-
Projected background and sensitivity of AMoRE-II
Authors:
A. Agrawal,
V. V. Alenkov,
P. Aryal,
J. Beyer,
B. Bhandari,
R. S. Boiko,
K. Boonin,
O. Buzanov,
C. R. Byeon,
N. Chanthima,
M. K. Cheoun,
J. S. Choe,
Seonho Choi,
S. Choudhury,
J. S. Chung,
F. A. Danevich,
M. Djamal,
D. Drung,
C. Enss,
A. Fleischmann,
A. M. Gangapshev,
L. Gastaldo,
Y. M. Gavrilyuk,
A. M. Gezhaev,
O. Gileva
, et al. (81 additional authors not shown)
Abstract:
AMoRE-II aims to search for neutrinoless double beta decay with an array of 423 Li$_2$$^{100}$MoO$_4$ crystals operating in the cryogenic system as the main phase of the Advanced Molybdenum-based Rare process Experiment (AMoRE). AMoRE has been planned to operate in three phases: AMoRE-pilot, AMoRE-I, and AMoRE-II. AMoRE-II is currently being installed at the Yemi Underground Laboratory, located ap…
▽ More
AMoRE-II aims to search for neutrinoless double beta decay with an array of 423 Li$_2$$^{100}$MoO$_4$ crystals operating in the cryogenic system as the main phase of the Advanced Molybdenum-based Rare process Experiment (AMoRE). AMoRE has been planned to operate in three phases: AMoRE-pilot, AMoRE-I, and AMoRE-II. AMoRE-II is currently being installed at the Yemi Underground Laboratory, located approximately 1000 meters deep in Jeongseon, Korea. The goal of AMoRE-II is to reach up to $T^{0νββ}_{1/2}$ $\sim$ 6 $\times$ 10$^{26}$ years, corresponding to an effective Majorana mass of 15 - 29 meV, covering all the inverted mass hierarchy regions. To achieve this, the background level of the experimental configurations and possible background sources of gamma and beta events should be well understood. We have intensively performed Monte Carlo simulations using the GEANT4 toolkit in all the experimental configurations with potential sources. We report the estimated background level that meets the 10$^{-4}$counts/(keV$\cdot$kg$\cdot$yr) requirement for AMoRE-II in the region of interest (ROI) and show the projected half-life sensitivity based on the simulation study.
△ Less
Submitted 13 June, 2024;
originally announced June 2024.
-
Comparing discriminating abilities of evaluation metrics in link prediction
Authors:
Xinshan Jiao,
Shuyan Wan,
Qian Liu,
Yilin Bi,
Yan-Li Lee,
En Xu,
Dong Hao,
Tao Zhou
Abstract:
Link prediction aims to predict the potential existence of links between two unconnected nodes within a network based on the known topological characteristics. Evaluation metrics are used to assess the effectiveness of algorithms in link prediction. The discriminating ability of these evaluation metrics is vitally important for accurately evaluating link prediction algorithms. In this study, we pr…
▽ More
Link prediction aims to predict the potential existence of links between two unconnected nodes within a network based on the known topological characteristics. Evaluation metrics are used to assess the effectiveness of algorithms in link prediction. The discriminating ability of these evaluation metrics is vitally important for accurately evaluating link prediction algorithms. In this study, we propose an artificial network model, based on which one can adjust a single parameter to monotonically and continuously turn the prediction accuracy of the specifically designed link prediction algorithm. Building upon this foundation, we show a framework to depict the effectiveness of evaluating metrics by focusing on their discriminating ability. Specifically, a quantitative comparison in the abilities of correctly discerning varying prediction accuracies was conducted encompassing nine evaluation metrics: Precision, Recall, F1-Measure, Matthews Correlation Coefficient (MCC), Balanced Precision (BP), the Area Under the receiver operating characteristic Curve (AUC), the Area Under the Precision-Recall curve (AUPR), Normalized Discounted Cumulative Gain (NDCG), and the Area Under the magnified ROC (AUC-mROC). The results indicate that the discriminating abilities of the three metrics, AUC, AUPR, and NDCG, are significantly higher than those of other metrics.
△ Less
Submitted 8 January, 2024;
originally announced January 2024.
-
Status and performance of the AMoRE-I experiment on neutrinoless double beta decay
Authors:
H. B. Kim,
D. H. Ha,
E. J. Jeon,
J. A. Jeon,
H. S. Jo,
C. S. Kang,
W. G. Kang,
H. S. Kim,
S. C. Kim,
S. G. Kim,
S. K. Kim,
S. R. Kim,
W. T. Kim,
Y. D. Kim,
Y. H. Kim,
D. H. Kwon,
E. S. Lee,
H. J. Lee,
H. S. Lee,
J. S. Lee,
M. H. Lee,
S. W. Lee,
Y. C. Lee,
D. S. Leonard,
H. S. Lim
, et al. (10 additional authors not shown)
Abstract:
AMoRE is an international project to search for the neutrinoless double beta decay of $^{100}$Mo using a detection technology consisting of magnetic microcalorimeters (MMCs) and molybdenum-based scintillating crystals. Data collection has begun for the current AMORE-I phase of the project, an upgrade from the previous pilot phase. AMoRE-I employs thirteen $^\mathrm{48depl.}$Ca$^{100}$MoO$_4$ cryst…
▽ More
AMoRE is an international project to search for the neutrinoless double beta decay of $^{100}$Mo using a detection technology consisting of magnetic microcalorimeters (MMCs) and molybdenum-based scintillating crystals. Data collection has begun for the current AMORE-I phase of the project, an upgrade from the previous pilot phase. AMoRE-I employs thirteen $^\mathrm{48depl.}$Ca$^{100}$MoO$_4$ crystals and five Li$_2$$^{100}$MoO$_4$ crystals for a total crystal mass of 6.2 kg. Each detector module contains a scintillating crystal with two MMC channels for heat and light detection. We report the present status of the experiment and the performance of the detector modules.
△ Less
Submitted 5 November, 2022;
originally announced November 2022.
-
Imaging Atomic-Scale Chemistry from Fused Multi-Modal Electron Microscopy
Authors:
Jonathan Schwartz,
Zichao Wendy Di,
Yi Jiang,
Alyssa J. Fielitz,
Don-Hyung Ha,
Sanjaya D. Perera,
Ismail El Baggari,
Richard D. Robinson,
Jeffrey A. Fessler,
Colin Ophus,
Steve Rozeveld,
Robert Hovden
Abstract:
Efforts to map atomic-scale chemistry at low doses with minimal noise using electron microscopes are fundamentally limited by inelastic interactions. Here, fused multi-modal electron microscopy offers high signal-to-noise ratio (SNR) recovery of material chemistry at nano- and atomic- resolution by coupling correlated information encoded within both elastic scattering (high-angle annular dark fiel…
▽ More
Efforts to map atomic-scale chemistry at low doses with minimal noise using electron microscopes are fundamentally limited by inelastic interactions. Here, fused multi-modal electron microscopy offers high signal-to-noise ratio (SNR) recovery of material chemistry at nano- and atomic- resolution by coupling correlated information encoded within both elastic scattering (high-angle annular dark field (HAADF)) and inelastic spectroscopic signals (electron energy loss (EELS) or energy-dispersive x-ray (EDX)). By linking these simultaneously acquired signals, or modalities, the chemical distribution within nanomaterials can be imaged at significantly lower doses with existing detector hardware. In many cases, the dose requirements can be reduced by over one order of magnitude. This high SNR recovery of chemistry is tested against simulated and experimental atomic resolution data of heterogeneous nanomaterials.
△ Less
Submitted 5 November, 2023; v1 submitted 3 March, 2022;
originally announced March 2022.
-
Alpha backgrounds in the AMoRE-Pilot experiment
Authors:
V. Alenkov,
H. W. Bae,
J. Beyer,
R. S. Boiko,
K. Boonin,
O. Buzanov,
N. Chanthima,
M. K. Cheoun,
S. H. Choi,
F. A. Danevich,
M. Djamal,
D. Drung,
C. Enss,
A. Fleischmann,
A. Gangapshev,
L. Gastaldo,
Yu. M. Gavriljuk,
A. Gezhaev,
V. D. Grigoryeva,
V. Gurentsov,
D. H. Ha,
C. Ha,
E. J. Ha,
I. Hahn,
E. J. Jeon
, et al. (81 additional authors not shown)
Abstract:
The Advanced Mo-based Rare process Experiment (AMoRE)-Pilot experiment is an initial phase of the AMoRE search for neutrinoless double beta decay of $^{100}$Mo, with the purpose of investigating the level and sources of backgrounds. Searches for neutrinoless double beta decay generally require ultimately low backgrounds. Surface $α$ decays on the crystals themselves or nearby materials can deposit…
▽ More
The Advanced Mo-based Rare process Experiment (AMoRE)-Pilot experiment is an initial phase of the AMoRE search for neutrinoless double beta decay of $^{100}$Mo, with the purpose of investigating the level and sources of backgrounds. Searches for neutrinoless double beta decay generally require ultimately low backgrounds. Surface $α$ decays on the crystals themselves or nearby materials can deposit a continuum of energies that can be as high as the $Q$-value of the decay itself and may fall in the region of interest (ROI). To understand these background events, we studied backgrounds from radioactive contaminations internal to and on the surface of the crystals or nearby materials with Geant4-based Monte Carlo simulations. In this study, we report on the measured $α$ energy spectra fitted with the corresponding simulated spectra for six crystal detectors, where sources of background contributions could be identified through high energy $α$ peaks and continuum parts in the energy spectrum for both internal and surface contaminations. We determine the low-energy contributions from internal and surface $α$ contaminations by extrapolating from the $α$ background fitting model.
△ Less
Submitted 5 December, 2022; v1 submitted 16 July, 2021;
originally announced July 2021.
-
Sequential vessel segmentation via deep channel attention network
Authors:
Dongdong Hao,
Song Ding,
Linwei Qiu,
Yisong Lv,
Baowei Fei,
Yueqi Zhu,
Binjie Qin
Abstract:
This paper develops a novel encoder-decoder deep network architecture which exploits the several contextual frames of 2D+t sequential images in a sliding window centered at current frame to segment 2D vessel masks from the current frame. The architecture is equipped with temporal-spatial feature extraction in encoder stage, feature fusion in skip connection layers and channel attention mechanism i…
▽ More
This paper develops a novel encoder-decoder deep network architecture which exploits the several contextual frames of 2D+t sequential images in a sliding window centered at current frame to segment 2D vessel masks from the current frame. The architecture is equipped with temporal-spatial feature extraction in encoder stage, feature fusion in skip connection layers and channel attention mechanism in decoder stage. In the encoder stage, a series of 3D convolutional layers are employed to hierarchically extract temporal-spatial features. Skip connection layers subsequently fuse the temporal-spatial feature maps and deliver them to the corresponding decoder stages. To efficiently discriminate vessel features from the complex and noisy backgrounds in the XCA images, the decoder stage effectively utilizes channel attention blocks to refine the intermediate feature maps from skip connection layers for subsequently decoding the refined features in 2D ways to produce the segmented vessel masks. Furthermore, Dice loss function is implemented to train the proposed deep network in order to tackle the class imbalance problem in the XCA data due to the wide distribution of complex background artifacts. Extensive experiments by comparing our method with other state-of-the-art algorithms demonstrate the proposed method's superior performance over other methods in terms of the quantitative metrics and visual validation. The source codes are at https://github.com/Binjie-Qin/SVS-net
△ Less
Submitted 9 February, 2021;
originally announced February 2021.
-
First Results from the AMoRE-Pilot neutrinoless double beta decay experiment
Authors:
V. Alenkov,
H. W. Bae,
J. Beyer,
R. S. Boiko,
K. Boonin,
O. Buzanov,
N. Chanthima,
M. K. Cheoun,
D. M. Chernyak,
J. S. Choe,
S. Choi,
F. A. Danevich,
M. Djamal,
D. Drung,
C. Enss,
A. Fleischmann,
A. M. Gangapshev,
L. Gastaldo,
Yu. M. Gavriljuk,
A. M. Gezhaev,
V. D. Grigoryeva,
V. I. Gurentsov,
O. Gylova,
C. Ha,
D. H. Ha
, et al. (84 additional authors not shown)
Abstract:
The Advanced Molybdenum-based Rare process Experiment (AMoRE) aims to search for neutrinoless double beta decay (0$νββ$) of $^{100}$Mo with $\sim$100 kg of $^{100}$Mo-enriched molybdenum embedded in cryogenic detectors with a dual heat and light readout. At the current, pilot stage of the AMoRE project we employ six calcium molybdate crystals with a total mass of 1.9 kg, produced from $^{48}$Ca-de…
▽ More
The Advanced Molybdenum-based Rare process Experiment (AMoRE) aims to search for neutrinoless double beta decay (0$νββ$) of $^{100}$Mo with $\sim$100 kg of $^{100}$Mo-enriched molybdenum embedded in cryogenic detectors with a dual heat and light readout. At the current, pilot stage of the AMoRE project we employ six calcium molybdate crystals with a total mass of 1.9 kg, produced from $^{48}$Ca-depleted calcium and $^{100}$Mo-enriched molybdenum ($^{48\textrm{depl}}$Ca$^{100}$MoO$_4$). The simultaneous detection of heat(phonon) and scintillation (photon) signals is realized with high resolution metallic magnetic calorimeter sensors that operate at milli-Kelvin temperatures. This stage of the project is carried out in the Yangyang underground laboratory at a depth of 700 m. We report first results from the AMoRE-Pilot $0νββ$ search with a 111 kg$\cdot$d live exposure of $^{48\textrm{depl}}$Ca$^{100}$MoO$_4$ crystals. No evidence for $0νββ$ decay of $^{100}$Mo is found, and a upper limit is set for the half-life of 0$νββ$ of $^{100}$Mo of $T^{0ν}_{1/2} > 9.5\times10^{22}$ y at 90% C.L.. This limit corresponds to an effective Majorana neutrino mass limit in the range $\langle m_{ββ}\rangle\le(1.2-2.1)$ eV.
△ Less
Submitted 7 May, 2019; v1 submitted 22 March, 2019;
originally announced March 2019.
-
Link prediction via linear optimization
Authors:
Ratha Pech,
Dong Hao,
Yan-Li Lee,
Ye Yuan,
Tao Zhou
Abstract:
Link prediction is an elemental challenge in network science, which has already found applications in guiding laboratorial experiments, digging out drug targets, recommending friends in social networks, probing mechanisms in network evolution, and so on. With a simple assumption that the likelihood of the existence of a link between two nodes can be unfolded by a linear summation of neighboring no…
▽ More
Link prediction is an elemental challenge in network science, which has already found applications in guiding laboratorial experiments, digging out drug targets, recommending friends in social networks, probing mechanisms in network evolution, and so on. With a simple assumption that the likelihood of the existence of a link between two nodes can be unfolded by a linear summation of neighboring nodes' contributions, we obtain the analytical solution of the optimal likelihood matrix, which shows remarkably better performance in predicting missing links than the state-of-the-art algorithms for not only simple networks, but also weighted and directed networks. To our surprise, even some degenerated local similarity indices from the solution outperform well-known local indices, which largely refines our knowledge, for example, the direct count of the number of 3-hop paths between two nodes more accurately predicts missing links than the number of 2-hop paths (i.e., the number of common neighbors), while in the previous studies, as indicated by the local path index and Katz index, the statistics on longer paths are always considered to be complementary to but less important than those on shorter paths.
△ Less
Submitted 29 April, 2018; v1 submitted 31 March, 2018;
originally announced April 2018.
-
A generalized method toward drug-target interaction prediction via low-rank matrix projection
Authors:
Ratha Pech,
Dong Hao,
Yan-Li Lee,
Maryna Po,
Tao Zhou
Abstract:
Drug-target interaction (DTI) prediction plays a very important role in drug development and drug discovery. Biochemical experiments or \textit{in vitro} methods are very expensive, laborious and time-consuming. Therefore, \textit{in silico} approaches including docking simulation and machine learning have been proposed to solve this problem. In particular, machine learning approaches have attract…
▽ More
Drug-target interaction (DTI) prediction plays a very important role in drug development and drug discovery. Biochemical experiments or \textit{in vitro} methods are very expensive, laborious and time-consuming. Therefore, \textit{in silico} approaches including docking simulation and machine learning have been proposed to solve this problem. In particular, machine learning approaches have attracted increasing attentions recently. However, in addition to the known drug-target interactions, most of the machine learning methods require extra characteristic information such as chemical structures, genome sequences, binding types and so on. Whenever such information is not available, they may perform poor. Very recently, the similarity-based link prediction methods were extended to bipartite networks, which can be applied to solve the DTI prediction problem by using topological information only. In this work, we propose a method based on low-rank matrix projection to solve the DTI prediction problem. On one hand, when there is no extra characteristic information of drugs or targets, the proposed method utilizes only the known interactions. On the other hand, the proposed method can also utilize the extra characteristic information when it is available and the performances will be remarkably improved. Moreover, the proposed method can predict the interactions associated with new drugs or targets of which we know nothing about their associated interactions, but only some characteristic information. We compare the proposed method with ten baseline methods, e.g., six similarity-based methods that utilize only the known interactions and four methods that utilize the extra characteristic information. The datasets and codes implementing the simulations are available at https://github.com/rathapech/DTI_LMP.
△ Less
Submitted 2 May, 2018; v1 submitted 6 June, 2017;
originally announced June 2017.
-
Link Prediction via Matrix Completion
Authors:
Ratha Pech,
Dong Hao,
Liming Pan,
Hong Cheng,
Tao Zhou
Abstract:
Inspired by practical importance of social networks, economic networks, biological networks and so on, studies on large and complex networks have attracted a surge of attentions in the recent years. Link prediction is a fundamental issue to understand the mechanisms by which new links are added to the networks. We introduce the method of robust principal component analysis (robust PCA) into link p…
▽ More
Inspired by practical importance of social networks, economic networks, biological networks and so on, studies on large and complex networks have attracted a surge of attentions in the recent years. Link prediction is a fundamental issue to understand the mechanisms by which new links are added to the networks. We introduce the method of robust principal component analysis (robust PCA) into link prediction, and estimate the missing entries of the adjacency matrix. On one hand, our algorithm is based on the sparsity and low rank property of the matrix, on the other hand, it also performs very well when the network is dense. This is because a relatively dense real network is also sparse in comparison to the complete graph. According to extensive experiments on real networks from disparate fields, when the target network is connected and sufficiently dense, whatever it is weighted or unweighted, our method is demonstrated to be very effective and with prediction accuracy being considerably improved comparing with many state-of-the-art algorithms.
△ Less
Submitted 22 June, 2016; v1 submitted 21 June, 2016;
originally announced June 2016.
-
Nanomaterial datasets to advance tomography in scanning transmission electron microscopy
Authors:
Barnaby D. A. Levin,
Elliot Padgett,
Chien-Chun Chen,
M. C. Scott,
Rui Xu,
Wolfgang Theis,
Yi Jiang,
Yongsoo Yang,
Colin Ophus,
Haitao Zhang,
Don-Hyung Ha,
Deli Wang,
Yingchao Yu,
Hector D. Abruna,
Richard D. Robinson,
Peter Ercius,
Lena F. Kourkoutis,
Jianwei Miao,
David A. Muller,
Robert Hovden
Abstract:
Electron tomography in materials science has flourished with the demand to characterize nanoscale materials in three dimensions (3D). Access to experimental data is vital for developing and validating reconstruction methods that improve resolution and reduce radiation dose requirements. This work presents five high-quality scanning transmission electron microscope (STEM) tomography datasets in ord…
▽ More
Electron tomography in materials science has flourished with the demand to characterize nanoscale materials in three dimensions (3D). Access to experimental data is vital for developing and validating reconstruction methods that improve resolution and reduce radiation dose requirements. This work presents five high-quality scanning transmission electron microscope (STEM) tomography datasets in order to address the critical need for open access data in this field. The datasets represent the current limits of experimental technique, are of high quality, and contain materials with structural complexity. Included are tomographic series of a hyperbranched Co2P nanocrystal, platinum nanoparticles on a carbon nanofibre imaged over the complete 180° tilt range, a platinum nanoparticle and a tungsten needle both imaged at atomic resolution by equal slope tomography, and a through-focal tilt series of PtCu nanoparticles. A volumetric reconstruction from every dataset is provided for comparison and development of post-processing and visualization techniques. Researchers interested in creating novel data processing and reconstruction algorithms will now have access to state of the art experimental test data.
△ Less
Submitted 9 June, 2016;
originally announced June 2016.
-
Simulations of background sources in AMoRE-I experiment
Authors:
A. Luqman,
D. H. Ha,
J. J. Lee,
E. J. Jeon,
H. S. Jo,
H. J. Kim,
Y. D. Kim,
Y. H. Kim,
V. V. Kobychev,
H. S. Lee,
H. K. Park,
K. Siyeon,
J. H. So,
V. I. Tretyak,
Y. S. Yoon
Abstract:
The first phase of the Advanced Mo-based Rare Process Experiment (AMoRE-I), an experimental search for neutrinoless double beta decay (0$νββ$) of $^{100}$Mo in calcium molybdate (CMO) crystal using cryogenic techniques, is in preparation at the YangYang underground laboratory (Y2L) in South Korea. A GEANT4 based Monte Carlo simulation was performed for background estimation in the first-phase the…
▽ More
The first phase of the Advanced Mo-based Rare Process Experiment (AMoRE-I), an experimental search for neutrinoless double beta decay (0$νββ$) of $^{100}$Mo in calcium molybdate (CMO) crystal using cryogenic techniques, is in preparation at the YangYang underground laboratory (Y2L) in South Korea. A GEANT4 based Monte Carlo simulation was performed for background estimation in the first-phase the AMoRE-I detector and shield configuration. Background sources such as $^{238}$U, $^{232}$Th, $^{40}$K, $^{235}$U, and $^{210}$Pb were simulated from inside the crystals, surrounding materials, outer shielding walls of the Y2L cavity. The estimated background rate in the region of interest was found to be $< 1.5 \times 10^{-3}$ counts/keV/kg/yr (ckky). The effects of random coincidences between background and two-neutrino double beta decay of $^{100}$Mo were estimated as a potential background source and its estimated rate was $< 2.3 \times 10^{-4}$ ckky.
△ Less
Submitted 6 July, 2016; v1 submitted 6 January, 2016;
originally announced January 2016.
-
Technical Design Report for the AMoRE $0νββ$ Decay Search Experiment
Authors:
V. Alenkov,
P. Aryal,
J. Beyer,
R. S. Boiko,
K. Boonin,
O. Buzanov,
N. Chanthima,
M. K. Cheoun D. M. Chernyak,
J. Choi,
S. Choi,
F. A. Danevich,
M. Djamal,
D. Drung,
C. Enss,
A. Fleischmann,
A. M. Gangapshev,
L. Gastaldo,
Yu. M. Gavriljuk,
A. M. Gezhaev,
V. I. Gurentsov,
D. H Ha,
I. S. Hahn,
J. H. Jang,
E. J. Jeon,
H. S. Jo
, et al. (65 additional authors not shown)
Abstract:
The AMoRE (Advanced Mo-based Rare process Experiment) project is a series of experiments that use advanced cryogenic techniques to search for the neutrinoless double-beta decay of \mohundred. The work is being carried out by an international collaboration of researchers from eight countries. These searches involve high precision measurements of radiation-induced temperature changes and scintillati…
▽ More
The AMoRE (Advanced Mo-based Rare process Experiment) project is a series of experiments that use advanced cryogenic techniques to search for the neutrinoless double-beta decay of \mohundred. The work is being carried out by an international collaboration of researchers from eight countries. These searches involve high precision measurements of radiation-induced temperature changes and scintillation light produced in ultra-pure \Mo[100]-enriched and \Ca[48]-depleted calcium molybdate ($\mathrm{^{48depl}Ca^{100}MoO_4}$) crystals that are located in a deep underground laboratory in Korea. The \mohundred nuclide was chosen for this \zeronubb decay search because of its high $Q$-value and favorable nuclear matrix element. Tests have demonstrated that \camo crystals produce the brightest scintillation light among all of the molybdate crystals, both at room and at cryogenic temperatures. $\mathrm{^{48depl}Ca^{100}MoO_4}$ crystals are being operated at milli-Kelvin temperatures and read out via specially developed metallic-magnetic-calorimeter (MMC) temperature sensors that have excellent energy resolution and relatively fast response times. The excellent energy resolution provides good discrimination of signal from backgrounds, and the fast response time is important for minimizing the irreducible background caused by random coincidence of two-neutrino double-beta decay events of \mohundred nuclei. Comparisons of the scintillating-light and phonon yields and pulse shape discrimination of the phonon signals will be used to provide redundant rejection of alpha-ray-induced backgrounds. An effective Majorana neutrino mass sensitivity that reaches the expected range of the inverted neutrino mass hierarchy, i.e., 20-50 meV, could be achieved with a 200~kg array of $\mathrm{^{48depl}Ca^{100}MoO_4}$ crystals operating for three years.
△ Less
Submitted 18 December, 2015;
originally announced December 2015.
-
Birefringence of Muscovite Mica Plate Temperature Effect in the Ultraviolet and Visible Spectrum
Authors:
Xu Zhang,
Fuquan Wu,
Limei Qi,
Xia Zhang,
Dianzhong Hao
Abstract:
We developed a method to measure the phase retardation and birefringence of muscovite mica plate in the temperature range of 223K to 358K within the spectrum of 300 to 700 nm. The phase retardation data is gained through the standard transmission ellipsometry using spectroscopic ellipsometer. With the phase retardation and thickness of the mica plate we can calculate its birefringence dispersion.…
▽ More
We developed a method to measure the phase retardation and birefringence of muscovite mica plate in the temperature range of 223K to 358K within the spectrum of 300 to 700 nm. The phase retardation data is gained through the standard transmission ellipsometry using spectroscopic ellipsometer. With the phase retardation and thickness of the mica plate we can calculate its birefringence dispersion. Our results give abundant phase retardation and birefringence data of muscovite mica in the ultraviolet and visible spectrum from 223K to 358K. From the experimental data, the phase retardation and birefringence will drop down at the fixed wavelength when the temperature rises. The accuracy of the birefringence of mica plate is better than 3.5e-5.
△ Less
Submitted 15 December, 2014;
originally announced December 2014.
-
Phase Retardation and Birefringence of the Crystalline Quartz Plate in the Ultraviolet and Visible Spectrum
Authors:
Xu Zhang,
Fuquan Wu,
Limei Qi,
Xia Zhang,
Dianzhong Hao
Abstract:
A method for measuring the phase retardation and birefringence of crystalline quartz wave plate in the ultraviolet and visible spectrum is demonstrated using spectroscopic ellipsometer. After the calibration of the crystalline quartz plate, the experimental data are collected by the photodetector and sent to the computer. According to the outputted data, the retardation can be obtained in the rang…
▽ More
A method for measuring the phase retardation and birefringence of crystalline quartz wave plate in the ultraviolet and visible spectrum is demonstrated using spectroscopic ellipsometer. After the calibration of the crystalline quartz plate, the experimental data are collected by the photodetector and sent to the computer. According to the outputted data, the retardation can be obtained in the range of 190 to 770 nm. With the retardation data, the birefringence for the quartz can be calculated in the same spectrum with an accuracy of better than . The birefringence results enrich the crystalline quartz birefringence data especially in the ultraviolet spectrum.
△ Less
Submitted 11 November, 2014;
originally announced November 2014.
-
Extortion under Uncertainty: Zero-Determinant Strategies in Noisy Games
Authors:
Dong Hao,
Zhihai Rong,
Tao Zhou
Abstract:
Repeated game theory has been one of the most prevailing tools for understanding the long-run relationships, which are footstones in building human society. Recent works have revealed a new set of "zero-determinant (ZD)" strategies, which is an important advance in repeated games. A ZD strategy player can exert a unilaterally control on two players' payoffs. In particular he can deterministically…
▽ More
Repeated game theory has been one of the most prevailing tools for understanding the long-run relationships, which are footstones in building human society. Recent works have revealed a new set of "zero-determinant (ZD)" strategies, which is an important advance in repeated games. A ZD strategy player can exert a unilaterally control on two players' payoffs. In particular he can deterministically set the opponent's payoff, or enforce an unfair linear relationship between the players' payoffs, thereby always seizing an advantageous share of payoffs. One of the limitations of the original ZD strategy, however, is that it does not capture the notion of robustness when the game is subjected to stochastic errors. In this paper, we propose a general model of ZD strategies for noisy repeated games, and find that ZD strategies have high robustness against errors. We further derive the pinning strategy under noise, by which the ZD strategy player coercively set the opponent's expected payoff to his desired level, although his payoff control ability declines with the increase of noise strength. Due to the uncertainty caused by noise, the ZD strategy player cannot secure his payoff to be higher than the opponent's, which implies strong extortions do not exist even under low noise. While we show that the ZD strategy player can still establish a novel kind of extortions, named weak extortions, where any increase of his own payoff always exceeds that of the opponent's by a fixed percentage, and the conditions under which the weak extortions can be realized are more stringent as the noise becomes stronger.
△ Less
Submitted 12 May, 2015; v1 submitted 22 August, 2014;
originally announced August 2014.
-
Zero-Determinant Strategies in the Iterated Public Goods Game
Authors:
Liming Pan,
Dong Hao,
Zhihai Rong,
Tao Zhou
Abstract:
Recently, Press and Dyson have proposed a new class of probabilistic and conditional strategies for the two-player iterated Prisoner's Dilemma, so-called zero-determinant strategies. A player adopting zero-determinant strategies is able to pin the expected payoff of the opponents or to enforce a linear relationship between his own payoff and the opponents' payoff, in a unilateral way. This paper c…
▽ More
Recently, Press and Dyson have proposed a new class of probabilistic and conditional strategies for the two-player iterated Prisoner's Dilemma, so-called zero-determinant strategies. A player adopting zero-determinant strategies is able to pin the expected payoff of the opponents or to enforce a linear relationship between his own payoff and the opponents' payoff, in a unilateral way. This paper considers zero-determinant strategies in the iterated public goods game, a representative multi-player evolutionary game where in each round each player will choose whether or not put his tokens into a public pot, and the tokens in this pot are multiplied by a factor larger than one and then evenly divided among all players. The analytical and numerical results exhibit a similar yet different scenario to the case of two-player games: (i) with small number of players or a small multiplication factor, a player is able to unilaterally pin the expected total payoff of all other players; (ii) a player is able to set the ratio between his payoff and the total payoff of all other players, but this ratio is limited by an upper bound if the multiplication factor exceeds a threshold that depends on the number of players.
△ Less
Submitted 14 February, 2014;
originally announced February 2014.