Showing 1–50 of 56 results for author: Safonova, M

AstroSat/UVIT Study of the Diffuse Ultraviolet Radiation in the Dwarf Galaxy Holmberg II

Authors: Olag Pratim Bordoloi, B. Ananthamoorthy, P. Shalima, Margarita Safonova, Debbijoy Bhattacharya, Yuri A. Shchekinov, Rupjyoti Gogoi

Abstract: We present measurements of diffuse ultraviolet emission in the dwarf irregular galaxy Holmberg II obtained with the UltraViolet Imaging Telescope (UVIT) onboard AstroSat. With a spatial resolution of 1.2 to 1.6 arcsec, these are the highest resolution UV observations of the galaxy to date. We find that diffuse emission accounts for 70.6 % (58.1 %) of the total FUV(NUV) emission, respectively. We p… ▽ More We present measurements of diffuse ultraviolet emission in the dwarf irregular galaxy Holmberg II obtained with the UltraViolet Imaging Telescope (UVIT) onboard AstroSat. With a spatial resolution of 1.2 to 1.6 arcsec, these are the highest resolution UV observations of the galaxy to date. We find that diffuse emission accounts for 70.6 % (58.1 %) of the total FUV(NUV) emission, respectively. We perform a UV-IR correlation study of the diffuse emission in this galaxy using infrared observations from Spitzer Space Telescope and Herschel Space Observatory for selected locations, free of detectable bright point sources. The strongest positive correlation between FUV and IR is observed at 70 micron for high HI density locations, indicating that warm dust grains dominate the IR emission, in agreement with earlier studies, while NUV is better correlated with 160 micron emission associated with cold dust grains. Low HI density regions or cavities, do not show any significant UV-IR correlation except at 160 micron, implying either the presence of colder dust grains in cavities, being irradiated by the general radiation field, or insufficient amount of dust. The dust scattering contribution in high HI density regions, estimated using a single scattering model with foreground dust clouds with LMC reddening, gives best-fit albedo and asymmetry factor values of 0.2 and 0.5, respectively, in reasonable agreement with the theoretical predictions for LMC dust. Our model derived scattering optical depths in the FUV range from 0.02 to 0.12, implying the medium is optically thin. Therefore, in high HI density regions, dust scattering can be one the sources of the observed diffuse UV emission, apart from possible contributions from molecular hydrogen fluorescence, However, the diffuse UV component in HI cavities can only be explained via other mechanisms, such as two photon emission. △ Less

Submitted 4 July, 2024; originally announced July 2024.

Comments: 25 pages, 11 figures, accepted for publication in PASP

Comet C/2012 S1 (ISON) crossing the Jupiter orbit

Authors: Margarita Safonova, Noah Brosch, Shai Kaspi, David Polishook, R. Michael Rich, Firoza Sutaria, Jayant Murthy

Abstract: We report results of intensive time-resolved imaging photometry and synoptic deep imaging of the comet C/2012 S1 (ISON) performed in February 2013. The data were obtained at the Wise Observatory in Israel (WO), at the Himalayan Chandra Telescope (HCT) in India, and at the Polaris Observatory Association in California, USA. During this period, the comet's heliocentric distance changed from 4.9 to 4… ▽ More We report results of intensive time-resolved imaging photometry and synoptic deep imaging of the comet C/2012 S1 (ISON) performed in February 2013. The data were obtained at the Wise Observatory in Israel (WO), at the Himalayan Chandra Telescope (HCT) in India, and at the Polaris Observatory Association in California, USA. During this period, the comet's heliocentric distance changed from 4.9 to 4.6 AU, just within the orbit of Jupiter. We analyze these early images in an attempt to determine the nuclear rotation period, assuming that at these relatively large heliocentric distances it would be possible to detect the photometric modulation of a rotating nucleus against an underdeveloped coma. Since this is not evident in our February 2013 data, with more than 400 independent photometric measurements analyzed, we can only set upper limits of 0.05 mag for periodic brightness modulations. We discuss (and discount) a possible brightening event (minor outburst) that occurred on $15-16$ February 2013. We also present deep synoptic images of the comet, obtained by combining our exposures for each night, and analyze them. We find that during the period of our observations the comet exhibited a $\sim$$30^{\prime\prime}\simeq 60000$-km tail with no substructures visible and that this appearance did not change throughout our campaign. The comet, as indicated by a single spectroscopic measurement obtained during this observation period, showed a dust coma reflecting the solar light. Our observations indicate that during February 2013, comet ISON was relatively quiet, with the dust coma presumably hiding any light modulation by a spinning nucleus. △ Less

Submitted 30 June, 2024; originally announced July 2024.

Comments: 15 pages, 10 figures

Spectroscopic Investigation of Nebular Gas (SING): Instrument Design, Assembly and Calibration

Authors: Bharat Chandra P, Binukumar G. Nair, Shubham Jankiram Ghatul, Shubhangi Jain, S. Sriram, Mahesh Babu S., Rekhesh Mohan, Margarita Safonova, Jayant Murthy, Mikhail Sachkov

Abstract: The Spectroscopic Investigation of Nebular Gas (SING) is a near-ultraviolet (NUV) low-resolution spectrograph payload designed to operate in the NUV range, 1400 $\unicode{x212B}$ -- 2700 $\unicode{x212B}$, from a stable space platform. SING telescope has a primary aperture of 298 mm, feeding the light to the long-slit UV spectrograph. SING has a field of view (FOV) of 1$^{\circ}$, achieving a spat… ▽ More The Spectroscopic Investigation of Nebular Gas (SING) is a near-ultraviolet (NUV) low-resolution spectrograph payload designed to operate in the NUV range, 1400 $\unicode{x212B}$ -- 2700 $\unicode{x212B}$, from a stable space platform. SING telescope has a primary aperture of 298 mm, feeding the light to the long-slit UV spectrograph. SING has a field of view (FOV) of 1$^{\circ}$, achieving a spatial resolution of 1.33 arc minute and spectral resolution of 3.7 $\unicode{x212B}$ ($R\sim600$) at the central wavelength. SING employs a micro-channel plate (MCP) with a CMOS readout-based photon-counting detector. The instrument is designed to observe diffuse sources such as nebulae, supernova remnants, and the interstellar medium (ISM) to understand their chemistry. SING was selected by the United Nations Office for Outer Space Affairs to be hosted on the Chinese Space Station. The instrument will undergo qualification tests as per the launch requirements. In this paper, we describe the hardware design, optomechanical assembly, and calibration of the instrument. △ Less

Submitted 26 April, 2024; originally announced April 2024.

Journal ref: Exp Astron 57, 18 (2024)

Development Of Raspberry Pi-based Processing Unit for UV Photon-Counting Detectors

Authors: Bharat Chandra P, Binukumar G., Shubham Janakiram, Mahesh Babu, Shubhangi Jain, Richa Rai, Rekhesh Mohan, Margarita Safonova, Jayant Murthy

Abstract: In ultraviolet (UV) astronomical observations, photons from the sources are very few compared to the visible or infrared (IR) wavelength ranges. Detectors operating in the UV usually employ a photon-counting mode of operation. These detectors usually have an image intensifier sensitive to UV photons and a readout mechanism that employs photon counting. The development of readouts for these detecto… ▽ More In ultraviolet (UV) astronomical observations, photons from the sources are very few compared to the visible or infrared (IR) wavelength ranges. Detectors operating in the UV usually employ a photon-counting mode of operation. These detectors usually have an image intensifier sensitive to UV photons and a readout mechanism that employs photon counting. The development of readouts for these detectors is resource-intensive and expensive. In this paper, we describe the development of a low-cost UV photon-counting detector processing unit that employs a Raspberry Pi with its in built readout to perform the photon-counting operation. Our system can operate in both 3x3 and 5x5 window modes at 30 frames per sec (fps), where 5x5 window mode also enables the provision of detection of double events. The system can be built quickly from readily available custom-off-the-shelf (COTS) components and is thus used in inexpensive CubeSats or small satellite missions. This low-cost solution promises to broaden access to UV observations, advancing research possibilities in space-based astronomy. △ Less

Submitted 5 January, 2024; v1 submitted 2 January, 2024; originally announced January 2024.

Journal ref: Journal of Astronomical Instrumentation, 2024

Multi-wavelength photometric study of five contact binaries in the field of globular cluster M4

Authors: Shanti Priya Devarapalli, Rukmini Jagirdar, Ravi Raja Pothuneni, Dereje Wakgari Amente, Vineet Thomas, Margarita Safonova, Noah Brosch

Abstract: Binary stars are believed to be key determinants in understanding globular cluster evolution. In this paper, we present the Multi-band photometric analyses of five variables in the nearest galactic globular cluster M4, from the observations of CASE, M4 Core Project with HST for four variables (V48, V49, V51, and V55) and the data collected from T40 and C18 Telescopes of Wise Observatory for one va… ▽ More Binary stars are believed to be key determinants in understanding globular cluster evolution. In this paper, we present the Multi-band photometric analyses of five variables in the nearest galactic globular cluster M4, from the observations of CASE, M4 Core Project with HST for four variables (V48, V49, V51, and V55) and the data collected from T40 and C18 Telescopes of Wise Observatory for one variable (NV4). The light curves of five binaries are analyzed using the Wilson-Devinney method (WD) and their fundamental parameters have been derived. A period variation study was carried out using times of minima obtained from the literature for four binaries and the nature of the variation observed is discussed. The evolutionary state of systems is evaluated using M-R diagram, correlating with that of a few well-studied close binaries in other globular clusters. Based on the data obtained from the Gaia DR3 database, a three-dimensional Vector-Point Diagrams (VPD) was built to evaluate the cluster membership of the variables, and two out of them (V49 and NV4) were found to be not cluster members. △ Less

Submitted 14 November, 2023; v1 submitted 12 November, 2023; originally announced November 2023.

Journal ref: New Astronomy, Vol. 107, 2024, 102150

Deep Photometry of Suspected Gravitational Lensing Events: Potential Detection of a Cosmic String

Authors: Margarita Safonova, Igor I. Bulygin, Olga S. Sazhina, Mikhail V. Sazhin, Priya Hasan, Firoza Sutaria

Abstract: Cosmic strings (CS) are one-dimensional cosmological-size objects predicted in realistic models of the early Universe. Analysis of the cosmic microwave background (CMB) anisotropy data from the Wilkinson Microwave Anisotropy Probe (WMAP) and Planck surveys revealed several CS candidates. One of the candidates, CSc-1, was found to be most reliable because of the statistically significant chains of… ▽ More Cosmic strings (CS) are one-dimensional cosmological-size objects predicted in realistic models of the early Universe. Analysis of the cosmic microwave background (CMB) anisotropy data from the Wilkinson Microwave Anisotropy Probe (WMAP) and Planck surveys revealed several CS candidates. One of the candidates, CSc-1, was found to be most reliable because of the statistically significant chains of gravitational lensing (GL) candidates in its field. We observed the brightest of the objects in the CSc-1 field, a galaxy pair SDSSJ110429.61+233150.3. The significant correlation between the spectra of the two components indicates the possible GL nature of the pair. Our simulations of observational data in the CSc-1 field shows that a large number of pairs can be explained by the complex geometry of the CS. Simulations of the SDSSJ110429 galaxy pair has shown that the observed angle between the components of the pair can be explained if the CS is strongly inclined and, possibly, bent in the image plane. In our preliminary data, we also detected the sign of the sharp isophotal edge in one image, which along with CMB and spectral data strongly suggests the possibility of a CS detection. △ Less

Submitted 21 September, 2023; originally announced September 2023.

Comments: 6 pages, 4 figures, Accepted at the Bulletin de la Société Royale des Sciences de Liège, 2023

Making Habitable Worlds: Planets Versus Megastructures

Authors: Raghav Narasimha, Margarita Safonova, C. Sivaram

Abstract: In 2016, a star KIC 8462852 caught the world's attention due to a paper by citizen scientists who noticed its seemingly unexplainable brightness variations. The forward theory was offered - KIC 8462852 is surrounded by a Dyson sphere, a megastructure made by an alien civilization to collect all energy output from their star. Finally, in 2018, its light curve showed chromaticity more characteristic… ▽ More In 2016, a star KIC 8462852 caught the world's attention due to a paper by citizen scientists who noticed its seemingly unexplainable brightness variations. The forward theory was offered - KIC 8462852 is surrounded by a Dyson sphere, a megastructure made by an alien civilization to collect all energy output from their star. Finally, in 2018, its light curve showed chromaticity more characteristic of the dust (from comets or asteroids) rather than of something made from solid material, but the world was woken up to the idea of megastructures. But, in Dyson's time, only Solar System planets were known; it took more than 20 years to realize that nature has no problem making planets and does it with a flair -- the total number of planets in the Galaxy is estimated to be in billions. With such abundance of planets, there would be no need to destroy the entire planetary system to make one sphere. Instead, a civilization can expand to a system that has planet(s) in the habitable zone (HZ), or a planet can be moved into it. Alternatively, a free-floating planet (FFP) can be captured and moved into the HZ. These shifts can be performed at a constant low-thrust acceleration using high power directional lasers, resulting in a gradual spiral transfer from one orbit to another. We propose here to search for ETI by looking for high-power laser technosignatures and consider merits of such signatures. We suggest to specifically pay attention to the multiple planetary systems that have Strange Exoplanetary Architectures (SEA) - unusual planetary arrangements that cannot be explained by current planetary formation theories, because these could be the result of ETI moving planets intentionally to suit their needs. △ Less

Submitted 22 September, 2023; v1 submitted 8 September, 2023; originally announced September 2023.

Comments: 11 page, 7 figures

Unravelling multi-temperature dust populations in the dwarf galaxy Holmberg II

Authors: Olag Pratim Bordoloi, Yuri A. Shchekinov, P. Shalima, M. Safonova, Rupjyoti Gogoi

Abstract: Holmberg II - a dwarf galaxy in the nearby M81 group - is a very informative source of distribution of gas and dust in the interstellar discs. High-resolution observations in the infrared (IR) allows us to distinguish isolated star-forming regions, photodissociation (PDR) and HII regions, remnants of supernovae (SNe) explosions and, as such, can provide information about more relevant physical pro… ▽ More Holmberg II - a dwarf galaxy in the nearby M81 group - is a very informative source of distribution of gas and dust in the interstellar discs. High-resolution observations in the infrared (IR) allows us to distinguish isolated star-forming regions, photodissociation (PDR) and HII regions, remnants of supernovae (SNe) explosions and, as such, can provide information about more relevant physical processes. In this paper we analyse dust emission in the wavelength range 4.5 to 160 micron using the data from IR space observatories at 27 different locations across the galaxy. We observe that the derived spectra can be represented by multiple dust populations with different temperatures, which are found to be independent of their locations in the galaxy. By comparing the dust temperatures with the far ultraviolet (FUV) intensities observed by the UVIT instrument onboard AstroSat, we find that for locations showing a 100 micron peak, the temperature of cold (20 to 30 K) dust grains show a dependence on the FUV intensities, while such dependence is not observed for the other locations. We believe that the approach described here can be a good tool in revealing different dust populations in other nearby galaxies with available high spatial resolution data. △ Less

Submitted 31 August, 2023; originally announced August 2023.

Comments: 7 pages, 4 figures, submitted to Letters to MNRAS

$β$-SGP: Scaled Gradient Projection with $β$-divergence for astronomical image restoration

Authors: Yash Gondhalekar, Margarita Safonova, Snehanshu Saha

Abstract: Image restoration in astronomy has been considered a vital step in many ground-based observational programs that often suffer from sub-optimal seeing due to atmospheric turbulence, distortion of stellar shapes due to instrumental aberrations, trailing, and other issues. It holds importance for various tasks: improved astrometry, deblending of overlapping sources, faint source detection, and identi… ▽ More Image restoration in astronomy has been considered a vital step in many ground-based observational programs that often suffer from sub-optimal seeing due to atmospheric turbulence, distortion of stellar shapes due to instrumental aberrations, trailing, and other issues. It holds importance for various tasks: improved astrometry, deblending of overlapping sources, faint source detection, and identification of point sources near bright extended objects, such as galaxies, to name a few. We conduct an empirical study by applying the Scaled Gradient Projection (SGP) iterative image deconvolution algorithm to restore distorted stellar shapes in our observed data. We investigate using a more flexible divergence measure, the $β$-divergence, which contains the commonly-used Kullback-Leibler (KL) divergence as a special case and allows automatic adaptation of the parameter $β$ to the data. An extensive set of experiments comparing the performance of SGP and its $β$-divergence variant ($β$-SGP) is carried out on extracted star stamps and on images containing multiple stars (both crowded and relatively sparser fields). We show a consistent enhancement in the flux conservation across all considered scenarios using $β$-SGP compared to SGP. Using a few quantifiable metrics such as the Full-Width-at-Half-Maximum (FWHM) and ellipticity of stars, we observe that $β$-SGP improves restoration quality, compared to the SGP, in many cases and still preserves restoration quality in others. We conclude that generalized versions of image restoration algorithms are more robust due to their enhanced flexibility and could be a promising modification for astronomical image restoration. △ Less

Submitted 20 April, 2023; v1 submitted 22 July, 2022; originally announced July 2022.

Comments: Submitted to Astronomy and Computing

Journal ref: Astronomy and Computing, Vol. 44, 2023, 100739

Low-Cost Raspberry Pi Star Sensor for Small Satellites

Authors: Bharat Chandra P, Mayuresh Sarpotdar, Binukumar G. Nair, Richa Rai, Rekhesh Mohan, Joice Mathew, Margarita Safonova, Jayant Murthy

Abstract: We present here a low-cost Raspberry Pi (RPi)-based star sensor StarberrySense using commercial-off-the-shelf (COTS) components, developed and built for applications in small satellites and CubeSat-based missions. A star sensor is one of the essential instruments onboard a satellite for attitude determination. However, most commercially available star sensors are expensive and bulky to be used in… ▽ More We present here a low-cost Raspberry Pi (RPi)-based star sensor StarberrySense using commercial-off-the-shelf (COTS) components, developed and built for applications in small satellites and CubeSat-based missions. A star sensor is one of the essential instruments onboard a satellite for attitude determination. However, most commercially available star sensors are expensive and bulky to be used in small satellite missions. StarberrySense is a configurable system -- it can operate as an imaging camera, a centroiding camera, or as a star sensor. We describe the algorithms implemented in the sensor, its assembly and calibration. This payload was selected by a recent Announcement of Opportunity call for payloads to fly on the PS4-Orbital Platform by the Indian Space Research Organization (ISRO). △ Less

Submitted 13 July, 2022; v1 submitted 7 July, 2022; originally announced July 2022.

Comments: J. Astron. Telesc. Instrum. Syst (Accepted)

Journal ref: J. of Astronomical Telescopes, Instruments, and Systems, 8(3), 036002 (2022)

Simultaneous X-ray/UV observations of ultraluminous X-ray source Holmberg II X-1 with Indian space mission AstroSat

Authors: A. Vinokurov, K. Atapin, O. P. Bordoloi, A. Sarkisyan, U. Kashyap, M. Chakraborty, P. T. Rahna, A. Kostenkov, Y. Solovyeva, S. Fabrika, M. Safonova, R. Gogoi, F. Sutaria, J. Murthy

Abstract: We present the results of 8 epochs of simultaneous UV and X-ray observations of the highly variable ultraluminous X-ray source (ULX) Holmberg II X-1 with AstroSat -- Indian multiwavelength space satellite. During the entire observation period from late 2016 to early 2020, Holmberg II X-1 showed a moderate X-ray luminosity of $8\times10^{39}$ erg/s and a hard power-law spectrum with… ▽ More We present the results of 8 epochs of simultaneous UV and X-ray observations of the highly variable ultraluminous X-ray source (ULX) Holmberg II X-1 with AstroSat -- Indian multiwavelength space satellite. During the entire observation period from late 2016 to early 2020, Holmberg II X-1 showed a moderate X-ray luminosity of $8\times10^{39}$ erg/s and a hard power-law spectrum with $Γ\lesssim 1.9$. Due to low variability of the object in X-rays (by a factor 1.5) and insignificant variability in the UV range (upper limit $\approx25$%) we could not find reliable correlation between flux changes in these ranges. Inside each particular observation, the X-ray variability amplitude is higher, it reaches a factor of 2-3 respect to the mean level at the time scales of $\sim10$ ks or even shorter. We discussed our results in terms of three models of a heated donor star, a heated disk and a heated wind, and estimated the lower limit to the variability which would allow to reject at least part of them. △ Less

Submitted 10 May, 2022; originally announced May 2022.

Comments: 16 pages, 5 figures, Submitted to Astrophysical Bulletin

Gravitational Lensing and Microlensing in Clusters: Clusters as Dark Matter Telescopes

Authors: Margarita Safonova

Abstract: Gravitational lensing is brightening of background objects due to deflection of light by foreground sources. Rich clusters of galaxies are very effective lenses because they are centrally concentrated. Such natural Gravitational Telescopes provide us with strongly magnified galaxies at high redshifts otherwise too faint to be detected or analyzed. With a lensing boost, we can study galaxies shinin… ▽ More Gravitational lensing is brightening of background objects due to deflection of light by foreground sources. Rich clusters of galaxies are very effective lenses because they are centrally concentrated. Such natural Gravitational Telescopes provide us with strongly magnified galaxies at high redshifts otherwise too faint to be detected or analyzed. With a lensing boost, we can study galaxies shining at the end of the `Dark Ages'. We propose to exploit the opportunity provided by the large field of view and depth, to search for sources magnified by foreground clusters in the vicinity of the cluster critical curves, where enhancements can be of several tens in brightness. Another aspect is microlensing (ML), where we would like to continue our survey of a number of Galactic globular clusters over time-scales of weeks to years to search for ML events from planets to hypothesized central intermediate-mass black holes (IMBH). △ Less

Submitted 15 January, 2022; originally announced January 2022.

Comments: 5 pages, 2 figures, presented at First Belgo-Indian Network for Astronomy & Astrophysics (BINA) workshop, Nainital, India, 15-18 November 2016, https://popups.uliege.be/0037-9565/index.php?id=7784

Journal ref: Bulletin de la Soci'et'e Royale des Sciences de Li`ege, Vol. 87, Actes de colloques, 2018, pp. 360-364

The Near Ultraviolet Transient Surveyor (NUTS): An ultraviolet telescope to observe variable sources

Authors: S. Ambily, Mayuresh Sarpotdar, Joice Mathew, Binukumar G. Nair, A. G. Sreejith, Nirmal K., Jayant Murthy, Margarita Safonova, Rekhesh Mohan, Vinod Kumar Aggarval, S. Nagabhushanam, Sachin Jeeragal

Abstract: Observing the ultraviolet (UV) sky for time-variable phenomena is one of the many exciting science goals that can be achieved by a relatively small aperture telescope in space. The Near Ultraviolet Transient Surveyor (NUTS) is a wide-field ($3^\circ$) imager with a photon-counting detector in the near-UV (NUV, 200-300 nm), to be flown on an upcoming small satellite mission. It has a Ritchey-Chreti… ▽ More Observing the ultraviolet (UV) sky for time-variable phenomena is one of the many exciting science goals that can be achieved by a relatively small aperture telescope in space. The Near Ultraviolet Transient Surveyor (NUTS) is a wide-field ($3^\circ$) imager with a photon-counting detector in the near-UV (NUV, 200-300 nm), to be flown on an upcoming small satellite mission. It has a Ritchey-Chretien (RC) telescope design with correction optics to enable wide-field observations while minimizing optical aberrations. We have used an intensified CMOS detector with a solar blind photocathode, to be operated in photon-counting mode. The main science goal of the instrument is the observation of transient sources in the UV, including flare stars, supernovae, and active galactic nuclei. NUTS's aperture size and effective area enable observation of relatively unexplored, brighter parts of the UV sky which are usually not accessible to larger missions. We have designed, fabricated, and assembled the instrument, and the final calibrations and environmental tests are being carried out. In this paper, we provide the scientific motivation and technical overview of the instrument and describe the assembly and calibration steps. △ Less

Submitted 7 January, 2022; originally announced January 2022.

Comments: 12 pages, 9 figures; Accepted for publication in Experimental Astronomy

Postulating Exoplanetary Habitability via a Novel Anomaly Detection Method

Authors: Jyotirmoy Sarkar, Kartik Bhatia, Snehanshu Saha, Margarita Safonova, Santonu Sarkar

Abstract: A profound shift in the study of cosmology came with the discovery of thousands of exoplanets and the possibility of the existence of billions of them in our Galaxy. The biggest goal in these searches is whether there are other life-harbouring planets. However, the question which of these detected planets are habitable, potentially-habitable, or maybe even inhabited, is still not answered. Some po… ▽ More A profound shift in the study of cosmology came with the discovery of thousands of exoplanets and the possibility of the existence of billions of them in our Galaxy. The biggest goal in these searches is whether there are other life-harbouring planets. However, the question which of these detected planets are habitable, potentially-habitable, or maybe even inhabited, is still not answered. Some potentially habitable exoplanets have been hypothesized, but since Earth is the only known habitable planet, measures of habitability are necessarily determined with Earth as the reference. Several recent works introduced new habitability metrics based on optimization methods. Classification of potentially habitable exoplanets using supervised learning is another emerging area of study. However, both modeling and supervised learning approaches suffer from drawbacks. We propose an anomaly detection method, the Multi-Stage Memetic Algorithm (MSMA), to detect anomalies and extend it to an unsupervised clustering algorithm MSMVMCA to use it to detect potentially habitable exoplanets as anomalies. The algorithm is based on the postulate that Earth is an anomaly, with the possibility of existence of few other anomalies among thousands of data points. We describe an MSMA-based clustering approach with a novel distance function to detect habitable candidates as anomalies (including Earth). The results are cross-matched with the habitable exoplanet catalog (PHL-HEC) of the Planetary Habitability Laboratory (PHL) with both optimistic and conservative lists of potentially habitable exoplanets. △ Less

Submitted 6 September, 2021; originally announced September 2021.

Comments: 12 pages, 3 figures, submitted to MNRAS

Quantifying the Classification of Exoplanets: in Search for the Right Habitability Metric

Authors: Margarita Safonova, Archana Mathur, Suryoday Basak, Kakoli Bora, Surbhi Agrawal

Abstract: What is habitability? Can we quantify it? What do we mean under the term habitable or potentially habitable planet? With estimates of the number of planets in our Galaxy alone running into billions, possibly a number greater than the number of stars, it is high time to start characterizing them, sorting them into classes/types just like stars, to better understand their formation paths, their prop… ▽ More What is habitability? Can we quantify it? What do we mean under the term habitable or potentially habitable planet? With estimates of the number of planets in our Galaxy alone running into billions, possibly a number greater than the number of stars, it is high time to start characterizing them, sorting them into classes/types just like stars, to better understand their formation paths, their properties and, ultimately, their ability to beget or sustain life. After all, we do have life thriving on one of these billions of planets, why not on others? Which planets are better suited for life and which ones are definitely not worth spending expensive telescope time on? We need to find sort of quick assessment score, a metric, using which we can make a list of promising planets and dedicate our efforts to them. Exoplanetary habitability is a transdisciplinary subject integrating astrophysics, astrobiology, planetary science, even terrestrial environmental sciences. We review the existing metrics of habitability and the new classification schemes of extrasolar planets and provide an exposition of the use of computational intelligence techniques to evaluate habitability scores and to automate the process of classification of exoplanets. We examine how solving convex optimization techniques, as in computing new metrics such as CDHS and CEESA, cross-validates ML-based classification of exoplanets. Despite the recent criticism of exoplanetary habitability ranking, this field has to continue and evolve to use all available machinery of astroinformatics, artificial intelligence and machine learning. It might actually develop into a sort of same scale as stellar types in astronomy, to be used as a quick tool of screening exoplanets in important characteristics in search for potentially habitable planets for detailed follow-up targets. △ Less

Submitted 7 April, 2021; originally announced April 2021.

Comments: 17 pages, 6 figures, in press

Journal ref: European Physics Journal ST Special issue on Modeling, Machine Learning and Astronomy, 2021, 1-14

The Curious Case of Argon

Authors: Margarita Safonova, Alfia Saini

Abstract: In the modern search for life elsewhere in the Universe, we are broadly looking for the following: the planets similar to Earth - physical indicators of habitability, and the manifestation of life - the biological signatures. A biosignature is a measured parameter that has a high probability of being caused by the living organisms, either atmospheric gas species or some surface features. Therefore… ▽ More In the modern search for life elsewhere in the Universe, we are broadly looking for the following: the planets similar to Earth - physical indicators of habitability, and the manifestation of life - the biological signatures. A biosignature is a measured parameter that has a high probability of being caused by the living organisms, either atmospheric gas species or some surface features. Therefore, the focus of a search is on a product or phenomena produced by the living systems, mostly by microorganisms as these are the most abundant on our planet like, say, methane. However, we may need to distinguish the terms `biosignature' and `bioindicator'. A biosignature is what living organisms produce - a bioproduct, while a bioindicator may be anything necessary for life as we know it, such as water or a rocky planet. Oxygen in this case is a double biomarker; first, it is a byproduct of oxygenic photosynthesis and, second, it is a signature of a complex life, because complex highly organized life requires high levels of oxygen. It is possible that there are other such bioindicators. For example, in the atmospheric compositions of terrestrial planets in our Solar System (including Titan), argon is one of the major constituents, moreover it was recently acknowledged to be a `biologically' active gas, exhibiting organprotective and neuroprotective properties, especially under hypoxic conditions. Here we propose that argon in the atmosphere of a rocky planet is a bioindicator of a highly organized life, provided that the planet is already deemed potentially habitable: with water, atmosphere, and of a certain age allowing for the complex life to evolve. We also delineate its possible detection methods. △ Less

Submitted 28 March, 2021; originally announced March 2021.

Comments: 1 figure, published in the Astrobiology Newsletter, Vol. 13, No. 6, Nov-Dec 2020 (Editor-in-chief: Prof. C. Sivaram)

Testing a Prototype 1U CubeSat on a Stratospheric Balloon Flight

Authors: Akaash Srikanth, Bharat Chandra, Binukumar G Nair, Nirmal K, Margarita Safonova, Shanti Prabha, Rekhesh Mohan, Jayant Murthy, Rajini G. K

Abstract: High-altitude balloon experiments are becoming very popular among universities and research institutes as they can be used for testing instruments eventually intended for space, and for simple astronomical observations of Solar System objects like the Moon, comets, and asteroids, difficult to observe from the ground due to atmosphere. Further, they are one of the best platforms for atmospheric stu… ▽ More High-altitude balloon experiments are becoming very popular among universities and research institutes as they can be used for testing instruments eventually intended for space, and for simple astronomical observations of Solar System objects like the Moon, comets, and asteroids, difficult to observe from the ground due to atmosphere. Further, they are one of the best platforms for atmospheric studies. In this experiment, we build a simple 1U CubeSat and, by flying it on a high-altitude balloon to an altitude of about 30 km, where the total payload weighted 4.9 kg and examine how some parameters, such as magnetic field, humidity, temperature or pressure, vary as a function of altitude. We also calibrate the magnetometer to remove the hard iron and soft iron errors. Such experiments and studies through a stratospheric balloon flights can also be used to study the performance of easily available commercial sensors in extreme conditions as well. We present the results of the first flight, which helped us study the functionality of the various sensors and electronics at low temperatures reaching about -40 degrees Celsius. Further the motion of the payload has been tracked throughout this flight. This experiment took place on 8 March 2020 from the CREST campus of the Indian Institute of Astrophysics, Bangalore. Using the results from this flight, we identify and rectify the errors to obtain better results from the subsequent flights. △ Less

Submitted 9 February, 2021; originally announced February 2021.

JUDE (Jayant's UVIT Data Explorer) Pipeline User Manual

Authors: P T Rahna, Jayant Murthy, Margarita Safonova

Abstract: We have written a reference manual to use JUDE (Jayant's UVIT data Explorer) data pipeline software for processing and reducing the Ultraviolet Imaging Telescope (UVIT) Level~1 data into event lists and images -- Level~2 data. The JUDE pipeline is written in the GNU Data Language (GDL) and released as an open-source which may be freely used and modified. GDL was chosen because it is an interpreted… ▽ More We have written a reference manual to use JUDE (Jayant's UVIT data Explorer) data pipeline software for processing and reducing the Ultraviolet Imaging Telescope (UVIT) Level~1 data into event lists and images -- Level~2 data. The JUDE pipeline is written in the GNU Data Language (GDL) and released as an open-source which may be freely used and modified. GDL was chosen because it is an interpreted language allowing interactive analysis of data; thus in the pipeline, each step can be checked and run interactively. This manual is intended as a guide to data reduction and calibration for the users of the UVIT data. △ Less

Submitted 28 December, 2020; v1 submitted 14 December, 2020; originally announced December 2020.

Comments: 8 pages, 2 tables, accepted for publication in The Journal of Astrophysics and Astronomy

Towards a BRICS Optical Transient Network (BRICS-OTN)

Authors: David A. H. Buckley, Vanessa A. McBride, Ulisses Barres de Almeida, Boris Shustov, Alexei Pozanenko, Alexander Lutovinov, Amitesh Omar, Jayant Murthy, Margarita Safonova, Liu Jifeng, Roberto Soria

Abstract: This paper is based on a proposal submitted for a BRICS astronomy flagship program, which was presented at the 2019 meeting of the BRICS Astronomy Working Group, held in Rio de Janeiro from 29 September to 2 October 2019. The future prospects for the detection and study of transient phenomena in the Universe heralds a new era in time domain astronomy. The case is presented for a dedicated BRICS-wi… ▽ More This paper is based on a proposal submitted for a BRICS astronomy flagship program, which was presented at the 2019 meeting of the BRICS Astronomy Working Group, held in Rio de Janeiro from 29 September to 2 October 2019. The future prospects for the detection and study of transient phenomena in the Universe heralds a new era in time domain astronomy. The case is presented for a dedicated BRICS-wide flagship program to develop a network of ground-based optical telescopes for an all-sky survey to detect short lived optical transients and to allow follow-up of multi-wavelength and multi-messenger transient objects. This will leverage existing and planned new facilities within the BRICS countries and will also draw on the opportunities presented by other multi-wavelength space- and ground-based facilities that exist within the BRICS group. The proposed optical network would initially perform followup observations on new transients using existing telescopes. This would later expand to include a new global network of $\sim$70 wide-field 1-m telescopes which will cover the entire sky, simultaneously, with a cadence of less than a few hours. This realization would represent a ground-breaking and unique global capability, presenting many scientific opportunities and associated spin-off benefits to all BRICS countries. △ Less

Submitted 5 November, 2020; originally announced November 2020.

Comments: 39 pages, 5 figures. Accepted for publication in the Journal "Annals of the Brazilian Academy of Sciences" as part of the Proceedings for the BRICS Astronomy Workshop - BAWG 2019 -, held in Rio de Janeiro, 29 Sep - 2 Oct 2019

Prospect for UV observations from the Moon. III. Assembly and ground calibration of Lunar Ultraviolet Cosmic Imager (LUCI)

Authors: Joice Mathew, B. G. Nair, Margarita Safonova, S. Sriram, Ajin Prakash, Mayuresh Sarpotdar, S. Ambily, Nirmal K., A. G. Sreejith, Jayant Murthy, P. U. Kamath, S. Kathiravan, B. R. Prasad, Noah Brosch, Norbert Kappelmann, Nirmal Suraj Gadde, Rahul Narayan

Abstract: The Lunar Ultraviolet Cosmic Imager (LUCI) is a near-ultraviolet (NUV) telescope with all-spherical mirrors, designed and built to fly as a scientific payload on a lunar mission with Team Indus - the original Indian entry to the Google Lunar X-Prize. Observations from the Moon provide a unique opportunity of a stable platform with an unobstructed view of the space at all wavelengths due to the abs… ▽ More The Lunar Ultraviolet Cosmic Imager (LUCI) is a near-ultraviolet (NUV) telescope with all-spherical mirrors, designed and built to fly as a scientific payload on a lunar mission with Team Indus - the original Indian entry to the Google Lunar X-Prize. Observations from the Moon provide a unique opportunity of a stable platform with an unobstructed view of the space at all wavelengths due to the absence of atmosphere and ionosphere. LUCI is an 80 mm aperture telescope, with a field of view of 27.6'x 20.4' and a spatial resolution of 5'', will scan the sky in the NUV (200-320 nm) domain to look for transient sources. We describe here the assembly, alignment, and calibration of the complete instrument. LUCI is now in storage in a class 1000 clean room and will be delivered to our flight partner in readiness for flight. △ Less

Submitted 1 April, 2019; v1 submitted 18 March, 2019; originally announced March 2019.

Comments: Accepted for publication in Astrophysics and Space Science. Added new references and corrected typo, in the updated version

Design and modeling of a tunable spatial heterodyne spectrometer for emission line studies

Authors: Nirmal Kaipachery, Sridharan Rengaswamy, Sripadmanaban Sriram, Jayant Murthy, Suresh Ambily, Margarita Safonova, Aickara Gopinathan Sreejith, Joice Mathew, Mayuresh Sarpotdar

Abstract: Spatial Heterodyne Spectroscopy (SHS) is a relatively novel interferometric technique similar to the Fourier transform spectroscopy with heritage from the Michelson Interferometer. An imaging detector is used at the output of a SHS to record the spatially-heterodyned interference pattern. The spectrum of the source is obtained by Fourier transforming the recorded interferogram. The merits of the S… ▽ More Spatial Heterodyne Spectroscopy (SHS) is a relatively novel interferometric technique similar to the Fourier transform spectroscopy with heritage from the Michelson Interferometer. An imaging detector is used at the output of a SHS to record the spatially-heterodyned interference pattern. The spectrum of the source is obtained by Fourier transforming the recorded interferogram. The merits of the SHS -- its design, including the absence of moving parts, compactness, high throughput, high SNR and instantaneous spectral measurements -- make it suitable for space as well as for ground observatories. The small bandwidth limitation of the SHS can be overcome by building it in tunable configuration (Tunable Spatial Heterodyne Spectrometer, TSHS). In this paper, we describe the design, development and simulation of a TSHS in refractive configuration suitable for optical wavelength regime. Here we use a beam splitter to split the incoming light compared with all--reflective SHS where a reflective grating does the beam splitting. Hence the alignment of this instrument is simple compared with all--reflective SHS where a fold mirror and a roof mirror are used to combine the beam. This instrument is intended to study faint diffuse extended celestial objects with a resolving power above 20000, and can cover a wavelength range from 350 nm to 700 nm by tuning. It is compact and rugged compared with other instruments having similar configurations. △ Less

Submitted 26 April, 2018; v1 submitted 25 April, 2018; originally announced April 2018.

Comments: 26 pages, 16 images, Accepted in Journal of Astronomical Telescopes, Instruments, and Systems

Wide-field Ultraviolet Imager for Astronomical Transient Studies

Authors: Joice Mathew, S. Ambily, Ajin Prakash, Mayuresh Sarpotdar, K. Nirmal, A. G. Sreejith, Margarita Safonova, Jayant Murthy, Noah Brosch

Abstract: Though the ultraviolet (UV) domain plays a vital role in the studies of astronomical transient events, the UV time-domain sky remains largely unexplored. We have designed a wide-field UV imager that can be flown on a range of available platforms, such as high-altitude balloons, CubeSats, and larger space missions. The major scientific goals are the variability of astronomical sources, detection of… ▽ More Though the ultraviolet (UV) domain plays a vital role in the studies of astronomical transient events, the UV time-domain sky remains largely unexplored. We have designed a wide-field UV imager that can be flown on a range of available platforms, such as high-altitude balloons, CubeSats, and larger space missions. The major scientific goals are the variability of astronomical sources, detection of transients such as supernovae, novae, tidal disruption events, and characterizing AGN variability. The instrument has an 80 mm aperture with a circular field of view of 10.8 degrees, an angular resolution of around 22 arcsec, and a 240-390 nm spectral observation window. The detector for the instrument is a Microchannel Plate (MCP)-based image intensifier with both photon counting and integration capabilities. An FPGA-based detector readout mechanism and real-time data processing have been implemented. The imager is designed in such a way that its lightweight and compact nature are well fitted for the CubeSat dimensions. Here we present various design and developmental aspects of this UV wide-field transient explorer. △ Less

Submitted 31 January, 2018; originally announced January 2018.

Comments: Accepted for publication in Experimental Astronomy

Theoretical Validation of Potential Habitability via Analytical and Boosted Tree Methods: An Optimistic Study on Recently Discovered Exoplanets

Authors: Snehanshu Saha, Suryoday Basak, Kakoli Bora, Margarita Safonova, Surbhi Agrawal, Poulami Sarkar, Jayant Murthy

Abstract: Seven Earth-sized planets, TRAPPIST-1 system, were discovered in February 2017. Three of these planets are in the habitable zone (HZ) of their star, making them potentially habitable planets a mere 40 light years away. Discovery of the closest potentially habitable planet to us just a year before -- Proxima~b, and a realization that Earth-type planets in HZ are a common occurrence provides the imp… ▽ More Seven Earth-sized planets, TRAPPIST-1 system, were discovered in February 2017. Three of these planets are in the habitable zone (HZ) of their star, making them potentially habitable planets a mere 40 light years away. Discovery of the closest potentially habitable planet to us just a year before -- Proxima~b, and a realization that Earth-type planets in HZ are a common occurrence provides the impetus to the pursuit for life outside the Solar System. The search for life has two goals: Earth similarity and habitability. An index was recently proposed, Cobb-Douglas Habitability Score (CDHS), based on Cobb-Douglas production function, which computes the habitability score by using measured and estimated planetary parameters like radius, density, escape velocity and surface temperature of a planet. The proposed metric with exponents accounting for metric elasticity, is endowed with analytical properties that ensure global optima and can be scaled to accommodate a finite number of input parameters. We show that the model is elastic, and the conditions on elasticity to ensure global maxima can scale as the number of predictor parameters increase. K-Nearest Neighbour classification algorithm, embellished with probabilistic herding and thresholding restriction, utilizes CDHS scores and labels exoplanets to appropriate classes via feature-learning methods. The algorithm works on top of a decision-theoretical model using the power of convex optimization and machine learning. A second approach, based on a novel feature-learning and tree-building method classifies the same planets without computing the CDHS of the planets and produces a similar outcome. The convergence of the two different approaches indicates the strength of the proposed scheme and the likelihood of the potential habitability of the recent discoveries. △ Less

Submitted 4 December, 2017; originally announced December 2017.

Comments: 17 pages, 2 figures, details in the attached Supplementary File

Investigating the In-Flight Performance of the UVIT Payload on ASTROSAT

Authors: P. T. Rahna, Jayant Murthy, M. Safonova, F. Sutaria, S. B. Gudennavar, S. G. Bubbly

Abstract: We have studied the performance of the Ultraviolet Imaging Telescope payload on AstroSat and derived a calibration of the FUV and NUV instruments on board. We find that the sensitivity of both the FUV and NUV channels is as expected from ground calibrations, with the FUV effective area about 35% and the NUV effective area about the same as that of GALEX. The point spread function of the instrument… ▽ More We have studied the performance of the Ultraviolet Imaging Telescope payload on AstroSat and derived a calibration of the FUV and NUV instruments on board. We find that the sensitivity of both the FUV and NUV channels is as expected from ground calibrations, with the FUV effective area about 35% and the NUV effective area about the same as that of GALEX. The point spread function of the instrument is on the order of 1.2-1.6 arcsec. We have found that pixel-to-pixel variations in the sensitivity are less than 10% with spacecraft motion compensating for most of the flat-field variations. We derived a distortion correction but recommend that it be applied post-processing as part of an astrometric solution. △ Less

Submitted 1 May, 2018; v1 submitted 8 June, 2017; originally announced June 2017.

Comments: Published in MNRAS, 8 pages, 11 figures

Journal ref: MNRAS,2017,471(3),3028-3035

Near UV Imager with an MCP Based Photon Counting Detector

Authors: S. Ambily, Joice Mathew, Mayuresh Sarpotdar, A. G. Sreejith, K. Nirmal, Ajin Prakash, Margarita Safonova, Jayant Murthy

Abstract: We are developing a compact UV Imager using light weight components, that can be flown on a small CubeSat or a balloon platform. The system has a lens-based optics that can provide an aberration-free image over a wide field of view. The backend instrument is a photon counting detector with off-the-shelf MCP, CMOS sensor and electronics. We are using a Z-stack MCP with a compact high voltage power… ▽ More We are developing a compact UV Imager using light weight components, that can be flown on a small CubeSat or a balloon platform. The system has a lens-based optics that can provide an aberration-free image over a wide field of view. The backend instrument is a photon counting detector with off-the-shelf MCP, CMOS sensor and electronics. We are using a Z-stack MCP with a compact high voltage power supply and a phosphor screen anode, which is read out by a CMOS sensor and the associated electronics. The instrument can be used to observe solar system objects and detect bright transients from the upper atmosphere with the help of CubeSats or high altitude balloons. We have designed the imager to be capable of working in direct frame transfer mode as well in the photon-counting mode for single photon event detection. The identification and centroiding of each photon event are done using an FPGA-based data acquisition and real-time processing system. △ Less

Submitted 3 March, 2017; originally announced March 2017.

Comments: 8 pages, 4 figures, presented at Space Telescopes and Instrumentation 2016: Ultraviolet to Gamma Ray conference, July 18, 2016 at Edinburgh, UK

Journal ref: Proc. SPIE 9905, Space Telescopes and Instrumentation 2016: Ultraviolet to Gamma Ray, 990539

Development of Data Acquisition Methods for an FPGA-Based Photon Counting Detector

Authors: S. Ambily, Mayuresh Sarpotdar, Joice Mathew, A. G. Sreejith, K. Nirmal, Ajin Prakash, Margarita Safonova, Jayant Murthy

Abstract: MCP-based detectors are widely used in the ultraviolet (UV) region due to their low noise levels, high sensitivity and good spatial and temporal resolution. We have developed a compact near-UV (NUV) detector for high-altitude balloon and space flights, using off-the-shelf MCP, CMOS sensor, and optics. The detector is designed to be capable of working in the direct frame transfer mode as well in th… ▽ More MCP-based detectors are widely used in the ultraviolet (UV) region due to their low noise levels, high sensitivity and good spatial and temporal resolution. We have developed a compact near-UV (NUV) detector for high-altitude balloon and space flights, using off-the-shelf MCP, CMOS sensor, and optics. The detector is designed to be capable of working in the direct frame transfer mode as well in the photon-counting mode for single photon event detection. The identification and centroiding of each photon event are done using an FPGA-based data acquisition and real-time processing system. In this paper, we discuss various algorithms and methods used in both operating modes, as well as their implementation on the hardware. △ Less

Submitted 24 January, 2017; originally announced January 2017.

Journal ref: J. Astron. Instrum. 0, 1750002 (2017) [11 pages]

Prospect for UV observations from the Moon. II. Instrumental Design of an Ultraviolet Imager LUCI

Authors: Joice Mathew, Ajin Prakash, Mayuresh Sarpotdar, A. G. Sreejith, K. Nirmal, S. Ambily, Margarita Safonova, Jayant Murthy, Noah Brosch

Abstract: We present a design for a near-ultraviolet (NUV) imaging instrument which may be flown on a range of available platforms, including high-altitude balloons, nanosatellites, or space missions. Although all current UV space missions adopt a Ritchey-Chretain telescope design, this requires aspheric optics, making the optical system complex, expensive and challenging for manufacturing and alignment. An… ▽ More We present a design for a near-ultraviolet (NUV) imaging instrument which may be flown on a range of available platforms, including high-altitude balloons, nanosatellites, or space missions. Although all current UV space missions adopt a Ritchey-Chretain telescope design, this requires aspheric optics, making the optical system complex, expensive and challenging for manufacturing and alignment. An all-spherical configuration is a cost-effective and simple solution. We have aimed for a small payload which may be launched by different platforms and we have designed a compact, light-weight payload which will withstand all launch loads. No other UV payloads have been previously reported with an all-spherical optical design for imaging in the NUV domain and a weight below 2 kg. Our main science goal is focussed on bright UV sources not accessible by the more sensitive large space UV missions. Here we discuss various aspects of design and development of the complete instrument, the structural and finite-element analysis of the system performed to ensure that the payload withstands launch-load stresses and vibrations. We expect to fly this telescope -- Lunar Ultraviolet Cosmic Imager (LUCI) -- on a spacecraft to the Moon as part of the Indian entry into Google X-Prize competition. Observations from the Moon provide a unique opportunity to observe the sky from a stable platform far above the Earth's atmosphere. However, we will explore other opportunities as well, and will fly this telescope on a high-altitude balloon later this year. △ Less

Submitted 5 January, 2017; v1 submitted 7 October, 2016; originally announced October 2016.

Pointing System for the Balloon-Borne Astronomical Payloads

Authors: K. Nirmal, A. G. Sreejith, Joice Mathew, Mayuresh Sarpotdar, Ambily Suresh, Ajin Prakash, Margarita Safonova, Jayant Murthy

Abstract: We describe the development and implementation of a light-weight, fully autonomous 2-axis pointing and stabilization system designed for balloon-borne astronomical payloads. The system is developed using off-the-shelf components such as Arduino Uno controller, HMC 5883L magnetometer, MPU-9150 Inertial Measurement Unit (IMU) and iWave GPS receiver unit. It is a compact and rugged system which can a… ▽ More We describe the development and implementation of a light-weight, fully autonomous 2-axis pointing and stabilization system designed for balloon-borne astronomical payloads. The system is developed using off-the-shelf components such as Arduino Uno controller, HMC 5883L magnetometer, MPU-9150 Inertial Measurement Unit (IMU) and iWave GPS receiver unit. It is a compact and rugged system which can also be used to take images/video in a moving vehicle, or in areal photography. The system performance is evaluated from the ground, as well as in conditions simulated to imitate the actual flight by using a tethered launch. △ Less

Submitted 16 December, 2016; v1 submitted 1 September, 2016; originally announced September 2016.

Comments: 25 pages, 12 figures, Accepted in Journal of Astronomical Telescopes, Instruments, and Systems

A software package for evaluating the performance of a star sensor operation

Authors: Mayuresh Sarpotdar, Joice Mathew, A. G. Sreejith, K. Nirmal, S. Ambily, Ajin Prakash, Margarita Safonova, Jayant Murthy

Abstract: We have developed a low-cost off-the-shelf component star sensor (StarSense) for use in minisatellites and CubeSats to determine the attitude of a satellite in orbit. StarSense is an imaging camera with a limiting magnitude of 6.5, which extracts information from star patterns it records in the images. The star sensor implements a centroiding algorithm to find centroids of the stars in the image,… ▽ More We have developed a low-cost off-the-shelf component star sensor (StarSense) for use in minisatellites and CubeSats to determine the attitude of a satellite in orbit. StarSense is an imaging camera with a limiting magnitude of 6.5, which extracts information from star patterns it records in the images. The star sensor implements a centroiding algorithm to find centroids of the stars in the image, a Geometric Voting algorithm for star pattern identification, and a QUEST algorithm for attitude quaternion calculation. Here, we describe the software package to evaluate the performance of these algorithms as a star sensor single operating system. We simulate the ideal case where sky background and instrument errors are omitted, and a more realistic case where noise and camera parameters are added to the simulated images. We evaluate such performance parameters of the algorithms as attitude accuracy, calculation time, required memory, star catalog size, sky coverage, etc., and estimate the errors introduced by each algorithm. This software package is written for use in MATLAB. The testing is parametrized for different hardware parameters, such as the focal length of the imaging setup, the field of view (FOV) of the camera, angle measurement accuracy, distortion effects, etc., and therefore, can be applied to evaluate the performance of such algorithms in any star sensor. For its hardware implementation on our StarSense, we are currently porting the codes in form of functions written in C. This is done keeping in view its easy implementation on any star sensor electronics hardware. △ Less

Submitted 27 December, 2016; v1 submitted 27 August, 2016; originally announced August 2016.

Comments: 11 pages, 8 figures, 9 tables

A generic FPGA-based detector readout and real-time image processing board

Authors: Mayuresh Sarpotdar, Joice Mathew, Margarita Safonova, Jayant Murthy

Abstract: For space-based astronomical observations, it is important to have a mechanism to capture the digital output from the standard detector for further on-board analysis and storage. We have developed a generic (application- wise) field-programmable gate array (FPGA) board to interface with an image sensor, a method to generate the clocks required to read the image data from the sensor, and a real-tim… ▽ More For space-based astronomical observations, it is important to have a mechanism to capture the digital output from the standard detector for further on-board analysis and storage. We have developed a generic (application- wise) field-programmable gate array (FPGA) board to interface with an image sensor, a method to generate the clocks required to read the image data from the sensor, and a real-time image processor system (on-chip) which can be used for various image processing tasks. The FPGA board is applied as the image processor board in the Lunar Ultraviolet Cosmic Imager (LUCI) and a star sensor (StarSense) (instruments developed by our group). In this paper, we discuss the various design considerations for this board and its applications in the future balloon and possible space flights. △ Less

Submitted 26 August, 2016; originally announced August 2016.

Comments: 10 pages, 11 figures, SPIE conference, Astronomical Telescopes + Instrumentation, Edinburgh, 2016

Journal ref: Proc. SPIE 9915, High Energy, Optical, and Infrared Detectors for Astronomy VII, 99152K (July 27, 2016)

Noise modeling and analysis of an IMU-based attitude sensor: improvement of performance by filtering and sensor fusion

Authors: K. Nirmal, A. G. Sreejith, Joice Mathew, Mayuresh Sarpotdar, Ambily Suresh, Ajin Prakash, Margarita Safonova, Jayant Murthy

Abstract: We describe the characterization and removal of noise present in the Inertial Measurement Unit (IMU) MPU-6050. This IMU was initially used in an attitude sensor (AS) developed in-house, and subsequently implemented in a pointing and stabilization platform developed for small balloon-borne astronomical payloads. We found that the performance of the IMU degrades with time due to the accumulation of… ▽ More We describe the characterization and removal of noise present in the Inertial Measurement Unit (IMU) MPU-6050. This IMU was initially used in an attitude sensor (AS) developed in-house, and subsequently implemented in a pointing and stabilization platform developed for small balloon-borne astronomical payloads. We found that the performance of the IMU degrades with time due to the accumulation of different errors. Using the Allan variance analysis method, we identified the different components of noise present in the IMU and verified the results using a power spectral density analysis (PSD). We tried to remove the high-frequency noise using smoothing filters, such as moving average filter and Savitzky-Golay filter. Although we did manage to filter some of the high-frequency noise, the performance of these filters was not satisfactory for our application. We found the distribution of the random noise present in the IMU using a probability density analysis, and identified the noise to be white Gaussian in nature which we successfully removed by a Kalman filter in real time. △ Less

Submitted 25 August, 2016; originally announced August 2016.

Comments: 10 pages, 9 figures, presented at SPIE Astronomical Telescopes + Instrumentation Symposium, 26 June-1 July 2016, Edinburgh, United Kingdom

Journal ref: Proc. SPIE. 9912, Advances in Optical and Mechanical Technologies for Telescopes and Instrumentation II, 99126W, July 22, 2016

Similarity indexing of exoplanets in search for potential habitability: application to Mars-like worlds

Authors: Madhu Kashyap Jagadeesh, S. B. Gudennavar, Urmi Doshi, M. Safonova

Abstract: Study of exoplanets is one of the main goals of present research in planetary sciences and astrobiology. Analysis of huge planetary data from space missions such as CoRoT and Kepler is directed ultimately at finding a planet similar to Earth -- the Earth's twin, and answering the question of potential exo-habitability. The Earth Similarity Index (ESI) is a first step in this quest, ranging from… ▽ More Study of exoplanets is one of the main goals of present research in planetary sciences and astrobiology. Analysis of huge planetary data from space missions such as CoRoT and Kepler is directed ultimately at finding a planet similar to Earth -- the Earth's twin, and answering the question of potential exo-habitability. The Earth Similarity Index (ESI) is a first step in this quest, ranging from 1 (Earth) to 0 (totally dissimilar to Earth). It was defined for the four physical parameters of a planet: radius, density, escape velocity and surface temperature. The ESI is further sub-divided into interior ESI (geometrical mean of radius and density) and surface ESI (geometrical mean of escape velocity and surface temperature). The challenge here is to determine which exoplanet parameter(s) is important in finding this similarity; how exactly the individual parameters entering the interior ESI and surface ESI are contributing to the global ESI. Since the surface temperature entering surface ESI is a non-observable quantity, it is difficult to determine its value. Using the known data for the Solar System objects, we established the calibration relation between surface and equilibrium temperatures to devise an effective way to estimate the value of the surface temperature of exoplanets for further analysis with our graphic methodology. A new approach, called Mars Similarity Index (MSI), is introduced to identify planets that may be habitable to the extreme forms of life. MSI is defined in the range between 1 (present Mars) and 0 (dissimilar to present Mars) and uses the same physical parameters as ESI. We are interested in Mars-like planets to search for planets that may host the extreme life forms, such as the ones living in extreme environments on Earth; for example, methane on Mars may be a product of the methane-specific extremophile life form metabolism. △ Less

Submitted 6 June, 2018; v1 submitted 24 August, 2016; originally announced August 2016.

Comments: 14 pages

Journal ref: Astrophysics and Space Science 2017

An Ultraviolet imager to study bright UV sources

Authors: Joice Mathew, Ajin Prakash, Mayuresh Sarpotdar, A. G. Sreejith, Margarita Safonova, Jayant Murthy

Abstract: We have designed and developed a compact ultraviolet imaging payload to fly on a range of possible platforms such as high altitude balloon experiments, cubesats, space missions, etc. The primary science goals are to study the bright UV sources (mag < 10) and also to look for transients in the Near UV (200 - 300 nm) domain. Our first choice is to place this instrument on a spacecraft going to the M… ▽ More We have designed and developed a compact ultraviolet imaging payload to fly on a range of possible platforms such as high altitude balloon experiments, cubesats, space missions, etc. The primary science goals are to study the bright UV sources (mag < 10) and also to look for transients in the Near UV (200 - 300 nm) domain. Our first choice is to place this instrument on a spacecraft going to the Moon as part of the Indian entry into Google lunar X-Prize competition. The major constraints for the instrument are, it should be lightweight (< 2Kg), compact (length < 50cm) and cost effective. The instrument is an 80 mm diameter Cassegrain telescope with a field of view of around half a degree designated for UV imaging. In this paper we will discuss about the various science cases that can be performed by having observations with the instrument on different platforms. We will also describe the design, development and the current state of implementation of the instrument. This includes opto-mechanical and electrical design of the instrument. We have adopted an all spherical optical design which would make the system less complex to realize and a cost effective solution compared to other telescope configuration. The structural design has been chosen in such a way that it will ensure that the instrument could withstand all the launch load vibrations. An FPGA based electronics board is used for the data acquisition, processing and CCD control. We will also briefly discuss about the hardware implementation of the detector interface and algorithms for the detector readout and data processing. △ Less

Submitted 23 August, 2016; originally announced August 2016.

Comments: 7 pages, 4 figures, presented at Space Telescopes and Instrumentation 2016: Ultraviolet to Gamma Ray conference, July 18, 2016 at Edinburgh, UK

Journal ref: Proc. SPIE 9905, Space Telescopes and Instrumentation 2016: Ultraviolet to Gamma Ray, 990532

Balloon UV Experiments for Astronomical and Atmospheric Observations

Authors: A. G. Sreejith, Joice Mathew, Mayuresh Sarpotdar, K. Nirmal, S. Ambily, Ajin Prakash, Margarita Safonova, Jayant Murthy

Abstract: The ultraviolet (UV) window has been largely unexplored through balloons for astronomy. We discuss here the development of a compact near-UV spectrograph with fiber optics input for balloon ights. It is a modified Czerny-Turner system built using off-the-shelf components. The system is portable and scalable to different telescopes. The use of re ecting optics reduces the transmission loss in the U… ▽ More The ultraviolet (UV) window has been largely unexplored through balloons for astronomy. We discuss here the development of a compact near-UV spectrograph with fiber optics input for balloon ights. It is a modified Czerny-Turner system built using off-the-shelf components. The system is portable and scalable to different telescopes. The use of re ecting optics reduces the transmission loss in the UV. It employs an image-intensified CMOS sensor, operating in photon counting mode, as the detector of choice. A lightweight pointing system developed for stable pointing to observe astronomical sources is also discussed, together with the methods to improve its accuracy, e.g. using the in-house build star sensor and others. Our primary scientific objectives include the observation of bright Solar System objects such as visible to eye comets, Moon and planets. Studies of planets can give us valuable information about the planetary aurorae, helping to model and compare atmospheres of other planets and the Earth. The other major objective is to look at the diffuse UV atmospheric emission features (airglow lines), and at column densities of trace gases. This UV window includes several lines important to atmospheric chemistry, e.g. SO2, O3, HCHO, BrO. The spectrograph enables simultaneous measurement of various trace gases, as well as provides better accuracy at higher altitudes compared to electromechanical trace gas measurement sondes. These lines contaminate most astronomical observations but are poorly characterized. Other objectives may include sprites in the atmosphere and meteor ashes from high altitude burn-outs. Our recent experiments and observations with high-altitude balloons are discussed. △ Less

Submitted 23 August, 2016; originally announced August 2016.

Journal ref: Proc. SPIE 9908, Ground-based and Airborne Instrumentation for Astronomy VI, 99084E (August 9, 2016)

Measurements of gondola motion on a stratospheric balloon flight

Authors: Margarita Safonova, K. Nirmal, A. G. Sreejith, Mayuresh Sarpotdar, S. Ambily, Ajin Prakash, Joice Mathew, Jayant Murthy, Devarajan Anand, B. V. N. Kapardhi, B. Suneel Kumar, P. M. Kulkarni

Abstract: Balloon experiments are an economically feasible method of conducting observations in astronomy that are not possible from the ground. The astronomical payload may include a telescope, a detector, and a pointing/stabilization system. Determining the attitude of the payload is of primary importance in such applications, to accurately point the detector/telescope to the desired direction. This is es… ▽ More Balloon experiments are an economically feasible method of conducting observations in astronomy that are not possible from the ground. The astronomical payload may include a telescope, a detector, and a pointing/stabilization system. Determining the attitude of the payload is of primary importance in such applications, to accurately point the detector/telescope to the desired direction. This is especially important in generally unstable lightweight balloon flights. However, the conditions at float altitudes, which can be reached by zero pressure balloons, could be more stable, enabling accurate pointings. We have used the Inertial Measurement Unit (IMU), placed on a stratospheric zero pressure balloon, to observe 3-axis motion of a balloon payload over a fight time of 4.5 hours, from launch to the float altitude of 31.2 km. The balloon was launched under nominal atmospheric conditions on May 8th 2016, from a Tata Institute of Fundamental Research Balloon Facility, Hyderabad. △ Less

Submitted 21 July, 2016; originally announced July 2016.

Comments: 9 pages, 11 figures, available at URL: http://hdl.handle.net/2248/6993, IIA Technical Report Series No. 16, pp. 1-9, 2016

Report number: IIA-TRS-1616

JUDE: An Ultraviolet Imaging Telescope Pipeline

Authors: Jayant Murthy, P. T. Rahna, Firoza Sutaria, Margarita Safonova, S. B. Gudennavar, S. G. Bubbly

Abstract: The Ultraviolet Imaging Telescope (UVIT) was launched as part of the multi-wavelength Indian ASTROSAT mission on 28 September, 2015 into a low Earth orbit. A 6-month performance verification (PV) phase ended in March 2016, and the instrument is now in the general observing phase. UVIT operates in three channels: visible, near-ultraviolet (NUV) and far-ultraviolet (FUV), each with a choice of broad… ▽ More The Ultraviolet Imaging Telescope (UVIT) was launched as part of the multi-wavelength Indian ASTROSAT mission on 28 September, 2015 into a low Earth orbit. A 6-month performance verification (PV) phase ended in March 2016, and the instrument is now in the general observing phase. UVIT operates in three channels: visible, near-ultraviolet (NUV) and far-ultraviolet (FUV), each with a choice of broad and narrow band filters, and has NUV and FUV gratings for low-resolution spectroscopy. We have written a software package (JUDE) to convert the Level1 data from UVIT into scientifically useful photon lists and images. The routines are written in the GNU Data Language (GDL) and are compatible with the IDL software package. We use these programs in our own scientific work, and will continue to update the programs as we gain better understanding of the UVIT instrument and its performance. We have released JUDE under an Apache License. △ Less

Submitted 13 June, 2017; v1 submitted 7 July, 2016; originally announced July 2016.

Comments: 12 pages, 5 figures, 5 tables,5 appendices submitted to Astronomy and Computing

CD-HPF: New Habitability Score Via Data Analytic Modeling

Authors: Kakoli Bora, Snehanshu Saha, Surbhi Agrawal, Margarita Safonova, Swati Routh, Anand Narasimhamurthy

Abstract: The search for life on the planets outside the Solar System can be broadly classified into the following: looking for Earth-like conditions or the planets similar to the Earth (Earth similarity), and looking for the possibility of life in a form known or unknown to us (habitability). The two frequently used indices, ESI and PHI, describe heuristic methods to score similarity/habitability in the ef… ▽ More The search for life on the planets outside the Solar System can be broadly classified into the following: looking for Earth-like conditions or the planets similar to the Earth (Earth similarity), and looking for the possibility of life in a form known or unknown to us (habitability). The two frequently used indices, ESI and PHI, describe heuristic methods to score similarity/habitability in the efforts to categorize different exoplanets or exomoons. ESI, in particular, considers Earth as the reference frame for habitability and is a quick screening tool to categorize and measure physical similarity of any planetary body with the Earth. The PHI assesses the probability that life in some form may exist on any given world, and is based on the essential requirements of known life: a stable and protected substrate, energy, appropriate chemistry and a liquid medium. We propose here a different metric, a Cobb-Douglas Habitability Score (CDHS), based on Cobb-Douglas habitability production function (CD-HPF), which computes the habitability score by using measured and calculated planetary input parameters. The proposed metric, with exponents accounting for metric elasticity, is endowed with verifiable analytical properties that ensure global optima, and is scalable to accommodate finitely many input parameters. The model is elastic, does not suffer from curvature violations and, as we discovered, the standard PHI is a special case of CDHS. Computed CDHS scores are fed to K-NN (K-Nearest Neighbour) classification algorithm with probabilistic herding that facilitates the assignment of exoplanets to appropriate classes via supervised feature learning methods, producing granular clusters of habitability. The proposed work describes a decision-theoretical model using the power of convex optimization and algorithmic machine learning. △ Less

Submitted 6 April, 2016; originally announced April 2016.

Comments: 8 figures, supporting website, which hosts all relevant data and results: sets, figures, animation video and a graphical abstract, is available at https://habitabilitypes.wordpress.com/

An Overview of High-Altitude Balloon Experiments at the Indian Institute of Astrophysics

Authors: Margarita Safonova, Akshata Nayak, A. G. Sreejith, Joice Mathew, Mayuresh Sarpotdar, S. Ambily, K. Nirmal, Sameer Talnikar, Shripathy Hadigal, Ajin Prakash, Jayant Murthy

Abstract: We have initiated the High-Altitude Ballooning programme at Indian Institute of Astrophysics, Bangalore, in the year 2011 with the primary purpose of developing and flying low-cost scientific payloads on a balloon-borne platform. The main aim is the observations of extended nearby objects (e.g. comets) and of diffuse sources (e.g. zodiacal light or airglow) with wide field of view (FOV) UV instrum… ▽ More We have initiated the High-Altitude Ballooning programme at Indian Institute of Astrophysics, Bangalore, in the year 2011 with the primary purpose of developing and flying low-cost scientific payloads on a balloon-borne platform. The main aim is the observations of extended nearby objects (e.g. comets) and of diffuse sources (e.g. zodiacal light or airglow) with wide field of view (FOV) UV instruments from near space (20 to 30 km). A brief summary and the results of the tethered flights carried out at IIA CREST campus are given in Ref.~1. Here we present an overview of the nine free-flying balloon experiments conducted from March 2013 to November 2014. We describe the launch procedures, payloads, methods of tracking and recovery. Since we fall in the light balloon category --- payload weight is limited to less than 6 kg --- we use the 3-D printer to fabricate lightweight boxes and structures for our experiments. We discuss the flight and scientific data obtained from different launches and the development of the in-house lightweight sensors and controllers, as well as a fully-fledged 2-axis pointing and stabilization system, for the flights. △ Less

Submitted 3 September, 2015; v1 submitted 4 June, 2015; originally announced June 2015.

Comments: 21 pages, 33 Figures

Journal ref: Astronomical and Astrophysical Transactions (AApTr), vol. 29, Issue 3, pages 397 - 426, 2016

SN 2013ej - A type IIL supernova with weak signs of interaction

Authors: Subhash Bose, Firoza Sutaria, Brijesh Kumar, Chetna Duggal, Kuntal Misra, Peter J. Brown, Mridweeka Singh, Vikram Dwarkadas, Donald G. York, Sayan Chakraborti, H. C. Chandola, Julie Dahlstrom, Alak Ray, Margarita Safonova

Abstract: We present optical photometric and spectroscopic observations of supernova 2013ej. It is one of the brightest type II supernovae exploded in a nearby ($\sim 10$ Mpc) galaxy NGC 628. The light curve characteristics are similar to type II SNe, but with a relatively shorter ($ \sim85 $ day) and steeper ($ \sim1.7 $ mag (100 d)$^{-1} $ in V) plateau phase. The SN shows a large drop of 2.4 mag in V ban… ▽ More We present optical photometric and spectroscopic observations of supernova 2013ej. It is one of the brightest type II supernovae exploded in a nearby ($\sim 10$ Mpc) galaxy NGC 628. The light curve characteristics are similar to type II SNe, but with a relatively shorter ($ \sim85 $ day) and steeper ($ \sim1.7 $ mag (100 d)$^{-1} $ in V) plateau phase. The SN shows a large drop of 2.4 mag in V band brightness during plateau to nebular transition. The absolute ultraviolet (UV) light curves are identical to SN 2012aw, showing a similar UV plateau trend extending up to 85 days. The radioactive $^{56}$Ni mass estimated from the tail luminosity is $ 0.02 $M$_{\odot}$ which is significantly lower than typical type IIP SNe. The characteristics of spectral features and evolution of line velocities indicate that SN 2013ej is a type II event. However, light curve characteristics and some spectroscopic features provide strong support in classifying it as a type IIL event. A detailed SYNOW modelling of spectra indicates the presence of some high velocity components in H$α$ and H$β$ profiles, implying possible ejecta-CSM interaction. The nebular phase spectrum shows an unusual notch in the H$α$ emission which may indicate bipolar distribution of $^{56}$Ni. Modelling of the bolometric light curve yields a progenitor mass of $ \sim14 $M$_{\odot}$ and a radius of $ \sim450 $R$_{\odot}$, with a total explosion energy of $ \sim2.3\times10^{51} $ erg. △ Less

Submitted 25 April, 2015; v1 submitted 23 April, 2015; originally announced April 2015.

Comments: 19 pages, 19 figures, 6 tables. Accepted for publication in ApJ

A Raspberry Pi-Based Attitude Sensor

Authors: A. G. Sreejith, Joice Mathew, Mayuresh Sarpotdar, Rekhesh Mohan, Akshata Nayak, Margarita Safonova, Jayant Murthy

Abstract: We have developed a lightweight low-cost attitude sensor, based on a Raspberry Pi, built with readily available commercial components. It can be used in experiments where weight and power are constrained, such as in high- altitude lightweight balloon flights. This attitude sensor will be used as a major building block in a closed-loop control system with driver motors to stabilize and point camera… ▽ More We have developed a lightweight low-cost attitude sensor, based on a Raspberry Pi, built with readily available commercial components. It can be used in experiments where weight and power are constrained, such as in high- altitude lightweight balloon flights. This attitude sensor will be used as a major building block in a closed-loop control system with driver motors to stabilize and point cameras and telescopes for astronomical observations from a balloon-borne payload. △ Less

Submitted 19 December, 2014; originally announced December 2014.

Comments: Journal of Astronomical Instrumentation, Volume 03, Issue 02, November 2014

Journal ref: A. G. Sreejith et al, J. Astron. Instrum. 03, 1440006 (2014) [10 pages]

Prospect for UV observations from the Moon

Authors: Margarita Safonova, Joice Mathew, Rekhesh Mohan, A. G. Sreejith, Jayant Murthy, Noah Brosch, Norbert Kappelmann, Arpit Sharma, Rahul Narayan

Abstract: Space astronomy in the last 40 years has largely been done from spacecraft in low Earth orbit (LEO) for which the technology is proven and delivery mechanisms are readily available. However, new opportunities are arising with the surge in commercial aerospace missions. We describe here one such possibility: deploying a small instrument on the Moon. This can be accomplished by flying onboard the In… ▽ More Space astronomy in the last 40 years has largely been done from spacecraft in low Earth orbit (LEO) for which the technology is proven and delivery mechanisms are readily available. However, new opportunities are arising with the surge in commercial aerospace missions. We describe here one such possibility: deploying a small instrument on the Moon. This can be accomplished by flying onboard the Indian entry to the Google Lunar X PRIZE competition, Team Indus mission, which is expected to deliver a nearly 30 kgs of payloads to the Moon, with a rover as its primary payload. We propose to mount a wide-field far-UV (130--180 nm) imaging telescope as a payload on the Team Indus lander. Our baseline operation is a fixed zenith pointing but with the option of a mechanism to allow observations of different attitudes. Pointing towards intermediate ecliptic latitude (50 deg or above) ensures that the Sun is at least 40 deg off the line of sight at all times. In this position, the telescope can cover higher galactic latitudes as well as parts of Galactic plane. The scientific objectives of such a prospective are delineated and discussed. △ Less

Submitted 13 October, 2014; originally announced October 2014.

Comments: 28 pages, 8 figures

Journal ref: Astrophysics and Space Science, Volume 353, Issue 2, pp.329-346 (2014)

Age Aspects of Habitability

Authors: M. Safonova, J. Murthy, Yu. A. Shchekinov

Abstract: A habitable zone of a star is defined as a range of orbits within which a rocky planet can support liquid water on its surface. The most intriguing question driving the search for habitable planets is whether they host life. But is the age of the planet important for its habitability? If we define habitability as the ability of a planet to beget life, then probably not. After all, life on Earth ha… ▽ More A habitable zone of a star is defined as a range of orbits within which a rocky planet can support liquid water on its surface. The most intriguing question driving the search for habitable planets is whether they host life. But is the age of the planet important for its habitability? If we define habitability as the ability of a planet to beget life, then probably not. After all, life on Earth has developed within only about 800 Myr after its formation. If, however, we define habitability as our ability to detect life on the surface of exoplanets, then age becomes a crucial parameter. Only after life had evolved sufficiently complex to change its environment on a planetary scale, can we detect it remotely through its imprint on the atmosphere - the biosignatures, out of which the photosynthetic oxygen is the most prominent indicator of developed life as we know it. But the onset of photosynthesis on planets in habitable zones may take much longer time than the planetary age. The knowledge of the age of a planet is necessary for developing a strategy to search for exoplanets carrying complex (developed) life - many confirmed potentially habitable planets are too young (orbiting Population I stars) and may not have had enough time to develop and/or sustain detectable life. In the last decade, many planets orbiting old (9-13 Gyr) metal-poor Population II stars have been discovered. Such planets had had enough time to develop necessary chains of chemical reactions and may carry detectable life if located in a habitable zone. These old planets should be primary targets in search for the extraterrestrial life. △ Less

Submitted 23 March, 2016; v1 submitted 2 April, 2014; originally announced April 2014.

Comments: 13 pages, 1 figure, 3 tables with data on host ages for confirmed PHPs, and on all planets with estimated ages >= 9 Gyr

Journal ref: International Journal of Astrobiology, 2016, 15(2), pp. 93-105

M31 Pixel Lensing PLAN Campaign: MACHO Lensing and Self Lensing Signals

Authors: S. Calchi Novati, V. Bozza, I. Bruni, M. Dall'Ora, F. De Paolis, M. Dominik, R. Gualandi, G. Ingrosso, Ph. Jetzer, L. Mancini, A. Nucita, M. Safonova, G. Scarpetta, M. Sereno, F. Strafella, A. Subramaniam, A. Gould

Abstract: We present the final analysis of the observational campaign carried out by the PLAN (Pixel Lensing Andromeda) collaboration to detect a dark matter signal in form of MACHOs through the microlensing effect. The campaign consists of about 1 month/year observations carried out during 4 years (2007-2010) at the 1.5m Cassini telescope in Loiano ("Astronomical Observatory of BOLOGNA", OAB) plus 10 days… ▽ More We present the final analysis of the observational campaign carried out by the PLAN (Pixel Lensing Andromeda) collaboration to detect a dark matter signal in form of MACHOs through the microlensing effect. The campaign consists of about 1 month/year observations carried out during 4 years (2007-2010) at the 1.5m Cassini telescope in Loiano ("Astronomical Observatory of BOLOGNA", OAB) plus 10 days of data taken in 2010 at the 2m Himalayan Chandra Telescope (HCT) monitoring the central part of M31 (two fields of about 13'x12.6'). We establish a fully automated pipeline for the search and the characterization of microlensing flux variations: as a result we detect 3 microlensing candidates. We evaluate the expected signal through a full Monte Carlo simulation of the experiment completed by an analysis of the detection efficiency of our pipeline. We consider both "self lensing" and "MACHO lensing" lens populations, given by M31 stars and dark matter halo MACHOs, in the M31 and the Milky Way (MW), respectively. The total number of events is compatible with the expected self-lensing rate. Specifically, we evaluate an expected signal of about 2 self-lensing events. As for MACHO lensing, for full 0.5 (0.01) solar mass MACHO halos, our prediction is for about 4 (7) events. The comparatively small number of expected MACHO versus self lensing events, together with the small number statistics at disposal, do not enable us to put strong constraints on that population. Rather, the hypothesis, suggested by a previous analysis, on the MACHO nature of OAB-07-N2, one of the microlensing candidates, translates into a sizeable lower limit for the halo mass fraction in form of the would be MACHO population, f, of about 15% for 0.5 solar mass MACHOs. △ Less

Submitted 13 January, 2014; originally announced January 2014.

Comments: ApJ accepted, 13 pages, 5 figures, 2 tables

Journal ref: ApJ, 783, 86 (2014)

High-Altitude Ballooning Program at the Indian Institute of Astrophysics

Authors: A. Nayak, A. G. Sreejith, M. Safonova, Jayant Murthy

Abstract: We have begun a program of high altitude ballooning at the Indian Institute of Astrophysics, Bangalore. Recent advances in balloons as well as in electronics have made possible scientific payloads at costs accessible to university departments. The primary purpose of this activity is to test low-cost ultraviolet (UV) payloads for eventual space flight, but to also explore phenomena occurring in the… ▽ More We have begun a program of high altitude ballooning at the Indian Institute of Astrophysics, Bangalore. Recent advances in balloons as well as in electronics have made possible scientific payloads at costs accessible to university departments. The primary purpose of this activity is to test low-cost ultraviolet (UV) payloads for eventual space flight, but to also explore phenomena occurring in the upper atmosphere, including sprites and meteorite impacts, using balloon-borne payloads. This paper discusses the results of three tethered balloon experiments carried out at the CREST campus of IIA, Hosakote and our plans for the future. We also describe the stages of payload development for these experiments. △ Less

Submitted 5 April, 2013; v1 submitted 5 February, 2013; originally announced February 2013.

Comments: 8 pages, 5 figures, replaced after Referee's comments, published in CURRENT SCIENCE

Journal ref: CURRENT SCIENCE, VOL. 104, NO. 6, 25 MARCH 2013

Large Scale Extinction Maps with UVIT

Authors: S. Ravichandran, Preethi Krishnamoorthy, Margarita Safonova, Jayant Murthy

Abstract: The Ultraviolet Imaging Telescope (UVIT) is scheduled to be launched as a part of the ASTROSAT satellite. As part of the mission planning for the instrument we have studied the efficacy of UVIT observations for interstellar extinction measurements. We find that in the best case scenario, the UVIT can measure the reddening to an accuracy of about 0.02 magnitudes, which combined with the derived dis… ▽ More The Ultraviolet Imaging Telescope (UVIT) is scheduled to be launched as a part of the ASTROSAT satellite. As part of the mission planning for the instrument we have studied the efficacy of UVIT observations for interstellar extinction measurements. We find that in the best case scenario, the UVIT can measure the reddening to an accuracy of about 0.02 magnitudes, which combined with the derived distances to the stars, will enable us to model the three-dimensional distribution of extinction in our Galaxy. The knowledge of the distribution of the ISM will then be used to study distant objects, affected by it. This work points the way to further refining the UVIT mission plan to best satisfy different science studies. △ Less

Submitted 11 February, 2013; v1 submitted 4 January, 2013; originally announced January 2013.

Comments: 4 pages, 5 figures, accepted for publication in Astrophysics and Space Science

Journal ref: 2013Ap&SS.tmp...23R

Planets in the Early Universe

Authors: Yu. A. Shchekinov, M. Safonova, J. Murthy

Abstract: Several planets have recently been discovered around old metal-poor stars, implying that these planets are also old, formed in the early Universe. The canonical theory suggests that the conditions for their formation could not have existed at such early epochs. In this paper we argue that the required conditions, such as sufficiently high dust-to-gas ratio, could in fact have existed in the early… ▽ More Several planets have recently been discovered around old metal-poor stars, implying that these planets are also old, formed in the early Universe. The canonical theory suggests that the conditions for their formation could not have existed at such early epochs. In this paper we argue that the required conditions, such as sufficiently high dust-to-gas ratio, could in fact have existed in the early Universe immediately following the first episode of metal production in Pop. III stars, both in metal-enhanced and metal-deficient environments. Metal-rich regions may have existed in multiple isolated pockets of enriched and weakly-mixed gas close to the massive Pop. III stars. Observations of quasars at redshifts $z\sim 5$, and gamma-ray bursts at $z\sim 6$, show a very wide spread of metals in absorption from $\rm [X/H]\simeq -3$ to $\simeq -0.5$. This suggests that physical conditions in the metal-abundant clumps could have been similar to where protoplanets form today. However, planets could have formed even in low-metallicity environments, where formation of stars is expected to proceed due to lower opacity at higher densities. In such cases, the circumstellar accretion disks are expected to rotate faster than their high-metallicity analogues. This can result in the enhancement of dust particles at the disk periphery, where they can coagulate and start forming planetesimals. In conditions with the low initial specific angular momentum, radiation from the central protostar can act as a trigger to drive instabilities with masses in the Earth to Jupiter mass range. Discoveries of planets around old metal-poor stars (e.g. HIP 11952, $\rm [Fe/H]\sim -1.95$) show that planets did indeed form in the early Universe and this may require modification of our understanding of the physical processes that produce them. This work is an attempt to provide a heuristic scenario for their existence. △ Less

Submitted 2 April, 2013; v1 submitted 3 December, 2012; originally announced December 2012.

Comments: 21 pages, 4 figs, accepted in ApSS

Journal ref: Astrophys.Space Sci. 346 (2013) 31-40

Variables in Globular Cluster NGC 5024

Authors: M. Safonova, C. S. Stalin

Abstract: We present the results of a commissioning campaign to observe Galactic globular clusters for the search of microlensing events. The central 10' X 10' region of the globular cluster NGC 5024 was monitored using the 2-m Himalayan Chandra Telescope in R-band for a period of about 8 hours on 24 March 2010. Light curves were obtained for nearly 10,000 stars, using a modified Difference Image Analysis (… ▽ More We present the results of a commissioning campaign to observe Galactic globular clusters for the search of microlensing events. The central 10' X 10' region of the globular cluster NGC 5024 was monitored using the 2-m Himalayan Chandra Telescope in R-band for a period of about 8 hours on 24 March 2010. Light curves were obtained for nearly 10,000 stars, using a modified Difference Image Analysis (DIA) technique. We identified all known variables within our field of view and revised periods and status of some previously reported short-period variables. We report about eighty new variable sources and present their equatorial coordinates, periods, light curves and possible types. Out of these, 16 are SX Phe stars, 10 are W UMa-type stars, 14 are probable RR Lyrae stars and 2 are detached eclipsing binaries. Nine of the newly discovered SX Phe stars and two eclipsing binaries belong to the Blue Straggler Star (BSS) population. △ Less

Submitted 25 May, 2011; v1 submitted 22 May, 2011; originally announced May 2011.

Comments: 29 pages, 22 figures, replaced with rewritten data reduction part

Detection of IMBHs from microlensing in globular clusters

Authors: M. Safonova, C. S. Stalin

Abstract: Globular clusters have been alternatively predicted to host intermediate-mass black holes (IMBHs) or nearly impossible to form and retain them in their centres. Over the last decade enough theoretical and observational evidence have accumulated to believe that many galactic globular clusters may host IMBHs in their centres, just like galaxies do. The well-established correlations between the sup… ▽ More Globular clusters have been alternatively predicted to host intermediate-mass black holes (IMBHs) or nearly impossible to form and retain them in their centres. Over the last decade enough theoretical and observational evidence have accumulated to believe that many galactic globular clusters may host IMBHs in their centres, just like galaxies do. The well-established correlations between the supermassive black holes and their host galaxies do suggest that, in extrapolation, globular clusters (GCs) follow the same relations. Most of the attempts in search of the central black holes (BHs) are not direct and present enormous observational difficulties due to the crowding of stars in the GC cores. Here we propose a new method of detection of the central BH -- the microlensing of the cluster stars by the central BH. If the core of the cluster is resolved, the direct determination of the lensing curve and lensing system parameters are possible; if unresolved, the differential imaging technique can be applied. We calculate the optical depth to central BH microlensing for a selected list of Galactic GCs and estimate the average time duration of the events. We present the observational strategy and discuss the detectability of microlensing events using a 2-m class telescope. △ Less

Submitted 8 December, 2009; originally announced December 2009.

Comments: 10 pages, 11 figures, accepted in New Astronomy

Journal ref: New Astron.15:450-459,2010

Extrapolating SMBH correlations down the mass scale: the case for IMBHs in globular clusters

Authors: Margarita Safonova, Prajval Shastri

Abstract: Empirical evidence for both stellar mass black holes M_bh<10^2 M_sun) and supermassive black holes (SMBHs, M_bh>10^5 M_sun) is well established. Moreover, every galaxy with a bulge appears to host a SMBH, whose mass is correlated with the bulge mass, and even more strongly with the central stellar velocity dispersion sigma_c, the `M-sigma' relation. On the other hand, evidence for "intermediate-… ▽ More Empirical evidence for both stellar mass black holes M_bh<10^2 M_sun) and supermassive black holes (SMBHs, M_bh>10^5 M_sun) is well established. Moreover, every galaxy with a bulge appears to host a SMBH, whose mass is correlated with the bulge mass, and even more strongly with the central stellar velocity dispersion sigma_c, the `M-sigma' relation. On the other hand, evidence for "intermediate-mass" black holes (IMBHs, with masses in the range 1^2 - 10^5 M_sun) is relatively sparse, with only a few mass measurements reported in globular clusters (GCs), dwarf galaxies and low-mass AGNs. We explore the question of whether globular clusters extend the M-sigma relationship for galaxies to lower black hole masses and find that available data for globular clusters are consistent with the extrapolation of this relationship. We use this extrapolated M-sigma relationship to predict the putative black hole masses of those globular clusters where existence of central IMBH was proposed. We discuss how globular clusters can be used as a constraint on theories making specific predictions for the low-mass end of the M-sigma relation. △ Less

Submitted 3 December, 2009; v1 submitted 14 October, 2009; originally announced October 2009.

Comments: 14 pages, 3 figures, accepted for publication in Astrophysics and Space Science; fixed typos and a quote in Sec. 3

Journal ref: Astrophys.Space Sci.325:47-58,2010

Prospects for Observations of Transient UV Events with the TAUVEX UV Observatory

Authors: Margarita Safonova, C. Sivaram, Jayant Murthy

Abstract: Transient events have posed special problems in astronomy because of the intrinsic difficulty of their detection, and a new class of observatories such as the Pan-STARRS and LSST are coming up specifically to observe these energetic events. In this paper we discuss the UV transient events from two specific sources, such as possible collisions in extrasolar planetary systems and M dwarf flares, t… ▽ More Transient events have posed special problems in astronomy because of the intrinsic difficulty of their detection, and a new class of observatories such as the Pan-STARRS and LSST are coming up specifically to observe these energetic events. In this paper we discuss the UV transient events from two specific sources, such as possible collisions in extrasolar planetary systems and M dwarf flares, to find the probability of their detection by space UV observatories, in particular, by the Tel Aviv University Explorer (TAUVEX). TAUVEX is an UV imaging experiment that will image large parts of the sky in the wavelength region between 120 and 350 nm. TAUVEX is a collaborative effort between the Indian Institute of Astrophysics (IIA) and Tel Aviv University, and is scheduled for an early-2009 launch with at least three years of operations. The scientific instrument has been fabricated at El-Op in Israel, with the satellite interfaces, launch and flight operations provided by the Indian Space Research Organization (ISRO). The ground-based software development is the responsibility of the IIA while other aspects of the mission are the joint responsibility of IIA and Tel Aviv University. TAUVEX Science Team (TST) have created a coherent observing program to address several Key Areas science objectives, one of them is a program to study short-scale UV transient events. We have estimated that in one year of TAUVEX observations we can expect about 90-350 short-scale transient events. Because we obtain real-time telemetry with TAUVEX, we will be able to catch transients early in their evolution and to alert other observatories. We also present a description of TAUVEX mission, including instrument design and its estimated performance. △ Less

Submitted 1 September, 2008; v1 submitted 20 December, 2007; originally announced December 2007.

Comments: 15 pages, 5 figures, few revisions, accepted for publication in Astrophysics & Space Science

Journal ref: Astrophys. Space Sci. (2008), 318:1-12