-
Measuring the CMB spectral distortions with COSMO: the multi-mode antenna system
Authors:
E. Manzan,
L. Albano,
C. Franceschet,
E. S. Battistelli,
P. de Bernardis,
M. Bersanelli,
F. Cacciotti,
A. Capponi,
F. Columbro,
G. Conenna,
G. Coppi,
A. Coppolecchia,
G. D'Alessandro,
G. De Gasperis,
M. De Petris,
M. Gervasi,
G. Isopi,
L. Lamagna,
A. Limonta,
E. Marchitelli,
S. Masi,
A. Mennella,
F. Montonati,
F. Nati,
A. Occhiuzzi
, et al. (7 additional authors not shown)
Abstract:
In this work, we present the design and manufacturing of the two multi-mode antenna arrays of the COSMO experiment and the preliminary beam pattern measurements of their fundamental mode compared with simulations.
COSMO is a cryogenic Martin-Puplett Fourier Transform Spectrometer that aims at measuring the isotropic y-type spectral distortion of the Cosmic Microwave Background from Antarctica, b…
▽ More
In this work, we present the design and manufacturing of the two multi-mode antenna arrays of the COSMO experiment and the preliminary beam pattern measurements of their fundamental mode compared with simulations.
COSMO is a cryogenic Martin-Puplett Fourier Transform Spectrometer that aims at measuring the isotropic y-type spectral distortion of the Cosmic Microwave Background from Antarctica, by performing differential measurements between the sky and an internal, cryogenic reference blackbody. To reduce the atmospheric contribution, a spinning wedge mirror performs fast sky-dips at varying elevations while fast, low-noise Kinetic Inductance detectors scan the interferogram.
Two arrays of antennas couple the radiation to the detectors. Each array consists of nine smooth-walled multi-mode feed-horns, operating in the $120-180$ GHz and $210-300$ GHz range, respectively. The multi-mode propagation helps increase the instrumental sensitivity without employing large focal planes with hundreds of detectors. The two arrays have a step-linear and a linear profile, respectively, and are obtained by superimposing aluminum plates made with CNC milling. The simulated multi-mode beam pattern has a $\sim 20^{\circ} - 26^{\circ}$ FWHM for the low-frequency array and $\sim 16^{\circ}$ FWHM for the high-frequency one. The side lobes are below $-15$ dB.
To characterize the antenna response, we measured the beam pattern of the fundamental mode using a Vector Network Analyzer, in far-field conditions inside an anechoic chamber at room temperature. We completed the measurements of the low-frequency array and found a good agreement with the simulations. We also identified a few non-idealities that we attribute to the measuring setup and will further investigate. A comprehensive multi-mode measurement will be feasible at cryogenic temperature once the full receiver is integrated.
△ Less
Submitted 13 June, 2024;
originally announced June 2024.
-
The LiteBIRD mission to explore cosmic inflation
Authors:
T. Ghigna,
A. Adler,
K. Aizawa,
H. Akamatsu,
R. Akizawa,
E. Allys,
A. Anand,
J. Aumont,
J. Austermann,
S. Azzoni,
C. Baccigalupi,
M. Ballardini,
A. J. Banday,
R. B. Barreiro,
N. Bartolo,
S. Basak,
A. Basyrov,
S. Beckman,
M. Bersanelli,
M. Bortolami,
F. Bouchet,
T. Brinckmann,
P. Campeti,
E. Carinos,
A. Carones
, et al. (134 additional authors not shown)
Abstract:
LiteBIRD, the next-generation cosmic microwave background (CMB) experiment, aims for a launch in Japan's fiscal year 2032, marking a major advancement in the exploration of primordial cosmology and fundamental physics. Orbiting the Sun-Earth Lagrangian point L2, this JAXA-led strategic L-class mission will conduct a comprehensive mapping of the CMB polarization across the entire sky. During its 3-…
▽ More
LiteBIRD, the next-generation cosmic microwave background (CMB) experiment, aims for a launch in Japan's fiscal year 2032, marking a major advancement in the exploration of primordial cosmology and fundamental physics. Orbiting the Sun-Earth Lagrangian point L2, this JAXA-led strategic L-class mission will conduct a comprehensive mapping of the CMB polarization across the entire sky. During its 3-year mission, LiteBIRD will employ three telescopes within 15 unique frequency bands (ranging from 34 through 448 GHz), targeting a sensitivity of 2.2\,$μ$K-arcmin and a resolution of 0.5$^\circ$ at 100\,GHz. Its primary goal is to measure the tensor-to-scalar ratio $r$ with an uncertainty $δr = 0.001$, including systematic errors and margin. If $r \geq 0.01$, LiteBIRD expects to achieve a $>5σ$ detection in the $\ell=$2-10 and $\ell=$11-200 ranges separately, providing crucial insight into the early Universe. We describe LiteBIRD's scientific objectives, the application of systems engineering to mission requirements, the anticipated scientific impact, and the operations and scanning strategies vital to minimizing systematic effects. We will also highlight LiteBIRD's synergies with concurrent CMB projects.
△ Less
Submitted 4 June, 2024;
originally announced June 2024.
-
Absolute reference for microwave polarization experiments -- The COSMOCal project and its proof of concept
Authors:
A. Ritacco,
L. Bizzarri,
S. Savorgnano,
F. Boulanger,
M. Pérault,
J. Treuttel,
P. Morfin,
A. Catalano,
D. Darson,
N. Ponthieu,
A. Feret,
B. Maffei,
A. Chahadih,
G. Pisano,
M. Zannoni,
F. Nati,
J. F. Macías-Pérez,
A. Monfardini,
M. Calvo,
M. Murgia,
P. Ortu,
T. Pisanu,
J. Aumont,
J. Errard,
S. Leclercq
, et al. (1 additional authors not shown)
Abstract:
The cosmic microwave background (CMB), a remnant of the Big Bang, provides unparalleled insights into the primordial universe, its energy content, and the origin of cosmic structures. The success of forthcoming terrestrial and space experiments hinges on meticulously calibrated data. Specifically, the ability to achieve an absolute calibration of the polarization angles with a precision of < 0.1 d…
▽ More
The cosmic microwave background (CMB), a remnant of the Big Bang, provides unparalleled insights into the primordial universe, its energy content, and the origin of cosmic structures. The success of forthcoming terrestrial and space experiments hinges on meticulously calibrated data. Specifically, the ability to achieve an absolute calibration of the polarization angles with a precision of < 0.1 deg is crucial to identify the signatures of primordial gravitational waves and cosmic birefringence within the CMB polarization. We introduce the COSMOCal project, designed to deploy a polarized source in space for calibrating microwave frequency observations. The project aims to integrate microwave polarization observations from small and large telescopes, ground-based and in space, into a unified scale, enhancing the effectiveness of each observatory and allowing robust combination of data. To demonstrate the feasibility and confirm the observational approach of our project, we developed a prototype instrument that operates in the atmospheric window centered at 260 GHz, specifically tailored for use with the NIKA2 camera at the IRAM 30 m telescope. We present the instrument components and their laboratory characterization. The results of tests performed with the fully assembled prototype using a KIDs-based instrument, similar concept of NIKA2, are also reported. This study paves the way for an observing campaign using the IRAM 30m telescope and contributes to the development of a space-based instrument.
△ Less
Submitted 20 May, 2024;
originally announced May 2024.
-
LiteBIRD Science Goals and Forecasts: Primordial Magnetic Fields
Authors:
D. Paoletti,
J. Rubino-Martin,
M. Shiraishi,
D. Molinari,
J. Chluba,
F. Finelli,
C. Baccigalupi,
J. Errard,
A. Gruppuso,
A. I. Lonappan,
A. Tartari,
E. Allys,
A. Anand,
J. Aumont,
M. Ballardini,
A. J. Banday,
R. B. Barreiro,
N. Bartolo,
M. Bersanelli,
M. Bortolami,
T. Brinckmann,
E. Calabrese,
P. Campeti,
A. Carones,
F. J. Casas
, et al. (75 additional authors not shown)
Abstract:
We present detailed forecasts for the constraints on primordial magnetic fields (PMFs) that will be obtained with the LiteBIRD satellite. The constraints are driven by the effects of PMFs on the CMB anisotropies: the gravitational effects of magnetically-induced perturbations; the effects on the thermal and ionization history of the Universe; the Faraday rotation imprint on the CMB polarization; a…
▽ More
We present detailed forecasts for the constraints on primordial magnetic fields (PMFs) that will be obtained with the LiteBIRD satellite. The constraints are driven by the effects of PMFs on the CMB anisotropies: the gravitational effects of magnetically-induced perturbations; the effects on the thermal and ionization history of the Universe; the Faraday rotation imprint on the CMB polarization; and the non-Gaussianities induced in polarization anisotropies. LiteBIRD represents a sensitive probe for PMFs and by exploiting all the physical effects, it will be able to improve the current limit coming from Planck. In particular, thanks to its accurate $B$-mode polarization measurement, LiteBIRD will improve the constraints on infrared configurations for the gravitational effect, giving $B_{\rm 1\,Mpc}^{n_{\rm B} =-2.9} < 0.8$ nG at 95% C.L., potentially opening the possibility to detect nanogauss fields with high significance. We also observe a significant improvement in the limits when marginalized over the spectral index, $B_{1\,{\rm Mpc}}^{\rm marg}< 2.2$ nG at 95% C.L. From the thermal history effect, which relies mainly on $E$-mode polarization data, we obtain a significant improvement for all PMF configurations, with the marginalized case, $\sqrt{\langle B^2\rangle}^{\rm marg}<0.50$ nG at 95% C.L. Faraday rotation constraints will take advantage of the wide frequency coverage of LiteBIRD and the high sensitivity in $B$ modes, improving the limits by orders of magnitude with respect to current results, $B_{1\,{\rm Mpc}}^{n_{\rm B} =-2.9} < 3.2$ nG at 95% C.L. Finally, non-Gaussianities of the $B$-mode polarization can probe PMFs at the level of 1 nG, again significantly improving the current bounds from Planck. Altogether our forecasts represent a broad collection of complementary probes, providing conservative limits on PMF characteristics that will be achieved with LiteBIRD.
△ Less
Submitted 25 March, 2024;
originally announced March 2024.
-
The BLAST Observatory: A Sensitivity Study for Far-IR Balloon-borne Polarimeters
Authors:
The BLAST Observatory Collaboration,
Gabriele Coppi,
Simon Dicker,
James E. Aguirre,
Jason E. Austermann,
James A. Beall,
Susan E. Clark,
Erin G. Cox,
Mark J. Devlin,
Laura M. Fissel,
Nicholas Galitzki,
Brandon S. Hensley,
Johannes Hubmayr,
Sergio Molinari,
Federico Nati,
Giles Novak,
Eugenio Schisano,
Juan D. Soler,
Carole E. Tucker,
Joel N. Ullom,
Anna Vaskuri,
Michael R. Vissers,
Jordan D. Wheeler,
Mario Zannoni
Abstract:
Sensitive wide-field observations of polarized thermal emission from interstellar dust grains will allow astronomers to address key outstanding questions about the life cycle of matter and energy driving the formation of stars and the evolution of galaxies. Stratospheric balloon-borne telescopes can map this polarized emission at far-infrared wavelengths near the peak of the dust thermal spectrum…
▽ More
Sensitive wide-field observations of polarized thermal emission from interstellar dust grains will allow astronomers to address key outstanding questions about the life cycle of matter and energy driving the formation of stars and the evolution of galaxies. Stratospheric balloon-borne telescopes can map this polarized emission at far-infrared wavelengths near the peak of the dust thermal spectrum - wavelengths that are inaccessible from the ground. In this paper we address the sensitivity achievable by a Super Pressure Balloon (SPB) polarimetry mission, using as an example the Balloon-borne Large Aperture Submillimeter Telescope (BLAST) Observatory. By launching from Wanaka, New Zealand, BLAST Observatory can obtain a 30-day flight with excellent sky coverage - overcoming limitations of past experiments that suffered from short flight duration and/or launch sites with poor coverage of nearby star-forming regions. This proposed polarimetry mission will map large regions of the sky at sub-arcminute resolution, with simultaneous observations at 175, 250, and 350 $μm$, using a total of 8274 microwave kinetic inductance detectors. Here, we describe the scientific motivation for the BLAST Observatory, the proposed implementation, and the forecasting methods used to predict its sensitivity. We also compare our forecasted experiment sensitivity with other facilities.
△ Less
Submitted 23 May, 2024; v1 submitted 25 January, 2024;
originally announced January 2024.
-
LSPE-STRIP on-sky calibration strategy using bright celestial sources
Authors:
R. T. Génova-Santos,
M. Bersanelli,
C. Franceschet,
M. Gervasi,
C. López-Caraballo,
L. Mandelli,
M. Maris,
A. Mennella,
J. A. Rubiño-Martín,
F. Villa,
M. Zannoni,
C. Baccigalupi,
B. Caccianiga,
L. Colombo,
F. Cuttaia,
F. Farsian,
G. Morgante,
S. Paradiso,
G. Polenta,
S. Ricciardi,
M. Sandri,
A. Taylor,
L. Terenzi,
M. Tomasi
Abstract:
In this paper we describe the global on-sky calibration strategy of the LSPE-Strip instrument. Strip is a microwave telescope operating in the Q- and W-bands (central frequencies of 43 and 95 GHz respectively) from the Observatorio del Teide in Tenerife, with the goal to observe and characterise the polarised Galactic foreground emission, and complement the observations of the polarisation of the…
▽ More
In this paper we describe the global on-sky calibration strategy of the LSPE-Strip instrument. Strip is a microwave telescope operating in the Q- and W-bands (central frequencies of 43 and 95 GHz respectively) from the Observatorio del Teide in Tenerife, with the goal to observe and characterise the polarised Galactic foreground emission, and complement the observations of the polarisation of the cosmic microwave background to be performed by the LSPE-SWIPE instrument and other similar experiments operating at higher frequencies to target the detection of the B-mode signal from the inflationary epoch of the Universe. Starting from basic assumptions on some of the instrument parameters (NET, 1/f noise knee frequency, beam properties, observing efficiency) we perform realistic simulations to study the level of accuracy that can be achieved through observations of bright celestial calibrators in the Strip footprint (sky fraction of 30 %) on the determination and characterisation of the main instrument parameters: global and relative gain factors (in intensity and in polarisation), polarisation direction, polarisation efficiency, leakage from intensity to polarisation, beams, window functions and pointing model.
△ Less
Submitted 16 January, 2024; v1 submitted 8 January, 2024;
originally announced January 2024.
-
Impact of beam far side-lobe knowledge in the presence of foregrounds for LiteBIRD
Authors:
C. Leloup,
G. Patanchon,
J. Errard,
C. Franceschet,
J. E. Gudmundsson,
S. Henrot-Versillé,
H. Imada,
H. Ishino,
T. Matsumura,
G. Puglisi,
W. Wang,
A. Adler,
J. Aumont,
R. Aurlien,
C. Baccigalupi,
M. Ballardini,
A. J. Banday,
R. B. Barreiro,
N. Bartolo,
A. Basyrov,
M. Bersanelli,
D. Blinov,
M. Bortolami,
T. Brinckmann,
P. Campeti
, et al. (86 additional authors not shown)
Abstract:
We present a study of the impact of an uncertainty in the beam far side-lobe knowledge on the measurement of the Cosmic Microwave Background $B$-mode signal at large scale. It is expected to be one of the main source of systematic effects in future CMB observations. Because it is crucial for all-sky survey missions to take into account the interplays between beam systematic effects and all the dat…
▽ More
We present a study of the impact of an uncertainty in the beam far side-lobe knowledge on the measurement of the Cosmic Microwave Background $B$-mode signal at large scale. It is expected to be one of the main source of systematic effects in future CMB observations. Because it is crucial for all-sky survey missions to take into account the interplays between beam systematic effects and all the data analysis steps, the primary goal of this paper is to provide the methodology to carry out the end-to-end study of their effect for a space-borne CMB polarization experiment, up to the cosmological results in the form of a bias $δr$ on the tensor-to-scalar ratio $r$. LiteBIRD is dedicated to target the measurement of CMB primordial $B$ modes by reaching a sensitivity of $σ\left( r \right) \leq 10^{-3}$ assuming $r=0$. As a demonstration of our framework, we derive the relationship between the knowledge of the beam far side-lobes and the tentatively allocated error budget under given assumptions on design, simulation and component separation method. We assume no mitigation of the far side-lobes effect at any stage of the analysis pipeline. We show that $δr$ is mostly due to the integrated fractional power difference between the estimated beams and the true beams in the far side-lobes region, with little dependence on the actual shape of the beams, for low enough $δr$. Under our set of assumptions, in particular considering the specific foreground cleaning method we used, we find that the integrated fractional power in the far side-lobes should be known at a level as tight as $\sim 10^{-4}$, to achieve the required limit on the bias $δr < 1.9 \times 10^{-5}$. The framework and tools developed for this study can be easily adapted to provide requirements under different design, data analysis frameworks and for other future space-borne experiments beyond LiteBIRD.
△ Less
Submitted 14 December, 2023;
originally announced December 2023.
-
LiteBIRD Science Goals and Forecasts: Improving Sensitivity to Inflationary Gravitational Waves with Multitracer Delensing
Authors:
T. Namikawa,
A. I. Lonappan,
C. Baccigalupi,
N. Bartolo,
D. Beck,
K. Benabed,
A. Challinor,
P. Diego-Palazuelos,
J. Errard,
S. Farrens,
A. Gruppuso,
N. Krachmalnicoff,
M. Migliaccio,
E. Martínez-González,
V. Pettorino,
G. Piccirilli,
M. Ruiz-Granda,
B. Sherwin,
J. Starck,
P. Vielva,
R. Akizawa,
A. Anand,
J. Aumont,
R. Aurlien,
S. Azzoni
, et al. (97 additional authors not shown)
Abstract:
We estimate the efficiency of mitigating the lensing $B$-mode polarization, the so-called delensing, for the $LiteBIRD$ experiment with multiple external data sets of lensing-mass tracers. The current best bound on the tensor-to-scalar ratio, $r$, is limited by lensing rather than Galactic foregrounds. Delensing will be a critical step to improve sensitivity to $r$ as measurements of $r$ become mo…
▽ More
We estimate the efficiency of mitigating the lensing $B$-mode polarization, the so-called delensing, for the $LiteBIRD$ experiment with multiple external data sets of lensing-mass tracers. The current best bound on the tensor-to-scalar ratio, $r$, is limited by lensing rather than Galactic foregrounds. Delensing will be a critical step to improve sensitivity to $r$ as measurements of $r$ become more and more limited by lensing. In this paper, we extend the analysis of the recent $LiteBIRD$ forecast paper to include multiple mass tracers, i.e., the CMB lensing maps from $LiteBIRD$ and CMB-S4-like experiment, cosmic infrared background, and galaxy number density from $Euclid$- and LSST-like survey. We find that multi-tracer delensing will further improve the constraint on $r$ by about $20\%$. In $LiteBIRD$, the residual Galactic foregrounds also significantly contribute to uncertainties of the $B$-modes, and delensing becomes more important if the residual foregrounds are further reduced by an improved component separation method.
△ Less
Submitted 8 December, 2023;
originally announced December 2023.
-
LiteBIRD Science Goals and Forecasts: A full-sky measurement of gravitational lensing of the CMB
Authors:
A. I. Lonappan,
T. Namikawa,
G. Piccirilli,
P. Diego-Palazuelos,
M. Ruiz-Granda,
M. Migliaccio,
C. Baccigalupi,
N. Bartolo,
D. Beck,
K. Benabed,
A. Challinor,
J. Errard,
S. Farrens,
A. Gruppuso,
N. Krachmalnicoff,
E. Martínez-González,
V. Pettorino,
B. Sherwin,
J. Starck,
P. Vielva,
R. Akizawa,
A. Anand,
J. Aumont,
R. Aurlien,
S. Azzoni
, et al. (97 additional authors not shown)
Abstract:
We explore the capability of measuring lensing signals in $LiteBIRD$ full-sky polarization maps. With a $30$ arcmin beam width and an impressively low polarization noise of $2.16\,μ$K-arcmin, $LiteBIRD$ will be able to measure the full-sky polarization of the cosmic microwave background (CMB) very precisely. This unique sensitivity also enables the reconstruction of a nearly full-sky lensing map u…
▽ More
We explore the capability of measuring lensing signals in $LiteBIRD$ full-sky polarization maps. With a $30$ arcmin beam width and an impressively low polarization noise of $2.16\,μ$K-arcmin, $LiteBIRD$ will be able to measure the full-sky polarization of the cosmic microwave background (CMB) very precisely. This unique sensitivity also enables the reconstruction of a nearly full-sky lensing map using only polarization data, even considering its limited capability to capture small-scale CMB anisotropies. In this paper, we investigate the ability to construct a full-sky lensing measurement in the presence of Galactic foregrounds, finding that several possible biases from Galactic foregrounds should be negligible after component separation by harmonic-space internal linear combination. We find that the signal-to-noise ratio of the lensing is approximately $40$ using only polarization data measured over $90\%$ of the sky. This achievement is comparable to $Planck$'s recent lensing measurement with both temperature and polarization and represents a four-fold improvement over $Planck$'s polarization-only lensing measurement. The $LiteBIRD$ lensing map will complement the $Planck$ lensing map and provide several opportunities for cross-correlation science, especially in the northern hemisphere.
△ Less
Submitted 8 December, 2023;
originally announced December 2023.
-
Polarization angle accuracy for future CMB experiments. The COSMOCal project and its prototype in the 1mm band
Authors:
A. Ritacco,
L. Bizzarri,
F. Boulanger,
M. Pérault,
J. Aumont,
F. Bouchet,
M. Calvo,
A. Catalano,
D. Darson,
F. X. Désert,
J. Errard,
A. Feret,
J. F. Macías-Pérez,
B. Maffei,
A. Monfardini,
L. Montier,
M. Murgia,
P. Morfin,
F. Nati,
G. Pisano,
N. Ponthieu,
J. L. Puget,
S. Savorgnano,
B. Segret,
K. Schuster
, et al. (2 additional authors not shown)
Abstract:
The Cosmic Microwave Background (CMB) radiation offers a unique window into the early Universe, facilitating precise examinations of fundamental cosmological theories. However, the quest for detecting B-modes in the CMB, predicted by theoretical models of inflation, faces substantial challenges in terms of calibration and foreground modeling. The COSMOCal (COsmic Survey of Millimeter wavelengths O…
▽ More
The Cosmic Microwave Background (CMB) radiation offers a unique window into the early Universe, facilitating precise examinations of fundamental cosmological theories. However, the quest for detecting B-modes in the CMB, predicted by theoretical models of inflation, faces substantial challenges in terms of calibration and foreground modeling. The COSMOCal (COsmic Survey of Millimeter wavelengths Objects for CMB experiments Calibration) project aims at enhancing the accuracy of the absolute calibration of the polarization angle $ψ$ of current and future CMB experiments. The concept includes the build of a very well known artificial source emitting in the frequency range [20-350] GHz that would act as an absolute calibrator for several polarization facilities on Earth. A feasibility study to place the artificial source in geostationary orbit, in the far field for all the telescopes on Earth, is ongoing. In the meanwhile ongoing hardware work is dedicated to build a prototype to test the technology, the precision and the stability of the polarization recovering in the 1 mm band (220-300 GHz). High-resolution experiments as the NIKA2 camera at the IRAM 30m telescope will be deployed for such use. Once carefully calibrated ($Δψ$ < 0.1 degrees) it will be used to observe astrophysical sources such as the Crab nebula, which is the best candidate in the sky for the absolute calibration of CMB experiments.
△ Less
Submitted 14 November, 2023;
originally announced November 2023.
-
Measuring the CMB primordial B-modes with Bolometric Interferometry
Authors:
A. Mennella,
P. Ade,
A. Almela,
G. Amico,
L. H. Arnaldi,
J. Aumont,
S. Banfi,
E. S. Battistelli,
B. Bélier,
L. Bergé,
J. -Ph. Bernard,
P. de Bernardis,
M. Bersanelli,
J. Bonaparte,
J. D. Bonilla,
E. Bunn,
D. Buzi,
F. Cacciotti,
D. Camilieri,
F. Cavaliere,
P. Chanial,
C. Chapron,
L. Colombo,
F. Columbro,
A. Coppolecchia
, et al. (89 additional authors not shown)
Abstract:
The Q&U Bolometric Interferometer for Cosmology (QUBIC) is the first bolometric interferometer designed to measure the primordial B-mode polarization of the Cosmic Microwave Background (CMB). Bolometric interferometry is a novel technique that combines the sensitivity of bolometric detectors with the control of systematic effects that is typical of interferometry, both key features in the quest fo…
▽ More
The Q&U Bolometric Interferometer for Cosmology (QUBIC) is the first bolometric interferometer designed to measure the primordial B-mode polarization of the Cosmic Microwave Background (CMB). Bolometric interferometry is a novel technique that combines the sensitivity of bolometric detectors with the control of systematic effects that is typical of interferometry, both key features in the quest for the faint signal of the primordial B-modes. A unique feature is the so-called "spectral imaging", i.e., the ability to recover the sky signal in several sub-bands within the physical band during data analysis. This feature provides an in-band spectral resolution of Δν/ν \sim 0.04 that is unattainable by a traditional imager. This is a key tool for controlling the Galactic foregrounds contamination. In this paper, we describe the principles of bolometric interferometry, the current status of the QUBIC experiment and future prospects.
△ Less
Submitted 5 November, 2023;
originally announced November 2023.
-
The advantage of Bolometric Interferometry for controlling Galactic foreground contamination in CMB primordial B-modes measurements
Authors:
E. Manzan,
M. Regnier,
J-Ch. Hamilton,
A. Mennella,
J. Errard,
L. Zapelli,
S. A. Torchinsky,
S. Paradiso,
E. Battistelli,
M. Bersanelli,
P. De Bernardis,
M. De Petris,
G. D'Alessandro,
M. Gervasi,
S. Masi,
M. Piat,
E. Rasztocky,
G. E Romero,
C. G. Scoccola,
M. Zannoni,
the QUBIC Collaboration
Abstract:
In the quest for the faint primordial B-mode polarization of the Cosmic Microwave Background, three are the key requirements for any present or future experiment: an utmost sensitivity, excellent control over instrumental systematic effects and over Galactic foreground contamination. Bolometric Interferometry (BI) is a novel technique that matches them all by combining the sensitivity of bolometri…
▽ More
In the quest for the faint primordial B-mode polarization of the Cosmic Microwave Background, three are the key requirements for any present or future experiment: an utmost sensitivity, excellent control over instrumental systematic effects and over Galactic foreground contamination. Bolometric Interferometry (BI) is a novel technique that matches them all by combining the sensitivity of bolometric detectors, the control of instrumental systematics from interferometry and a software-based, tunable, in-band spectral resolution due to its ability to perform band-splitting during data analysis (spectral imaging). In this paper, we investigate how the spectral imaging capability of BI can help in detecting residual contamination in case an over-simplified model of foreground emission is assumed in the analysis. To mimic this situation, we focus on the next generation of ground-based CMB experiment, CMB-S4, and compare its anticipated sensitivities, frequency and sky coverage with a hypothetical version of the same experiment based on BI, CMB-S4/BI, assuming that line-of-sight (LOS) frequency decorrelation is present in dust emission but is not accounted for during component separation. We show results from a Monte-Carlo analysis based on a parametric component separation method (FGBuster), highlighting how BI has the potential to diagnose the presence of foreground residuals in estimates of the tensor-to-scalar ratio $r$ in the case of unaccounted Galactic dust LOS frequency decorrelation.
△ Less
Submitted 3 November, 2023;
originally announced November 2023.
-
The Hera Radio Science Experiment at Didymos
Authors:
Edoardo Gramigna,
Riccardo Lasagni Manghi,
Marco Zannoni,
Paolo Tortora,
Ryan S. Park,
Giacomo Tommei,
Sébastien Le Maistre,
Patrick Michel,
Francesco Castellini,
Michael Kueppers
Abstract:
Hera represents the European Space Agency's inaugural planetary defense space mission and plays a pivotal role in the Asteroid Impact and Deflection Assessment international collaboration with NASA DART mission that performed the first asteroid deflection experiment using the kinetic impactor techniques. With the primary objective of conducting a detailed post-impact survey of the Didymos binary a…
▽ More
Hera represents the European Space Agency's inaugural planetary defense space mission and plays a pivotal role in the Asteroid Impact and Deflection Assessment international collaboration with NASA DART mission that performed the first asteroid deflection experiment using the kinetic impactor techniques. With the primary objective of conducting a detailed post-impact survey of the Didymos binary asteroid following the DART impact on its small moon called Dimorphos, Hera aims to comprehensively assess and characterize the feasibility of the kinetic impactor technique in asteroid deflection while conducting an in-depth investigation of the asteroid binary, including its physical and compositional properties as well as the effect of the impact on the surface and shape of Dimorphos. In this work, we describe the Hera radio science experiment, which will allow us to precisely estimate critical parameters, including the mass, which is required to determine the momentum enhancement resulting from the DART impact, mass distribution, rotational states, relative orbits, and dynamics of the asteroids Didymos and Dimorphos. Through a multi-arc covariance analysis, we present the achievable accuracy for these parameters, which consider the full expected asteroid phase and are based on ground radiometric, Hera optical images, and Hera to CubeSats InterSatellite Link radiometric measurements. The expected formal uncertainties for Didymos and Dimorphos GM are better than 0.01% and 0.1%, respectively, while their J2 formal uncertainties are better than 0.1% and 10%, respectively. [...]
△ Less
Submitted 30 May, 2024; v1 submitted 18 October, 2023;
originally announced October 2023.
-
Identifying frequency decorrelated dust residuals in B-mode maps by exploiting the spectral capability of bolometric interferometry
Authors:
M. Regnier,
E. Manzan,
J. -Ch Hamilton,
A. Mennella,
J. Errard,
L. Zapelli,
S. A. Torchinsky,
S. Paradiso,
E. Battistelli,
P. De Bernardis,
L. Colombo,
M. De Petris,
G. D'Alessandro,
B. Garcia,
M. Gervasi,
S. Masi,
L. Mousset,
N. Miron Granese,
C. O'Sullivan,
M. Piat,
E. Rasztocky,
G. E. Romero,
C. G. Scoccola,
M. Zannoni
Abstract:
Astrophysical polarized foregrounds represent the most critical challenge in Cosmic Microwave Background (CMB) B-mode experiments. Multi-frequency observations can be used to constrain astrophysical foregrounds to isolate the CMB contribution. However, recent observations indicate that foreground emission may be more complex than anticipated.
We investigate how the increased spectral resolution…
▽ More
Astrophysical polarized foregrounds represent the most critical challenge in Cosmic Microwave Background (CMB) B-mode experiments. Multi-frequency observations can be used to constrain astrophysical foregrounds to isolate the CMB contribution. However, recent observations indicate that foreground emission may be more complex than anticipated.
We investigate how the increased spectral resolution provided by band splitting in Bolometric Interferometry (BI) through a technique called spectral imaging can help control the foreground contamination in the case of unaccounted Galactic dust frequency decorrelation along the line-of-sight.
We focus on the next generation ground-based CMB experiment CMB-S4, and compare its anticipated sensitivities, frequency and sky coverage with a hypothetical version of the same experiment based on BI. We perform a Monte-Carlo analysis based on parametric component separation methods (FGBuster and Commander) and compute the likelihood on the recovered tensor-to-scalar ratio.
The main result of this analysis is that spectral imaging allows us to detect systematic uncertainties on r from frequency decorrelation when this effect is not accounted for in component separation. Conversely, an imager would detect a biased value of r and would be unable to spot the presence of a systematic effect. We find a similar result in the reconstruction of the dust spectral index, where we show that with BI we can measure more precisely the dust spectral index also when frequency decorrelation is present.
The in-band frequency resolution provided by BI allows us to identify dust LOS frequency decorrelation residuals where an imager of similar performance would fail. This opens the prospect to exploit this potential in the context of future CMB polarization experiments that will be challenged by complex foregrounds in their quest for B-modes detection.
△ Less
Submitted 21 February, 2024; v1 submitted 6 September, 2023;
originally announced September 2023.
-
Combining astrometry and JUICE -- Europa Clipper radio science to improve the ephemerides of the Galilean moons
Authors:
M. Fayolle,
A. Magnanini,
V. Lainey,
D. Dirkx,
M. Zannoni,
P. Tortora
Abstract:
The upcoming JUICE and Europa Clipper missions to Jupiter's Galilean satellites will provide radio science tracking measurements of both spacecraft. Such data are expected to significantly help estimating the moons' ephemerides and related dynamical parameters. However, the two missions will yield an imbalanced dataset, with no flybys planned at Io, condensed over less than six years. Current ephe…
▽ More
The upcoming JUICE and Europa Clipper missions to Jupiter's Galilean satellites will provide radio science tracking measurements of both spacecraft. Such data are expected to significantly help estimating the moons' ephemerides and related dynamical parameters. However, the two missions will yield an imbalanced dataset, with no flybys planned at Io, condensed over less than six years. Current ephemerides' solutions for the Galilean moons, on the other hand, rely on ground-based astrometry collected over more than a century which, while being less accurate, bring very valuable constraints on the long-term dynamics of the system. An improved solution for the Galilean satellites' complex dynamics could however be achieved by exploiting the existing synergies between these different observation sets. To quantify this, we merged simulated JUICE and Clipper radio science data with existing ground-based astrometric and radar observations, and performed the inversion. Our study specifically focusses on the resulting formal uncertainties in the moons' states, as well as Io's and Jupiter's tidal dissipation parameters. Adding astrometry stabilises the moons' state solution, especially beyond the missions' timelines. It furthermore reduces the uncertainties in $1/Q$ (inverse of the tidal quality factor) by a factor two to four for Jupiter, and about 30-35\% for Io. Among all data types, classical astrometry data prior to 1960 proved particularly beneficial. We also show that ground observations of Io add the most to the solution, confirming that ground observations can fill the lack of radio science data for this specific moon. We obtained a noticeable solution improvement when exploiting the complementarity between all different observation sets. These promising simulation results thus motivate future efforts to achieve a global solution from actual JUICE and Clipper radio science data.
△ Less
Submitted 29 July, 2023;
originally announced July 2023.
-
Momentum Transfer from the DART Mission Kinetic Impact on Asteroid Dimorphos
Authors:
Andrew F. Cheng,
Harrison F. Agrusa,
Brent W. Barbee,
Alex J. Meyer,
Tony L. Farnham,
Sabina D. Raducan,
Derek C. Richardson,
Elisabetta Dotto,
Angelo Zinzi,
Vincenzo Della Corte,
Thomas S. Statler,
Steven Chesley,
Shantanu P. Naidu,
Masatoshi Hirabayashi,
Jian-Yang Li,
Siegfried Eggl,
Olivier S. Barnouin,
Nancy L. Chabot,
Sidney Chocron,
Gareth S. Collins,
R. Terik Daly,
Thomas M. Davison,
Mallory E. DeCoster,
Carolyn M. Ernst,
Fabio Ferrari
, et al. (44 additional authors not shown)
Abstract:
The NASA Double Asteroid Redirection Test (DART) mission performed a kinetic impact on asteroid Dimorphos, the satellite of the binary asteroid (65803) Didymos, at 23:14 UTC on September 26, 2022 as a planetary defense test. DART was the first hypervelocity impact experiment on an asteroid at size and velocity scales relevant to planetary defense, intended to validate kinetic impact as a means of…
▽ More
The NASA Double Asteroid Redirection Test (DART) mission performed a kinetic impact on asteroid Dimorphos, the satellite of the binary asteroid (65803) Didymos, at 23:14 UTC on September 26, 2022 as a planetary defense test. DART was the first hypervelocity impact experiment on an asteroid at size and velocity scales relevant to planetary defense, intended to validate kinetic impact as a means of asteroid deflection. Here we report the first determination of the momentum transferred to an asteroid by kinetic impact. Based on the change in the binary orbit period, we find an instantaneous reduction in Dimorphos's along-track orbital velocity component of 2.70 +/- 0.10 mm/s, indicating enhanced momentum transfer due to recoil from ejecta streams produced by the impact. For a Dimorphos bulk density range of 1,500 to 3,300 kg/m$^3$, we find that the expected value of the momentum enhancement factor, $β$, ranges between 2.2 and 4.9, depending on the mass of Dimorphos. If Dimorphos and Didymos are assumed to have equal densities of 2,400 kg/m$^3$, $β$= 3.61 +0.19/-0.25 (1 $σ$). These $β$ values indicate that significantly more momentum was transferred to Dimorphos from the escaping impact ejecta than was incident with DART. Therefore, the DART kinetic impact was highly effective in deflecting the asteroid Dimorphos.
△ Less
Submitted 6 March, 2023;
originally announced March 2023.
-
Tensor-to-scalar ratio forecasts for extended LiteBIRD frequency configurations
Authors:
U. Fuskeland,
J. Aumont,
R. Aurlien,
C. Baccigalupi,
A. J. Banday,
H. K. Eriksen,
J. Errard,
R. T. Génova-Santos,
T. Hasebe,
J. Hubmayr,
H. Imada,
N. Krachmalnicoff,
L. Lamagna,
G. Pisano,
D. Poletti,
M. Remazeilles,
K. L. Thompson,
L. Vacher,
I. K. Wehus,
S. Azzoni,
M. Ballardini,
R. B. Barreiro,
N. Bartolo,
A. Basyrov,
D. Beck
, et al. (92 additional authors not shown)
Abstract:
LiteBIRD is a planned JAXA-led CMB B-mode satellite experiment aiming for launch in the late 2020s, with a primary goal of detecting the imprint of primordial inflationary gravitational waves. Its current baseline focal-plane configuration includes 15 frequency bands between 40 and 402 GHz, fulfilling the mission requirements to detect the amplitude of gravitational waves with the total uncertaint…
▽ More
LiteBIRD is a planned JAXA-led CMB B-mode satellite experiment aiming for launch in the late 2020s, with a primary goal of detecting the imprint of primordial inflationary gravitational waves. Its current baseline focal-plane configuration includes 15 frequency bands between 40 and 402 GHz, fulfilling the mission requirements to detect the amplitude of gravitational waves with the total uncertainty on the tensor-to-scalar ratio, $δr$, down to $δr<0.001$. A key aspect of this performance is accurate astrophysical component separation, and the ability to remove polarized thermal dust emission is particularly important. In this paper we note that the CMB frequency spectrum falls off nearly exponentially above 300 GHz relative to the thermal dust SED, and a relatively minor high frequency extension can therefore result in even lower uncertainties and better model reconstructions. Specifically, we compare the baseline design with five extended configurations, while varying the underlying dust modeling, in each of which the HFT (High-Frequency Telescope) frequency range is shifted logarithmically towards higher frequencies, with an upper cutoff ranging between 400 and 600 GHz. In each case, we measure the tensor-to-scalar ratio $r$ uncertainty and bias using both parametric and minimum-variance component-separation algorithms. When the thermal dust sky model includes a spatially varying spectral index and temperature, we find that the statistical uncertainty on $r$ after foreground cleaning may be reduced by as much as 30--50 % by extending the upper limit of the frequency range from 400 to 600 GHz, with most of the improvement already gained at 500 GHz. We also note that a broader frequency range leads to better ability to discriminate between models through higher $χ^2$ sensitivity. (abridged)
△ Less
Submitted 15 August, 2023; v1 submitted 10 February, 2023;
originally announced February 2023.
-
Activity distribution of comet 67P/Churyumov-Gerasimenko from combined measurements of non-gravitational forces and torques
Authors:
Nicholas Attree,
Laurent Jorda,
Olivier Groussin,
Jessica Agarwal,
Riccardo Lasagni Manghi,
Paolo Tortora,
Marco Zannoni,
Raphael Marschall
Abstract:
Aims. Understanding the activity is vital for deciphering the structure, formation, and evolution of comets. We investigate models of cometary activity by comparing them to the dynamics of 67P/Churyumov-Gerasimenko. Methods. We matched simple thermal models of water activity to the combined Rosetta datasets by fitting to the total outgassing rate and four components of the outgassing induced non-g…
▽ More
Aims. Understanding the activity is vital for deciphering the structure, formation, and evolution of comets. We investigate models of cometary activity by comparing them to the dynamics of 67P/Churyumov-Gerasimenko. Methods. We matched simple thermal models of water activity to the combined Rosetta datasets by fitting to the total outgassing rate and four components of the outgassing induced non-gravitational force and torque, with a final manual adjustment of the model parameters to additionally match the other two torque components. We parametrised the thermal model in terms of a distribution of relative activity over the surface of the comet, and attempted to link this to different terrain types. We also tested a more advanced thermal model based on a pebble structure. Results. We confirm a hemispherical dichotomy and non-linear water outgassing response to insolation. The southern hemisphere of the comet and consolidated terrain show enhanced activity relative to the northern hemisphere and dust-covered, unconsolidated terrain types, especially at perihelion. We further find that the non-gravitational torque is especially sensitive to the activity distribution, and to fit the pole-axis orientation in particular, activity must be concentrated (in excess of the already high activity in the southern hemisphere and consolidated terrain) around the south pole and on the body and neck of the comet over its head. This is the case for both the simple thermal model and the pebble-based model. Overall, our results show that water activity cannot be matched by a simple model of sublimating surface ice driven by the insolation alone, regardless of the surface distribution, and that both local spatial and temporal variations are needed to fit the data.
△ Less
Submitted 12 January, 2023;
originally announced January 2023.
-
Status of QUBIC, the Q&U Bolometer for Cosmology
Authors:
L. Mousset,
P. Ade,
A. Almela,
G. Amico,
L. H. Arnaldi,
J. Aumont,
S. Banfi,
E. S. Battistelli,
B. Bélier,
L. Bergé,
J. -Ph. Bernard,
P. de Bernardis,
M. Bersanelli,
J. Bonaparte,
J. D. Bonilla,
E. Bunn,
D. Buzi,
D. Camilieri,
F. Cavaliere,
P. Chanial,
C. Chapron,
S. Colombo,
F. Columbro,
A. Coppolecchia,
B. Costanza
, et al. (86 additional authors not shown)
Abstract:
The Q&U Bolometric Interferometer for Cosmology (QUBIC) is a novel kind of polarimeter optimized for the measurement of the B-mode polarization of the Cosmic Microwave Back-ground (CMB), which is one of the major challenges of observational cosmology. The signal is expected to be of the order of a few tens of nK, prone to instrumental systematic effects and polluted by various astrophysical foregr…
▽ More
The Q&U Bolometric Interferometer for Cosmology (QUBIC) is a novel kind of polarimeter optimized for the measurement of the B-mode polarization of the Cosmic Microwave Back-ground (CMB), which is one of the major challenges of observational cosmology. The signal is expected to be of the order of a few tens of nK, prone to instrumental systematic effects and polluted by various astrophysical foregrounds which can only be controlled through multichroic observations. QUBIC is designed to address these observational issues with a novel approach that combines the advantages of interferometry in terms of control of instrumental systematics with those of bolometric detectors in terms of wide-band, background-limited sensitivity.
△ Less
Submitted 6 October, 2022;
originally announced October 2022.
-
PROTOCALC: an artificial calibrator source for CMB telescopes
Authors:
Gabriele Coppi,
Giulia Conenna,
Sofia Savorgnano,
Felipe Carrero,
Rolando Dünner-Planella,
Nicholas Galitzki,
Federico Nati,
Mario Zannoni
Abstract:
Cosmic Microwave Background experiments need to measure polarization properties of the incoming radiation very accurately to achieve their scientific goals. As a result of that, it is necessary to properly characterize these instruments. However, there are not natural sources that can be used for this purpose. For this reason, we developed the PROTOtype CALibrator for Cosmology, PROTOCALC, which i…
▽ More
Cosmic Microwave Background experiments need to measure polarization properties of the incoming radiation very accurately to achieve their scientific goals. As a result of that, it is necessary to properly characterize these instruments. However, there are not natural sources that can be used for this purpose. For this reason, we developed the PROTOtype CALibrator for Cosmology, PROTOCALC, which is a calibrator source designed for the 90GHz band of these telescopes. This source is purely polarized and the direction of the polarization vector is known with an accuracy better than 0.1deg. This source flew for the first time in May 2022 showing promising result
△ Less
Submitted 15 July, 2022;
originally announced July 2022.
-
Probing Cosmic Inflation with the LiteBIRD Cosmic Microwave Background Polarization Survey
Authors:
LiteBIRD Collaboration,
E. Allys,
K. Arnold,
J. Aumont,
R. Aurlien,
S. Azzoni,
C. Baccigalupi,
A. J. Banday,
R. Banerji,
R. B. Barreiro,
N. Bartolo,
L. Bautista,
D. Beck,
S. Beckman,
M. Bersanelli,
F. Boulanger,
M. Brilenkov,
M. Bucher,
E. Calabrese,
P. Campeti,
A. Carones,
F. J. Casas,
A. Catalano,
V. Chan,
K. Cheung
, et al. (166 additional authors not shown)
Abstract:
LiteBIRD, the Lite (Light) satellite for the study of B-mode polarization and Inflation from cosmic background Radiation Detection, is a space mission for primordial cosmology and fundamental physics. The Japan Aerospace Exploration Agency (JAXA) selected LiteBIRD in May 2019 as a strategic large-class (L-class) mission, with an expected launch in the late 2020s using JAXA's H3 rocket. LiteBIRD is…
▽ More
LiteBIRD, the Lite (Light) satellite for the study of B-mode polarization and Inflation from cosmic background Radiation Detection, is a space mission for primordial cosmology and fundamental physics. The Japan Aerospace Exploration Agency (JAXA) selected LiteBIRD in May 2019 as a strategic large-class (L-class) mission, with an expected launch in the late 2020s using JAXA's H3 rocket. LiteBIRD is planned to orbit the Sun-Earth Lagrangian point L2, where it will map the cosmic microwave background (CMB) polarization over the entire sky for three years, with three telescopes in 15 frequency bands between 34 and 448 GHz, to achieve an unprecedented total sensitivity of 2.2$μ$K-arcmin, with a typical angular resolution of 0.5$^\circ$ at 100 GHz. The primary scientific objective of LiteBIRD is to search for the signal from cosmic inflation, either making a discovery or ruling out well-motivated inflationary models. The measurements of LiteBIRD will also provide us with insight into the quantum nature of gravity and other new physics beyond the standard models of particle physics and cosmology. We provide an overview of the LiteBIRD project, including scientific objectives, mission and system requirements, operation concept, spacecraft and payload module design, expected scientific outcomes, potential design extensions and synergies with other projects.
△ Less
Submitted 27 March, 2023; v1 submitted 6 February, 2022;
originally announced February 2022.
-
Polarization angle requirements for CMB B-mode experiments. Application to the LiteBIRD satellite
Authors:
P. Vielva,
E. Martínez-González,
F. J. Casas,
T. Matsumura,
S. Henrot-Versillé,
E. Komatsu,
J. Aumont,
R. Aurlien,
C. Baccigalupi,
A. J. Banday,
R. B. Barreiro,
N. Bartolo,
E. Calabrese,
K. Cheung,
F. Columbro,
A. Coppolecchia,
P. de Bernardis,
T. de Haan,
E. de la Hoz,
M. De Petris,
S. Della Torre,
P. Diego-Palazuelos,
H. K. Eriksen,
J. Errard,
F. Finelli
, et al. (46 additional authors not shown)
Abstract:
A methodology to provide the polarization angle requirements for different sets of detectors, at a given frequency of a CMB polarization experiment, is presented. The uncertainties in the polarization angle of each detector set are related to a given bias on the tensor-to-scalar ratio $r$ parameter. The approach is grounded in using a linear combination of the detector sets to obtain the CMB polar…
▽ More
A methodology to provide the polarization angle requirements for different sets of detectors, at a given frequency of a CMB polarization experiment, is presented. The uncertainties in the polarization angle of each detector set are related to a given bias on the tensor-to-scalar ratio $r$ parameter. The approach is grounded in using a linear combination of the detector sets to obtain the CMB polarization signal. In addition, assuming that the uncertainties on the polarization angle are in the small angle limit (lower than a few degrees), it is possible to derive analytic expressions to establish the requirements. The methodology also accounts for possible correlations among detectors, that may originate from the optics, wafers, etc. The approach is applied to the LiteBIRD space mission. We show that, for the most restrictive case (i.e., full correlation of the polarization angle systematics among detector sets), the requirements on the polarization angle uncertainties are of around 1 arcmin at the most sensitive frequency bands (i.e., $\approx 150$ GHz) and of few tens of arcmin at the lowest (i.e., $\approx 40$ GHz) and highest (i.e., $\approx 400$ GHz) observational bands. Conversely, for the least restrictive case (i.e., no correlation of the polarization angle systematics among detector sets), the requirements are $\approx 5$ times less restrictive than for the previous scenario. At the global and the telescope levels, polarization angle knowledge of a few arcmins is sufficient for correlated global systematic errors and can be relaxed by a factor of two for fully uncorrelated errors in detector polarization angle. The reported uncertainty levels are needed in order to have the bias on $r$ due to systematics below the limit established by the LiteBIRD collaboration.
△ Less
Submitted 18 April, 2022; v1 submitted 2 February, 2022;
originally announced February 2022.
-
In-flight polarization angle calibration for LiteBIRD: blind challenge and cosmological implications
Authors:
Nicoletta Krachmalnicoff,
Tomotake Matsumura,
Elena de la Hoz,
Soumen Basak,
Alessandro Gruppuso,
Yuto Minami,
Carlo Baccigalupi,
Eiichiro Komatsu,
Enrique Martínez-González,
Patricio Vielva,
Jonathan Aumont,
Ragnhild Aurlien,
Susanna Azzoni,
Anthony J. Banday,
Rita B. Barreiro,
Nicola Bartolo,
Marco Bersanelli,
Erminia Calabrese,
Alessandro Carones,
Francisco J. Casas,
Kolen Cheung,
Yuji Chinone,
Fabio Columbro,
Paolo de Bernardis,
Patricia Diego-Palazuelos
, et al. (45 additional authors not shown)
Abstract:
We present a demonstration of the in-flight polarization angle calibration for the JAXA/ISAS second strategic large class mission, LiteBIRD, and estimate its impact on the measurement of the tensor-to-scalar ratio parameter, r, using simulated data. We generate a set of simulated sky maps with CMB and polarized foreground emission, and inject instrumental noise and polarization angle offsets to th…
▽ More
We present a demonstration of the in-flight polarization angle calibration for the JAXA/ISAS second strategic large class mission, LiteBIRD, and estimate its impact on the measurement of the tensor-to-scalar ratio parameter, r, using simulated data. We generate a set of simulated sky maps with CMB and polarized foreground emission, and inject instrumental noise and polarization angle offsets to the 22 (partially overlapping) LiteBIRD frequency channels. Our in-flight angle calibration relies on nulling the EB cross correlation of the polarized signal in each channel. This calibration step has been carried out by two independent groups with a blind analysis, allowing an accuracy of the order of a few arc-minutes to be reached on the estimate of the angle offsets. Both the corrected and uncorrected multi-frequency maps are propagated through the foreground cleaning step, with the goal of computing clean CMB maps. We employ two component separation algorithms, the Bayesian-Separation of Components and Residuals Estimate Tool (B-SeCRET), and the Needlet Internal Linear Combination (NILC). We find that the recovered CMB maps obtained with algorithms that do not make any assumptions about the foreground properties, such as NILC, are only mildly affected by the angle miscalibration. However, polarization angle offsets strongly bias results obtained with the parametric fitting method. Once the miscalibration angles are corrected by EB nulling prior to the component separation, both component separation algorithms result in an unbiased estimation of the r parameter. While this work is motivated by the conceptual design study for LiteBIRD, its framework can be broadly applied to any CMB polarization experiment. In particular, the combination of simulation plus blind analysis provides a robust forecast by taking into account not only detector sensitivity but also systematic effects.
△ Less
Submitted 21 January, 2022; v1 submitted 17 November, 2021;
originally announced November 2021.
-
Total power horn-coupled 150 GHz LEKID array for space applications
Authors:
A. Paiella,
A. Coppolecchia,
P. de Bernardis,
S. Masi,
A. Cruciani,
L. Lamagna,
G. Pettinari,
F. Piacentini,
M. Bersanelli,
F. Cavaliere,
C. Franceschet,
M. Gervasi,
A. Limonta,
S. Mandelli,
E. Manzan,
A. Mennella,
A. Passerini,
E. Tommasi,
A. Volpe,
M. Zannoni
Abstract:
We have developed two arrays of lumped element kinetic inductance detectors working in the D-band, and optimised for the low radiative background conditions of a satellite mission aiming at precision measurements of the Cosmic Microwave Background (CMB). The first detector array is sensitive to the total power of the incoming radiation to which is coupled via single-mode waveguides and corrugated…
▽ More
We have developed two arrays of lumped element kinetic inductance detectors working in the D-band, and optimised for the low radiative background conditions of a satellite mission aiming at precision measurements of the Cosmic Microwave Background (CMB). The first detector array is sensitive to the total power of the incoming radiation to which is coupled via single-mode waveguides and corrugated feed-horns, while the second is sensitive to the polarisation of the radiation thanks to orthomode transducers. Here, we focus on the total power detector array, which is suitable, for instance, for precision measurements of unpolarised spectral distortions of the CMB, where detecting both polarisations provides a sensitivity advantage. We describe the optimisation of the array design, fabrication and packaging, the dark and optical characterisation, and the performance of the black-body calibrator used for the optical tests. We show that almost all the detectors of the array are photon-noise limited under the radiative background of a 3.6 K black-body. This result, combined with the weak sensitivity to cosmic rays hits demonstrated with the OLIMPO flight, validates the idea of using lumped elements kinetic inductance detectors for precision, space-based CMB missions.
△ Less
Submitted 10 June, 2022; v1 submitted 16 November, 2021;
originally announced November 2021.
-
The COSmic Monopole Observer (COSMO)
Authors:
S. Masi,
E. Battistelli,
P. de Bernardis,
A. Coppolecchia,
F. Columbro,
G. D'Alessandro,
M. De Petris,
L. Lamagna,
E. Marchitelli,
L. Mele,
A. Paiella,
F. Piacentini,
G. Pisano,
M. Bersanelli,
C. Franceschet,
E. Manzan,
D. Mennella,
S. Realini,
S. Cibella,
F. Martini,
G. Pettinari,
G. Coppi,
M. Gervasi,
A. Limonta,
M. Zannoni
, et al. (2 additional authors not shown)
Abstract:
The COSmic Monopole Observer (COSMO) is an experiment to measure low-level spectral distortions in the isotropic component of the Cosmic Microwave Background (CMB). Deviations from a pure blackbody spectrum are expected at low level ($<$ 1 ppm) due to several astrophysical and cosmological phenomena, and promise to provide important independent information on the early and late phases of the unive…
▽ More
The COSmic Monopole Observer (COSMO) is an experiment to measure low-level spectral distortions in the isotropic component of the Cosmic Microwave Background (CMB). Deviations from a pure blackbody spectrum are expected at low level ($<$ 1 ppm) due to several astrophysical and cosmological phenomena, and promise to provide important independent information on the early and late phases of the universe. They have not been detected yet, due to the extreme accuracy required, the best upper limits being still those from the COBE-FIRAS mission. COSMO is based on a cryogenic differential Fourier Transform Spectrometer, measuring the spectral brightness difference between the sky and an accurate cryogenic blackbody. The first implementation of COSMO, funded by the Italian PRIN and PNRA programs, will operate from the Concordia station at Dome-C, in Antarctica, and will take advantage of a fast sky-dip technique to get rid of atmospheric emission and its fluctuations, separating them from the monopole component of the sky brightness. Here we describe the instrument design, its capabilities, the current status. We also discuss its subsequent implementation in a balloon-flight, which has been studied within the COSMOS program of the Italian Space Agency.
△ Less
Submitted 23 October, 2021;
originally announced October 2021.
-
Determination of uncertainty profiles in neutral atmospheric properties measured by radio occultation experiments
Authors:
Adrien Bourgoin,
Edoardo Gramigna,
Marco Zannoni,
Luis Gomez Casajus,
Paolo Tortora
Abstract:
Radio occultations are commonly used to assess remotely the thermodynamic properties of planets or satellites' atmospheres within the solar system. The data processing usually involves the so-called Abel inversion method or the numerical ray-tracing technique. Both these approaches are now well established, however, they do not allow to easily determine the uncertainty profiles in the atmospheric…
▽ More
Radio occultations are commonly used to assess remotely the thermodynamic properties of planets or satellites' atmospheres within the solar system. The data processing usually involves the so-called Abel inversion method or the numerical ray-tracing technique. Both these approaches are now well established, however, they do not allow to easily determine the uncertainty profiles in the atmospheric properties, and this makes the results difficult to interpret statistically. Recently, a purely analytical approach based on the time transfer functions formalism was proposed for modeling radio occultation data. Using this formulation, we derive uncertainty relationships between the frequency shift and the thermodynamic properties of the neutral atmosphere such as the temperature, pressure, and neutral number density. These expressions are important for interpreting previous results from past radio occultation experiments. They are especially relevant for deriving the system requirements for future missions in a rigorous manner and consistently with the scientific requirements about the atmospheric properties retrieval.
△ Less
Submitted 19 August, 2022; v1 submitted 18 October, 2021;
originally announced October 2021.
-
The LSPE-Strip beams
Authors:
S. Realini,
C. Franceschet,
F. Villa,
M. Sandri,
G. Addamo,
P. Alonso-Arias,
M. Bersanelli,
F. Cuttaia,
M. Jones,
M. Maris,
F. P. Mena,
A. Mennella,
R. Molina,
G. Morgante,
M. Tomasi,
M. Zannoni
Abstract:
In this paper we describe the design and characterization of the optical system of LSPE/Strip, a coherent polarimeter array that will observe the microwave sky from the Teide Observatory in Tenerife in two frequency bands centred at 43 and 95 GHz through a dual-reflector crossed-Dragone telescope of 1.5 m aperture. In general, optical systems composed by a telescopefeed array assembly have non-ide…
▽ More
In this paper we describe the design and characterization of the optical system of LSPE/Strip, a coherent polarimeter array that will observe the microwave sky from the Teide Observatory in Tenerife in two frequency bands centred at 43 and 95 GHz through a dual-reflector crossed-Dragone telescope of 1.5 m aperture. In general, optical systems composed by a telescopefeed array assembly have non-idealities that might limit their ability to perform high-precision measurements. It is thus necessary to understand, characterize and properly control these systematic effects. For this reason, we performed electromagnetic simulations to characterize angular resolution, sidelobes, main beam symmetry, polarization purity and feedhorns orientation. The results presented in this paper will be an essential input for further optical studies and for the LSPE/Strip data analysis. Ultimately, they will be used to assess the impact of optical systematic effects on the scientific results.
△ Less
Submitted 26 January, 2022; v1 submitted 3 September, 2021;
originally announced September 2021.
-
The LSPE-Strip feed horn array
Authors:
C. Franceschet,
F. Del Torto,
F. Villa,
S. Realini,
R. Bongiolatti,
O. A. Peverini,
F. Pezzotta,
D. M. Viganó,
G. Addamo,
M. Bersanelli,
F. Cavaliere,
F. Cuttaia,
M. Gervasi,
A. Mennella,
G. Morgante,
A. C. Taylor,
G. Virone,
M. Zannoni
Abstract:
In this paper we discuss the design, manufacturing and characterization of the feed horn array of the Strip instrument of the Large Scale Polarization Explorer (LSPE) experiment. Strip is a microwave telescope, operating in the Q- and W-band, for the observation of the polarized emissions from the sky in a large fraction (about 37%) of the Northern hemisphere with subdegree angular resolution. The…
▽ More
In this paper we discuss the design, manufacturing and characterization of the feed horn array of the Strip instrument of the Large Scale Polarization Explorer (LSPE) experiment. Strip is a microwave telescope, operating in the Q- and W-band, for the observation of the polarized emissions from the sky in a large fraction (about 37%) of the Northern hemisphere with subdegree angular resolution. The Strip focal plane is populated by forty-nine Q-band and six W-band corrugated horns, each feeding a cryogenically cooled polarimeter for the detection of the Stokes $Q$ and $U$ components of the polarized signal from the sky. The Q-band channel is designed to accurately monitor Galactic polarized synchrotron emission, while the combination of Q- and W-band will allow the study of atmospheric effects at the observation site, the Observatorio del Teide, in Tenerife. In this paper we focus on the development of the Strip corrugated feed horns, including design requirements, engineering and manufacturing, as well as detailed characterization and performance verification.
△ Less
Submitted 1 December, 2021; v1 submitted 29 July, 2021;
originally announced July 2021.
-
The Simons Observatory: the Large Aperture Telescope (LAT)
Authors:
Zhilei Xu,
Shunsuke Adachi,
Peter Ade,
J. A. Beall,
Tanay Bhandarkar,
J. Richard Bond,
Grace E. Chesmore,
Yuji Chinone,
Steve K. Choi,
Jake A. Connors,
Gabriele Coppi,
Nicholas F. Cothard,
Kevin D. Crowley,
Mark Devlin,
Simon Dicker,
Bradley Dober,
Shannon M. Duff,
Nicholas Galitzki,
Patricio A. Gallardo,
Joseph E. Golec,
Jon E. Gudmundsson,
Saianeesh K. Haridas,
Kathleen Harrington,
Carlos Hervias-Caimapo,
Shuay-Pwu Patty Ho
, et al. (35 additional authors not shown)
Abstract:
The Simons Observatory (SO) is a Cosmic Microwave Background (CMB) experiment to observe the microwave sky in six frequency bands from 30GHz to 290GHz. The Observatory -- at $\sim$5200m altitude -- comprises three Small Aperture Telescopes (SATs) and one Large Aperture Telescope (LAT) at the Atacama Desert, Chile. This research note describes the design and current status of the LAT along with its…
▽ More
The Simons Observatory (SO) is a Cosmic Microwave Background (CMB) experiment to observe the microwave sky in six frequency bands from 30GHz to 290GHz. The Observatory -- at $\sim$5200m altitude -- comprises three Small Aperture Telescopes (SATs) and one Large Aperture Telescope (LAT) at the Atacama Desert, Chile. This research note describes the design and current status of the LAT along with its future timeline.
△ Less
Submitted 29 April, 2021; v1 submitted 19 April, 2021;
originally announced April 2021.
-
The Simons Observatory Large Aperture Telescope Receiver
Authors:
Ningfeng Zhu,
Tanay Bhandarkar,
Gabriele Coppi,
Anna M. Kofman,
John L. Orlowski-Scherer,
Zhilei Xu,
Shunsuke Adachi,
Peter Ade,
Simone Aiola,
Jason Austermann,
Andrew O. Bazarko,
James A. Beall,
Sanah Bhimani,
J. Richard Bond,
Grace E. Chesmore,
Steve K. Choi,
Jake Connors,
Nicholas F. Cothard,
Mark Devlin,
Simon Dicker,
Bradley Dober,
Cody J. Duell,
Shannon M. Duff,
Rolando Dünner,
Giulio Fabbian
, et al. (46 additional authors not shown)
Abstract:
The Simons Observatory (SO) Large Aperture Telescope Receiver (LATR) will be coupled to the Large Aperture Telescope located at an elevation of 5,200 m on Cerro Toco in Chile. The resulting instrument will produce arcminute-resolution millimeter-wave maps of half the sky with unprecedented precision. The LATR is the largest cryogenic millimeter-wave camera built to date with a diameter of 2.4 m an…
▽ More
The Simons Observatory (SO) Large Aperture Telescope Receiver (LATR) will be coupled to the Large Aperture Telescope located at an elevation of 5,200 m on Cerro Toco in Chile. The resulting instrument will produce arcminute-resolution millimeter-wave maps of half the sky with unprecedented precision. The LATR is the largest cryogenic millimeter-wave camera built to date with a diameter of 2.4 m and a length of 2.6 m. It cools 1200 kg of material to 4 K and 200 kg to 100 mk, the operating temperature of the bolometric detectors with bands centered around 27, 39, 93, 145, 225, and 280 GHz. Ultimately, the LATR will accommodate 13 40 cm diameter optics tubes, each with three detector wafers and a total of 62,000 detectors. The LATR design must simultaneously maintain the optical alignment of the system, control stray light, provide cryogenic isolation, limit thermal gradients, and minimize the time to cool the system from room temperature to 100 mK. The interplay between these competing factors poses unique challenges. We discuss the trade studies involved with the design, the final optimization, the construction, and ultimate performance of the system.
△ Less
Submitted 3 March, 2021;
originally announced March 2021.
-
Analysis of NASA's DSN Venus Express radio occultation data for year 2014
Authors:
Edoardo Gramigna,
Marzia Parisi,
Dustin Buccino,
Luis Gomez Casajus,
Marco Zannoni,
Adrien Bourgoin,
Paolo Tortora,
Kamal Oudrhiri
Abstract:
The Venus Express Radio Science Experiment (VeRa) was part of the scientific payload of the Venus Express (VEX) spacecraft and was targeted at the investigation of Venus' atmosphere, surface, and gravity field as well as the interplanetary medium. This paper describes the methods and the required calibrations applied to VEX-VeRa raw radio occultation data used to retrieve vertical profiles of Venu…
▽ More
The Venus Express Radio Science Experiment (VeRa) was part of the scientific payload of the Venus Express (VEX) spacecraft and was targeted at the investigation of Venus' atmosphere, surface, and gravity field as well as the interplanetary medium. This paper describes the methods and the required calibrations applied to VEX-VeRa raw radio occultation data used to retrieve vertical profiles of Venus' ionosphere and neutral atmosphere. In this work we perform an independent analysis of a set of 25 VEX, single-frequency (X-band), occultations carried out in 2014, recorded in open-loop at the NASA Deep Space Network. Our temperature, pressure and electron density vertical profiles are in agreement with previous studies available in the literature. Furthermore, our analysis shows that Venus' ionosphere is more influenced by the day/night condition than the latitude variations, while the neutral atmosphere experiences the opposite. Our scientific interpretation of these results is based on two major responsible effects: Venus' high thermal inertia and the zonal winds. Their presence within Venus' neutral atmosphere determine why in these regions a latitude dependence is predominant on the day/night condition. On the contrary, at higher altitudes the two aforementioned effects are less important or null, and Venus' ionosphere shows higher electron density peaks in the probed day-time occultations, regardless of the latitude.
△ Less
Submitted 21 December, 2022; v1 submitted 16 February, 2021;
originally announced February 2021.
-
Overview of the Medium and High Frequency Telescopes of the LiteBIRD satellite mission
Authors:
L. Montier,
B. Mot,
P. de Bernardis,
B. Maffei,
G. Pisano,
F. Columbro,
J. E. Gudmundsson,
S. Henrot-Versillé,
L. Lamagna,
J. Montgomery,
T. Prouvé,
M. Russell,
G. Savini,
S. Stever,
K. L. Thompson,
M. Tsujimoto,
C. Tucker,
B. Westbrook,
P. A. R. Ade,
A. Adler,
E. Allys,
K. Arnold,
D. Auguste,
J. Aumont,
R. Aurlien
, et al. (212 additional authors not shown)
Abstract:
LiteBIRD is a JAXA-led Strategic Large-Class mission designed to search for the existence of the primordial gravitational waves produced during the inflationary phase of the Universe, through the measurements of their imprint onto the polarization of the cosmic microwave background (CMB). These measurements, requiring unprecedented sensitivity, will be performed over the full sky, at large angular…
▽ More
LiteBIRD is a JAXA-led Strategic Large-Class mission designed to search for the existence of the primordial gravitational waves produced during the inflationary phase of the Universe, through the measurements of their imprint onto the polarization of the cosmic microwave background (CMB). These measurements, requiring unprecedented sensitivity, will be performed over the full sky, at large angular scales, and over 15 frequency bands from 34GHz to 448GHz. The LiteBIRD instruments consist of three telescopes, namely the Low-, Medium- and High-Frequency Telescope (respectively LFT, MFT and HFT). We present in this paper an overview of the design of the Medium-Frequency Telescope (89-224GHz) and the High-Frequency Telescope (166-448GHz), the so-called MHFT, under European responsibility, which are two cryogenic refractive telescopes cooled down to 5K. They include a continuous rotating half-wave plate as the first optical element, two high-density polyethylene (HDPE) lenses and more than three thousand transition-edge sensor (TES) detectors cooled to 100mK. We provide an overview of the concept design and the remaining specific challenges that we have to face in order to achieve the scientific goals of LiteBIRD.
△ Less
Submitted 1 February, 2021;
originally announced February 2021.
-
LiteBIRD: JAXA's new strategic L-class mission for all-sky surveys of cosmic microwave background polarization
Authors:
M. Hazumi,
P. A. R. Ade,
A. Adler,
E. Allys,
K. Arnold,
D. Auguste,
J. Aumont,
R. Aurlien,
J. Austermann,
C. Baccigalupi,
A. J. Banday,
R. Banjeri,
R. B. Barreiro,
S. Basak,
J. Beall,
D. Beck,
S. Beckman,
J. Bermejo,
P. de Bernardis,
M. Bersanelli,
J. Bonis,
J. Borrill,
F. Boulanger,
S. Bounissou,
M. Brilenkov
, et al. (213 additional authors not shown)
Abstract:
LiteBIRD, the Lite (Light) satellite for the study of B-mode polarization and Inflation from cosmic background Radiation Detection, is a space mission for primordial cosmology and fundamental physics. JAXA selected LiteBIRD in May 2019 as a strategic large-class (L-class) mission, with its expected launch in the late 2020s using JAXA's H3 rocket. LiteBIRD plans to map the cosmic microwave backgrou…
▽ More
LiteBIRD, the Lite (Light) satellite for the study of B-mode polarization and Inflation from cosmic background Radiation Detection, is a space mission for primordial cosmology and fundamental physics. JAXA selected LiteBIRD in May 2019 as a strategic large-class (L-class) mission, with its expected launch in the late 2020s using JAXA's H3 rocket. LiteBIRD plans to map the cosmic microwave background (CMB) polarization over the full sky with unprecedented precision. Its main scientific objective is to carry out a definitive search for the signal from cosmic inflation, either making a discovery or ruling out well-motivated inflationary models. The measurements of LiteBIRD will also provide us with an insight into the quantum nature of gravity and other new physics beyond the standard models of particle physics and cosmology. To this end, LiteBIRD will perform full-sky surveys for three years at the Sun-Earth Lagrangian point L2 for 15 frequency bands between 34 and 448 GHz with three telescopes, to achieve a total sensitivity of 2.16 micro K-arcmin with a typical angular resolution of 0.5 deg. at 100GHz. We provide an overview of the LiteBIRD project, including scientific objectives, mission requirements, top-level system requirements, operation concept, and expected scientific outcomes.
△ Less
Submitted 29 January, 2021;
originally announced January 2021.
-
Simons Observatory Small Aperture Telescope overview
Authors:
Kenji Kiuchi,
Shunsuke Adachi,
Aamir M. Ali,
Kam Arnold,
Peter Ashton,
Jason E. Austermann,
Andrew Bazako,
James A. Beall,
Yuji Chinone,
Gabriele Coppi,
Kevin D. Crowley,
Kevin T. Crowley,
Simon Dicker,
Bradley Dober,
Shannon M. Duff,
Giulio Fabbian,
Nicholas Galitzki,
Joseph E. Golec,
Jon E. Gudmundsson,
Kathleen Harrington,
Masaya Hasegawa,
Makoto Hattori,
Charles A. Hill,
Shuay-Pwu Patty Ho,
Johannes Hubmayr
, et al. (29 additional authors not shown)
Abstract:
The Simons Observatory (SO) is a cosmic microwave background (CMB) experiment from the Atacama Desert in Chile comprising three small-aperture telescopes (SATs) and one large-aperture telescope (LAT). In total, SO will field over 60,000 transition-edge sensor (TES) bolometers in six spectral bands centered between 27 and 280 GHz in order to achieve the sensitivity necessary to measure or constrain…
▽ More
The Simons Observatory (SO) is a cosmic microwave background (CMB) experiment from the Atacama Desert in Chile comprising three small-aperture telescopes (SATs) and one large-aperture telescope (LAT). In total, SO will field over 60,000 transition-edge sensor (TES) bolometers in six spectral bands centered between 27 and 280 GHz in order to achieve the sensitivity necessary to measure or constrain numerous cosmological quantities. In this work, we focus on the SATs which are optimized to search for primordial gravitational waves that are detected as parity-odd polarization patterns called a B-modes on degree scales in the CMB. Each SAT employs a single optics tube with TES arrays operating at 100 mK. The high throughput optics system has a 42 cm aperture and a 35-degree field of view coupled to a 36 cm diameter focal plane. The optics consist of three metamaterial anti-re ection coated silicon lenses. Cryogenic ring baffles with engineered blackbody absorbers are installed in the optics tube to minimize the stray light. The entire optics tube is cooled to 1 K. A cryogenic continuously rotating half-wave plate near the sky side of the aperture stop helps to minimize the effect of atmospheric uctuations. The telescope warm baffling consists of a forebaffle, an elevation stage mounted co-moving shield, and a fixed ground shield that together control the far side-lobes and mitigates ground-synchronous systematics. We present the status of the SAT development.
△ Less
Submitted 28 January, 2021;
originally announced January 2021.
-
QUBIC IV: Performance of TES Bolometers and Readout Electronics
Authors:
M. Piat,
G. Stankowiak,
E. S. Battistelli,
P. de Bernardis,
G. D Alessandro,
M. De Petris,
L. Grandsire,
J. -Ch. Hamilton,
T. D. Hoang,
S. Marnieros,
S. Masi,
A. Mennella,
L. Mousset,
C. O Sullivan,
D. Prele,
A. Tartari,
J. -P. Thermeau,
S. A. Torchinsky,
F. Voisin,
M. Zannoni,
P. Ade,
J. G. Alberro,
A. Almela,
G. Amico,
L. H. Arnaldi
, et al. (104 additional authors not shown)
Abstract:
A prototype version of the Q & U bolometric interferometer for cosmology (QUBIC) underwent a campaign of testing in the laboratory at Astroparticle Physics and Cosmology laboratory in Paris (APC). The detection chain is currently made of 256 NbSi transition edge sensors (TES) cooled to 320 mK. The readout system is a 128:1 time domain multiplexing scheme based on 128 SQUIDs cooled at 1 K that are…
▽ More
A prototype version of the Q & U bolometric interferometer for cosmology (QUBIC) underwent a campaign of testing in the laboratory at Astroparticle Physics and Cosmology laboratory in Paris (APC). The detection chain is currently made of 256 NbSi transition edge sensors (TES) cooled to 320 mK. The readout system is a 128:1 time domain multiplexing scheme based on 128 SQUIDs cooled at 1 K that are controlled and amplified by an SiGe application specific integrated circuit at 40 K. We report the performance of this readout chain and the characterization of the TES. The readout system has been functionally tested and characterized in the lab and in QUBIC. The low noise amplifier demonstrated a white noise level of 0.3 nV.Hz^-0.5. Characterizations of the QUBIC detectors and readout electronics includes the measurement of I-V curves, time constant and the noise equivalent power. The QUBIC TES bolometer array has approximately 80% detectors within operational parameters. It demonstrated a thermal decoupling compatible with a phonon noise of about 5.10^-17 W.Hz^-0.5 at 410 mK critical temperature. While still limited by microphonics from the pulse tubes and noise aliasing from readout system, the instrument noise equivalent power is about 2.10^-16 W.Hz^-0.5, enough for the demonstration of bolometric interferometry.
△ Less
Submitted 20 October, 2021; v1 submitted 17 January, 2021;
originally announced January 2021.
-
Concept Design of Low Frequency Telescope for CMB B-mode Polarization satellite LiteBIRD
Authors:
Y. Sekimoto,
P. A. R. Ade,
A. Adler,
E. Allys,
K. Arnold,
D. Auguste,
J. Aumont,
R. Aurlien,
J. Austermann,
C. Baccigalupi,
A. J. Banday,
R. Banerji,
R. B. Barreiro,
S. Basak,
J. Beall,
D. Beck,
S. Beckman,
J. Bermejo,
P. de Bernardis,
M. Bersanelli,
J. Bonis,
J. Borrill,
F. Boulanger,
S. Bounissou,
M. Brilenkov
, et al. (212 additional authors not shown)
Abstract:
LiteBIRD has been selected as JAXA's strategic large mission in the 2020s, to observe the cosmic microwave background (CMB) $B$-mode polarization over the full sky at large angular scales. The challenges of LiteBIRD are the wide field-of-view (FoV) and broadband capabilities of millimeter-wave polarization measurements, which are derived from the system requirements. The possible paths of stray li…
▽ More
LiteBIRD has been selected as JAXA's strategic large mission in the 2020s, to observe the cosmic microwave background (CMB) $B$-mode polarization over the full sky at large angular scales. The challenges of LiteBIRD are the wide field-of-view (FoV) and broadband capabilities of millimeter-wave polarization measurements, which are derived from the system requirements. The possible paths of stray light increase with a wider FoV and the far sidelobe knowledge of $-56$ dB is a challenging optical requirement. A crossed-Dragone configuration was chosen for the low frequency telescope (LFT : 34--161 GHz), one of LiteBIRD's onboard telescopes. It has a wide field-of-view ($18^\circ \times 9^\circ$) with an aperture of 400 mm in diameter, corresponding to an angular resolution of about 30 arcminutes around 100 GHz. The focal ratio f/3.0 and the crossing angle of the optical axes of 90$^\circ$ are chosen after an extensive study of the stray light. The primary and secondary reflectors have rectangular shapes with serrations to reduce the diffraction pattern from the edges of the mirrors. The reflectors and structure are made of aluminum to proportionally contract from warm down to the operating temperature at $5\,$K. A 1/4 scaled model of the LFT has been developed to validate the wide field-of-view design and to demonstrate the reduced far sidelobes. A polarization modulation unit (PMU), realized with a half-wave plate (HWP) is placed in front of the aperture stop, the entrance pupil of this system. A large focal plane with approximately 1000 AlMn TES detectors and frequency multiplexing SQUID amplifiers is cooled to 100 mK. The lens and sinuous antennas have broadband capability. Performance specifications of the LFT and an outline of the proposed verification plan are presented.
△ Less
Submitted 15 January, 2021;
originally announced January 2021.
-
The Balloon-Borne Large Aperture Submillimeter Telescope Observatory
Authors:
Ian Lowe,
Gabriele Coppi,
Peter A. R. Ade,
Peter C. Ashton,
Jason E. Austermann,
James Beall,
Susan Clark,
Erin G. Cox,
Mark J. Devlin,
Simon Dicker,
Bradley J. Dober,
Valentina Fanfani,
Laura M. Fissel,
Nicholas Galitzki,
Jiansong Gao,
Brandon Hensley,
Johannes Hubmayr,
Steven Li,
Zhi-Yun Li,
Nathan P. Lourie,
Peter G. Martin,
Philip Mauskopf,
Federico Nati,
Giles Novak,
Giampaolo Pisano
, et al. (8 additional authors not shown)
Abstract:
The BLAST Observatory is a proposed superpressure balloon-borne polarimeter designed for a future ultra-long duration balloon campaign from Wanaka, New Zealand. To maximize scientific output while staying within the stringent superpressure weight envelope, BLAST will feature new 1.8m off-axis optical system contained within a lightweight monocoque structure gondola. The payload will incorporate a…
▽ More
The BLAST Observatory is a proposed superpressure balloon-borne polarimeter designed for a future ultra-long duration balloon campaign from Wanaka, New Zealand. To maximize scientific output while staying within the stringent superpressure weight envelope, BLAST will feature new 1.8m off-axis optical system contained within a lightweight monocoque structure gondola. The payload will incorporate a 300L $^4$He cryogenic receiver which will cool 8,274 microwave kinetic inductance detectors (MKIDs) to 100mK through the use of an adiabatic demagnetization refrigerator (ADR) in combination with a $^3$He sorption refrigerator all backed by a liquid helium pumped pot operating at 2K. The detector readout utilizes a new Xilinx RFSOC-based system which will run the next-generation of the BLAST-TNG KIDPy software. With this instrument we aim to answer outstanding questions about dust dynamics as well as provide community access to the polarized submillimeter sky made possible by high-altitude observing unrestricted by atmospheric transmission. The BLAST Observatory is designed for a minimum 31-day flight of which 70$\%$ will be dedicated to observations for BLAST scientific goals and the remaining 30$\%$ will be open to proposals from the wider astronomical community through a shared-risk proposals program.
△ Less
Submitted 2 December, 2020;
originally announced December 2020.
-
The Simons Observatory: gain, bandpass and polarization-angle calibration requirements for B-mode searches
Authors:
Maximilian H. Abitbol,
David Alonso,
Sara M. Simon,
Jack Lashner,
Kevin T. Crowley,
Aamir M. Ali,
Susanna Azzoni,
Carlo Baccigalupi,
Darcy Barron,
Michael L. Brown,
Erminia Calabrese,
Julien Carron,
Yuji Chinone,
Jens Chluba,
Gabriele Coppi,
Kevin D. Crowley,
Mark Devlin,
Jo Dunkley,
Josquin Errard,
Valentina Fanfani,
Nicholas Galitzki,
Martina Gerbino,
J. Colin Hill,
Bradley R. Johnson,
Baptiste Jost
, et al. (23 additional authors not shown)
Abstract:
We quantify the calibration requirements for systematic uncertainties for next-generation ground-based observatories targeting the large-angle $B$-mode polarization of the Cosmic Microwave Background, with a focus on the Simons Observatory (SO). We explore uncertainties on gain calibration, bandpass center frequencies, and polarization angles, including the frequency variation of the latter across…
▽ More
We quantify the calibration requirements for systematic uncertainties for next-generation ground-based observatories targeting the large-angle $B$-mode polarization of the Cosmic Microwave Background, with a focus on the Simons Observatory (SO). We explore uncertainties on gain calibration, bandpass center frequencies, and polarization angles, including the frequency variation of the latter across the bandpass. We find that gain calibration and bandpass center frequencies must be known to percent levels or less to avoid biases on the tensor-to-scalar ratio $r$ on the order of $Δr\sim10^{-3}$, in line with previous findings. Polarization angles must be calibrated to the level of a few tenths of a degree, while their frequency variation between the edges of the band must be known to ${\cal O}(10)$ degrees. Given the tightness of these calibration requirements, we explore the level to which residual uncertainties on these systematics would affect the final constraints on $r$ if included in the data model and marginalized over. We find that the additional parameter freedom does not degrade the final constraints on $r$ significantly, broadening the error bar by ${\cal O}(10\%)$ at most. We validate these results by reanalyzing the latest publicly available data from the BICEP2/Keck collaboration within an extended parameter space covering both cosmological, foreground and systematic parameters. Finally, our results are discussed in light of the instrument design and calibration studies carried out within SO.
△ Less
Submitted 15 June, 2021; v1 submitted 4 November, 2020;
originally announced November 2020.
-
QUBIC I: Overview and ScienceProgram
Authors:
J. -Ch. Hamilton,
L. Mousset,
E. S. Battistelli,
M. -A. Bigot-Sazy,
P. Chanial,
R. Charlassier,
G. D'Alessandro,
P. de Bernardis,
M. De Petris,
M. M. Gamboa Lerena,
L. Grandsire,
S. Lau,
S. Marnieros,
S. Masi,
A. Mennella,
C. O'Sullivan,
M. Piat,
G. Riccardi,
C. Scóccola,
M. Stolpovskiy,
A. Tartari,
S. A. Torchinsky,
F. Voisin,
M. Zannoni,
P. Ade
, et al. (105 additional authors not shown)
Abstract:
The Q $\&$ U Bolometric Interferometer for Cosmology (QUBIC) is a novel kind of polarimeter optimized for the measurement of the B-mode polarization of the Cosmic Microwave Background (CMB), which is one of the major challenges of observational cosmology. The signal is expected to be of the order of a few tens of nK, prone to instrumental systematic effects and polluted by various astrophysical fo…
▽ More
The Q $\&$ U Bolometric Interferometer for Cosmology (QUBIC) is a novel kind of polarimeter optimized for the measurement of the B-mode polarization of the Cosmic Microwave Background (CMB), which is one of the major challenges of observational cosmology. The signal is expected to be of the order of a few tens of nK, prone to instrumental systematic effects and polluted by various astrophysical foregrounds which can only be controlled through multichroic observations. QUBIC is designed to address these observational issues with a novel approach that combines the advantages of interferometry in terms of control of instrumental systematic effects with those of bolometric detectors in terms of wide-band, background-limited sensitivity. The QUBIC synthesized beam has a frequency-dependent shape that results in the ability to produce maps of the CMB polarization in multiple sub-bands within the two physical bands of the instrument (150 and 220 GHz). These features make QUBIC complementary to other instruments and makes it particularly well suited to characterize and remove Galactic foreground contamination. In this article, first of a series of eight, we give an overview of the QUBIC instrument design, the main results of the calibration campaign, and present the scientific program of QUBIC including not only the measurement of primordial B-modes, but also the measurement of Galactic foregrounds. We give forecasts for typical observations and measurements: with three years of integration on the sky and assuming perfect foreground removal as well as stable atmospheric conditions from our site in Argentina, our simulations show that we can achieve a statistical sensitivity to the effective tensor-to-scalar ratio (including primordial and foreground B-modes) $σ(r)=0.015$.
△ Less
Submitted 26 August, 2021; v1 submitted 4 November, 2020;
originally announced November 2020.
-
QUBIC II: Spectro-Polarimetry with Bolometric Interferometry
Authors:
L. Mousset,
M. M. Gamboa Lerena,
E. S. Battistelli,
P. de Bernardis,
P. Chanial,
G. D'Alessandro,
G. Dashyan,
M. De Petris,
L. Grandsire,
J. -Ch. Hamilton,
F. Incardona,
S. Landau,
S. Marnieros,
S. Masi,
A. Mennella,
C. O'Sullivan,
M. Piat,
G. Ricciardi,
C. G. Scóccola,
M. Stolpovskiy,
A. Tartari,
J. -P. Thermeau,
S. A. Torchinsky,
F. Voisin,
M. Zannoni
, et al. (106 additional authors not shown)
Abstract:
Bolometric interferometry is a novel technique that has the ability to perform spectral imaging. A bolometric interferometer observes the sky in a wide frequency band and can reconstruct sky maps in several sub-bands within the physical band in post-processing of the data. This provides a powerful spectral method to discriminate between the cosmic microwave background (CMB) and astrophysical foreg…
▽ More
Bolometric interferometry is a novel technique that has the ability to perform spectral imaging. A bolometric interferometer observes the sky in a wide frequency band and can reconstruct sky maps in several sub-bands within the physical band in post-processing of the data. This provides a powerful spectral method to discriminate between the cosmic microwave background (CMB) and astrophysical foregrounds. In this paper, the methodology is illustrated with examples based on the Q \& U Bolometric Interferometer for Cosmology (QUBIC) which is a ground-based instrument designed to measure the B-mode polarization of the sky at millimeter wavelengths. We consider the specific cases of point source reconstruction and Galactic dust mapping and we characterize the point spread function as a function of frequency. We study the noise properties of spectral imaging, especially the correlations between sub-bands, using end-to-end simulations together with a fast noise simulator. We conclude showing that spectral imaging performance are nearly optimal up to five sub-bands in the case of QUBIC.
△ Less
Submitted 28 March, 2022; v1 submitted 28 October, 2020;
originally announced October 2020.
-
The Simons Observatory: Metamaterial Microwave Absorber (MMA) and its Cryogenic Applications
Authors:
Zhilei Xu,
Grace E. Chesmore,
Shunsuke Adachi,
Aamir M. Ali,
Andrew Bazarko,
Gabriele Coppi,
Mark Devlin,
Tom Devlin,
Simon R. Dicker,
Patricio A. Gallardo,
Joseph E. Golec,
Jon E. Gudmundsson,
Kathleen Harrington,
Makoto Hattori,
Anna Kofman,
Kenji Kiuchi,
Akito Kusaka,
Michele Limon,
Frederick Matsuda,
Jeff McMahon,
Federico Nati,
Michael D. Niemack,
Shreya Sutariya,
Aritoki Suzuki,
Grant P. Teply
, et al. (4 additional authors not shown)
Abstract:
Controlling stray light at millimeter wavelengths requires special optical design and selection of absorptive materials that should be compatible with cryogenic operating environments. While a wide selection of absorptive materials exists, these typically exhibit high indices of refraction and reflect/scatter a significant fraction of light before absorption. For many lower index materials such as…
▽ More
Controlling stray light at millimeter wavelengths requires special optical design and selection of absorptive materials that should be compatible with cryogenic operating environments. While a wide selection of absorptive materials exists, these typically exhibit high indices of refraction and reflect/scatter a significant fraction of light before absorption. For many lower index materials such as commercial microwave absorbers, their applications in cryogenic environments are challenging. In this paper, we present a new tool to control stray light: metamaterial microwave absorber tiles. These tiles comprise an outer metamaterial layer that approximates a lossy gradient index anti-reflection coating. They are fabricated via injection molding commercially available carbon-loaded polyurethane (25\% by mass). The injection molding technology enables mass production at low cost. The design of these tiles is presented, along with thermal tests to 1 K. Room temperature optical measurements verify their control of reflectance to less than 1\% up to 65$\circ$ angles of incidence, and control of wide angle scattering below 0.01\%. The dielectric properties of the bulk carbon-loaded material used in the tiles is also measured at different temperatures, confirming that the material maintains similar dielectric properties down to 3 K.
△ Less
Submitted 22 February, 2021; v1 submitted 5 October, 2020;
originally announced October 2020.
-
QUBIC VII: The feedhorn-switch system of the technological demonstrator
Authors:
F. Cavaliere,
A. Mennella,
M. Zannoni,
P. Battaglia,
E. S. Battistelli,
D. Burke,
G. D'Alessandro,
P. de Bernardis,
M. De Petris,
C. Franceschet,
L. Grandsire,
J. -Ch. Hamilton,
B. Maffei,
E. Manzan,
S. Marnieros,
S. Masi,
C. O'Sullivan,
A. Passerini,
F. Pezzotta,
M. Piat,
A. Tartari,
S. A. Torchinsky,
D. Viganò,
F. Voisin,
P. Ade
, et al. (106 additional authors not shown)
Abstract:
We present the design, manufacturing and performance of the horn-switch system developed for the technological demonstrator of QUBIC (the $Q$\&$U$ Bolometric Interferometer for Cosmology). This system is constituted of 64 back-to-back dual-band (150\,GHz and 220\,GHz) corrugated feed-horns interspersed with mechanical switches used to select desired baselines during the instrument self-calibration…
▽ More
We present the design, manufacturing and performance of the horn-switch system developed for the technological demonstrator of QUBIC (the $Q$\&$U$ Bolometric Interferometer for Cosmology). This system is constituted of 64 back-to-back dual-band (150\,GHz and 220\,GHz) corrugated feed-horns interspersed with mechanical switches used to select desired baselines during the instrument self-calibration. We manufactured the horns in aluminum platelets milled by photo-chemical etching and mechanically tightened with screws. The switches are based on steel blades that open and close the wave-guide between the back-to-back horns and are operated by miniaturized electromagnets. We also show the current development status of the feedhorn-switch system for the QUBIC full instrument, based on an array of 400 horn-switch assemblies.
△ Less
Submitted 1 April, 2022; v1 submitted 28 August, 2020;
originally announced August 2020.
-
The large scale polarization explorer (LSPE) for CMB measurements: performance forecast
Authors:
The LSPE collaboration,
G. Addamo,
P. A. R. Ade,
C. Baccigalupi,
A. M. Baldini,
P. M. Battaglia,
E. S. Battistelli,
A. Baù,
P. de Bernardis,
M. Bersanelli,
M. Biasotti,
A. Boscaleri,
B. Caccianiga,
S. Caprioli,
F. Cavaliere,
F. Cei,
K. A. Cleary,
F. Columbro,
G. Coppi,
A. Coppolecchia,
F. Cuttaia,
G. D'Alessandro,
G. De Gasperis,
M. De Petris,
V. Fafone
, et al. (80 additional authors not shown)
Abstract:
[Abridged] The measurement of the polarization of the Cosmic Microwave Background radiation is one of the current frontiers in cosmology. In particular, the detection of the primordial B-modes, could reveal the presence of gravitational waves in the early Universe. The detection of such component is at the moment the most promising technique to probe the inflationary theory describing the very ear…
▽ More
[Abridged] The measurement of the polarization of the Cosmic Microwave Background radiation is one of the current frontiers in cosmology. In particular, the detection of the primordial B-modes, could reveal the presence of gravitational waves in the early Universe. The detection of such component is at the moment the most promising technique to probe the inflationary theory describing the very early evolution of the Universe. We present the updated performance forecast of the Large Scale Polarization Explorer (LSPE), a program dedicated to the measurement of the CMB polarization. LSPE is composed of two instruments: Strip, a radiometer-based telescope on the ground in Tenerife, and SWIPE (Short-Wavelength Instrument for the Polarization Explorer) a bolometer-based instrument designed to fly on a winter arctic stratospheric long-duration balloon. The program is among the few dedicated to observation of the Northern Hemisphere, while most of the international effort is focused into ground-based observation in the Southern Hemisphere. Measurements are currently scheduled in Winter 2021/22 for SWIPE, with a flight duration up to 15 days, and in Summer 2021 with two years observations for Strip. We describe the main features of the two instruments, identifying the most critical aspects of the design, in terms of impact into performance forecast. We estimate the expected sensitivity of each instrument and propagate their combined observing power to the sensitivity to cosmological parameters, including the effect of scanning strategy, component separation, residual foregrounds and partial sky coverage. We also set requirements on the control of the most critical systematic effects and describe techniques to mitigate their impact. LSPE can reach a sensitivity in tensor-to-scalar ratio of $σ_r<0.01$, and improve constrains on other cosmological parameters.
△ Less
Submitted 9 August, 2021; v1 submitted 25 August, 2020;
originally announced August 2020.
-
QUBIC VI: cryogenic half wave plate rotator, design and performances
Authors:
G. D'Alessandro,
L. Mele,
F. Columbro,
G. Amico,
E. S. Battistelli,
P. de Bernardis,
A. Coppolecchia,
M. De Petris,
L. Grandsire,
J. -Ch. Hamilton,
L. Lamagna,
S. Marnieros,
S. Masi,
A. Mennella,
C. O'Sullivan,
A. Paiella,
F. Piacentini,
M. Piat,
G. Pisano,
G. Presta,
A. Tartari,
S. A. Torchinsky,
F. Voisin,
M. Zannoni,
P. Ade
, et al. (104 additional authors not shown)
Abstract:
Inflation Gravity Waves B-Modes polarization detection is the ultimate goal of modern large angular scale cosmic microwave background (CMB) experiments around the world. A big effort is undergoing with the deployment of many ground-based, balloon-borne and satellite experiments using different methods to separate this faint polarized component from the incoming radiation. One of the largely used t…
▽ More
Inflation Gravity Waves B-Modes polarization detection is the ultimate goal of modern large angular scale cosmic microwave background (CMB) experiments around the world. A big effort is undergoing with the deployment of many ground-based, balloon-borne and satellite experiments using different methods to separate this faint polarized component from the incoming radiation. One of the largely used technique is the Stokes Polarimetry that uses a rotating half-wave plate (HWP) and a linear polarizer to separate and modulate the polarization components with low residual cross-polarization. This paper describes the QUBIC Stokes Polarimeter highlighting its design features and its performances. A common systematic with these devices is the generation of large spurious signals synchronous with the rotation and proportional to the emissivity of the optical elements. A key feature of the QUBIC Stokes Polarimeter is to operate at cryogenic temperature in order to minimize this unwanted component. Moving efficiently this large optical element at low temperature constitutes a big engineering challenge in order to reduce friction power dissipation. Big attention has been given during the designing phase to minimize the differential thermal contractions between parts. The rotation is driven by a stepper motor placed outside the cryostat to avoid thermal load dissipation at cryogenic temperature. The tests and the results presented in this work show that the QUBIC polarimeter can easily achieve a precision below 0.1° in positioning simply using the stepper motor precision and the optical absolute encoder. The rotation induces only few mK of extra power load on the second cryogenic stage (~ 8 K).
△ Less
Submitted 19 November, 2020; v1 submitted 24 August, 2020;
originally announced August 2020.
-
QUBIC V: Cryogenic system design and performance
Authors:
S. Masi,
E. S. Battistelli,
P. de Bernardis,
C. Chapron,
F. Columbro,
G. D'Alessandro,
M. De Petris,
L. Grandsire,
J. -Ch. Hamilton,
S. Marnieros,
L. Mele,
A. May,
A. Mennella,
C. O'Sullivan,
A. Paiella,
F. Piacentini,
M. Piat,
L. Piccirillo,
G. Presta,
A. Schillaci,
A. Tartari,
J. -P. Thermeau,
S. A. Torchinsky,
F. Voisin,
M. Zannoni
, et al. (104 additional authors not shown)
Abstract:
Current experiments aimed at measuring the polarization of the Cosmic Microwave Background (CMB) use cryogenic detector arrays and cold optical systems to boost the mapping speed of the sky survey. For these reasons, large volume cryogenic systems, with large optical windows, working continuously for years, are needed. Here we report on the cryogenic system of the QUBIC (Q and U Bolometric Interfe…
▽ More
Current experiments aimed at measuring the polarization of the Cosmic Microwave Background (CMB) use cryogenic detector arrays and cold optical systems to boost the mapping speed of the sky survey. For these reasons, large volume cryogenic systems, with large optical windows, working continuously for years, are needed. Here we report on the cryogenic system of the QUBIC (Q and U Bolometric Interferometer for Cosmology) experiment: we describe its design, fabrication, experimental optimization and validation in the Technological Demonstrator configuration. The QUBIC cryogenic system is based on a large volume cryostat, using two pulse-tube refrigerators to cool at ~3K a large (~1 m^3) volume, heavy (~165kg) instrument, including the cryogenic polarization modulator, the corrugated feedhorns array, and the lower temperature stages; a 4He evaporator cooling at ~1K the interferometer beam combiner; a 3He evaporator cooling at ~0.3K the focal-plane detector arrays. The cryogenic system has been tested and validated for more than 6 months of continuous operation. The detector arrays have reached a stable operating temperature of 0.33K, while the polarization modulator has been operated from a ~10K base temperature. The system has been tilted to cover the boresight elevation range 20 deg -90 deg without significant temperature variations. The instrument is now ready for deployment to the high Argentinean Andes.
△ Less
Submitted 25 August, 2021; v1 submitted 24 August, 2020;
originally announced August 2020.
-
QUBIC VIII: Optical design and performance
Authors:
C. O'Sullivan,
M. De Petris,
G. Amico,
E. S. Battistelli,
D. Burke,
D. Buzi,
C. Chapron,
L. Conversi,
G. D'Alessandro,
P. de Bernardis,
M. De Leo,
D. Gayer,
L. Grandsire,
J. -Ch. Hamilton,
S. Marnieros,
S. Masi,
A. Mattei,
A. Mennella,
L. Mousset,
J. D. Murphy,
A. Pelosi,
M. Perciballi,
M. Piat,
S. Scully,
A. Tartari
, et al. (104 additional authors not shown)
Abstract:
The Q and U Bolometric Interferometer for Cosmology (QUBIC) is a ground-based experiment that aims to detect B-mode polarisation anisotropies in the CMB at angular scales around the l=100 recombination peak. Systematic errors make ground-based observations of B modes at millimetre wavelengths very challenging and QUBIC mitigates these problems in a somewhat complementary way to other existing or p…
▽ More
The Q and U Bolometric Interferometer for Cosmology (QUBIC) is a ground-based experiment that aims to detect B-mode polarisation anisotropies in the CMB at angular scales around the l=100 recombination peak. Systematic errors make ground-based observations of B modes at millimetre wavelengths very challenging and QUBIC mitigates these problems in a somewhat complementary way to other existing or planned experiments using the novel technique of bolometric interferometry. This technique takes advantage of the sensitivity of an imager and the systematic error control of an interferometer. A cold reflective optical combiner superimposes there-emitted beams from 400 aperture feedhorns on two focal planes. A shielding system composedof a fixed groundshield, and a forebaffle that moves with the instrument, limits the impact of local contaminants. The modelling, design, manufacturing and preliminary measurements of the optical components are described in this paper.
△ Less
Submitted 25 August, 2021; v1 submitted 23 August, 2020;
originally announced August 2020.
-
QUBIC III: Laboratory Characterization
Authors:
S. A. Torchinsky,
J. -Ch. Hamilton,
M. Piat,
E. S. Battistelli,
C. Chapron,
G. D'Alessandro,
P. de Bernardis,
M. De Petris,
M. M. Gamboa Lerena,
M. González,
L. Grandsire,
S. Masi,
S. Marnieros,
A. Mennella,
L. Mousset,
J. D. Murphy,
D. Prêle,
G. Stankowiak,
C. O'Sullivan,
A. Tartari,
J. -P. Thermeau,
F. Voisin,
M. Zannoni,
P. Ade,
J. G. Alberro
, et al. (103 additional authors not shown)
Abstract:
A prototype version of the Q & U Bolometric Interferometer for Cosmology (QUBIC) underwent a campaign of testing in the laboratory at Astroparticle Physics and Cosmology in Paris. We report the results of this Technological Demonstrator which successfully shows the feasibility of the principle of Bolometric Interferometry. Characterization of QUBIC includes the measurement of the synthesized beam,…
▽ More
A prototype version of the Q & U Bolometric Interferometer for Cosmology (QUBIC) underwent a campaign of testing in the laboratory at Astroparticle Physics and Cosmology in Paris. We report the results of this Technological Demonstrator which successfully shows the feasibility of the principle of Bolometric Interferometry. Characterization of QUBIC includes the measurement of the synthesized beam, the measurement of interference fringes, and the measurement of polarization performance. A modulated and frequency tunable millimetre-wave source in the telescope far-field is used to simulate a point source. The QUBIC pointing is scanned across the point source to produce beam maps. Polarization modulation is measured using a rotating Half Wave Plate. The measured beam matches well to the theoretical simulations and gives QUBIC the ability to do spectro imaging. The polarization performance is excellent with less than 0.5\% cross-polarization rejection. QUBIC is ready for deployment on the high altitude site at Alto Chorillo, Argentina to begin scientific operations.
△ Less
Submitted 15 March, 2022; v1 submitted 23 August, 2020;
originally announced August 2020.
-
The long duration cryogenic system of the OLIMPO balloon--borne experiment: design and in--flight performance
Authors:
A. Coppolecchia,
L. Lamagna,
S. Masi,
P. A. R. Ade,
G. Amico,
E. S. Battistelli,
P. de Bernardis,
F. Columbro,
L. Conversi,
G. D'Alessandro,
M. De Petris,
M. Gervasi,
F. Nati,
L. Nati,
A. Paiella,
F. Piacentini,
G. Pisano,
G. Presta,
A. Schillaci,
C. Tucker,
M. Zannoni
Abstract:
We describe the design and in--flight performance of the cryostat and the self-contained $^{3}$He refrigerator for the OLIMPO balloon--borne experiment, a spectrophotometer to measure the Sunyaev-Zel'dovich effect in clusters of galaxies.
The $^{3}$He refrigerator provides the 0.3 K operation temperature for the four arrays of kinetic inductance detectors working in 4 bands centered at 150, 250,…
▽ More
We describe the design and in--flight performance of the cryostat and the self-contained $^{3}$He refrigerator for the OLIMPO balloon--borne experiment, a spectrophotometer to measure the Sunyaev-Zel'dovich effect in clusters of galaxies.
The $^{3}$He refrigerator provides the 0.3 K operation temperature for the four arrays of kinetic inductance detectors working in 4 bands centered at 150, 250, 350 and 460 GHz. The cryostat provides the 1.65 K base temperature for the $^{3}$He refrigerator, and cools down the reimaging optics and the filters chain at about 2 K.
The integrated system was designed for a hold time of about 15 days, to achieve the sensitivity required by the planned OLIMPO observations, and successfully operated during the first long-duration stratospheric flight of OLIMPO in July 2018.
The cryostat features two tanks, one for liquid nitrogen and the other one for liquid helium. The long hold time has been achieved by means of custom stiff G10 fiberglass tubes support, which ensures low thermal conductivity and remarkable structural stiffness; multi--layer superinsulation, and a vapour cooled shield, all reducing the heat load on the liquid helium tank.
The system was tested in the lab, with more than 15 days of unmanned operations, and then in the long duration balloon flight in the stratosphere. In both cases, the detector temperature was below 300 mK, with thermal stability better than $\pm$ 0.5 mK.
The system also operated successfully in the long duration stratospheric balloon flight.
△ Less
Submitted 24 July, 2020;
originally announced July 2020.
-
A chemically etched corrugated feedhorn array for D-band CMB observations
Authors:
Stefano Mandelli,
Elenia Manzan,
Aniello Mennella,
Francesco Cavaliere,
Daniele Viganò,
Cristian Franceschet,
Paolo de Bernardis,
Marco Bersanelli,
Maria Gabriella Castellano,
Alessandro Coppolecchia,
Angelo Cruciani,
Massimo Gervasi,
Luca Lamagna,
Andrea Limonta,
Silvia Masi,
Alessandro Paiella,
Andrea Passerini,
Giorgio Pettinari,
Francesco Piacentini,
Elisabetta Tommasi,
Angela Volpe,
Mario Zannoni
Abstract:
We present the design, manufacturing, and testing of a 37-element array of corrugated feedhorns for Cosmic Microwave Background (CMB) measurements between $140$ and $170$ GHz. The array was designed to be coupled to Kinetic Inductance Detector arrays, either directly (for total power measurements) or through an orthomode transducer (for polarization measurements). We manufactured the array in plat…
▽ More
We present the design, manufacturing, and testing of a 37-element array of corrugated feedhorns for Cosmic Microwave Background (CMB) measurements between $140$ and $170$ GHz. The array was designed to be coupled to Kinetic Inductance Detector arrays, either directly (for total power measurements) or through an orthomode transducer (for polarization measurements). We manufactured the array in platelets by chemically etching aluminum plates of $0.3$ mm and $0.4$ mm thickness. The process is fast, low-cost, scalable, and yields high-performance antennas compared to other techniques in the same frequency range. Room temperature electromagnetic measurements show excellent repeatability with an average cross polarization level about $-20$ dB, return loss about $-25$ dB, first sidelobes below $-25$ dB and far sidelobes below $-35$ dB. Our results qualify this process as a valid candidate for state-of-the-art CMB experiments, where large detector arrays with high sensitivity and polarization purity are of paramount importance in the quest for the discovery of CMB polarization $B$-modes.
△ Less
Submitted 21 October, 2020; v1 submitted 26 June, 2020;
originally announced June 2020.
-
Resonance locking in giant planets indicated by the rapid orbital expansion of Titan
Authors:
Valéry Lainey,
Luis Gomez Casajus,
Jim Fuller,
Marco Zannoni,
Paolo Tortora,
Nicholas Cooper,
Carl Murray,
Dario Modenini,
Ryan S. Park,
Vincent Robert,
Qingfeng Zhang
Abstract:
Tidal effects in planetary systems are the main driver in the orbital migration of natural satellites. They result from physical processes occurring deep inside celestial bodies, whose effects are rarely observable from surface imaging. For giant planet systems, the tidal migration rate is determined by poorly understood dissipative processes in the planet, and standard theories suggest an orbital…
▽ More
Tidal effects in planetary systems are the main driver in the orbital migration of natural satellites. They result from physical processes occurring deep inside celestial bodies, whose effects are rarely observable from surface imaging. For giant planet systems, the tidal migration rate is determined by poorly understood dissipative processes in the planet, and standard theories suggest an orbital expansion rate inversely proportional to the power 11/2 in distance, implying little migration for outer moons such as Saturn's largest moon, Titan. Here, we use two independent measurements obtained with the Cassini spacecraft to measure Titan's orbital expansion rate. We find Titan migrates away from Saturn at 11.3 $\pm$ 2.0 cm/year, corresponding to a tidal quality factor of Saturn of Q $\simeq$ 100, and a migration timescale of roughly 10 Gyr. This rapid orbital expansion suggests Titan formed significantly closer to Saturn and has migrated outward to its current position. Our results for Titan and five other moons agree with the predictions of a resonance locking tidal theory, sustained by excitation of inertial waves inside the planet. The associated tidal expansion is only weakly sensitive to orbital distance, motivating a revision of the evolutionary history of Saturn's moon system. The resonance locking mechanism could operate in other systems such as stellar binaries and exoplanet systems, and it may allow for tidal dissipation to occur at larger orbital separations than previously believed.
△ Less
Submitted 11 June, 2020;
originally announced June 2020.