Showing 1–50 of 154 results for author: Khan, A

Using graph neural networks to reconstruct charged pion showers in the CMS High Granularity Calorimeter

Authors: M. Aamir, B. Acar, G. Adamov, T. Adams, C. Adloff, S. Afanasiev, C. Agrawal, C. Agrawal, A. Ahmad, H. A. Ahmed, S. Akbar, N. Akchurin, B. Akgul, B. Akgun, R. O. Akpinar, E. Aktas, A. AlKadhim, V. Alexakhin, J. Alimena, J. Alison, A. Alpana, W. Alshehri, P. Alvarez Dominguez, M. Alyari, C. Amendola , et al. (550 additional authors not shown)

Abstract: A novel method to reconstruct the energy of hadronic showers in the CMS High Granularity Calorimeter (HGCAL) is presented. The HGCAL is a sampling calorimeter with very fine transverse and longitudinal granularity. The active media are silicon sensors and scintillator tiles readout by SiPMs and the absorbers are a combination of lead and Cu/CuW in the electromagnetic section, and steel in the hadr… ▽ More A novel method to reconstruct the energy of hadronic showers in the CMS High Granularity Calorimeter (HGCAL) is presented. The HGCAL is a sampling calorimeter with very fine transverse and longitudinal granularity. The active media are silicon sensors and scintillator tiles readout by SiPMs and the absorbers are a combination of lead and Cu/CuW in the electromagnetic section, and steel in the hadronic section. The shower reconstruction method is based on graph neural networks and it makes use of a dynamic reduction network architecture. It is shown that the algorithm is able to capture and mitigate the main effects that normally hinder the reconstruction of hadronic showers using classical reconstruction methods, by compensating for fluctuations in the multiplicity, energy, and spatial distributions of the shower's constituents. The performance of the algorithm is evaluated using test beam data collected in 2018 prototype of the CMS HGCAL accompanied by a section of the CALICE AHCAL prototype. The capability of the method to mitigate the impact of energy leakage from the calorimeter is also demonstrated. △ Less

Submitted 30 June, 2024; v1 submitted 17 June, 2024; originally announced June 2024.

Comments: Prepared for submission to JINST

Projected background and sensitivity of AMoRE-II

Authors: A. Agrawal, V. V. Alenkov, P. Aryal, J. Beyer, B. Bhandari, R. S. Boiko, K. Boonin, O. Buzanov, C. R. Byeon, N. Chanthima, M. K. Cheoun, J. S. Choe, Seonho Choi, S. Choudhury, J. S. Chung, F. A. Danevich, M. Djamal, D. Drung, C. Enss, A. Fleischmann, A. M. Gangapshev, L. Gastaldo, Y. M. Gavrilyuk, A. M. Gezhaev, O. Gileva , et al. (81 additional authors not shown)

Abstract: AMoRE-II aims to search for neutrinoless double beta decay with an array of 423 Li$_2$$^{100}$MoO$_4$ crystals operating in the cryogenic system as the main phase of the Advanced Molybdenum-based Rare process Experiment (AMoRE). AMoRE has been planned to operate in three phases: AMoRE-pilot, AMoRE-I, and AMoRE-II. AMoRE-II is currently being installed at the Yemi Underground Laboratory, located ap… ▽ More AMoRE-II aims to search for neutrinoless double beta decay with an array of 423 Li$_2$$^{100}$MoO$_4$ crystals operating in the cryogenic system as the main phase of the Advanced Molybdenum-based Rare process Experiment (AMoRE). AMoRE has been planned to operate in three phases: AMoRE-pilot, AMoRE-I, and AMoRE-II. AMoRE-II is currently being installed at the Yemi Underground Laboratory, located approximately 1000 meters deep in Jeongseon, Korea. The goal of AMoRE-II is to reach up to $T^{0νββ}_{1/2}$ $\sim$ 6 $\times$ 10$^{26}$ years, corresponding to an effective Majorana mass of 15 - 29 meV, covering all the inverted mass hierarchy regions. To achieve this, the background level of the experimental configurations and possible background sources of gamma and beta events should be well understood. We have intensively performed Monte Carlo simulations using the GEANT4 toolkit in all the experimental configurations with potential sources. We report the estimated background level that meets the 10$^{-4}$counts/(keV$\cdot$kg$\cdot$yr) requirement for AMoRE-II in the region of interest (ROI) and show the projected half-life sensitivity based on the simulation study. △ Less

Submitted 13 June, 2024; originally announced June 2024.

Quantum Hardware-Enabled Molecular Dynamics via Transfer Learning

Authors: Abid Khan, Prateek Vaish, Yaoqi Pang, Nikhil Kowshik, Michael S. Chen, Clay H. Batton, Grant M. Rotskoff, J. Wayne Mullinax, Bryan K. Clark, Brenda M. Rubenstein, Norm M. Tubman

Abstract: The ability to perform ab initio molecular dynamics simulations using potential energies calculated on quantum computers would allow virtually exact dynamics for chemical and biochemical systems, with substantial impacts on the fields of catalysis and biophysics. However, noisy hardware, the costs of computing gradients, and the number of qubits required to simulate large systems present major cha… ▽ More The ability to perform ab initio molecular dynamics simulations using potential energies calculated on quantum computers would allow virtually exact dynamics for chemical and biochemical systems, with substantial impacts on the fields of catalysis and biophysics. However, noisy hardware, the costs of computing gradients, and the number of qubits required to simulate large systems present major challenges to realizing the potential of dynamical simulations using quantum hardware. Here, we demonstrate that some of these issues can be mitigated by recent advances in machine learning. By combining transfer learning with techniques for building machine-learned potential energy surfaces, we propose a new path forward for molecular dynamics simulations on quantum hardware. We use transfer learning to reduce the number of energy evaluations that use quantum hardware by first training models on larger, less accurate classical datasets and then refining them on smaller, more accurate quantum datasets. We demonstrate this approach by training machine learning models to predict a molecule's potential energy using Behler-Parrinello neural networks. When successfully trained, the model enables energy gradient predictions necessary for dynamics simulations that cannot be readily obtained directly from quantum hardware. To reduce the quantum resources needed, the model is initially trained with data derived from low-cost techniques, such as Density Functional Theory, and subsequently refined with a smaller dataset obtained from the optimization of the Unitary Coupled Cluster ansatz. We show that this approach significantly reduces the size of the quantum training dataset while capturing the high accuracies needed for quantum chemistry simulations. △ Less

Submitted 12 June, 2024; originally announced June 2024.

Comments: 1- pages, 12 figures

Segmentation of dense and multi-species bacterial colonies achieved using models trained on synthetic microscopy images

Authors: Vincent Hickl, Abid Khan, René M. Rossi, Bruno F. B. Silva, Katharina Maniura-Weber

Abstract: The spread of microbial infections is governed by the self-organization of bacteria on surfaces. Limitations of live imaging techniques make collective behaviors in clinically relevant systems challenging to quantify. Here, novel experimental and image analysis techniques for high-fidelity single-cell segmentation of bacterial colonies are developed. Machine learning-based segmentation models are… ▽ More The spread of microbial infections is governed by the self-organization of bacteria on surfaces. Limitations of live imaging techniques make collective behaviors in clinically relevant systems challenging to quantify. Here, novel experimental and image analysis techniques for high-fidelity single-cell segmentation of bacterial colonies are developed. Machine learning-based segmentation models are trained solely using synthetic microscopy images that are processed to look realistic using state-of-the-art image-to-image translation methods, requiring no biophysical modeling. Accurate single-cell segmentation is achieved for densely packed single-species colonies and multi-species colonies of common pathogenic bacteria, even under suboptimal imaging conditions and for both brightfield and confocal laser scanning microscopy. The resulting data provide quantitative insights into the self-organization of bacteria on soft surfaces. Thanks to their high adaptability and relatively simple implementation, these methods promise to greatly facilitate quantitative descriptions of bacterial infections in varied environments. △ Less

Submitted 14 June, 2024; v1 submitted 20 May, 2024; originally announced May 2024.

Comments: 12 pages, 5 figures

Effect of the Source toSubstrate Distance on Structural, Optoelectronic, and Thermoelectric Properties of Zinc Sulfide Thin Films

Authors: Asad Ur Rehman Khan, Muhammad Ramzan, Muhammad Faisal Iqbal, Muhammad Hafeez, Mohammed M. Fadhali, Hamoud H. Somaily, Muhammad Javid, Muhammad Waqas Mukhtar, Muhammad Farooq Saleem

Abstract: Zinc sulfide ZnS thin films with variable structural, optical, electrical, and thermoelectric properties were obtained by changing the source to substrate SSD distance in the physical vaporthermal coating PVTC system. The films crystallized into a zinc blede cubic structure with 111 preferred orientation. Zinc sulfide ZnS thin films with variable structural, optical, electrical, and thermoelectric properties were obtained by changing the source to substrate SSD distance in the physical vaporthermal coating PVTC system. The films crystallized into a zinc blede cubic structure with 111 preferred orientation. △ Less

Submitted 2 April, 2024; originally announced April 2024.

Investigating the Relationship between Simulation Parameters and Flow Variables in Simulating Atmospheric Gravity Waves in Wind Energy Applications

Authors: Mehtab Ahmed Khan, Dries Allaerts, Simon Watson, Matthew Churchfield

Abstract: Wind farms, particularly offshore clusters, are becoming larger than ever before. Besides influencing wind farms and local meteorology downstream, large wind farms can trigger atmospheric gravity waves in the inversion layer and the free atmosphere aloft. Wind farm-induced gravity waves can cause adverse pressure gradients upstream of the wind farm, that contribute to the global blockage effect, a… ▽ More Wind farms, particularly offshore clusters, are becoming larger than ever before. Besides influencing wind farms and local meteorology downstream, large wind farms can trigger atmospheric gravity waves in the inversion layer and the free atmosphere aloft. Wind farm-induced gravity waves can cause adverse pressure gradients upstream of the wind farm, that contribute to the global blockage effect, and favorable pressure gradients above and downstream of the wind farm that enhance wake recovery. Numerical modeling is a powerful means of studying wind farm-induced atmospheric gravity waves, but it comes with the challenge of handling spurious reflections of these waves from domain boundaries. Approaches like radiation boundary conditions and forcing zones are used to avoid the reflections. However, the simulation setup heavily relies on ad-hoc processes. For instance, the widely used Rayleigh damping method requires ad-hoc tuning to acquire a setup only applicable to a particular case. To surmount this hurdle, we conduct a systematic LES study for flow over a 2D hill and through wind farm canopies that explores the dependence of domain size and damping layer setup on parameters driving linearly stratified atmospheric flows. Mainly the internal waves in the free atmosphere reflect from the boundaries, therefore by simulation linearly stratified conditions we focus on internal waves only. The Froude number drives most of the internal wave properties, such as wavelengths, amplitude, and direction. Therefore, the domain sizing and Rayleigh damping layer setup mainly depends on the Froude number. We anticipated the effective wavelengths to be the correct length scale to size the domain and damping layer thickness. Also, the damping coefficient is scaled with Brunt-Väisälä frequency. △ Less

Submitted 22 March, 2024; originally announced March 2024.

Development of novel ionization chambers for reference dosimetry in electron FLASH radiotherapy

Authors: Kevin Liu, Shannon Holmes, Ahtesham Ullah Khan, Brian Hooten, Larry DeWerd, Emil Schüler, Sam Beddar

Abstract: The aim of this study was to optimize the design and performance of parallel plate ion chambers for use in ultra-high dose rate (UHDR) dosimetry applications, and evaluate their potential as reference class chambers for calibration purposes. Three chambers were designed and produced: the A11-VAR (0.2-1.0 mm electrode gap, 20 mm diameter collector), the A11-TPP (0.3 mm electrode gap, 20 mm diameter… ▽ More The aim of this study was to optimize the design and performance of parallel plate ion chambers for use in ultra-high dose rate (UHDR) dosimetry applications, and evaluate their potential as reference class chambers for calibration purposes. Three chambers were designed and produced: the A11-VAR (0.2-1.0 mm electrode gap, 20 mm diameter collector), the A11-TPP (0.3 mm electrode gap, 20 mm diameter collector), and the A30 (0.3 mm electrode gap, 5.4 mm diameter collector).The chambers underwent full characterization using an UHDR 9 MeV electron beam with individually varied beam parameters of pulse repetition frequency (PRF, 10-120Hz), pulse width (PW, 0.5-4us), and pulse amplitude (0.01-9 Gy/pulse). The response of the ion chambers was evaluated as a function of the dose per pulse (DPP), PRF, PW, dose rate, electric field strength, and electrode gap. The chamber response was found to be dependent on DPP and PW, whose dependencies were mitigated with larger electric field strengths and smaller electrode spacing. At a constant electric field strength, we measured a larger charge collection efficiency (CCE) as a function of DPP for ion chambers with a smaller electrode gap in the A11-VAR. For ion chambers with identical electrode gap (A11-TPP and A30), higher electric field strengths were found to yield better CCE at higher DPP. A PW dependence was observed at low electric field strengths (500 V/mm) for DPP values ranging from 1-5 Gy at PWs ranging from 0.5-4 μs, but at electric field strengths of 1000 V/mm and higher, these effects become negligible. This study confirmed that the charge collection efficiency of ion chambers depends strongly on the electrode spacing and the electric field strength, and also on the DPP and the PW of the UHDR beam. The new finding of this study is that the PW dependence becomes negligible with reduced electrode spacing and increased electric field. △ Less

Submitted 8 March, 2024; originally announced March 2024.

Comments: 29 pages, 9 figures

Sorting of mesoporous silica derivatives by random optical fields

Authors: Mohammad Hadi Sadri, Ramin Jamali, Asif Jamal Khan, Fozia Rehman, Ali-Reza Moradi

Abstract: Mesoporous silica particles are promising candidates for drug delivery applications. In this paper, we first synthesize mesoporous silica MCM-41 and its derivative MCM-41GA with anchored glutaraldehyde bridges, and characterize them using a variety of techniques, including nitrogen adsorption/desorption, X-ray diffraction, NMR spectroscopy, scanning electron microscopy, and thermogravimetric analy… ▽ More Mesoporous silica particles are promising candidates for drug delivery applications. In this paper, we first synthesize mesoporous silica MCM-41 and its derivative MCM-41GA with anchored glutaraldehyde bridges, and characterize them using a variety of techniques, including nitrogen adsorption/desorption, X-ray diffraction, NMR spectroscopy, scanning electron microscopy, and thermogravimetric analysis. Then, we employ random optical fields to sort mesoporous silica particles. Random optical fields by containing local intensity gradients throughout a wide range of field of view provide an elegant, easy-to-implement, and low-cost variant of multiple optical tweezers, which is known as speckle tweezers (ST). ST, similar to multiple optical tweezers, for manipulation tasks, such as trapping, sorting, and guiding of collection of micro and sub-micro objects in several disciplines including statistical physics, chemistry, microfluidics and material science. We show that ST can restrict, sieve, and sort MCM-41 and MCM-41GA particles. The different interaction of mesoporous silica variations with the applied ST may be attributed to the pre-applied modification and the differences in the porosity structure and distribution. Therefore, the results provide insight into the textural and chemical characteristics of mesoporous materials, contributing to a deeper understanding of their potential applications. △ Less

Submitted 22 February, 2024; originally announced February 2024.

Quantum State Tomography using Quantum Machine Learning

Authors: Nouhaila Innan, Owais Ishtiaq Siddiqui, Shivang Arora, Tamojit Ghosh, Yasemin Poyraz Koçak, Dominic Paragas, Abdullah Al Omar Galib, Muhammad Al-Zafar Khan, Mohamed Bennai

Abstract: Quantum State Tomography (QST) is a fundamental technique in Quantum Information Processing (QIP) for reconstructing unknown quantum states. However, the conventional QST methods are limited by the number of measurements required, which makes them impractical for large-scale quantum systems. To overcome this challenge, we propose the integration of Quantum Machine Learning (QML) techniques to enha… ▽ More Quantum State Tomography (QST) is a fundamental technique in Quantum Information Processing (QIP) for reconstructing unknown quantum states. However, the conventional QST methods are limited by the number of measurements required, which makes them impractical for large-scale quantum systems. To overcome this challenge, we propose the integration of Quantum Machine Learning (QML) techniques to enhance the efficiency of QST. In this paper, we conduct a comprehensive investigation into various approaches for QST, encompassing both classical and quantum methodologies; We also implement different QML approaches for QST and demonstrate their effectiveness on various simulated and experimental quantum systems, including multi-qubit networks. Our results show that our QML-based QST approach can achieve high fidelity (98%) with significantly fewer measurements than conventional methods, making it a promising tool for practical QIP applications. △ Less

Submitted 20 August, 2023; originally announced August 2023.

Comments: 18 pages, 19 figures

Journal ref: Quantum Mach. Intell. 6, 28 (2024)

Non-volatile Phase-only Transmissive Spatial Light Modulators

Authors: Zhuoran Fang, Rui Chen, Johannes E. Fröch, Quentin A. A. Tanguy, Asir Intisar Khan, Xiangjin Wu, Virat Tara, Arnab Manna, David Sharp, Christopher Munley, Forrest Miller, Yang Zhao, Sarah J. Geiger, Karl F. Böhringer, Matthew Reynolds, Eric Pop, Arka Majumdar

Abstract: Free-space modulation of light is crucial for many applications, from light detection and ranging to virtual or augmented reality. Traditional means of modulating free-space light involves spatial light modulators based on liquid crystals and microelectromechanical systems, which are bulky, have large pixel areas (~10 micron x 10 micron), and require high driving voltage. Recent progress in meta-o… ▽ More Free-space modulation of light is crucial for many applications, from light detection and ranging to virtual or augmented reality. Traditional means of modulating free-space light involves spatial light modulators based on liquid crystals and microelectromechanical systems, which are bulky, have large pixel areas (~10 micron x 10 micron), and require high driving voltage. Recent progress in meta-optics has shown promise to circumvent some of the limitations. By integrating active materials with sub-wavelength pixels in a meta-optic, the power consumption can be dramatically reduced while achieving a faster speed. However, these reconfiguration methods are volatile and hence require constant application of control signals, leading to phase jitter and crosstalk. Additionally, to control a large number of pixels, it is essential to implement a memory within each pixel to have a tractable number of control signals. Here, we develop a device with nonvolatile, electrically programmable, phase-only modulation of free-space infrared radiation in transmission using the low-loss phase-change material (PCM) Sb2Se3. By coupling an ultra-thin PCM layer to a high quality (Q)-factor (Q~406) diatomic metasurface, we demonstrate a phase-only modulation of ~0.25pi (~0.2pi) in simulation (experiment), ten times larger than a bare PCM layer of the same thickness. The device shows excellent endurance over 1,000 switching cycles. We then advance the device geometry, to enable independent control of 17 meta-molecules, achieving ten deterministic resonance levels with a 2pi phase shift. By independently controlling the phase delay of pixels, we further show tunable far-field beam shaping. Our work paves the way to realizing non-volatile transmissive phase-only spatial light modulators. △ Less

Submitted 22 July, 2023; originally announced July 2023.

Design and Analysis of Arc-Shaped Single Core Photonic Crystal Fiber Sensor Based on Surface Plasmon Resonance

Authors: Tasmiah Tunazzina, Fairuz Areefin Khan, Anuva Chowdhury

Abstract: The selection of a suitable plasmonic material is extremely crucial for achieving high-performance photonic crystal fiber-based surface plasmon resonance (PCF-SPR) sensors. However, most numerical investigations to date are limited to PCF-SPR sensors with conventional circularly coated plasmonic metals due to their availability and rigid properties. In this work, a single-core arc-shaped photonic… ▽ More The selection of a suitable plasmonic material is extremely crucial for achieving high-performance photonic crystal fiber-based surface plasmon resonance (PCF-SPR) sensors. However, most numerical investigations to date are limited to PCF-SPR sensors with conventional circularly coated plasmonic metals due to their availability and rigid properties. In this work, a single-core arc-shaped photonic crystal fiber is designed and studied with sensing ingredients coated outside the fiber. The simulation and numerical analyses were performed using the full-vector finite element method (FV-FEM) to examine the effects of using gold as active metal and also the deposition of $Ta_2 O_5$ on gold. The results show that the arc-shaped sensor with gold film can obtain the maximum wavelength interrogation sensitivity (WIS) of 9500 nm/RIU within the refractive index (RI) range of 1.25 to 1.39 while the maximum amplitude interrogation sensitivity (AIS) is reached 579.26 $RIU^{-1}$ at 1.39 and resolution is found to be 1.05 x ${10^{-5}}$. However, depositing $Ta_2 O_5$ on the gold gives an improved maximum WIS and AIS of 22000 nm/RIU, and 1209.21 $RIU^{-1}$, respectively. With the coating of $Ta_2 O_5$, the resolution improves to 4.55 x ${10^{-6}}$ making the proposed sensor design undoubtedly effective in detecting different biological samples with a wide range of RI. △ Less

Submitted 15 July, 2023; originally announced July 2023.

Does entanglement enhance single-molecule pulsed biphoton spectroscopy?

Authors: Aiman Khan, Francesco Albarelli, Animesh Datta

Abstract: It depends. For a single molecule interacting with one mode of a biphoton probe, we show that the spectroscopic information has three contributions, only one of which is a genuine two-photon contribution. When all the scattered light can be measured, solely this contribution exists and can be fully extracted using unentangled measurements. Furthermore, this two-photon contribution can, in principl… ▽ More It depends. For a single molecule interacting with one mode of a biphoton probe, we show that the spectroscopic information has three contributions, only one of which is a genuine two-photon contribution. When all the scattered light can be measured, solely this contribution exists and can be fully extracted using unentangled measurements. Furthermore, this two-photon contribution can, in principle, be matched by an optimised but unentangled single-photon probe. When the matter system spontaneously emits into inaccessible modes, an advantage due to entanglement can not be ruled out. In practice, time-frequency entanglement does enhance spectroscopic performance of the oft-studied weakly-pumped spontaneous parametric down conversion (PDC) probes. For two-level systems and coupled dimers, more entangled PDC probes yield more spectroscopic information, even in the presence of emission into inaccessible modes. Moreover, simple, unentangled measurements can capture between 60% - 90% of the spectroscopic information. We thus establish that biphoton spectroscopy using source-engineered PDC probes and unentangled measurements can provide tangible quantum enhancement. Our work underscores the intricate role of entanglement in single-molecule spectroscopy using quantum light. △ Less

Submitted 5 July, 2023; originally announced July 2023.

Comments: 18+14 pages, 12+14 figures, 1+0 tables

Journal ref: Quantum Sci. Technol. 9 035004 (2024)

Efficient computation of coherent multimode instabilities in lasers using a spectral approach

Authors: Sara Kacmoli, Saeed A. Khan, Claire F. Gmachl, Hakan E. Türeci

Abstract: Coherent multimode instabilities are responsible for several phenomena of recent interest in semiconductor lasers, such as the generation of frequency combs and ultrashort pulses. These techonologies have proven disruptive in optical telecommunications and spectroscopy applications. While the standard Maxwell-Bloch equations encompass such complex lasing phenomena, their integration is computation… ▽ More Coherent multimode instabilities are responsible for several phenomena of recent interest in semiconductor lasers, such as the generation of frequency combs and ultrashort pulses. These techonologies have proven disruptive in optical telecommunications and spectroscopy applications. While the standard Maxwell-Bloch equations encompass such complex lasing phenomena, their integration is computationally expensive and offers limited analytical insight. In this paper, we demonstrate an efficient spectral approach to the simulation of multimode instabilities via a quantitative analysis of the instability of single-frequency lasing in ring lasers, referred to as the Lorenz-Haken (LH) instability or the Risken-Nummedal-Graham-Haken (RNGH) instability in distinct parameter regimes. Our approach, referred to as CFTD, uses generally non-Hermitian Constant Flux modes to obtain projected Time Domain equations. CFTD provides excellent agreement with finite-difference integration of the Maxwell-Bloch equations across a wide range of parameters in regimes of non-stationary inversion, including frequency comb formation and spatiotemporal chaos. We also develop a modal linear stability analysis using CFTD to efficiently predict multimode instabilities in lasers. The combination of numerical accuracy, speedup, and semi-analytic insight across a variety of dynamical regimes make the CFTD approach ideal to analyze multimode instabilities in lasers, especially in more complex geometries or coupled laser arrays. △ Less

Submitted 5 June, 2023; originally announced June 2023.

Comments: 20 pages, 11 figures, journal paper

The JUNO experiment Top Tracker

Authors: JUNO Collaboration, Angel Abusleme, Thomas Adam, Shakeel Ahmad, Rizwan Ahmed, Sebastiano Aiello, Muhammad Akram, Abid Aleem, Tsagkarakis Alexandros, Fengpeng An, Qi An, Giuseppe Andronico, Nikolay Anfimov, Vito Antonelli, Tatiana Antoshkina, Burin Asavapibhop, João Pedro Athayde Marcondes de André, Didier Auguste, Weidong Bai, Nikita Balashov, Wander Baldini, Andrea Barresi, Davide Basilico, Eric Baussan, Marco Bellato , et al. (592 additional authors not shown)

Abstract: The main task of the Top Tracker detector of the neutrino reactor experiment Jiangmen Underground Neutrino Observatory (JUNO) is to reconstruct and extrapolate atmospheric muon tracks down to the central detector. This muon tracker will help to evaluate the contribution of the cosmogenic background to the signal. The Top Tracker is located above JUNO's water Cherenkov Detector and Central Detector… ▽ More The main task of the Top Tracker detector of the neutrino reactor experiment Jiangmen Underground Neutrino Observatory (JUNO) is to reconstruct and extrapolate atmospheric muon tracks down to the central detector. This muon tracker will help to evaluate the contribution of the cosmogenic background to the signal. The Top Tracker is located above JUNO's water Cherenkov Detector and Central Detector, covering about 60% of the surface above them. The JUNO Top Tracker is constituted by the decommissioned OPERA experiment Target Tracker modules. The technology used consists in walls of two planes of plastic scintillator strips, one per transverse direction. Wavelength shifting fibres collect the light signal emitted by the scintillator strips and guide it to both ends where it is read by multianode photomultiplier tubes. Compared to the OPERA Target Tracker, the JUNO Top Tracker uses new electronics able to cope with the high rate produced by the high rock radioactivity compared to the one in Gran Sasso underground laboratory. This paper will present the new electronics and mechanical structure developed for the Top Tracker of JUNO along with its expected performance based on the current detector simulation. △ Less

Submitted 9 March, 2023; originally announced March 2023.

Comments: 20 pages

Journal ref: Nucl.Instrum.Meth.A 1057 (2023) 168680

JUNO sensitivity to $^7$Be, $pep$, and CNO solar neutrinos

Authors: Angel Abusleme, Thomas Adam, Shakeel Ahmad, Rizwan Ahmed, Sebastiano Aiello, Muhammad Akram, Abid Aleem, Tsagkarakis Alexandros, Fengpeng An, Qi An, Giuseppe Andronico, Nikolay Anfimov, Vito Antonelli, Tatiana Antoshkina, Burin Asavapibhop, João Pedro Athayde Marcondes de André, Didier Auguste, Weidong Bai, Nikita Balashov, Wander Baldini, Andrea Barresi, Davide Basilico, Eric Baussan, Marco Bellato, Marco Beretta , et al. (592 additional authors not shown)

Abstract: The Jiangmen Underground Neutrino Observatory (JUNO), the first multi-kton liquid scintillator detector, which is under construction in China, will have a unique potential to perform a real-time measurement of solar neutrinos well below the few MeV threshold typical for Water Cherenkov detectors. JUNO's large target mass and excellent energy resolution are prerequisites for reaching unprecedented… ▽ More The Jiangmen Underground Neutrino Observatory (JUNO), the first multi-kton liquid scintillator detector, which is under construction in China, will have a unique potential to perform a real-time measurement of solar neutrinos well below the few MeV threshold typical for Water Cherenkov detectors. JUNO's large target mass and excellent energy resolution are prerequisites for reaching unprecedented levels of precision. In this paper, we provide estimation of the JUNO sensitivity to 7Be, pep, and CNO solar neutrinos that can be obtained via a spectral analysis above the 0.45 MeV threshold. This study is performed assuming different scenarios of the liquid scintillator radiopurity, ranging from the most opti mistic one corresponding to the radiopurity levels obtained by the Borexino experiment, up to the minimum requirements needed to perform the neutrino mass ordering determination with reactor antineutrinos - the main goal of JUNO. Our study shows that in most scenarios, JUNO will be able to improve the current best measurements on 7Be, pep, and CNO solar neutrino fluxes. We also perform a study on the JUNO capability to detect periodical time variations in the solar neutrino flux, such as the day-night modulation induced by neutrino flavor regeneration in Earth, and the modulations induced by temperature changes driven by helioseismic waves. △ Less

Submitted 7 March, 2023; originally announced March 2023.

Single and two-cells shape analysis from energy functionals for three-dimensional vertex models

Authors: Ahmad K. Khan, Cécilia Olivesi, Jose J. Muñoz

Abstract: Vertex models have been extensively used for simulating the evolution of multicellular systems, and have given rise to important global properties concerning their macroscopic rheology or jamming transitions. These models are based on the definition of an energy functional, which fully determines the cellular response and conclusions. While two-dimensional vertex models have been widely employed,… ▽ More Vertex models have been extensively used for simulating the evolution of multicellular systems, and have given rise to important global properties concerning their macroscopic rheology or jamming transitions. These models are based on the definition of an energy functional, which fully determines the cellular response and conclusions. While two-dimensional vertex models have been widely employed, three-dimensional models are far more scarce, mainly due to the large amount of configurations that they may adopt and the complex geometrical transitions they undergo. We here investigate the shape of single and two-cells configurations as a function of the energy terms, and we study the dependence of the final shape on the model parameters: namely the exponent of the term penalising cell-cell adhesion and surface contractility. In single cell analysis, we deduce analytically the radius and limit values of the contractility for linear and quadratic surface energy terms, in 2D and 3D. In two-cells systems, we deduce the evolution of the aspect ratio. While in functionals with linear surface terms yield the same aspect ratio in 2D and 3D, the configurations when using quadratic surface terms are distinct. We relate our results with well-known solutions from capillarity theory, and verify our analytical findings with a three-dimensional vertex model. △ Less

Submitted 29 June, 2023; v1 submitted 7 February, 2023; originally announced February 2023.

Comments: Article contents have been updated and modified substantially

Machine Learning based tool for CMS RPC currents quality monitoring

Authors: E. Shumka, A. Samalan, M. Tytgat, M. El Sawy, G. A. Alves, F. Marujo, E. A. Coelho, E. M. Da Costa, H. Nogima, A. Santoro, S. Fonseca De Souza, D. De Jesus Damiao, M. Thiel, K. Mota Amarilo, M. Barroso Ferreira Filho, A. Aleksandrov, R. Hadjiiska, P. Iaydjiev, M. Rodozov, M. Shopova, G. Soultanov, A. Dimitrov, L. Litov, B. Pavlov, P. Petkov , et al. (83 additional authors not shown)

Abstract: The muon system of the CERN Compact Muon Solenoid (CMS) experiment includes more than a thousand Resistive Plate Chambers (RPC). They are gaseous detectors operated in the hostile environment of the CMS underground cavern on the Large Hadron Collider where pp luminosities of up to $2\times 10^{34}$ $\text{cm}^{-2}\text{s}^{-1}$ are routinely achieved. The CMS RPC system performance is constantly m… ▽ More The muon system of the CERN Compact Muon Solenoid (CMS) experiment includes more than a thousand Resistive Plate Chambers (RPC). They are gaseous detectors operated in the hostile environment of the CMS underground cavern on the Large Hadron Collider where pp luminosities of up to $2\times 10^{34}$ $\text{cm}^{-2}\text{s}^{-1}$ are routinely achieved. The CMS RPC system performance is constantly monitored and the detector is regularly maintained to ensure stable operation. The main monitorable characteristics are dark current, efficiency for muon detection, noise rate etc. Herein we describe an automated tool for CMS RPC current monitoring which uses Machine Learning techniques. We further elaborate on the dedicated generalized linear model proposed already and add autoencoder models for self-consistent predictions as well as hybrid models to allow for RPC current predictions in a distant future. △ Less

Submitted 6 February, 2023; originally announced February 2023.

Leveraging generative adversarial networks to create realistic scanning transmission electron microscopy images

Authors: Abid Khan, Chia-Hao Lee, Pinshane Y. Huang, Bryan K. Clark

Abstract: The rise of automation and machine learning (ML) in electron microscopy has the potential to revolutionize materials research through autonomous data collection and processing. A significant challenge lies in developing ML models that rapidly generalize to large data sets under varying experimental conditions. We address this by employing a cycle generative adversarial network (CycleGAN) with a re… ▽ More The rise of automation and machine learning (ML) in electron microscopy has the potential to revolutionize materials research through autonomous data collection and processing. A significant challenge lies in developing ML models that rapidly generalize to large data sets under varying experimental conditions. We address this by employing a cycle generative adversarial network (CycleGAN) with a reciprocal space discriminator, which augments simulated data with realistic spatial frequency information. This allows the CycleGAN to generate images nearly indistinguishable from real data and provide labels for ML applications. We showcase our approach by training a fully convolutional network (FCN) to identify single atom defects in a 4.5 million atom data set, collected using automated acquisition in an aberration-corrected scanning transmission electron microscope (STEM). Our method produces adaptable FCNs that can adjust to dynamically changing experimental variables with minimal intervention, marking a crucial step towards fully autonomous harnessing of microscopy big data. △ Less

Submitted 29 May, 2023; v1 submitted 18 January, 2023; originally announced January 2023.

Comments: 25 pages, 6 figures, 2 tables

Journal ref: npj Computational Materials (2023) 9:8

Epitaxially Driven Phase Selectivity of Sn in Hybrid Quantum Nanowires

Authors: Sabbir A. Khan, Sara Martí-Sánchez, Dags Olsteins, Charalampos Lampadaris, Damon James Carrad, Yu Liu, Judith Quiñones, Maria Chiara Spadaro, Thomas S. Jespersen, Peter Krogstrup, Jordi Arbiol

Abstract: Hybrid semiconductor/superconductor nanowires constitute a pervasive platform for studying gate-tunable superconductivity and the emergence of topological behavior. Their low-dimensionality and crystal structure flexibility facilitate novel heterostructure growth and efficient material optimization; crucial prerequisites for accurately constructing complex multi-component quantum materials. Here,… ▽ More Hybrid semiconductor/superconductor nanowires constitute a pervasive platform for studying gate-tunable superconductivity and the emergence of topological behavior. Their low-dimensionality and crystal structure flexibility facilitate novel heterostructure growth and efficient material optimization; crucial prerequisites for accurately constructing complex multi-component quantum materials. Here, we present an extensive optimization of Sn growth on InSb, InAsSb and InAs nanowires. We demonstrate how the growth conditions and the crystal structure/symmetry of the semiconductor drive the formation of either semi-metallic $\mathrm{α-Sn}$ or superconducting $\mathrm{β-Sn}$. For InAs nanowires, we obtain phase-pure, superconducting $\mathrm{β-Sn}$ shells. However, for InSb and InAsSb nanowires, an initial epitaxial $\mathrm{α-Sn}$ phase evolves into a polycrystalline shell of coexisting $\mathrmα$ and $\mathrmβ$ phases, where the $β/α$ volume ratio increases with Sn shell thickness. Whether these nanowires exhibit superconductivity or not critically relies on the $\mathrm{β-Sn}$ content. Therefore, this work provides key insights into Sn phase control on a variety of semiconductors, with consequences for the yield of superconducting hybrids suitable for generating topological systems. △ Less

Submitted 2 January, 2023; v1 submitted 26 December, 2022; originally announced December 2022.

Comments: 12 pages, 5 figures

RPC based tracking system at CERN GIF++ facility

Authors: K. Mota Amarilo, A. Samalan, M. Tytgat, M. El Sawy, G. A. Alves, F. Marujo, E. A. Coelho, E. M. Da Costa, H. Nogima, A. Santoro, S. Fonseca De Souza, D. De Jesus Damiao, M. Thiel, M. Barroso Ferreira Filho, A. Aleksandrov, R. Hadjiiska, P. Iaydjiev, M. Rodozov, M. Shopova, G. Soultanov, A. Dimitrov, L. Litov, B. Pavlov, P. Petkov, A. Petrov , et al. (83 additional authors not shown)

Abstract: With the HL-LHC upgrade of the LHC machine, an increase of the instantaneous luminosity by a factor of five is expected and the current detection systems need to be validated for such working conditions to ensure stable data taking. At the CERN Gamma Irradiation Facility (GIF++) many muon detectors undergo such studies, but the high gamma background can pose a challenge to the muon trigger system… ▽ More With the HL-LHC upgrade of the LHC machine, an increase of the instantaneous luminosity by a factor of five is expected and the current detection systems need to be validated for such working conditions to ensure stable data taking. At the CERN Gamma Irradiation Facility (GIF++) many muon detectors undergo such studies, but the high gamma background can pose a challenge to the muon trigger system which is exposed to many fake hits from the gamma background. A tracking system using RPCs is implemented to clean the fake hits, taking profit of the high muon efficiency of these chambers. This work will present the tracking system configuration, used detector analysis algorithm and results. △ Less

Submitted 29 November, 2022; originally announced November 2022.

Comments: 12 pages, 9 figures. Contribution to XVI Workshop on Resistive Plate Chambers and Related Detectors (RPC2022), September 26-30 2022. Submitted to Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment

Performance of the CMS High Granularity Calorimeter prototype to charged pion beams of 20$-$300 GeV/c

Authors: B. Acar, G. Adamov, C. Adloff, S. Afanasiev, N. Akchurin, B. Akgün, M. Alhusseini, J. Alison, J. P. Figueiredo de sa Sousa de Almeida, P. G. Dias de Almeida, A. Alpana, M. Alyari, I. Andreev, U. Aras, P. Aspell, I. O. Atakisi, O. Bach, A. Baden, G. Bakas, A. Bakshi, S. Banerjee, P. DeBarbaro, P. Bargassa, D. Barney, F. Beaudette , et al. (435 additional authors not shown)

Abstract: The upgrade of the CMS experiment for the high luminosity operation of the LHC comprises the replacement of the current endcap calorimeter by a high granularity sampling calorimeter (HGCAL). The electromagnetic section of the HGCAL is based on silicon sensors interspersed between lead and copper (or copper tungsten) absorbers. The hadronic section uses layers of stainless steel as an absorbing med… ▽ More The upgrade of the CMS experiment for the high luminosity operation of the LHC comprises the replacement of the current endcap calorimeter by a high granularity sampling calorimeter (HGCAL). The electromagnetic section of the HGCAL is based on silicon sensors interspersed between lead and copper (or copper tungsten) absorbers. The hadronic section uses layers of stainless steel as an absorbing medium and silicon sensors as an active medium in the regions of high radiation exposure, and scintillator tiles directly readout by silicon photomultipliers in the remaining regions. As part of the development of the detector and its readout electronic components, a section of a silicon-based HGCAL prototype detector along with a section of the CALICE AHCAL prototype was exposed to muons, electrons and charged pions in beam test experiments at the H2 beamline at the CERN SPS in October 2018. The AHCAL uses the same technology as foreseen for the HGCAL but with much finer longitudinal segmentation. The performance of the calorimeters in terms of energy response and resolution, longitudinal and transverse shower profiles is studied using negatively charged pions, and is compared to GEANT4 predictions. This is the first report summarizing results of hadronic showers measured by the HGCAL prototype using beam test data. △ Less

Submitted 27 May, 2023; v1 submitted 9 November, 2022; originally announced November 2022.

Comments: Accepted for publication by JINST

Testing The Existence of Single Photons

Authors: Quynh M. Nguyen, Asad Khan

Abstract: We demonstrated the existence of single photon by counting correlation of laser output of a birefringent $β$-Barium Borate (BBO) crystal. The best result of anti-correlation parameter violates the classical prediction for wavelike behavior of light by 80 standard deviations. We demonstrated the existence of single photon by counting correlation of laser output of a birefringent $β$-Barium Borate (BBO) crystal. The best result of anti-correlation parameter violates the classical prediction for wavelike behavior of light by 80 standard deviations. △ Less

Submitted 13 September, 2022; originally announced September 2022.

Large spin Hall conductivity in epitaxial thin films of kagome antiferromagnet Mn$_3$Sn at room temperature

Authors: Himanshu Bangar, Kacho Imtiyaz Ali Khan, Akash Kumar, Niru Chowdhury, Prasanta Kumar Muduli, Pranaba Kishor Muduli

Abstract: Mn$_3$Sn is a non-collinear antiferromagnetic quantum material that exhibits a magnetic Weyl semimetallic state and has great potential for efficient memory devices. High-quality epitaxial $c$-plane Mn$_3$Sn thin films have been grown on a sapphire substrate using a Ru seed layer. Using spin pumping induced inverse spin Hall effect measurements on $c$-plane epitaxial Mn$_3$Sn/Ni$_{80}$Fe$_{20}$, w… ▽ More Mn$_3$Sn is a non-collinear antiferromagnetic quantum material that exhibits a magnetic Weyl semimetallic state and has great potential for efficient memory devices. High-quality epitaxial $c$-plane Mn$_3$Sn thin films have been grown on a sapphire substrate using a Ru seed layer. Using spin pumping induced inverse spin Hall effect measurements on $c$-plane epitaxial Mn$_3$Sn/Ni$_{80}$Fe$_{20}$, we measure spin-diffusion length ($λ_{\rm Mn_3Sn}$), and spin Hall conductivity ($σ_{\rm{SH}}$) of Mn$_3$Sn thin films: $λ_{\rm Mn_3Sn}=0.42\pm 0.04$ nm and $σ_{\rm{SH}}=-702~\hbar/ e~Ω^{-1}$cm$^{-1}$. While $λ_{\rm Mn_3Sn}$ is consistent with earlier studies, $σ_{\rm{SH}}$ is an order of magnitude higher and of the opposite sign. The behavior is explained on the basis of excess Mn, which shifts the Fermi level in our films, leading to the observed behavior. Our findings demonstrate a technique for engineering $σ_{\rm{SH}}$ of Mn$_3$Sn films by employing Mn composition for functional spintronic devices. △ Less

Submitted 6 September, 2022; originally announced September 2022.

Comments: 5 pages, 2 figures

A new matrix representation of the Maxwell equations based on the Riemann-Silberstein-Weber vector for a linear inhomogeneous medium

Authors: Sameen Ahmed Khan, Ramaswamy Jagannathan

Abstract: An eight dimensional matrix representation of the Maxwell equations for a linear inhomogeneous medium has been derived earlier based on the Riemann-Silberstein-Weber vector starting from the equations satisfied by it. A new eight dimensional matrix representation, related to the earlier one by a similarity transformation, is deduced starting ab initio from the Maxwell equations. In this process th… ▽ More An eight dimensional matrix representation of the Maxwell equations for a linear inhomogeneous medium has been derived earlier based on the Riemann-Silberstein-Weber vector starting from the equations satisfied by it. A new eight dimensional matrix representation, related to the earlier one by a similarity transformation, is deduced starting ab initio from the Maxwell equations. In this process the Riemann-Silberstein-Weber vector is obtained as natural basis for the matrix representation of the Maxwell equations. The new representation has a more advantageous structure compared to the earlier one from the point of view of applications. In the case of a homogeneous medium it reduces to a block diagonal form with four two dimensional Pauli matrix blocks along the diagonal and in the case of a linear inhomogeneous medium it should be suitable for studying the propagation of electromagnetic waves adopting the techniques of quantum mechanics. △ Less

Submitted 7 August, 2022; v1 submitted 19 May, 2022; originally announced May 2022.

Comments: 37 pages. A few misleading typing mistakes have been corrected. Some more references have been added. The text has been modified in some places by way of clarification

Improved Gradual Resistive Switching Range and 1000x On/Off Ratio in HfOx RRAM Achieved with a $Ge_2Sb_2Te_5$ Thermal Barrier

Authors: Raisul Islam, Shengjun Qin, Sanchit Deshmukh, Zhouchangwan Yu, Cagil Koroglu, Asir Intisar Khan, Kirstin Schauble, Krishna C. Saraswat, Eric Pop, H. -S. Philip Wong

Abstract: Gradual switching between multiple resistance levels is desirable for analog in-memory computing using resistive random-access memory (RRAM). However, the filamentary switching of $HfO_x$-based conventional RRAM often yields only two stable memory states instead of gradual switching between multiple resistance states. Here, we demonstrate that a thermal barrier of $Ge_2Sb_2Te_5$ (GST) between… ▽ More Gradual switching between multiple resistance levels is desirable for analog in-memory computing using resistive random-access memory (RRAM). However, the filamentary switching of $HfO_x$-based conventional RRAM often yields only two stable memory states instead of gradual switching between multiple resistance states. Here, we demonstrate that a thermal barrier of $Ge_2Sb_2Te_5$ (GST) between $HfO_x$ and the bottom electrode (TiN) enables wider and weaker filaments, by promoting heat spreading laterally inside the $HfO_x$. Scanning thermal microscopy suggests that $HfO_x+GST$ devices have a wider heating region than control devices with only $HfO_x$, indicating the formation of a wider filament. Such wider filaments can have multiple stable conduction paths, resulting in a memory device with more gradual and linear switching. The thermally-enhanced $HfO_x+GST$ devices also have higher on/off ratio ($>10^3$) than control devices ($<10^2$), and a median set voltage lower by approximately 1 V (~35%), with a corresponding reduction of the switching power. Our $HfO_x+GST$ RRAM shows 2x gradual switching range using fast (~ns) identical pulse trains with amplitude less than 2 V. △ Less

Submitted 23 March, 2022; originally announced March 2022.

Theoretical tools for neutrino scattering: interplay between lattice QCD, EFTs, nuclear physics, phenomenology, and neutrino event generators

Authors: L. Alvarez Ruso, A. M. Ankowski, S. Bacca, A. B. Balantekin, J. Carlson, S. Gardiner, R. Gonzalez-Jimenez, R. Gupta, T. J. Hobbs, M. Hoferichter, J. Isaacson, N. Jachowicz, W. I. Jay, T. Katori, F. Kling, A. S. Kronfeld, S. W. Li, H. -W. Lin, K. -F. Liu, A. Lovato, K. Mahn, J. Menendez, A. S. Meyer, J. Morfin, S. Pastore , et al. (36 additional authors not shown)

Abstract: Maximizing the discovery potential of increasingly precise neutrino experiments will require an improved theoretical understanding of neutrino-nucleus cross sections over a wide range of energies. Low-energy interactions are needed to reconstruct the energies of astrophysical neutrinos from supernovae bursts and search for new physics using increasingly precise measurement of coherent elastic neut… ▽ More Maximizing the discovery potential of increasingly precise neutrino experiments will require an improved theoretical understanding of neutrino-nucleus cross sections over a wide range of energies. Low-energy interactions are needed to reconstruct the energies of astrophysical neutrinos from supernovae bursts and search for new physics using increasingly precise measurement of coherent elastic neutrino scattering. Higher-energy interactions involve a variety of reaction mechanisms including quasi-elastic scattering, resonance production, and deep inelastic scattering that must all be included to reliably predict cross sections for energies relevant to DUNE and other accelerator neutrino experiments. This white paper discusses the theoretical status, challenges, required resources, and path forward for achieving precise predictions of neutrino-nucleus scattering and emphasizes the need for a coordinated theoretical effort involved lattice QCD, nuclear effective theories, phenomenological models of the transition region, and event generators. △ Less

Submitted 20 April, 2022; v1 submitted 16 March, 2022; originally announced March 2022.

Comments: 81 pages, contribution to Snowmass 2021

Report number: DESY-22-05, FERMILAB-FN-1161-T, MITP-22-027

Radical-induced Hetero-Nuclear Mixing and Low-field $^{13}$C Relaxation in Solid Pyruvic Acid

Authors: Hana Kouřilová, Michael Jurkutat, David Peat, Karel Kouřil, Alixander S. Khan, Anthony J. Horsewill, James F. MacDonald, John Owers-Bradley, Benno Meier

Abstract: Radicals serve as source in dynamic nuclear polarization, but may also act as polarization sink. If the coupling between the electron spins and different nuclear reservoirs is stronger than any of the reservoirs' couplings to the lattice, radicals can mediate hetero-nuclear mixing. Here, we report radical-enhanced $^{13}$C relaxation in pyruvic acid doped with trityl. We find a linear dependence o… ▽ More Radicals serve as source in dynamic nuclear polarization, but may also act as polarization sink. If the coupling between the electron spins and different nuclear reservoirs is stronger than any of the reservoirs' couplings to the lattice, radicals can mediate hetero-nuclear mixing. Here, we report radical-enhanced $^{13}$C relaxation in pyruvic acid doped with trityl. We find a linear dependence of the carbon $T_1$ on field between 5 mT and 2 T. We extend a model, employed previously for protons, to carbon, and predict efficient proton-carbon mixing via the radical Non-Zeeman reservoir, for fields from 20 mT to beyond 1 T. Discrepancies between the observed carbon relaxation and the model are attributed to enhanced direct hetero-nuclear mixing due to trityl-induced linebroadening, and a field-dependent carbon diffusion from the radical vicinity to the bulk. Measurements of hetero-nuclear polarization transfer up to 600 mT confirm the predicted mixing as well as both effects inferred from the relaxation analysis. △ Less

Submitted 1 August, 2022; v1 submitted 11 February, 2022; originally announced February 2022.

Comments: 6 pages, 3 figures

Approximations for modeling light scattering by spheres with uncertainty in physical parameters

Authors: Akif Khan, Murugesan Venkatapathi

Abstract: Uncertainty in physical parameters can make the solution of forward or inverse light scattering problems in astrophysical, biological, and atmospheric sensing applications, cost prohibitive for real-time applications. For example, given a probability density in the parametric space of dimensions, refractive index and wavelength, the number of required evaluations for the expected scattering increa… ▽ More Uncertainty in physical parameters can make the solution of forward or inverse light scattering problems in astrophysical, biological, and atmospheric sensing applications, cost prohibitive for real-time applications. For example, given a probability density in the parametric space of dimensions, refractive index and wavelength, the number of required evaluations for the expected scattering increases dramatically. In the case of dielectric and weakly absorbing spherical particles (both homogeneous and layered), we begin with a Fraunhofer approximation of the scattering coefficients consisting of Riccati-Bessel functions, and reduce it into simpler nested trigonometric approximations. They provide further computational advantages when parameterized on lines of constant optical path lengths. This can reduce the cost of evaluations by large factors $\approx$ 50, without a loss of accuracy in the integrals of these scattering coefficients. We analyze the errors of the proposed approximation, and present numerical results for a set of forward problems as a demonstration. △ Less

Submitted 27 December, 2021; originally announced December 2021.

Graphics processing unit accelerated lattice Boltzmann method simulations of dilute gravity currents

Authors: Damilola Adekanye, Amirul Khan, Alan Burns, William McCaffrey, Martin Geier, Martin Schönherr, Robert Dorrell

Abstract: Lattice Boltzmann method models offer a novel framework for the simulation of high Reynolds number dilute gravity currents. The numerical algorithm is well suited to acceleration via implementation on massively parallel computer architectures. Here we present two lattice Boltzmann method models of lock-exchange dilute gravity currents, in which the largest turbulent length scales are directly reso… ▽ More Lattice Boltzmann method models offer a novel framework for the simulation of high Reynolds number dilute gravity currents. The numerical algorithm is well suited to acceleration via implementation on massively parallel computer architectures. Here we present two lattice Boltzmann method models of lock-exchange dilute gravity currents, in which the largest turbulent length scales are directly resolved. The three-dimensional simulations are accelerated by exporting computations to a graphics processing unit and are validated against experiments and high-resolution simulations for Reynolds numbers up to 30,000. The lattice Boltzmann method models achieve equivalent accuracy to conventional large eddy simulation models in the prediction of key flow properties. A conservative analysis of computational performance relative to conventional methods indicates that the presented framework reduces simulation times by two orders of magnitude. Therefore, it can be used as a foundation for the development of depth-resolving models that capture more of the complexity of environmental gravity currents. △ Less

Submitted 7 April, 2022; v1 submitted 15 December, 2021; originally announced December 2021.

Comments: 59 pages, 14 figures

Journal ref: Physics of Fluids 34, 046602 (2022)

Multiple Equilibrium States of the Loop Current in the Gulf of Mexico

Authors: Vitalii A. Sheremet, Arham Amin Khan, Joseph Kuehl

Abstract: It is known that western boundary currents, which encounter a gap in their supporting boundary, assume two dominant steady states: a loop current state and a gap leaping state, and that transitions between these states display hysteresis. However, a question of whether the idealized geometries considered to date apply to the Gulf of Mexico Loop Current (LC) remained. Here, the nonlinear potential… ▽ More It is known that western boundary currents, which encounter a gap in their supporting boundary, assume two dominant steady states: a loop current state and a gap leaping state, and that transitions between these states display hysteresis. However, a question of whether the idealized geometries considered to date apply to the Gulf of Mexico Loop Current (LC) remained. Here, the nonlinear potential vorticity advection-diffusions equations are solved, for Gulf of Mexico topography, using Newton's Method. We demonstrate that, in application to the LC in the Gulf of Mexico, the original conclusions do hold and additionally describe peculiarities of the more realistic steady states that have implications for the LC modeling and forecasting. △ Less

Submitted 26 November, 2021; originally announced November 2021.

Response of a CMS HGCAL silicon-pad electromagnetic calorimeter prototype to 20-300 GeV positrons

Authors: B. Acar, G. Adamov, C. Adloff, S. Afanasiev, N. Akchurin, B. Akgün, F. Alam Khan, M. Alhusseini, J. Alison, A. Alpana, G. Altopp, M. Alyari, S. An, S. Anagul, I. Andreev, P. Aspell, I. O. Atakisi, O. Bach, A. Baden, G. Bakas, A. Bakshi, S. Bannerjee, P. Bargassa, D. Barney, F. Beaudette , et al. (364 additional authors not shown)

Abstract: The Compact Muon Solenoid Collaboration is designing a new high-granularity endcap calorimeter, HGCAL, to be installed later this decade. As part of this development work, a prototype system was built, with an electromagnetic section consisting of 14 double-sided structures, providing 28 sampling layers. Each sampling layer has an hexagonal module, where a multipad large-area silicon sensor is glu… ▽ More The Compact Muon Solenoid Collaboration is designing a new high-granularity endcap calorimeter, HGCAL, to be installed later this decade. As part of this development work, a prototype system was built, with an electromagnetic section consisting of 14 double-sided structures, providing 28 sampling layers. Each sampling layer has an hexagonal module, where a multipad large-area silicon sensor is glued between an electronics circuit board and a metal baseplate. The sensor pads of approximately 1 cm$^2$ are wire-bonded to the circuit board and are readout by custom integrated circuits. The prototype was extensively tested with beams at CERN's Super Proton Synchrotron in 2018. Based on the data collected with beams of positrons, with energies ranging from 20 to 300 GeV, measurements of the energy resolution and linearity, the position and angular resolutions, and the shower shapes are presented and compared to a detailed Geant4 simulation. △ Less

Submitted 31 March, 2022; v1 submitted 12 November, 2021; originally announced November 2021.

Ion and Electron Momentum Distributions from Single and Double Ionization of Helium Induced by Compton Scattering

Authors: M. Kircher, F. Trinter, S. Grundmann, G. Kastirke, M. Weller, I. Vela-Perez, A. Khan, C. Janke, M. Waitz, S. Zeller, T. Mletzko, D. Kirchner, V. Honkimäki, S. Houamer, O. Chuluunbaatar, Yu. V. Popov, I. P. Volobuev, M. S. Schöffler, L. Ph. H. Schmidt, T. Jahnke, R. Dörner

Abstract: We present the momentum distributions of the nucleus and of the electrons from double ionization of the helium atom by Compton scattering of photons with $hν=40$ keV. We find that the doubly charged ion momentum distribution is very close to the Compton profile of the nucleus in the ground state of the helium atom, and the momentum distribution of the singly charged ion to give a precise image of… ▽ More We present the momentum distributions of the nucleus and of the electrons from double ionization of the helium atom by Compton scattering of photons with $hν=40$ keV. We find that the doubly charged ion momentum distribution is very close to the Compton profile of the nucleus in the ground state of the helium atom, and the momentum distribution of the singly charged ion to give a precise image of the electron Compton profile. To reproduce these results, non-relativistic calculations require the use of highly correlated initial- and final-state wavefunctions. △ Less

Submitted 19 October, 2021; originally announced October 2021.

Comments: 5 pages, 3 figures

Journal ref: Phys. Rev. Lett. 128, 053001 (2022)

The Tidal-Thermal Evolution of the Pluto-Charon System

Authors: Amirhossein Bagheri, Amir Khan, Frederic Deschamps, Henri Samuel, Mikhail Kruglyakov, Domenico Giardini

Abstract: Existence of subsurface oceans on the satellites of the giant planets and Trans-Neptunian objects has been predicted for some time. Oceans on icy worlds exert a considerable influence on the dynamics of the ice-ocean system and, because of the astrobiological potential, represent an important objective for future missions. The Pluto-Charon system is representative of an icy moon orbiting a dwarf p… ▽ More Existence of subsurface oceans on the satellites of the giant planets and Trans-Neptunian objects has been predicted for some time. Oceans on icy worlds exert a considerable influence on the dynamics of the ice-ocean system and, because of the astrobiological potential, represent an important objective for future missions. The Pluto-Charon system is representative of an icy moon orbiting a dwarf planet formed from the remnants of a giant impact. Evolution of icy moons is primarily controlled by the mode and efficiency of heat transfer through the outer ice shell, which is influenced by the presence of impurities, by tidal dissipation in the ice shell, and the radioactive element budget in the core. Previous studies on the evolution of the Pluto-Charon system considered either only the thermal or the tidal evolution, and in the cases where both were considered, the important effect of the presence of impurities in the liquid oceans was not addressed. We consider the joint tidal-thermal evolution of the system by combining a comprehensive tidal model that incorporates a viscoelastic tidal response with a parameterized convection model developed for icy worlds. This approach enables an extensive analysis of the conditions required for formation and maintenance of subsurface liquid oceans to the present. Our results show that because of fast circularization and synchronization of the orbits, tidal heating is only important during the early stages of evolution (<1 Myr). We test the sensitivity of our results to the initial orbital and thermal parameters. In all the cases, oceans on Pluto are always predicted to remain liquid to the present, ranging from 40 km to 150-km thick, whereas oceans on Charon have solidified. This is supported by New Horizons observations of extensional faults on Pluto and both extensional and compressional faults on Charon. △ Less

Submitted 27 September, 2021; originally announced September 2021.

Machine Learning Application for $\mathbfΛ$ Hyperon Reconstruction in CBM at FAIR

Authors: Shahid Khan, Viktor Klochkov, Olha Lavoryk, Oleksii Lubynets, Ali Imdad Khan, Andrea Dubla, Ilya Selyuzhenkov

Abstract: The Compressed Baryonic Matter experiment at FAIR will investigate the QCD phase diagram in the region of high net-baryon densities. Enhanced production of strange baryons, such as the most abundantly produced $Λ$ hyperons, can signal transition to a new phase of the QCD matter. In this work, the CBM performance for reconstruction of the $Λ$ hyperon via its decay to proton and $π^{-}$ is presented… ▽ More The Compressed Baryonic Matter experiment at FAIR will investigate the QCD phase diagram in the region of high net-baryon densities. Enhanced production of strange baryons, such as the most abundantly produced $Λ$ hyperons, can signal transition to a new phase of the QCD matter. In this work, the CBM performance for reconstruction of the $Λ$ hyperon via its decay to proton and $π^{-}$ is presented. Decay topology reconstruction is implemented in the Particle-Finder Simple (PFSimple) package with Machine Learning algorithms providing efficient selection of the decays and high signal to background ratio. △ Less

Submitted 30 August, 2021; originally announced September 2021.

Terahertz birefringent gratings for filtering and dispersion compensation

Authors: Muhammad Talal Ali Khan, Haisu Li, Yajing Liu, Gang-Ding Peng, Shaghik Atakaramians

Abstract: The recent development of the terahertz waveguide makes it an excellent platform for integrating many intriguing functionalities, which offers tremendous potential to build compact and robust terahertz systems. In the context of next-generation high-speed communication links at the terahertz band, engineering the dispersion and birefringence of terahertz waves is essential. Here, we experimentally… ▽ More The recent development of the terahertz waveguide makes it an excellent platform for integrating many intriguing functionalities, which offers tremendous potential to build compact and robust terahertz systems. In the context of next-generation high-speed communication links at the terahertz band, engineering the dispersion and birefringence of terahertz waves is essential. Here, we experimentally demonstrate subwavelength birefringent waveguide gratings based on the low-loss cyclic olefin copolymer exploiting micro-machining fabrication techniques. Asymmetric cross-section and periodic-structural modulation along propagation direction are introduced to achieve birefringent THz grating for filtering and dispersion compensation. Because of strong index modulation in the subwavelength fiber, a high negative group velocity dispersion of -188 (-88) ps/mm/THz is achieved at 0.15 THz for x-polarization (y-polarization), i.e., 7.5 times increase compared to the state-of-the-art reported to date. Such high negative dispersion is realized in a 43 mm grating length, which is less than half of the length reported until now (e.g., 100 mm). Further, the subwavelength fiber grating filters two orthogonal polarization states and exhibits transmission dips with 8.5-dB and 7.5-dB extinction ratios for x and y polarization, respectively. Our experiment demonstrates the feasibility of using polymer-based terahertz gratings as a dispersion compensator in terahertz communications and steering polarized terahertz radiations for polarization-sensitive THz systems. △ Less

Submitted 25 August, 2021; originally announced August 2021.

Enhanced Meta-Displays Using Advanced Phase-Change Materials

Authors: Omid Hemmatyar, Sajjad Abdollahramezani, Ioannis Zeimpekis, Sergey Lepeshov, Alex Krasnok, Asir Intisar Khan, Kathryn M. Neilson, Christian Teichrib, Tyler Brown, Eric Pop, Daniel W. Hewak, Matthias Wuttig, Andrea Alu, Otto L. Muskens, Ali Adibi

Abstract: Structural colors generated due to light scattering from static all-dielectric metasurfaces have successfully enabled high-resolution, high-saturation, and wide-gamut color printing applications. Despite recent advances, most demonstrations of these structure-dependent colors lack post-fabrication tunability. This hinders their applicability for front-end dynamic display technologies. Phase-change… ▽ More Structural colors generated due to light scattering from static all-dielectric metasurfaces have successfully enabled high-resolution, high-saturation, and wide-gamut color printing applications. Despite recent advances, most demonstrations of these structure-dependent colors lack post-fabrication tunability. This hinders their applicability for front-end dynamic display technologies. Phase-change materials (PCMs), with significant contrast of their optical properties between their amorphous and crystalline states, have demonstrated promising potentials in reconfigurable nanophotonics. Herein, we leverage tunable all-dielectric reflective metasurfaces made of newly emerged classes of low-loss optical PCMs, i.e., antimony trisulphide (Sb$_2$S$_3$) and antimony triselenide (Sb$_2$Se$_3$), with superb characteristics to realize switchable, high-saturation, high-efficiency and high-resolution dynamic meta-pixels. Exploiting polarization-sensitive building blocks, the presented meta-pixel can generate two different colors when illuminated by either one of two orthogonally polarized incident beams. Such degrees of freedom (i.e., material phase and polarization state) enable a single reconfigurable metasurface with fixed geometrical parameters to generate four distinct wide-gamut colors. We experimentally demonstrate, for the first time, an electrically-driven micro-scale display through the integration of phase-change metasurfaces with an on-chip heater formed by transparent conductive oxide. Our experimental findings enable a versatile platform suitable for a wide range of applications, including tunable full-color printing, enhanced dynamic displays, information encryption, and anti-counterfeiting. △ Less

Submitted 19 July, 2021; originally announced July 2021.

Comments: arXiv admin note: substantial text overlap with arXiv:2105.01313

Lateral Transport and Field-Effect Characteristics of Sputtered P-Type Chalcogenide Thin Films

Authors: Sumaiya Wahid, Alwin Daus, Asir Intisar Khan, Victoria Chen, Kathryn M. Neilson, Mahnaz Islam, Eric Pop

Abstract: Investigating lateral electrical transport in p-type thin film chalcogenides is important to evaluate their potential for field-effect transistors (FETs) and phase-change memory applications. For instance, p-type FETs with sputtered materials at low temperature (<= 250 C) could play a role in flexible electronics or back-end-of-line (BEOL) silicon-compatible processes. Here, we explore lateral tra… ▽ More Investigating lateral electrical transport in p-type thin film chalcogenides is important to evaluate their potential for field-effect transistors (FETs) and phase-change memory applications. For instance, p-type FETs with sputtered materials at low temperature (<= 250 C) could play a role in flexible electronics or back-end-of-line (BEOL) silicon-compatible processes. Here, we explore lateral transport in chalcogenide films (Sb2Te3, Ge2Sb2Te5, Ge4Sb6Te7) and multilayers, with Hall measurements (in <= 50 nm thin films) and with p-type transistors (in <= 5 nm ultrathin films). The highest Hall mobilities are measured for Sb2Te3/GeTe superlattices (~18 cm2/V/s at room temperature), over 2-3x higher than the other films. In ultrathin p-type FETs with Ge2Sb2Te5, we achieve field-effect mobility up to ~5.5 cm2/V/s with current on/off ratio ~10000, the highest for Ge2Sb2Te5 transistors to date. We also explore process optimizations (e.g., AlOx capping layer, type of developer for lithography) and uncover their trade-offs towards the realization of p-type transistors with acceptable mobility and on/off current ratio. Our study provides essential insights into the optimization of electronic devices based on p-type chalcogenides. △ Less

Submitted 17 July, 2021; originally announced July 2021.

Alpha backgrounds in the AMoRE-Pilot experiment

Authors: V. Alenkov, H. W. Bae, J. Beyer, R. S. Boiko, K. Boonin, O. Buzanov, N. Chanthima, M. K. Cheoun, S. H. Choi, F. A. Danevich, M. Djamal, D. Drung, C. Enss, A. Fleischmann, A. Gangapshev, L. Gastaldo, Yu. M. Gavriljuk, A. Gezhaev, V. D. Grigoryeva, V. Gurentsov, D. H. Ha, C. Ha, E. J. Ha, I. Hahn, E. J. Jeon , et al. (81 additional authors not shown)

Abstract: The Advanced Mo-based Rare process Experiment (AMoRE)-Pilot experiment is an initial phase of the AMoRE search for neutrinoless double beta decay of $^{100}$Mo, with the purpose of investigating the level and sources of backgrounds. Searches for neutrinoless double beta decay generally require ultimately low backgrounds. Surface $α$ decays on the crystals themselves or nearby materials can deposit… ▽ More The Advanced Mo-based Rare process Experiment (AMoRE)-Pilot experiment is an initial phase of the AMoRE search for neutrinoless double beta decay of $^{100}$Mo, with the purpose of investigating the level and sources of backgrounds. Searches for neutrinoless double beta decay generally require ultimately low backgrounds. Surface $α$ decays on the crystals themselves or nearby materials can deposit a continuum of energies that can be as high as the $Q$-value of the decay itself and may fall in the region of interest (ROI). To understand these background events, we studied backgrounds from radioactive contaminations internal to and on the surface of the crystals or nearby materials with Geant4-based Monte Carlo simulations. In this study, we report on the measured $α$ energy spectra fitted with the corresponding simulated spectra for six crystal detectors, where sources of background contributions could be identified through high energy $α$ peaks and continuum parts in the energy spectrum for both internal and surface contaminations. We determine the low-energy contributions from internal and surface $α$ contaminations by extrapolating from the $α$ background fitting model. △ Less

Submitted 5 December, 2022; v1 submitted 16 July, 2021; originally announced July 2021.

Photoelectron circular dichroism of O 1$s$-photoelectrons of uniaxially oriented trifluoromethyloxirane: Energy dependence and sensitivity to molecular configuration

Authors: G. Nalin, K. Fehre, F. Trinter, N. M. Novikovskiy, N. Anders, D. Trabert, S. Grundmann, M. Kircher, A. Khan, R. Tomar, M. Hofmann, M. Waitz, I. Vela-Perez, H. Fukuzawa, K. Ueda, J. Williams, D. Kargin, M. Maurer, C. Küstner-Wetekam, L. Marder, J. Viehmann, A. Knie, T. Jahnke, M. Ilchen, R. Dörner , et al. (3 additional authors not shown)

Abstract: The photoelectron circular dichroism (PECD) of the O 1s-photoelectrons of trifluoromethyloxirane(TFMOx) is studied experimentally and theoretically for different photoelectron kinetic energies. The experiments were performed employing circularly polarized synchrotron radiation and coincidentelectron and fragment ion detection using Cold Target Recoil Ion Momentum Spectroscopy. The corresponding ca… ▽ More The photoelectron circular dichroism (PECD) of the O 1s-photoelectrons of trifluoromethyloxirane(TFMOx) is studied experimentally and theoretically for different photoelectron kinetic energies. The experiments were performed employing circularly polarized synchrotron radiation and coincidentelectron and fragment ion detection using Cold Target Recoil Ion Momentum Spectroscopy. The corresponding calculations were performed by means of the Single Center method within the relaxed-core Hartree-Fock approximation. We concentrate on the energy dependence of the differential PECD of uniaxially oriented TFMOx molecules, which is accessible through the employed coincident detection. We also compare results for differential PECD of TFMOx to those obtained for the equivalent fragmentation channel and similar photoelectron kinetic energy of methyloxirane (MOx), studied in our previous work. Thereby, we investigate the influence of the substitution of the methyl-group by the trifluoromethyl-group at the chiral center on the molecular chiral response. Finally, the presently obtained angular distribution parameters are compared to those available in literature. △ Less

Submitted 15 June, 2021; originally announced June 2021.

Comments: 6 figs

Journal ref: Phys. Chem. Chem. Phys. 23, 17248 (2021)

Benchmarking the Performance of Bayesian Optimization across Multiple Experimental Materials Science Domains

Authors: Qiaohao Liang, Aldair E. Gongora, Zekun Ren, Armi Tiihonen, Zhe Liu, Shijing Sun, James R. Deneault, Daniil Bash, Flore Mekki-Berrada, Saif A. Khan, Kedar Hippalgaonkar, Benji Maruyama, Keith A. Brown, John Fisher III, Tonio Buonassisi

Abstract: In the field of machine learning (ML) for materials optimization, active learning algorithms, such as Bayesian Optimization (BO), have been leveraged for guiding autonomous and high-throughput experimentation systems. However, very few studies have evaluated the efficiency of BO as a general optimization algorithm across a broad range of experimental materials science domains. In this work, we eva… ▽ More In the field of machine learning (ML) for materials optimization, active learning algorithms, such as Bayesian Optimization (BO), have been leveraged for guiding autonomous and high-throughput experimentation systems. However, very few studies have evaluated the efficiency of BO as a general optimization algorithm across a broad range of experimental materials science domains. In this work, we evaluate the performance of BO algorithms with a collection of surrogate model and acquisition function pairs across five diverse experimental materials systems, namely carbon nanotube polymer blends, silver nanoparticles, lead-halide perovskites, as well as additively manufactured polymer structures and shapes. By defining acceleration and enhancement metrics for general materials optimization objectives, we find that for surrogate model selection, Gaussian Process (GP) with anisotropic kernels (automatic relevance detection, ARD) and Random Forests (RF) have comparable performance and both outperform the commonly used GP without ARD. We discuss the implicit distributional assumptions of RF and GP, and the benefits of using GP with anisotropic kernels in detail. We provide practical insights for experimentalists on surrogate model selection of BO during materials optimization campaigns. △ Less

Submitted 23 May, 2021; originally announced June 2021.

Antiferroelectric negative capacitance from a structural phase transition in zirconia

Authors: Michael Hoffmann, Zheng Wang, Nujhat Tasneem, Ahmad Zubair, Prasanna Venkat Ravindran, Mengkun Tian, Anthony Gaskell, Dina Triyoso, Steven Consiglio, Kanda Tapily, Robert Clark, Jae Hur, Sai Surya Kiran Pentapati, Milan Dopita, Shimeng Yu, Winston Chern, Josh Kacher, Sebastian E. Reyes-Lillo, Dimitri Antoniadis, Jayakanth Ravichandran, Stefan Slesazeck, Thomas Mikolajick, Asif Islam Khan

Abstract: Crystalline materials with broken inversion symmetry can exhibit a spontaneous electric polarization, which originates from a microscopic electric dipole moment. Long-range polar or anti-polar order of such permanent dipoles gives rise to ferroelectricity or antiferroelectricity, respectively. However, the recently discovered antiferroelectrics of fluorite structure (HfO$_2$ and ZrO$_2$) are diffe… ▽ More Crystalline materials with broken inversion symmetry can exhibit a spontaneous electric polarization, which originates from a microscopic electric dipole moment. Long-range polar or anti-polar order of such permanent dipoles gives rise to ferroelectricity or antiferroelectricity, respectively. However, the recently discovered antiferroelectrics of fluorite structure (HfO$_2$ and ZrO$_2$) are different: A non-polar phase transforms into a polar phase by spontaneous inversion symmetry breaking upon the application of an electric field. Here, we show that this structural transition in antiferroelectric ZrO$_2$ gives rise to a negative capacitance, which is promising for overcoming the fundamental limits of energy efficiency in electronics. Our findings provide insight into the thermodynamically 'forbidden' region of the antiferroelectric transition in ZrO$_2$ and extend the concept of negative capacitance beyond ferroelectricity. This shows that negative capacitance is a more general phenomenon than previously thought and can be expected in a much broader range of materials exhibiting structural phase transitions. △ Less

Submitted 21 April, 2021; originally announced April 2021.

Femtosecond laser micromachining of diamond: current research status, applications and challenges

Authors: Bakhtiar Ali Khan, Igor V. Litvinyuk, Maksym Rybachuk

Abstract: Ultra-fast femtosecond (fs) lasers provide a unique technological opportunity to precisely and efficiently micromachine materials with minimal thermal damage owing to the reduced heat transfer into the bulk of the work material offered by short pulse duration, high laser intensity and focused optical energy delivered on a timescale shorter than the rate of thermal diffusion into the surrounding ar… ▽ More Ultra-fast femtosecond (fs) lasers provide a unique technological opportunity to precisely and efficiently micromachine materials with minimal thermal damage owing to the reduced heat transfer into the bulk of the work material offered by short pulse duration, high laser intensity and focused optical energy delivered on a timescale shorter than the rate of thermal diffusion into the surrounding area of a beam foci. There is an increasing demand to further develop the fs machining technology to improve the machining quality, minimize the total machining time and increase the flexibility of machining complex patterns on diamond. This article offers an overview of recent research findings on the application of fs laser technology to micromachine diamond. The laser technology to precisely micromachine diamond is discussed and detailed, with a focus on the use of fs laser irradiation systems and their characteristics, laser interaction with various types of diamonds, processing and the subsequent post-processing of the irradiated samples and, appropriate sample characterisation methods. Finally, the current and emerging application areas are discussed, and the challenges and the future research prospects in the fs laser micromachining field are also identified. △ Less

Submitted 24 February, 2021; originally announced March 2021.

Comments: 56 pages, 14 figures

Multiterminal Quantized Conductance in InSb Nanocrosses

Authors: Sabbir A. Khan, Lukas Stampfer, Timo Mutas, Jung-Hyun Kang, Peter Krogstrup, Thomas S. Jespersen

Abstract: By studying the time-dependent axial and radial growth of InSb nanowires, we map the conditions for the synthesis of single-crystalline InSb nanocrosses by molecular beam epitaxy. Low-temperature electrical measurements of InSb nanocross devices with local gate control on individual terminals exhibit quantized conductance and are used to probe the spatial distribution of the conducting channels. T… ▽ More By studying the time-dependent axial and radial growth of InSb nanowires, we map the conditions for the synthesis of single-crystalline InSb nanocrosses by molecular beam epitaxy. Low-temperature electrical measurements of InSb nanocross devices with local gate control on individual terminals exhibit quantized conductance and are used to probe the spatial distribution of the conducting channels. Tuning to a situation where the nanocross junction is connected by few-channel quantum point contacts in the connecting nanowire terminals, we show that transport through the junction is ballistic except close to pinch-off. Combined with a new concept for shadow-epitaxy of patterned superconductors on nanocrosses, the structures reported here show promise for the realization of non-trivial topological states in multi-terminal Josephson Junctions. △ Less

Submitted 7 January, 2021; originally announced January 2021.

Comments: 9 pages, 5 figures

An Electronic Textile Embedded Smart Cementitious Composite

Authors: Muhammad S Irfan, Muhammad A Ali, Kamran A Khan, Rehan Umer, Antonios Kanellopoulos, Yarjan A Samad

Abstract: Structural health monitoring (SHM) using self-sensing cement-based materials has been reported before, where nano-fillers have been incorporated in cementitious matrices as functional sensing elements. A percolation threshold is always required in order for conductive nano-fillers modified concrete to be useful for SHM. Nonetheless, the best pressure/strain sensitivity results achieved for any sel… ▽ More Structural health monitoring (SHM) using self-sensing cement-based materials has been reported before, where nano-fillers have been incorporated in cementitious matrices as functional sensing elements. A percolation threshold is always required in order for conductive nano-fillers modified concrete to be useful for SHM. Nonetheless, the best pressure/strain sensitivity results achieved for any self-sensing cementitious matrix are <0.01 MPa-1. In this work, we introduce novel reduced graphene oxide (RGO) based electronic textile (e-textile) embedded in plain and polymer-binder-modified cementitious matrix for SHM applications. As a proof of concept, it was demonstrated that these coated fabric-based sensors can be successfully embedded within the cement-based structures, which are independent of any percolation threshold due to the interconnected fabric inside the host matrix. The piezo-resistive response was measured by applying direct and cyclic compressive loads (0.1 to 3.9 MPa). A pressure sensitivity of 1.5 MPa-1 and an ultra-high gauge factor of 2000 was obtained for the system of the self-sensing cementitious structure with embedded e-textiles. The sensitivity of this new system with embedded e-textile is many orders of magnitude higher than nanoparticle based self-sensing of cementitious composites. The manufactured e-textile sensors showed mechanical stability and functional durability over long-term cyclic compression tests of 1000 cycles. △ Less

Submitted 31 December, 2020; originally announced January 2021.

Calibration Strategy of the JUNO Experiment

Authors: JUNO collaboration, Angel Abusleme, Thomas Adam, Shakeel Ahmad, Rizwan Ahmed, Sebastiano Aiello, Muhammad Akram, Fengpeng An, Guangpeng An, Qi An, Giuseppe Andronico, Nikolay Anfimov, Vito Antonelli, Tatiana Antoshkina, Burin Asavapibhop, João Pedro Athayde Marcondes de André, Didier Auguste, Andrej Babic, Wander Baldini, Andrea Barresi, Eric Baussan, Marco Bellato, Antonio Bergnoli, Enrico Bernieri, Thilo Birkenfeld , et al. (571 additional authors not shown)

Abstract: We present the calibration strategy for the 20 kton liquid scintillator central detector of the Jiangmen Underground Neutrino Observatory (JUNO). By utilizing a comprehensive multiple-source and multiple-positional calibration program, in combination with a novel dual calorimetry technique exploiting two independent photosensors and readout systems, we demonstrate that the JUNO central detector ca… ▽ More We present the calibration strategy for the 20 kton liquid scintillator central detector of the Jiangmen Underground Neutrino Observatory (JUNO). By utilizing a comprehensive multiple-source and multiple-positional calibration program, in combination with a novel dual calorimetry technique exploiting two independent photosensors and readout systems, we demonstrate that the JUNO central detector can achieve a better than 1% energy linearity and a 3% effective energy resolution, required by the neutrino mass ordering determination. △ Less

Submitted 20 January, 2021; v1 submitted 12 November, 2020; originally announced November 2020.

3D-Printed Terahertz Topological Waveguides

Authors: Muhammad Talal Ali Khan, Haisu Li, Nathan Nam Minh Duong, Andrea Blanco-Redondo, Shaghik Atakaramians

Abstract: Compact and robust waveguide chips are crucial for new integrated terahertz applications, such as high-speed interconnections between processors and broadband short-range wireless communications. Progress on topological photonic crystals shows potential to improve integrated terahertz systems that suffer from high losses around sharp bends. Robust terahertz topological transport through sharp bend… ▽ More Compact and robust waveguide chips are crucial for new integrated terahertz applications, such as high-speed interconnections between processors and broadband short-range wireless communications. Progress on topological photonic crystals shows potential to improve integrated terahertz systems that suffer from high losses around sharp bends. Robust terahertz topological transport through sharp bends on a silicon chip has been recently reported over a relatively narrow bandwidth. Here, we report the experimental demonstration of topological terahertz planar air-channel metallic waveguides which can be integrated into an on-chip interconnect. Our platform can be fabricated by a simple, cost-effective technique combining 3D-printing and gold-sputtering. The relative size of the measured topological bandgap is ~12.5%, which entails significant improvement over all-silicon terahertz topological waveguides (~7.8%). We further demonstrate robust THz propagation around defects and delay lines. Our work provides a promising path towards compact integrated terahertz devices as a next frontier for terahertz wireless communications. △ Less

Submitted 21 September, 2020; originally announced October 2020.

Comments: 18 pages, 4 figures

Comparison of existing aneurysm models and their path forward

Authors: John Friesen, Jonas Bergner, Mohammad Ibrahim Aftab Khan, Stefan Triess, Andreas Zoll, Peter F. Pelz, Farzin Adili

Abstract: The two most important aneurysm types are cerebral aneurysms (CA) and abdominal aortic aneurysms (AAA), accounting together for over 80\% of all fatal aneurysm incidences. To minimise aneurysm related deaths, clinicians require various tools to accurately estimate its rupture risk. For both aneurysm types, the current state-of-the-art tools to evaluate rupture risk are identified and evaluated in… ▽ More The two most important aneurysm types are cerebral aneurysms (CA) and abdominal aortic aneurysms (AAA), accounting together for over 80\% of all fatal aneurysm incidences. To minimise aneurysm related deaths, clinicians require various tools to accurately estimate its rupture risk. For both aneurysm types, the current state-of-the-art tools to evaluate rupture risk are identified and evaluated in terms of clinical applicability. We perform a comprehensive literature review, using the Web of Science database. Identified records (3127) are clustered by modelling approach and aneurysm location in a meta-analysis to quantify scientific relevance and to extract modelling patterns and further assessed according to PRISMA guidelines (179 full text screens). Beside general differences and similarities of CA and AAA, we identify and systematically evaluate four major modelling approaches on aneurysm rupture risk: finite element analysis and computational fluid dynamics as deterministic approaches and machine learning and assessment-tools and dimensionless parameters as stochastic approaches. The latter score highest in the evaluation for their potential as clinical applications for rupture prediction, due to readiness level and user friendliness. Deterministic approaches are less likely to be applied in a clinical environment because of their high model complexity. Because deterministic approaches consider underlying mechanism for aneurysm rupture, they have improved capability to account for unusual patient-specific characteristics, compared to stochastic approaches. We show that an increased interdisciplinary exchange between specialists can boost comprehension of this disease to design tools for a clinical environment. By combining deterministic and stochastic models, advantages of both approaches can improve accessibility for clinicians and prediction quality for rupture risk. △ Less

Submitted 1 October, 2020; originally announced October 2020.

Comments: 46 pages, 5 figures

Quantum mechanics of round magnetic electron lenses with Glaser and power law models of $B(z)$

Authors: Sameen Ahmed Khan, Ramaswamy Jagannathan

Abstract: Scalar theory of quantum electron beam optics, at the single-particle level, derived from the Dirac equation using a Foldy-Wouthuysen-like transformation technique is considered. Round magnetic electron lenses with Glaser and power law models for the axial magnetic field $B(z)$ are studied. Paraxial quantum propagator for the Glaser model lens is obtained in terms of the well known fundamental sol… ▽ More Scalar theory of quantum electron beam optics, at the single-particle level, derived from the Dirac equation using a Foldy-Wouthuysen-like transformation technique is considered. Round magnetic electron lenses with Glaser and power law models for the axial magnetic field $B(z)$ are studied. Paraxial quantum propagator for the Glaser model lens is obtained in terms of the well known fundamental solutions of its paraxial equation of motion. In the case of lenses with the power law model for $B(z)$ the well known fundamental solutions of the paraxial equations, obtained by solving the differential equation, are constructed using the Peano-Baker series also. Quantum mechanics of aberrations is discussed briefly. Role of quantum uncertainties in aberrations, and in the nonlinear part of the equations of motion for a nonparaxial beam, is pointed out. The main purpose of this article is to understand the quantum mechanics of electron beam optics though the influence of quantum effects on the optics of present-day electron beam devices might be negligible. △ Less

Submitted 12 January, 2021; v1 submitted 29 September, 2020; originally announced September 2020.

Comments: 40 pages. Two equations, (24) and (25), have been added. To appear in Optik

Journal ref: Optik - International Journal for Light and Electron Optics 229 (2021) 166303

Exploring the near-surface at the lunar South Pole with geophysical tools

Authors: C. Schmelzbach, S. Stähler, N. C. Schmerr, M. Knapmeyer, D. Sollberger, P. Edme, A. Khan, N. Brinkman, L. Ferraioli, J. O. A. Robertsson, D. Giardini

Abstract: Geophysical imaging of the lunar near-surface structure will be key for in situ resource utilization, identification of hazards for crews and infrastructure, and answering science questions on the formation and interior of the Moon. The goal of this white paper is to highlight the value of ground-based geophysical experiments by a crew and to outline a series of experiments to address key science… ▽ More Geophysical imaging of the lunar near-surface structure will be key for in situ resource utilization, identification of hazards for crews and infrastructure, and answering science questions on the formation and interior of the Moon. The goal of this white paper is to highlight the value of ground-based geophysical experiments by a crew and to outline a series of experiments to address key science questions. Specifically, we propose for the Artemis III crewed mission multidisciplinary investigations using geophysical methods such as seismic, seismological, ground penetrating radar, and electromagnetic techniques. We identified a series of prime near-surface targets for such geophysical investigations: (1) establishing a lunar fault monitoring observatory across a lobate scarp to study recent lunar seismicity, (2) determining the physical properties of the regolith at the landing site, (3) investigating the structure and in-situ properties of permanently shadowed regions in the context of the search for water ice and other cold-trapped volatiles, and (4) imaging the interior structure of the South-Pole Aitken basin. Beyond Artemis III, the Moon will serve as a comprehensive testbed for extra-terrestrial geophysics. Hence, lessons learned from human geophysical exploration of the Moon will be key for the exploration of the moons of Mars and near-Earth object(s), and prepare us for the human exploration of space beyond the Moon. △ Less

Submitted 27 September, 2020; originally announced September 2020.

Comments: 2 pages, 1 figure, 27 references

Inverse variational problem for nonlinear dynamical systems

Authors: Basir Ahamed Khan, Supriya Chatterjee, Golam Ali Sekh, Benoy Talukdar

Abstract: In this paper we have chosen to work with two different approaches to solving the inverse problem of the calculus of variation. The first approach is based on an integral representation of the Lagrangian function that uses the first integral of the equation of motion while the second one relies on a generalization of the well known Noether's theorem and constructs the Lagrangian directly from the… ▽ More In this paper we have chosen to work with two different approaches to solving the inverse problem of the calculus of variation. The first approach is based on an integral representation of the Lagrangian function that uses the first integral of the equation of motion while the second one relies on a generalization of the well known Noether's theorem and constructs the Lagrangian directly from the equation of motion. As an application of the integral representation of the Lagrangian function we first provide some useful remarks for the Lagrangian of the modified Emden-type equation and then obtain results for Lagrangian functions of (i) cubic-quintic Duffing oscillator, (ii) Liénard-type oscillator and (iii) Mathews-Lakshmanan oscillator. As with the modified Emden-type equation these oscillators were found to be characterized by nonstandard Lagrangians except that one could also assign a standard Lagrangian to the Duffing oscillator. We used the second approach to find indirect analytic (Lagrangian) representation for three velocity-dependent equations for (iv) Abraham-Lorentz oscillator, (v) Lorentz oscillator and (vi) Van der Pol oscillator. For each of the dynamical systems from (i)-(vi) we calculated the result for Jacobi integral and thereby provided a method to obtain the Hamiltonian function without taking recourse to the use of the so-called Legendre transformation. △ Less

Submitted 3 August, 2020; originally announced August 2020.

Comments: 11 pages, 0 figures