-
Deep sub-arcsecond widefield imaging of the Lockman Hole field at 144 MHz
Authors:
F. Sweijen,
R. J. van Weeren,
H. J. A. Röttgering,
L. K. Morabito,
N. Jackson,
A. R. Offringa,
S. van der Tol,
B. Veenboer,
J. B. R. Oonk,
P. N. Best,
M. Bondi,
T. W. Shimwell,
C. Tasse,
A. P. Thomson
Abstract:
High quality low-frequency radio surveys have the promise of advancing our understanding of many important topics in astrophysics, including the life cycle of active galactic nuclei (AGN), particle acceleration processes in jets, the history of star formation, and exoplanet magnetospheres. Currently leading low-frequency surveys reach an angular resolution of a few arcseconds. However, this resolu…
▽ More
High quality low-frequency radio surveys have the promise of advancing our understanding of many important topics in astrophysics, including the life cycle of active galactic nuclei (AGN), particle acceleration processes in jets, the history of star formation, and exoplanet magnetospheres. Currently leading low-frequency surveys reach an angular resolution of a few arcseconds. However, this resolution is not yet sufficient to study the more compact and distant sources in detail. Sub-arcsecond resolution is therefore the next milestone in advancing these fields. The biggest challenge at low radio frequencies is the ionosphere. If not adequately corrected for, ionospheric seeing blurs the images to arcsecond or even arcminute scales. Additionally, the required image size to map the degree-scale field of view of low-frequency radio telescopes at this resolution is far greater than what typical soft- and hardware is currently capable of handling. Here we present for the first time (to the best of our knowledge) widefield sub-arcsecond imaging at low radio frequencies. We derive ionospheric corrections in a few dozen individual directions and apply those during imaging efficiently using a recently developed imaging algorithm (arXiv:1407.1943, arXiv:1909.07226). We demonstrate our method by applying it to an eight hour observation of the International LOw Frequency ARray (LOFAR) Telescope (ILT) (arXiv:1305.3550). Doing so we have made a sensitive $7.4\ \mathrm{deg}^2$ $144\ \mathrm{MHz}$ map at a resolution of $0.3''$ reaching $25\ μ\mathrm{Jy\ beam}^{-1}$ near the phase centre. The estimated $250,000$ core hours used to produce this image, fit comfortably in the budget of available computing facilities. This result will enable future mapping of the entire northern low-frequency sky at sub-arcsecond resolution.
△ Less
Submitted 3 February, 2022;
originally announced February 2022.
-
Fourier-domain dedispersion
Authors:
C. G. Bassa,
J. W. Romein,
B. Veenboer,
S. van der Vlugt,
S. J. Wijnholds
Abstract:
We present and implement the concept of the Fourier-domain dedispersion (FDD) algorithm, a brute-force incoherent dedispersion algorithm. This algorithm corrects the frequency-dependent dispersion delays in the arrival time of radio emission from sources such as radio pulsars and fast radio bursts. Where traditional time-domain dedispersion algorithms correct time delays using time shifts, the FDD…
▽ More
We present and implement the concept of the Fourier-domain dedispersion (FDD) algorithm, a brute-force incoherent dedispersion algorithm. This algorithm corrects the frequency-dependent dispersion delays in the arrival time of radio emission from sources such as radio pulsars and fast radio bursts. Where traditional time-domain dedispersion algorithms correct time delays using time shifts, the FDD algorithm performs these shifts by applying phase rotations to the Fourier-transformed time-series data. Incoherent dedispersion to many trial dispersion measures (DMs) is compute, memory-bandwidth and I/O intensive and dedispersion algorithms have been implemented on Graphics Processing Units (GPUs) to achieve high computational performance. However, time-domain dedispersion algorithms have low arithmetic intensity and are therefore often memory-bandwidth limited. The FDD algorithm avoids this limitation and is compute limited, providing a path to exploit the potential of current and upcoming generations of GPUs. We implement the FDD algorithm as an extension of the DEDISP time-domain dedispersion software. We compare the performance and energy-to-completion of the FDD implementation using an NVIDIA Titan RTX GPU against the standard as well as an optimized version of DEDISP. The optimized implementation already provides a factor of 1.5 to 2 speedup at only 66% of the energy utilization compared to the original algorithm. We find that the FDD algorithm outperforms the optimized time-domain dedispersion algorithm by another 20% in performance and 5% in energy-to-completion when a large number of DMs (>=512) are required. The FDD algorithm provides additional performance improvements for FFT-based periodicity surveys of radio pulsars, as the FFT back to the time domain can be omitted. We expect that this computational performance gain will further improve in the future.
△ Less
Submitted 7 October, 2021;
originally announced October 2021.
-
Image Domain Gridding: a fast method for convolutional resampling of visibilities
Authors:
Sebastiaan van der Tol,
Bram Veenboer,
André R. Offringa
Abstract:
In radio astronomy obtaining a high dynamic range in synthesis imaging of wide fields requires a correction for time and direction-dependent effects. Applying direction-dependent correction can be done by either partitioning the image in facets and applying a direction-independent correction per facet, or by including the correction in the gridding kernel (AW-projection).
An advantage of AW-proj…
▽ More
In radio astronomy obtaining a high dynamic range in synthesis imaging of wide fields requires a correction for time and direction-dependent effects. Applying direction-dependent correction can be done by either partitioning the image in facets and applying a direction-independent correction per facet, or by including the correction in the gridding kernel (AW-projection).
An advantage of AW-projection over faceting is that the effectively applied beam is a sinc interpolation of the sampled beam, where the correction applied in the faceting approach is a discontinuous piece wise constant beam. However, AW-projection quickly becomes prohibitively expensive when the corrections vary over short time scales. This occurs for example when ionospheric effects are included in the correction. The cost of the frequent recomputation of the oversampled convolution kernels then dominates the total cost of gridding.
Image domain gridding is a new approach that avoids the costly step of computing oversampled convolution kernels. Instead low-resolution images are made directly for small groups of visibilities which are then transformed and added to the large $uv$ grid. The computations have a simple, highly parallel structure that maps very well onto massively parallel hardware such as graphical processing units (GPUs). Despite being more expensive in pure computation count, the throughput is comparable to classical W-projection. The accuracy is close to classical gridding with a continuous convolution kernel. Compared to gridding methods that use a sampled convolution function, the new method is more accurate. Hence the new method is at least as fast and accurate as classical W-projection, while allowing for the correction for quickly varying direction-dependent effects.
△ Less
Submitted 16 September, 2019;
originally announced September 2019.
-
Precision requirements for interferometric gridding in 21-cm power spectrum analysis
Authors:
A. R. Offringa,
F. Mertens,
S. van der Tol,
B. Veenboer,
B. K. Gehlot,
L. V. E. Koopmans,
M. Mevius
Abstract:
We analyse the accuracy of radio interferometric gridding of visibilities with the aim to quantify the Epoch of Reionization (EoR) 21-cm power spectrum bias caused by gridding, ultimately to determine the suitability of different imaging algorithms and gridding settings for 21-cm power spectrum analysis. We simulate realistic LOFAR data, and construct power spectra with convolutional gridding and…
▽ More
We analyse the accuracy of radio interferometric gridding of visibilities with the aim to quantify the Epoch of Reionization (EoR) 21-cm power spectrum bias caused by gridding, ultimately to determine the suitability of different imaging algorithms and gridding settings for 21-cm power spectrum analysis. We simulate realistic LOFAR data, and construct power spectra with convolutional gridding and w-stacking, w-projection, image domain gridding and without w-correction. These are compared against directly Fourier transformed data. The influence of oversampling, kernel size, w-quantization, kernel windowing function and image padding are quantified. The gridding excess power is measured with a foreground subtraction strategy, for which foregrounds have been subtracted using Gaussian progress regression, as well as with a foreground avoidance strategy.
Constructing a power spectrum that has a bias significantly lower compared to the expected EoR signals is possible with the tested methods, but requires a kernel oversampling factor > 4000 and, when using w-correction, > 500 w-quantization levels. These values are higher than typical values used for imaging, but are computationally feasible. The kernel size and padding factor parameters are less crucial. Among the tested methods, image domain gridding shows the highest accuracy with the lowest imaging time.
LOFAR 21-cm power spectrum results are not affected by gridding. Image domain gridding is overall the most suitable algorithm for 21-cm EoR experiments, including for future SKA EoR analyses. Nevertheless, convolutional gridding with tuned parameters results in sufficient accuracy. This holds also for w-stacking for wide-field imaging. The w-projection algorithm is less suitable because of the kernel oversampling requirements, and a faceting approach is unsuitable due to the resulting spatial discontinuities.
△ Less
Submitted 29 August, 2019;
originally announced August 2019.
-
Characterising radio telescope software with the Workload Characterisation Framework
Authors:
Y. G. Grange,
R. Lakhoo,
M. Petschow,
C. Wu,
B. Veenboer,
I. Emsley,
T. J. Dijkema,
A. P. Mechev,
G. Mariani
Abstract:
We present a modular framework, the Workload Characterisation Framework (WCF), that is developed to reproducibly obtain, store and compare key characteristics of radio astronomy processing software. As a demonstration, we discuss the experiences using the framework to characterise a LOFAR calibration and imaging pipeline.
We present a modular framework, the Workload Characterisation Framework (WCF), that is developed to reproducibly obtain, store and compare key characteristics of radio astronomy processing software. As a demonstration, we discuss the experiences using the framework to characterise a LOFAR calibration and imaging pipeline.
△ Less
Submitted 1 December, 2016;
originally announced December 2016.
