-
X-ray spectral variations of Circinus X-1 observed with NICER throughout an entire orbital cycle
Authors:
Mayu Tominaga,
Masahiro Tsujimoto,
Ken Ebisawa,
Teruaki Enoto,
Kimitake Hayasaki
Abstract:
Circinus X-1 (Cir X-1) is a neutron star binary with an elliptical orbit of 16.6~days. The source is unique for its extreme youth, providing a key to understanding early binary evolution. However, its X-ray variability is too complex to reach a clear interpretation. We conducted the first high cadence (every 4 hours on average) observations covering one entire orbit using the NICER X-ray telescope…
▽ More
Circinus X-1 (Cir X-1) is a neutron star binary with an elliptical orbit of 16.6~days. The source is unique for its extreme youth, providing a key to understanding early binary evolution. However, its X-ray variability is too complex to reach a clear interpretation. We conducted the first high cadence (every 4 hours on average) observations covering one entire orbit using the NICER X-ray telescope. The X-ray flux behavior can be divided into stable, dip, and flaring phases. The X-ray spectra in all phases can be described by a common model consisting of a partially covered disk black body emission and the line features from a highly-ionized photo-ionized plasma. The spectral change over the orbit is attributable to rapid changes of the partial covering medium in the line-of-sight and gradual changes of the disk black body emission. Emission lines of the H-like and He-like Mg, Si, S, and Fe are detected, most prominently in the dip phase. The Fe emission lines change to absorption in the course of the transition from the dip phase to the flaring phase. The estimated ionization degree indicates no significant changes, suggesting that the photo-ionized plasma is stable over the orbit. We propose a simple model in which the disk black body emission is partially blocked by such a local medium in the line-of-sight that has spatial structures depending on the azimuth of the accretion disk. Emission lines upon the continuum emission are from the photo-ionized plasma located outside of the blocking material.
△ Less
Submitted 10 October, 2023;
originally announced October 2023.
-
Design of the on-board data compression for the bolometer data of LiteBIRD
Authors:
Mayu Tominaga,
Masahiro Tsujimoto,
Graeme Smecher,
Hirokazu Ishino
Abstract:
LiteBIRD is a space-borne experiment dedicated to detecting large-scale $B$-mode anisotropies in the linear polarization of the Cosmic Microwave Background (CMB) predicted by the theory of inflation. It is planned to be launched in the late 2020s to the second Lagrange point (L2) of the Sun-Earth system. LiteBIRD will map the sky in 15 frequency bands. In comparison to $\it{Planck}$ HFI, the previ…
▽ More
LiteBIRD is a space-borne experiment dedicated to detecting large-scale $B$-mode anisotropies in the linear polarization of the Cosmic Microwave Background (CMB) predicted by the theory of inflation. It is planned to be launched in the late 2020s to the second Lagrange point (L2) of the Sun-Earth system. LiteBIRD will map the sky in 15 frequency bands. In comparison to $\it{Planck}$ HFI, the previous low-temperature bolometer-based satellite for CMB observations, the number of detector has increased by two orders of magnitude, up to $\sim$5000 detectors in total. The data rate is 19 Hz from each detector. The bandpass to the ground is limited to 10 Mbps using the X-band for a few hours per day. These require the data to be compressed by more than 50 %. The exact value depends on how much information entropy is contained in the real data. We have thus evaluated the compression by simulating the time-ordered data of polarization sensitive bolometers. The foreground emission, detector noise, cosmic ray glitches, leakage from the CMB intensity to polarization, etc. are simulated. We investigated several algorithms and demonstrated that the required compression ratio can be achieved by some of them. We describe the details of this evaluation and propose algorithms that can be employed in the on-board digital electronics of LiteBIRD.
△ Less
Submitted 26 September, 2022;
originally announced September 2022.
-
Probing Cosmic Inflation with the LiteBIRD Cosmic Microwave Background Polarization Survey
Authors:
LiteBIRD Collaboration,
E. Allys,
K. Arnold,
J. Aumont,
R. Aurlien,
S. Azzoni,
C. Baccigalupi,
A. J. Banday,
R. Banerji,
R. B. Barreiro,
N. Bartolo,
L. Bautista,
D. Beck,
S. Beckman,
M. Bersanelli,
F. Boulanger,
M. Brilenkov,
M. Bucher,
E. Calabrese,
P. Campeti,
A. Carones,
F. J. Casas,
A. Catalano,
V. Chan,
K. Cheung
, et al. (166 additional authors not shown)
Abstract:
LiteBIRD, the Lite (Light) satellite for the study of B-mode polarization and Inflation from cosmic background Radiation Detection, is a space mission for primordial cosmology and fundamental physics. The Japan Aerospace Exploration Agency (JAXA) selected LiteBIRD in May 2019 as a strategic large-class (L-class) mission, with an expected launch in the late 2020s using JAXA's H3 rocket. LiteBIRD is…
▽ More
LiteBIRD, the Lite (Light) satellite for the study of B-mode polarization and Inflation from cosmic background Radiation Detection, is a space mission for primordial cosmology and fundamental physics. The Japan Aerospace Exploration Agency (JAXA) selected LiteBIRD in May 2019 as a strategic large-class (L-class) mission, with an expected launch in the late 2020s using JAXA's H3 rocket. LiteBIRD is planned to orbit the Sun-Earth Lagrangian point L2, where it will map the cosmic microwave background (CMB) polarization over the entire sky for three years, with three telescopes in 15 frequency bands between 34 and 448 GHz, to achieve an unprecedented total sensitivity of 2.2$μ$K-arcmin, with a typical angular resolution of 0.5$^\circ$ at 100 GHz. The primary scientific objective of LiteBIRD is to search for the signal from cosmic inflation, either making a discovery or ruling out well-motivated inflationary models. The measurements of LiteBIRD will also provide us with insight into the quantum nature of gravity and other new physics beyond the standard models of particle physics and cosmology. We provide an overview of the LiteBIRD project, including scientific objectives, mission and system requirements, operation concept, spacecraft and payload module design, expected scientific outcomes, potential design extensions and synergies with other projects.
△ Less
Submitted 27 March, 2023; v1 submitted 6 February, 2022;
originally announced February 2022.
-
Simulations of systematic effects arising from cosmic rays in the LiteBIRD space telescope, and effects on the measurements of CMB $B$-modes
Authors:
Samantha Lynn Stever,
Tommaso Ghigna,
Mayu Tominaga,
Giuseppe Puglisi,
Masahiro Tsujimoto,
Matteo Zeccoli Marazzini,
Matteo Baratto,
Maurizio Tomasi,
Yuto Minami,
Shinya Sugiyama,
Akihiro Kato,
Tomotake Matsumura,
Hirokazu Ishino,
Guillaume Patanchon,
Masashi Hazumi
Abstract:
Systematic effects arising from cosmic rays have been shown to be a significant threat to space telescopes using high-sensitivity bolometers. The LiteBIRD space mission aims to measure the polarised Cosmic Microwave Background with unprecedented sensitivity, but its positioning in space will also render it susceptible to cosmic ray effects. We present an end-to-end simulator for evaluating the exp…
▽ More
Systematic effects arising from cosmic rays have been shown to be a significant threat to space telescopes using high-sensitivity bolometers. The LiteBIRD space mission aims to measure the polarised Cosmic Microwave Background with unprecedented sensitivity, but its positioning in space will also render it susceptible to cosmic ray effects. We present an end-to-end simulator for evaluating the expected scale of cosmic ray effect on the LiteBIRD space mission, which we demonstrate on a subset of detectors on the 166 GHz band of the Low Frequency Telescope. The simulator couples the expected proton flux at L2 with a model of the thermal response of the LFT focal plane and the electrothermal response of its superconducting detectors, producing time-ordered data which is projected into simulated sky maps and subsequent angular power spectra.
△ Less
Submitted 29 June, 2021;
originally announced July 2021.
-
X-ray transmission calibration of the gate valve for the X-ray astronomy satellite XRISM
Authors:
Takuya Midooka,
Masahiro Tsujimoto,
Shunji Kitamoto,
Nozomi Nakaniwa,
Yoshitomo Maeda,
Manabu Ishida,
Ken Ebisawa,
Mayu Tominaga
Abstract:
\textit{Resolve} onboard the X-ray satellite XRISM is a cryogenic instrument with an X-ray microcalorimeter in a Dewar. A lid partially transparent to X-rays (called gate valve, or GV) is installed at the top of the Dewar along the optical axis. Because observations will be made through the GV for the first few months, the X-ray transmission calibration of the GV is crucial for initial scientific…
▽ More
\textit{Resolve} onboard the X-ray satellite XRISM is a cryogenic instrument with an X-ray microcalorimeter in a Dewar. A lid partially transparent to X-rays (called gate valve, or GV) is installed at the top of the Dewar along the optical axis. Because observations will be made through the GV for the first few months, the X-ray transmission calibration of the GV is crucial for initial scientific outcomes. We present the results of our ground calibration campaign of the GV, which is composed of a Be window and a stainless steel mesh. For the stainless steel mesh, we measured its transmission using the X-ray beamline at ISAS. For the Be window, we used synchrotron facilities to measure the transmission and modeled the data with (i) photoelectric absorption and incoherent scattering of Be, (ii) photoelectric absorption of contaminants, and (iii) coherent scattering of Be changing at specific energies. We discuss the physical interpretation of the transmission discontinuity caused by the Bragg diffraction in poly-crystal Be, which we incorporated into our transmission phenomenological model. We present the X-ray diffraction measurement on the sample to support our interpretation. The measurements and the constructed model meet the calibration requirements of the GV. We also performed a spectral fitting of the Crab nebula observed with Hitomi SXS and confirmed improvements of the model parameters.
△ Less
Submitted 15 April, 2021;
originally announced April 2021.
-
Overview of the Medium and High Frequency Telescopes of the LiteBIRD satellite mission
Authors:
L. Montier,
B. Mot,
P. de Bernardis,
B. Maffei,
G. Pisano,
F. Columbro,
J. E. Gudmundsson,
S. Henrot-Versillé,
L. Lamagna,
J. Montgomery,
T. Prouvé,
M. Russell,
G. Savini,
S. Stever,
K. L. Thompson,
M. Tsujimoto,
C. Tucker,
B. Westbrook,
P. A. R. Ade,
A. Adler,
E. Allys,
K. Arnold,
D. Auguste,
J. Aumont,
R. Aurlien
, et al. (212 additional authors not shown)
Abstract:
LiteBIRD is a JAXA-led Strategic Large-Class mission designed to search for the existence of the primordial gravitational waves produced during the inflationary phase of the Universe, through the measurements of their imprint onto the polarization of the cosmic microwave background (CMB). These measurements, requiring unprecedented sensitivity, will be performed over the full sky, at large angular…
▽ More
LiteBIRD is a JAXA-led Strategic Large-Class mission designed to search for the existence of the primordial gravitational waves produced during the inflationary phase of the Universe, through the measurements of their imprint onto the polarization of the cosmic microwave background (CMB). These measurements, requiring unprecedented sensitivity, will be performed over the full sky, at large angular scales, and over 15 frequency bands from 34GHz to 448GHz. The LiteBIRD instruments consist of three telescopes, namely the Low-, Medium- and High-Frequency Telescope (respectively LFT, MFT and HFT). We present in this paper an overview of the design of the Medium-Frequency Telescope (89-224GHz) and the High-Frequency Telescope (166-448GHz), the so-called MHFT, under European responsibility, which are two cryogenic refractive telescopes cooled down to 5K. They include a continuous rotating half-wave plate as the first optical element, two high-density polyethylene (HDPE) lenses and more than three thousand transition-edge sensor (TES) detectors cooled to 100mK. We provide an overview of the concept design and the remaining specific challenges that we have to face in order to achieve the scientific goals of LiteBIRD.
△ Less
Submitted 1 February, 2021;
originally announced February 2021.
-
LiteBIRD: JAXA's new strategic L-class mission for all-sky surveys of cosmic microwave background polarization
Authors:
M. Hazumi,
P. A. R. Ade,
A. Adler,
E. Allys,
K. Arnold,
D. Auguste,
J. Aumont,
R. Aurlien,
J. Austermann,
C. Baccigalupi,
A. J. Banday,
R. Banjeri,
R. B. Barreiro,
S. Basak,
J. Beall,
D. Beck,
S. Beckman,
J. Bermejo,
P. de Bernardis,
M. Bersanelli,
J. Bonis,
J. Borrill,
F. Boulanger,
S. Bounissou,
M. Brilenkov
, et al. (213 additional authors not shown)
Abstract:
LiteBIRD, the Lite (Light) satellite for the study of B-mode polarization and Inflation from cosmic background Radiation Detection, is a space mission for primordial cosmology and fundamental physics. JAXA selected LiteBIRD in May 2019 as a strategic large-class (L-class) mission, with its expected launch in the late 2020s using JAXA's H3 rocket. LiteBIRD plans to map the cosmic microwave backgrou…
▽ More
LiteBIRD, the Lite (Light) satellite for the study of B-mode polarization and Inflation from cosmic background Radiation Detection, is a space mission for primordial cosmology and fundamental physics. JAXA selected LiteBIRD in May 2019 as a strategic large-class (L-class) mission, with its expected launch in the late 2020s using JAXA's H3 rocket. LiteBIRD plans to map the cosmic microwave background (CMB) polarization over the full sky with unprecedented precision. Its main scientific objective is to carry out a definitive search for the signal from cosmic inflation, either making a discovery or ruling out well-motivated inflationary models. The measurements of LiteBIRD will also provide us with an insight into the quantum nature of gravity and other new physics beyond the standard models of particle physics and cosmology. To this end, LiteBIRD will perform full-sky surveys for three years at the Sun-Earth Lagrangian point L2 for 15 frequency bands between 34 and 448 GHz with three telescopes, to achieve a total sensitivity of 2.16 micro K-arcmin with a typical angular resolution of 0.5 deg. at 100GHz. We provide an overview of the LiteBIRD project, including scientific objectives, mission requirements, top-level system requirements, operation concept, and expected scientific outcomes.
△ Less
Submitted 29 January, 2021;
originally announced January 2021.
-
Simulation of the cosmic ray effects for the LiteBIRD satellite observing the CMB B-mode polarization
Authors:
Mayu Tominaga,
Masahiro Tsujimoto,
Samantha Lynn Stever,
Tommaso Ghigna,
Hirokazu Ishino,
Ken Ebisawa
Abstract:
The LiteBIRD satellite is planned to be launched by JAXA in the late 2020s. Its main purpose is to observe the large-scale B-mode polarization in the Cosmic Microwave Background (CMB) anticipated from the Inflation theory. LiteBIRD will observe the sky for three years at the second Lagrangian point (L2) of the Sun-Earth system. Planck was the predecessor for observing the CMB at L2, and the onboar…
▽ More
The LiteBIRD satellite is planned to be launched by JAXA in the late 2020s. Its main purpose is to observe the large-scale B-mode polarization in the Cosmic Microwave Background (CMB) anticipated from the Inflation theory. LiteBIRD will observe the sky for three years at the second Lagrangian point (L2) of the Sun-Earth system. Planck was the predecessor for observing the CMB at L2, and the onboard High Frequency Instrument (HFI) suffered contamination by glitches caused by the cosmic-ray (CR) hits. We consider the CR hits can also be a serious source of the systematic uncertainty for LiteBIRD. Thus, we have started a comprehensive end-to-end simulation study to assess impact of the CR hits for the LiteBIRD detectors. Here, we describe procedures to make maps and power spectra from the simulated time-ordered data, and present initial results. Our initial estimate is that $C_l^{BB}$ by CR is $\sim 2 \times 10^{-6}~μ$K$_{\mathrm{CMB}}^{2}$ in a one-year observation with 12 detectors assuming that the noise is 1~aW/$\sqrt{\mathrm{Hz}}$ for the differential mode of two detectors constituting a polarization pair.
△ Less
Submitted 20 January, 2021;
originally announced January 2021.
-
Concept Design of Low Frequency Telescope for CMB B-mode Polarization satellite LiteBIRD
Authors:
Y. Sekimoto,
P. A. R. Ade,
A. Adler,
E. Allys,
K. Arnold,
D. Auguste,
J. Aumont,
R. Aurlien,
J. Austermann,
C. Baccigalupi,
A. J. Banday,
R. Banerji,
R. B. Barreiro,
S. Basak,
J. Beall,
D. Beck,
S. Beckman,
J. Bermejo,
P. de Bernardis,
M. Bersanelli,
J. Bonis,
J. Borrill,
F. Boulanger,
S. Bounissou,
M. Brilenkov
, et al. (212 additional authors not shown)
Abstract:
LiteBIRD has been selected as JAXA's strategic large mission in the 2020s, to observe the cosmic microwave background (CMB) $B$-mode polarization over the full sky at large angular scales. The challenges of LiteBIRD are the wide field-of-view (FoV) and broadband capabilities of millimeter-wave polarization measurements, which are derived from the system requirements. The possible paths of stray li…
▽ More
LiteBIRD has been selected as JAXA's strategic large mission in the 2020s, to observe the cosmic microwave background (CMB) $B$-mode polarization over the full sky at large angular scales. The challenges of LiteBIRD are the wide field-of-view (FoV) and broadband capabilities of millimeter-wave polarization measurements, which are derived from the system requirements. The possible paths of stray light increase with a wider FoV and the far sidelobe knowledge of $-56$ dB is a challenging optical requirement. A crossed-Dragone configuration was chosen for the low frequency telescope (LFT : 34--161 GHz), one of LiteBIRD's onboard telescopes. It has a wide field-of-view ($18^\circ \times 9^\circ$) with an aperture of 400 mm in diameter, corresponding to an angular resolution of about 30 arcminutes around 100 GHz. The focal ratio f/3.0 and the crossing angle of the optical axes of 90$^\circ$ are chosen after an extensive study of the stray light. The primary and secondary reflectors have rectangular shapes with serrations to reduce the diffraction pattern from the edges of the mirrors. The reflectors and structure are made of aluminum to proportionally contract from warm down to the operating temperature at $5\,$K. A 1/4 scaled model of the LFT has been developed to validate the wide field-of-view design and to demonstrate the reduced far sidelobes. A polarization modulation unit (PMU), realized with a half-wave plate (HWP) is placed in front of the aperture stop, the entrance pupil of this system. A large focal plane with approximately 1000 AlMn TES detectors and frequency multiplexing SQUID amplifiers is cooled to 100 mK. The lens and sinuous antennas have broadband capability. Performance specifications of the LFT and an outline of the proposed verification plan are presented.
△ Less
Submitted 15 January, 2021;
originally announced January 2021.
-
Discovery of the black hole X-ray binary transient MAXIJ1348-630
Authors:
Mayu Tominaga,
Satoshi Nakahira,
Megumi Shidatsu,
Motoki Oeda,
Ken Ebisawa,
Yasuharu Sugawara,
Hitoshi Negoro,
Nubuyuki Kawai,
Mutsumi Sugizaki,
Yoshihiro Ueda,
Tatehiro Mihara
Abstract:
We report the first half-year monitoring of the new Galactic black hole candidate MAXI J1348-630, discovered on 2019 January 26 with the Gas Slit Camera (GSC) on-board MAXI. During the monitoring period, the source exhibited two outburst peaks, where the first peak flux (at T=14 day from the discovery of T =0) was ~4 Crab (2-20 keV) and the second one (at T =132 day) was ~0.4 Crab (2-20 keV). The…
▽ More
We report the first half-year monitoring of the new Galactic black hole candidate MAXI J1348-630, discovered on 2019 January 26 with the Gas Slit Camera (GSC) on-board MAXI. During the monitoring period, the source exhibited two outburst peaks, where the first peak flux (at T=14 day from the discovery of T =0) was ~4 Crab (2-20 keV) and the second one (at T =132 day) was ~0.4 Crab (2-20 keV). The source exhibited distinct spectral transitions between the high/soft and low/hard states and an apparent "q"-shape curve on the hardness-intensity diagram, both of which are well-known characteristics of black hole binaries. Compared to other bright black hole transients, MAXI J1348-630 is characterized by its low disk-temperature (~0.75 keV at the maximum) and high peak flux in the high/soft state. The low peak-temperature leads to a large innermost radius that is identified as the Innermost Stable Circular Orbit (ISCO), determined by the black hole mass and spin. Assuming the empirical relation between the soft-to-hard transition luminosity (Ltrans) and the Eddington luminosity (LEdd), Ltrans/LEdd ~ 0.02, and a face-on disk around a non-spinning black hole, the source distance and the black hole mass are estimated to be D ~ 4 kpc and ~7 (D/4 kpc) Mo, respectively. The black hole is more massive if the disk is inclined and the black hole is spinning. These results suggest that MAXI J1348-630 may host a relatively massive black hole among the known black hole binaries in our Galaxy.
△ Less
Submitted 31 July, 2020; v1 submitted 7 April, 2020;
originally announced April 2020.
