-
Measuring the CMB spectral distortions with COSMO: the multi-mode antenna system
Authors:
E. Manzan,
L. Albano,
C. Franceschet,
E. S. Battistelli,
P. de Bernardis,
M. Bersanelli,
F. Cacciotti,
A. Capponi,
F. Columbro,
G. Conenna,
G. Coppi,
A. Coppolecchia,
G. D'Alessandro,
G. De Gasperis,
M. De Petris,
M. Gervasi,
G. Isopi,
L. Lamagna,
A. Limonta,
E. Marchitelli,
S. Masi,
A. Mennella,
F. Montonati,
F. Nati,
A. Occhiuzzi
, et al. (7 additional authors not shown)
Abstract:
In this work, we present the design and manufacturing of the two multi-mode antenna arrays of the COSMO experiment and the preliminary beam pattern measurements of their fundamental mode compared with simulations.
COSMO is a cryogenic Martin-Puplett Fourier Transform Spectrometer that aims at measuring the isotropic y-type spectral distortion of the Cosmic Microwave Background from Antarctica, b…
▽ More
In this work, we present the design and manufacturing of the two multi-mode antenna arrays of the COSMO experiment and the preliminary beam pattern measurements of their fundamental mode compared with simulations.
COSMO is a cryogenic Martin-Puplett Fourier Transform Spectrometer that aims at measuring the isotropic y-type spectral distortion of the Cosmic Microwave Background from Antarctica, by performing differential measurements between the sky and an internal, cryogenic reference blackbody. To reduce the atmospheric contribution, a spinning wedge mirror performs fast sky-dips at varying elevations while fast, low-noise Kinetic Inductance detectors scan the interferogram.
Two arrays of antennas couple the radiation to the detectors. Each array consists of nine smooth-walled multi-mode feed-horns, operating in the $120-180$ GHz and $210-300$ GHz range, respectively. The multi-mode propagation helps increase the instrumental sensitivity without employing large focal planes with hundreds of detectors. The two arrays have a step-linear and a linear profile, respectively, and are obtained by superimposing aluminum plates made with CNC milling. The simulated multi-mode beam pattern has a $\sim 20^{\circ} - 26^{\circ}$ FWHM for the low-frequency array and $\sim 16^{\circ}$ FWHM for the high-frequency one. The side lobes are below $-15$ dB.
To characterize the antenna response, we measured the beam pattern of the fundamental mode using a Vector Network Analyzer, in far-field conditions inside an anechoic chamber at room temperature. We completed the measurements of the low-frequency array and found a good agreement with the simulations. We also identified a few non-idealities that we attribute to the measuring setup and will further investigate. A comprehensive multi-mode measurement will be feasible at cryogenic temperature once the full receiver is integrated.
△ Less
Submitted 13 June, 2024;
originally announced June 2024.
-
A catalogue of observed geo-effective CME/ICME characteristics
Authors:
R. Mugatwala,
S. Chierichini,
G. Francisco,
G. Napoletano,
R. Foldes,
L. Giovannelli,
G. De Gasperis,
E. Camporeale,
R. Erdélyi,
D. Del Moro
Abstract:
One of the goals of Space Weather studies is to achieve a better understanding of impulsive phenomena, such as Coronal Mass Ejections (CMEs), in order to improve our ability to forecast them and mitigate the risk to our technologically driven society. The essential part of achieving this goal is to assess the performance of forecasting models. To this end, the quality and availability of suitable…
▽ More
One of the goals of Space Weather studies is to achieve a better understanding of impulsive phenomena, such as Coronal Mass Ejections (CMEs), in order to improve our ability to forecast them and mitigate the risk to our technologically driven society. The essential part of achieving this goal is to assess the performance of forecasting models. To this end, the quality and availability of suitable data are of paramount importance. In this work, we have merged already publicly available data of CMEs from both in-situ and remote instrumentation in order to build a database of CME properties. To evaluate the accuracy of such a database and confirm the relationship between in-situ and remote observations, we have employed the drag-based model (DBM) due to its simplicity and inexpensive cost of computational resources. In this study, we have also explored the parameter space for the drag parameter and solar wind speed using a Monte Carlo approach to evaluate how well the DBM determines the propagation of CMEs for the events in the dataset. The dataset of geoeffective CMEs constructed as a result of this work provides validation of the initial hypothesis about DBM, and solar wind speed and also yields further insight into CME features like arrival time, arrival speed, lift-off time, etc. Using a data-driven approach, this procedure allows us to present a homogeneous, reliable, and robust dataset for the investigation of CME propagation. On the other hand, possible CME events are identified where DBM approximation is not valid due to model limitations and higher uncertainties in the input parameters, those events require more thorough investigation.
△ Less
Submitted 22 November, 2023;
originally announced November 2023.
-
Measuring the CMB primordial B-modes with Bolometric Interferometry
Authors:
A. Mennella,
P. Ade,
A. Almela,
G. Amico,
L. H. Arnaldi,
J. Aumont,
S. Banfi,
E. S. Battistelli,
B. Bélier,
L. Bergé,
J. -Ph. Bernard,
P. de Bernardis,
M. Bersanelli,
J. Bonaparte,
J. D. Bonilla,
E. Bunn,
D. Buzi,
F. Cacciotti,
D. Camilieri,
F. Cavaliere,
P. Chanial,
C. Chapron,
L. Colombo,
F. Columbro,
A. Coppolecchia
, et al. (89 additional authors not shown)
Abstract:
The Q&U Bolometric Interferometer for Cosmology (QUBIC) is the first bolometric interferometer designed to measure the primordial B-mode polarization of the Cosmic Microwave Background (CMB). Bolometric interferometry is a novel technique that combines the sensitivity of bolometric detectors with the control of systematic effects that is typical of interferometry, both key features in the quest fo…
▽ More
The Q&U Bolometric Interferometer for Cosmology (QUBIC) is the first bolometric interferometer designed to measure the primordial B-mode polarization of the Cosmic Microwave Background (CMB). Bolometric interferometry is a novel technique that combines the sensitivity of bolometric detectors with the control of systematic effects that is typical of interferometry, both key features in the quest for the faint signal of the primordial B-modes. A unique feature is the so-called "spectral imaging", i.e., the ability to recover the sky signal in several sub-bands within the physical band during data analysis. This feature provides an in-band spectral resolution of Δν/ν \sim 0.04 that is unattainable by a traditional imager. This is a key tool for controlling the Galactic foregrounds contamination. In this paper, we describe the principles of bolometric interferometry, the current status of the QUBIC experiment and future prospects.
△ Less
Submitted 5 November, 2023;
originally announced November 2023.
-
CAESAR: Space Weather archive prototype for ASPIS
Authors:
Marco Molinaro,
Valerio Formato,
Carmelo Magnafico,
Federico Benvenuto,
Alessandro Perfetti,
Rossana De Marco,
Cristina Campi,
Andrea Tacchino,
Valeria di Felice,
Ermanno Pietropaolo,
Giancarlo de Gasperis,
Luca di Fino,
Gregoire Francisco,
Igor Bertello,
Anna Milillo,
Giuseppe Sindoni,
Christina Plainaki,
Marco Giardino,
Gianluca Polenta,
Dario Del Moro,
Monica Laurenza
Abstract:
The project CAESAR (Comprehensive spAce wEather Studies for the ASPIS prototype Realization) is aimed to tackle all the relevant aspects of Space Weather (SWE) and realize the prototype of the scientific data centre for Space Weather of the Italian Space Agency (ASI) called ASPIS (ASI SPace Weather InfraStructure). This contribution is meant to bring attention upon the first steps in the developme…
▽ More
The project CAESAR (Comprehensive spAce wEather Studies for the ASPIS prototype Realization) is aimed to tackle all the relevant aspects of Space Weather (SWE) and realize the prototype of the scientific data centre for Space Weather of the Italian Space Agency (ASI) called ASPIS (ASI SPace Weather InfraStructure). This contribution is meant to bring attention upon the first steps in the development of the CAESAR prototype for ASPIS and will focus on the activities of the Node 2000 of CAESAR, the set of Work Packages dedicated to the technical design and implementation of the CAESAR ASPIS archive prototype. The product specifications of the intended resources that will form the archive, functional and system requirements gathered as first steps to seed the design of the prototype infrastructure, and evaluation of existing frameworks, tools and standards, will be presented as well as the status of the project in its initial stage.
△ Less
Submitted 25 October, 2023;
originally announced October 2023.
-
Status of QUBIC, the Q&U Bolometer for Cosmology
Authors:
L. Mousset,
P. Ade,
A. Almela,
G. Amico,
L. H. Arnaldi,
J. Aumont,
S. Banfi,
E. S. Battistelli,
B. Bélier,
L. Bergé,
J. -Ph. Bernard,
P. de Bernardis,
M. Bersanelli,
J. Bonaparte,
J. D. Bonilla,
E. Bunn,
D. Buzi,
D. Camilieri,
F. Cavaliere,
P. Chanial,
C. Chapron,
S. Colombo,
F. Columbro,
A. Coppolecchia,
B. Costanza
, et al. (86 additional authors not shown)
Abstract:
The Q&U Bolometric Interferometer for Cosmology (QUBIC) is a novel kind of polarimeter optimized for the measurement of the B-mode polarization of the Cosmic Microwave Back-ground (CMB), which is one of the major challenges of observational cosmology. The signal is expected to be of the order of a few tens of nK, prone to instrumental systematic effects and polluted by various astrophysical foregr…
▽ More
The Q&U Bolometric Interferometer for Cosmology (QUBIC) is a novel kind of polarimeter optimized for the measurement of the B-mode polarization of the Cosmic Microwave Back-ground (CMB), which is one of the major challenges of observational cosmology. The signal is expected to be of the order of a few tens of nK, prone to instrumental systematic effects and polluted by various astrophysical foregrounds which can only be controlled through multichroic observations. QUBIC is designed to address these observational issues with a novel approach that combines the advantages of interferometry in terms of control of instrumental systematics with those of bolometric detectors in terms of wide-band, background-limited sensitivity.
△ Less
Submitted 6 October, 2022;
originally announced October 2022.
-
Performance of the polarization leakage correction in the PILOT data
Authors:
J-Ph. Bernard,
A. Bernard,
H. Roussel,
I. Choubani,
D. Alina,
J. Aumont,
A. Hughes,
I. Ristorcelli,
S. Stever,
T. Matsumura S. Sugiyama,
K. Komatsu,
G. de Gasperis,
K. Ferriere,
V. Guillet,
N. Ysard,
P. Ade,
P. de Bernardis,
N. Bray,
B. Crane,
J. P. Dubois,
M. Griffin,
P. Hargrave,
Y. Longval,
S. Louvel,
B. Maffei
, et al. (11 additional authors not shown)
Abstract:
The Polarized Instrument for Long-wavelength Observation of the Tenuous interstellar medium (PILOT) is a balloon-borne experiment that aims to measure the polarized emission of thermal dust at a wavelength of 240 um (1.2 THz). The PILOT experiment flew from Timmins, Ontario, Canada in 2015 and 2019 and from Alice Springs, Australia in April 2017. The in-flight performance of the instrument during…
▽ More
The Polarized Instrument for Long-wavelength Observation of the Tenuous interstellar medium (PILOT) is a balloon-borne experiment that aims to measure the polarized emission of thermal dust at a wavelength of 240 um (1.2 THz). The PILOT experiment flew from Timmins, Ontario, Canada in 2015 and 2019 and from Alice Springs, Australia in April 2017. The in-flight performance of the instrument during the second flight was described in Mangilli et al. 2019. In this paper, we present data processing steps that were not presented in Mangilli et al. 2019 and that we have recently implemented to correct for several remaining instrumental effects. The additional data processing concerns corrections related to detector cross-talk and readout circuit memory effects, and leakage from total intensity to polarization. We illustrate the above effects and the performance of our corrections using data obtained during the third flight of PILOT, but the methods used to assess the impact of these effects on the final science-ready data, and our strategies for correcting them will be applied to all PILOT data. We show that the above corrections, and in particular that for the intensity to polarization leakage, which is most critical for accurate polarization measurements with PILOT, are accurate to better than 0.4 % as measured on Jupiter during flight#3.
△ Less
Submitted 7 May, 2022;
originally announced May 2022.
-
Parameter Distributions for the Drag-Based Modeling of CME Propagation
Authors:
Gianluca Napoletano,
Raffaello Foldes,
Enrico Camporeale,
Giancarlo de Gasperis,
Luca Giovannelli,
Evangelos Paouris,
Ermanno Pietropaolo,
Jannis Teunissen,
Ajay Kumar Tiwari,
Dario Del Moro
Abstract:
In recent years, ensemble modeling has been widely employed in space weather to estimate uncertainties in forecasts. We here focus on the ensemble modeling of CME arrival times and arrival velocities using a drag-based model, which is well-suited for this purpose due to its simplicity and low computational cost. Although ensemble techniques have previously been applied to the drag-based model, it…
▽ More
In recent years, ensemble modeling has been widely employed in space weather to estimate uncertainties in forecasts. We here focus on the ensemble modeling of CME arrival times and arrival velocities using a drag-based model, which is well-suited for this purpose due to its simplicity and low computational cost. Although ensemble techniques have previously been applied to the drag-based model, it is still not clear how to best determine distributions for its input parameters, namely the drag parameter and the solar wind speed. The aim of this work is to evaluate statistical distributions for these model parameters starting from a list of past CME-ICME events. We employ LASCO coronagraph observations to measure initial CME position and speed, and in situ data to associate them with an arrival date and arrival speed. For each event we ran a statistical procedure to invert the model equations, producing parameters distributions as output. Our results indicate that the distributions employed in previous works were appropriately selected, even though they were based on restricted samples and heuristic considerations. On the other hand, possible refinements to the current method are also identified, such as the dependence of the drag parameter distribution on the CME being accelerated or decelerated by the solar wind, which deserve further investigation.
△ Less
Submitted 28 January, 2022;
originally announced January 2022.
-
The BINGO Project II: Instrument Description
Authors:
Carlos A. Wuensche,
Thyrso Villela,
Elcio Abdalla,
Vincenzo Liccardo,
Frederico Vieira,
Ian Browne,
Michael W. Peel,
Christopher Radcliffe,
Filipe B. Abdalla,
Alessandro Marins,
Luciano Barosi,
Francisco A. Brito,
Amilcar R. Queiroz,
Bin Wang,
Andre A. Costa,
Elisa G. M. Ferreira,
Karin S. F. Fornazier,
Ricardo G. Landim,
Camila P. Novaes,
Larissa Santos,
Marcelo V. dos Santos,
Jiajun Zhang,
Tianyue Chen,
Jacques Delabrouille,
Clive Dickinson
, et al. (19 additional authors not shown)
Abstract:
The measurement of diffuse 21-cm radiation from the hyperfine transition of neutral hydrogen (HI signal) in different redshifts is an important tool for modern cosmology. However, detecting this faint signal with non-cryogenic receivers in single-dish telescopes is a challenging task. The BINGO (Baryon Acoustic Oscillations from Integrated Neutral Gas Observations) radio telescope is an instrument…
▽ More
The measurement of diffuse 21-cm radiation from the hyperfine transition of neutral hydrogen (HI signal) in different redshifts is an important tool for modern cosmology. However, detecting this faint signal with non-cryogenic receivers in single-dish telescopes is a challenging task. The BINGO (Baryon Acoustic Oscillations from Integrated Neutral Gas Observations) radio telescope is an instrument designed to detect baryonic acoustic oscillations (BAOs) in the cosmological HI signal, in the redshift interval $0.127 \le z \le 0.449$. This paper describes the BINGO radio telescope, including the current status of the optics, receiver, observational strategy, calibration, and the site. BINGO has been carefully designed to minimize systematics, being a transit instrument with no moving dishes and 28 horns operating in the frequency range $980 \le ν\le 1260$ MHz. Comprehensive laboratory tests were conducted for many of the BINGO subsystems and the prototypes of the receiver chain, horn, polarizer, magic tees, and transitions have been successfully tested between 2018 - 2020. The survey was designed to cover $\sim 13\%$ of the sky, with the primary mirror pointing at declination $δ=-15^{\circ}$. The telescope will see an instantaneous declination strip of $14.75^{\circ}$. The results of the prototype tests closely meet those obtained during the modeling process, suggesting BINGO will perform according to our expectations. After one year of observations with a $60\%$ duty cycle and 28 horns, BINGO should achieve an expected sensitivity of 102 $μK$ per 9.33 MHz frequency channel, one polarization, and be able to measure the HI power spectrum in a competitive time frame.
△ Less
Submitted 13 December, 2021; v1 submitted 4 July, 2021;
originally announced July 2021.
-
Baryon Acoustic Oscillations from Integrated Neutral Gas Observations: an instrument to observe the 21cm hydrogen line in the redshift range 0.13 $<$ z $<$ 0.45 -- status update
Authors:
Carlos A. Wuensche,
Elcio Abdalla,
Filipe Batoni Abdalla,
Luciano Barosi,
Bin Wang,
Rui An,
João Alberto de Moraes Barreto,
Richard Battye,
Franciso A. Brito,
Ian Browne,
Daniel Souza Correia,
André Alencar Costa,
Jacques Delabrouille,
Clive Dickinson,
Chang Feng,
Elisa Ferreira,
Karin Fornazier,
Giancarlo de Gasperis,
Priscila Gutierrez,
Stuart Harper,
Ricardo G. Landim,
Vincenzo Liccardo,
Yin-Zhe Ma,
Telmo Machado,
Bruno Maffei
, et al. (26 additional authors not shown)
Abstract:
BINGO (BAO from Integrated Neutral Gas Observations) is a unique radio telescope designed to map the intensity of neutral hydrogen distribution at cosmological distances, making the first detection of Baryon Acoustic Oscillations (BAO) in the frequency band 980 MHz - 1260 MHz, corresponding to a redshift range $0.127 < z < 0.449$. BAO is one of the most powerful probes of cosmological parameters a…
▽ More
BINGO (BAO from Integrated Neutral Gas Observations) is a unique radio telescope designed to map the intensity of neutral hydrogen distribution at cosmological distances, making the first detection of Baryon Acoustic Oscillations (BAO) in the frequency band 980 MHz - 1260 MHz, corresponding to a redshift range $0.127 < z < 0.449$. BAO is one of the most powerful probes of cosmological parameters and BINGO was designed to detect the BAO signal to a level that makes it possible to put new constraints on the equation of state of dark energy. The telescope will be built in Paraíba, Brazil and consists of two $\thicksim$ 40m mirrors, a feedhorn array of 28 horns, and no moving parts, working as a drift-scan instrument. It will cover a $15^{\circ}$ declination strip centered at $\sim δ=-15^{\circ}$, mapping $\sim 5400$ square degrees in the sky. The BINGO consortium is led by University of São Paulo with co-leadership at National Institute for Space Research and Campina Grande Federal University (Brazil). Telescope subsystems have already been fabricated and tested, and the dish and structure fabrication are expected to start in late 2020, as well as the road and terrain preparation.
△ Less
Submitted 3 June, 2021;
originally announced June 2021.
-
QUBIC IV: Performance of TES Bolometers and Readout Electronics
Authors:
M. Piat,
G. Stankowiak,
E. S. Battistelli,
P. de Bernardis,
G. D Alessandro,
M. De Petris,
L. Grandsire,
J. -Ch. Hamilton,
T. D. Hoang,
S. Marnieros,
S. Masi,
A. Mennella,
L. Mousset,
C. O Sullivan,
D. Prele,
A. Tartari,
J. -P. Thermeau,
S. A. Torchinsky,
F. Voisin,
M. Zannoni,
P. Ade,
J. G. Alberro,
A. Almela,
G. Amico,
L. H. Arnaldi
, et al. (104 additional authors not shown)
Abstract:
A prototype version of the Q & U bolometric interferometer for cosmology (QUBIC) underwent a campaign of testing in the laboratory at Astroparticle Physics and Cosmology laboratory in Paris (APC). The detection chain is currently made of 256 NbSi transition edge sensors (TES) cooled to 320 mK. The readout system is a 128:1 time domain multiplexing scheme based on 128 SQUIDs cooled at 1 K that are…
▽ More
A prototype version of the Q & U bolometric interferometer for cosmology (QUBIC) underwent a campaign of testing in the laboratory at Astroparticle Physics and Cosmology laboratory in Paris (APC). The detection chain is currently made of 256 NbSi transition edge sensors (TES) cooled to 320 mK. The readout system is a 128:1 time domain multiplexing scheme based on 128 SQUIDs cooled at 1 K that are controlled and amplified by an SiGe application specific integrated circuit at 40 K. We report the performance of this readout chain and the characterization of the TES. The readout system has been functionally tested and characterized in the lab and in QUBIC. The low noise amplifier demonstrated a white noise level of 0.3 nV.Hz^-0.5. Characterizations of the QUBIC detectors and readout electronics includes the measurement of I-V curves, time constant and the noise equivalent power. The QUBIC TES bolometer array has approximately 80% detectors within operational parameters. It demonstrated a thermal decoupling compatible with a phonon noise of about 5.10^-17 W.Hz^-0.5 at 410 mK critical temperature. While still limited by microphonics from the pulse tubes and noise aliasing from readout system, the instrument noise equivalent power is about 2.10^-16 W.Hz^-0.5, enough for the demonstration of bolometric interferometry.
△ Less
Submitted 20 October, 2021; v1 submitted 17 January, 2021;
originally announced January 2021.
-
QUBIC I: Overview and ScienceProgram
Authors:
J. -Ch. Hamilton,
L. Mousset,
E. S. Battistelli,
M. -A. Bigot-Sazy,
P. Chanial,
R. Charlassier,
G. D'Alessandro,
P. de Bernardis,
M. De Petris,
M. M. Gamboa Lerena,
L. Grandsire,
S. Lau,
S. Marnieros,
S. Masi,
A. Mennella,
C. O'Sullivan,
M. Piat,
G. Riccardi,
C. Scóccola,
M. Stolpovskiy,
A. Tartari,
S. A. Torchinsky,
F. Voisin,
M. Zannoni,
P. Ade
, et al. (105 additional authors not shown)
Abstract:
The Q $\&$ U Bolometric Interferometer for Cosmology (QUBIC) is a novel kind of polarimeter optimized for the measurement of the B-mode polarization of the Cosmic Microwave Background (CMB), which is one of the major challenges of observational cosmology. The signal is expected to be of the order of a few tens of nK, prone to instrumental systematic effects and polluted by various astrophysical fo…
▽ More
The Q $\&$ U Bolometric Interferometer for Cosmology (QUBIC) is a novel kind of polarimeter optimized for the measurement of the B-mode polarization of the Cosmic Microwave Background (CMB), which is one of the major challenges of observational cosmology. The signal is expected to be of the order of a few tens of nK, prone to instrumental systematic effects and polluted by various astrophysical foregrounds which can only be controlled through multichroic observations. QUBIC is designed to address these observational issues with a novel approach that combines the advantages of interferometry in terms of control of instrumental systematic effects with those of bolometric detectors in terms of wide-band, background-limited sensitivity. The QUBIC synthesized beam has a frequency-dependent shape that results in the ability to produce maps of the CMB polarization in multiple sub-bands within the two physical bands of the instrument (150 and 220 GHz). These features make QUBIC complementary to other instruments and makes it particularly well suited to characterize and remove Galactic foreground contamination. In this article, first of a series of eight, we give an overview of the QUBIC instrument design, the main results of the calibration campaign, and present the scientific program of QUBIC including not only the measurement of primordial B-modes, but also the measurement of Galactic foregrounds. We give forecasts for typical observations and measurements: with three years of integration on the sky and assuming perfect foreground removal as well as stable atmospheric conditions from our site in Argentina, our simulations show that we can achieve a statistical sensitivity to the effective tensor-to-scalar ratio (including primordial and foreground B-modes) $σ(r)=0.015$.
△ Less
Submitted 26 August, 2021; v1 submitted 4 November, 2020;
originally announced November 2020.
-
QUBIC II: Spectro-Polarimetry with Bolometric Interferometry
Authors:
L. Mousset,
M. M. Gamboa Lerena,
E. S. Battistelli,
P. de Bernardis,
P. Chanial,
G. D'Alessandro,
G. Dashyan,
M. De Petris,
L. Grandsire,
J. -Ch. Hamilton,
F. Incardona,
S. Landau,
S. Marnieros,
S. Masi,
A. Mennella,
C. O'Sullivan,
M. Piat,
G. Ricciardi,
C. G. Scóccola,
M. Stolpovskiy,
A. Tartari,
J. -P. Thermeau,
S. A. Torchinsky,
F. Voisin,
M. Zannoni
, et al. (106 additional authors not shown)
Abstract:
Bolometric interferometry is a novel technique that has the ability to perform spectral imaging. A bolometric interferometer observes the sky in a wide frequency band and can reconstruct sky maps in several sub-bands within the physical band in post-processing of the data. This provides a powerful spectral method to discriminate between the cosmic microwave background (CMB) and astrophysical foreg…
▽ More
Bolometric interferometry is a novel technique that has the ability to perform spectral imaging. A bolometric interferometer observes the sky in a wide frequency band and can reconstruct sky maps in several sub-bands within the physical band in post-processing of the data. This provides a powerful spectral method to discriminate between the cosmic microwave background (CMB) and astrophysical foregrounds. In this paper, the methodology is illustrated with examples based on the Q \& U Bolometric Interferometer for Cosmology (QUBIC) which is a ground-based instrument designed to measure the B-mode polarization of the sky at millimeter wavelengths. We consider the specific cases of point source reconstruction and Galactic dust mapping and we characterize the point spread function as a function of frequency. We study the noise properties of spectral imaging, especially the correlations between sub-bands, using end-to-end simulations together with a fast noise simulator. We conclude showing that spectral imaging performance are nearly optimal up to five sub-bands in the case of QUBIC.
△ Less
Submitted 28 March, 2022; v1 submitted 28 October, 2020;
originally announced October 2020.
-
QUBIC VII: The feedhorn-switch system of the technological demonstrator
Authors:
F. Cavaliere,
A. Mennella,
M. Zannoni,
P. Battaglia,
E. S. Battistelli,
D. Burke,
G. D'Alessandro,
P. de Bernardis,
M. De Petris,
C. Franceschet,
L. Grandsire,
J. -Ch. Hamilton,
B. Maffei,
E. Manzan,
S. Marnieros,
S. Masi,
C. O'Sullivan,
A. Passerini,
F. Pezzotta,
M. Piat,
A. Tartari,
S. A. Torchinsky,
D. Viganò,
F. Voisin,
P. Ade
, et al. (106 additional authors not shown)
Abstract:
We present the design, manufacturing and performance of the horn-switch system developed for the technological demonstrator of QUBIC (the $Q$\&$U$ Bolometric Interferometer for Cosmology). This system is constituted of 64 back-to-back dual-band (150\,GHz and 220\,GHz) corrugated feed-horns interspersed with mechanical switches used to select desired baselines during the instrument self-calibration…
▽ More
We present the design, manufacturing and performance of the horn-switch system developed for the technological demonstrator of QUBIC (the $Q$\&$U$ Bolometric Interferometer for Cosmology). This system is constituted of 64 back-to-back dual-band (150\,GHz and 220\,GHz) corrugated feed-horns interspersed with mechanical switches used to select desired baselines during the instrument self-calibration. We manufactured the horns in aluminum platelets milled by photo-chemical etching and mechanically tightened with screws. The switches are based on steel blades that open and close the wave-guide between the back-to-back horns and are operated by miniaturized electromagnets. We also show the current development status of the feedhorn-switch system for the QUBIC full instrument, based on an array of 400 horn-switch assemblies.
△ Less
Submitted 1 April, 2022; v1 submitted 28 August, 2020;
originally announced August 2020.
-
The large scale polarization explorer (LSPE) for CMB measurements: performance forecast
Authors:
The LSPE collaboration,
G. Addamo,
P. A. R. Ade,
C. Baccigalupi,
A. M. Baldini,
P. M. Battaglia,
E. S. Battistelli,
A. Baù,
P. de Bernardis,
M. Bersanelli,
M. Biasotti,
A. Boscaleri,
B. Caccianiga,
S. Caprioli,
F. Cavaliere,
F. Cei,
K. A. Cleary,
F. Columbro,
G. Coppi,
A. Coppolecchia,
F. Cuttaia,
G. D'Alessandro,
G. De Gasperis,
M. De Petris,
V. Fafone
, et al. (80 additional authors not shown)
Abstract:
[Abridged] The measurement of the polarization of the Cosmic Microwave Background radiation is one of the current frontiers in cosmology. In particular, the detection of the primordial B-modes, could reveal the presence of gravitational waves in the early Universe. The detection of such component is at the moment the most promising technique to probe the inflationary theory describing the very ear…
▽ More
[Abridged] The measurement of the polarization of the Cosmic Microwave Background radiation is one of the current frontiers in cosmology. In particular, the detection of the primordial B-modes, could reveal the presence of gravitational waves in the early Universe. The detection of such component is at the moment the most promising technique to probe the inflationary theory describing the very early evolution of the Universe. We present the updated performance forecast of the Large Scale Polarization Explorer (LSPE), a program dedicated to the measurement of the CMB polarization. LSPE is composed of two instruments: Strip, a radiometer-based telescope on the ground in Tenerife, and SWIPE (Short-Wavelength Instrument for the Polarization Explorer) a bolometer-based instrument designed to fly on a winter arctic stratospheric long-duration balloon. The program is among the few dedicated to observation of the Northern Hemisphere, while most of the international effort is focused into ground-based observation in the Southern Hemisphere. Measurements are currently scheduled in Winter 2021/22 for SWIPE, with a flight duration up to 15 days, and in Summer 2021 with two years observations for Strip. We describe the main features of the two instruments, identifying the most critical aspects of the design, in terms of impact into performance forecast. We estimate the expected sensitivity of each instrument and propagate their combined observing power to the sensitivity to cosmological parameters, including the effect of scanning strategy, component separation, residual foregrounds and partial sky coverage. We also set requirements on the control of the most critical systematic effects and describe techniques to mitigate their impact. LSPE can reach a sensitivity in tensor-to-scalar ratio of $σ_r<0.01$, and improve constrains on other cosmological parameters.
△ Less
Submitted 9 August, 2021; v1 submitted 25 August, 2020;
originally announced August 2020.
-
QUBIC VI: cryogenic half wave plate rotator, design and performances
Authors:
G. D'Alessandro,
L. Mele,
F. Columbro,
G. Amico,
E. S. Battistelli,
P. de Bernardis,
A. Coppolecchia,
M. De Petris,
L. Grandsire,
J. -Ch. Hamilton,
L. Lamagna,
S. Marnieros,
S. Masi,
A. Mennella,
C. O'Sullivan,
A. Paiella,
F. Piacentini,
M. Piat,
G. Pisano,
G. Presta,
A. Tartari,
S. A. Torchinsky,
F. Voisin,
M. Zannoni,
P. Ade
, et al. (104 additional authors not shown)
Abstract:
Inflation Gravity Waves B-Modes polarization detection is the ultimate goal of modern large angular scale cosmic microwave background (CMB) experiments around the world. A big effort is undergoing with the deployment of many ground-based, balloon-borne and satellite experiments using different methods to separate this faint polarized component from the incoming radiation. One of the largely used t…
▽ More
Inflation Gravity Waves B-Modes polarization detection is the ultimate goal of modern large angular scale cosmic microwave background (CMB) experiments around the world. A big effort is undergoing with the deployment of many ground-based, balloon-borne and satellite experiments using different methods to separate this faint polarized component from the incoming radiation. One of the largely used technique is the Stokes Polarimetry that uses a rotating half-wave plate (HWP) and a linear polarizer to separate and modulate the polarization components with low residual cross-polarization. This paper describes the QUBIC Stokes Polarimeter highlighting its design features and its performances. A common systematic with these devices is the generation of large spurious signals synchronous with the rotation and proportional to the emissivity of the optical elements. A key feature of the QUBIC Stokes Polarimeter is to operate at cryogenic temperature in order to minimize this unwanted component. Moving efficiently this large optical element at low temperature constitutes a big engineering challenge in order to reduce friction power dissipation. Big attention has been given during the designing phase to minimize the differential thermal contractions between parts. The rotation is driven by a stepper motor placed outside the cryostat to avoid thermal load dissipation at cryogenic temperature. The tests and the results presented in this work show that the QUBIC polarimeter can easily achieve a precision below 0.1° in positioning simply using the stepper motor precision and the optical absolute encoder. The rotation induces only few mK of extra power load on the second cryogenic stage (~ 8 K).
△ Less
Submitted 19 November, 2020; v1 submitted 24 August, 2020;
originally announced August 2020.
-
QUBIC V: Cryogenic system design and performance
Authors:
S. Masi,
E. S. Battistelli,
P. de Bernardis,
C. Chapron,
F. Columbro,
G. D'Alessandro,
M. De Petris,
L. Grandsire,
J. -Ch. Hamilton,
S. Marnieros,
L. Mele,
A. May,
A. Mennella,
C. O'Sullivan,
A. Paiella,
F. Piacentini,
M. Piat,
L. Piccirillo,
G. Presta,
A. Schillaci,
A. Tartari,
J. -P. Thermeau,
S. A. Torchinsky,
F. Voisin,
M. Zannoni
, et al. (104 additional authors not shown)
Abstract:
Current experiments aimed at measuring the polarization of the Cosmic Microwave Background (CMB) use cryogenic detector arrays and cold optical systems to boost the mapping speed of the sky survey. For these reasons, large volume cryogenic systems, with large optical windows, working continuously for years, are needed. Here we report on the cryogenic system of the QUBIC (Q and U Bolometric Interfe…
▽ More
Current experiments aimed at measuring the polarization of the Cosmic Microwave Background (CMB) use cryogenic detector arrays and cold optical systems to boost the mapping speed of the sky survey. For these reasons, large volume cryogenic systems, with large optical windows, working continuously for years, are needed. Here we report on the cryogenic system of the QUBIC (Q and U Bolometric Interferometer for Cosmology) experiment: we describe its design, fabrication, experimental optimization and validation in the Technological Demonstrator configuration. The QUBIC cryogenic system is based on a large volume cryostat, using two pulse-tube refrigerators to cool at ~3K a large (~1 m^3) volume, heavy (~165kg) instrument, including the cryogenic polarization modulator, the corrugated feedhorns array, and the lower temperature stages; a 4He evaporator cooling at ~1K the interferometer beam combiner; a 3He evaporator cooling at ~0.3K the focal-plane detector arrays. The cryogenic system has been tested and validated for more than 6 months of continuous operation. The detector arrays have reached a stable operating temperature of 0.33K, while the polarization modulator has been operated from a ~10K base temperature. The system has been tilted to cover the boresight elevation range 20 deg -90 deg without significant temperature variations. The instrument is now ready for deployment to the high Argentinean Andes.
△ Less
Submitted 25 August, 2021; v1 submitted 24 August, 2020;
originally announced August 2020.
-
QUBIC VIII: Optical design and performance
Authors:
C. O'Sullivan,
M. De Petris,
G. Amico,
E. S. Battistelli,
D. Burke,
D. Buzi,
C. Chapron,
L. Conversi,
G. D'Alessandro,
P. de Bernardis,
M. De Leo,
D. Gayer,
L. Grandsire,
J. -Ch. Hamilton,
S. Marnieros,
S. Masi,
A. Mattei,
A. Mennella,
L. Mousset,
J. D. Murphy,
A. Pelosi,
M. Perciballi,
M. Piat,
S. Scully,
A. Tartari
, et al. (104 additional authors not shown)
Abstract:
The Q and U Bolometric Interferometer for Cosmology (QUBIC) is a ground-based experiment that aims to detect B-mode polarisation anisotropies in the CMB at angular scales around the l=100 recombination peak. Systematic errors make ground-based observations of B modes at millimetre wavelengths very challenging and QUBIC mitigates these problems in a somewhat complementary way to other existing or p…
▽ More
The Q and U Bolometric Interferometer for Cosmology (QUBIC) is a ground-based experiment that aims to detect B-mode polarisation anisotropies in the CMB at angular scales around the l=100 recombination peak. Systematic errors make ground-based observations of B modes at millimetre wavelengths very challenging and QUBIC mitigates these problems in a somewhat complementary way to other existing or planned experiments using the novel technique of bolometric interferometry. This technique takes advantage of the sensitivity of an imager and the systematic error control of an interferometer. A cold reflective optical combiner superimposes there-emitted beams from 400 aperture feedhorns on two focal planes. A shielding system composedof a fixed groundshield, and a forebaffle that moves with the instrument, limits the impact of local contaminants. The modelling, design, manufacturing and preliminary measurements of the optical components are described in this paper.
△ Less
Submitted 25 August, 2021; v1 submitted 23 August, 2020;
originally announced August 2020.
-
QUBIC III: Laboratory Characterization
Authors:
S. A. Torchinsky,
J. -Ch. Hamilton,
M. Piat,
E. S. Battistelli,
C. Chapron,
G. D'Alessandro,
P. de Bernardis,
M. De Petris,
M. M. Gamboa Lerena,
M. González,
L. Grandsire,
S. Masi,
S. Marnieros,
A. Mennella,
L. Mousset,
J. D. Murphy,
D. Prêle,
G. Stankowiak,
C. O'Sullivan,
A. Tartari,
J. -P. Thermeau,
F. Voisin,
M. Zannoni,
P. Ade,
J. G. Alberro
, et al. (103 additional authors not shown)
Abstract:
A prototype version of the Q & U Bolometric Interferometer for Cosmology (QUBIC) underwent a campaign of testing in the laboratory at Astroparticle Physics and Cosmology in Paris. We report the results of this Technological Demonstrator which successfully shows the feasibility of the principle of Bolometric Interferometry. Characterization of QUBIC includes the measurement of the synthesized beam,…
▽ More
A prototype version of the Q & U Bolometric Interferometer for Cosmology (QUBIC) underwent a campaign of testing in the laboratory at Astroparticle Physics and Cosmology in Paris. We report the results of this Technological Demonstrator which successfully shows the feasibility of the principle of Bolometric Interferometry. Characterization of QUBIC includes the measurement of the synthesized beam, the measurement of interference fringes, and the measurement of polarization performance. A modulated and frequency tunable millimetre-wave source in the telescope far-field is used to simulate a point source. The QUBIC pointing is scanned across the point source to produce beam maps. Polarization modulation is measured using a rotating Half Wave Plate. The measured beam matches well to the theoretical simulations and gives QUBIC the ability to do spectro imaging. The polarization performance is excellent with less than 0.5\% cross-polarization rejection. QUBIC is ready for deployment on the high altitude site at Alto Chorillo, Argentina to begin scientific operations.
△ Less
Submitted 15 March, 2022; v1 submitted 23 August, 2020;
originally announced August 2020.
-
Inflationary gravitational waves and exotic pre Big Bang Nucleosynthesis cosmology
Authors:
Alessandro Di Marco,
Gianfranco Pradisi,
Giancarlo de Gasperis,
Paolo Cabella
Abstract:
According to the most popular scenario, the early Universe should have experienced an accelerated expansion phase, called Cosmological Inflation, after which the standard Big Bang Cosmology would have taken place giving rise to the radiation-dominated epoch. However, the details of the inflationary scenario are far to be completely understood. Thus, in this paper we study if possible additional (e…
▽ More
According to the most popular scenario, the early Universe should have experienced an accelerated expansion phase, called Cosmological Inflation, after which the standard Big Bang Cosmology would have taken place giving rise to the radiation-dominated epoch. However, the details of the inflationary scenario are far to be completely understood. Thus, in this paper we study if possible additional (exotic) cosmological phases could delay the beginning of the standard Big Bang history and alter some theoretical predictions related to the inflationary cosmological perturbations, like, for instance, the order of magnitude of the tensor-to-scalar ratio $r$.
△ Less
Submitted 2 June, 2020;
originally announced June 2020.
-
Progress report on the Large Scale Polarization Explorer
Authors:
L. Lamagna,
G. Addamo,
P. A. R. Ade,
C. Baccigalupi,
A. M. Baldini,
P. M. Battaglia,
E. Battistelli,
A. Baù,
M. Bersanelli,
M. Biasotti,
C. Boragno,
A. Boscaleri,
B. Caccianiga,
S. Caprioli,
F. Cavaliere,
F. Cei,
K. A. Cleary,
F. Columbro,
G. Coppi,
A. Coppolecchia,
D. Corsini,
F. Cuttaia,
G. D'Alessandro,
P. de Bernardis,
G. De Gasperis
, et al. (74 additional authors not shown)
Abstract:
The Large Scale Polarization Explorer (LSPE) is a cosmology program for the measurement of large scale curl-like features (B-modes) in the polarization of the Cosmic Microwave Background. Its goal is to constrain the background of inflationary gravity waves traveling through the universe at the time of matter-radiation decoupling. The two instruments of LSPE are meant to synergically operate by co…
▽ More
The Large Scale Polarization Explorer (LSPE) is a cosmology program for the measurement of large scale curl-like features (B-modes) in the polarization of the Cosmic Microwave Background. Its goal is to constrain the background of inflationary gravity waves traveling through the universe at the time of matter-radiation decoupling. The two instruments of LSPE are meant to synergically operate by covering a large portion of the northern microwave sky. LSPE/STRIP is a coherent array of receivers planned to be operated from the Teide Observatory in Tenerife, for the control and characterization of the low-frequency polarized signals of galactic origin; LSPE/SWIPE is a balloon-borne bolometric polarimeter based on 330 large throughput multi-moded detectors, designed to measure the CMB polarization at 150 GHz and to monitor the polarized emission by galactic dust above 200 GHz. The combined performance and the expected level of systematics mitigation will allow LSPE to constrain primordial B-modes down to a tensor/scalar ratio of $10^{-2}$. We here report the status of the STRIP pre-commissioning phase and the progress in the characterization of the key subsystems of the SWIPE payload (namely the cryogenic polarization modulation unit and the multi-moded TES pixels) prior to receiver integration.
△ Less
Submitted 5 May, 2020; v1 submitted 3 May, 2020;
originally announced May 2020.
-
QUBIC: the Q & U Bolometric Interferometer for Cosmology
Authors:
E. S. Battistelli,
P. Ade,
J. G. Alberro,
A. Almela,
G. Amico,
L. H. Arnaldi,
D. Auguste,
J. Aumont,
S. Azzoni,
S. Banfi,
P. Battaglia,
A. Baù,
B. Bèlier,
D. Bennett,
L. Bergè,
J. -Ph. Bernard,
M. Bersanelli,
M. -A. Bigot-Sazy,
N. Bleurvacq,
J. Bonaparte,
J. Bonis,
A. Bottani,
E. Bunn,
D. Burke,
D. Buzi
, et al. (114 additional authors not shown)
Abstract:
The Q & U Bolometric Interferometer for Cosmology, QUBIC, is an innovative experiment designed to measure the polarization of the Cosmic Microwave Background and in particular the signature left therein by the inflationary expansion of the Universe. The expected signal is extremely faint, thus extreme sensitivity and systematic control are necessary in order to attempt this measurement. QUBIC addr…
▽ More
The Q & U Bolometric Interferometer for Cosmology, QUBIC, is an innovative experiment designed to measure the polarization of the Cosmic Microwave Background and in particular the signature left therein by the inflationary expansion of the Universe. The expected signal is extremely faint, thus extreme sensitivity and systematic control are necessary in order to attempt this measurement. QUBIC addresses these requirements using an innovative approach combining the sensitivity of Transition Edge Sensor cryogenic bolometers, with the deep control of systematics characteristic of interferometers. This makes QUBIC unique with respect to others classical imagers experiments devoted to the CMB polarization. In this contribution we report a description of the QUBIC instrument including recent achievements and the demonstration of the bolometric interferometry performed in lab. QUBIC will be deployed at the observation site in Alto Chorrillos, in Argentina at the end of 2019.
△ Less
Submitted 28 January, 2020;
originally announced January 2020.
-
QUBIC: using NbSi TESs with a bolometric interferometer to characterize the polarisation of the CMB
Authors:
M. Piat,
B. Bélier,
L. Bergé,
N. Bleurvacq,
C. Chapron,
S. Dheilly,
L. Dumoulin,
M. González,
L. Grandsire,
J. -Ch. Hamilton,
S. Henrot-Versillé,
D. T. Hoang,
S. Marnieros,
W. Marty,
L. Montier,
E. Olivieri,
C. Oriol,
C. Perbost,
D. Prêle,
D. Rambaud,
M. Salatino,
G. Stankowiak,
J. -P. Thermeau,
S. Torchinsky,
F. Voisin
, et al. (113 additional authors not shown)
Abstract:
QUBIC (Q \& U Bolometric Interferometer for Cosmology) is an international ground-based experiment dedicated in the measurement of the polarized fluctuations of the Cosmic Microwave Background (CMB). It is based on bolometric interferometry, an original detection technique which combine the immunity to systematic effects of an interferometer with the sensitivity of low temperature incoherent detec…
▽ More
QUBIC (Q \& U Bolometric Interferometer for Cosmology) is an international ground-based experiment dedicated in the measurement of the polarized fluctuations of the Cosmic Microwave Background (CMB). It is based on bolometric interferometry, an original detection technique which combine the immunity to systematic effects of an interferometer with the sensitivity of low temperature incoherent detectors. QUBIC will be deployed in Argentina, at the Alto Chorrillos mountain site near San Antonio de los Cobres, in the Salta province.
The QUBIC detection chain consists in 2048 NbSi Transition Edge Sensors (TESs) cooled to 350mK.The voltage-biased TESs are read out with Time Domain Multiplexing based on Superconducting QUantum Interference Devices (SQUIDs) at 1 K and a novel SiGe Application-Specific Integrated Circuit (ASIC) at 60 K allowing to reach an unprecedented multiplexing (MUX) factor equal to 128.
The QUBIC experiment is currently being characterized in the lab with a reduced number of detectors before upgrading to the full instrument. I will present the last results of this characterization phase with a focus on the detectors and readout system.
△ Less
Submitted 9 December, 2019; v1 submitted 27 November, 2019;
originally announced November 2019.
-
Energy Density, Temperature and Entropy Dynamics in Perturbative Reheating
Authors:
Alessandro Di Marco,
Giancarlo De Gasperis,
Gianfranco Pradisi,
Paolo Cabella
Abstract:
We discuss the perturbative decay of the energy density of a non standard inflaton field $ρ_φ$ and the corresponding creation of the energy density of the relativistic fields $ρ_r$ at the end of inflation, in the perfect fluid description, refining some concepts and providing some new computations. In particular, the process is characterized by two fundamental time scales. The first one,…
▽ More
We discuss the perturbative decay of the energy density of a non standard inflaton field $ρ_φ$ and the corresponding creation of the energy density of the relativistic fields $ρ_r$ at the end of inflation, in the perfect fluid description, refining some concepts and providing some new computations. In particular, the process is characterized by two fundamental time scales. The first one, $t_\text{max}$, occurs when the energy density $ρ_r$ reaches its largest value, slightly after the beginning of the reheating phase. The second one, $t_\text{reh}$, is the time in which the reheating is completely realized and the thermalization is attained. By assuming a non-instantaneous reheating phase, we are able to derive the energy densities and the temperatures of the produced relativistic bath at $t_\text{max}$ and $t_\text{reh}$, as well as the value of the corresponding horizon entropy $S_\text{hor}$, for an Equation-of-State (EoS) parameter $w\ne 0$.
△ Less
Submitted 7 January, 2020; v1 submitted 13 July, 2019;
originally announced July 2019.
-
The geometry of the magnetic field in the Central Molecular Zone measured by PILOT
Authors:
A. Mangilli,
J. Aumont,
J. -Ph. Bernard,
A. Buzzelli,
G. de Gasperis,
J. B. Durrive,
K. Ferrière,
G. Foënard,
A. Hughes,
A. Lacourt,
R. Misawa,
L. Montier,
B. Mot,
I. Ristorcelli,
H. Roussel,
P. Ade,
D. Alina,
P. de Bernardis,
E. de Gouveia Dal Pino,
J. P. Dubois,
C. Engel,
P. Hargrave,
R. Laureijs,
Y. Longval,
B. Maffei
, et al. (12 additional authors not shown)
Abstract:
We present the first far infrared (FIR) dust emission polarization map covering the full extent Milky Way's Central molecular zone (CMZ). The data, obtained with the PILOT balloon-borne experiment, covers the Galactic Center region $-2\,^\circ<l<2\,^\circ$, $-4\,^\circ<b<3\,^\circ$ at a wavelength of 240 $μ$m and an angular resolution $2.2\,'$. From our measured dust polarization angles, we infer…
▽ More
We present the first far infrared (FIR) dust emission polarization map covering the full extent Milky Way's Central molecular zone (CMZ). The data, obtained with the PILOT balloon-borne experiment, covers the Galactic Center region $-2\,^\circ<l<2\,^\circ$, $-4\,^\circ<b<3\,^\circ$ at a wavelength of 240 $μ$m and an angular resolution $2.2\,'$. From our measured dust polarization angles, we infer a magnetic field orientation projected onto the plane of the sky that is remarkably ordered over the full extent of the CMZ, with an average tilt angle of $\simeq 22\,^\circ$ clockwise with respect to the Galactic plane. Our results confirm previous claims that the field traced by dust polarized emission is oriented nearly orthogonal to the field traced by GHz radio synchrotron emission in the Galactic Center region. The observed field structure is globally compatible with the latest Planck polarization data at 353 GHz and 217 GHz. Upon subtraction of the extended emission in our data, the mean field orientation that we obtain shows good agreement with the mean field orientation measured at higher angular resolution by the JCMT within the 20 km/s and 50 km/s molecular clouds. We find no evidence that the magnetic field orientation is related to the 100 pc twisted ring structure within the CMZ. We propose that the low polarization fraction in the Galactic Center region and the highly ordered projected field orientation can be reconciled if the field is strong, with a 3D geometry that is is mostly oriented $\simeq 15\,^\circ$ with respect to the line-of-sight towards the Galactic center. Assuming equipartition between the magnetic pressure and ram pressure, we obtain magnetic field strengths estimates as high as a few mG for several CMZ molecular clouds.
△ Less
Submitted 18 January, 2019;
originally announced January 2019.
-
QUBIC: Exploring the primordial Universe with the Q\&U Bolometric Interferometer
Authors:
Aniello Mennella,
Peter Ade,
Giorgio Amico,
Didier Auguste,
Jonathan Aumont,
Stefano Banfi,
Gustavo Barbaràn,
Paola Battaglia,
Elia Battistelli,
Alessandro Baù,
Benoit Bélier,
David G. Bennett,
Laurent Bergé,
Jean Philippe Bernard,
Marco Bersanelli,
Marie Anne Bigot Sazy,
Nathat Bleurvacq,
Juan Bonaparte,
Julien Bonis,
Emory F. Bunn,
David Burke,
Daniele Buzi,
Alessandro Buzzelli,
Francesco Cavaliere,
Pierre Chanial
, et al. (105 additional authors not shown)
Abstract:
In this paper we describe QUBIC, an experiment that will observe the polarized microwave sky with a novel approach, which combines the sensitivity of state-of-the art bolometric detectors with the systematic effects control typical of interferometers. QUBIC unique features are the so-called "self-calibration", a technique that allows us to clean the measured data from instrumental effects, and its…
▽ More
In this paper we describe QUBIC, an experiment that will observe the polarized microwave sky with a novel approach, which combines the sensitivity of state-of-the art bolometric detectors with the systematic effects control typical of interferometers. QUBIC unique features are the so-called "self-calibration", a technique that allows us to clean the measured data from instrumental effects, and its spectral imaging power, i.e. the ability to separate the signal in various sub-bands within each frequency band. QUBIC will observe the sky in two main frequency bands: 150 GHz and 220 GHz. A technological demonstrator is currently under testing and will be deployed in Argentina during 2019, while the final instrument is expected to be installed during 2020.
△ Less
Submitted 23 January, 2019; v1 submitted 30 November, 2018;
originally announced December 2018.
-
Thermal architecture for the QUBIC cryogenic receiver
Authors:
A. J. May,
C. Chapron,
G. Coppi,
G. D'Alessandro,
P. de Bernardis,
S. Masi,
S. Melhuish,
M. Piat,
L. Piccirillo,
A. Schillaci,
J. -P. Thermeau,
P. Ade,
G. Amico,
D. Auguste,
J. Aumont,
S. Banfi,
G. Barbara,
P. Battaglia,
E. Battistelli,
A. Bau,
B. Belier,
D. Bennett,
L. Berge,
J. -Ph. Bernard,
M. Bersanelli
, et al. (105 additional authors not shown)
Abstract:
QUBIC, the QU Bolometric Interferometer for Cosmology, is a novel forthcoming instrument to measure the B-mode polarization anisotropy of the Cosmic Microwave Background. The detection of the B-mode signal will be extremely challenging; QUBIC has been designed to address this with a novel approach, namely bolometric interferometry. The receiver cryostat is exceptionally large and cools complex opt…
▽ More
QUBIC, the QU Bolometric Interferometer for Cosmology, is a novel forthcoming instrument to measure the B-mode polarization anisotropy of the Cosmic Microwave Background. The detection of the B-mode signal will be extremely challenging; QUBIC has been designed to address this with a novel approach, namely bolometric interferometry. The receiver cryostat is exceptionally large and cools complex optical and detector stages to 40 K, 4 K, 1 K and 350 mK using two pulse tube coolers, a novel 4He sorption cooler and a double-stage 3He/4He sorption cooler. We discuss the thermal and mechanical design of the cryostat, modelling and thermal analysis, and laboratory cryogenic testing.
△ Less
Submitted 6 November, 2018;
originally announced November 2018.
-
QUBIC - The Q&U Bolometric Interferometer for Cosmology - A novel way to look at the polarized Cosmic Microwave Background
Authors:
A. Mennella,
P. A. R. Ade,
J. Aumont,
S. Banfi,
P. Battaglia,
E. S. Battistelli,
A. Baù,
B. Bélier,
D. Bennett,
L. Bergé,
J. Ph. Bernard,
M. Bersanelli,
M. A. Bigot-Sazy,
N. Bleurvacq,
G. Bordier,
J. Brossard,
E. F. Bunn,
D. P. Burke,
D. Buzi,
A. Buzzelli,
D. Cammilleri,
F. Cavaliere,
P. Chanial,
C. Chapron,
F. Columbro
, et al. (83 additional authors not shown)
Abstract:
In this paper we describe QUBIC, an experiment that takes up the challenge posed by the detection of primordial gravitational waves with a novel approach, that combines the sensitivity of state-of-the art bolometric detectors with the systematic effects control typical of interferometers. The so-called "self-calibration" is a technique deeply rooted in the interferometric nature of the instrument…
▽ More
In this paper we describe QUBIC, an experiment that takes up the challenge posed by the detection of primordial gravitational waves with a novel approach, that combines the sensitivity of state-of-the art bolometric detectors with the systematic effects control typical of interferometers. The so-called "self-calibration" is a technique deeply rooted in the interferometric nature of the instrument and allows us to clean the measured data from instrumental effects. The first module of QUBIC is a dual band instrument (150 GHz and 220 GHz) that will be deployed in Argentina during the Fall 2018.
△ Less
Submitted 11 January, 2018;
originally announced January 2018.
-
Optimization of the half wave plate configuration for the LSPE-SWIPE experiment
Authors:
Alessandro Buzzelli,
Giancarlo de Gasperis,
Paolo de Bernardis,
Silvia Masi,
Nicola Vittorio
Abstract:
The search for the B-mode polarization of Cosmic Microwave Background (CMB) is the new frontier of observational Cosmology. A B-mode detection would give an ultimate confirmation to the existence of a primordial Gravitational Wave (GW) background as predicted in the inflationary scenario. Several experiments have been designed or planned to observe B-modes. In this work we focus on the forthcoming…
▽ More
The search for the B-mode polarization of Cosmic Microwave Background (CMB) is the new frontier of observational Cosmology. A B-mode detection would give an ultimate confirmation to the existence of a primordial Gravitational Wave (GW) background as predicted in the inflationary scenario. Several experiments have been designed or planned to observe B-modes. In this work we focus on the forthcoming Large Scale Polarization Explorer (LSPE) experiment, that will be devoted to the accurate measurement of CMB polarization at large angular scales. LSPE consists of a balloon-borne bolometric instrument, the Short Wavelength Instrument for the Polarization Explorer (SWIPE), and a ground-based coherent polarimeter array, the STRatospheric Italian Polarimeter (STRIP). SWIPE will employ a rotating Half Wave Plate (HWP) polarization modulator to mitigate the systematic effects due to instrumental non-idealities. We present here preliminary forecasts aimed at optimizing the HWP configuration.
△ Less
Submitted 14 September, 2017;
originally announced September 2017.
-
Optimal strategy for polarization modulation in the LSPE-SWIPE experiment
Authors:
Alessandro Buzzelli,
Paolo de Bernardis,
Silvia Masi,
Nicola Vittorio,
Giancarlo de Gasperis
Abstract:
CMB B-mode experiments are required to control systematic effects with an unprecedented level of accuracy. Polarization modulation by a half wave plate (HWP) is a powerful technique able to mitigate a large number of the instrumental systematics. Our goal is to optimize the polarization modulation strategy of the upcoming LSPE-SWIPE balloon-borne experiment, devoted to the accurate measurement of…
▽ More
CMB B-mode experiments are required to control systematic effects with an unprecedented level of accuracy. Polarization modulation by a half wave plate (HWP) is a powerful technique able to mitigate a large number of the instrumental systematics. Our goal is to optimize the polarization modulation strategy of the upcoming LSPE-SWIPE balloon-borne experiment, devoted to the accurate measurement of CMB polarization at large angular scales. We depart from the nominal LSPE-SWIPE modulation strategy (HWP stepped every 60 s with a telescope scanning at around 12 deg/s) and perform a thorough investigation of a wide range of possible HWP schemes (either in stepped or continuously spinning mode and at different azimuth telescope scan-speeds) in the frequency, map and angular power spectrum domain. In addition, we probe the effect of high-pass and band-pass filters of the data stream and explore the HWP response in the minimal case of one detector for one operation day (critical for the single-detector calibration process). We finally test the modulation performance against typical HWP-induced systematics. Our analysis shows that some stepped HWP schemes, either slowly rotating or combined with slow telescope modulations, represent poor choices. Moreover, our results point out that the nominal configuration may not be the most convenient choice. While a large class of spinning designs provides comparable results in terms of pixel angle coverage, map-making residuals and BB power spectrum standard deviations with respect to the nominal strategy, we find that some specific configurations (e.g., a rapidly spinning HWP with a slow gondola modulation) allow a more efficient polarization recovery in more general real-case situations. Although our simulations are specific to the LSPE-SWIPE mission, the general outcomes of our analysis can be easily generalized to other CMB polarization experiments.
△ Less
Submitted 14 September, 2017;
originally announced September 2017.
-
Exploring cosmic origins with CORE: mitigation of systematic effects
Authors:
P. Natoli,
M. Ashdown,
R. Banerji,
J. Borrill,
A. Buzzelli,
G. de Gasperis,
J. Delabrouille,
E. Hivon,
D. Molinari,
G. Patanchon,
L. Polastri,
M. Tomasi,
F. R. Bouchet,
S. Henrot-Versillé,
D. T. Hoang,
R. Keskitalo,
K. Kiiveri,
T. Kisner,
V. Lindholm,
D. McCarthy,
F. Piacentini,
O. Perdereau,
G. Polenta,
M. Tristram,
A. Achucarro
, et al. (101 additional authors not shown)
Abstract:
We present an analysis of the main systematic effects that could impact the measurement of CMB polarization with the proposed CORE space mission. We employ timeline-to-map simulations to verify that the CORE instrumental set-up and scanning strategy allow us to measure sky polarization to a level of accuracy adequate to the mission science goals. We also show how the CORE observations can be proce…
▽ More
We present an analysis of the main systematic effects that could impact the measurement of CMB polarization with the proposed CORE space mission. We employ timeline-to-map simulations to verify that the CORE instrumental set-up and scanning strategy allow us to measure sky polarization to a level of accuracy adequate to the mission science goals. We also show how the CORE observations can be processed to mitigate the level of contamination by potentially worrying systematics, including intensity-to-polarization leakage due to bandpass mismatch, asymmetric main beams, pointing errors and correlated noise. We use analysis techniques that are well validated on data from current missions such as Planck to demonstrate how the residual contamination of the measurements by these effects can be brought to a level low enough not to hamper the scientific capability of the mission, nor significantly increase the overall error budget. We also present a prototype of the CORE photometric calibration pipeline, based on that used for Planck, and discuss its robustness to systematics, showing how CORE can achieve its calibration requirements. While a fine-grained assessment of the impact of systematics requires a level of knowledge of the system that can only be achieved in a future study phase, the analysis presented here strongly suggests that the main areas of concern for the CORE mission can be addressed using existing knowledge, techniques and algorithms.
△ Less
Submitted 13 July, 2017;
originally announced July 2017.
-
Exploring cosmic origins with CORE: gravitational lensing of the CMB
Authors:
Anthony Challinor,
Rupert Allison,
Julien Carron,
Josquin Errard,
Stephen Feeney,
Thomas Kitching,
Julien Lesgourgues,
Antony Lewis,
Íñigo Zubeldía,
Ana Achucarro,
Peter Ade,
Mark Ashdown,
Mario Ballardini,
A. J. Banday,
Ranajoy Banerji,
James Bartlett,
Nicola Bartolo,
Soumen Basak,
Daniel Baumann,
Marco Bersanelli,
Anna Bonaldi,
Matteo Bonato,
Julian Borrill,
François Bouchet,
François Boulanger
, et al. (88 additional authors not shown)
Abstract:
Lensing of the CMB is now a well-developed probe of large-scale clustering over a broad range of redshifts. By exploiting the non-Gaussian imprints of lensing in the polarization of the CMB, the CORE mission can produce a clean map of the lensing deflections over nearly the full-sky. The number of high-S/N modes in this map will exceed current CMB lensing maps by a factor of 40, and the measuremen…
▽ More
Lensing of the CMB is now a well-developed probe of large-scale clustering over a broad range of redshifts. By exploiting the non-Gaussian imprints of lensing in the polarization of the CMB, the CORE mission can produce a clean map of the lensing deflections over nearly the full-sky. The number of high-S/N modes in this map will exceed current CMB lensing maps by a factor of 40, and the measurement will be sample-variance limited on all scales where linear theory is valid. Here, we summarise this mission product and discuss the science that it will enable. For example, the summed mass of neutrinos will be determined to an accuracy of 17 meV combining CORE lensing and CMB two-point information with contemporaneous BAO measurements, three times smaller than the minimum total mass allowed by neutrino oscillations. In the search for B-mode polarization from primordial gravitational waves with CORE, lens-induced B-modes will dominate over instrument noise, limiting constraints on the gravitational wave power spectrum amplitude. With lensing reconstructed by CORE, one can "delens" the observed polarization internally, reducing the lensing B-mode power by 60%. This improves to 70% by combining lensing and CIB measurements from CORE, reducing the error on the gravitational wave amplitude by 2.5 compared to no delensing (in the null hypothesis). Lensing measurements from CORE will allow calibration of the halo masses of the 40000 galaxy clusters that it will find, with constraints dominated by the clean polarization-based estimators. CORE can accurately remove Galactic emission from CMB maps with its 19 frequency channels. We present initial findings that show that residual Galactic foreground contamination will not be a significant source of bias for lensing power spectrum measurements with CORE. [abridged]
△ Less
Submitted 7 July, 2017;
originally announced July 2017.
-
Exploring Cosmic Origins with CORE: Survey requirements and mission design
Authors:
J. Delabrouille,
P. de Bernardis,
F. R. Bouchet,
A. Achúcarro,
P. A. R. Ade,
R. Allison,
F. Arroja,
E. Artal,
M. Ashdown,
C. Baccigalupi,
M. Ballardini,
A. J. Banday,
R. Banerji,
D. Barbosa,
J. Bartlett,
N. Bartolo,
S. Basak,
J. J. A. Baselmans,
K. Basu,
E. S. Battistelli,
R. Battye,
D. Baumann,
A. Benoît,
M. Bersanelli,
A. Bideaud
, et al. (178 additional authors not shown)
Abstract:
Future observations of cosmic microwave background (CMB) polarisation have the potential to answer some of the most fundamental questions of modern physics and cosmology. In this paper, we list the requirements for a future CMB polarisation survey addressing these scientific objectives, and discuss the design drivers of the CORE space mission proposed to ESA in answer to the "M5" call for a medium…
▽ More
Future observations of cosmic microwave background (CMB) polarisation have the potential to answer some of the most fundamental questions of modern physics and cosmology. In this paper, we list the requirements for a future CMB polarisation survey addressing these scientific objectives, and discuss the design drivers of the CORE space mission proposed to ESA in answer to the "M5" call for a medium-sized mission. The rationale and options, and the methodologies used to assess the mission's performance, are of interest to other future CMB mission design studies. CORE is designed as a near-ultimate CMB polarisation mission which, for optimal complementarity with ground-based observations, will perform the observations that are known to be essential to CMB polarisation scienceand cannot be obtained by any other means than a dedicated space mission.
△ Less
Submitted 14 June, 2017;
originally announced June 2017.
-
Exploring Cosmic Origins with CORE: The Instrument
Authors:
P. de Bernardis,
P. A. R. Ade,
J. J. A. Baselmans,
E. S. Battistelli,
A. Benoit,
M. Bersanelli,
A. Bideaud,
M. Calvo,
F. J. Casas,
G. Castellano,
A. Catalano,
I. Charles,
I. Colantoni,
F. Columbro,
A. Coppolecchia,
M. Crook,
G. D'Alessandro,
M. De Petris,
J. Delabrouille,
S. Doyle,
C. Franceschet,
A. Gomez,
J. Goupy,
S. Hanany,
M. Hills
, et al. (104 additional authors not shown)
Abstract:
We describe a space-borne, multi-band, multi-beam polarimeter aiming at a precise and accurate measurement of the polarization of the Cosmic Microwave Background. The instrument is optimized to be compatible with the strict budget requirements of a medium-size space mission within the Cosmic Vision Programme of the European Space Agency. The instrument has no moving parts, and uses arrays of diffr…
▽ More
We describe a space-borne, multi-band, multi-beam polarimeter aiming at a precise and accurate measurement of the polarization of the Cosmic Microwave Background. The instrument is optimized to be compatible with the strict budget requirements of a medium-size space mission within the Cosmic Vision Programme of the European Space Agency. The instrument has no moving parts, and uses arrays of diffraction-limited Kinetic Inductance Detectors to cover the frequency range from 60 GHz to 600 GHz in 19 wide bands, in the focal plane of a 1.2 m aperture telescope cooled at 40 K, allowing for an accurate extraction of the CMB signal from polarized foreground emission. The projected CMB polarization survey sensitivity of this instrument, after foregrounds removal, is 1.7 μK$\cdot$arcmin. The design is robust enough to allow, if needed, a downscoped version of the instrument covering the 100 GHz to 600 GHz range with a 0.8 m aperture telescope cooled at 85 K, with a projected CMB polarization survey sensitivity of 3.2 μK$\cdot$arcmin.
△ Less
Submitted 22 May, 2017; v1 submitted 5 May, 2017;
originally announced May 2017.
-
Exploring cosmic origins with CORE: effects of observer peculiar motion
Authors:
C. Burigana,
C. S. Carvalho,
T. Trombetti,
A. Notari,
M. Quartin,
G. De Gasperis,
A. Buzzelli,
N. Vittorio,
G. De Zotti,
P. de Bernardis,
J. Chluba,
M. Bilicki,
L. Danese,
J. Delabrouille,
L. Toffolatti,
A. Lapi,
M. Negrello,
P. Mazzotta,
D. Scott,
D. Contreras,
A. Achucarro,
P. Ade,
R. Allison,
M. Ashdown,
M. Ballardini
, et al. (94 additional authors not shown)
Abstract:
We discuss the effects on the CMB, CIB, and thermal SZ effect due to the peculiar motion of an observer with respect to the CMB rest frame, which induces boosting effects. We investigate the scientific perspectives opened by future CMB space missions, focussing on the CORE proposal. The improvements in sensitivity offered by a mission like CORE, together with its high resolution over a wide freque…
▽ More
We discuss the effects on the CMB, CIB, and thermal SZ effect due to the peculiar motion of an observer with respect to the CMB rest frame, which induces boosting effects. We investigate the scientific perspectives opened by future CMB space missions, focussing on the CORE proposal. The improvements in sensitivity offered by a mission like CORE, together with its high resolution over a wide frequency range, will provide a more accurate estimate of the CMB dipole. The extension of boosting effects to polarization and cross-correlations will enable a more robust determination of purely velocity-driven effects that are not degenerate with the intrinsic CMB dipole, allowing us to achieve a S/N ratio of 13; this improves on the Planck detection and essentially equals that of an ideal cosmic-variance-limited experiment up to a multipole l of 2000. Precise inter-frequency calibration will offer the opportunity to constrain or even detect CMB spectral distortions, particularly from the cosmological reionization, because of the frequency dependence of the dipole spectrum, without resorting to precise absolute calibration. The expected improvement with respect to COBE-FIRAS in the recovery of distortion parameters (in principle, a factor of several hundred for an ideal experiment with the CORE configuration) ranges from a factor of several up to about 50, depending on the quality of foreground removal and relative calibration. Even for 1% accuracy in both foreground removal and relative calibration at an angular scale of 1 deg, we find that dipole analyses for a mission like CORE will be able to improve the recovery of the CIB spectrum amplitude by a factor of 17 in comparison with current results based on FIRAS. In addition to the scientific potential of a mission like CORE for these analyses, synergies with other planned and ongoing projects are also discussed.
△ Less
Submitted 30 August, 2017; v1 submitted 19 April, 2017;
originally announced April 2017.
-
Exploring Cosmic Origins with CORE: B-mode Component Separation
Authors:
M. Remazeilles,
A. J. Banday,
C. Baccigalupi,
S. Basak,
A. Bonaldi,
G. De Zotti,
J. Delabrouille,
C. Dickinson,
H. K. Eriksen,
J. Errard,
R. Fernandez-Cobos,
U. Fuskeland,
C. Hervías-Caimapo,
M. López-Caniego,
E. Martinez-González,
M. Roman,
P. Vielva,
I. Wehus,
A. Achucarro,
P. Ade,
R. Allison,
M. Ashdown,
M. Ballardini,
R. Banerji,
N. Bartolo
, et al. (91 additional authors not shown)
Abstract:
We demonstrate that, for the baseline design of the CORE satellite mission, the polarized foregrounds can be controlled at the level required to allow the detection of the primordial cosmic microwave background (CMB) $B$-mode polarization with the desired accuracy at both reionization and recombination scales, for tensor-to-scalar ratio values of ${r\gtrsim 5\times 10^{-3}}$. We consider detailed…
▽ More
We demonstrate that, for the baseline design of the CORE satellite mission, the polarized foregrounds can be controlled at the level required to allow the detection of the primordial cosmic microwave background (CMB) $B$-mode polarization with the desired accuracy at both reionization and recombination scales, for tensor-to-scalar ratio values of ${r\gtrsim 5\times 10^{-3}}$. We consider detailed sky simulations based on state-of-the-art CMB observations that consist of CMB polarization with $τ=0.055$ and tensor-to-scalar values ranging from $r=10^{-2}$ to $10^{-3}$, Galactic synchrotron, and thermal dust polarization with variable spectral indices over the sky, polarized anomalous microwave emission, polarized infrared and radio sources, and gravitational lensing effects. Using both parametric and blind approaches, we perform full component separation and likelihood analysis of the simulations, allowing us to quantify both uncertainties and biases on the reconstructed primordial $B$-modes. Under the assumption of perfect control of lensing effects, CORE would measure an unbiased estimate of $r=\left(5 \pm 0.4\right)\times 10^{-3}$ after foreground cleaning. In the presence of both gravitational lensing effects and astrophysical foregrounds, the significance of the detection is lowered, with CORE achieving a $4σ$-measurement of $r=5\times 10^{-3}$ after foreground cleaning and $60$% delensing. For lower tensor-to-scalar ratios ($r=10^{-3}$) the overall uncertainty on $r$ is dominated by foreground residuals, not by the 40% residual of lensing cosmic variance. Moreover, the residual contribution of unprocessed polarized point-sources can be the dominant foreground contamination to primordial B-modes at this $r$ level, even on relatively large angular scales, $\ell \sim 50$. Finally, we report two sources of potential bias for the detection of the primordial $B$-modes.[abridged]
△ Less
Submitted 19 June, 2017; v1 submitted 14 April, 2017;
originally announced April 2017.
-
Exploring Cosmic Origins with CORE: Cluster Science
Authors:
J. -B. Melin,
A. Bonaldi,
M. Remazeilles,
S. Hagstotz,
J. M. Diego,
C. Hernández-Monteagudo,
R. T. Génova-Santos,
G. Luzzi,
C. J. A. P. Martins,
S. Grandis,
J. J. Mohr,
J. G. Bartlett,
J. Delabrouille,
S. Ferraro,
D. Tramonte,
J. A. Rubiño-Martín,
J. F. Macìas-Pérez,
A. Achúcarro,
P. Ade,
R. Allison,
M. Ashdown,
M. Ballardini,
A. J. Banday,
R. Banerji,
N. Bartolo
, et al. (96 additional authors not shown)
Abstract:
We examine the cosmological constraints that can be achieved with a galaxy cluster survey with the future CORE space mission. Using realistic simulations of the millimeter sky, produced with the latest version of the Planck Sky Model, we characterize the CORE cluster catalogues as a function of the main mission performance parameters. We pay particular attention to telescope size, key to improved…
▽ More
We examine the cosmological constraints that can be achieved with a galaxy cluster survey with the future CORE space mission. Using realistic simulations of the millimeter sky, produced with the latest version of the Planck Sky Model, we characterize the CORE cluster catalogues as a function of the main mission performance parameters. We pay particular attention to telescope size, key to improved angular resolution, and discuss the comparison and the complementarity of CORE with ambitious future ground-based CMB experiments that could be deployed in the next decade. A possible CORE mission concept with a 150 cm diameter primary mirror can detect of the order of 50,000 clusters through the thermal Sunyaev-Zeldovich effect (SZE). The total yield increases (decreases) by 25% when increasing (decreasing) the mirror diameter by 30 cm. The 150 cm telescope configuration will detect the most massive clusters ($>10^{14}\, M_\odot$) at redshift $z>1.5$ over the whole sky, although the exact number above this redshift is tied to the uncertain evolution of the cluster SZE flux-mass relation; assuming self-similar evolution, CORE will detect $\sim 500$ clusters at redshift $z>1.5$. This changes to 800 (200) when increasing (decreasing) the mirror size by 30 cm. CORE will be able to measure individual cluster halo masses through lensing of the cosmic microwave background anisotropies with a 1-$σ$ sensitivity of $4\times10^{14} M_\odot$, for a 120 cm aperture telescope, and $10^{14} M_\odot$ for a 180 cm one. [abridged]
△ Less
Submitted 30 March, 2017;
originally announced March 2017.
-
Exploring Cosmic Origins with CORE: Inflation
Authors:
CORE Collaboration,
Fabio Finelli,
Martin Bucher,
Ana Achúcarro,
Mario Ballardini,
Nicola Bartolo,
Daniel Baumann,
Sébastien Clesse,
Josquin Errard,
Will Handley,
Mark Hindmarsh,
Kimmo Kiiveri,
Martin Kunz,
Anthony Lasenby,
Michele Liguori,
Daniela Paoletti,
Christophe Ringeval,
Jussi Väliviita,
Bartjan van Tent,
Vincent Vennin,
Rupert Allison,
Frederico Arroja,
Marc Ashdown,
A. J. Banday,
Ranajoy Banerji
, et al. (107 additional authors not shown)
Abstract:
We forecast the scientific capabilities to improve our understanding of cosmic inflation of CORE, a proposed CMB space satellite submitted in response to the ESA fifth call for a medium-size mission opportunity. The CORE satellite will map the CMB anisotropies in temperature and polarization in 19 frequency channels spanning the range 60-600 GHz. CORE will have an aggregate noise sensitivity of…
▽ More
We forecast the scientific capabilities to improve our understanding of cosmic inflation of CORE, a proposed CMB space satellite submitted in response to the ESA fifth call for a medium-size mission opportunity. The CORE satellite will map the CMB anisotropies in temperature and polarization in 19 frequency channels spanning the range 60-600 GHz. CORE will have an aggregate noise sensitivity of $1.7 μ$K$\cdot \,$arcmin and an angular resolution of 5' at 200 GHz. We explore the impact of telescope size and noise sensitivity on the inflation science return by making forecasts for several instrumental configurations. This study assumes that the lower and higher frequency channels suffice to remove foreground contaminations and complements other related studies of component separation and systematic effects, which will be reported in other papers of the series "Exploring Cosmic Origins with CORE." We forecast the capability to determine key inflationary parameters, to lower the detection limit for the tensor-to-scalar ratio down to the $10^{-3}$ level, to chart the landscape of single field slow-roll inflationary models, to constrain the epoch of reheating, thus connecting inflation to the standard radiation-matter dominated Big Bang era, to reconstruct the primordial power spectrum, to constrain the contribution from isocurvature perturbations to the $10^{-3}$ level, to improve constraints on the cosmic string tension to a level below the presumptive GUT scale, and to improve the current measurements of primordial non-Gaussianities down to the $f_{NL}^{\rm local} < 1$ level. For all the models explored, CORE alone will improve significantly on the present constraints on the physics of inflation. Its capabilities will be further enhanced by combining with complementary future cosmological observations.
△ Less
Submitted 5 April, 2017; v1 submitted 25 December, 2016;
originally announced December 2016.
-
Exploring Cosmic Origins with CORE: Cosmological Parameters
Authors:
Eleonora Di Valentino,
Thejs Brinckmann,
Martina Gerbino,
Vivian Poulin,
François R. Bouchet,
Julien Lesgourgues,
Alessandro Melchiorri,
Jens Chluba,
Sebastien Clesse,
Jacques Delabrouille,
Cora Dvorkin,
Francesco Forastieri,
Silvia Galli,
Deanna C. Hooper,
Massimiliano Lattanzi,
Carlos J. A. P. Martins,
Laura Salvati,
Giovanni Cabass,
Andrea Caputo,
Elena Giusarma,
Eric Hivon,
Paolo Natoli,
Luca Pagano,
Simone Paradiso,
Jose Alberto Rubino-Martin
, et al. (103 additional authors not shown)
Abstract:
We forecast the main cosmological parameter constraints achievable with the CORE space mission which is dedicated to mapping the polarisation of the Cosmic Microwave Background (CMB). CORE was recently submitted in response to ESA's fifth call for medium-sized mission proposals (M5). Here we report the results from our pre-submission study of the impact of various instrumental options, in particul…
▽ More
We forecast the main cosmological parameter constraints achievable with the CORE space mission which is dedicated to mapping the polarisation of the Cosmic Microwave Background (CMB). CORE was recently submitted in response to ESA's fifth call for medium-sized mission proposals (M5). Here we report the results from our pre-submission study of the impact of various instrumental options, in particular the telescope size and sensitivity level, and review the great, transformative potential of the mission as proposed. Specifically, we assess the impact on a broad range of fundamental parameters of our Universe as a function of the expected CMB characteristics, with other papers in the series focusing on controlling astrophysical and instrumental residual systematics. In this paper, we assume that only a few central CORE frequency channels are usable for our purpose, all others being devoted to the cleaning of astrophysical contaminants. On the theoretical side, we assume LCDM as our general framework and quantify the improvement provided by CORE over the current constraints from the Planck 2015 release. We also study the joint sensitivity of CORE and of future Baryon Acoustic Oscillation and Large Scale Structure experiments like DESI and Euclid. Specific constraints on the physics of inflation are presented in another paper of the series. In addition to the six parameters of the base LCDM, which describe the matter content of a spatially flat universe with adiabatic and scalar primordial fluctuations from inflation, we derive the precision achievable on parameters like those describing curvature, neutrino physics, extra light relics, primordial helium abundance, dark matter annihilation, recombination physics, variation of fundamental constants, dark energy, modified gravity, reionization and cosmic birefringence. (ABRIDGED)
△ Less
Submitted 5 April, 2017; v1 submitted 30 November, 2016;
originally announced December 2016.
-
Exploring Cosmic Origins with CORE: Extragalactic sources in Cosmic Microwave Background maps
Authors:
G. De Zotti,
J. Gonzalez-Nuevo,
M. Lopez-Caniego,
M. Negrello,
J. Greenslade,
C. Hernandez-Monteagudo,
J. Delabrouille,
Z. -Y. Cai,
M. Bonato,
A. Achucarro,
P. Ade,
R. Allison,
M. Ashdown,
M. Ballardini,
A. J. Banday,
R. Banerji,
J. G. Bartlett,
N. Bartolo,
S. Basak,
M. Bersanelli,
M. Biesiada,
M. Bilicki,
A. Bonaldi,
J. Borrill,
F. Bouchet
, et al. (99 additional authors not shown)
Abstract:
We discuss the potential of a next generation space-borne Cosmic Microwave Background (CMB) experiment for studies of extragalactic sources. Our analysis has particular bearing on the definition of the future space project, CORE, that has been submitted in response to ESA's call for a Medium-size mission opportunity as the successor of the Planck satellite. Even though the effective telescope size…
▽ More
We discuss the potential of a next generation space-borne Cosmic Microwave Background (CMB) experiment for studies of extragalactic sources. Our analysis has particular bearing on the definition of the future space project, CORE, that has been submitted in response to ESA's call for a Medium-size mission opportunity as the successor of the Planck satellite. Even though the effective telescope size will be somewhat smaller than that of Planck, CORE will have a considerably better angular resolution at its highest frequencies, since, in contrast with Planck, it will be diffraction limited at all frequencies. The improved resolution implies a considerable decrease of the source confusion, i.e. substantially fainter detection limits. In particular, CORE will detect thousands of strongly lensed high-z galaxies distributed over the full sky. The extreme brightness of these galaxies will make it possible to study them, via follow-up observations, in extraordinary detail. Also, the CORE resolution matches the typical sizes of high-z galaxy proto-clusters much better than the Planck resolution, resulting in a much higher detection efficiency; these objects will be caught in an evolutionary phase beyond the reach of surveys in other wavebands. Furthermore, CORE will provide unique information on the evolution of the star formation in virialized groups and clusters of galaxies up to the highest possible redshifts. Finally, thanks to its very high sensitivity, CORE will detect the polarized emission of thousands of radio sources and, for the first time, of dusty galaxies, at mm and sub-mm wavelengths, respectively.
△ Less
Submitted 18 May, 2017; v1 submitted 23 September, 2016;
originally announced September 2016.
-
QUBIC Technical Design Report
Authors:
J. Aumont,
S. Banfi,
P. Battaglia,
E. S. Battistelli,
A. Baù,
B. Bélier,
D. Bennett,
L. Bergé,
J. Ph. Bernard,
M. Bersanelli,
M. A. Bigot-Sazy,
N. Bleurvacq,
G. Bordier,
J. Brossard,
E. F. Bunn,
D. Buzi,
A. Buzzelli,
D. Cammilleri,
F. Cavaliere,
P. Chanial,
C. Chapron,
G. Coppi,
A. Coppolecchia,
F. Couchot,
R. D'Agostino
, et al. (74 additional authors not shown)
Abstract:
QUBIC is an instrument aiming at measuring the B mode polarisation anisotropies at medium scales angular scales (30-200 multipoles). The search for the primordial CMB B-mode polarization signal is challenging, because of many difficulties: smallness of the expected signal, instrumental systematics that could possibly induce polarization leakage from the large E signal into B, brighter than anticip…
▽ More
QUBIC is an instrument aiming at measuring the B mode polarisation anisotropies at medium scales angular scales (30-200 multipoles). The search for the primordial CMB B-mode polarization signal is challenging, because of many difficulties: smallness of the expected signal, instrumental systematics that could possibly induce polarization leakage from the large E signal into B, brighter than anticipated polarized foregrounds (dust) reducing to zero the initial hope of finding sky regions clean enough to have a direct primordial B-modes observation. The QUBIC instrument is designed to address all aspects of this challenge with a novel kind of instrument, a Bolometric Interferometer, combining the background-limited sensitivity of Transition-Edge-Sensors and the control of systematics allowed by the observation of interference fringe patterns, while operating at two frequencies to disentangle polarized foregrounds from primordial B mode polarization. Its characteristics are described in details in this Technological Design Report.
△ Less
Submitted 11 May, 2017; v1 submitted 14 September, 2016;
originally announced September 2016.
-
Polarization of Cosmic Microwave Background
Authors:
Alessandro Buzzelli,
Paolo Cabella,
Giancarlo de Gasperis,
Nicola Vittorio
Abstract:
In this work we present an extension of the ROMA map-making code for data analysis of Cosmic Microwave Background polarization, with particular attention given to the inflationary polarization B-modes. The new algorithm takes into account a possible cross-correlated noise component among the different detectors of a CMB experiment. We tested the code on the observational data of the BOOMERanG (200…
▽ More
In this work we present an extension of the ROMA map-making code for data analysis of Cosmic Microwave Background polarization, with particular attention given to the inflationary polarization B-modes. The new algorithm takes into account a possible cross-correlated noise component among the different detectors of a CMB experiment. We tested the code on the observational data of the BOOMERanG (2003) experiment and we show that we are provided with a better estimate of the power spectra, in particular the error bars of the BB spectrum are smaller up to 20% for low multipoles. We point out the general validity of the new method. A possible future application is the LSPE balloon experiment, devoted to the observation of polarization at large angular scales.
△ Less
Submitted 7 April, 2016;
originally announced April 2016.
-
Optimal cosmic microwave background map-making in the presence of cross-correlated noise
Authors:
Giancarlo de Gasperis,
Alessandro Buzzelli,
Paolo Cabella,
Paolo de Bernardis,
Nicola Vittorio
Abstract:
We present an extension of the ROMA map-making algorithm for the generation of optimal cosmic microwave background polarization maps. The new code allows for a possible cross-correlated noise component among the detectors of a CMB experiment. A promising application is the forthcoming LSPE balloon-borne experiment, which is devoted to the accurate observation of CMB polarization at large angular s…
▽ More
We present an extension of the ROMA map-making algorithm for the generation of optimal cosmic microwave background polarization maps. The new code allows for a possible cross-correlated noise component among the detectors of a CMB experiment. A promising application is the forthcoming LSPE balloon-borne experiment, which is devoted to the accurate observation of CMB polarization at large angular scales. We generalized the noise covariance matrix in time domain to account for all the off-diagonal terms due to the detector cross-talk. Hence, we performed preliminary forecasts of the LSPE-SWIPE instrument. We found that considering the noise cross-correlation among the detectors results in a more realistic estimate of the angular power spectra. In particular, the extended ROMA algorithm has provided a considerable reduction of the spectra error bars. We expect that this improvement could be crucial in constraining the B-mode polarization at the largest scales.
△ Less
Submitted 8 August, 2016; v1 submitted 18 January, 2016;
originally announced January 2016.
-
Planck intermediate results. XIII. Constraints on peculiar velocities
Authors:
Planck Collaboration,
P. A. R. Ade,
N. Aghanim,
M. Arnaud,
M. Ashdown,
J. Aumont,
C. Baccigalupi,
A. Balbi,
A. J. Banday,
R. B. Barreiro,
E. Battaner,
K. Benabed,
A. Benoit-Levy,
J. -P. Bernard,
M. Bersanelli,
P. Bielewicz,
I. Bikmaev,
J. Bobin,
J. J. Bock,
A. Bonaldi,
J. R. Bond,
J. Borrill,
F. R. Bouchet,
C. Burigana,
R. C. Butler
, et al. (160 additional authors not shown)
Abstract:
Using \Planck\ data combined with the Meta Catalogue of X-ray detected Clusters of galaxies (MCXC), we address the study of peculiar motions by searching for evidence of the kinetic Sunyaev-Zeldovich effect (kSZ). By implementing various filters designed to extract the kSZ generated at the positions of the clusters, we obtain consistent constraints on the radial peculiar velocity average, root mea…
▽ More
Using \Planck\ data combined with the Meta Catalogue of X-ray detected Clusters of galaxies (MCXC), we address the study of peculiar motions by searching for evidence of the kinetic Sunyaev-Zeldovich effect (kSZ). By implementing various filters designed to extract the kSZ generated at the positions of the clusters, we obtain consistent constraints on the radial peculiar velocity average, root mean square (rms), and local bulk flow amplitude at different depths. For the whole cluster sample of average redshift 0.18, the measured average radial peculiar velocity with respect to the cosmic microwave background (CMB) radiation at that redshift, i.e., the kSZ monopole, amounts to $72 \pm 60$ km s$^{-1}$. This constitutes less than 1% of the relative Hubble velocity of the cluster sample with respect to our local CMB frame. While the linear $Λ$CDM prediction for the typical cluster radial velocity rms at $z=0.15$ is close to 230km s$^{-1}$, the upper limit imposed by \Planck\ data on the cluster subsample corresponds to 800 km s$^{-1}$ at 95% confidence level, i.e., about three times higher. \Planck\ data also set strong constraints on the local bulk flow in volumes centred on the Local Group. There is no detection of bulk flow as measured in any comoving sphere extending to the maximum redshift covered by the cluster sample. A blind search for bulk flows in this sample has an upper limit of 254 km s$^{-1}$ (95% confidence level) dominated by CMB confusion and instrumental noise, indicating that the Universe is largely homogeneous on Gpc scales. In this context, in conjunction with supernova observations, \Planck\ is able to rule out a large class of inhomogeneous void models as alternatives to dark energy or modified gravity. The \Planck\ constraints on peculiar velocities and bulk flows are thus consistent with the $Λ$CDM scenario.
△ Less
Submitted 30 March, 2014; v1 submitted 20 March, 2013;
originally announced March 2013.
-
Planck intermediate results. XII: Diffuse Galactic components in the Gould Belt System
Authors:
Planck Collaboration,
P. A. R. Ade,
N. Aghanim,
M. I. R. Alves,
M. Arnaud,
M. Ashdown,
F. Atrio-Barandela,
J. Aumont,
C. Baccigalupi,
A. Balbi,
A. J. Banday,
R. B. Barreiro,
J. G. Bartlett,
E. Battaner,
L. Bedini,
K. Benabed,
A. Benoît,
J. -P. Bernard,
M. Bersanelli,
A. Bonaldi,
J. R. Bond,
J. Borrill,
F. R. Bouchet,
F. Boulanger,
C. Burigana
, et al. (157 additional authors not shown)
Abstract:
We perform an analysis of the diffuse low-frequency Galactic components in the Southern part of the Gould Belt system (130^\circ\leq l\leq 230^\circ and -50^\circ\leq b\leq -10^\circ). Strong ultra-violet (UV) flux coming from the Gould Belt super-association is responsible for bright diffuse foregrounds that we observe from our position inside the system and that can help us improve our knowledge…
▽ More
We perform an analysis of the diffuse low-frequency Galactic components in the Southern part of the Gould Belt system (130^\circ\leq l\leq 230^\circ and -50^\circ\leq b\leq -10^\circ). Strong ultra-violet (UV) flux coming from the Gould Belt super-association is responsible for bright diffuse foregrounds that we observe from our position inside the system and that can help us improve our knowledge of the Galactic emission. Free-free emission and anomalous microwave emission (AME) are the dominant components at low frequencies (ν< 40 GHz), while synchrotron emission is very smooth and faint. We separate diffuse free-free emission and AME from synchrotron emission and thermal dust emission by using Planck data, complemented by ancillary data, using the "Correlated Component Analysis" (CCA) component separation method and we compare with the results of cross-correlation of foreground templates with the frequency maps. We estimate the electron temperature T_e from H$α$ and free-free emission using two methods (temperature-temperature plot and cross-correlation) and we obtain T_e ranging from 3100 to 5200 K, for an effective fraction of absorbing dust along the line of sight of 30% (f_d=0.3). We estimate the frequency spectrum of the diffuse AME and we recover a peak frequency (in flux density units) of 25.5 \pm 1.5 GHz. We verify the reliability of this result with realistic simulations that include the presence of biases in the spectral model for the AME and in the free-free template. By combining physical models for vibrational and rotational dust emission and adding the constraints from the thermal dust spectrum from Planck and IRAS we are able to get a good description of the frequency spectrum of the AME for plausible values of the local density and radiation field.
△ Less
Submitted 31 May, 2013; v1 submitted 24 January, 2013;
originally announced January 2013.
-
Planck intermediate results. VIII. Filaments between interacting clusters
Authors:
Planck Collaboration,
P. A. R. Ade,
N. Aghanim,
M. Arnaud,
M. Ashdown,
F. Atrio-Barandela,
J. Aumont,
C. Baccigalupi,
A. Balbi,
A. J. Banday,
R. B. Barreiro,
J. G. Bartlett,
E. Battaner,
K. Benabed,
A. Benoît,
J. -P. Bernard,
M. Bersanelli,
R. Bhatia,
I. Bikmaev,
H. Böhringer,
A. Bonaldi,
J. R. Bond,
J. Borrill,
F. R. Bouchet,
H. Bourdin
, et al. (186 additional authors not shown)
Abstract:
About half of the baryons of the Universe are expected to be in the form of filaments of hot and low density intergalactic medium. Most of these baryons remain undetected even by the most advanced X-ray observatories which are limited in sensitivity to the diffuse low density medium. The Planck satellite has provided hundreds of detections of the hot gas in clusters of galaxies via the thermal Sun…
▽ More
About half of the baryons of the Universe are expected to be in the form of filaments of hot and low density intergalactic medium. Most of these baryons remain undetected even by the most advanced X-ray observatories which are limited in sensitivity to the diffuse low density medium. The Planck satellite has provided hundreds of detections of the hot gas in clusters of galaxies via the thermal Sunyaev-Zel'dovich (tSZ) effect and is an ideal instrument for studying extended low density media through the tSZ effect. In this paper we use the Planck data to search for signatures of a fraction of these missing baryons between pairs of galaxy clusters. Cluster pairs are good candidates for searching for the hotter and denser phase of the intergalactic medium (which is more easily observed through the SZ effect). Using an X-ray catalogue of clusters and the Planck data, we select physical pairs of clusters as candidates. Using the Planck data we construct a local map of the tSZ effect centered on each pair of galaxy clusters. ROSAT data is used to construct X-ray maps of these pairs. After having modelled and subtracted the tSZ effect and X-ray emission for each cluster in the pair we study the residuals on both the SZ and X-ray maps. For the merging cluster pair A399-A401 we observe a significant tSZ effect signal in the intercluster region beyond the virial radii of the clusters. A joint X-ray SZ analysis allows us to constrain the temperature and density of this intercluster medium. We obtain a temperature of kT = 7.1 +- 0.9, keV (consistent with previous estimates) and a baryon density of (3.7 +- 0.2)x10^-4, cm^-3. The Planck satellite mission has provided the first SZ detection of the hot and diffuse intercluster gas.
△ Less
Submitted 19 November, 2012; v1 submitted 29 August, 2012;
originally announced August 2012.
-
Planck Intermediate Results. IX. Detection of the Galactic haze with Planck
Authors:
Planck Collaboration,
P. A. R. Ade,
N. Aghanim,
M. Arnaud,
M. Ashdown,
F. Atrio-Barandela,
J. Aumont,
C. Baccigalupi,
A. Balbi,
A. J. Banday,
R. B. Barreiro,
J. G. Bartlett,
E. Battaner,
K. Benabed,
A. Benoît,
J. -P. Bernard,
M. Bersanelli,
A. Bonaldi,
J. R. Bond,
J. Borrill,
F. R. Bouchet,
C. Burigana,
P. Cabella,
J. -F. Cardoso,
A. Catalano
, et al. (159 additional authors not shown)
Abstract:
Using precise full-sky observations from Planck, and applying several methods of component separation, we identify and characterize the emission from the Galactic "haze" at microwave wavelengths. The haze is a distinct component of diffuse Galactic emission, roughly centered on the Galactic centre, and extends to |b| ~35 deg in Galactic latitude and |l| ~15 deg in longitude. By combining the Planc…
▽ More
Using precise full-sky observations from Planck, and applying several methods of component separation, we identify and characterize the emission from the Galactic "haze" at microwave wavelengths. The haze is a distinct component of diffuse Galactic emission, roughly centered on the Galactic centre, and extends to |b| ~35 deg in Galactic latitude and |l| ~15 deg in longitude. By combining the Planck data with observations from the WMAP we are able to determine the spectrum of this emission to high accuracy, unhindered by the large systematic biases present in previous analyses. The derived spectrum is consistent with power-law emission with a spectral index of -2.55 +/- 0.05, thus excluding free-free emission as the source and instead favouring hard-spectrum synchrotron radiation from an electron population with a spectrum (number density per energy) dN/dE ~ E^-2.1. At Galactic latitudes |b|<30 deg, the microwave haze morphology is consistent with that of the Fermi gamma-ray "haze" or "bubbles," indicating that we have a multi-wavelength view of a distinct component of our Galaxy. Given both the very hard spectrum and the extended nature of the emission, it is highly unlikely that the haze electrons result from supernova shocks in the Galactic disk. Instead, a new mechanism for cosmic-ray acceleration in the centre of our Galaxy is implied.
△ Less
Submitted 27 August, 2012;
originally announced August 2012.
-
Planck intermediate results. X. Physics of the hot gas in the Coma cluster
Authors:
Planck Collaboration,
P. A. R. Ade,
N. Aghanim,
M. Arnaud,
M. Ashdown,
F. Atrio-Barandela,
J. Aumont,
C. Baccigalupi,
A. Balbi,
A. J. Banday,
R. B. Barreiro,
J. G. Bartlett,
E. Battaner,
K. Benabed,
A. Benoît,
J. -P. Bernard,
M. Bersanelli,
I. Bikmaev,
H. Böhringer,
A. Bonaldi,
J. R. Bond,
J. Borrill,
F. R. Bouchet,
H. Bourdin,
M. L. Brown
, et al. (185 additional authors not shown)
Abstract:
We present an analysis of Planck satellite data on the Coma Cluster observed via the Sunyaev-Zeldovich effect. Planck is able, for the first time, to detect SZ emission up to r ~ 3 X R_500. We test previously proposed models for the pressure distribution in clusters against the azimuthally averaged data. We find that the Arnaud et al. universal pressure profile does not fit Coma, and that their pr…
▽ More
We present an analysis of Planck satellite data on the Coma Cluster observed via the Sunyaev-Zeldovich effect. Planck is able, for the first time, to detect SZ emission up to r ~ 3 X R_500. We test previously proposed models for the pressure distribution in clusters against the azimuthally averaged data. We find that the Arnaud et al. universal pressure profile does not fit Coma, and that their pressure profile for merging systems provides a good fit of the data only at r<R_500: by r=2XR_500 it underestimates the observed y profile by a factor of ~2. This may indicate that at these larger radii either i) the cluster SZ emission is contaminated by unresolved SZ sources along the line of sight or ii) the pressure profile of Coma is higher at r>R_500 than the mean pressure profile predicted by the simulations. The Planck image shows significant local steepening of the y profile in two regions about half a degree to the west and to the south-east of the cluster centre. These features are consistent with the presence of shock fronts at these radii, and indeed the western feature was previously noticed in the ROSAT PSPC mosaic as well as in the radio. Using Planck y profiles extracted from corresponding sectors we find pressure jumps of 4.5+0.4-0.2 and 5.0+1.3-0.1 in the west and southeast, respectively. Assuming Rankine-Hugoniot pressure jump conditions, we deduce that the shock waves should propagate with Mach number M_w=2.03+0.09-0.04 and M_se=2.05+0.25-0.02 in the West and Southeast, respectively. Finally, we find that the y and radio-synchrotron signals are quasi-linearly correlated on Mpc scales with small intrinsic scatter. This implies either that the energy density of cosmic-ray electrons is relatively constant throughout the cluster, or that the magnetic fields fall off much more slowly with radius than previously thought.
△ Less
Submitted 19 December, 2012; v1 submitted 17 August, 2012;
originally announced August 2012.
-
Planck intermediate results. VII. Statistical properties of infrared and radio extragalactic sources from the Planck Early Release Compact Source Catalogue at frequencies between 100 and 857 GHz
Authors:
Planck Collaboration,
P. A. R. Ade,
N. Aghanim,
F. Argüeso,
M. Arnaud,
M. Ashdown,
F. Atrio-Barandela,
J. Aumont,
C. Baccigalupi,
A. Balbi,
A. J. Banday,
R. B. Barreiro,
E. Battaner,
K. Benabed,
A. Benoît,
J. -P. Bernard,
M. Bersanelli,
M. Bethermin,
R. Bhatia,
A. Bonaldi,
J. R. Bond,
J. Borrill,
F. R. Bouchet,
C. Burigana,
P. Cabella
, et al. (166 additional authors not shown)
Abstract:
(abridged for arXiv) We make use of the Planck all-sky survey to derive number counts and spectral indices of extragalactic sources -- infrared and radio sources -- from the Planck Early Catalogue (ERCSC) at 100 to 857GHz. Our sample contains, after the 80% completeness cut, between 122 and 452 and sources, with flux densities above 0.3 and 1.9Jy at 100 and 857GHz, over about 31 to 40% of the sky.…
▽ More
(abridged for arXiv) We make use of the Planck all-sky survey to derive number counts and spectral indices of extragalactic sources -- infrared and radio sources -- from the Planck Early Catalogue (ERCSC) at 100 to 857GHz. Our sample contains, after the 80% completeness cut, between 122 and 452 and sources, with flux densities above 0.3 and 1.9Jy at 100 and 857GHz, over about 31 to 40% of the sky. Using Planck HFI, all the sources have been classified as either dust-dominated or synchrotron-dominated on the basis of their spectral energy distributions (SED). Our sample is thus complete, flux-limited and color-selected to differentiate between the two populations. We find an approximately equal number of synchrotron and dusty sources between 217 and 353GHz; at 353GHz or higher (or 217GHz and lower) frequencies, the number is dominated by dusty (synchrotron) sources, as expected. For most of the sources, the spectral indices are also derived. We provide for the first time counts of bright sources from 353 to 857GHz and the contributions from dusty and synchrotron sources at all HFI frequencies in the key spectral range where these spectra are crossing. The observed counts are in the Euclidean regime. The number counts are compared to previously published data (earlier Planck, Herschel, BLAST, SCUBA, LABOCA, SPT, and ACT) and models taking into account both radio or infrared galaxies. We derive the multi-frequency Euclidean level and compare it to WMAP, Spitzer and IRAS results. The submillimetre number counts are not well reproduced by current evolution models of dusty galaxies, whereas the millimetre part appears reasonably well fitted by the most recent model for synchrotron-dominated sources. Finally we provide estimates of the local luminosity density of dusty galaxies, providing the first such measurements at 545 and 857GHz.
△ Less
Submitted 22 January, 2013; v1 submitted 19 July, 2012;
originally announced July 2012.
-
Planck Intermediate Results. V. Pressure profiles of galaxy clusters from the Sunyaev-Zeldovich effect
Authors:
Planck Collaboration,
P. A. R. Ade,
N. Aghanim,
M. Arnaud,
M. Ashdown,
F. Atrio-Barandela,
J. Aumont,
C. Baccigalupi,
A. Balbi,
A. J. Banday,
R. B. Barreiro,
J. G. Bartlett,
E. Battaner,
K. Benabed,
A. Benoit,
J. -P. Bernard,
M. Bersanelli,
R. Bhatia,
I. Bikmaev,
H. Boehringer,
A. Bonaldi,
J. R. Bond,
S. Borgani,
J. Borrill,
F. R. Bouchet
, et al. (192 additional authors not shown)
Abstract:
Taking advantage of the all-sky coverage and broad frequency range of the Planck satellite, we study the Sunyaev-Zeldovich (SZ) and pressure profiles of 62 nearby massive clusters detected at high significance in the 14-month nominal survey. Careful reconstruction of the SZ signal indicates that most clusters are individually detected at least out to R500. By stacking the radial profiles, we have…
▽ More
Taking advantage of the all-sky coverage and broad frequency range of the Planck satellite, we study the Sunyaev-Zeldovich (SZ) and pressure profiles of 62 nearby massive clusters detected at high significance in the 14-month nominal survey. Careful reconstruction of the SZ signal indicates that most clusters are individually detected at least out to R500. By stacking the radial profiles, we have statistically detected the radial SZ signal out to 3 x R500, i.e., at a density contrast of about 50-100, though the dispersion about the mean profile dominates the statistical errors across the whole radial range. Our measurement is fully consistent with previous Planck results on integrated SZ fluxes, further strengthening the agreement between SZ and X-ray measurements inside R500. Correcting for the effects of the Planck beam, we have calculated the corresponding pressure profiles. This new constraint from SZ measurements is consistent with the X-ray constraints from XMM-Newton in the region in which the profiles overlap (i.e., [0.1-1]R500), and is in fairly good agreement with theoretical predictions within the expected dispersion. At larger radii the average pressure profile is slightly flatter than most predictions from numerical simulations. Combining the SZ and X-ray observed profiles into a joint fit to a generalised pressure profile gives best-fit parameters [P0, c500, gamma, alpha, beta] = [6.41, 1.81, 0.31, 1.33, 4.13]. Using a reasonable hypothesis for the gas temperature in the cluster outskirts we reconstruct from our stacked pressure profile the gas mass fraction profile out to 3 x R500. Within the temperature driven uncertainties, our Planck constraints are compatible with the cosmic baryon fraction and expected gas fraction in halos.
△ Less
Submitted 8 November, 2012; v1 submitted 17 July, 2012;
originally announced July 2012.
-
Planck intermediate results. VI: The dynamical structure of PLCKG214.6+37.0, a Planck discovered triple system of galaxy clusters
Authors:
Planck Collaboration,
P. A. R. Ade,
N. Aghanim,
M. Arnaud,
M. Ashdown,
F. Atrio-Barandela,
J. Aumont,
C. Baccigalupi,
A. Balbi,
A. J. Banday,
R. B. Barreiro,
J. G. Bartlett,
E. Battaner,
K. Benabed,
A. Benoît,
J. -P. Bernard,
M. Bersanelli,
R. Bhatia,
H. Böhringer,
A. Bonaldi,
J. R. Bond,
J. Borrill,
F. R. Bouchet,
H. Bourdin,
C. Burigana
, et al. (178 additional authors not shown)
Abstract:
The survey of galaxy clusters performed by Planck through the Sunyaev-Zeldovich effect has already discovered many interesting objects, thanks to the whole coverage of the sky. One of the SZ candidates detected in the early months of the mission near to the signal to noise threshold, PLCKG214.6+37.0, was later revealed by XMM-Newton to be a triple system of galaxy clusters. We have further investi…
▽ More
The survey of galaxy clusters performed by Planck through the Sunyaev-Zeldovich effect has already discovered many interesting objects, thanks to the whole coverage of the sky. One of the SZ candidates detected in the early months of the mission near to the signal to noise threshold, PLCKG214.6+37.0, was later revealed by XMM-Newton to be a triple system of galaxy clusters. We have further investigated this puzzling system with a multi-wavelength approach and we present here the results from a deep XMM-Newton re-observation. The characterisation of the physical properties of the three components has allowed us to build a template model to extract the total SZ signal of this system with Planck data. We partly reconciled the discrepancy between the expected SZ signal from X-rays and the observed one, which are now consistent at less than 1.2 sigma. We measured the redshift of the three components with the iron lines in the X-ray spectrum, and confirmed that the three clumps are likely part of the same supercluster structure. The analysis of the dynamical state of the three components, as well as the absence of detectable excess X-ray emission, suggest that we are witnessing the formation of a massive cluster at an early phase of interaction.
△ Less
Submitted 17 July, 2012;
originally announced July 2012.