-
Grow-up of a Filament Channel by Intermittent Small-scale Magnetic Reconnection
Authors:
H. T. Li,
X. Cheng,
J. H. Guo,
X. L. Yan,
L. F. Wang,
Z. Zhong,
C. Li,
M. D. Ding
Abstract:
Filament channel (FC), a plasma volume where the magnetic field is primarily aligned with the polarity inversion line, is believed to be the pre-eruptive configuration of coronal mass ejections. Nevertheless, evidence for how the FC is formed is still elusive. In this paper, we present a detailed study on the build-up of a FC to understand its formation mechanism. The New Vacuum Solar Telescope of…
▽ More
Filament channel (FC), a plasma volume where the magnetic field is primarily aligned with the polarity inversion line, is believed to be the pre-eruptive configuration of coronal mass ejections. Nevertheless, evidence for how the FC is formed is still elusive. In this paper, we present a detailed study on the build-up of a FC to understand its formation mechanism. The New Vacuum Solar Telescope of Yunnan Observatories and Optical and Near-Infrared Solar Eruption Tracer of Nanjing University, as well as the AIA and HMI on board Solar Dynamics Observatory are used to study the grow-up process of the FC. Furthermore, we reconstruct the non-linear force-free field (NLFFF) of the active region using the regularized Biot-Savart laws (RBSL) and magnetofrictional method to reveal three-dimension (3D) magnetic field properties of the FC. We find that partial filament materials are quickly transferred to longer magnetic field lines formed by small-scale magnetic reconnection, as evidenced by dot-like Hα/EUV brightenings and subsequent bidirectional outflow jets, as well as untwisting motions. The Hα/EUV bursts appear repeatedly at the same location and are closely associated with flux cancellation, which occurs between two small-scale opposite polarities and is driven by shearing and converging motions. The 3D NLFFF model reveals that the reconnection takes place in a hyperbolic flux tube that is located above the flux cancellation site and below the FC. The FC is gradually built up toward a twisted flux rope via series of small-scale reconnection events that occur intermittently prior to the eruption.
△ Less
Submitted 17 March, 2022;
originally announced March 2022.
-
Dynamics evolution of a solar active-region filament from quasi-static state to eruption: rolling motion, untwisting motion, material transfer, and chirality
Authors:
X. L. Yan,
Q. L. Li,
G. R. Chen,
Z. K. Xue,
L. Feng,
J. C. Wang,
L. H. Yang,
Y. Zhang
Abstract:
To better understand magnetic structure and eruptive process of solar filaments, a solar active-region filament (labeled F2) eruption associated with a B-class flare was investigated by using high-resolution H$α$ data from the 1 m New Vacuum Solar Telescope (NVST), combined with EUV observations of the Solar Dynamical Observatory (SDO). The filament F2 was disturbed by another filament (labeled F1…
▽ More
To better understand magnetic structure and eruptive process of solar filaments, a solar active-region filament (labeled F2) eruption associated with a B-class flare was investigated by using high-resolution H$α$ data from the 1 m New Vacuum Solar Telescope (NVST), combined with EUV observations of the Solar Dynamical Observatory (SDO). The filament F2 was disturbed by another filament (labeled F1) eruption that experienced a whip-like motion. Before the filament F2 eruption, the Dopplergrams show that the southern and the northern parts of the filament F2 body exhibit blueshift and redshift along the filament spine, simultaneously. It implies that the filament F2 was rolling from one side to the other. During the filament F2 eruption, the Doppler velocity shifts of the filament body are opposite to that before its eruption. It demonstrates that the filament body exhibits an untwisting motion, which can be also identified by tracing the movement of the eruptive filament threads. Moreover, it is found that the material of the filament F2 was transferred to the surrounding magnetic field loops, which is caused by magnetic reconnection between the filament F2 and the surrounding magnetic loops. According to the right-bearing threads of the filament F2 before its eruption, it can be deduced that the filament F2 is initially supported by a sheared arcade. The following observations reveal that the twisted magnetic structure of the filament F2 formed in the eruption phase.
△ Less
Submitted 22 September, 2020;
originally announced September 2020.
-
Triggering mechanism and material transfer of a failed solar filament eruption
Authors:
X. L. Yan,
Z. K. Xue,
X. Cheng,
J. Zhang,
J. C. Wang,
D. F. Kong,
L. H. Yang,
G. R. Chen,
X. S. Feng
Abstract:
Soar filament eruptions are often associated with solar flares and coronal mass ejections (CMEs), which are the major impacts on space weather. However, the fine structures and the trigger mechanisms of solar filaments are still unclear. To address these issues, we studied a failed solar active-region filament eruption associated with a C-class flare by using high-resolution H$α$ images from the N…
▽ More
Soar filament eruptions are often associated with solar flares and coronal mass ejections (CMEs), which are the major impacts on space weather. However, the fine structures and the trigger mechanisms of solar filaments are still unclear. To address these issues, we studied a failed solar active-region filament eruption associated with a C-class flare by using high-resolution H$α$ images from the New Vacuum Solar Telescope (NVST), supplemented by EUV observations of the Solar Dynamical Observatory (SDO). Before the filament eruption, a small bi-pole magnetic field emerged below the filament. And then magnetic reconnection between the filament and the emerging bi-pole magnetic field triggered the filament eruption. During the filament eruption, the untwisting motion of the filament can be clearly traced by the eruptive threads. Moreover, the foot-points of the eruptive threads are determined by tracing the descending filament materials. Note that the filament twisted structure and the right part of the eruptive filament threads cannot be seen before the filament eruption. These eruptive threads at the right part of the filament are found to be rooting in the weak negative polarities near the main negative sunspot. Moreover, a new filament formed in the filament channel due to material injection from the eruptive filament. The above observations and the potential field extrapolations are inclined to support that the filament materials were transferred into the overlying magnetic loops and the nearby filament channel by magnetic reconnection. These observations shed light on better understanding on the complexity of filament eruptions.
△ Less
Submitted 15 December, 2019;
originally announced December 2019.
-
Mass Measurements of Neutron-Deficient Y, Zr, and Nb Isotopes and Their Impact on $rp$ and $νp$ Nucleosynthesis Processes
Authors:
Y. M. Xing,
K. A. Li,
Y. H. Zhang,
X. H. Zhou,
M. Wang,
Yu. A. Litvinov,
K. Blaum,
S. Wanajo,
S. Kubono,
G. Martínez-Pinedo,
A. Sieverding,
R. J. Chen,
P. Shuai,
C. Y. Fu,
X. L. Yan,
W. J. Huang,
X. Xu,
X. D. Tang,
H. S. Xu,
T. Bao,
X. C. Chen,
B. S. Gao,
J. J. He,
Y. H. Lam,
H. F. Li
, et al. (26 additional authors not shown)
Abstract:
Using isochronous mass spectrometry at the experimental storage ring CSRe in Lanzhou, the masses of $^{82}$Zr and $^{84}$Nb were measured for the first time with an uncertainty of $\sim 10$ keV, and the masses of $^{79}$Y, $^{81}$Zr, and $^{83}$Nb were re-determined with a higher precision. %The latter differ significantly from their literature values. The latter are significantly less bound than…
▽ More
Using isochronous mass spectrometry at the experimental storage ring CSRe in Lanzhou, the masses of $^{82}$Zr and $^{84}$Nb were measured for the first time with an uncertainty of $\sim 10$ keV, and the masses of $^{79}$Y, $^{81}$Zr, and $^{83}$Nb were re-determined with a higher precision. %The latter differ significantly from their literature values. The latter are significantly less bound than their literature values. Our new and accurate masses remove the irregularities of the mass surface in this region of the nuclear chart. Our results do not support the predicted island of pronounced low $α$ separation energies for neutron-deficient Mo and Tc isotopes, making the formation of Zr-Nb cycle in the $rp$-process unlikely. The new proton separation energy of $^{83}$Nb was determined to be 490(400)~keV smaller than that in the Atomic Mass Evaluation 2012. This partly removes the overproduction of the $p$-nucleus $^{84}$Sr relative to the neutron-deficient molybdenum isotopes in the previous $νp$-process simulations.
△ Less
Submitted 6 April, 2018;
originally announced April 2018.
-
Simultaneous observation of a flux rope eruption and magnetic reconnection during an X-class solar flare
Authors:
X. L. Yan,
L. H. Yang,
Z. K. Xue,
Z. X. Mei,
D. F. Kong,
J. C. Wang,
Q. L. Li
Abstract:
In this letter, we present a spectacular eruptive flare (X8.2) associated with a coronal mass ejection (CME) on 2017 September 10 at the west limb of the Sun. A flux rope eruption is followed by the inflow, the formation of a current sheet and a cusp structure, which were simultaneously observed during the occurrence of this flare. The hierarchical layers of the cusp-shaped structure are well obse…
▽ More
In this letter, we present a spectacular eruptive flare (X8.2) associated with a coronal mass ejection (CME) on 2017 September 10 at the west limb of the Sun. A flux rope eruption is followed by the inflow, the formation of a current sheet and a cusp structure, which were simultaneously observed during the occurrence of this flare. The hierarchical layers of the cusp-shaped structure are well observed in 131 Å observation. The scenario that can be created from these observations is very consistent with the predictions of some eruptive models. Except for the characteristics mentioned above in the process of the flare predicted by classical eruption models, the current sheet separating into several small current sheets is also observed at the final stage of the flux rope eruption. The quantitative calculation of the velocities and accelerations of the inflow, hot cusp structure, and post-flare loops is presented. The width of the current sheet is estimated to be about 3 $\times$ $10^{3}$ km. These observations are very useful to understand the process of solar eruptions.
△ Less
Submitted 8 January, 2018;
originally announced January 2018.
-
Successive X-class flares and coronal mass ejections driven by shearing motion and sunspot rotation in active region NOAA 12673
Authors:
X. L. Yan,
J. C. Wang,
G. M. Pan,
D. F. Kong,
Z. K. Xue,
L. H. Yang,
Q. L. Li,
X. S. Feng
Abstract:
We present a clear case study on the occurrence of two successive X-class flares including a decade-class flare (X9.3) and two coronal mass ejections (CMEs) triggered by shearing motion and sunspot rotation in active region NOAA 12673 on 2017 September 6. A shearing motion between the main sunspots with opposite polarities started on September 5 and even lasted after the second X-class flare on Se…
▽ More
We present a clear case study on the occurrence of two successive X-class flares including a decade-class flare (X9.3) and two coronal mass ejections (CMEs) triggered by shearing motion and sunspot rotation in active region NOAA 12673 on 2017 September 6. A shearing motion between the main sunspots with opposite polarities started on September 5 and even lasted after the second X-class flare on September 6. Moreover, the main sunspot with negative polarity rotated around its umbral center and another main sunspot with positive polarity also exhibited a slow rotation. The sunspot with negative polarity at the northwest of active region also began to rotate counter-clockwise before the onset of the first X-class flare. The successive formation and eruption of two S-shaped structures were closely related to the counter-clockwise rotation of three sunspots. It is also found that the rotation of sunspots is faster during four hours prior to the onset of the flares than the period before. The existence of a flux rope is found prior to the onset of two flares by using non-linear force free field extrapolation based on the vector magnetograms observed by SDO/HMI. These results suggest that shearing motion and sunspot rotation play an important role in the buildup of the free energy and the formation of flux ropes in the corona which produces solar flares and CMEs.
△ Less
Submitted 17 February, 2018; v1 submitted 7 January, 2018;
originally announced January 2018.
-
The eruption of a small-scale emerging flux rope as the driver of an M-class flare and a coronal mass ejection
Authors:
X. L. Yan,
C. W. Jiang,
Z. K. Xue,
J. C. Wang,
E. R. Priest,
L. H. Yang,
D. F. Kong,
W. D. Cao,
H. S. Ji
Abstract:
Solar flares and coronal mass ejections (CMEs) are the most powerful explosions in the Sun. They are major sources of potentially destructive space weather conditions. However, the possible causes of their initiation remain controversial. By using high resolution data observed by NST of BBSO, supplemented by Solar Dynamics Observatory (SDO) observations, we present unusual observations of a small-…
▽ More
Solar flares and coronal mass ejections (CMEs) are the most powerful explosions in the Sun. They are major sources of potentially destructive space weather conditions. However, the possible causes of their initiation remain controversial. By using high resolution data observed by NST of BBSO, supplemented by Solar Dynamics Observatory (SDO) observations, we present unusual observations of a small-scale emerging flux rope near a large sunspot, whose eruption produced an M-class flare and a coronal mass ejection. The presence of the small-scale flux rope was indicated by static nonlinear force free field (NLFFF) extrapolation as well as data-driven MHD modeling of the dynamic evolution of the coronal 3D magnetic field. During the emergence of the flux rope, rotation of satellite sunspots at the footpoints of the flux rope was observed. Meanwhile, the Lorentz force, magnetic energy, vertical current, and transverse fields were increasing during this phase. The free energy from the magnetic flux emergence and twisting magnetic fields is sufficient to power the M-class flare. These observations for the first time present the complete process from the emergence of the small-scale flux rope to the production of solar eruptions.
△ Less
Submitted 30 June, 2017;
originally announced July 2017.
-
The formation of an inverse S-shaped active-region filament driven by sunspot motion and magnetic reconnection
Authors:
X. L. Yan,
E. R. Priest,
Q. L. Guo,
Z. K. Xue,
J. C. Wang,
L. H. Yang
Abstract:
We present a detailed study of the formation of an inverse S-shaped filament prior to its eruption in active region NOAA 11884 from October 31 to November 2, 2013. In the initial stage, clockwise rotation of a small positive sunspot around the main negative trailing sunspot formed a curved filament. Then the small sunspot cancelled with negative magnetic flux to create a longer active-region filam…
▽ More
We present a detailed study of the formation of an inverse S-shaped filament prior to its eruption in active region NOAA 11884 from October 31 to November 2, 2013. In the initial stage, clockwise rotation of a small positive sunspot around the main negative trailing sunspot formed a curved filament. Then the small sunspot cancelled with negative magnetic flux to create a longer active-region filament with an inverse S-shape. At the cancellation site a brightening was observed in UV and EUV images and bright material was transferred to the filament. Later the filament erupted after cancellation of two opposite polarities under the upper part of the filament. Nonlinear force-free field (NLFFF) extrapolation of vector photospheric fields suggests that the filament may have a twisted structure, but this cannot be confirmed from the current observations.
△ Less
Submitted 15 September, 2016;
originally announced September 2016.
-
Fine-scale structures and material flows of quiescent filaments observed by New Vacuum Solar Telescope
Authors:
X. L. Yan,
Z. K. Xue,
Y. Y. Xiang,
L. H. Yang
Abstract:
Study on the small-scale structures and material flows of solar quiescent filaments is very important for understanding the formation and equilibrium of solar filaments. Using the high resolution Hα data observed by the New Vacuum Solar Telescope (NVST), we present the structures of the barbs and the material flows along the threads across the spine in two quiescent filaments on 2013 September 29…
▽ More
Study on the small-scale structures and material flows of solar quiescent filaments is very important for understanding the formation and equilibrium of solar filaments. Using the high resolution Hα data observed by the New Vacuum Solar Telescope (NVST), we present the structures of the barbs and the material flows along the threads across the spine in two quiescent filaments on 2013 September 29 and on 2012 November 2, respectively. During the evolution of the filament barb, several parallel tube-shaped structures formed and the width of the structures ranges from about 2.3 Mm to 3.3 Mm. The parallel tube-shaped structures merged together accompanied with the material flows from the spine to the barb. Moreover, the boundary between the barb and surrounding atmosphere is very neat. The counter-streaming flows were not found to appear alternately in the adjacent threads of the filament. However, the large-scale patchy counter-streaming flows are detected in the filament. The flows in one patch of the filament have the same direction and the flows in the adjacent patch have opposite directions. The patches of two opposite flows with a size of about ten arcseconds exhibited alternately along the spine of the filament. The velocity of these material flows ranges from 5.6 km/s to 15.0 km/s. The material flows along the threads of the filament did not change their direction for about two hours and fourteen minutes during the evolution of the filament. Our results confirm that the large-scale counter-streaming flows with the certain width along the threads of solar filaments exist and are well coaligned with the threads.
△ Less
Submitted 12 February, 2015;
originally announced February 2015.
-
Unwinding motion of a twisted active-region filament
Authors:
X. L. Yan,
Z. K. Xue,
J. H. Liu,
D. F. Kong,
C. L. Xu
Abstract:
To better understand the structures of active-region filaments and the eruption process, we study an active-region filament eruption in active region NOAA 11082 in detail on June 22, 2010. Before the filament eruption, the opposite unidirectional material flows appeared in succession along the spine of the filament. The rising of the filament triggered two B-class flares at the upper part of the f…
▽ More
To better understand the structures of active-region filaments and the eruption process, we study an active-region filament eruption in active region NOAA 11082 in detail on June 22, 2010. Before the filament eruption, the opposite unidirectional material flows appeared in succession along the spine of the filament. The rising of the filament triggered two B-class flares at the upper part of the filament. As the bright material was injected into the filament from the sites of the flares, the filament exhibited a rapid uplift accompanying the counterclockwise rotation of the filament body. From the expansion of the filament, we can see that the filament is consisted of twisted magnetic field lines. The total twist of the filament is at least 5$π$ obtained by using time slice method. According to the morphology change during the filament eruption, it is found that the active-region filament was a twisted flux rope and its unwinding motion was like a solar tornado. We also find that there was a continuous magnetic helicity injection before and during the filament eruption. It is confirmed that magnetic helicity can be transferred from the photosphere to the filament. Using the extrapolated potential fields, the average decay index of the background magnetic fields over the filament is 0.91. Consequently, these findings imply that the mechanism of solar filament eruption could be due to the kink instability and magnetic helicity accumulation.
△ Less
Submitted 8 October, 2014;
originally announced October 2014.
-
Eruptions of Two Coupled Filaments Observed by SDO, GONG and STEREO
Authors:
Z. K. Xue,
X. L. Yan,
Z. Q. Qu,
C. L. Xu,
L. Zhao
Abstract:
On 2012 July 11, two solar filaments were observed in the northeast of the solar disk and their eruptions due to the interaction between them are studied by using the data from the Solar Dynamics Observatory (SDO), Solar TErrestrial RElations Observatory (STEREO) and Global Oscillation Network Group (GONG). The eastern filament (F1) first erupted toward the northeast. During the eruption of F1, so…
▽ More
On 2012 July 11, two solar filaments were observed in the northeast of the solar disk and their eruptions due to the interaction between them are studied by using the data from the Solar Dynamics Observatory (SDO), Solar TErrestrial RElations Observatory (STEREO) and Global Oscillation Network Group (GONG). The eastern filament (F1) first erupted toward the northeast. During the eruption of F1, some plasma from F1 fell down and was injected to the North-East part of another filament (F2), and some plasma of F1 fell down to the northern region close to F2 and caused the plasma to brighten. Meanwhile, the North-East part of F2 first started to be active and rise, but did not erupt finally. Then the South-West part of F2 erupted successfully. Therefore, the F2's eruption is a partial filament eruption. Two associated CMEs related to the eruptions were observed by STEREO/COR1. We find two possible reasons that lead to the instability and the eruption of F2. One main reason is that the magnetic loops overlying the two filaments were partially opened by the eruptive F1 and resulted in the instability of F2. The other is that the downflows from F1 might break the stability of F2.
△ Less
Submitted 15 July, 2014;
originally announced July 2014.
-
Kink instability evidenced by analyzing the leg rotation of a filament
Authors:
X. L. Yan,
Z. K. Xue,
J. H. Liu,
L. Ma,
D. F. Kong,
Z. Q. Qu,
Z. Li
Abstract:
Kink instability is a possible mechanism for solar filament eruption. However, the twist of a solar filament is very difficult to directly measure from observation. In this paper, we carried out the measurement of the twist of a solar filament by analyzing its leg rotation. An inverse S-shaped filament in active region NOAA 11485 was observed by the Atmospheric Imaging Assembly (AIA) of Solar Dyna…
▽ More
Kink instability is a possible mechanism for solar filament eruption. However, the twist of a solar filament is very difficult to directly measure from observation. In this paper, we carried out the measurement of the twist of a solar filament by analyzing its leg rotation. An inverse S-shaped filament in active region NOAA 11485 was observed by the Atmospheric Imaging Assembly (AIA) of Solar Dynamics Observatory (SDO) on 2012 May 22. During its eruption, the leg of the filament exhibited a significant rotation motion. The 304 Å images were used to uncurl along the circles, whose centers are the axis of the filament's leg. The result shows that the leg of the filament rotated up to about 510 degrees (about 2.83$π$) around the axis of the filament within twenty-three minutes. The maximal rotation speed reached 100 degrees per minute (about 379.9 km/s at radius 18$^\prime$$^\prime$), which is the fastest rotation speed that has been reported. We also calculated the decay index along the polarity inversion line in this active region and found that the decline of the overlying field with height is not so fast enough to trigger the torus instability. According to the condition of kink instability, it is indicating that the kink instability is the trigger mechanism for the solar filament eruption.
△ Less
Submitted 31 December, 2013;
originally announced January 2014.
-
Interchange reconnection between an active region and a corona hole
Authors:
L. Ma,
Z. Q. Qu,
X. L. Yan,
Z. K. Xue
Abstract:
With the data from the Atmospheric Imaging Assembly (AIA) and the Helioseismic and Magnetic Imager (HMI) on board the Solar Dynamics Observatory (SDO), we present a magnetic interaction between an isolated coronal hole (CH) and an emerging active region (AR). The AR emerged nearby the CH and interacted with it. Bright loops constantly formed between them, which led to a continuous retreat of the C…
▽ More
With the data from the Atmospheric Imaging Assembly (AIA) and the Helioseismic and Magnetic Imager (HMI) on board the Solar Dynamics Observatory (SDO), we present a magnetic interaction between an isolated coronal hole (CH) and an emerging active region (AR). The AR emerged nearby the CH and interacted with it. Bright loops constantly formed between them, which led to a continuous retreat of the CH boundaries (CHBs). Meanwhile, two coronal dimmings respectively appeared at the negative polarity of the AR and the east boundary of the bright loops, and the AR was partly disturbed. Loop eruptions followed by a flare occurred in the AR. The interaction was also accompanied by many jets and an arc-shaped brightening that appeared to be observational signatures of magnetic reconnection at the CHBs. By comparing the observations with the derived coronal magnetic configuration, it is suggested that the interaction between the CH and the AR excellently fitted in with the model of interchange reconnection. It appears that our observations provide obvious evidences for interchange reconnection.
△ Less
Submitted 9 October, 2013;
originally announced October 2013.
-
Sunspot rotation, filament, and flare: The event on 2000 February 10
Authors:
X. L. Yan,
Z. Q. Qu,
D. F. Kong,
C. L. Xu
Abstract:
We find that a sunspot with positive polarity had an obvious counter-clockwise rotation and resulted in the formation and eruption of an inverse S-shaped filament in NOAA active region (AR) 08858 from 2000 February 9 to 10. The sunspot had two umbrae which rotated around each other by 195 degrees within about twenty-four hours. The average rotation rate was nearly 8 degrees per hour. The fastest r…
▽ More
We find that a sunspot with positive polarity had an obvious counter-clockwise rotation and resulted in the formation and eruption of an inverse S-shaped filament in NOAA active region (AR) 08858 from 2000 February 9 to 10. The sunspot had two umbrae which rotated around each other by 195 degrees within about twenty-four hours. The average rotation rate was nearly 8 degrees per hour. The fastest rotation in the photosphere took place during 14:00UT to 22:01UT on February 9, with the rotation rate of nearly 16 degrees per hour. The fastest rotation in the chromosphere and the corona took place during 15:28UT to 19:00UT on February 9, with the rotation rate of nearly 20 degrees per hour. Interestingly, the rapid increase of the positive magnetic flux just occurred during the fastest rotation of the rotating sunspot, the bright loop-shaped structure and the filament. During the sunspot rotation, the inverse S-shaped filament gradually formed in the EUV filament channel. The filament experienced two eruptions. In the first eruption, the filament rose quickly and then the filament loops carrying the cool and the hot material were seen to spiral into the sunspot counterclockwise. About ten minutes later, the filament became active and finally erupted. The filament eruption was accompanied with a C-class flare and a halo coronal mass ejection (CME). These results provide evidence that sunspot rotation plays an important role in the formation and eruption of the sigmoidal active-region filament.
△ Less
Submitted 21 May, 2012;
originally announced May 2012.
-
Relationship between eruptions of active-region filaments and associated flares and CMEs
Authors:
X. L. Yan,
Z. Q. Qu,
D. F. Kong
Abstract:
To better understand the dynamical process of active-region filament eruptions and associated flares and CMEs, we carried out a statistical study of 120 events observed by BBSO, TRACE, and t(SOHO/EIT) from 1998 to 2007 and combined filament observations with the NOAA's flare reports, MDI magnetograms, and LASCO data, to investigate the relationship between active-region filament eruptions and othe…
▽ More
To better understand the dynamical process of active-region filament eruptions and associated flares and CMEs, we carried out a statistical study of 120 events observed by BBSO, TRACE, and t(SOHO/EIT) from 1998 to 2007 and combined filament observations with the NOAA's flare reports, MDI magnetograms, and LASCO data, to investigate the relationship between active-region filament eruptions and other solar activities. We found that 115 out of 120 filament eruptions are associated with flares. 56 out of 105 filament eruptions are found to be associated with CMEs except for 15 events without corresponding LASCO data. We note the limitation of coronagraphs duo to geometry or sensitivity, leading to many smaller CMEs that are Earth-directed or well out of the plane of sky not being detected by near-Earth spacecraft. Excluding those without corresponding LASCO data, the CME association rate of active-region filament eruptions clearly increases with X-ray flare class from about 32% for C-class flares to 100% for X-class flares. The eruptions of active-region filaments associated with Halo CMEs are often accompanied by large flares. About 92% events associated with X-class flare are associated with Halo CMEs. Such a result is due to that the Earth-directed CMEs detected as Halo CMEs are often the larger CMEs and many of the smaller ones are not detected because of the geometry and low intensity. The average speed of the associated CMEs of filament eruptions increases with X-ray flare size from 563.7 km/s for C-class flares to 1506.6 km/s for X-class flares. Moreover, the magnetic emergence and cancellation play an important role in triggering filament eruptions. These findings may be instructive to not only in respect to the modeling of active-region filament eruptions but also in predicting flares and CMEs.
△ Less
Submitted 19 January, 2011;
originally announced January 2011.
-
The phase relation between sunspot numbers and soft X-ray flares
Authors:
X. L. Yan,
L. H. Deng,
Z. Q. Qu,
C. L. Xu
Abstract:
To better understand long-term flare activity, we present a statistical study on soft X-ray flares from May 1976 to May 2008. It is found that the smoothed monthly peak fluxes of C-class, M-class, and X-class flares have a very noticeable time lag of 13, 8, and 8 months in cycle 21 respectively with respect to the smoothed monthly sunspot numbers. There is no time lag between the sunspot numbers a…
▽ More
To better understand long-term flare activity, we present a statistical study on soft X-ray flares from May 1976 to May 2008. It is found that the smoothed monthly peak fluxes of C-class, M-class, and X-class flares have a very noticeable time lag of 13, 8, and 8 months in cycle 21 respectively with respect to the smoothed monthly sunspot numbers. There is no time lag between the sunspot numbers and M-class flares in cycle 22. However, there is a one-month time lag for C-class flares and a one-month time lead for X-class flares with regard to sunspot numbers in cycle 22. For cycle 23, the smoothed monthly peak fluxes of C-class, M-class, and X-class flares have a very noticeable time lag of one month, 5 months, and 21 months respectively with respect to sunspot numbers. If we take the three types of flares together, the smoothed monthly peak fluxes of soft X-ray flares have a time lag of 9 months in cycle 21, no time lag in cycle 22 and a characteristic time lag of 5 months in cycle 23 with respect to the smoothed monthly sunspot numbers. Furthermore, the correlation coefficients of the smoothed monthly peak fluxes of M-class and X-class flares and the smoothed monthly sunspot numbers are higher in cycle 22 than those in cycles 21 and 23. The correlation coefficients between the three kinds of soft X-ray flares in cycle 22 are higher than those in cycles 21 and 23. These findings may be instructive in predicting C-class, M-class, and X-class flares regarding sunspot numbers in the next cycle and the physical processes of energy storage and dissipation in the corona.
△ Less
Submitted 7 January, 2011; v1 submitted 3 January, 2011;
originally announced January 2011.
