-
Shape models and spin states of Jupiter Trojans: Testing the streaming instability formation scenario
Authors:
Josef Hanuš,
David Vokrouhlický,
David Nesvorný,
Josef Ďurech,
Robert Stephens,
Vladimir Benishek,
Julian Oey,
Petr Pokorný
Abstract:
The leading theory for the origin of Jupiter Trojans (JTs) assumes that JTs were captured to their orbits near the Lagrangian points of Jupiter during the early reconfiguration of the giant planets. The natural source region for the majority of JTs would then be the population of planetesimals born in a massive trans-Neptunian disk. If true, JTs represent the most accessible stable population of s…
▽ More
The leading theory for the origin of Jupiter Trojans (JTs) assumes that JTs were captured to their orbits near the Lagrangian points of Jupiter during the early reconfiguration of the giant planets. The natural source region for the majority of JTs would then be the population of planetesimals born in a massive trans-Neptunian disk. If true, JTs represent the most accessible stable population of small Solar System bodies that formed in the outer regions of the Solar System. For this work, we compiled photometric datasets for about 1000 JTs and applied the convex inversion technique in order to assess their shapes and spin states. We obtained full solutions for $79$ JTs, and partial solutions for an additional $31$ JTs. We found that the observed distribution of the pole obliquities of JTs is broadly consistent with expectations from the streaming instability, which is the leading mechanism for the formation of planetesimals in the trans-Neptunian disk. The observed JTs' pole distribution has a slightly smaller prograde vs. retrograde asymmetry (excess of obliquities $>130^\circ$) than what is expected from the existing streaming instability simulations. However, this discrepancy can be plausibly reconciled by the effects of the post-formation collisional activity. Our numerical simulations of the post-capture spin evolution indicate that the JTs' pole distribution is not significantly affected by dynamical processes such as the eccentricity excitation in resonances, close encounters with planets, or the effects of nongravitational forces. However, a few JTs exhibit large latitude variations of the rotation pole and may even temporarily transition between prograde- and retrograde-rotating categories.
△ Less
Submitted 10 August, 2023;
originally announced August 2023.
-
Spin vectors in the Koronis family: IV. Completing the sample of its largest members after 35 years of study
Authors:
Stephen M. Slivan,
Matthew Hosek Jr.,
Max Kurzner,
Alyssa Sokol,
Sarah Maynard,
Anna V. Payne,
Arden Radford,
Alessondra Springmann,
Richard P. Binzel,
Francis P. Wilkin,
Emily A. Mailhot,
Alan H. Midkiff,
April Russell,
Robert D. Stephens,
Vincent Gardiner,
Daniel E. Reichart,
Joshua Haislip,
Aaron LaCluyze,
Raoul Behrend,
René Roy
Abstract:
An observational study of Koronis family members' spin properties was undertaken with two primary objectives: to reduce selection biases for object rotation period and lightcurve amplitude in the sample of members' known spin vectors, and to better constrain future modeling of spin properties evolution. Here we report rotation lightcurves of nineteen Koronis family members, and derived results tha…
▽ More
An observational study of Koronis family members' spin properties was undertaken with two primary objectives: to reduce selection biases for object rotation period and lightcurve amplitude in the sample of members' known spin vectors, and to better constrain future modeling of spin properties evolution. Here we report rotation lightcurves of nineteen Koronis family members, and derived results that increase the sample of determined spin vectors in the Koronis family to include 34 of the largest 36 family members, completing it to $H \approx 11.3$ ($D \sim 16$ km) for the largest 32 members. The program observations were made during a total of 72 apparitions between 2005-2021, and are reported here along with several earlier unpublished lightcurves. All of the reported data were analyzed together with previously published lightcurves to determine the objects' sidereal rotation periods, spin vector orientations, and convex model shape solutions. The derived distributions of retrograde rotation rates and pole obliquities appear to be qualitatively consistent with outcomes of modification by thermal YORP torques. The distribution of spin rates for the prograde rotators remains narrower than that for the retrograde rotators; in particular, the absence of prograde rotators having periods longer than about 20 h is real, while among the retrograde rotators are several objects having longer periods up to about 65 h. None of the prograde objects newly added to the sample appear to be trapped in an $s_6$ spin-orbit resonance that is characteristic of most of the largest prograde objects; these smaller objects either could have been trapped previously and have already evolved out, or have experienced spin evolution tracks that did not include the resonance.
△ Less
Submitted 23 December, 2022;
originally announced December 2022.
-
(3200) Phaethon: Bulk density from Yarkovsky drift detection
Authors:
Josef Hanus,
David Vokrouhlicky,
Marco Delbo,
Davide Farnocchia,
David Polishook,
Petr Pravec,
Kamil Hornoch,
Hana Kucakova,
Peter Kusnirak,
Robert Stephens,
Brian Warner
Abstract:
The recent close approach of the NEA (3200) Phaethon offered a rare opportunity to obtain high-quality observational data. We used the newly obtained optical light curves to improve the spin and shape model of Phaethon and to determine its surface physical properties derived by thermophysical modeling. We also used the available astrometric observations of Phaethon, including those obtained by the…
▽ More
The recent close approach of the NEA (3200) Phaethon offered a rare opportunity to obtain high-quality observational data. We used the newly obtained optical light curves to improve the spin and shape model of Phaethon and to determine its surface physical properties derived by thermophysical modeling. We also used the available astrometric observations of Phaethon, including those obtained by the Arecibo radar and the Gaia spacecraft, to constrain the secular drift of the orbital semimajor axis. This constraint allowed us to estimate the bulk density by assuming that the drift is dominated by the Yarkovsky effect. We used the convex inversion model to derive the 3D shape model of Phaethon, and a detailed numerical approach for an accurate analysis of the Yarkovsky effect. We obtained a unique solution for Phaethon's pole orientation at $(318,-47)^{\circ}$ ecliptic longitude and latitude (uncertainty of $5^{\circ}$), and confirm the previously reported thermophysical properties ($D=5.1\pm0.2$ km, $Γ=600\pm200$ SI). Phaethon has a top-like shape with possible north-south asymmetry. The characteristic size of the regolith grains is 1-2 cm. The orbit analysis reveals a secular drift of the semimajor axis of $-(6.9\pm1.9)\times 10^{-4}$ au Myr$^{-1}$. With the derived volume-equivalent size of 5.1~km, the bulk density $ρ$ is $1.67\pm0.47$ g cm$^{-3}$. If the size is slightly larger $\sim5.7$ km, as suggested by radar data, $ρ$ would decrease to $1.48\pm0.42$ g cm$^{-3}$. We further investigated the suggestion that Phaethon may be in a cluster with asteroids (155140) 2005 UD and (225416) 1999 YC that was formed by rotational fission of a critically spinning parent body. Phaethon's $ρ$ is consistent with typical values for large ($>100$ km) C-complex asteroids and supports its association with asteroid (2) Pallas. These findings render a cometary origin unlikely for Phaethon.
△ Less
Submitted 27 November, 2018;
originally announced November 2018.
-
New and updated convex shape models of asteroids based on optical data from a large collaboration network
Authors:
J. Hanuš,
J. Ďurech,
D. A. Oszkiewicz,
R. Behrend,
B. Carry,
M. Delbo',
O. Adam,
V. Afonina,
R. Anquetin,
P. Antonini,
L. Arnold,
M. Audejean,
P. Aurard,
M. Bachschmidt,
B. Badue,
E. Barbotin,
P. Barroy,
P. Baudouin,
L. Berard,
N. Berger,
L. Bernasconi,
J-G. Bosch,
S. Bouley,
I. Bozhinova,
J. Brinsfield
, et al. (144 additional authors not shown)
Abstract:
Asteroid modeling efforts in the last decade resulted in a comprehensive dataset of almost 400 convex shape models and their rotation states. This amount already provided a deep insight into physical properties of main-belt asteroids or large collisional families. We aim to increase the number of asteroid shape models and rotation states. Such results are an important input for various further stu…
▽ More
Asteroid modeling efforts in the last decade resulted in a comprehensive dataset of almost 400 convex shape models and their rotation states. This amount already provided a deep insight into physical properties of main-belt asteroids or large collisional families. We aim to increase the number of asteroid shape models and rotation states. Such results are an important input for various further studies such as analysis of asteroid physical properties in different populations, including smaller collisional families, thermophysical modeling, and scaling shape models by disk-resolved images, or stellar occultation data. This provides, in combination with known masses, bulk density estimates, but constrains also theoretical collisional and evolutional models of the Solar System. We use all available disk-integrated optical data (i.e., classical dense-in-time photometry obtained from public databases and through a large collaboration network as well as sparse-in-time individual measurements from a few sky surveys) as an input for the convex inversion method, and derive 3D shape models of asteroids, together with their rotation periods and orientations of rotation axes. The key ingredient is the support of more that one hundred observers who submit their optical data to publicly available databases. We present updated shape models for 36 asteroids, for which mass estimates are currently available in the literature or their masses will be most likely determined from their gravitational influence on smaller bodies, which orbital deflection will be observed by the ESA Gaia astrometric mission. This was achieved by using additional optical data from recent apparitions for the shape optimization. Moreover, we also present new shape model determinations for 250 asteroids, including 13 Hungarias and 3 near-Earth asteroids.
△ Less
Submitted 26 October, 2015;
originally announced October 2015.
-
Photometric Properties of Ceres from Telescopic Observations using Dawn Framing Camera Color Filters
Authors:
Vishnu Reddy,
Jian-Yang Li,
Bruce L. Gary,
Juan A. Sanchez,
Robert D. Stephens,
Ralph Megna,
Daniel Coley,
Andreas Nathues,
Lucille Le Corre,
Martin Hoffmann
Abstract:
The dwarf planet Ceres is likely differentiated similar to the terrestrial planets but with a water/ice dominated mantle and an aqueously altered crust. Detailed modeling of Ceres' phase function has never been performed to understand its surface properties. The Dawn spacecraft began orbital science operations at the dwarf planet in April 2015. We observed Ceres with flight spares of the seven Daw…
▽ More
The dwarf planet Ceres is likely differentiated similar to the terrestrial planets but with a water/ice dominated mantle and an aqueously altered crust. Detailed modeling of Ceres' phase function has never been performed to understand its surface properties. The Dawn spacecraft began orbital science operations at the dwarf planet in April 2015. We observed Ceres with flight spares of the seven Dawn Framing Camera color filters mounted on ground-based telescopes over the course of three years to model its phase function versus wavelength. Our analysis shows that the modeled geometric albedos derived from both the IAU HG model and the Hapke model are consistent with a flat and featureless spectrum of Ceres, although the values are ~10% higher than previous measurements. Our models also suggest a wavelength dependence of Ceres' phase function. The IAU G-parameter and the Hapke single-particle phase function parameter, g, are both consistent with decreasing (shallower) phase slope with increasing wavelength. Such a wavelength dependence of phase function is consistent with reddening of spectral slope with increasing phase angle, or phase-reddening. This phase reddening is consistent with previous spectra of Ceres obtained at various phase angles archived in the literature, and consistent with the fact that the modeled geometric albedo spectrum of Ceres is the bluest of all spectra because it represents the spectrum at 0 degree phase angle. Ground-based FC color filter lightcurve data are consistent with HST albedo maps confirming that Ceres' lightcurve is dominated by albedo and not shape. We detected a positive correlation between 1.1-micron absorption band depth and geometric albedo suggesting brighter areas on Ceres have absorption bands that are deeper.
△ Less
Submitted 1 October, 2015;
originally announced October 2015.
-
An anisotropic distribution of spin vectors in asteroid families
Authors:
J. Hanuš,
M. Brož,
J. Ďurech,
B. D. Warner,
J. Brinsfield,
R. Durkee,
D. Higgins,
R. A. Koff,
J. Oey,
F. Pilcher,
R. Stephens,
L. P. Strabla,
Q. Ulisse,
R. Girelli
Abstract:
Current amount of ~500 asteroid models derived from the disk-integrated photometry by the lightcurve inversion method allows us to study not only the spin-vector properties of the whole population of MBAs, but also of several individual collisional families. We create a data set of 152 asteroids that were identified by the HCM method as members of ten collisional families, among them are 31 newly…
▽ More
Current amount of ~500 asteroid models derived from the disk-integrated photometry by the lightcurve inversion method allows us to study not only the spin-vector properties of the whole population of MBAs, but also of several individual collisional families. We create a data set of 152 asteroids that were identified by the HCM method as members of ten collisional families, among them are 31 newly derived unique models and 24 new models with well-constrained pole-ecliptic latitudes of the spin axes. The remaining models are adopted from the DAMIT database or the literature. We revise the preliminary family membership identification by the HCM method according to several additional criteria - taxonomic type, color, albedo, maximum Yarkovsky semi-major axis drift and the consistency with the size-frequency distribution of each family, and consequently we remove interlopers. We then present the spin-vector distributions for eight asteroidal families. We use a combined orbital- and spin-evolution model to explain the observed spin-vector properties of objects among collisional families. In general, we observe for studied families similar trends in the (a_p, β) space: (i) larger asteroids are situated in the proximity of the center of the family; (ii) asteroids with β>0° are usually found to the right from the family center; (iii) on the other hand, asteroids with β<0° to the left from the center; (iv) majority of asteroids have large pole-ecliptic latitudes (|β|\gtrsim 30°); and finally (v) some families have a statistically significant excess of asteroids with β>0° or β<0°. Our numerical simulation of the long-term evolution of a collisional family is capable of reproducing well the observed spin-vector properties. Using this simulation, we also independently constrain the age of families Flora (1.0\pm0.5 Gyr) and Koronis (2.5-4 Gyr).
△ Less
Submitted 17 September, 2013;
originally announced September 2013.
-
Asteroids' physical models from combined dense and sparse photometry and scaling of the YORP effect by the observed obliquity distribution
Authors:
J. Hanuš,
J. Ďurech,
M. Brož,
A. Marciniak,
B. D. Warner,
F. Pilcher,
R. Stephens,
R. Behrend,
B. Carry,
D. Čapek,
P. Antonini,
M. Audejean,
K. Augustesen,
E. Barbotin,
P. Baudouin,
A. Bayol,
L. Bernasconi,
W. Borczyk,
J. -G. Bosch,
E. Brochard,
L. Brunetto,
S. Casulli,
A. Cazenave,
S. Charbonnel,
B. Christophe
, et al. (95 additional authors not shown)
Abstract:
The larger number of models of asteroid shapes and their rotational states derived by the lightcurve inversion give us better insight into both the nature of individual objects and the whole asteroid population. With a larger statistical sample we can study the physical properties of asteroid populations, such as main-belt asteroids or individual asteroid families, in more detail. Shape models can…
▽ More
The larger number of models of asteroid shapes and their rotational states derived by the lightcurve inversion give us better insight into both the nature of individual objects and the whole asteroid population. With a larger statistical sample we can study the physical properties of asteroid populations, such as main-belt asteroids or individual asteroid families, in more detail. Shape models can also be used in combination with other types of observational data (IR, adaptive optics images, stellar occultations), e.g., to determine sizes and thermal properties. We use all available photometric data of asteroids to derive their physical models by the lightcurve inversion method and compare the observed pole latitude distributions of all asteroids with known convex shape models with the simulated pole latitude distributions. We used classical dense photometric lightcurves from several sources and sparse-in-time photometry from the U.S. Naval Observatory in Flagstaff, Catalina Sky Survey, and La Palma surveys (IAU codes 689, 703, 950) in the lightcurve inversion method to determine asteroid convex models and their rotational states. We also extended a simple dynamical model for the spin evolution of asteroids used in our previous paper. We present 119 new asteroid models derived from combined dense and sparse-in-time photometry. We discuss the reliability of asteroid shape models derived only from Catalina Sky Survey data (IAU code 703) and present 20 such models. By using different values for a scaling parameter cYORP (corresponds to the magnitude of the YORP momentum) in the dynamical model for the spin evolution and by comparing synthetics and observed pole-latitude distributions, we were able to constrain the typical values of the cYORP parameter as between 0.05 and 0.6.
△ Less
Submitted 29 January, 2013;
originally announced January 2013.
-
Analysis of the rotation period of asteroids (1865) Cerberus, (2100) Ra-Shalom, and (3103) Eger - search for the YORP effect
Authors:
J. Durech,
D. Vokrouhlicky,
A. R. Baransky,
S. Breiter,
O. A. Burkhonov,
W. Cooney,
V. Fuller,
N. M. Gaftonyuk,
J. Gross,
R. Ya. Inasaridze,
M. Kaasalainen,
Yu. N. Krugly,
O. I. Kvaratshelia,
E. A. Litvinenko,
B. Macomber,
F. Marchis,
I. E. Molotov,
J. Oey,
D. Polishook,
J. Pollock,
P. Pravec,
K. Sarneczky,
V. G. Shevchenko,
I. Slyusarev,
R. Stephens
, et al. (6 additional authors not shown)
Abstract:
The spin state of small asteroids can change on a long timescale by the Yarkovsky-O'Keefe-Radzievskii-Paddack (YORP) effect, the net torque that arises from anisotropically scattered sunlight and proper thermal radiation from an irregularly-shaped asteroid. The secular change in the rotation period caused by the YORP effect can be detected by analysis of asteroid photometric lightcurves. We analyz…
▽ More
The spin state of small asteroids can change on a long timescale by the Yarkovsky-O'Keefe-Radzievskii-Paddack (YORP) effect, the net torque that arises from anisotropically scattered sunlight and proper thermal radiation from an irregularly-shaped asteroid. The secular change in the rotation period caused by the YORP effect can be detected by analysis of asteroid photometric lightcurves. We analyzed photometric lightcurves of near-Earth asteroids (1865) Cerberus, (2100) Ra-Shalom, and (3103) Eger with the aim to detect possible deviations from the constant rotation caused by the YORP effect. We carried out new photometric observations of the three asteroids, combined the new lightcurves with archived data, and used the lightcurve inversion method to model the asteroid shape, pole direction, and rotation rate. The YORP effect was modeled as a linear change in the rotation rate in time dω/dt. Values of dω/ dt derived from observations were compared with the values predicted by theory. We derived physical models for all three asteroids. We had to model Eger as a nonconvex body because the convex model failed to fit the lightcurves observed at high phase angles. We probably detected the acceleration of the rotation rate of Eger dω/ dt = (1.4 +/- 0.6) x 10^{-8} rad/d (3σerror), which corresponds to a decrease in the rotation period by 4.2 ms/yr. The photometry of Cerberus and Ra-Shalom was consistent with a constant-period model, and no secular change in the spin rate was detected. We could only constrain maximum values of |dω/ dt| < 8 x 10^{-9} rad/d for Cerberus, and |dω/ dt| < 3 x 10^{-8} rad/d for Ra-Shalom.
△ Less
Submitted 8 October, 2012;
originally announced October 2012.
-
A study of asteroid pole-latitude distribution based on an extended set of shape models derived by the lightcurve inversion method
Authors:
Josef Hanus,
Josef Durech,
Miroslav Broz,
Brian D. Warner,
Frederick Pilcher,
Robert Stephens,
Julian Oey,
Laurent Bernasconi,
Silvano Casulli,
Raoul Behrend,
David Polishook,
Tomas Henych,
Martin Lehky,
Fumi Yoshida,
Takashi Ito
Abstract:
Tens of thousands of sparse-in-time lightcurves from astrometric projects are publicly available. We investigate these data and use them in the lightcurve inversion method to derive new asteroid models. By having a greater number of models with known physical properties, we can gain a better insight into the nature of individual objects and into the whole asteroid population. We use sparse photome…
▽ More
Tens of thousands of sparse-in-time lightcurves from astrometric projects are publicly available. We investigate these data and use them in the lightcurve inversion method to derive new asteroid models. By having a greater number of models with known physical properties, we can gain a better insight into the nature of individual objects and into the whole asteroid population. We use sparse photometry from selected observatories from the AstDyS database, either alone or in combination with dense lightcurves, to determine new asteroid models by the lightcurve inversion method. We present 80 new asteroid models derived from combined data sets where sparse photometry is taken from the AstDyS database and dense lightcurves are from the Uppsala Asteroid Photometric Catalogue (UAPC) and from several individual observers. For 18 asteroids, we present updated shape solutions based on new photometric data. The addition of new models increases the total number of models derived by the lightcurve inversion method to ~200. We also present a simple statistical analysis of physical properties of asteroids where we look for possible correlations between various physical parameters with an emphasis on the spin vector. We present the observed and de-biased distributions of ecliptic latitudes with respect to different size ranges of asteroids as well as a simple theoretical model of the latitude distribution and then compare its predictions with the observed distributions. From this analysis we find that the latitude distribution of small asteroids (D < 30 km) is clustered towards ecliptic poles and can be explained by the YORP thermal effect while the latitude distribution of larger asteroids (D > 60 km) exhibits an evident excess of prograde rotators, probably of primordial origin.
△ Less
Submitted 20 April, 2011;
originally announced April 2011.
