-
Projected background and sensitivity of AMoRE-II
Authors:
A. Agrawal,
V. V. Alenkov,
P. Aryal,
J. Beyer,
B. Bhandari,
R. S. Boiko,
K. Boonin,
O. Buzanov,
C. R. Byeon,
N. Chanthima,
M. K. Cheoun,
J. S. Choe,
Seonho Choi,
S. Choudhury,
J. S. Chung,
F. A. Danevich,
M. Djamal,
D. Drung,
C. Enss,
A. Fleischmann,
A. M. Gangapshev,
L. Gastaldo,
Y. M. Gavrilyuk,
A. M. Gezhaev,
O. Gileva
, et al. (81 additional authors not shown)
Abstract:
AMoRE-II aims to search for neutrinoless double beta decay with an array of 423 Li$_2$$^{100}$MoO$_4$ crystals operating in the cryogenic system as the main phase of the Advanced Molybdenum-based Rare process Experiment (AMoRE). AMoRE has been planned to operate in three phases: AMoRE-pilot, AMoRE-I, and AMoRE-II. AMoRE-II is currently being installed at the Yemi Underground Laboratory, located ap…
▽ More
AMoRE-II aims to search for neutrinoless double beta decay with an array of 423 Li$_2$$^{100}$MoO$_4$ crystals operating in the cryogenic system as the main phase of the Advanced Molybdenum-based Rare process Experiment (AMoRE). AMoRE has been planned to operate in three phases: AMoRE-pilot, AMoRE-I, and AMoRE-II. AMoRE-II is currently being installed at the Yemi Underground Laboratory, located approximately 1000 meters deep in Jeongseon, Korea. The goal of AMoRE-II is to reach up to $T^{0νββ}_{1/2}$ $\sim$ 6 $\times$ 10$^{26}$ years, corresponding to an effective Majorana mass of 15 - 29 meV, covering all the inverted mass hierarchy regions. To achieve this, the background level of the experimental configurations and possible background sources of gamma and beta events should be well understood. We have intensively performed Monte Carlo simulations using the GEANT4 toolkit in all the experimental configurations with potential sources. We report the estimated background level that meets the 10$^{-4}$counts/(keV$\cdot$kg$\cdot$yr) requirement for AMoRE-II in the region of interest (ROI) and show the projected half-life sensitivity based on the simulation study.
△ Less
Submitted 13 June, 2024;
originally announced June 2024.
-
The impact of complexity in the built environment on vehicular routing behavior: Insights from an empirical study of taxi mobility in Beijing, China
Authors:
Chaogui Kang,
Zheren Liu
Abstract:
The modeling of disaggregated vehicular mobility and its associations with the ambient urban built environment is essential for developing operative transport intervention and urban optimization plans. However, established vehicular route choice models failed to fully consider the bounded behavioral rationality and the complex characteristics of the urban built environment affecting drivers' route…
▽ More
The modeling of disaggregated vehicular mobility and its associations with the ambient urban built environment is essential for developing operative transport intervention and urban optimization plans. However, established vehicular route choice models failed to fully consider the bounded behavioral rationality and the complex characteristics of the urban built environment affecting drivers' route choice preference. Therefore, the spatio-temporal characteristics of vehicular mobility patterns were not fully explained, which limited the granular implementation of relevant transport interventions. To address this limitation, we proposed a vehicular route choice model that mimics the anchoring effect and the exposure preference while driving. The proposed model enables us to quantitatively examine the impact of the built environment on vehicular routing behavior, which has been largely neglected in previous studies. Results show that the proposed model performs 12% better than the conventional vehicular route choice model based on the shortest path principle. Our empirical analysis of taxi drivers' routing behavior patterns in Beijing, China uncovers that drivers are inclined to choose routes with shorter time duration and with less loss at traversal intersections. Counterintuitively, we also found that drivers heavily rely on circuitous ring roads and expressways to deliver passengers, which are unexpectedly longer than the shortest paths. Moreover, characteristics of the urban built environment including road eccentricity, centrality, average road length, land use diversity, sky visibility, and building coverage can affect drivers' route choice behaviors, accounting for about 5% of the increase in the proposed model's performance. We also refine the above explorations according to the modeling results of trips that differ in departure time, travel distance, and occupation status.
△ Less
Submitted 23 April, 2024;
originally announced April 2024.
-
Hysteresis and ribbons in Taylor-Couette flow of a semidilute non-colloidal suspension
Authors:
Changwoo Kang,
Michael F. Schatz,
Parisa Mirbod
Abstract:
In this study, we numerically investigate hysteretic behaviors of secondary bifurcations in the Taylor-Couette flow of a semidilute, neutrally buoyant, and noncolloidal suspension. We consider a suspension with a bulk particle volume fraction of 0.1, a radius ratio of 0.877, and a particle size of 60. The suspension balance model (SBM) is introduced for numerical simulations to model the dynamics…
▽ More
In this study, we numerically investigate hysteretic behaviors of secondary bifurcations in the Taylor-Couette flow of a semidilute, neutrally buoyant, and noncolloidal suspension. We consider a suspension with a bulk particle volume fraction of 0.1, a radius ratio of 0.877, and a particle size of 60. The suspension balance model (SBM) is introduced for numerical simulations to model the dynamics of particles undergoing shear-induced particle migration with rheological constitutive laws. The suspension flow transitions from circular Couette flow (CCF) via ribbons (RIB), spiral vortex flow (SVF), and wavy spiral vortex flow (WSVF) to wavy vortex flow (WVF) with the increase of suspension Reynolds number. The primary transition arises very slowly with an oscillatory critical mode and appears through a supercritical (or non-hysteretic) bifurcation. However, we find hysteretic behaviors in subsequent bifurcations (spiral vortex flow (SVF) to wavy spiral vortex flow (WSVF) and WSVF to wavy vortex flow (WVF)) during increasing-Re and decreasing-Re procedures with a rapid-step change near the transition boundaries. The WSVF and WVF states are more sustained below the transition boundaries when the Reynolds number is rapidly decreased in stages. However, the SVF and WSVF become WSVF and WVF more sharply with increasing Re, respectively. To conclude this study, we also examine in detail, a standing wave of weak counter-rotating vortices that occurs as the primary instability and analyze the wave that oscillates in time but is stationary in space in the RIB state.
△ Less
Submitted 26 January, 2024;
originally announced January 2024.
-
Deep-learning-driven end-to-end metalens imaging
Authors:
Joonhyuk Seo,
Jaegang Jo,
Joohoon Kim,
Joonho Kang,
Chanik Kang,
Seongwon Moon,
Eunji Lee,
Jehyeong Hong,
Junsuk Rho,
Haejun Chung
Abstract:
Recent advances in metasurface lenses (metalenses) have shown great potential for opening a new era in compact imaging, photography, light detection and ranging (LiDAR), and virtual reality/augmented reality (VR/AR) applications. However, the fundamental trade-off between broadband focusing efficiency and operating bandwidth limits the performance of broadband metalenses, resulting in chromatic ab…
▽ More
Recent advances in metasurface lenses (metalenses) have shown great potential for opening a new era in compact imaging, photography, light detection and ranging (LiDAR), and virtual reality/augmented reality (VR/AR) applications. However, the fundamental trade-off between broadband focusing efficiency and operating bandwidth limits the performance of broadband metalenses, resulting in chromatic aberration, angular aberration, and a relatively low efficiency. In this study, a deep-learning-based image restoration framework is proposed to overcome these limitations and realize end-to-end metalens imaging, thereby achieving aberration-free full-color imaging for mass-produced metalenses with 10-mm diameter. Neural-network-assisted metalens imaging achieved a high resolution comparable to that of the ground truth image.
△ Less
Submitted 10 May, 2024; v1 submitted 5 December, 2023;
originally announced December 2023.
-
A3SA: Advanced Data Augmentation via Adjoint Sensitivity Analysis
Authors:
Chanik Kang,
Dongjin Seo,
Svetlana V Boriskina,
Haejun Chung
Abstract:
Innovative machine learning techniques have facilitated the inverse design of photonic structures for numerous practical applications. Nevertheless, within these approaches, the quantity of data and the initial data distribution are paramount for the discovery of highly efficient photonic devices. These devices often require simulated data ranging from thousands to several hundred thousand data po…
▽ More
Innovative machine learning techniques have facilitated the inverse design of photonic structures for numerous practical applications. Nevertheless, within these approaches, the quantity of data and the initial data distribution are paramount for the discovery of highly efficient photonic devices. These devices often require simulated data ranging from thousands to several hundred thousand data points. This issue has consistently posed a major hurdle in machine learning-based photonic design problems. Therefore, we propose a novel data augmentation algorithm grounded in the adjoint method, capable of generating more than 300 times the amount of original data while enhancing device efficiency. The adjoint method forecasts changes in the figure of merit (FoM) resulting from structural perturbations, requiring only two full-wave Maxwell simulations for this prediction. By leveraging the adjoint gradient values, we can augment and label several thousand new data points without any additional computations. Furthermore, the augmented data generated by the proposed algorithm displays significantly improved FoMs owing to the precise FoM change predictions enabled by the adjoint gradients. We apply this algorithm to a multi-layered metalens design problem and demonstrate that it consequently exhibits a 343-fold increase in data generation efficiency. After incorporating the proposed algorithm into a generative adversarial network (GAN), the optimized metalens exhibits a maximum focusing efficiency of 92.93%, comparable to the theoretical upper bound (93.80%).
△ Less
Submitted 6 November, 2023; v1 submitted 30 October, 2023;
originally announced October 2023.
-
Characterizing the temporally stable structure of community evolution in intra-urban origin-destination networks
Authors:
Xiao-Jian Chen,
Yuhui Zhao,
Chaogui Kang,
Xiaoyue Xing,
Quanhua Dong,
Yu Liu
Abstract:
Intra-urban origin-destination (OD) network communities evolve throughout the day, indicating changing groups of closely connected regions. Under this variation, groups of regions with high consistency of community affiliation characterize the temporally stable structure of the evolution process, aiding in comprehending urban dynamics. However, how to quantify this consistency and identify these g…
▽ More
Intra-urban origin-destination (OD) network communities evolve throughout the day, indicating changing groups of closely connected regions. Under this variation, groups of regions with high consistency of community affiliation characterize the temporally stable structure of the evolution process, aiding in comprehending urban dynamics. However, how to quantify this consistency and identify these groups are open questions. In this study, we introduce the consensus OD network to quantify the consistency of community affiliation among regions. Furthermore, the temporally stable community decomposition method is proposed to identify groups of regions with high internal and low external consistency (named "stable groups"), where each group consists of temporally stable cores and attaching peripheries. Wuhan taxi data is used to verify our methods. On the hourly time scale, eleven stable groups containing 82.9% of regions are identified. This high percentage suggests that dynamic communities can be well organized via cores. Moreover, stable groups are spatially closed and more likely to distribute within a single district and separated by water bodies. Cores exhibit higher POI entropy and more healthcare and shopping services than peripheries. Our methods and empirical findings contribute to some practical issues, such as urban area division, polycentric evaluation and construction, and infectious disease control.
△ Less
Submitted 22 September, 2023;
originally announced September 2023.
-
Status and performance of the AMoRE-I experiment on neutrinoless double beta decay
Authors:
H. B. Kim,
D. H. Ha,
E. J. Jeon,
J. A. Jeon,
H. S. Jo,
C. S. Kang,
W. G. Kang,
H. S. Kim,
S. C. Kim,
S. G. Kim,
S. K. Kim,
S. R. Kim,
W. T. Kim,
Y. D. Kim,
Y. H. Kim,
D. H. Kwon,
E. S. Lee,
H. J. Lee,
H. S. Lee,
J. S. Lee,
M. H. Lee,
S. W. Lee,
Y. C. Lee,
D. S. Leonard,
H. S. Lim
, et al. (10 additional authors not shown)
Abstract:
AMoRE is an international project to search for the neutrinoless double beta decay of $^{100}$Mo using a detection technology consisting of magnetic microcalorimeters (MMCs) and molybdenum-based scintillating crystals. Data collection has begun for the current AMORE-I phase of the project, an upgrade from the previous pilot phase. AMoRE-I employs thirteen $^\mathrm{48depl.}$Ca$^{100}$MoO$_4$ cryst…
▽ More
AMoRE is an international project to search for the neutrinoless double beta decay of $^{100}$Mo using a detection technology consisting of magnetic microcalorimeters (MMCs) and molybdenum-based scintillating crystals. Data collection has begun for the current AMORE-I phase of the project, an upgrade from the previous pilot phase. AMoRE-I employs thirteen $^\mathrm{48depl.}$Ca$^{100}$MoO$_4$ crystals and five Li$_2$$^{100}$MoO$_4$ crystals for a total crystal mass of 6.2 kg. Each detector module contains a scintillating crystal with two MMC channels for heat and light detection. We report the present status of the experiment and the performance of the detector modules.
△ Less
Submitted 5 November, 2022;
originally announced November 2022.
-
The A to Z Guide to Accelerating Continuous Improvement with ResFrac
Authors:
Mark McClure,
Garrett Fowler,
Chris Hewson,
Charles Kang
Abstract:
This document is designed to give a new ResFrac user the tools that they need to succeed. It describes what ResFrac does and how to use it. We cover much more than just button pressing. Using ResFrac successfully requires high-level engineering skills: how to design and execute a modeling workflow, how to think critically about problems, and how to communicate the results.
This document is designed to give a new ResFrac user the tools that they need to succeed. It describes what ResFrac does and how to use it. We cover much more than just button pressing. Using ResFrac successfully requires high-level engineering skills: how to design and execute a modeling workflow, how to think critically about problems, and how to communicate the results.
△ Less
Submitted 8 May, 2024; v1 submitted 29 May, 2022;
originally announced May 2022.
-
Description of ResFrac automated history matching and optimization workflow
Authors:
Charles A. Kang,
Mark W. McClure,
Somasekhar Reddy
Abstract:
This document describes the functioning of the automated history matching and optimization workflow implemented with the ResFrac hydraulic fracturing and reservoir simulator. The purpose of the automated history matching and optimization workflow is enable automated calibration of simulator models to observed data and application to forward optimization. The automated workflow works by solving a f…
▽ More
This document describes the functioning of the automated history matching and optimization workflow implemented with the ResFrac hydraulic fracturing and reservoir simulator. The purpose of the automated history matching and optimization workflow is enable automated calibration of simulator models to observed data and application to forward optimization. The automated workflow works by solving a formal mathematical optimization problem to minimize misfit with observations from any point in the lifecycle of a hydraulically fractured reservoir, or to maximize a quantity of interest associated such a reservoir, such as net present value. Objective function evaluations in the optimization problem consist of runs of the ResFrac simulator, which is a physics-based model of hydraulic fracturing and reservoir phenomena. The workflow employs a proxy model to improve computational speed and applies experimental design and Bayesian sampling techniques to generate points with which to train the proxy model. This document also provides an overview of the software infrastructure developed to support the automated workflow.
△ Less
Submitted 25 November, 2021;
originally announced November 2021.
-
Alpha backgrounds in the AMoRE-Pilot experiment
Authors:
V. Alenkov,
H. W. Bae,
J. Beyer,
R. S. Boiko,
K. Boonin,
O. Buzanov,
N. Chanthima,
M. K. Cheoun,
S. H. Choi,
F. A. Danevich,
M. Djamal,
D. Drung,
C. Enss,
A. Fleischmann,
A. Gangapshev,
L. Gastaldo,
Yu. M. Gavriljuk,
A. Gezhaev,
V. D. Grigoryeva,
V. Gurentsov,
D. H. Ha,
C. Ha,
E. J. Ha,
I. Hahn,
E. J. Jeon
, et al. (81 additional authors not shown)
Abstract:
The Advanced Mo-based Rare process Experiment (AMoRE)-Pilot experiment is an initial phase of the AMoRE search for neutrinoless double beta decay of $^{100}$Mo, with the purpose of investigating the level and sources of backgrounds. Searches for neutrinoless double beta decay generally require ultimately low backgrounds. Surface $α$ decays on the crystals themselves or nearby materials can deposit…
▽ More
The Advanced Mo-based Rare process Experiment (AMoRE)-Pilot experiment is an initial phase of the AMoRE search for neutrinoless double beta decay of $^{100}$Mo, with the purpose of investigating the level and sources of backgrounds. Searches for neutrinoless double beta decay generally require ultimately low backgrounds. Surface $α$ decays on the crystals themselves or nearby materials can deposit a continuum of energies that can be as high as the $Q$-value of the decay itself and may fall in the region of interest (ROI). To understand these background events, we studied backgrounds from radioactive contaminations internal to and on the surface of the crystals or nearby materials with Geant4-based Monte Carlo simulations. In this study, we report on the measured $α$ energy spectra fitted with the corresponding simulated spectra for six crystal detectors, where sources of background contributions could be identified through high energy $α$ peaks and continuum parts in the energy spectrum for both internal and surface contaminations. We determine the low-energy contributions from internal and surface $α$ contaminations by extrapolating from the $α$ background fitting model.
△ Less
Submitted 5 December, 2022; v1 submitted 16 July, 2021;
originally announced July 2021.
-
Transportation Interventions Reshaping NYC Commute: the Probabilistic Simulation Framework Assessing the Impacts of Ridesharing and Manhattan Congestion Surcharge
Authors:
Devashish Khulbe,
Chaogui Kang,
Stanislav Sobolevsky
Abstract:
Understanding holistic impact of planned transportation solutions and interventions on urban systems is challenged by their complexity but critical for decision making. The cornerstone for such impact assessments is estimating the transportation mode-shift resulting from the intervention. And while transportation planning has well-established models for the mode-choice assessment such as the neste…
▽ More
Understanding holistic impact of planned transportation solutions and interventions on urban systems is challenged by their complexity but critical for decision making. The cornerstone for such impact assessments is estimating the transportation mode-shift resulting from the intervention. And while transportation planning has well-established models for the mode-choice assessment such as the nested multinomial logit model, an individual choice simulation could be better suited for addressing the mode-shift allowing to consistently account for individual preferences. In addition, no model perfectly represents the reality while the available ground truth data on the actual transportation choices needed to infer the model is often incomplete or inconsistent. The present paper addresses those challenges by offering an individual mode-choice and mode-shift simulation model and the Bayesian inference framework. It accounts for uncertainties in the data as well as the model estimate and translates them into uncertainties of the resulting mode-shift and the impacts. The framework is evaluated on the two intervention cases: introducing ride-sharing for-hire-vehicles in NYC as well the recent introduction of the Manhattan Congestion Surcharge. Being successfully evaluated on the cases above, the framework can be used for assessing mode-shift and resulting economic, social and environmental implications for any future urban transportation solutions and policies being considered by decision-makers or transportation companies.
△ Less
Submitted 13 October, 2020;
originally announced October 2020.
-
Airborne dispersion of droplets during coughing: a physical model of viral transmission
Authors:
Hongying Li,
Fong Yew Leong,
George Xu,
Chang Wei Kang,
Keng Hui Lim,
Ban Hock Tan,
Chian Min Loo
Abstract:
The Covid-19 pandemic has focused attention on airborne transmission of viruses. Using realistic air flow simulation, we model droplet dispersion from coughing and study the transmission risk related to SARS-CoV-2. Although most airborne droplets are 8-16 $μ$m in diameter, the droplets with the highest transmission potential are, in fact, 32-40 $μ$m. Use of face masks is therefore recommended for…
▽ More
The Covid-19 pandemic has focused attention on airborne transmission of viruses. Using realistic air flow simulation, we model droplet dispersion from coughing and study the transmission risk related to SARS-CoV-2. Although most airborne droplets are 8-16 $μ$m in diameter, the droplets with the highest transmission potential are, in fact, 32-40 $μ$m. Use of face masks is therefore recommended for both personal and social protection. We found social distancing effective at reducing transmission potential across all droplet sizes. However, the presence of a human body 1 m away modifies the aerodynamics so that downstream droplet dispersion is enhanced, which has implications on safe distancing in queues. Based on median viral load, we found that an average of 0.55 viral copies is inhaled at 1 m distance per cough. Droplet evaporation results in significant reduction in droplet counts, but airborne transmission remains possible even under low humidity conditions.
△ Less
Submitted 4 August, 2020;
originally announced August 2020.
-
COVID-19 causes record decline in global CO2 emissions
Authors:
Zhu Liu,
Philippe Ciais,
Zhu Deng,
Ruixue Lei,
Steven J. Davis,
Sha Feng,
Bo Zheng,
Duo Cui,
Xinyu Dou,
Pan He,
Biqing Zhu,
Chenxi Lu,
Piyu Ke,
Taochun Sun,
Yuan Wang,
Xu Yue,
Yilong Wang,
Yadong Lei,
Hao Zhou,
Zhaonan Cai,
Yuhui Wu,
Runtao Guo,
Tingxuan Han,
Jinjun Xue,
Olivier Boucher
, et al. (15 additional authors not shown)
Abstract:
The considerable cessation of human activities during the COVID-19 pandemic has affected global energy use and CO2 emissions. Here we show the unprecedented decrease in global fossil CO2 emissions from January to April 2020 was of 7.8% (938 Mt CO2 with a +6.8% of 2-σ uncertainty) when compared with the period last year. In addition other emerging estimates of COVID impacts based on monthly energy…
▽ More
The considerable cessation of human activities during the COVID-19 pandemic has affected global energy use and CO2 emissions. Here we show the unprecedented decrease in global fossil CO2 emissions from January to April 2020 was of 7.8% (938 Mt CO2 with a +6.8% of 2-σ uncertainty) when compared with the period last year. In addition other emerging estimates of COVID impacts based on monthly energy supply or estimated parameters, this study contributes to another step that constructed the near-real-time daily CO2 emission inventories based on activity from power generation (for 29 countries), industry (for 73 countries), road transportation (for 406 cities), aviation and maritime transportation and commercial and residential sectors emissions (for 206 countries). The estimates distinguished the decline of CO2 due to COVID-19 from the daily, weekly and seasonal variations as well as the holiday events. The COVID-related decreases in CO2 emissions in road transportation (340.4 Mt CO2, -15.5%), power (292.5 Mt CO2, -6.4% compared to 2019), industry (136.2 Mt CO2, -4.4%), aviation (92.8 Mt CO2, -28.9%), residential (43.4 Mt CO2, -2.7%), and international shipping (35.9Mt CO2, -15%). Regionally, decreases in China were the largest and earliest (234.5 Mt CO2,-6.9%), followed by Europe (EU-27 & UK) (138.3 Mt CO2, -12.0%) and the U.S. (162.4 Mt CO2, -9.5%). The declines of CO2 are consistent with regional nitrogen oxides concentrations observed by satellites and ground-based networks, but the calculated signal of emissions decreases (about 1Gt CO2) will have little impacts (less than 0.13ppm by April 30, 2020) on the overserved global CO2 concertation. However, with observed fast CO2 recovery in China and partial re-opening globally, our findings suggest the longer-term effects on CO2 emissions are unknown and should be carefully monitored using multiple measures.
△ Less
Submitted 14 June, 2020; v1 submitted 28 April, 2020;
originally announced April 2020.
-
Generation of 0.7 mJ multicycle 15 THz radiation by phase-matched optical rectification in lithium niobate
Authors:
Dogeun Jang,
Jae Hee Sung,
Seong Ku Lee,
Chul Kang,
Ki-Yong Kim
Abstract:
We demonstrate efficient multicycle terahertz pulse generation at 14.6 THz from large-area lithium niobate crystals by using high-energy (up to 2 J) femtosecond Ti:sapphire laser pulses. Such terahertz radiation is produced by phase-matched optical rectification in lithium niobate. Experimentally, we achieve maximal terahertz energy of 0.71 mJ with conversion efficiency of $\sim$0.04%. We also fin…
▽ More
We demonstrate efficient multicycle terahertz pulse generation at 14.6 THz from large-area lithium niobate crystals by using high-energy (up to 2 J) femtosecond Ti:sapphire laser pulses. Such terahertz radiation is produced by phase-matched optical rectification in lithium niobate. Experimentally, we achieve maximal terahertz energy of 0.71 mJ with conversion efficiency of $\sim$0.04%. We also find that the effective interaction length for optimal terahertz conversion is fundamentally limited by terahertz absorption, laser pulse stretching by material dispersion, and terahertz-induced nonlinear cascading effects on the driving laser pulse.
△ Less
Submitted 25 March, 2020;
originally announced March 2020.
-
Scalable terahertz generation by large-area optical rectification at 80 TW laser power
Authors:
Dogeun Jang,
Chul Kang,
Seong Ku Lee,
Jae Hee Sung,
Chul-sik Kee,
Ki-yong Kim
Abstract:
We demonstrate high-energy terahertz generation from a large-aperture (75 mm diameter) lithium niobate wafer by using a femtosecond laser with energy up to 2 J. This scheme utilizes optical rectification in a bulk lithium niobate crystal, where most terahertz energy is emitted from a thin layer of the rear surface. Despite its simple setup, this scheme can yield 0.19 mJ of terahertz energy with la…
▽ More
We demonstrate high-energy terahertz generation from a large-aperture (75 mm diameter) lithium niobate wafer by using a femtosecond laser with energy up to 2 J. This scheme utilizes optical rectification in a bulk lithium niobate crystal, where most terahertz energy is emitted from a thin layer of the rear surface. Despite its simple setup, this scheme can yield 0.19 mJ of terahertz energy with laser-to-terahertz conversion efficiencies of ~0.01%, about 3 times better than ZnTe when pumped at 800 nm. The experimental setup is up-scalable for multi-mJ terahertz generation with petawatt laser pumping.
△ Less
Submitted 17 July, 2019;
originally announced July 2019.
-
First Results from the AMoRE-Pilot neutrinoless double beta decay experiment
Authors:
V. Alenkov,
H. W. Bae,
J. Beyer,
R. S. Boiko,
K. Boonin,
O. Buzanov,
N. Chanthima,
M. K. Cheoun,
D. M. Chernyak,
J. S. Choe,
S. Choi,
F. A. Danevich,
M. Djamal,
D. Drung,
C. Enss,
A. Fleischmann,
A. M. Gangapshev,
L. Gastaldo,
Yu. M. Gavriljuk,
A. M. Gezhaev,
V. D. Grigoryeva,
V. I. Gurentsov,
O. Gylova,
C. Ha,
D. H. Ha
, et al. (84 additional authors not shown)
Abstract:
The Advanced Molybdenum-based Rare process Experiment (AMoRE) aims to search for neutrinoless double beta decay (0$νββ$) of $^{100}$Mo with $\sim$100 kg of $^{100}$Mo-enriched molybdenum embedded in cryogenic detectors with a dual heat and light readout. At the current, pilot stage of the AMoRE project we employ six calcium molybdate crystals with a total mass of 1.9 kg, produced from $^{48}$Ca-de…
▽ More
The Advanced Molybdenum-based Rare process Experiment (AMoRE) aims to search for neutrinoless double beta decay (0$νββ$) of $^{100}$Mo with $\sim$100 kg of $^{100}$Mo-enriched molybdenum embedded in cryogenic detectors with a dual heat and light readout. At the current, pilot stage of the AMoRE project we employ six calcium molybdate crystals with a total mass of 1.9 kg, produced from $^{48}$Ca-depleted calcium and $^{100}$Mo-enriched molybdenum ($^{48\textrm{depl}}$Ca$^{100}$MoO$_4$). The simultaneous detection of heat(phonon) and scintillation (photon) signals is realized with high resolution metallic magnetic calorimeter sensors that operate at milli-Kelvin temperatures. This stage of the project is carried out in the Yangyang underground laboratory at a depth of 700 m. We report first results from the AMoRE-Pilot $0νββ$ search with a 111 kg$\cdot$d live exposure of $^{48\textrm{depl}}$Ca$^{100}$MoO$_4$ crystals. No evidence for $0νββ$ decay of $^{100}$Mo is found, and a upper limit is set for the half-life of 0$νββ$ of $^{100}$Mo of $T^{0ν}_{1/2} > 9.5\times10^{22}$ y at 90% C.L.. This limit corresponds to an effective Majorana neutrino mass limit in the range $\langle m_{ββ}\rangle\le(1.2-2.1)$ eV.
△ Less
Submitted 7 May, 2019; v1 submitted 22 March, 2019;
originally announced March 2019.
-
ResFrac Technical Writeup
Authors:
Mark McClure,
Charles Kang,
Soma Medam,
Chris Hewson,
Egor Dontsov,
Ankush Singh,
Carlo Peruzzo,
Elizaveta Gordeliy
Abstract:
ResFrac is a combined hydraulic fracturing, reservoir, and hydraulic fracturing simulator. It describes multiphase fluid flow (black oil or compositional), proppant transport, transport of non-Newtonian fluid additives, and thermal transport. It also includes stress shadowing from fracture propagation and porothermoelastic responses from pressure change in the matrix. It uses constitutive equation…
▽ More
ResFrac is a combined hydraulic fracturing, reservoir, and hydraulic fracturing simulator. It describes multiphase fluid flow (black oil or compositional), proppant transport, transport of non-Newtonian fluid additives, and thermal transport. It also includes stress shadowing from fracture propagation and porothermoelastic responses from pressure change in the matrix. It uses constitutive equations that smoothly transition between equations for flow through an open crack to flow through a closed crack (with or without proppant). This document provides a detailed technical description of the code, along with validation simulations to confirm numerical accuracy.
△ Less
Submitted 22 April, 2024; v1 submitted 5 April, 2018;
originally announced April 2018.
-
Phase-matching of multiple-cavity detectors for dark matter axion search
Authors:
Junu Jeong,
SungWoo Youn,
Saebyeok Ahn,
Chanshin Kang,
Yannis K. Semertzids
Abstract:
Conventional axion dark matter search experiments employ cylindrical microwave cavities immersed in a solenoidal magnetic field. Exploring higher frequency regions requires smaller size cavities as the TM010 resonant frequencies scale inversely with cavity radius. One intuitive way to make efficient use of a given magnet volume, and thereby to increase the experimental sensitivity, is to bundle mu…
▽ More
Conventional axion dark matter search experiments employ cylindrical microwave cavities immersed in a solenoidal magnetic field. Exploring higher frequency regions requires smaller size cavities as the TM010 resonant frequencies scale inversely with cavity radius. One intuitive way to make efficient use of a given magnet volume, and thereby to increase the experimental sensitivity, is to bundle multiple cavities together and combine their individual outputs ensuring phase-matching of the coherent axion signal. We perform an extensive study for realistic design of a phase-matching mechanism for multiple-cavity systems and demonstrate its experimental feasibility using a double-cavity system.
△ Less
Submitted 18 July, 2017;
originally announced July 2017.
-
A CaMoO4 Crystal Low Temperature Detector for the AMoRE Neutrinoless Double Beta Decay Search
Authors:
G. B. Kim,
S. Choi,
F. A. Danevich,
A. Fleischmann,
C. S. Kang,
H. J. Kim,
S. R. Kim,
Y. D. Kim,
Y. H. Kim,
V. A. Kornoukhov,
H. J. Lee,
J. H. Lee,
M. K. Lee,
S. J. Lee,
J. H. So,
W. S. Yoon
Abstract:
We report the development of a CaMoO4 crystal low temperature detector for the AMoRE neutrinoless double beta decay (0ν\b{eta}\b{eta}) search experiment. The prototype detector cell was composed of a 216 g CaMoO4 crystal and a metallic magnetic calorimeter. An over-ground measurement demonstrated FWHM resolution of 6-11 keV for full absorption gamma peaks. Pulse shape discrimination was clearly de…
▽ More
We report the development of a CaMoO4 crystal low temperature detector for the AMoRE neutrinoless double beta decay (0ν\b{eta}\b{eta}) search experiment. The prototype detector cell was composed of a 216 g CaMoO4 crystal and a metallic magnetic calorimeter. An over-ground measurement demonstrated FWHM resolution of 6-11 keV for full absorption gamma peaks. Pulse shape discrimination was clearly demonstrated in the phonon signals, and 7.6 σ of discrimination power was found for the α and \b{eta}/γ separation. The phonon signals showed rise-times of about 1 ms. It is expected that the relatively fast rise-time will increase the rejection efficiency of two-neutrino double beta decay pile-up events which can be one of the major background sources in 0ν\b{eta}\b{eta} searches.
△ Less
Submitted 24 February, 2016;
originally announced February 2016.
-
Technical Design Report for the AMoRE $0νββ$ Decay Search Experiment
Authors:
V. Alenkov,
P. Aryal,
J. Beyer,
R. S. Boiko,
K. Boonin,
O. Buzanov,
N. Chanthima,
M. K. Cheoun D. M. Chernyak,
J. Choi,
S. Choi,
F. A. Danevich,
M. Djamal,
D. Drung,
C. Enss,
A. Fleischmann,
A. M. Gangapshev,
L. Gastaldo,
Yu. M. Gavriljuk,
A. M. Gezhaev,
V. I. Gurentsov,
D. H Ha,
I. S. Hahn,
J. H. Jang,
E. J. Jeon,
H. S. Jo
, et al. (65 additional authors not shown)
Abstract:
The AMoRE (Advanced Mo-based Rare process Experiment) project is a series of experiments that use advanced cryogenic techniques to search for the neutrinoless double-beta decay of \mohundred. The work is being carried out by an international collaboration of researchers from eight countries. These searches involve high precision measurements of radiation-induced temperature changes and scintillati…
▽ More
The AMoRE (Advanced Mo-based Rare process Experiment) project is a series of experiments that use advanced cryogenic techniques to search for the neutrinoless double-beta decay of \mohundred. The work is being carried out by an international collaboration of researchers from eight countries. These searches involve high precision measurements of radiation-induced temperature changes and scintillation light produced in ultra-pure \Mo[100]-enriched and \Ca[48]-depleted calcium molybdate ($\mathrm{^{48depl}Ca^{100}MoO_4}$) crystals that are located in a deep underground laboratory in Korea. The \mohundred nuclide was chosen for this \zeronubb decay search because of its high $Q$-value and favorable nuclear matrix element. Tests have demonstrated that \camo crystals produce the brightest scintillation light among all of the molybdate crystals, both at room and at cryogenic temperatures. $\mathrm{^{48depl}Ca^{100}MoO_4}$ crystals are being operated at milli-Kelvin temperatures and read out via specially developed metallic-magnetic-calorimeter (MMC) temperature sensors that have excellent energy resolution and relatively fast response times. The excellent energy resolution provides good discrimination of signal from backgrounds, and the fast response time is important for minimizing the irreducible background caused by random coincidence of two-neutrino double-beta decay events of \mohundred nuclei. Comparisons of the scintillating-light and phonon yields and pulse shape discrimination of the phonon signals will be used to provide redundant rejection of alpha-ray-induced backgrounds. An effective Majorana neutrino mass sensitivity that reaches the expected range of the inverted neutrino mass hierarchy, i.e., 20-50 meV, could be achieved with a 200~kg array of $\mathrm{^{48depl}Ca^{100}MoO_4}$ crystals operating for three years.
△ Less
Submitted 18 December, 2015;
originally announced December 2015.
-
Delineating Intra-Urban Spatial Connectivity Patterns by Travel-Activities: A Case Study of Beijing, China
Authors:
Chaogui Kang,
Yu Liu,
Lun Wu
Abstract:
Travel activities have been widely applied to quantify spatial interactions between places, regions and nations. In this paper, we model the spatial connectivities between 652 Traffic Analysis Zones (TAZs) in Beijing by a taxi OD dataset. First, we unveil the gravitational structure of intra-urban spatial connectivities of Beijing. On overall, the inter-TAZ interactions are well governed by the Gr…
▽ More
Travel activities have been widely applied to quantify spatial interactions between places, regions and nations. In this paper, we model the spatial connectivities between 652 Traffic Analysis Zones (TAZs) in Beijing by a taxi OD dataset. First, we unveil the gravitational structure of intra-urban spatial connectivities of Beijing. On overall, the inter-TAZ interactions are well governed by the Gravity Model $G_{ij} = λp_{i}p_{j}/d_{ij}$, where $p_{i}$, $p_{j}$ are degrees of TAZ $i$, $j$ and $d_{ij}$ the distance between them, with a goodness-of-fit around 0.8. Second, the network based analysis well reveals the polycentric form of Beijing. Last, we detect the semantics of inter-TAZ connectivities based on their spatiotemporal patterns. We further find that inter-TAZ connections deviating from the Gravity Model can be well explained by link semantics.
△ Less
Submitted 15 July, 2014;
originally announced July 2014.
-
The Impact of Social Segregation on Human Mobility in Developing and Urbanized Regions
Authors:
Alexander Amini,
Kevin Kung,
Chaogui Kang,
Stanislav Sobolevsky,
Carlo Ratti
Abstract:
This study leverages mobile phone data to analyze human mobility patterns in developing countries, especially in comparison to more industrialized countries. Developing regions, such as the Ivory Coast, are marked by a number of factors that may influence mobility, such as less infrastructural coverage and maturity, less economic resources and stability, and in some cases, more cultural and langua…
▽ More
This study leverages mobile phone data to analyze human mobility patterns in developing countries, especially in comparison to more industrialized countries. Developing regions, such as the Ivory Coast, are marked by a number of factors that may influence mobility, such as less infrastructural coverage and maturity, less economic resources and stability, and in some cases, more cultural and language-based diversity. By comparing mobile phone data collected from the Ivory Coast to similar data collected in Portugal, we are able to highlight both qualitative and quantitative differences in mobility patterns - such as differences in likelihood to travel, as well as in the time required to travel - that are relevant to consideration on policy, infrastructure, and economic development. Our study illustrates how cultural and linguistic diversity in developing regions (such as Ivory Coast) can present challenges to mobility models that perform well and were conceptualized in less culturally diverse regions. Finally, we address these challenges by proposing novel techniques to assess the strength of borders in a regional partitioning scheme and to quantify the impact of border strength on mobility model accuracy.
△ Less
Submitted 22 January, 2014;
originally announced January 2014.
-
Uncovering patterns of inter-urban trip and spatial interaction from social media check-in data
Authors:
Yu Liu,
Zhengwei Sui,
Chaogui Kang,
Yong Gao
Abstract:
The article revisits spatial interaction and distance decay from the perspective of human mobility patterns and spatially-embedded networks based on an empirical data set. We extract nationwide inter-urban movements in China from a check-in data set that covers half million individuals and 370 cities to analyze the underlying patterns of trips and spatial interactions. By fitting the gravity model…
▽ More
The article revisits spatial interaction and distance decay from the perspective of human mobility patterns and spatially-embedded networks based on an empirical data set. We extract nationwide inter-urban movements in China from a check-in data set that covers half million individuals and 370 cities to analyze the underlying patterns of trips and spatial interactions. By fitting the gravity model, we find that the observed spatial interactions are governed by a power law distance decay effect. The obtained gravity model also well reproduces the exponential trip displacement distribution. However, due to the ecological fallacy issue, the movement of an individual may not obey the same distance decay effect. We also construct a spatial network where the edge weights denote the interaction strengths. The communities detected from the network are spatially connected and roughly consistent with province boundaries. We attribute this pattern to different distance decay parameters between intra-province and inter-province trips.
△ Less
Submitted 17 November, 2013; v1 submitted 1 October, 2013;
originally announced October 2013.
-
Takagi-Taupin Description of X-ray Dynamical Diffraction from Diffractive Optics with Large Numerical Aperture
Authors:
Hanfei Yan,
Jorg Maser,
Albert Macrander,
Qun Shen,
Stefan Vogt,
Brian Stephenson,
Hyon Chol Kang
Abstract:
We present a formalism of x-ray dynamical diffraction from volume diffractive optics with large numerical aperture and high aspect ratio, in an analogy to the Takagi-Taupin equations for strained single crystals. We derive a set of basic equations for dynamical diffraction from volume diffractive optics, which enable us to study the focusing property of these optics with various grating profiles…
▽ More
We present a formalism of x-ray dynamical diffraction from volume diffractive optics with large numerical aperture and high aspect ratio, in an analogy to the Takagi-Taupin equations for strained single crystals. We derive a set of basic equations for dynamical diffraction from volume diffractive optics, which enable us to study the focusing property of these optics with various grating profiles. We study volume diffractive optics that satisfy the Bragg condition to various degrees, namely flat, tilted and wedged geometries, and derive the curved geometries required for ultimate focusing. We show that the curved geometries satisfy the Bragg condition everywhere and phase requirement for point focusing, and effectively focus hard x-rays to a scale close to the wavelength.
△ Less
Submitted 30 April, 2007;
originally announced April 2007.
-
Mapping of periodically poled crystals via spontaneous parametric down-conversion
Authors:
G. Kh. Kitaeva,
V. V. Tishkova,
I. I. Naumova,
A. N. Penin,
C. H. Kang,
S. H. Tang
Abstract:
A new method for characterization of periodically poled crystals is developed based on spontaneous parametric down-conversion. The method is demonstrated on crystals of Y:LiNbO3, Mg:Y:LiNbO3 with non-uniform periodically poled structures, obtained directly under Czochralski growth procedure and designed for application of OPO in the mid infrared range. Infrared dispersion of refractive index, ef…
▽ More
A new method for characterization of periodically poled crystals is developed based on spontaneous parametric down-conversion. The method is demonstrated on crystals of Y:LiNbO3, Mg:Y:LiNbO3 with non-uniform periodically poled structures, obtained directly under Czochralski growth procedure and designed for application of OPO in the mid infrared range. Infrared dispersion of refractive index, effective working periods and wavelengths of OPO were determined by special treatment of frequency-angular spectra of spontaneous parametric down-conversion in the visible range. Two-dimensional mapping via spontaneous parametric down-conversion is proposed for characterizing spatial distribution of bulk quasi-phase matching efficiency across the input window of a periodically poled sample.
△ Less
Submitted 31 May, 2005;
originally announced May 2005.