Showing 1–7 of 7 results for author: Shortt, B

A compact instrument for gamma-ray burst detection on a CubeSat platform II: Detailed design, assembly and validation

Authors: David Murphy, Alexey Ulyanov, Sheila McBreen, Joseph Mangan, Rachel Dunwoody, Maeve Doyle, Conor O'Toole, Joseph Thompson, Jack Reilly, Sarah Walsh, Brian Shortt, Antonio Martin-Carrillo, Lorraine Hanlon

Abstract: The Gamma-ray Module, GMOD, is a miniaturised novel gamma-ray detector which will be the primary scientific payload on the Educational Irish Research Satellite (EIRSAT-1) 2U CubeSat mission. GMOD comprises a compact (25mm $\times$ 25mm $\times$ 40mm) cerium bromide scintillator coupled to a tiled array of 4$\times$4 silicon photomultipliers, with front-end readout provided by the IDE3380 SIPHRA. T… ▽ More The Gamma-ray Module, GMOD, is a miniaturised novel gamma-ray detector which will be the primary scientific payload on the Educational Irish Research Satellite (EIRSAT-1) 2U CubeSat mission. GMOD comprises a compact (25mm $\times$ 25mm $\times$ 40mm) cerium bromide scintillator coupled to a tiled array of 4$\times$4 silicon photomultipliers, with front-end readout provided by the IDE3380 SIPHRA. This paper presents the detailed GMOD design and the accommodation of the instrument within the restrictive CubeSat form factor. The electronic and mechanical interfaces are compatible with many off-the-shelf CubeSat systems and structures. The energy response of the GMOD engineering qualification model has been determined using radioactive sources, and an energy resolution of 5.4% at 662keV has been measured. EIRSAT-1 will perform on-board processing of GMOD data. Trigger results, including light-curves and spectra, will be incorporated into the spacecraft beacon and transmitted continuously. Inexpensive hardware can be used to decode the beacon signal, making the data accessible to a wide community. GMOD will have scientific capability for the detection of gamma-ray bursts, in addition to the educational and technology demonstration goals of the EIRSAT-1 mission. The detailed design and measurements to date demonstrate the capability of GMOD in low Earth orbit, the scalability of the design for larger CubeSats and as an element of future large gamma-ray missions. △ Less

Submitted 7 March, 2022; originally announced March 2022.

Comments: 31 pages, 16 figures. This is an author accepted manuscript of an article accepted for publication in Experimental Astronomy. The final open-access version will be available at: https://doi.org/10.1007/s10686-022-09842-z

Embedded Firmware Development for a Novel CubeSat Gamma-Ray Detector

Authors: Joseph Mangan, David Murphy, Rachel Dunwoody, Maeve Doyle, Alexey Ulyanov, Lorraine Hanlon, Brian Shortt, Sheila McBreen, Masoud Emam, Jessica Erkal, Joe Flanagan, Gianluca Fontanesi, Andrew Gloster, Conor O'Toole, Favour Okosun, Rakhi RajagopalanNair, Jack Reilly, Lána Salmon, Daire Sherwin, Joseph Thompson, Sarah Walsh, Daithí de Faoite, Mike Hibbett, Umair Javaid, Fergal Marshall , et al. (4 additional authors not shown)

Abstract: The Gamma-ray Module (GMOD) is an experiment designed for the detection of gamma-ray bursts in low Earth orbit as the principal scientific payload on a 2-U CubeSat, EIRSAT-1. GMOD comprises a cerium bromide scintillator coupled to silicon photomultipliers which are processed and digitised by a bespoke ASIC. Custom firmware on the GMOD motherboard has been designed, implemented and tested for the M… ▽ More The Gamma-ray Module (GMOD) is an experiment designed for the detection of gamma-ray bursts in low Earth orbit as the principal scientific payload on a 2-U CubeSat, EIRSAT-1. GMOD comprises a cerium bromide scintillator coupled to silicon photomultipliers which are processed and digitised by a bespoke ASIC. Custom firmware on the GMOD motherboard has been designed, implemented and tested for the MSP430 microprocessor which manages the experiment including readout, storage and configuration of the system. The firmware has been verified in a series of experiments testing the response over a realistic range of input detector trigger frequencies from 50Hz to 1kHz for the primary time tagged event (TTE) data. The power consumption and ability of the firmware to successfully receive and transmit the packets to the on-board computer was investigated. The experiment demonstrated less than 1% loss of packets up to 1kHz for the standard transfer mode with the power not exceeding 31mW. The transfer performance and power consumption demonstrated are within the required range of this CubeSat instrument. △ Less

Submitted 4 November, 2021; originally announced November 2021.

Comments: 9 pages, 5 figures. This paper was presented at the 8th IEEE International Conference on Space Mission Challenges for Information Technology, July 26-30, 2021, and will appear in the conference proceedings. This work has been submitted to the IEEE for publication. Copyright may be transferred without notice, after which this version may no longer be accessible

A compact instrument for gamma-ray burst detection on a CubeSat platform I: Design drivers and expected performance

Authors: David Murphy, Alexey Ulyanov, Sheila McBreen, Maeve Doyle, Rachel Dunwoody, Joseph Mangan, Joseph Thompson, Brian Shortt, Antonio Martin-Carrillo, Lorraine Hanlon

Abstract: The Educational Irish Research Satellite 1 (EIRSAT-1) is a 2U CubeSat being developed under ESA's Fly Your Satellite! programme. The project has many aspects, which are primarily educational, but also include space qualification of new detector technologies for gamma-ray astronomy and the detection of gamma-ray bursts (GRBs). The Gamma-ray Module (GMOD), the main mission payload, is a small gamma-… ▽ More The Educational Irish Research Satellite 1 (EIRSAT-1) is a 2U CubeSat being developed under ESA's Fly Your Satellite! programme. The project has many aspects, which are primarily educational, but also include space qualification of new detector technologies for gamma-ray astronomy and the detection of gamma-ray bursts (GRBs). The Gamma-ray Module (GMOD), the main mission payload, is a small gamma-ray spectrometer comprising a 25 mm $\times$ 25 mm $\times$ 40 mm cerium bromide scintillator coupled to an array of 16 silicon photomultipliers. The readout is provided by IDE3380 (SIPHRA), a low-power and radiation tolerant readout ASIC. GMOD will detect gamma-rays and measure their energies in a range from tens of keV to a few MeV. Monte Carlo simulations were performed using the Medium Energy Gamma-ray Astronomy Library to evaluate GMOD's capability for the detection of GRBs in low Earth orbit. The simulations used a detailed mass model of the full spacecraft derived from a very high-fidelity 3D CAD model. The sky-average effective area of GMOD on board EIRSAT-1 was found to be 10 cm$^2$ at 120 keV. The instrument is expected to detect between 11 and 14 GRBs, at a significance greater than 10$σ$ (and up to 32 at 5$σ$), during a nominal one-year mission. The shape of the scintillator in GMOD results in omni-directional sensitivity which allows for a nearly all-sky field of view. △ Less

Submitted 18 August, 2021; originally announced August 2021.

Comments: 27 pages, 13 figures. This is an author accepted manuscript of an article published in Experimental Astronomy. The final open-access version is available at: https://doi.org/10.1007/s10686-021-09779-9

A smartphone-based arbitrary scene projector for detector testing and instrument performance evaluation

Authors: Thibaut Prod'homme, Patricia Liebing, Peter Verhoeve, Ilya Menyaylov, Frédéric Lemmel, Hans Smit, Sander Blommaert, Dennis Breeveld, Brian Shortt

Abstract: Using the high-resolution OLED screen of a smartphone to project arbitrary scenes and patterns can open a complete new dimension for testing sensors in the visible. Based on an original concept from JPL (Jet Propulsion Laboratory), this contribution describes a new experimental setup designed to achieve the demanding performance of its first application by ESA (European Space Agency): the evaluati… ▽ More Using the high-resolution OLED screen of a smartphone to project arbitrary scenes and patterns can open a complete new dimension for testing sensors in the visible. Based on an original concept from JPL (Jet Propulsion Laboratory), this contribution describes a new experimental setup designed to achieve the demanding performance of its first application by ESA (European Space Agency): the evaluation of radiation-induced CTI (Charge Transfer Inefficiency) on Euclid's weak lensing measurement. We show that pushed to its limits especially in terms of calibration such a simple experiment can deliver a level of optical performance high enough to be applied in the verification of high-precision astronomy instrument performance. △ Less

Submitted 9 December, 2020; originally announced December 2020.

Radiation Damage Study of SensL J-Series Silicon Photomultipliers Using 101.4 MeV Protons

Authors: Alexei Ulyanov, David Murphy, Joseph Mangan, Viyas Gupta, Wojciech Hajdas, Daithi de Faoite, Brian Shortt, Lorraine Hanlon, Sheila McBreen

Abstract: Radiation damage of J-series silicon photomultipliers (SiPMs) has been studied in the context of using these photodetectors in future space-borne scintillation detectors. Several SiPM samples were exposed to 101.4 MeV protons, with 1 MeV neutron equivalent fluence ranging from 1.27*10^8 n/cm^2 to 1.23*10^10 n/cm^2 . After the irradiation, the SiPMs experienced a large increase in the dark current… ▽ More Radiation damage of J-series silicon photomultipliers (SiPMs) has been studied in the context of using these photodetectors in future space-borne scintillation detectors. Several SiPM samples were exposed to 101.4 MeV protons, with 1 MeV neutron equivalent fluence ranging from 1.27*10^8 n/cm^2 to 1.23*10^10 n/cm^2 . After the irradiation, the SiPMs experienced a large increase in the dark current and noise, which may pose problems for long-running space missions in terms of power consumption, thermal control and detection of low-energy events. Measurements performed with a CeBr3 scintillator crystal showed that after exposure to 1.23*10^10 n/cm^2 and following room-temperature annealing, the dark noise of a single 6 mm square SiPM at room temperature increased from 0.1 keV to 2 keV. Because of the large SiPM noise, the gamma-ray detection threshold increased to approximately 20 keV for a CeBr3 detector using a 4-SiPM array and 40 keV for a detector using a 16-SiPM array. Only a small effect of the proton irradiation on the average detector signal was observed, suggesting no or little change to the SiPM gain and photon detection efficiency. △ Less

Submitted 21 July, 2020; originally announced July 2020.

Comments: Published in Nuclear Instruments and Methods in Physics Research Section A

Journal ref: Nuclear Instruments and Methods in Physics Research Section A, Volume 976 (2020), 164203

Localisation of gamma-ray interaction points in thick monolithic CeBr3 and LaBr3:Ce scintillators

Authors: Alexei Ulyanov, Oran Morris, Oliver J. Roberts, Isaac Tobin, Lorraine Hanlon, Sheila McBreen, David Murphy, Nick Nelms, Brian Shortt

Abstract: Localisation of gamma-ray interaction points in monolithic scintillator crystals can simplify the design and improve the performance of a future Compton telescope for gamma-ray astronomy. In this paper we compare the position resolution of three monolithic scintillators: a 28x28x20 mm3 (length x breadth x thickness) LaBr3:Ce crystal, a 25x25x20 mm3 CeBr3 crystal and a 25x25x10 mm3 CeBr3 crystal. E… ▽ More Localisation of gamma-ray interaction points in monolithic scintillator crystals can simplify the design and improve the performance of a future Compton telescope for gamma-ray astronomy. In this paper we compare the position resolution of three monolithic scintillators: a 28x28x20 mm3 (length x breadth x thickness) LaBr3:Ce crystal, a 25x25x20 mm3 CeBr3 crystal and a 25x25x10 mm3 CeBr3 crystal. Each crystal was encapsulated and coupled to an array of 4x4 silicon photomultipliers through an optical window. The measurements were conducted using 81 keV and 356 keV gamma-rays from a collimated 133Ba source. The 3D position reconstruction of interaction points was performed using artificial neural networks trained with experimental data. Although the position resolution was significantly better for the thinner crystal, the 20 mm thick CeBr3 crystal showed an acceptable resolution of about 5.4 mm FWHM for the x and y coordinates, and 7.8 mm FWHM for the z-coordinate (crystal depth) at 356 keV. These values were obtained from the full position scans of the crystal sides. The position resolution of the LaBr3:Ce crystal was found to be considerably worse, presumably due to the highly diffusive optical in- terface between the crystal and the optical window of the enclosure. The energy resolution (FWHM) measured for 662 keV gamma-rays was 4.0% for LaBr3:Ce and 5.5% for CeBr3. The same crystals equipped with a PMT (Hamamatsu R6322-100) gave an energy resolution of 3.0% and 4.7%, respectively. △ Less

Submitted 19 January, 2017; originally announced January 2017.

Journal ref: Nuclear Inst. and Methods in Physics Research, A 844C (2017) pp. 81-89

Development of large radii half-wave plates for CMB satellite missions

Authors: G. Pisano, B. Maffei, M. W. Ng, V. Haynes, M. Brown, F. Noviello, P. de Bernardis, S. Masi, F. Piacentini, L. Pagano, M. Salatino, B. Ellison, M. Henry, P. de Maagt, B. Shortt

Abstract: The successful European Space Agency (ESA) Planck mission has mapped the Cosmic Microwave Background (CMB) temperature anisotropy with unprecedented accuracy. However, Planck was not designed to detect the polarised components of the CMB with comparable precision. The BICEP2 collaboration has recently reported the first detection of the B-mode polarisation. ESA is funding the development of critic… ▽ More The successful European Space Agency (ESA) Planck mission has mapped the Cosmic Microwave Background (CMB) temperature anisotropy with unprecedented accuracy. However, Planck was not designed to detect the polarised components of the CMB with comparable precision. The BICEP2 collaboration has recently reported the first detection of the B-mode polarisation. ESA is funding the development of critical enabling technologies associated with B-mode polarisation detection, one of these being large diameter half-wave plates. We compare different polarisation modulators and discuss their respective trade-offs in terms of manufacturing, RF performance and thermo-mechanical properties. We then select the most appropriate solution for future satellite missions, optimized for the detection of B-modes. △ Less

Submitted 30 September, 2014; originally announced September 2014.

Comments: 16 pages

Journal ref: Proceedings of the SPIE Astronomical Telescopes + Instrumentation 2014 Conference, Vol 9153, Millimeter, Submillimeter, and Far-Infrared Detectors and Instrumentation for Astronomy VII, 915317 (23 July 2014)