-
Adjusting the Potential Field Source Surface Height Based on MHD Simulations
Authors:
Zhenguang Huang,
Gabor Toth,
Jia Huang,
Nishtha Sachdeva,
Bart van der Holst,
Ward B. Manchester
Abstract:
A potential field solution is widely used to extrapolate the coronal magnetic field above the Sun's surface to a certain height. This model applies the current-free approximation and assumes that the magnetic field is entirely radial beyond the source surface height, which is defined as the radial distance from the center of the Sun. Even though the source surface is commonly specified at 2.5 Rs (…
▽ More
A potential field solution is widely used to extrapolate the coronal magnetic field above the Sun's surface to a certain height. This model applies the current-free approximation and assumes that the magnetic field is entirely radial beyond the source surface height, which is defined as the radial distance from the center of the Sun. Even though the source surface is commonly specified at 2.5 Rs (solar radii), previous studies have suggested that this value is not optimal in all cases. In this study, we propose a novel approach to specify the source surface height, by comparing the areas of the open magnetic field regions from the potential field solution with predictions made by a magnetohydrodynamics model, in our case the Alfven Wave Solar atmosphere Model. We find that the adjusted source surface height is significantly less than 2.5 Rs near solar minimum, and slightly larger than 2.5 Rs near solar maximum. We also report that the adjusted source surface height can provide a better open flux agreement with the observations near the solar minimum, while the comparison near the solar maximum is slightly worse.
△ Less
Submitted 3 March, 2024;
originally announced March 2024.
-
Solar Wind Driven from GONG Magnetograms in the Last Solar Cycle
Authors:
Zhenguang Huang,
Gabor Toth,
Nishtha Sachdeva,
Bart van der Holst
Abstract:
In a previous study, Huang et al. (2023) used the Alfven Wave Solar atmosphere Model (AWSoM), one of the widely used solar wind models in the community, driven by ADAPT-GONG magnetograms to simulate the solar wind in the last solar cycle and found that the optimal Poynting flux parameter can be estimated from either the open field area or the average unsigned radial component of the magnetic field…
▽ More
In a previous study, Huang et al. (2023) used the Alfven Wave Solar atmosphere Model (AWSoM), one of the widely used solar wind models in the community, driven by ADAPT-GONG magnetograms to simulate the solar wind in the last solar cycle and found that the optimal Poynting flux parameter can be estimated from either the open field area or the average unsigned radial component of the magnetic field in the open field regions. It was also found that the average energy deposition rate (Poynting flux) in the open field regions is approximately constant. In the current study, we expand the previous work by using GONG magnetograms to simulate the solar wind for the same Carrington rotations and determine if the results are similar to the ones obtained with ADAPT-GONG magnetograms. Our results indicate that similar correlations can be obtained from the GONG maps. Moreover, we report that ADAPT-GONG magnetograms can consistently provide better comparisons with 1 AU solar wind observations than GONG magnetograms, based on the best simulations selected by the minimum of the average curve distance for the solar wind speed and density.
△ Less
Submitted 3 March, 2024;
originally announced March 2024.
-
Solar Wind with Field Lines and Energetic Particles (SOFIE) Model: Application to Historical Solar Energetic Particle Events
Authors:
Lulu Zhao,
Igor Sokolov,
Tamas Gombosi,
David Lario,
Kathryn Whitman,
Zhenguang Huang,
Gabor Toth,
Ward Manchester,
Bart van der Holst,
Nishtha Sachdeva
Abstract:
In this paper, we demonstrate the applicability of the data-driven and self-consistent solar energetic particle model, Solar-wind with FIeld-lines and Energetic-particles (SOFIE), to simulate acceleration and transport processes of solar energetic particles. SOFIE model is built upon the Space Weather Modeling Framework (SWMF) developed at the University of Michigan. In SOFIE, the background solar…
▽ More
In this paper, we demonstrate the applicability of the data-driven and self-consistent solar energetic particle model, Solar-wind with FIeld-lines and Energetic-particles (SOFIE), to simulate acceleration and transport processes of solar energetic particles. SOFIE model is built upon the Space Weather Modeling Framework (SWMF) developed at the University of Michigan. In SOFIE, the background solar wind plasma in the solar corona and interplanetary space is calculated by the Aflvén Wave Solar-atmosphere Model(-Realtime) (AWSoM-R) driven by the near-real-time hourly updated Global Oscillation Network Group (GONG) solar magnetograms. In the background solar wind, coronal mass ejections (CMEs) are launched by placing an imbalanced magnetic flux rope on top of the parent active region, using the Eruptive Event Generator using Gibson-Low model (EEGGL). The acceleration and transport processes are modeled by the Multiple-Field-Line Advection Model for Particle Acceleration (M-FLAMPA). In this work, nine solar energetic particle events (Solar Heliospheric and INterplanetary Environment (SHINE) challenge/campaign events) are modeled. The three modules in SOFIE are validated and evaluated by comparing with observations, including the steady-state background solar wind properties, the white-light image of the CME, and the flux of solar energetic protons, at energies of > 10 MeV.
△ Less
Submitted 28 September, 2023;
originally announced September 2023.
-
The Multiview Observatory for Solar Terrestrial Science (MOST)
Authors:
N. Gopalswamy,
S. Christe,
S. F. Fung,
Q. Gong,
J. R. Gruesbeck,
L. K. Jian,
S. G. Kanekal,
C. Kay,
T. A. Kucera,
J. E. Leake,
L. Li,
P. Makela,
P. Nikulla,
N. L. Reginald,
A. Shih,
S. K. Tadikonda,
N. Viall,
L. B. Wilson III,
S. Yashiro,
L. Golub,
E. DeLuca,
K. Reeves,
A. C. Sterling,
A. R. Winebarger,
C. DeForest
, et al. (32 additional authors not shown)
Abstract:
We report on a study of the Multiview Observatory for Solar Terrestrial Science (MOST) mission that will provide comprehensive imagery and time series data needed to understand the magnetic connection between the solar interior and the solar atmosphere/inner heliosphere. MOST will build upon the successes of SOHO and STEREO missions with new views of the Sun and enhanced instrument capabilities. T…
▽ More
We report on a study of the Multiview Observatory for Solar Terrestrial Science (MOST) mission that will provide comprehensive imagery and time series data needed to understand the magnetic connection between the solar interior and the solar atmosphere/inner heliosphere. MOST will build upon the successes of SOHO and STEREO missions with new views of the Sun and enhanced instrument capabilities. This article is based on a study conducted at NASA Goddard Space Flight Center that determined the required instrument refinement, spacecraft accommodation, launch configuration, and flight dynamics for mission success. MOST is envisioned as the next generation great observatory positioned to obtain three-dimensional information of large-scale heliospheric structures such as coronal mass ejections, stream interaction regions, and the solar wind itself. The MOST mission consists of 2 pairs of spacecraft located in the vicinity of Sun-Earth Lagrange points L4 (MOST1, MOST3) and L5 (MOST2 and MOST4). The spacecraft stationed at L4 (MOST1) and L5 (MOST2) will each carry seven remote-sensing and three in-situ instrument suites, including a novel radio package known as the Faraday Effect Tracker of Coronal and Heliospheric structures (FETCH). MOST3 and MOST4 will carry only the FETCH instruments and are positioned at variable locations along the Earth orbit up to 20° ahead of L4 and 20° behind L5, respectively. FETCH will have polarized radio transmitters and receivers on all four spacecraft to measure the magnetic content of solar wind structures propagating from the Sun to Earth using the Faraday rotation technique. The MOST mission will be able to sample the magnetized plasma throughout the Sun-Earth connected space during the mission lifetime over a solar cycle.
△ Less
Submitted 10 December, 2023; v1 submitted 6 March, 2023;
originally announced March 2023.
-
Solar wind modeling with the Alfven Wave Solar atmosphere Model driven by HMI-based Near-Real-Time maps by the National Solar Observatory
Authors:
Nishtha Sachdeva,
Ward B Manchester,
Igor Sokolov,
Zhenguang Huang,
Alexander Pevtsov,
Luca Bertello,
Alexei A. Pevtsov,
Gabor Toth,
Bart van der Holst
Abstract:
We explore model performance for the Alfven Wave Solar atmosphere Model (AWSoM) with near-real-time (NRT) synoptic maps of the photospheric vector magnetic field. These maps, produced by assimilating data from the Helioseismic Magnetic Imager (HMI) onboard the Solar Dynamics Observatory (SDO), use a different method developed at the National Solar Observatory (NSO) to provide a near contemporaneou…
▽ More
We explore model performance for the Alfven Wave Solar atmosphere Model (AWSoM) with near-real-time (NRT) synoptic maps of the photospheric vector magnetic field. These maps, produced by assimilating data from the Helioseismic Magnetic Imager (HMI) onboard the Solar Dynamics Observatory (SDO), use a different method developed at the National Solar Observatory (NSO) to provide a near contemporaneous source of data to drive numerical models. Here, we apply these NSO-HMI-NRT maps to simulate three Carrington rotations (CRs): 2107-2108 (centered on 2011/03/07 20:12 CME event), 2123 (integer CR) and 2218--2219 (centered on 2019/07/2 solar eclipse), which together cover a wide range of activity level for solar cycle 24. We show simulation results, which reproduce both extreme ultraviolet emission (EUV) from the low corona while simultaneously matching in situ observations at 1 au as well as quantify the total unsigned open magnetic flux from these maps.
△ Less
Submitted 9 December, 2022;
originally announced December 2022.
-
On the specific energy and pressure in near-Earth magnetic clouds
Authors:
Debesh Bhattacharjee,
Prasad Subramanian,
Angelos Vourlidas,
Teresa Nieves-Chinchilla,
Niranjana Thejaswi,
Nishtha Sachdeva
Abstract:
The pressure and energy density of the gas and magnetic field inside solar coronal mass ejections (in relation to that in the ambient solar wind) is thought to play an important role in determining their dynamics as they propagate through the heliosphere. We compare the specific energy (${\rm erg\,g^{-1}}$) [comprising kinetic ($H_{\rm k}$), thermal ($H_{\rm th }$) and magnetic field (…
▽ More
The pressure and energy density of the gas and magnetic field inside solar coronal mass ejections (in relation to that in the ambient solar wind) is thought to play an important role in determining their dynamics as they propagate through the heliosphere. We compare the specific energy (${\rm erg\,g^{-1}}$) [comprising kinetic ($H_{\rm k}$), thermal ($H_{\rm th }$) and magnetic field ($H_{\rm mag}$) contributions] inside MCs and the solar wind background. We examine if the excess thermal + magnetic pressure and specific energy inside MCs (relative to the background) is correlated with their propagation and internal expansion speeds. We ask if the excess thermal + magnetic specific energy inside MCs might make them resemble rigid bodies in the context of aerodynamic drag. We use near-Earth in-situ data from the WIND spacecraft to identify a sample of 152 well observed interplanetary coronal mass ejections and their MC counterparts. We compute various metrics using these data to address our questions. We find that the total specific energy ($H$) inside MCs is approximately equal to that in the background solar wind. We find that the the excess (thermal + magnetic) pressure and specific energy are not well correlated with the near-Earth propagation and expansion speeds. We find that the excess thermal+magnetic specific energy $\gtrsim$ the specific kinetic energy of the solar wind incident on 81--89 \% of the MCs we study. This might explain how MCs retain their structural integrity and resist deformation by the solar wind bulk flow.
△ Less
Submitted 29 October, 2022;
originally announced October 2022.
-
Modeling the Solar Wind During Different Phases of the Last Solar Cycle
Authors:
Zhenguang Huang,
Gabor Toth,
Nishtha Sachdeva,
Lulu Zhao,
Bartholomeus van der Holst,
Igor Sokolov,
Ward Manchester,
Tamas Gombosi
Abstract:
We describe our first attempt to systematically simulate the solar wind during different phases of the last solar cycle with the Alfvén Wave Solar atmosphere Model (AWSoM) developed at the University of Michigan. Key to this study is the determination of the optimal values of one of the most important input parameters of the model, the Poynting flux parameter, which prescribes the energy flux pass…
▽ More
We describe our first attempt to systematically simulate the solar wind during different phases of the last solar cycle with the Alfvén Wave Solar atmosphere Model (AWSoM) developed at the University of Michigan. Key to this study is the determination of the optimal values of one of the most important input parameters of the model, the Poynting flux parameter, which prescribes the energy flux passing through the chromospheric boundary of the model in the form of Alfvén wave turbulence. It is found that the optimal value of the Poynting flux parameter is correlated with the area of the open magnetic field regions with the Spearman's correlation coefficient of 0.96 and anti-correlated with the average unsigned radial component of the magnetic field with the Spearman's correlation coefficient of -0.91. Moreover, the Poynting flux in the open field regions is approximately constant in the last solar cycle, which needs to be validated with observations and can shed light on how Alfvén wave turbulence accelerates the solar wind during different phases of the solar cycle. Our results can also be used to set the Poynting flux parameter for real-time solar wind simulations with AWSoM.
△ Less
Submitted 24 March, 2023; v1 submitted 5 October, 2022;
originally announced October 2022.
-
What Sustained Multi-Disciplinary Research Can Achieve: The Space Weather Modeling Framework
Authors:
Tamas I. Gombosi,
Yuxi Chen,
Alex Glocer,
Zhenguang Huang,
Xianzhe Jia,
Michael W. Liemohn,
Ward B. Manchester,
Tuija Pulkkinen,
Nishtha Sachdeva,
Qusai Al Shidi,
Igor V. Sokolov,
Judit Szente,
Valeriy Tenishev,
Gabor Toth,
Bart van der Holst,
Daniel T. Welling,
Lulu Zhao,
Shasha Zou
Abstract:
MHD-based global space weather models have mostly been developed and maintained at academic institutions. While the "free spirit" approach of academia enables the rapid emergence and testing of new ideas and methods, the lack of long-term stability and support makes this arrangement very challenging. This paper describes a successful example of a university-based group, the Center of Space Environ…
▽ More
MHD-based global space weather models have mostly been developed and maintained at academic institutions. While the "free spirit" approach of academia enables the rapid emergence and testing of new ideas and methods, the lack of long-term stability and support makes this arrangement very challenging. This paper describes a successful example of a university-based group, the Center of Space Environment Modeling (CSEM) at the University of Michigan, that developed and maintained the Space Weather Modeling Framework (SWMF) and its core element, the BATS-R-US extended MHD code. It took a quarter of a century to develop this capability and reach its present level of maturity that makes it suitable for research use by the space physics community through the Community Coordinated Modeling Center (CCMC) as well as operational use by the NOAA Space Weather Prediction Center (SWPC).
△ Less
Submitted 27 May, 2021;
originally announced May 2021.
-
Deriving CME density from remote sensing data and comparison to in-situ measurements
Authors:
M. Temmer,
L. Holzknecht,
M. Dumbovic,
B. Vrsnak,
N. Sachdeva,
S. G. Heinemann,
K. Dissauer,
C. Scolini,
E. Asvestari,
A. M. Veronig,
S. J. Hofmeister
Abstract:
We determine the 3D geometry and deprojected mass of 29 well-observed coronal mass ejections (CMEs) and their interplanetary counterparts (ICMEs) using combined STEREO-SOHO white-light data. From the geometry parameters we calculate the volume of the CME for the magnetic ejecta (flux-rope type geometry) and sheath structure (shell-like geometry resembling the (I)CME frontal rim). Working under the…
▽ More
We determine the 3D geometry and deprojected mass of 29 well-observed coronal mass ejections (CMEs) and their interplanetary counterparts (ICMEs) using combined STEREO-SOHO white-light data. From the geometry parameters we calculate the volume of the CME for the magnetic ejecta (flux-rope type geometry) and sheath structure (shell-like geometry resembling the (I)CME frontal rim). Working under the assumption that the CME mass is roughly equally distributed within a specific volume, we expand the CME self-similarly and calculate the CME density for distances close to the Sun (15-30 Rs) and at 1AU. Specific trends are derived comparing calculated and in-situ measured proton densities at 1AU, though large uncertainties are revealed due to the unknown mass and geometry evolution: i) a moderate correlation for the magnetic structure having a mass that stays rather constant (~0.56-0.59), and ii) a weak correlation for the sheath density (~0.26) by assuming the sheath region is an extra mass - as expected for a mass pile-up process - that is in its amount comparable to the initial CME deprojected mass. High correlations are derived between in-situ measured sheath density and the solar wind density (~ -0.73) and solar wind speed (~0.56) as measured 24 hours ahead of the arrival of the disturbance. This gives additional confirmation that the sheath-plasma indeed stems from piled-up solar wind material. While the CME interplanetary propagation speed is not related to the sheath density, the size of the CME may play some role in how much material could be piled up.
△ Less
Submitted 13 November, 2020;
originally announced November 2020.
-
Thermodynamic Structure of the Solar Corona: Tomographic Reconstructions and MHD Modeling
Authors:
D. G. Lloveras,
A. M. Vásquez,
F. A. Nuevo,
C. Mac Cormack,
N. Sachdeva,
W. Manchester IV,
B. Van der Holst,
R. A. Frazin
Abstract:
We carry out a study of the global three-dimensional (3D) structure of the electron density and temperature of the quiescent inner solar corona ($r<1.25 R_\odot$) by means of tomographic reconstructions and magnetohydrodynamic simulations. We use differential emission measure tomography (DEMT) and the Alfvén Wave Solar Model (AWSoM), in their latest versions. Two target rotations were selected fro…
▽ More
We carry out a study of the global three-dimensional (3D) structure of the electron density and temperature of the quiescent inner solar corona ($r<1.25 R_\odot$) by means of tomographic reconstructions and magnetohydrodynamic simulations. We use differential emission measure tomography (DEMT) and the Alfvén Wave Solar Model (AWSoM), in their latest versions. Two target rotations were selected from the solar minimum between solar cycles (SCs) 23 and 24 and the declining phase of SC 24. We report in quantitative detail on the 3D thermodynamic structure of the core and outer layers of the streamer belt, and of the high latitude coronal holes (CH), as revealed by the DEMT analysis. We report on the presence of two types of structures within the streamer belt, loops with temperature decreasing/increasing with height (dubbed down/up loops), as reported first in previous DEMT studies. We also estimate the heating energy flux required at the coronal base to keep these structures stable, found to be or order $10^5 erg\, cm^{-2} s^{-1}$, consistently with previous DEMT and spectroscopic studies. We discuss how these findings are consistent with coronal dissipation of Alfvén waves. We compare the 3D results of DEMT and AWSoM in distinct magnetic structures. We show that the agreement between the products of both techniques is the best so far, with an overall agreement $\lesssim 20\%$, depending on the target rotation and the specific coronal region. In its current implementation the ASWsoM model can not reproduce down loops though. Also, in the source region of the fast and slow components of the solar wind, the electron density of the AWSoM model increases with latitude, opposite to the trend observed in DEMT reconstructions.
△ Less
Submitted 14 April, 2020;
originally announced April 2020.
-
Validation of the Alfvén Wave Solar atmosphere Model (AWSoM) with Observations from the Low Corona to 1 AU
Authors:
N. Sachdeva,
B. van der Holst,
W. B. Manchester,
G. Tóth,
Y. Chen,
D. G. Lloveras,
A. M. Vásquez,
Philippe Lamy,
Julien Wojak,
B. V. Jackson,
H. -S. Yu,
C. J. Henney
Abstract:
We perform a validation study of the latest version of the Alfvén Wave Solar atmosphere Model (AWSoM) within the Space Weather Modeling Framework (SWMF). To do so, we compare the simulation results of the model with a comprehensive suite of observations for Carrington rotations representative of the solar minimum conditions extending from the solar corona to the heliosphere up to the Earth. In the…
▽ More
We perform a validation study of the latest version of the Alfvén Wave Solar atmosphere Model (AWSoM) within the Space Weather Modeling Framework (SWMF). To do so, we compare the simulation results of the model with a comprehensive suite of observations for Carrington rotations representative of the solar minimum conditions extending from the solar corona to the heliosphere up to the Earth. In the low corona ($r < 1.25$ \Rs), we compare with EUV images from both STEREO-A/EUVI and SDO/AIA and to three-dimensional (3-D) tomographic reconstructions of the electron temperature and density based on these same data. We also compare the model to tomographic reconstructions of the electron density from SOHO/LASCO observations ($2.55 < r < 6.0$\Rs). In the heliosphere, we compare model predictions of solar wind speed with velocity reconstructions from InterPlanetary Scintillation (IPS) observations. For comparison with observations near the Earth, we use OMNI data. Our results show that the improved AWSoM model performs well in quantitative agreement with the observations between the inner corona and 1 AU. The model now reproduces the fast solar wind speed in the polar regions. Near the Earth, our model shows good agreement with observations of solar wind velocity, proton temperature and density. AWSoM offers an extensive application to study the solar corona and larger heliosphere in concert with current and future solar missions as well as being well suited for space weather predictions.
△ Less
Submitted 17 October, 2019;
originally announced October 2019.
-
Dynamics of solar Coronal Mass Ejections: forces that impact their propagation
Authors:
Nishtha Sachdeva
Abstract:
We investigate the Sun-Earth dynamics of a set of 38 well-observed Coronal Mass Ejections(CMEs) using data from the STEREO, SOHO missions and WIND instrument. We seek to quantify the relative contributions of Lorentz force and aerodynamic drag on their propagation. The CMEs are 3D reconstructed using the Graduated Cylindrical Shell(GCS) model to derive observed CME parameters.Using a microphysical…
▽ More
We investigate the Sun-Earth dynamics of a set of 38 well-observed Coronal Mass Ejections(CMEs) using data from the STEREO, SOHO missions and WIND instrument. We seek to quantify the relative contributions of Lorentz force and aerodynamic drag on their propagation. The CMEs are 3D reconstructed using the Graduated Cylindrical Shell(GCS) model to derive observed CME parameters.Using a microphysical prescription of the drag coefficient,we find that solar wind aerodynamic drag adequately accounts for the dynamics of the fastest CMEs from as low as 3.5 Rs. For relatively slower CMEs, however, we find that when the drag-based model is initiated below the distances ranging from 12 to 50 Rs,the observed CME trajectories cannot be accounted for.This suggests that aerodynamic drag force dominates the dynamics of slower CMEs only above these heights.To investigate CME dynamics below the heights where aerodynamic drag dominates, we consider the Torus Instability model for the driving Lorentz force. We find that for fast CMEs,Lorentz forces become negligible in comparison to aerodynamic drag as early as 3.5-4 Rs.For slow CMEs, however, they become negligible only by 12-50 Rs.This justifies the success of the drag-only model for fast CMEs. In case of slow CMEs, the Lorentz force is only slightly smaller than the drag force even beyond 12-50 Rs.For these slow events,our results suggest that some of the magnetic flux carried by CMEs might be expended in expansion or heating. These dissipation effects might be important in describing the propagation of slower CMEs. To the best of our knowledge,this is the first systematic study in this regard using a diverse CME sample. A physical understanding of the forces that affect CME propagation and how they compare with each other at various heliocentric distances is an important ingredient in building tools for describing and predicting CME trajectories.
△ Less
Submitted 29 July, 2019;
originally announced July 2019.
-
Episodic Jets from Black Hole Accretion Disks
Authors:
Mayur B. Shende,
Prasad Subramanian,
Nishtha Sachdeva
Abstract:
Several active galactic nuclei and microquasars are observed to eject plasmoids that move at relativistic speeds. We envisage the plasmoids as pre-existing current carrying magnetic flux ropes that were initially anchored in the accretion disk-corona. The plasmoids are ejected outwards via a mechanism called the toroidal instability (TI). The TI, which was originally explored in the context of lab…
▽ More
Several active galactic nuclei and microquasars are observed to eject plasmoids that move at relativistic speeds. We envisage the plasmoids as pre-existing current carrying magnetic flux ropes that were initially anchored in the accretion disk-corona. The plasmoids are ejected outwards via a mechanism called the toroidal instability (TI). The TI, which was originally explored in the context of laboratory tokamak plasmas, has been very successful in explaining coronal mass ejections from the Sun. Our model predictions for plasmoid trajectories compare favorably with a representative set of multi-epoch observations of radio emitting knots from the radio galaxy 3C120, which were preceded by dips in Xray intensity.
△ Less
Submitted 24 April, 2019;
originally announced April 2019.
-
CME dynamics using STEREO & LASCO observations: the relative importance of Lorentz forces and solar wind drag
Authors:
Nishtha Sachdeva,
Prasad Subramanian,
Angelos Vourlidas,
Volker Bothmer
Abstract:
We seek to quantify the relative contributions of Lorentz forces and aerodynamic drag on the propagation of solar coronal mass ejections (CMEs). We use Graduated Cylindrical Shell (GCS) model fits to a representative set of 38 CMEs observed with the SOHO and STEREO spacecraft. We find that the Lorentz forces generally peak between 1.65 and 2.45 Rsun for all CMEs. For fast CMEs, Lorentz forces beco…
▽ More
We seek to quantify the relative contributions of Lorentz forces and aerodynamic drag on the propagation of solar coronal mass ejections (CMEs). We use Graduated Cylindrical Shell (GCS) model fits to a representative set of 38 CMEs observed with the SOHO and STEREO spacecraft. We find that the Lorentz forces generally peak between 1.65 and 2.45 Rsun for all CMEs. For fast CMEs, Lorentz forces become negligible in comparison to aerodynamic drag as early as 3.5--4 Rsun. For slow CMEs, however, they become negligible only by 12--50 Rsun. For these slow events, our results suggest that some of the magnetic flux might be expended in CME expansion or heating. In other words, not all of it contributes to directed propagation. Our results are expected to be important in building a physical model for understanding the Sun-Earth dynamics of CMEs.
△ Less
Submitted 10 July, 2017; v1 submitted 13 May, 2017;
originally announced May 2017.
-
CME propagation: Where does solar wind drag take over?
Authors:
Nishtha Sachdeva,
Prasad Subramanian,
Robin Colaninno,
Angelos Vourlidas
Abstract:
We investigate the Sun-Earth dynamics of a set of eight well observed solar coronal mass ejections (CMEs) using data from the STEREO spacecraft. We seek to quantify the extent to which momentum coupling between these CMEs and the ambient solar wind (i.e., the aerodynamic drag) influences their dynamics. To this end, we use results from a 3D flux rope model fit to the CME data. We find that solar w…
▽ More
We investigate the Sun-Earth dynamics of a set of eight well observed solar coronal mass ejections (CMEs) using data from the STEREO spacecraft. We seek to quantify the extent to which momentum coupling between these CMEs and the ambient solar wind (i.e., the aerodynamic drag) influences their dynamics. To this end, we use results from a 3D flux rope model fit to the CME data. We find that solar wind aerodynamic drag adequately accounts for the dynamics of the fastest CME in our sample. For the relatively slower CMEs, we find that drag-based models initiated below heliocentric distances ranging from 15 to 50 $R_{\odot}$ cannot account for the observed CME trajectories. This is at variance with the general perception that the dynamics of slow CMEs are influenced primarily by solar wind drag from a few $R_{\odot}$ onwards. Several slow CMEs propagate at roughly constant speeds above 15--50 $R_{\odot}$. Drag-based models initiated above these heights therefore require negligible aerodynamic drag to explain their observed trajectories.
△ Less
Submitted 21 August, 2015; v1 submitted 18 July, 2015;
originally announced July 2015.
