-
Observations of the Current Sheet Heating in X-ray during a Solar Flare
Authors:
Anton Reva,
Sergey Bogachev,
Ivan Loboda,
Artem Ulyanov,
Alexey Kirichenko
Abstract:
In the solar corona, magnetic reconnection occurs due to the finite resistivity of the plasma. At the same time, resistivity leads to ohmic heating. Therefore, the reconnecting current sheet should heat the surrounding plasma. This paper presents experimental evidence of such plasma heating caused by magnetic reconnection. We observed the effect during a C1.4 solar flare on 16 February 2003 at the…
▽ More
In the solar corona, magnetic reconnection occurs due to the finite resistivity of the plasma. At the same time, resistivity leads to ohmic heating. Therefore, the reconnecting current sheet should heat the surrounding plasma. This paper presents experimental evidence of such plasma heating caused by magnetic reconnection. We observed the effect during a C1.4 solar flare on 16 February 2003 at the active region NOAA 10278, near the solar limb. Thanks to such a location, we successfully identified all the principal elements of the flare: the flare arcade, the fluxrope, and, most importantly, the presumed position of the current sheet. By analyzing the monochromatic X-ray images of the Sun obtained by the CORONAS-F/SPIRIT instrument in the Mg XII 8.42 A spectral line, we detected a high-temperature ($T \geq$ 4 MK) emission at the predicted location of the current sheet. The high-temperature emission appeared during the CME impulsive acceleration phase. We believe that this additionally confirms that the plasma heating around the current sheet and magnetic reconnection inside the current sheet are strongly connected.
△ Less
Submitted 4 June, 2023;
originally announced June 2023.
-
A compact instrument for gamma-ray burst detection on a CubeSat platform II: Detailed design, assembly and validation
Authors:
David Murphy,
Alexey Ulyanov,
Sheila McBreen,
Joseph Mangan,
Rachel Dunwoody,
Maeve Doyle,
Conor O'Toole,
Joseph Thompson,
Jack Reilly,
Sarah Walsh,
Brian Shortt,
Antonio Martin-Carrillo,
Lorraine Hanlon
Abstract:
The Gamma-ray Module, GMOD, is a miniaturised novel gamma-ray detector which will be the primary scientific payload on the Educational Irish Research Satellite (EIRSAT-1) 2U CubeSat mission. GMOD comprises a compact (25mm $\times$ 25mm $\times$ 40mm) cerium bromide scintillator coupled to a tiled array of 4$\times$4 silicon photomultipliers, with front-end readout provided by the IDE3380 SIPHRA. T…
▽ More
The Gamma-ray Module, GMOD, is a miniaturised novel gamma-ray detector which will be the primary scientific payload on the Educational Irish Research Satellite (EIRSAT-1) 2U CubeSat mission. GMOD comprises a compact (25mm $\times$ 25mm $\times$ 40mm) cerium bromide scintillator coupled to a tiled array of 4$\times$4 silicon photomultipliers, with front-end readout provided by the IDE3380 SIPHRA. This paper presents the detailed GMOD design and the accommodation of the instrument within the restrictive CubeSat form factor. The electronic and mechanical interfaces are compatible with many off-the-shelf CubeSat systems and structures. The energy response of the GMOD engineering qualification model has been determined using radioactive sources, and an energy resolution of 5.4% at 662keV has been measured.
EIRSAT-1 will perform on-board processing of GMOD data. Trigger results, including light-curves and spectra, will be incorporated into the spacecraft beacon and transmitted continuously. Inexpensive hardware can be used to decode the beacon signal, making the data accessible to a wide community.
GMOD will have scientific capability for the detection of gamma-ray bursts, in addition to the educational and technology demonstration goals of the EIRSAT-1 mission. The detailed design and measurements to date demonstrate the capability of GMOD in low Earth orbit, the scalability of the design for larger CubeSats and as an element of future large gamma-ray missions.
△ Less
Submitted 7 March, 2022;
originally announced March 2022.
-
Embedded Firmware Development for a Novel CubeSat Gamma-Ray Detector
Authors:
Joseph Mangan,
David Murphy,
Rachel Dunwoody,
Maeve Doyle,
Alexey Ulyanov,
Lorraine Hanlon,
Brian Shortt,
Sheila McBreen,
Masoud Emam,
Jessica Erkal,
Joe Flanagan,
Gianluca Fontanesi,
Andrew Gloster,
Conor O'Toole,
Favour Okosun,
Rakhi RajagopalanNair,
Jack Reilly,
Lána Salmon,
Daire Sherwin,
Joseph Thompson,
Sarah Walsh,
Daithí de Faoite,
Mike Hibbett,
Umair Javaid,
Fergal Marshall
, et al. (4 additional authors not shown)
Abstract:
The Gamma-ray Module (GMOD) is an experiment designed for the detection of gamma-ray bursts in low Earth orbit as the principal scientific payload on a 2-U CubeSat, EIRSAT-1. GMOD comprises a cerium bromide scintillator coupled to silicon photomultipliers which are processed and digitised by a bespoke ASIC. Custom firmware on the GMOD motherboard has been designed, implemented and tested for the M…
▽ More
The Gamma-ray Module (GMOD) is an experiment designed for the detection of gamma-ray bursts in low Earth orbit as the principal scientific payload on a 2-U CubeSat, EIRSAT-1. GMOD comprises a cerium bromide scintillator coupled to silicon photomultipliers which are processed and digitised by a bespoke ASIC. Custom firmware on the GMOD motherboard has been designed, implemented and tested for the MSP430 microprocessor which manages the experiment including readout, storage and configuration of the system. The firmware has been verified in a series of experiments testing the response over a realistic range of input detector trigger frequencies from 50Hz to 1kHz for the primary time tagged event (TTE) data. The power consumption and ability of the firmware to successfully receive and transmit the packets to the on-board computer was investigated. The experiment demonstrated less than 1% loss of packets up to 1kHz for the standard transfer mode with the power not exceeding 31mW. The transfer performance and power consumption demonstrated are within the required range of this CubeSat instrument.
△ Less
Submitted 4 November, 2021;
originally announced November 2021.
-
A compact instrument for gamma-ray burst detection on a CubeSat platform I: Design drivers and expected performance
Authors:
David Murphy,
Alexey Ulyanov,
Sheila McBreen,
Maeve Doyle,
Rachel Dunwoody,
Joseph Mangan,
Joseph Thompson,
Brian Shortt,
Antonio Martin-Carrillo,
Lorraine Hanlon
Abstract:
The Educational Irish Research Satellite 1 (EIRSAT-1) is a 2U CubeSat being developed under ESA's Fly Your Satellite! programme. The project has many aspects, which are primarily educational, but also include space qualification of new detector technologies for gamma-ray astronomy and the detection of gamma-ray bursts (GRBs). The Gamma-ray Module (GMOD), the main mission payload, is a small gamma-…
▽ More
The Educational Irish Research Satellite 1 (EIRSAT-1) is a 2U CubeSat being developed under ESA's Fly Your Satellite! programme. The project has many aspects, which are primarily educational, but also include space qualification of new detector technologies for gamma-ray astronomy and the detection of gamma-ray bursts (GRBs). The Gamma-ray Module (GMOD), the main mission payload, is a small gamma-ray spectrometer comprising a 25 mm $\times$ 25 mm $\times$ 40 mm cerium bromide scintillator coupled to an array of 16 silicon photomultipliers. The readout is provided by IDE3380 (SIPHRA), a low-power and radiation tolerant readout ASIC. GMOD will detect gamma-rays and measure their energies in a range from tens of keV to a few MeV.
Monte Carlo simulations were performed using the Medium Energy Gamma-ray Astronomy Library to evaluate GMOD's capability for the detection of GRBs in low Earth orbit. The simulations used a detailed mass model of the full spacecraft derived from a very high-fidelity 3D CAD model. The sky-average effective area of GMOD on board EIRSAT-1 was found to be 10 cm$^2$ at 120 keV. The instrument is expected to detect between 11 and 14 GRBs, at a significance greater than 10$σ$ (and up to 32 at 5$σ$), during a nominal one-year mission. The shape of the scintillator in GMOD results in omni-directional sensitivity which allows for a nearly all-sky field of view.
△ Less
Submitted 18 August, 2021;
originally announced August 2021.
-
Assembly, Integration, and Verification Activities for a 2U CubeSat, EIRSAT-1
Authors:
Sarah Walsh,
David Murphy,
Maeve Doyle,
Joseph Thompson,
Rachel Dunwoody,
Masoud Emam,
Jessica Erkal,
Joe Flanagan,
Gianluca Fontanesi,
Andrew Gloster,
Joe Mangan,
Conor O'Toole,
Favour Okosun,
Rakhi Rajagopalan Nair,
Jack Reilly,
Lána Salmon,
Daire Sherwin,
Paul Cahill,
Daithí de Faoite,
Umair Javaid,
Lorraine Hanlon,
David McKeown,
William O'Connor,
Kenneth Stanton,
Alexei Ulyanov
, et al. (2 additional authors not shown)
Abstract:
The Educational Irish Research Satellite, EIRSAT-1, is a project developed by students at University College Dublin that aims to design, build, and launch Ireland's first satellite. EIRSAT-1 is a 2U CubeSat incorporating three novel payloads; GMOD, a gamma-ray detector, EMOD, a thermal coating management experiment, and WBC, a novel attitude control algorithm. The EIRSAT-1 project is carried out w…
▽ More
The Educational Irish Research Satellite, EIRSAT-1, is a project developed by students at University College Dublin that aims to design, build, and launch Ireland's first satellite. EIRSAT-1 is a 2U CubeSat incorporating three novel payloads; GMOD, a gamma-ray detector, EMOD, a thermal coating management experiment, and WBC, a novel attitude control algorithm. The EIRSAT-1 project is carried out with the support of the Education Office of the European Space Agency, under the educational Fly your Satellite! programme. The Assembly, Integration and Verification plan for EIRSAT-1 is central to the philosophy and the development of the spacecraft. The model philosophy employed for the project is known as the 'prototype' approach in which two models of the spacecraft are assembled; an Engineering Qualification Model (EQM) and a Flight Model (FM). The payloads, GMOD and EMOD, and the Antenna Deployment Module (ADM) platform element warrant a Development Model in addition to an EQM and a FM, as they have been designed and developed in-house. After successful completion of the Critical Design Review and Ambient Test Readiness Review phases of the project, the EQM of EIRSAT-1 will be assembled and integrated. After assembly and integration of the EQM, the project will begin the ambient test campaign, in which the EQM undergoes ambient functional and mission testing. This work details the preparation and execution of the assembly, integration, and verification activities of EIRSAT-1 EQM.
△ Less
Submitted 20 October, 2020;
originally announced October 2020.
-
Flight Software Development for the EIRSAT-1 Mission
Authors:
Maeve Doyle,
Andrew Gloster,
Conor O'Toole,
Joseph Mangan,
David Murphy,
Rachel Dunwoody,
Masoud Emam,
Jessica Erkal,
Joe Flanaghan,
Gianluca Fontanesi,
Favour Okosun,
Rakhi Rajagopalan Nair,
Jack Reilly,
Lána Salmon,
Daire Sherwin,
Joseph Thompson,
Sarah Walsh,
Daithí de Faoite,
Umair Javaid,
Sheila McBreen,
David McKeown,
Derek O'Callaghan,
William O'Connor,
Kenneth Stanton,
Alexei Ulyanov
, et al. (2 additional authors not shown)
Abstract:
The Educational Irish Research Satellite, known as EIRSAT-1, is a student-led project to design, build, test and launch Ireland's first satellite. The on-board software for this mission is being developed using Bright Ascension's GenerationOne Flight Software Development Kit. This paper provides an overview of this kit and of EIRSAT-1's on-board software design. Drawing on the team's contrasting e…
▽ More
The Educational Irish Research Satellite, known as EIRSAT-1, is a student-led project to design, build, test and launch Ireland's first satellite. The on-board software for this mission is being developed using Bright Ascension's GenerationOne Flight Software Development Kit. This paper provides an overview of this kit and of EIRSAT-1's on-board software design. Drawing on the team's contrasting experience with writing entirely custom firmware for the mission's science payloads, this work discusses the impact of using a kit on the software development process. The challenges associated with the educational nature of this project are the focus of this discussion. The objective of this paper is to provide useful information for other CubeSat teams assessing software development options.
△ Less
Submitted 20 August, 2020;
originally announced August 2020.
-
Radiation Damage Study of SensL J-Series Silicon Photomultipliers Using 101.4 MeV Protons
Authors:
Alexei Ulyanov,
David Murphy,
Joseph Mangan,
Viyas Gupta,
Wojciech Hajdas,
Daithi de Faoite,
Brian Shortt,
Lorraine Hanlon,
Sheila McBreen
Abstract:
Radiation damage of J-series silicon photomultipliers (SiPMs) has been studied in the context of using these photodetectors in future space-borne scintillation detectors. Several SiPM samples were exposed to 101.4 MeV protons, with 1 MeV neutron equivalent fluence ranging from 1.27*10^8 n/cm^2 to 1.23*10^10 n/cm^2 . After the irradiation, the SiPMs experienced a large increase in the dark current…
▽ More
Radiation damage of J-series silicon photomultipliers (SiPMs) has been studied in the context of using these photodetectors in future space-borne scintillation detectors. Several SiPM samples were exposed to 101.4 MeV protons, with 1 MeV neutron equivalent fluence ranging from 1.27*10^8 n/cm^2 to 1.23*10^10 n/cm^2 . After the irradiation, the SiPMs experienced a large increase in the dark current and noise, which may pose problems for long-running space missions in terms of power consumption, thermal control and detection of low-energy events. Measurements performed with a CeBr3 scintillator crystal showed that after exposure to 1.23*10^10 n/cm^2 and following room-temperature annealing, the dark noise of a single 6 mm square SiPM at room temperature increased from 0.1 keV to 2 keV. Because of the large SiPM noise, the gamma-ray detection threshold increased to approximately 20 keV for a CeBr3 detector using a 4-SiPM array and 40 keV for a detector using a 16-SiPM array. Only a small effect of the proton irradiation on the average detector signal was observed, suggesting no or little change to the SiPM gain and photon detection efficiency.
△ Less
Submitted 21 July, 2020;
originally announced July 2020.
-
All-Sky-ASTROGAM: The MeV Gamma-Ray Companion to Multimessenger Astronomy
Authors:
V. Tatischeff,
A. De Angelis,
M. Tavani,
U. Oberlack,
R. Walter,
G. Ambrosi,
A. Argan,
P. von Ballmoos,
S. Brandt,
A. Bulgarelli,
A. Bykov,
S. Ciprini,
D. Dominis Prester,
V. Fioretti,
I. Grenier,
L. Hanlon,
D. H. Hartmann,
M. Hernanz,
J. Isern,
G. Kanbach,
I. Kuvvetli,
P. Laurent,
M. N. Mazziotta,
J. McEnery,
S. Mereghetti
, et al. (11 additional authors not shown)
Abstract:
All-Sky-ASTROGAM is a gamma-ray observatory operating in a broad energy range, 100 keV to a few hundred MeV, recently proposed as the "Fast" (F) mission of the European Space Agency for a launch in 2028 to an L2 orbit. The scientific payload is composed of a unique gamma-ray imaging monitor for astrophysical transients, with very large field of view (almost 4$π$ sr) and optimal sensitivity to dete…
▽ More
All-Sky-ASTROGAM is a gamma-ray observatory operating in a broad energy range, 100 keV to a few hundred MeV, recently proposed as the "Fast" (F) mission of the European Space Agency for a launch in 2028 to an L2 orbit. The scientific payload is composed of a unique gamma-ray imaging monitor for astrophysical transients, with very large field of view (almost 4$π$ sr) and optimal sensitivity to detect bright and intermediate flux sources (gamma-ray bursts, active galactic nuclei, X-ray binaries, supernovae and novae) at different timescales ranging from seconds to months. The mission will operate in a maturing gravitational wave and multi-messenger epoch, opening up new and exciting synergies.
△ Less
Submitted 19 May, 2019;
originally announced May 2019.
-
Estimate of the Upper Limit on Hot Plasma Differential Emission Measure (DEM) in Non-Flaring Active Regions and Nanoflare Frequency Based on the Mg XII Spectroheliograph Data from CORONAS-F/SPIRIT
Authors:
Anton Reva,
Artem Ulyanov,
Alexey Kirichenko,
Sergey Bogachev,
Sergey Kuzin
Abstract:
The nanoflare-heating theory predicts steady hot plasma emission in the non-flaring active regions. It is hard to find this emission with conventional non-monochromatic imagers (such as Atmospheric Imaging Assembly or X-Ray Telescope), because their images contain a cool temperature background. In this work, we search for hot plasma in non-flaring active regions using the Mg XII spectroheliograph…
▽ More
The nanoflare-heating theory predicts steady hot plasma emission in the non-flaring active regions. It is hard to find this emission with conventional non-monochromatic imagers (such as Atmospheric Imaging Assembly or X-Ray Telescope), because their images contain a cool temperature background. In this work, we search for hot plasma in non-flaring active regions using the Mg XII spectroheliograph onboard Complex Orbital Observations Near-Earth of Activity on the Sun (CORONAS)-F/SPectroheliographIc X-ray Imaging Telescope (SPIRIT). This instrument acquired monochromatic images of the solar corona in the Mg XII 8.42 Åline, which emits only at temperatures higher than 4 MK. The Mg XII images contain the signal only from hot plasma without any low-temperature background. We studied the hot plasma in active regions using the SPIRIT data from 18-28 February 2002. During this period, the Mg XII spectroheliograph worked with a 105-second cadence almost without data gaps. The hot plasma was observed only in the flaring active regions. We do not observe any hot plasma in non-flaring active regions. The hot plasma column emission measure in the non-flaring active region should not exceed $3 \times 10^{24}$ cm$^{-5}$. The hot Differential Emission Measure (DEM) is less than 0.01 % of the DEM of the main temperature component. Absence of Mg XII emission in the non-flaring active regions can be explained by weak and frequent nanoflares (delay less than 500 seconds) or by very short and intense nanoflares that lead to non-equilibrium ionization.
△ Less
Submitted 11 October, 2018;
originally announced October 2018.
-
The e-ASTROGAM gamma-ray space observatory for the multimessenger astronomy of the 2030s
Authors:
V. Tatischeff,
A. De Angelis,
M. Tavani,
I. Grenier,
U. Oberlack,
L. Hanlon,
R. Walter,
A. Argan,
P. von Ballmoos,
A. Bulgarelli,
I. Donnarumma,
M. Hernanz,
I. Kuvvetli,
M. Mallamaci,
M. Pearce,
A. Zdziarski,
A. Aboudan,
M. Ajello,
G. Ambrosi,
D. Bernard,
E. Bernardini,
V. Bonvicini,
A. Brogna,
M. Branchesi,
C. Budtz-Jorgensen
, et al. (52 additional authors not shown)
Abstract:
e-ASTROGAM is a concept for a breakthrough observatory space mission carrying a gamma-ray telescope dedicated to the study of the non-thermal Universe in the photon energy range from 0.15 MeV to 3 GeV. The lower energy limit can be pushed down to energies as low as 30 keV for gamma-ray burst detection with the calorimeter. The mission is based on an advanced space-proven detector technology, with…
▽ More
e-ASTROGAM is a concept for a breakthrough observatory space mission carrying a gamma-ray telescope dedicated to the study of the non-thermal Universe in the photon energy range from 0.15 MeV to 3 GeV. The lower energy limit can be pushed down to energies as low as 30 keV for gamma-ray burst detection with the calorimeter. The mission is based on an advanced space-proven detector technology, with unprecedented sensitivity, angular and energy resolution, combined with remarkable polarimetric capability. Thanks to its performance in the MeV-GeV domain, substantially improving its predecessors, e-ASTROGAM will open a new window on the non-thermal Universe, making pioneering observations of the most powerful Galactic and extragalactic sources, elucidating the nature of their relativistic outflows and their effects on the surroundings. With a line sensitivity in the MeV energy range one to two orders of magnitude better than previous and current generation instruments, e-ASTROGAM will determine the origin of key isotopes fundamental for the understanding of supernova explosion and the chemical evolution of our Galaxy. The mission will be a major player of the multiwavelength, multimessenger time-domain astronomy of the 2030s, and provide unique data of significant interest to a broad astronomical community, complementary to powerful observatories such as LISA, LIGO, Virgo, KAGRA, the Einstein Telescope and the Cosmic Explorer, IceCube-Gen2 and KM3NeT, SKA, ALMA, JWST, E-ELT, LSST, Athena, and the Cherenkov Telescope Array.
△ Less
Submitted 13 July, 2018; v1 submitted 16 May, 2018;
originally announced May 2018.
-
Observations of the Coronal Mass Ejection with a Complex Acceleration Profile
Authors:
A. A Reva,
A. S. Kirichenko,
A. S. Ulyanov,
S. V. Kuzin
Abstract:
We study the coronal mass ejection (CME) with a complex acceleration profile. The event occurred on April 23, 2009. It had an impulsive acceleration phase, an impulsive deceleration phase, and a second impulsive acceleration phase. During its evolution, the CME showed signatures of different acceleration mechanisms: kink instability, prominence drainage, flare reconnection, and a CME-CME collision…
▽ More
We study the coronal mass ejection (CME) with a complex acceleration profile. The event occurred on April 23, 2009. It had an impulsive acceleration phase, an impulsive deceleration phase, and a second impulsive acceleration phase. During its evolution, the CME showed signatures of different acceleration mechanisms: kink instability, prominence drainage, flare reconnection, and a CME-CME collision. The special feature of the observations is the usage of the TESIS EUV telescope. The instrument could image the solar corona in the Fe 171 Å line up to a distance of 2 $R_\odot$ from the center of the Sun. This allows us to trace the CME up to the LASCO/C2 field of view without losing the CME from sight. The onset of the CME was caused by kink instability. The mass drainage occurred after the kink instability. The mass drainage played only an auxiliary role: it decreased the CME mass, which helped to accelerate the CME. The first impulsive acceleration phase was caused by the flare reconnection. We observed the two ribbon flare and an increase of the soft X-ray flux during the first impulsive acceleration phase. The impulsive deceleration and the second impulsive acceleration phases were caused by the CME-CME collision. The studied event shows that CMEs are complex phenomena that cannot be explained with only one acceleration mechanism. We should seek a combination of different mechanisms that accelerate CMEs at different stages of their evolution.
△ Less
Submitted 18 December, 2017;
originally announced December 2017.
-
Science with e-ASTROGAM (A space mission for MeV-GeV gamma-ray astrophysics)
Authors:
A. De Angelis,
V. Tatischeff,
I. A. Grenier,
J. McEnery,
M. Mallamaci,
M. Tavani,
U. Oberlack,
L. Hanlon,
R. Walter,
A. Argan,
P. Von Ballmoos,
A. Bulgarelli,
A. Bykov,
M. Hernanz,
G. Kanbach,
I. Kuvvetli,
M. Pearce,
A. Zdziarski,
J. Conrad,
G. Ghisellini,
A. Harding,
J. Isern,
M. Leising,
F. Longo,
G. Madejski
, et al. (226 additional authors not shown)
Abstract:
e-ASTROGAM (enhanced ASTROGAM) is a breakthrough Observatory space mission, with a detector composed by a Silicon tracker, a calorimeter, and an anticoincidence system, dedicated to the study of the non-thermal Universe in the photon energy range from 0.3 MeV to 3 GeV - the lower energy limit can be pushed to energies as low as 150 keV for the tracker, and to 30 keV for calorimetric detection. The…
▽ More
e-ASTROGAM (enhanced ASTROGAM) is a breakthrough Observatory space mission, with a detector composed by a Silicon tracker, a calorimeter, and an anticoincidence system, dedicated to the study of the non-thermal Universe in the photon energy range from 0.3 MeV to 3 GeV - the lower energy limit can be pushed to energies as low as 150 keV for the tracker, and to 30 keV for calorimetric detection. The mission is based on an advanced space-proven detector technology, with unprecedented sensitivity, angular and energy resolution, combined with polarimetric capability. Thanks to its performance in the MeV-GeV domain, substantially improving its predecessors, e-ASTROGAM will open a new window on the non-thermal Universe, making pioneering observations of the most powerful Galactic and extragalactic sources, elucidating the nature of their relativistic outflows and their effects on the surroundings. With a line sensitivity in the MeV energy range one to two orders of magnitude better than previous generation instruments, e-ASTROGAM will determine the origin of key isotopes fundamental for the understanding of supernova explosion and the chemical evolution of our Galaxy. The mission will provide unique data of significant interest to a broad astronomical community, complementary to powerful observatories such as LIGO-Virgo-GEO600-KAGRA, SKA, ALMA, E-ELT, TMT, LSST, JWST, Athena, CTA, IceCube, KM3NeT, and LISA.
△ Less
Submitted 8 August, 2018; v1 submitted 3 November, 2017;
originally announced November 2017.
-
e-ASTROGAM mission: a major step forward for gamma-ray polarimetry
Authors:
Vincent Tatischeff,
Alessandro De Angelis,
Christian Gouiffès,
Lorraine Hanlon,
Philippe Laurent,
Grzegorz Madejski,
Marco Tavani,
Alexei Ulyanov
Abstract:
e-ASTROGAM is a gamma-ray space mission proposed for the fifth Medium-size mission (M5) of the European Space Agency. It is dedicated to the study of the non-thermal Universe in the photon energy range from ~0.15 MeV to 3 GeV with unprecedented sensitivity, angular and energy resolution, together with a groundbreaking capability for gamma-ray polarimetric measurements over its entire bandwidth. We…
▽ More
e-ASTROGAM is a gamma-ray space mission proposed for the fifth Medium-size mission (M5) of the European Space Agency. It is dedicated to the study of the non-thermal Universe in the photon energy range from ~0.15 MeV to 3 GeV with unprecedented sensitivity, angular and energy resolution, together with a groundbreaking capability for gamma-ray polarimetric measurements over its entire bandwidth. We discuss here the main polarization results expected at low energies, between 150 keV and 5 MeV, using Compton interactions in the e-ASTROGAM instrument, from observations of active galactic nuclei, gamma-ray bursts, microquasars, and the Crab pulsar and nebula. The anticipated performance of the proposed observatory for polarimetry is illustrated by simulations of the polarization signals expected from various sources. We show that polarimetric analyses with e-ASTROGAM should provide definitive insight into the geometry, magnetization and content of the high-energy plasmas found in the emitting sources, as well as on the processes of radiation of these plasmas.
△ Less
Submitted 9 November, 2017; v1 submitted 21 June, 2017;
originally announced June 2017.
-
Nonlinear evolution of short-wavelength torsional Alfven waves
Authors:
S. V. Shestov,
V. M. Nakariakov,
A. S. Ulyanov,
A. A. Reva,
S. V. Kuzin
Abstract:
We analyse nonlinear evolution of torsional Alfvén waves in a straight magnetic flux tube filled in with a low-$β$ plasma, and surrounded with a plasma of lower density. Such magnetic tubes model, in particular, a segment of a coronal loop or a polar plume. The wavelength is taken comparable to the tube radius. We perform numerical simulation of the wave propagation using ideal magnetohydrodynamic…
▽ More
We analyse nonlinear evolution of torsional Alfvén waves in a straight magnetic flux tube filled in with a low-$β$ plasma, and surrounded with a plasma of lower density. Such magnetic tubes model, in particular, a segment of a coronal loop or a polar plume. The wavelength is taken comparable to the tube radius. We perform numerical simulation of the wave propagation using ideal magnetohydrodynamics. We find that a torsional wave nonlinearly induces three kinds of compressive flows: the parallel flow at the Alfvén speed, that constitutes a bulk plasma motion along the magnetic field, the tube wave, and also transverse flows in the radial direction, associated with sausage fast magnetoacoustic modes. In addition, nonlinear torsional wave steepens and its propagation speed increases. The latter effect leads to the progressive distortion of torsional wave front, i.e. nonlinear phase mixing. Because of the intrinsic non-uniformity of the torsional wave amplitude across the tube radius, the nonlinear effects are more pronounced in regions with higher wave amplitude. They are always absent at the axes of the flux tube. In the case of a linear radial profile of the wave amplitude, the nonlinear effects are localised in an annulus region near the tube boundary. Thus, the parallel compressive flows driven by torsional Alfvén waves in the solar and stellar coronae, are essentially non-uniform in the perpendicular direction. The presence of additional sinks for the wave energy reduces the efficiency of the nonlinear parallel cascade in torsional Alfvén waves.
△ Less
Submitted 8 May, 2017;
originally announced May 2017.
-
Localisation of gamma-ray interaction points in thick monolithic CeBr3 and LaBr3:Ce scintillators
Authors:
Alexei Ulyanov,
Oran Morris,
Oliver J. Roberts,
Isaac Tobin,
Lorraine Hanlon,
Sheila McBreen,
David Murphy,
Nick Nelms,
Brian Shortt
Abstract:
Localisation of gamma-ray interaction points in monolithic scintillator crystals can simplify the design and improve the performance of a future Compton telescope for gamma-ray astronomy. In this paper we compare the position resolution of three monolithic scintillators: a 28x28x20 mm3 (length x breadth x thickness) LaBr3:Ce crystal, a 25x25x20 mm3 CeBr3 crystal and a 25x25x10 mm3 CeBr3 crystal. E…
▽ More
Localisation of gamma-ray interaction points in monolithic scintillator crystals can simplify the design and improve the performance of a future Compton telescope for gamma-ray astronomy. In this paper we compare the position resolution of three monolithic scintillators: a 28x28x20 mm3 (length x breadth x thickness) LaBr3:Ce crystal, a 25x25x20 mm3 CeBr3 crystal and a 25x25x10 mm3 CeBr3 crystal. Each crystal was encapsulated and coupled to an array of 4x4 silicon photomultipliers through an optical window. The measurements were conducted using 81 keV and 356 keV gamma-rays from a collimated 133Ba source. The 3D position reconstruction of interaction points was performed using artificial neural networks trained with experimental data. Although the position resolution was significantly better for the thinner crystal, the 20 mm thick CeBr3 crystal showed an acceptable resolution of about 5.4 mm FWHM for the x and y coordinates, and 7.8 mm FWHM for the z-coordinate (crystal depth) at 356 keV. These values were obtained from the full position scans of the crystal sides. The position resolution of the LaBr3:Ce crystal was found to be considerably worse, presumably due to the highly diffusive optical in- terface between the crystal and the optical window of the enclosure. The energy resolution (FWHM) measured for 662 keV gamma-rays was 4.0% for LaBr3:Ce and 5.5% for CeBr3. The same crystals equipped with a PMT (Hamamatsu R6322-100) gave an energy resolution of 3.0% and 4.7%, respectively.
△ Less
Submitted 19 January, 2017;
originally announced January 2017.
-
Current Sheet Structures Observed by the TESIS EUV Telescope During A Flux Rope Eruption on the Sun
Authors:
Anton Reva,
Artem Ulyanov,
Ssergey Kuzin
Abstract:
We use the TESIS EUV telescope to study the current sheet signatures observed during flux rope eruption. The special feature of the TESIS telescope was its ability to image the solar corona up to a distance of 2 $R_\odot$ from the Sun's center in the Fe 171 Å line. The Fe 171 Å line emission illuminates the magnetic field lines, and the TESIS images reveal the coronal magnetic structure at high al…
▽ More
We use the TESIS EUV telescope to study the current sheet signatures observed during flux rope eruption. The special feature of the TESIS telescope was its ability to image the solar corona up to a distance of 2 $R_\odot$ from the Sun's center in the Fe 171 Å line. The Fe 171 Å line emission illuminates the magnetic field lines, and the TESIS images reveal the coronal magnetic structure at high altitudes. The analyzed CME had a core with a spiral-flux rope-structure. The spiral shape indicates that the flux rope radius varied along its length. The flux rope had a complex temperature structure: cold legs (70 000 K, observed in He 304 Å line) and a hotter core (0.7 MK, observed in Fe 171 Å line). Such structure contradicts the common assumption that the CME core is a cold prominence. When the CME impulsively accelerated, a dark double Y-structure appeared below the flux rope. The Y-structure timing, location, and morphology agree with the previously performed MHD simulations of the current sheet. We interpreted the Y-structure as a hot envelope of the current sheet and hot reconnection outflows. The Y-structure had a thickness 6.0 Mm. Its length increased over time from 79 Mm to more than 411 Mm.
△ Less
Submitted 14 November, 2016;
originally announced November 2016.
-
The e-ASTROGAM mission (exploring the extreme Universe with gamma rays in the MeV-GeV range)
Authors:
Alessandro De Angelis,
Vincent Tatischeff,
Marco Tavani,
Uwe Oberlack,
Isabelle A. Grenier,
Lorraine Hanlon,
Roland Walter,
Andrea Argan,
Peter von Ballmoos,
Andrea Bulgarelli,
Immacolata Donnarumma,
Margarita Hernanz,
Irfan Kuvvetli,
Mark Pearce,
Andrzej Zdziarski,
Alessio Aboudan,
Marco Ajello,
Giovanni Ambrosi,
Denis Bernard,
Elisa Bernardini,
Valter Bonvicini,
Andrea Brogna,
Marica Branchesi,
Carl Budtz-Jorgensen,
Andrei Bykov
, et al. (49 additional authors not shown)
Abstract:
e-ASTROGAM (`enhanced ASTROGAM') is a breakthrough Observatory mission dedicated to the study of the non-thermal Universe in the photon energy range from 0.3 MeV to 3 GeV. The mission is based on an advanced space-proven detector technology, with unprecedented sensitivity, angular and energy resolution, combined with polarimetric capability. In the largely unexplored MeV-GeV domain, e-ASTROGAM wil…
▽ More
e-ASTROGAM (`enhanced ASTROGAM') is a breakthrough Observatory mission dedicated to the study of the non-thermal Universe in the photon energy range from 0.3 MeV to 3 GeV. The mission is based on an advanced space-proven detector technology, with unprecedented sensitivity, angular and energy resolution, combined with polarimetric capability. In the largely unexplored MeV-GeV domain, e-ASTROGAM will open a new window on the non-thermal Universe, making pioneering observations of the most powerful Galactic and extragalactic sources, elucidating the nature of their relativistic outflows and their effects on Galactic ecosystems. With a line sensitivity in the MeV energy range one to two orders of magnitude better than previous generation instruments, will determine the origin of key isotopes fundamental for the understanding of supernova explosion and the chemical evolution of our Galaxy. The mission will provide unique data of significant interest to a broad astronomical community, complementary to powerful observatories such as LIGO-Virgo-GEO600-KAGRA, SKA, ALMA, E-ELT, TMT, LSST, JWST, Athena, CTA, IceCube, KM3NeT, and the promise of eLISA.
Keywords: High-energy gamma-ray astronomy, High-energy astrophysics, Nuclear Astrophysics, Compton and Pair creation telescope, Gamma-ray bursts, Active Galactic Nuclei, Jets, Outflows, Multiwavelength observations of the Universe, Counterparts of gravitational waves, Fermi, Dark Matter, Nucleosynthesis, Early Universe, Supernovae, Cosmic Rays, Cosmic antimatter.
△ Less
Submitted 4 June, 2017; v1 submitted 7 November, 2016;
originally announced November 2016.
-
The e-ASTROGAM gamma-ray space mission
Authors:
V. Tatischeff,
M. Tavani,
P. von Ballmoos,
L. Hanlon,
U. Oberlack,
A. Aboudan,
A. Argan,
D. Bernard,
A. Brogna,
A. Bulgarelli,
A. Bykov,
R. Campana,
P. Caraveo,
M. Cardillo,
P. Coppi,
A. De Angelis,
R. Diehl,
I. Donnarumma,
V. Fioretti,
A. Giuliani,
I. Grenier,
J. E. Grove,
C. Hamadache,
D. Hartmann,
M. Hernanz
, et al. (26 additional authors not shown)
Abstract:
The e-ASTROGAM is a gamma-ray space mission to be proposed as the M5 Medium-size mission of the European Space Agency. It is dedicated to the observation of the Universe with unprecedented sensitivity in the energy range 0.2 - 100 MeV, extending up to GeV energies, together with a groundbreaking polarization capability. It is designed to substantially improve the COMPTEL and Fermi sensitivities in…
▽ More
The e-ASTROGAM is a gamma-ray space mission to be proposed as the M5 Medium-size mission of the European Space Agency. It is dedicated to the observation of the Universe with unprecedented sensitivity in the energy range 0.2 - 100 MeV, extending up to GeV energies, together with a groundbreaking polarization capability. It is designed to substantially improve the COMPTEL and Fermi sensitivities in the MeV-GeV energy range and to open new windows of opportunity for astrophysical and fundamental physics space research. e-ASTROGAM will operate as an open astronomical observatory, with a core science focused on (1) the activity from extreme particle accelerators, including gamma-ray bursts and active galactic nuclei and the link of jet astrophysics to the new astronomy of gravitational waves, neutrinos, ultra-high energy cosmic rays, (2) the high-energy mysteries of the Galactic center and inner Galaxy, including the activity of the supermassive black hole, the Fermi Bubbles, the origin of the Galactic positrons, and the search for dark matter signatures in a new energy window; (3) nucleosynthesis and chemical evolution, including the life cycle of elements produced by supernovae in the Milky Way and the Local Group of galaxies. e-ASTROGAM will be ideal for the study of high-energy sources in general, including pulsars and pulsar wind nebulae, accreting neutron stars and black holes, novae, supernova remnants, and magnetars. And it will also provide important contributions to solar and terrestrial physics. The e-ASTROGAM telescope is optimized for the simultaneous detection of Compton and pair-producing gamma-ray events over a large spectral band. It is based on a very high technology readiness level for all subsystems and includes many innovative features for the detectors and associated electronics.
△ Less
Submitted 31 January, 2017; v1 submitted 12 August, 2016;
originally announced August 2016.
-
Breakout Reconnection Observed by the TESIS EUV Telescope
Authors:
Anton Reva,
Artem Ulyanov,
Sergey Shestov,
Sergey Kuzin
Abstract:
We present experimental evidence of the coronal mass ejection (CME) breakout reconnection, observed by the TESIS EUV telescope. The telescope could observe solar corona up to 2 $R_\odot$ from the Sun center in the Fe 171 Å line. Starting from 2009 April 8 TESIS, observed an active region (AR) that had a quadrupolar structure with an X-point 0.5 $R_\odot$ above photosphere. A reconstructed from the…
▽ More
We present experimental evidence of the coronal mass ejection (CME) breakout reconnection, observed by the TESIS EUV telescope. The telescope could observe solar corona up to 2 $R_\odot$ from the Sun center in the Fe 171 Å line. Starting from 2009 April 8 TESIS, observed an active region (AR) that had a quadrupolar structure with an X-point 0.5 $R_\odot$ above photosphere. A reconstructed from the MDI data magnetic field also has a multipolar structure with an X-point above the AR. At 21:45 UT on April 9, the loops near the X-point started to move away from each other with a velocity of $\approx$ 7 km s$^{-1}$. At 01:15 UT on April 10, a bright stripe appeared between the loops, and the flux in the GOES 0.5-4 Å channel increased. We interpret the loops' sideways motion and the bright stripe as evidence of the breakout reconnection. At 01:45 UT, the loops below the X-point started to slowly move up. At 15:10 UT, the CME started to accelerate impulsively, while at the same time a flare arcade formed below the CME. After 15:50 UT, the CME moved with constant velocity. The CME evolution precisely followed the breakout model scenario.
△ Less
Submitted 18 January, 2016;
originally announced January 2016.
-
Initiation and early evolution of the Coronal Mass Ejection on May 13, 2009 from EUV and white-light observations
Authors:
Anton Reva,
Artem Ulyanov,
Sergey Bogachev,
Sergey Kuzin
Abstract:
We present the results of the observations of a coronal mass ejection (CME), which occurred on May 13, 2009. The most important feature of these observations is that the CME was observed from the very early stage (the solar surface) up to a distance of 15 solar radii ($R_\odot$). Below 2 $R_\odot$, we used the data from the TESIS EUV telescopes obtained in the Fe 171 A and He 304 A lines, and abov…
▽ More
We present the results of the observations of a coronal mass ejection (CME), which occurred on May 13, 2009. The most important feature of these observations is that the CME was observed from the very early stage (the solar surface) up to a distance of 15 solar radii ($R_\odot$). Below 2 $R_\odot$, we used the data from the TESIS EUV telescopes obtained in the Fe 171 A and He 304 A lines, and above 2 $R_\odot$, we used the observations of the LASCO C2 and C3 coronagraphs. The CME was formed at a distance of 0.2-0.5 $R_\odot$from the Sun's surface as a U-shaped structure, which was observed both in the 171 A images and in white-light. Observations in the He 304 A line showed that the CME was associated with an erupting prominence, which was located not above-as predicts the standard model-but in the lowest part of the U-shaped structure close to the magnetic X-point. The prominence location can be explained with the CME breakout model. Estimates showed that CME mass increased with time. The CME trajectory was curved-its helio-latitude decreased with time. The CME started at latitude of 50$^{\circ}$ and reached the ecliptic plane at distances of 2.5 $R_\odot$. The CME kinematics can be divided into three phases: initial acceleration, main acceleration, and propagation with constant velocity. After the CME onset GOES registered a sub-A-class flare.
△ Less
Submitted 25 September, 2015;
originally announced September 2015.
-
Gamma-ray diagnostics of Type Ia supernovae: Predictions of observables from three-dimensional modeling
Authors:
A. Summa,
A. Ulyanov,
M. Kromer,
S. Boyer,
F. K. Roepke,
S. A. Sim,
I. R. Seitenzahl,
M. Fink,
K. Mannheim,
R. Pakmor,
F. Ciaraldi-Schoolmann,
R. Diehl,
K. Maeda,
W. Hillebrandt
Abstract:
Besides the fact that the gamma-ray emission due to radioactive decays is responsible for powering the light curves of Type Ia supernovae (SNe Ia), gamma rays themselves are of particular interest as a diagnostic tool because they provide a direct way to obtain deeper insights into the nucleosynthesis and the kinematics of these explosion events. Focusing on two of the most broadly discussed SN Ia…
▽ More
Besides the fact that the gamma-ray emission due to radioactive decays is responsible for powering the light curves of Type Ia supernovae (SNe Ia), gamma rays themselves are of particular interest as a diagnostic tool because they provide a direct way to obtain deeper insights into the nucleosynthesis and the kinematics of these explosion events. Focusing on two of the most broadly discussed SN Ia progenitor scenarios - a delayed detonation in a Chandrasekhar-mass white dwarf (WD) and a violent merger of two WDs - we use three-dimensional explosion models and perform radiative transfer simulations to obtain synthetic gamma-ray spectra. Both chosen models produce the same mass of 56Ni and have similar optical properties that are in reasonable agreement with the recently observed supernova SN 2011fe. In contrast to the optical regime, the gamma-ray emission of our two chosen models proves to be rather different. The almost direct connection of the emission of gamma rays to fundamental physical processes occuring in SNe Ia permits additional constraints concerning several explosion model properties that are not easily accessible within other wavelength ranges. Proposed future MeV missions such as GRIPS will resolve all spectral details only for nearby SNe Ia, but hardness ratio and light curve measurements still allow for a distinction of the two different models at 10 and 16 Mpc for an exposure time of 10^6 s, respectively. The possibility to detect the strongest line features up to the Virgo distance will offer the opportunity to build up a first sample of SN Ia detections in the gamma-ray energy range and underlines the importance of future space observatories for MeV gamma rays.
△ Less
Submitted 9 April, 2013;
originally announced April 2013.
-
Study of silicon photomultipliers for the readout of scintillator crystals in the proposed GRIPS γ-ray astronomy mission
Authors:
Alexei Ulyanov,
Lorraine Hanlon,
Sheila McBreen,
Suzanne Foley,
David Byrne
Abstract:
Among the top priorities for high-energy astronomy in the coming decade are sensitive surveys in the hard X-ray/soft γ-ray (10-600 keV) and medium-energy γ-ray (0.2-80 MeV) bands. Historically, observations in the soft and medium energy γ-ray bands have been conducted using detectors based on inorganic scintillators read out by photo-multiplier tubes (PMTs). These observations were limited by the…
▽ More
Among the top priorities for high-energy astronomy in the coming decade are sensitive surveys in the hard X-ray/soft γ-ray (10-600 keV) and medium-energy γ-ray (0.2-80 MeV) bands. Historically, observations in the soft and medium energy γ-ray bands have been conducted using detectors based on inorganic scintillators read out by photo-multiplier tubes (PMTs). These observations were limited by the modest energy and time resolution of traditional scintillator materials (e.g. NaI and CsI), and by the demands on mission resources imposed by the bulky, fragile, high-voltage PMTs. Recent technological advances in the development of both new scintillator materials (e.g. LaBr3:Ce, L(Y)SO) and new scintillation light readout devices (e.g. Silicon Photo-Multipliers) promise to greatly improve the observational capabilities of future scintillator-based γ--ray telescopes, while retaining the relative simplicity, reliability, large collection volumes, and low-cost of scintillator instruments. We present initial results of a study on the use of silicon photomultipliers in the calorimeter module design of the proposed GRIPS astrophysics mission.
△ Less
Submitted 23 February, 2013;
originally announced February 2013.