-
Sub-arcsecond resolution imaging of M 51 with the International LOFAR Telescope
Authors:
Deepika Venkattu,
Peter Lundqvist,
Miguel Pérez-Torres,
Leah Morabito,
Javier Moldón,
John Conway,
Poonam Chandra,
Cyril Tasse
Abstract:
We present an International LOFAR Telescope sub-arcsecond resolution image of the nearby galaxy M 51 with a beam size of 0.436" x 0.366" and rms of 46 $μ$Jy. We compare this image with an European VLBI Network study of M 51, and discuss the supernovae in this galaxy, which have not yet been probed at these low radio frequencies. We find a flux density of 0.97 mJy for SN 2011dh in the ILT image, wh…
▽ More
We present an International LOFAR Telescope sub-arcsecond resolution image of the nearby galaxy M 51 with a beam size of 0.436" x 0.366" and rms of 46 $μ$Jy. We compare this image with an European VLBI Network study of M 51, and discuss the supernovae in this galaxy, which have not yet been probed at these low radio frequencies. We find a flux density of 0.97 mJy for SN 2011dh in the ILT image, which is about five times smaller than the flux density reported by the LOFAR Twometre Sky Survey at 6" resolution using the same dataset without the international stations. This difference makes evident the need for LOFAR international baselines to reliably obtain flux density measurements of compact objects in nearby galaxies. Our LOFAR flux density measurement of SN 2011dh directly translates into fitting the radio light curves for the supernova and constraining massloss rates of progenitor star. We do not detect two other supernovae in the same galaxy, SN 1994I and SN 2005cs, and our observations place limits on the evolution of both supernovae at radio wavelengths. We also discuss the radio emission from the centre of M 51, in which we detect the Active Galactic Nucleus and other parts of the nuclear emission in the galaxy, and a possible detection of Component N. We discuss a few other sources, including the detection of a High mass X-ray Binary not detected by LoTSS, but with a flux density in the ILT image that matches well with higher frequency catalogues.
△ Less
Submitted 5 July, 2023;
originally announced July 2023.
-
High-resolution imaging with the International LOFAR Telescope: Observations of the gravitational lenses MG 0751+2716 and CLASS B1600+434
Authors:
Shruti Badole,
Deepika Venkattu,
Neal Jackson,
Sarah Wallace,
Jiten Dhandha,
Philippa Hartley,
Christopher Riddell-Rovira,
Alice Townsend,
Leah K. Morabito,
J. P. McKean
Abstract:
We present Low-Frequency Array (LOFAR) telescope observations of the radio-loud gravitational lens systems MG 0751+2716 and CLASS B1600+434. These observations produce images at 300 milliarcseconds (mas) resolution at 150 MHz. In the case of MG 0751+2716, lens modelling is used to derive a size estimate of around 2 kpc for the low-frequency source, which is consistent with a previous 27.4 GHz stud…
▽ More
We present Low-Frequency Array (LOFAR) telescope observations of the radio-loud gravitational lens systems MG 0751+2716 and CLASS B1600+434. These observations produce images at 300 milliarcseconds (mas) resolution at 150 MHz. In the case of MG 0751+2716, lens modelling is used to derive a size estimate of around 2 kpc for the low-frequency source, which is consistent with a previous 27.4 GHz study in the radio continuum with Karl G. Jansky Very Large Array (VLA). This consistency implies that the low-frequency radio source is cospatial with the core-jet structure that forms the radio structure at higher frequencies, and no significant lobe emission or further components associated with star formation are detected within the magnified region of the lens. CLASS B1600+434 is a two-image lens where one of the images passes through the edge-on spiral lensing galaxy, and the low radio frequency allows us to derive limits on propagation effects, namely scattering, in the lensing galaxy. The observed flux density ratio of the two lensed images is 1.19 +/- 0.04 at an observed frequency of 150 MHz. The widths of the two images give an upper limit of 0.035 kpc m^-20/3 on the integrated scattering column through the galaxy at a distance approximately 1 kpc above its plane, under the assumption that image A is not affected by scattering. This is relatively small compared to limits derived through very long baseline interferometry (VLBI) studies of differential scattering in lens systems. These observations demonstrate that LOFAR is an excellent instrument for studying gravitational lenses. We also report on the inability to calibrate three further lens observations: two from early observations that have less well determined station calibration, and a third observation impacted by phase transfer problems.
△ Less
Submitted 16 August, 2021;
originally announced August 2021.
-
Sub-arcsecond imaging with the International LOFAR Telescope I. Foundational calibration strategy and pipeline
Authors:
L. K. Morabito,
N. J. Jackson,
S. Mooney,
F. Sweijen,
S. Badole,
P. Kukreti,
D. Venkattu,
C. Groeneveld,
A. Kappes,
E. Bonnassieux,
A. Drabent,
M. Iacobelli,
J. H. Croston,
P. N. Best,
M. Bondi,
J. R. Callingham,
J. E. Conway,
A. T. Deller,
M. J. Hardcastle,
J. P. McKean,
G. K. Miley,
J. Moldon,
H. J. A. Röttgering,
C. Tasse,
T. W. Shimwell
, et al. (49 additional authors not shown)
Abstract:
[abridged] The International LOFAR Telescope is an interferometer with stations spread across Europe. With baselines of up to ~2,000 km, LOFAR has the unique capability of achieving sub-arcsecond resolution at frequencies below 200 MHz, although this is technically and logistically challenging. Here we present a calibration strategy that builds on previous high-resolution work with LOFAR. We give…
▽ More
[abridged] The International LOFAR Telescope is an interferometer with stations spread across Europe. With baselines of up to ~2,000 km, LOFAR has the unique capability of achieving sub-arcsecond resolution at frequencies below 200 MHz, although this is technically and logistically challenging. Here we present a calibration strategy that builds on previous high-resolution work with LOFAR. We give an overview of the calibration strategy and discuss the special challenges inherent to enacting high-resolution imaging with LOFAR, and describe the pipeline, which is publicly available, in detail. We demonstrate the calibration strategy by using the pipeline on P205+55, a typical LOFAR Two-metre Sky Survey (LoTSS) pointing. We perform in-field delay calibration, solution referencing to other calibrators, self-calibration, and imaging of example directions of interest in the field. For this specific field and these ionospheric conditions, dispersive delay solutions can be transferred between calibrators up to ~1.5 degrees away, while phase solution transferral works well over 1 degree. We demonstrate a check of the astrometry and flux density scale. Imaging in 17 directions, the restoring beam is typically 0.3" x 0.2" although this varies slightly over the entire 5 square degree field of view. We achieve ~80 to 300 $μ$Jy/bm image rms noise, which is dependent on the distance from the phase centre; typical values are ~90 $μ$Jy/bm for the 8 hour observation with 48 MHz of bandwidth. Seventy percent of processed sources are detected, and from this we estimate that we should be able to image ~900 sources per LoTSS pointing. This equates to ~3 million sources in the northern sky, which LoTSS will entirely cover in the next several years. Future optimisation of the calibration strategy for efficient post-processing of LoTSS at high resolution (LoTSS-HR) makes this estimate a lower limit.
△ Less
Submitted 16 August, 2021;
originally announced August 2021.
