-
The metallicity dependence of the stellar initial mass function
Authors:
Tabassum S. Tanvir,
Mark R. Krumholz
Abstract:
Dust is important for star formation because it is the crucial component that couples gas to stellar radiation fields, allowing radiation feedback to influence gas fragmentation and thus the stellar initial mass function (IMF). Variations in dust abundance therefore provide a potential avenue by which variation in galaxy metallicity might affect the IMF. In this paper we present a series of radiat…
▽ More
Dust is important for star formation because it is the crucial component that couples gas to stellar radiation fields, allowing radiation feedback to influence gas fragmentation and thus the stellar initial mass function (IMF). Variations in dust abundance therefore provide a potential avenue by which variation in galaxy metallicity might affect the IMF. In this paper we present a series of radiation-magnetohydrodynamic simulations in which we vary the metallicity and thus the dust abundance from 1% of Solar to 3$\times$ Solar, spanning the range from the lowest metallicity dwarfs to the most metal-rich early-type galaxies found in the local Universe. We design the simulations to keep all dimensionless parameters constant so that the interaction between feedback and star-forming environments of varying surface density and metallicity is the only factor capable of breaking the symmetry between the simulations and modifying the IMF, allowing us to cleanly isolate and understand the effects of each environmental parameter. We find that at a fixed surface density more metal-rich clouds tend to form a slightly more bottom-heavy IMF than metal-poor ones, primarily because in metal-poor gas radiation feedback is able to propagate further, heating somewhat larger volumes of gas. However, shifts in IMF with metallicity at a fixed surface density are much smaller than shifts with surface density at fixed metallicity; metallicity-induced IMF variations are too small to explain the variations in mass-to-light ratio reported in galaxies of different mass and metallicity. We, therefore, conclude that metallicity variations are much less important than variations in surface density in driving changes in the IMF and that the latter rather than the former are most likely responsible for the IMF variations found in early-type galaxies.
△ Less
Submitted 31 May, 2023;
originally announced May 2023.
-
Environmental variation of the low-mass IMF
Authors:
Tabassum S Tanvir,
Mark R Krumholz,
Christoph Federrath
Abstract:
We use a series of magnetohydrodynamic simulations including both radiative and protostellar outflow feedback to study the environmental variation of the initial mass function. The simulations represent a carefully-controlled experiment whereby we keep all dimensionless parameters of the flow constant except for those related to feedback. We show that radiation feedback suppresses the formation of…
▽ More
We use a series of magnetohydrodynamic simulations including both radiative and protostellar outflow feedback to study the environmental variation of the initial mass function. The simulations represent a carefully-controlled experiment whereby we keep all dimensionless parameters of the flow constant except for those related to feedback. We show that radiation feedback suppresses the formation of lower mass objects more effectively as the surface density increases, but this only partially compensates for the decreasing Jeans mass in denser environments. Similarly, we find that protostellar outflows are more effective at suppressing the formation of massive stars in higher surface density environments. The combined effect of these two trends is towards an IMF with a lower characteristic mass and a narrower overall mass range in high surface density environments. We discuss the implications of these findings for the interpretation of observational evidence of IMF variation in early-type galaxies.
△ Less
Submitted 14 September, 2022; v1 submitted 10 June, 2022;
originally announced June 2022.
-
Collision Between Molecular Clouds-III: The effects of cloud initial density profile on head-on collisions
Authors:
Tabassum S Tanvir,
James E Dale
Abstract:
In this third paper in our cloud-collision series, we present the results from simulations of head-on collisions with a strongly centrally-condensed initial density profile of $\rm ρ\propto R^{-2}$. We investigate the impact of these density profiles on the overall evolution of the simulations: the structures formed, their dynamical evolution, and their star formation activity. We consider clouds…
▽ More
In this third paper in our cloud-collision series, we present the results from simulations of head-on collisions with a strongly centrally-condensed initial density profile of $\rm ρ\propto R^{-2}$. We investigate the impact of these density profiles on the overall evolution of the simulations: the structures formed, their dynamical evolution, and their star formation activity. We consider clouds which are globally bound and globally unbound, leading to three different scenarios -- the collision of a bound cloud with a bound cloud, the collision of two unbound clouds, or the collision of one cloud of each type. In all the simulations dense star clusters form before the collisions occur, and we find that star formation remains confined to these systems and is little affected by the collisions. If the clouds' are both initially bound, the collision forms a filamentary structure, but otherwise, this does not occur. We observe that rotating structures form around the clusters, but they also form in our non-colliding control simulations, so are not a consequence of the collisions. Dissipation of kinetic energy in these simulations is inefficient because of the substructure created in the clouds by turbulence before the collisions. As a result, although some gas is left bound in the COM frame, the star clusters formed in the simulations do not become bound to each other.
△ Less
Submitted 10 May, 2021;
originally announced May 2021.
-
HiFLEx -- a highly flexible package to reduce cross-dispersed echelle spectra
Authors:
Ronny Errmann,
Neil Cook,
Guillem Anglada-Escudé,
Sirinrat Sithajan,
David Mkrtichia,
Eugene Semenko,
William Martin,
Tabassum S. Tanvir,
Fabo Feng,
James L. Collett,
Hugh R. A. Jones
Abstract:
We describe a flexible data reduction package for high resolution cross-dispersed echelle data. This open-source package is developed in Python and includes optional GUIs for most of the steps. It does not require any pre-knowledge about the form or position of the echelle-orders. It has been tested on cross-dispersed echelle spectrographs between 13k and 115k resolution (bifurcated fiber-fed spec…
▽ More
We describe a flexible data reduction package for high resolution cross-dispersed echelle data. This open-source package is developed in Python and includes optional GUIs for most of the steps. It does not require any pre-knowledge about the form or position of the echelle-orders. It has been tested on cross-dispersed echelle spectrographs between 13k and 115k resolution (bifurcated fiber-fed spectrogaph ESO-HARPS and single fiber-fed spectrograph TNT-MRES). HiFLEx can be used to determine radial velocities and is designed to use the TERRA package but can also control the radial velocity packages such as CERES and SERVAL to perform the radial velocity analysis. Tests on HARPS data indicates radial velocities results within 3m/s of the literature pipelines without any fine tuning of extraction parameters.
△ Less
Submitted 17 June, 2020;
originally announced June 2020.
-
Collision between Molecular Clouds I. The effect of the cloud virial ratio in head-on collisions
Authors:
Tabassum S Tanvir,
James E Dale
Abstract:
In a series of papers we investigate the effect of collisions between turbulent molecular clouds on their structure, evolution and star formation activity. In this paper we look into the role of the clouds' initial virial ratios. Three different scenarios were examined: both clouds initially bound, one cloud bound and one unbound, and both clouds initially unbound. Models in which one or both clou…
▽ More
In a series of papers we investigate the effect of collisions between turbulent molecular clouds on their structure, evolution and star formation activity. In this paper we look into the role of the clouds' initial virial ratios. Three different scenarios were examined: both clouds initially bound, one cloud bound and one unbound, and both clouds initially unbound. Models in which one or both clouds are bound generate filamentary structures aligned along the collision axis and discernible in position-position and position--velocity space. If neither cloud is bound, no filaments result. Unlike in previous simulations of collisions between smooth clouds, owing to the substructure created in the clouds by turbulence before the collisions, dissipation of kinetic energy by the collision is very inefficient and in none of our simulations is sufficient bulk kinetic energy lost to render the clouds bound. Simulations where both clouds are bound created twice as much stellar mass than the bound-unbound model, and both these scenarios produced much more stellar mass than the simulation in which both clouds are unbound. Each simulation was also compared with a control run in which the clouds do not collide. We find the bound-bound collision increases the overall star formation efficiency by a factor of approximately two relative to the control, but that the bound-unbound collision produces a much smaller increase, and the collision has very little effect on the unbound--unbound cloud collision.
△ Less
Submitted 12 March, 2020; v1 submitted 10 March, 2020;
originally announced March 2020.
-
A catalogue of close encounter pairs
Authors:
Fabo Feng,
Hugh R. A. Jones,
Tabassum S. Tanvir
Abstract:
We provide a catalogue of pairs of stars whose periapses are less than 1pc within the past or future 100 Myr. We use astrometric data from TGAS, Hipparcos and radial velocity data from RAVE and XHIP to find the space motions and hence the initial conditions of 229, 441 stars in Galactic coordinates. We simulate the orbits of these stars and focus on the time, distance and velocity at periastron fo…
▽ More
We provide a catalogue of pairs of stars whose periapses are less than 1pc within the past or future 100 Myr. We use astrometric data from TGAS, Hipparcos and radial velocity data from RAVE and XHIP to find the space motions and hence the initial conditions of 229, 441 stars in Galactic coordinates. We simulate the orbits of these stars and focus on the time, distance and velocity at periastron for 8149 pairs using the k-d tree algorithm to find nearest neighbors. We find an anisotropy in the directions of encounter pairs caused by the solar apex motion, indicating a role of peculiar motion imposing an anisotropic tidal force on planetary systems. We call this effect "kinematic tide". Among the encounter pairs there are 4 encounters with the Solar System with periapses less than 1 pc and 96 pairs with periapses less than 0.1 pc. We also find 577 close encounters of stars which host planetary systems and/or debris disks. We discuss a range of uses for an encounter catalogue and present an example of how the time-varying network of stellar motions will be crucial for efficient interstellar travel between planetary systems. The catalogues are available at http://star.herts.ac.uk/pandora/cep1.
△ Less
Submitted 21 December, 2017; v1 submitted 17 July, 2017;
originally announced July 2017.