silicon mononitride ($^{28}$Si$^{14}$N, $^{29}$Si$^{14}$N, $^{30}$Si$^{14}$N, $^{28}$Si$^{15}$N) line lists covering infrared, visible and ultraviolet regions are presented. The \name\ line lists produced by ExoMol include rovibronic transitions between six electronic states: \XS, \AS, \BS, \DS, \asi, \bsi. The \ai\ potential energy and coupling curves, computed at the multireference configuration interaction (MRCI/aug-cc-pVQZ) level of theory, are refined for the observed states by fitting their analytical representations to 1052 experimentally derived SiN energy levels determined from rovibronic bands belonging to the $X$--$X$, $A$--$X$ and $B$--$X$ electronic systems through the MARVEL procedure. The SiNful line lists are compared to previously observed spectra, recorded and calculated lifetimes, and previously calculated partition functions. SiNful is available via the \url{www.exomol.com} database. △ Less

Submitted 22 October, 2022; originally announced October 2022.

Journal ref: Mon. Not. R. astr. Soc., 516, 1158-1169 (2022)

An ab initio study of the rovibronic spectrum of sulphur monoxide (SO): diabatic vs. adiabatic representation

Authors: Ryan P. Brady, Sergey N. Yurchenko, Gap-Sue Kim, Wilfrid Somogyi, Jonathan Tennyson

Abstract: We present an ab initio study of the rovibronic spectra of sulfur monoxide ($^{32}$S$^{16}$O) using internally contracted multireference confoguration interaction (ic-MRCI) method and aug-cc-pV5Z basis sets. It covers 13 electronic states $X^{3}Σ^{-}$, $a^{1}Δ$, $b^{1}Σ^{+}$, $c^{1}Σ^{-}$, $A^{\prime\prime 3}Σ^{+}$, $A^{\prime 3}Δ$, $A^{3}Π$, $B^{3}Σ^{-}$, $C^{3}Π$, $d^{1}Π$, $e^{1}Π$,… ▽ More We present an ab initio study of the rovibronic spectra of sulfur monoxide ($^{32}$S$^{16}$O) using internally contracted multireference confoguration interaction (ic-MRCI) method and aug-cc-pV5Z basis sets. It covers 13 electronic states $X^{3}Σ^{-}$, $a^{1}Δ$, $b^{1}Σ^{+}$, $c^{1}Σ^{-}$, $A^{\prime\prime 3}Σ^{+}$, $A^{\prime 3}Δ$, $A^{3}Π$, $B^{3}Σ^{-}$, $C^{3}Π$, $d^{1}Π$, $e^{1}Π$, $C^{\prime 3}Π$, and $(3)^{1}Π$ ranging up to 66800 cm$^{-1}$. The ab initio spectroscopic model includes 13 potential energy curves, 23 dipole and transition dipole moment curves, 23 spin-orbit curves, and 14 electronic angular momentum curves. A diabatic representation is built by removing the avoided crossings between the spatially degenerate pairs $C^{3}Π- C^{\prime 3}Π$ and $e^{1}Π- (3)^{1}Π$ through a property-based diabatisation method. We also present non-adiabatic couplings and diabatic couplings for these avoided crossing systems. All phases for our coupling curves are defined, and consistent, providing the first fully reproducible spectroscopic model of SO covering the wavelength range longer than 147 nm. Finally, an ab initio rovibronic spectrum of SO is computed. △ Less

Submitted 6 October, 2022; originally announced October 2022.

Comments: 15 pages, 14 figures

Journal ref: PCCP, 2022

Recommendations and guidelines from the ISMRM Diffusion Study Group for preclinical diffusion MRI: Part 2 -- Ex vivo imaging

Authors: Kurt G Schilling, Francesco Grussu, Andrada Ianus, Brian Hansen, Rachel L C Barrett, Manisha Aggarwal, Stijn Michielse, Fatima Nasrallah, Warda Syeda, Nian Wang, Jelle Veraart, Alard Roebroeck, Andrew F Bagdasarian, Cornelius Eichner, Farshid Sepehrband, Jan Zimmermann, Lucas Soustelle, Christien Bowman, Benjamin C Tendler, Andreea Hertanu, Ben Jeurissen, Lucio Frydman, Yohan van de Looij, David Hike, Jeff F Dunn , et al. (31 additional authors not shown)

Abstract: The value of preclinical diffusion MRI (dMRI) is substantial. While dMRI enables in vivo non-invasive characterization of tissue, ex vivo dMRI is increasingly being used to probe tissue microstructure and brain connectivity. Ex vivo dMRI has several experimental advantages including higher signal-to-noise ratio and spatial resolution compared to in vivo studies, and more advanced diffusion contras… ▽ More The value of preclinical diffusion MRI (dMRI) is substantial. While dMRI enables in vivo non-invasive characterization of tissue, ex vivo dMRI is increasingly being used to probe tissue microstructure and brain connectivity. Ex vivo dMRI has several experimental advantages including higher signal-to-noise ratio and spatial resolution compared to in vivo studies, and more advanced diffusion contrasts for improved microstructure and connectivity characterization. Another major advantage is direct comparison with histological data as a crucial methodological validation. However, there are a number of considerations that must be made when performing ex vivo experiments. The steps from tissue preparation, image acquisition and processing, and interpretation of results are complex, with many decisions that not only differ dramatically from in vivo imaging, but ultimately affect what questions can be answered using the data. This work represents 'Part 2' of a series of recommendations and considerations for preclinical dMRI, where we focus on best practices for dMRI of ex vivo tissue. We first describe the value that ex vivo imaging adds to the field of dMRI, followed by general considerations and foundational knowledge that must be considered when designing experiments. We then give guidelines for ex vivo protocols, including tissue preparation, imaging sequences and data processing including pre-processing, model-fitting, and tractography. Finally, we provide an online resource which lists publicly available ex vivo dMRI datasets and dedicated software packages. In each section, we attempt to provide guidelines and recommendations, but also highlight areas for which no guidelines exist, and where future work should lie. An overarching goal herein is to enhance the rigor and reproducibility of ex vivo dMRI acquisitions and analyses, and thereby advance biomedical knowledge. △ Less

Submitted 7 February, 2023; v1 submitted 27 September, 2022; originally announced September 2022.

Comments: 59 pages, 12 figures, part of ongoing efforts on ISMRM Diffusion Study Group initiative 'Best Practices (Consensus) for diffusion MRI'. arXiv admin note: text overlap with arXiv:2209.12994

Recommendations and guidelines from the ISMRM Diffusion Study Group for preclinical diffusion MRI: Part 1 -- In vivo small-animal imaging

Authors: Ileana O Jelescu, Francesco Grussu, Andrada Ianus, Brian Hansen, Rachel L C Barrett, Manisha Aggarwal, Stijn Michielse, Fatima Nasrallah, Warda Syeda, Nian Wang, Jelle Veraart, Alard Roebroeck, Andrew F Bagdasarian, Cornelius Eichner, Farshid Sepehrband, Jan Zimmermann, Lucas Soustelle, Christien Bowman, Benjamin C Tendler, Andreea Hertanu, Ben Jeurissen, Marleen Verhoye, Lucio Frydman, Yohan van de Looij, David Hike , et al. (32 additional authors not shown)

Abstract: The value of in vivo preclinical diffusion MRI (dMRI) is substantial. Small-animal dMRI has been used for methodological development and validation, characterizing the biological basis of diffusion phenomena, and comparative anatomy. Many of the influential works in this field were first performed in small animals or ex vivo samples. The steps from animal setup and monitoring, to acquisition, anal… ▽ More The value of in vivo preclinical diffusion MRI (dMRI) is substantial. Small-animal dMRI has been used for methodological development and validation, characterizing the biological basis of diffusion phenomena, and comparative anatomy. Many of the influential works in this field were first performed in small animals or ex vivo samples. The steps from animal setup and monitoring, to acquisition, analysis, and interpretation are complex, with many decisions that may ultimately affect what questions can be answered using the data. This work aims to serve as a reference, presenting selected recommendations and guidelines from the diffusion community, on best practices for preclinical dMRI of in vivo animals. In each section, we also highlight areas for which no guidelines exist (and why), and where future work should focus. We first describe the value that small animal imaging adds to the field of dMRI, followed by general considerations and foundational knowledge that must be considered when designing experiments. We briefly describe differences in animal species and disease models and discuss how they are appropriate for different studies. We then give guidelines for in vivo acquisition protocols, including decisions on hardware, animal preparation, imaging sequences and data processing, including pre-processing, model-fitting, and tractography. Finally, we provide an online resource which lists publicly available preclinical dMRI datasets and software packages, to promote responsible and reproducible research. An overarching goal herein is to enhance the rigor and reproducibility of small animal dMRI acquisitions and analyses, and thereby advance biomedical knowledge. △ Less

Submitted 21 April, 2023; v1 submitted 26 September, 2022; originally announced September 2022.

Comments: 69 pages, 6 figures, 1 table

Twisted quantum interference in photoelectron holography with elliptically polarized fields

Authors: G. Kim, C. Hofmann, A. S. Maxwell, C. Figueira de Morisson Faria

Abstract: We perform a systematic analysis of how ultrafast photoelectron holography is influenced by an elliptically polarized field, with emphasis on quantum interference effects. We find that the interplay of the external field and the binding potential leads to twisted holographic patterns for low ellipticities and recover well-known angular offsets for high ellipticities. Using the Coulomb quantum-orbi… ▽ More We perform a systematic analysis of how ultrafast photoelectron holography is influenced by an elliptically polarized field, with emphasis on quantum interference effects. We find that the interplay of the external field and the binding potential leads to twisted holographic patterns for low ellipticities and recover well-known angular offsets for high ellipticities. Using the Coulomb quantum-orbit strong-field approximation (CQSFA), we assess how the field ellipticity affects specific holographic patterns, such as the fan and the spider. The interplay of the external field and the binding potential leads to twisted holographic patterns in the fan, and to loss of contrast in the spider. This behavior can be traced back to interfering electron trajectories, and unequal changes in tunneling probability due to non-vanishing ellipticity. We also derive tunneling times analytically using the strong-field approximation (SFA), provide estimates for ellipticy ranges for which interference is expected to be prominent, and discuss how to construct continuous electron momentum distributions exploring the rotation symmetry around the origin. △ Less

Submitted 15 July, 2022; originally announced July 2022.

2022 Review of Data-Driven Plasma Science

Authors: Rushil Anirudh, Rick Archibald, M. Salman Asif, Markus M. Becker, Sadruddin Benkadda, Peer-Timo Bremer, Rick H. S. Budé, C. S. Chang, Lei Chen, R. M. Churchill, Jonathan Citrin, Jim A Gaffney, Ana Gainaru, Walter Gekelman, Tom Gibbs, Satoshi Hamaguchi, Christian Hill, Kelli Humbird, Sören Jalas, Satoru Kawaguchi, Gon-Ho Kim, Manuel Kirchen, Scott Klasky, John L. Kline, Karl Krushelnick , et al. (38 additional authors not shown)

Abstract: Data science and technology offer transformative tools and methods to science. This review article highlights latest development and progress in the interdisciplinary field of data-driven plasma science (DDPS). A large amount of data and machine learning algorithms go hand in hand. Most plasma data, whether experimental, observational or computational, are generated or collected by machines today.… ▽ More Data science and technology offer transformative tools and methods to science. This review article highlights latest development and progress in the interdisciplinary field of data-driven plasma science (DDPS). A large amount of data and machine learning algorithms go hand in hand. Most plasma data, whether experimental, observational or computational, are generated or collected by machines today. It is now becoming impractical for humans to analyze all the data manually. Therefore, it is imperative to train machines to analyze and interpret (eventually) such data as intelligently as humans but far more efficiently in quantity. Despite the recent impressive progress in applications of data science to plasma science and technology, the emerging field of DDPS is still in its infancy. Fueled by some of the most challenging problems such as fusion energy, plasma processing of materials, and fundamental understanding of the universe through observable plasma phenomena, it is expected that DDPS continues to benefit significantly from the interdisciplinary marriage between plasma science and data science into the foreseeable future. △ Less

Submitted 31 May, 2022; originally announced May 2022.

Comments: 112 pages (including 700+ references), 44 figures, submitted to IEEE Transactions on Plasma Science as a part of the IEEE Golden Anniversary Special Issue

Report number: Los Alamos Report number LA-UR-22-24834

Journal ref: IEEE Transactions on Plasma Science 51, 1750 - 1838 (2023)

Climate of the Field: Snowmass 2021

Authors: Erin V. Hansen, Erica Smith, Deborah Bard, Matthew Bellis, Jessica Esquivel, Tiffany R. Lewis, Cameron Geddes, Cindy Joe, Alex G. Kim, Asmita Patel, Vitaly Pronskikh

Abstract: How are formal policies put in place to create an inclusive, equitable, safe environment? How do these differ between different communities of practice (institutions, labs, collaborations, working groups)? What policies towards a more equitable community are working? For those that aren't working, what external support is needed in order to make them more effective? We present a discussion of the… ▽ More How are formal policies put in place to create an inclusive, equitable, safe environment? How do these differ between different communities of practice (institutions, labs, collaborations, working groups)? What policies towards a more equitable community are working? For those that aren't working, what external support is needed in order to make them more effective? We present a discussion of the current climate of the field in high energy particle physics and astrophysics (HEPA), as well as current efforts toward making the community a more diverse, inclusive, and equitable environment. We also present issues facing both institutions and HEPA collaborations, with a set of interviews with a selection of HEPA collaboration DEI leaders. We encourage the HEPA community and the institutions & agencies that support it to think critically about the prioritization of people in HEPA over the coming decade, and what resources and policies need to be in place in order to protect and elevate minoritized populations within the HEPA community. △ Less

Submitted 29 September, 2022; v1 submitted 7 April, 2022; originally announced April 2022.

Comments: Contribution to Snowmass 2021. New version with endorsers

High Density, Localized Quantum Emitters in Strained 2D Semiconductors

Authors: Gwangwoo Kim, Hyong Min Kim, Pawan Kumar, Mahfujur Rahaman, Christopher E. Stevens, Jonghyuk Jeon, Kiyoung Jo, Kwan-Ho Kim, Nicholas Trainor, Haoyue Zhu, Byeong-Hyeok Sohn, Eric A. Stach, Joshua R. Hendrickson, Nicholas R Glavin, Joonki Suh, Joan M. Redwing, Deep Jariwala

Abstract: Two-dimensional chalcogenide semiconductors have recently emerged as a host material for quantum emitters of single photons. While several reports on defect and strain-induced single photon emission from 2D chalcogenides exist, a bottom-up, lithography-free approach to producing a high density of emitters remains elusive. Further, the physical properties of quantum emission in the case of strained… ▽ More Two-dimensional chalcogenide semiconductors have recently emerged as a host material for quantum emitters of single photons. While several reports on defect and strain-induced single photon emission from 2D chalcogenides exist, a bottom-up, lithography-free approach to producing a high density of emitters remains elusive. Further, the physical properties of quantum emission in the case of strained 2D semiconductors are far from being understood. Here, we demonstrate a bottom-up, scalable, and lithography-free approach to creating large areas of localized emitters with high density (~150 emitters/um2) in a WSe2 monolayer. We induce strain inside the WSe2 monolayer with high spatial density by conformally placing the WSe2 monolayer over a uniform array of Pt nanoparticles with a size of 10 nm. Cryogenic, time-resolved, and gate-tunable luminescence measurements combined with near-field luminescence spectroscopy suggest the formation of localized states in strained regions that emit single photons with a high spatial density. Our approach of using a metal nanoparticle array to generate a high density of strained quantum emitters opens a new path towards scalable, tunable, and versatile quantum light sources. △ Less

Submitted 1 April, 2022; originally announced April 2022.

Comments: 45 pages, 20 figures (5 main figures, 15 supporting figures)

Journal ref: ACS Nano, 2022

Statistical analysis of hard X-ray radiation at PAL-XFEL facility performed by Hanbury Brown and Twiss interferometry

Authors: Young Yong Kim, Ruslan Khubbutdinov, Jerome Carnis, Sangsoo Kim, Daewoong Nam, Inhyuk Nam, Gyujin Kim, Chi Hyun Shim, Haeryong Yang, Myunghoon Cho, Chang-Ki Min, Changbum Kim, Heung-Sik Kang, Ivan Vartanyants

Abstract: Hanbury Brown and Twiss interferometry experiment based on second-order correlations was performed at PAL-XFEL facility. The statistical properties of the X-ray radiation were studied within this experiment. Measurements were performed at NCI beamline at 10 keV photon energy in various operation conditions: Self-Amplified Spontaneous Emission (SASE), SASE with a monochromator, and self-seeding reg… ▽ More Hanbury Brown and Twiss interferometry experiment based on second-order correlations was performed at PAL-XFEL facility. The statistical properties of the X-ray radiation were studied within this experiment. Measurements were performed at NCI beamline at 10 keV photon energy in various operation conditions: Self-Amplified Spontaneous Emission (SASE), SASE with a monochromator, and self-seeding regimes at 120 pC, 180 pC, and 200 pC electron bunch charge, respectively. Statistical analysis showed short average pulse duration from 6 fs to 9 fs depending on operation conditions. A high spatial degree of coherence of about 70-80% was determined in spatial domain for the SASE beams with the monochromator and self-seeding regime of operation. The obtained values describe the statistical properties of the beams generated at PAL-XFEL facility. △ Less

Submitted 25 March, 2022; originally announced March 2022.

Comments: 30 pages, 10 figures, 2 tables

Single Pixel MEMS Spectrometer using Electrothermal Tunable Grating

Authors: Jaehun Jeon, Jung-Woo Park, Gi Beom Kim, Myeong-Su Ahn, Ki-Hun Jeong

Abstract: Miniaturized spectrometers are widely used for non-destructive and on-field spectral analysis. Here we report a tunable grating-based MEMS spectrometer for visible to near-infrared (VIS-NIR) spectroscopy. The MEMS spectrometer consists of a spherical mirror and an electrothermally actuated tunable grating. The spectrometer detects the dispersed spectral signal with a single-pixel detector by tilti… ▽ More Miniaturized spectrometers are widely used for non-destructive and on-field spectral analysis. Here we report a tunable grating-based MEMS spectrometer for visible to near-infrared (VIS-NIR) spectroscopy. The MEMS spectrometer consists of a spherical mirror and an electrothermally actuated tunable grating. The spectrometer detects the dispersed spectral signal with a single-pixel detector by tilting the diffraction grating. The large tilting angle from electrothermal actuation and highly dispersive diffraction grating improves the spectral range and resolution, respectively. The MEMS spectrometer was fully packaged within 1.7 cm3 and provides a measurable spectral range up to 800 nm with an average 1.96 nm spectral resolution. This miniaturized single-pixel spectrometer can provide diverse applications for advanced mobile spectral analysis in agricultural, industrial, or medical fields. △ Less

Submitted 17 March, 2022; originally announced March 2022.

Comments: 8 pages, 4 figures

Measuring the electron neutrino mass using the electron capture decay of 163Ho

Authors: Joel Ullom, Daniel Schmidt, Simon Bandler, Thomas Stevenson, Mark Croce, Katrina Koehler, Matteo De Gerone, Loredana Gastaldo, Christian Enss, Geonbo Kim, Angelo Nucciotti, Stefano Ragazzi, Kyle Leach, Diana Parno, Brian Mong, Josef Frisch, Christopher Kenney

Abstract: While the mass differences between neutrino mass states are known, their absolute masses and mass hierarchy have not yet been determined. Determining the mass of neutrinos provides access to physics beyond the Standard Model and the resulting value has implications for the growth of large-scale structure in the universe over cosmic history. Because of the importance of the topic, a number of effor… ▽ More While the mass differences between neutrino mass states are known, their absolute masses and mass hierarchy have not yet been determined. Determining the mass of neutrinos provides access to physics beyond the Standard Model and the resulting value has implications for the growth of large-scale structure in the universe over cosmic history. Because of the importance of the topic, a number of efforts are already underway to determine the mass of neutrinos including direct kinematic measurements and indirect measurements of astrophysical phenomena that constrain the sum of the mass eigenstates through models of cosmic evolution. Here, we advocate for a collaborative international effort to perform a kinematic determination of the effective electron neutrino mass using calorimetric measurements of the decay of 163Ho. This effort is justified by the success of current experiments using the technique, its high benefit-to-cost ratio, the value of approaches with different systematic errors, and the value of measuring the electron neutrino mass rather than the electron anti-neutrino mass. △ Less

Submitted 14 March, 2022; originally announced March 2022.

Comments: contribution to Snowmass 2021

Quantum Bit Behavior of Pinned Fluxes on Volume Defects in a Superconductor

Authors: H. B. Lee, G. C. Kim, Byeong-Joo Kim, Young Jin Sohn, Y. C. Kim

Abstract: We studied a qubit based on flux-pinning effects in $Δ$H=$Δ$B region of a superconductor. When volume defects are many enough in a superconductor, $Δ$H=$Δ$B region on M-H curve is formed, which is the region that increased applied magnetic field ($Δ$H) is the same as increasing magnetic induction ($Δ$B). Magnetization (M) is constant in the region by 4$π$M = B - H. Here we show that the behavior o… ▽ More We studied a qubit based on flux-pinning effects in $Δ$H=$Δ$B region of a superconductor. When volume defects are many enough in a superconductor, $Δ$H=$Δ$B region on M-H curve is formed, which is the region that increased applied magnetic field ($Δ$H) is the same as increasing magnetic induction ($Δ$B). Magnetization (M) is constant in the region by 4$π$M = B - H. Here we show that the behavior of fluxes in $Δ$H=$Δ$B region can be a candidate of qubit. Pinned fluxes on volume defects would move as a bundle in the region by repeating flux-pinning and pick-out depinning process from the surface to the center of the superconductor. During the process, magnetic fluxes would exist as one of states that are flux-pinning state at volume defects and pick-out depinning state in which fluxes are moving in the superconductor. A difference of diamagnetic property occurs between pinning state at volume defects and depinning state from the volume defects. Thus, diamagnetic properties of the superconductor would oscillate in $Δ$H=$Δ$B region and the behavior would be observed in M-H curve. The oscillation can be used for qubit by setting the pinning state at volume defects as $\ket{1}$ and the depinned state as $\ket{0}$. This method can operate at higher temperatures than that of using Josephson Junctions. In addition, it is expected that the device is quite simple and decoherences can be almost negligible. △ Less

Submitted 16 January, 2022; originally announced January 2022.

Comments: 13 pages, 6 figures

Extending the spectrum of fully integrated photonics

Authors: Minh Tran, Chong Zhang, Theodore Morin, Lin Chang, Sabyasachi Barik, Zhiquan Yuan, Woonghee Lee, Glenn Kim, Aditya Malik, Zeyu Zhang, Joel Guo, Heming Wang, Boqiang Shen, Lue Wu, Kerry Vahala, John Bowers, Tin Komljenovic, Hyundai Park

Abstract: Integrated photonics has profoundly impacted a wide range of technologies underpinning modern society. The ability to fabricate a complete optical system on a chip offers unrivalled scalability, weight, cost and power efficiency. Over the last decade, the progression from pure III-V materials platforms to silicon photonics has significantly broadened the scope of integrated photonics by combining… ▽ More Integrated photonics has profoundly impacted a wide range of technologies underpinning modern society. The ability to fabricate a complete optical system on a chip offers unrivalled scalability, weight, cost and power efficiency. Over the last decade, the progression from pure III-V materials platforms to silicon photonics has significantly broadened the scope of integrated photonics by combining integrated lasers with the high-volume, advanced fabrication capabilities of the commercial electronics industry. Yet, despite remarkable manufacturing advantages, reliance on silicon-based waveguides currently limits the spectral window available to photonic integrated circuits (PICs). Here, we present a new generation of integrated photonics by directly uniting III-V materials with silicon nitride (SiN) waveguides on Si wafers. Using this technology, we present the first fully integrated PICs at wavelengths shorter than silicon's bandgap, demonstrating essential photonic building blocks including lasers, photodetectors, modulators and passives, all operating at sub-um wavelengths. Using this platform, we achieve unprecedented coherence and tunability in an integrated laser at short wavelength. Furthermore, by making use of this higher photon energy, we demonstrate superb high temperature performance and, for the first time, kHz-level fundamental linewidths at elevated temperatures. Given the many potential applications at short wavelengths, the success of this integration strategy unlocks a broad range of new integrated photonics applications. △ Less

Submitted 9 December, 2021; v1 submitted 6 December, 2021; originally announced December 2021.

Study on NaI(Tl) crystal at -35 C for dark matter detection

Authors: S. H. Lee, G. S. Kim, H. J. Kim, K. W. Kim, J. Y. Lee, H. S. Lee

Abstract: We present the responses of a NaI(Tl) crystal in terms of the light yield and pulse shape characteristics of nuclear recoil events at two different temperatures: 22 C (room temperature) and -35 C (low temperature). The light yield is measured using 59.54 keV gamma-rays using a 241Am source relative to the mean charge of single photoelectrons. At the low temperature, we measure a 4.7 +/- 1.3% incre… ▽ More We present the responses of a NaI(Tl) crystal in terms of the light yield and pulse shape characteristics of nuclear recoil events at two different temperatures: 22 C (room temperature) and -35 C (low temperature). The light yield is measured using 59.54 keV gamma-rays using a 241Am source relative to the mean charge of single photoelectrons. At the low temperature, we measure a 4.7 +/- 1.3% increase in the light yield compared to that at room temperature. A significantly increased decay time is also observed at the low temperature. The responses to nuclear recoil events are measured using neutrons from a 252Cf source and compared to those to electron recoil events. The measured pulse shape discrimination (PSD) power of the NaI(Tl) crystal at the low temperature is found to be improved in the entire energy range studied because of the increased light yield and the different scintillation characteristics. We also find an approximately 9% increased quenching factor of alpha-induced events, which is the light yield ratio of alpha recoil to electron recoil, at the low temperature. This supports the possibility of an increased quenching factor of the nuclear recoil events that are known to have similar processes of dark matter interaction. The increased light yield and the improved PSD power of nuclear recoil events enhance the sensitivity for dark matter detection via dark matter-nuclei interactions. △ Less

Submitted 11 November, 2021; v1 submitted 5 November, 2021; originally announced November 2021.

Alpha backgrounds in the AMoRE-Pilot experiment

Authors: V. Alenkov, H. W. Bae, J. Beyer, R. S. Boiko, K. Boonin, O. Buzanov, N. Chanthima, M. K. Cheoun, S. H. Choi, F. A. Danevich, M. Djamal, D. Drung, C. Enss, A. Fleischmann, A. Gangapshev, L. Gastaldo, Yu. M. Gavriljuk, A. Gezhaev, V. D. Grigoryeva, V. Gurentsov, D. H. Ha, C. Ha, E. J. Ha, I. Hahn, E. J. Jeon , et al. (81 additional authors not shown)

Abstract: The Advanced Mo-based Rare process Experiment (AMoRE)-Pilot experiment is an initial phase of the AMoRE search for neutrinoless double beta decay of $^{100}$Mo, with the purpose of investigating the level and sources of backgrounds. Searches for neutrinoless double beta decay generally require ultimately low backgrounds. Surface $α$ decays on the crystals themselves or nearby materials can deposit… ▽ More The Advanced Mo-based Rare process Experiment (AMoRE)-Pilot experiment is an initial phase of the AMoRE search for neutrinoless double beta decay of $^{100}$Mo, with the purpose of investigating the level and sources of backgrounds. Searches for neutrinoless double beta decay generally require ultimately low backgrounds. Surface $α$ decays on the crystals themselves or nearby materials can deposit a continuum of energies that can be as high as the $Q$-value of the decay itself and may fall in the region of interest (ROI). To understand these background events, we studied backgrounds from radioactive contaminations internal to and on the surface of the crystals or nearby materials with Geant4-based Monte Carlo simulations. In this study, we report on the measured $α$ energy spectra fitted with the corresponding simulated spectra for six crystal detectors, where sources of background contributions could be identified through high energy $α$ peaks and continuum parts in the energy spectrum for both internal and surface contaminations. We determine the low-energy contributions from internal and surface $α$ contaminations by extrapolating from the $α$ background fitting model. △ Less

Submitted 5 December, 2022; v1 submitted 16 July, 2021; originally announced July 2021.

Photo de-mixing in Dion-Jacobson two-dimensional mixed halide perovskites

Authors: Ya-Ru Wang, Alessandro Senocrate, Marko Mladenović, Algirdas Dučinskas, Gee Yeong Kim, Ursula Röthlisberger, Jovana V. Milić, Davide Moia, Michael Grätzel, Joachim Maier

Abstract: Two-dimensional (2D) halide perovskites feature a versatile structure, which not only enables the fine-tuning of their optoelectronic properties but also makes them appealing as model systems to investigate the fundamental properties of hybrid perovskites. In this study, we analyzed the changes in the optical absorption of 2D Dion-Jacobson mixed halide perovskite thin films (encapsulated) based on… ▽ More Two-dimensional (2D) halide perovskites feature a versatile structure, which not only enables the fine-tuning of their optoelectronic properties but also makes them appealing as model systems to investigate the fundamental properties of hybrid perovskites. In this study, we analyzed the changes in the optical absorption of 2D Dion-Jacobson mixed halide perovskite thin films (encapsulated) based on (PDMA)Pb(I0.5Br0.5)4 (PDMA: 1,4-phenylenedimethanammonium spacer) exposed to a constant illumination. We demonstrate that these 2D mixed-halide perovskites undergo photo de-mixing with direct transformation from the pristine phase to the de-mixed phases. Almost complete re-mixing of these phases occurs when the sample is left in the dark, showing that the process is reversible in terms of optical properties. On the other hand, exposure to light appears to induce structural changes in the thin film that are not reversible in the dark. We have further investigated temperature-dependent absorption measurements under light to extract the photo de-mixed compositions and to map the photo-miscibility-gap. This work thereby reveals that photo de-mixing occurs in Dion-Jacobson two-dimensional hybrid perovskites and provides strategies to address the role of light in the thermodynamic properties of these materials. △ Less

Submitted 2 July, 2021; originally announced July 2021.

Self-consistent inference formulation of gravity model

Authors: Daekyung Lee, Wonguk Cho, Gunn Kim, Hyeong-Chai Jeong, Beom Jun Kim

Abstract: The gravity model has been a useful framework to describe macroscopic flow patterns in geographically correlated systems. In the general framework of the gravity model, the flow between two nodes decreases with distance and has been set to be proportional to the suitably defined mass of each node. Despite the frequent successful applications of the gravity model and its alternatives, the existing… ▽ More The gravity model has been a useful framework to describe macroscopic flow patterns in geographically correlated systems. In the general framework of the gravity model, the flow between two nodes decreases with distance and has been set to be proportional to the suitably defined mass of each node. Despite the frequent successful applications of the gravity model and its alternatives, the existing models certainly possess a serious logical drawback from a theoretical perspective. In particular, the mass in the gravity model has been either assumed to be proportional to the total in- and out-flow of the corresponding node or simply assigned the other node attribute external to the gravity model formulation. In the present work, we propose a general novel framework in which the mass as well as the distance-dependent deterrence function can be computed iteratively in a self-consistent manner within the framework only based on the flow data as input. We validate our suggested methodology in an artificial synthetic flow data to find the near-perfect agreement between the input information and the results from our framework. We also apply our method to the real international trade network data and discuss implications of the results. △ Less

Submitted 23 June, 2021; v1 submitted 18 June, 2021; originally announced June 2021.

Comments: 8 pages, 6 figures

Local characterization of a heavy-fermion superconductor via sub-Kelvin magnetic force microscopy

Authors: Dirk Wulferding, Geunyong Kim, Hoon Kim, Ilkyu Yang, Eric D. Bauer, Filip Ronning, Roman Movshovich, Jeehoon Kim

Abstract: Using magnetic force microscopy operating at sub-Kelvin temperatures we characterize the heavy-fermion superconductor CeCoIn$_5$. We pinpoint the absolute London penetration depth $λ(0) = 435 \pm 20$ nm and report its temperature dependence, which is closely linked to the symmetry of the superconducting gap. In addition, we directly measure the pinning force of individual Abrikosov vortices and es… ▽ More Using magnetic force microscopy operating at sub-Kelvin temperatures we characterize the heavy-fermion superconductor CeCoIn$_5$. We pinpoint the absolute London penetration depth $λ(0) = 435 \pm 20$ nm and report its temperature dependence, which is closely linked to the symmetry of the superconducting gap. In addition, we directly measure the pinning force of individual Abrikosov vortices and estimate the critical current density $j_c = 9 \times 10^4$ A/cm$^2$. In contrast to the related, well-established tunnel diode oscillator technique, our method is capable of resolving inhomogeneities $locally$ on the micrometer-scale at ultra-low temperature. △ Less

Submitted 30 November, 2020; originally announced December 2020.

Journal ref: Appl. Phys. Lett. 117, 252601 (2020)

DeepRegularizer: Rapid Resolution Enhancement of Tomographic Imaging using Deep Learning

Authors: DongHun Ryu, Dongmin Ryu, YoonSeok Baek, Hyungjoo Cho, Geon Kim, Young Seo Kim, Yongki Lee, Yoosik Kim, Jong Chul Ye, Hyun-Seok Min, YongKeun Park

Abstract: Optical diffraction tomography measures the three-dimensional refractive index map of a specimen and visualizes biochemical phenomena at the nanoscale in a non-destructive manner. One major drawback of optical diffraction tomography is poor axial resolution due to limited access to the three-dimensional optical transfer function. This missing cone problem has been addressed through regularization… ▽ More Optical diffraction tomography measures the three-dimensional refractive index map of a specimen and visualizes biochemical phenomena at the nanoscale in a non-destructive manner. One major drawback of optical diffraction tomography is poor axial resolution due to limited access to the three-dimensional optical transfer function. This missing cone problem has been addressed through regularization algorithms that use a priori information, such as non-negativity and sample smoothness. However, the iterative nature of these algorithms and their parameter dependency make real-time visualization impossible. In this article, we propose and experimentally demonstrate a deep neural network, which we term DeepRegularizer, that rapidly improves the resolution of a three-dimensional refractive index map. Trained with pairs of datasets (a raw refractive index tomogram and a resolution-enhanced refractive index tomogram via the iterative total variation algorithm), the three-dimensional U-net-based convolutional neural network learns a transformation between the two tomogram domains. The feasibility and generalizability of our network are demonstrated using bacterial cells and a human leukaemic cell line, and by validating the model across different samples. DeepRegularizer offers more than an order of magnitude faster regularization performance compared to the conventional iterative method. We envision that the proposed data-driven approach can bypass the high time complexity of various image reconstructions in other imaging modalities. △ Less

Submitted 29 September, 2020; originally announced September 2020.

Pulse Shape Discrimination of Fast Neutron Background using Convolutional Neural Network for NEOS II

Authors: NEOS II Collaboration, Y. Jeong, B. Y. Han, E. J. Jeon, H. S. Jo, D. K. Kim, J. Y. Kim, J. G. Kim, Y. D. Kim, Y. J. Ko, H. M. Lee, M. H. Lee, J. Lee, C. S. Moon, Y. M. Oh, H. K. Park, K. S. Park, S. H. Seo, K. Siyeon, G. M. Sun, Y. S. Yoon, I. Yu

Abstract: Pulse shape discrimination plays a key role in improving the signal-to-background ratio in NEOS analysis by removing fast neutrons. Identifying particles by looking at the tail of the waveform has been an effective and plausible approach for pulse shape discrimination, but has the limitation in sorting low energy particles. As a good alternative, the convolutional neural network can scan the entir… ▽ More Pulse shape discrimination plays a key role in improving the signal-to-background ratio in NEOS analysis by removing fast neutrons. Identifying particles by looking at the tail of the waveform has been an effective and plausible approach for pulse shape discrimination, but has the limitation in sorting low energy particles. As a good alternative, the convolutional neural network can scan the entire waveform as they are to recognize the characteristics of the pulse and perform shape classification of NEOS data. This network provides a powerful identification tool for all energy ranges and helps to search unprecedented phenomena of low-energy, a few MeV or less, neutrinos. △ Less

Submitted 28 September, 2020; originally announced September 2020.

Comments: 7 figures

Measurement of the Background Activities of a 100Mo-enriched Powder Sample for an AMoRE Crystal Material by using Fourteen High-Purity Germanium Detectors

Authors: S. Y. Park, K. I. Hahn, W. G. Kang, V. Kazalov, G. W. Kim, Y. D. Kim, E. K. Lee, M. H. Lee, D. S. Leonard

Abstract: The Advanced Molybdenum-based Rare process Experiment in its second phase (AMoRE-II) will search for neutrinoless double-beta (0ν\b{eta}\b{eta}) decay of 100Mo in 200 kg of molybdate crystals. To achieve the zero-background level in the energy range of the double-beta decay Q-value of 100Mo, the radioactive contamination levels in AMoRE crystals should be low. 100EnrMoO3 powder, which is enriched… ▽ More The Advanced Molybdenum-based Rare process Experiment in its second phase (AMoRE-II) will search for neutrinoless double-beta (0ν\b{eta}\b{eta}) decay of 100Mo in 200 kg of molybdate crystals. To achieve the zero-background level in the energy range of the double-beta decay Q-value of 100Mo, the radioactive contamination levels in AMoRE crystals should be low. 100EnrMoO3 powder, which is enriched in the 100Mo isotope, is used to grow the AMoRE crystals. A shielded array of fourteen high-purity germanium detectors with 70% relative efficiency each was used for the measurement of background activities in a sample of 9.6-kg powder. The detector system named CAGe located at the Yangyang underground laboratory was designed for measuring low levels of radioactivity from natural radioisotopes or cosmogenic nuclides such as 228Ac, 228Th, 226Ra, 88Y, and 40K. The activities of 228Ac and 228Th in the powder sample were 0.88 \pm 0.12 mBq/kg and 0.669 \pm 0.087 mBq/kg, respectively. The activity of 226Ra was measured to be 1.50 \pm 0.23 mBq/kg. The activity of 88Y was 0.101 \pm 0.016 mBq/kg. The activity of 40K was found as 36.0 \pm 4.1 mBq/kg. △ Less

Submitted 4 September, 2020; originally announced September 2020.

Comments: 24 pages, 10 figures, 5 tables

Development of an array of HPGe detectors with 980% relative efficiency

Authors: D. S. Leonard, I. S. Hahn, W. G. Kang, V. Kazalov, G. W. Kim, Y. D. Kim, E. K. Lee, M. H. Lee, S. Y. Park, E. Sala

Abstract: Searches for new physics push experiments to look for increasingly rare interactions. As a result, detectors require increasing sensitivity and specificity, and materials must be screened for naturally occurring, background-producing radioactivity. Furthermore the detectors used for screening must approach the sensitivities of the physics-search detectors themselves, thus motivating iterative deve… ▽ More Searches for new physics push experiments to look for increasingly rare interactions. As a result, detectors require increasing sensitivity and specificity, and materials must be screened for naturally occurring, background-producing radioactivity. Furthermore the detectors used for screening must approach the sensitivities of the physics-search detectors themselves, thus motivating iterative development of detectors capable of both physics searches and background screening. We report on the design, installation, and performance of a novel, low-background, fourteen-element high-purity germanium detector named the CAGe (CUP Array of Germanium), installed at the Yangyang underground laboratory in Korea. △ Less

Submitted 1 September, 2020; originally announced September 2020.

Comments: 12 pages, 6 figures, 3 tables

Transformable Reflective Telescope for optical testing and education

Authors: Woojin Park, Soojong Pak, Geon Hee Kim, Sunwoo Lee, Seunghyuk Chang, Sanghyuk Kim, Byeongjoon Jeong, Trenton James Brendel, Dae Wook Kim

Abstract: We propose and experimentally demonstrate the Transformable Reflective Telescope (TRT) Kit for educational purposes and for performing various optical tests with a single kit. The TRT Kit is a portable optical bench setup suitable for interferometry, spectroscopy, measuring stray light, and developing adaptive optics, among other uses. Supplementary modules may be integrated easily thanks to the m… ▽ More We propose and experimentally demonstrate the Transformable Reflective Telescope (TRT) Kit for educational purposes and for performing various optical tests with a single kit. The TRT Kit is a portable optical bench setup suitable for interferometry, spectroscopy, measuring stray light, and developing adaptive optics, among other uses. Supplementary modules may be integrated easily thanks to the modular design of the TRT Kit. The Kit consists of five units; a primary mirror module, a secondary mirror module, a mounting base module, a baffle module, and an alignment module. Precise alignment and focusing are achieved using a precision optical rail on the alignment module. The TRT Kit transforms into three telescope configurations: Newtonian, Cassegrain, and Gregorian. Students change telescope configurations by exchanging the secondary mirror. The portable design and the aluminum primary mirror of the TRT Kit enable students to perform experiments in various environments. The minimized baffle design utilizes commercial telescope tubes, allowing users to look directly into the optical system while suppressing stray light down to $\sim$10$^{-8}$ point source transmittance (PST). The TRT Kit was tested using a point source and field images. Point source measurement of the Newtonian telescope configuration resulted in an 80\% encircled energy diameter (EED) of 23.8 $μ$m. △ Less

Submitted 7 July, 2020; originally announced July 2020.

Comments: 23 pages, 16 figures

Journal ref: Applied Optics 59(18), 5581 - 5588 (2020)

Experimental Search for Non-Newtonian Forces in the Nanometer Scale with Slow Neutrons

Authors: Y. Kamiya, R. Cubitt, L. Porcar, O. Zimmer, G. N. Kim, S. Komamiya

Abstract: Improved limits for new gravity-like short-range interactions, in which a scattering potential is modeled by the Yukawa-type parametrization, have been obtained by measuring the angular distribution of 6 Å neutrons scattering from atomic xenon gas. We have collected approximately $1.4 \times 10^8$ small-angle neutron scattering events. The data are interpreted as no evidence of new forces and show… ▽ More Improved limits for new gravity-like short-range interactions, in which a scattering potential is modeled by the Yukawa-type parametrization, have been obtained by measuring the angular distribution of 6 Å neutrons scattering from atomic xenon gas. We have collected approximately $1.4 \times 10^8$ small-angle neutron scattering events. The data are interpreted as no evidence of new forces and show improved upper limits on the coupling strength in the interaction range of $0.3$ nm to $9$ nm. These improved constraints are also interpreted as new limits for a model, in which a charge of the new forces is expressed as a linear combination of the baryon number and the lepton number. △ Less

Submitted 10 June, 2020; originally announced June 2020.

Comments: 8 pages, 2 figures, 14TH ASIA-PACIFIC PHYSICS CONFERENCE (APPC2019)

Journal ref: AIP Conference Proceedings 2319, 040017 (2021)

Measurement of the Background Activities of a 100Mo-enriched powder sample for AMoRE crystal material using a single high purity germanium detector

Authors: Su-yeon Park, Insik Hahn, Woon Gu Kang, Gowoon Kim, Eun Kyung Lee, Douglas S. Leonard, Vladimir Kazalov, Yeong Duk Kim, Moo Hyun Lee, Elena Sala

Abstract: The Advanced Molybdenum-based Rare process Experiment (AMoRE) searches for neutrino-less double-beta (0ν\b{eta}\b{eta}) decay of 100Mo in enriched molybdate crystals. The AMoRE crystals must have low levels of radioactive contamination to achieve low background signals with energies near the Q-value of the 100Mo 0ν\b{eta}\b{eta} decay. To produce low-activity crystals, radioactive contaminants in… ▽ More The Advanced Molybdenum-based Rare process Experiment (AMoRE) searches for neutrino-less double-beta (0ν\b{eta}\b{eta}) decay of 100Mo in enriched molybdate crystals. The AMoRE crystals must have low levels of radioactive contamination to achieve low background signals with energies near the Q-value of the 100Mo 0ν\b{eta}\b{eta} decay. To produce low-activity crystals, radioactive contaminants in the raw materials used to form the crystals must be controlled and quantified. 100EnrMoO3 powder, which is enriched in the 100Mo isotope, is of particular interest as it is the source of 100Mo in the crystals. A high-purity germanium detector having 100% relative efficiency, named CC1, is being operated in the Yangyang underground laboratory. Using CC1, we collected a gamma spectrum from a 1.6-kg 100EnrMoO3 powder sample enriched to 96.4% in 100Mo. Activities were analyzed for the isotopes 228Ac, 228Th, 226Ra, and 40K. They are long-lived naturally occurring isotopes that can produce background signals in the region of interest for AMoRE. Activities of both 228Ac and 228Th were < 1.0 mBq/kg at 90% confidence level (C.L.). The activity of 226Ra was measured to be 5.1 \pm 0.4 (stat) \pm 2.2 (syst) mBq/kg. The 40K activity was found as < 16.4 mBq/kg at 90% C.L. △ Less

Submitted 11 August, 2020; v1 submitted 20 May, 2020; originally announced May 2020.

Comments: 20 pages, 6 figures, 5 tables

Journal ref: J. Korean Phys. Soc. 76 (2020) 1060

Growth and development of pure Li2MoO4 crystals for rare event experiment at CUP

Authors: J. K. Son, J. S. Choe, O. Gileva, I. S. Hahn, W. G. Kang, D. Y. Kim, G. W. Kim, H. J. Kim, Y. D. Kim, C. H. Lee, E. K. Lee, M. H. Lee, D. S. Leonard, H. K. Park, S. Y. Park, S. J. Ra, K. A. Shin

Abstract: The Center for Underground Physics (CUP) of the Institute for Basic Science (IBS) is searching for the neutrinoless double-beta decay (0ν\b{eta}\b{eta}) of 100Mo in the molybdate crystals of the AMoRE experiment. The experiment requires pure scintillation crystals to minimize internal backgrounds that can affect the 0ν\b{eta}\b{eta} signal. For the last few years, we have been growing and studying… ▽ More The Center for Underground Physics (CUP) of the Institute for Basic Science (IBS) is searching for the neutrinoless double-beta decay (0ν\b{eta}\b{eta}) of 100Mo in the molybdate crystals of the AMoRE experiment. The experiment requires pure scintillation crystals to minimize internal backgrounds that can affect the 0ν\b{eta}\b{eta} signal. For the last few years, we have been growing and studying Li2MoO4 crystals in a clean-environment facility to minimize external contamination during the crystal growth. Before growing Li2100MoO4 crystal, we have studied Li2natMoO4 crystal growth by a conventional Czochralski (CZ) grower. We grew a few different kinds of Li2natMO4 crystals using different raw materials in a campaign to minimize impurities. We prepared the fused Al2O3 refractories for the growth of ingots. Purities of the grown crystals were measured with high purity germanium detectors and by inductively coupled plasma mass spectrometry. The results show that the Li2MoO4 crystal has purity levels suitable for rare-event experiments. In this study, we present the growth of Li2MoO4 crystals at CUP and their purities. △ Less

Submitted 14 May, 2020; originally announced May 2020.

Comments: 10 pages, 3 figures, INSTR'20 conference (Novosibirsk, Feb. 24-28, 2020)

Journal ref: JINST 15 C07035 (2020)

SND@LHC

Authors: SHiP Collaboration, C. Ahdida, A. Akmete, R. Albanese, A. Alexandrov, M. Andreini, A. Anokhina, S. Aoki, G. Arduini, E. Atkin, N. Azorskiy, J. J. Back, A. Bagulya, F. Baaltasar Dos Santos, A. Baranov, F. Bardou, G. J. Barker, M. Battistin, J. Bauche, A. Bay, V. Bayliss, G. Bencivenni, A. Y. Berdnikov, Y. A. Berdnikov, M. Bertani , et al. (319 additional authors not shown)

Abstract: We propose to build and operate a detector that, for the first time, will measure the process $pp\toνX$ at the LHC and search for feebly interacting particles (FIPs) in an unexplored domain. The TI18 tunnel has been identified as a suitable site to perform these measurements due to very low machine-induced background. The detector will be off-axis with respect to the ATLAS interaction point (IP1)… ▽ More We propose to build and operate a detector that, for the first time, will measure the process $pp\toνX$ at the LHC and search for feebly interacting particles (FIPs) in an unexplored domain. The TI18 tunnel has been identified as a suitable site to perform these measurements due to very low machine-induced background. The detector will be off-axis with respect to the ATLAS interaction point (IP1) and, given the pseudo-rapidity range accessible, the corresponding neutrinos will mostly come from charm decays: the proposed experiment will thus make the first test of the heavy flavour production in a pseudo-rapidity range that is not accessible by the current LHC detectors. In order to efficiently reconstruct neutrino interactions and identify their flavour, the detector will combine in the target region nuclear emulsion technology with scintillating fibre tracking layers and it will adopt a muon identification system based on scintillating bars that will also play the role of a hadronic calorimeter. The time of flight measurement will be achieved thanks to a dedicated timing detector. The detector will be a small-scale prototype of the scattering and neutrino detector (SND) of the SHiP experiment: the operation of this detector will provide an important test of the neutrino reconstruction in a high occupancy environment. △ Less

Submitted 20 February, 2020; originally announced February 2020.

Comments: Letter of Intent

Report number: CERN-LHCC-2020-002, LHCC-I-035

Adsorption properties of dopamine derivatives using carbon nanotubes: A first-principles study

Authors: Heeju Kim, Gunn Kim

Abstract: Detecting dopamine is of great biological importance because the molecule plays many roles in the human body. For instance, the lack of dopamine release is the cause of Parkinson's disease. Although many researchers have carried out experiments on dopamine detection using carbon nanotubes (CNTs), there are only a few theoretical studies on this topic. We study the adsorption properties of dopamine… ▽ More Detecting dopamine is of great biological importance because the molecule plays many roles in the human body. For instance, the lack of dopamine release is the cause of Parkinson's disease. Although many researchers have carried out experiments on dopamine detection using carbon nanotubes (CNTs), there are only a few theoretical studies on this topic. We study the adsorption properties of dopamine and its derivatives, L-DOPA and dopamine o-quinone, adsorbed on a semiconducting (10, 0) CNT, using density functional theory calculations. Our computational simulations reveal that localized states originating from dopamine o-quinone appear in the bandgap of the (10, 0) CNT, but those originating from dopamine and L-DOPA do not appear in the gap. Therefore, dopamine o-quinone is expected to be detectable using an external electric field but dopamine and L-DOPA should be difficult to detect. △ Less

Submitted 30 January, 2020; originally announced January 2020.

Comments: 13 pages, 5 figures

Journal ref: Applied Surface Science, Volume 501, 31 January 2020, 144249