-
Observations of Fan-Spine Topology by Solar Orbiter/EUI: Rotational Motions and Indications of Alfvén Waves
Authors:
E. Petrova,
T. Van Doorsselaere,
D. Berghmans,
S. Parenti,
G. Valori,
J. Plowman
Abstract:
Torsional Alfvén waves do not produce any intensity variation and are, therefore, challenging to observe with imaging instruments. Previously, Alfvén wave observations were reported throughout all the layers of the solar atmosphere using spectral imaging. We present an observation of a torsional Alfvén wave detected in an inverted y-shape structure observed with the HRIEUV telescope of the EUI ins…
▽ More
Torsional Alfvén waves do not produce any intensity variation and are, therefore, challenging to observe with imaging instruments. Previously, Alfvén wave observations were reported throughout all the layers of the solar atmosphere using spectral imaging. We present an observation of a torsional Alfvén wave detected in an inverted y-shape structure observed with the HRIEUV telescope of the EUI instrument onboard Solar Orbiter in its 174 Å channel. The feature consists of two footpoints connected through short loops and a spine with a length of 30 Mm originating from one of the footpoints. In the current work, we also make use of the simultaneous observations from two other instruments onboard Solar Orbiter. The first one is PHI that is used to derive the magnetic configuration of the observed feature. The second one is SPICE that provided observations of intensity maps in different lines including Ne VIII and C III lines. We also address the issues of the SPICE point spread function and its influence on the Doppler maps via performed forward modeling analysis. The difference movie shows clear signatures of propagating rotational motions in the spine. Doppler maps obtained with SPICE show strong signal in the spine region. Under the assumption that the recovered point spread function is mostly correct, synthesized raster images confirm that this signal is predominantly physical. We conclude that the presented observations are compatible with an interpretation of either propagating torsional Alfvén waves in a low coronal structure or untwisting of a flux rope. This is the first time we see signatures of propagating torsional motion in corona as observed by the three instruments onboard Solar Orbiter.
△ Less
Submitted 16 April, 2024;
originally announced April 2024.
-
High-fidelity 3D Reconstruction of Solar Coronal Physics with the Updated CROBAR Method
Authors:
Joseph Plowman,
Daniel B. Seaton,
Amir Caspi,
J. Marcus Hughes,
Matthew J. West
Abstract:
We present an extension of the Coronal Reconstruction Onto B-Aligned Regions (CROBAR) method to Linear Force Free Field (LFFF) extrapolations, and apply it to the reconstruction of a set of AIA, MDI, and STEREO EUVI data. The results demonstrate that CROBAR can not only reconstruct coronal emission structures, but also that it can help constrain the coronal field extrapolations via the LFFF's heli…
▽ More
We present an extension of the Coronal Reconstruction Onto B-Aligned Regions (CROBAR) method to Linear Force Free Field (LFFF) extrapolations, and apply it to the reconstruction of a set of AIA, MDI, and STEREO EUVI data. The results demonstrate that CROBAR can not only reconstruct coronal emission structures, but also that it can help constrain the coronal field extrapolations via the LFFF's helicity $α$ parameter. They also provide a real-world example of how CROBAR can easily incorporate information from multiple perspectives to improve its reconstructions, and we also use the additional perspectives to help validate the reconstructions. We furthermore touch on the use of real-world emission passbands rather than idealized power-law type ones using DEMs. We conclude with a comparison of CROBAR generated emission to observed emission and those produced with idealized DEM based power-laws. These results further illustrate the promise of CROBAR for real-world applications, and we make available a preliminary release of the software available for download.
△ Less
Submitted 14 September, 2023;
originally announced September 2023.
-
SPICE Connection Mosaics to link the Sun's surface and the heliosphere
Authors:
T. Varesano,
D. M. Hassler,
N. Zambrana Prado,
J. Plowman,
G. Del Zanna,
S. Parenti,
H. E. Mason,
A. Giunta,
F. Auchere,
M. Carlsson,
A. Fludra,
H. Peter,
D. Muller,
D. Williams,
R. Aznar Cuadrado,
K. Barczynski,
E. Buchlin,
M. Caldwell,
T. Fredvik,
T. Grundy,
S. Guest,
L. Harra,
M. Janvier,
T. Kucera,
S. Leeks
, et al. (6 additional authors not shown)
Abstract:
We present an analysis of the first connection mosaic made by the SPICE instrument on board of the ESA / NASA Solar Orbiter mission on March 2nd, 2022. The data will be used to map coronal composition that will be compared with in-situ measurements taken by SWA/HIS to establish the coronal origin of the solar wind plasma observed at Solar Orbiter. The SPICE spectral lines were chosen to have varyi…
▽ More
We present an analysis of the first connection mosaic made by the SPICE instrument on board of the ESA / NASA Solar Orbiter mission on March 2nd, 2022. The data will be used to map coronal composition that will be compared with in-situ measurements taken by SWA/HIS to establish the coronal origin of the solar wind plasma observed at Solar Orbiter. The SPICE spectral lines were chosen to have varying sensitivity to the First Ionization Potential (FIP) effect, and therefore the radiances of the spectral lines will vary significantly depending on whether the elemental composition is coronal or photospheric. We investigate the link between the behavior of sulfur with the hypothesis that Alfvén waves drive FIP fractionation above the chromosphere. We perform temperature diagnostics using line ratios and Emission Measure (EM) loci, and compute relative FIP biases using three different approaches (two line ratio (2LR), ratios of linear combinations of spectral lines (LCR), and differential emission measure (DEM) inversion) to perform composition diagnostics in the corona. We then compare the SPICE composition analysis and EUI data of the potential solar wind source regions to the SWA / HIS data products. Radiance maps are extracted from SPICE spectral data cubes, with values matching previous observations. We find isothermal plasma of around LogT = 5.8 for the active region loops targeted, and that higher FIP-bias values are present at the footpoints of the coronal loops associated with two active regions. Comparing the results with the SWA/HIS data products encourages us to think that Solar Orbiter was connected to a source of slow solar wind during this observation campaign. We demonstrate FIP fractionation in observations of the upper chromosphere and transition region, emphasized by the behavior of the intermediate-FIP element sulfur.
△ Less
Submitted 12 February, 2024; v1 submitted 2 August, 2023;
originally announced August 2023.
-
A multiple spacecraft detection of the 2 April 2022 M-class flare and filament eruption during the first close Solar Orbiter perihelion
Authors:
M. Janvier,
S. Mzerguat,
P. R. Young,
É. Buchlin,
A. Manou,
G. Pelouze,
D. M. Long,
L. Green,
A. Warmuth,
F. Schuller,
P. Démoulin,
D. Calchetti,
F. Kahil,
L. Bellot Rubio,
S. Parenti,
S. Baccar,
K. Barczynski,
L. K. Harra,
L. A. Hayes,
W. T. Thompson,
D. Müller,
D. Baker,
S. Yardley,
D. Berghmans,
C. Verbeeck
, et al. (34 additional authors not shown)
Abstract:
The Solar Orbiter mission completed its first remote-sensing observation windows in the spring of 2022. On 2/4/2022, an M-class flare followed by a filament eruption was seen both by the instruments on board the mission and from several observatories in Earth's orbit. The complexity of the observed features is compared with the predictions given by the standard flare model in 3D. We use the observ…
▽ More
The Solar Orbiter mission completed its first remote-sensing observation windows in the spring of 2022. On 2/4/2022, an M-class flare followed by a filament eruption was seen both by the instruments on board the mission and from several observatories in Earth's orbit. The complexity of the observed features is compared with the predictions given by the standard flare model in 3D. We use the observations from a multi-view dataset, which includes EUV imaging to spectroscopy and magnetic field measurements. These data come from IRIS, SDO, Hinode, as well as several instruments on Solar Orbiter. Information given by SDO/HMI and Solar Orbiter PHI/HRT shows that a parasitic polarity emerging underneath the filament is responsible for bringing the flux rope to an unstable state. As the flux rope erupts, Hinode/EIS captures blue-shifted emission in the transition region and coronal lines in the northern leg of the flux rope prior to the flare peak. Solar Orbiter SPICE captures the whole region, complementing the Doppler diagnostics of the filament eruption. Analyses of the formation and evolution of a complex set of flare ribbons and loops show that the parasitic emerging bipole plays an important role in the evolution of the flaring region. While the analysed data are overall consistent with the standard flare model, the present particular magnetic configuration shows that surrounding magnetic activity such as nearby emergence needs to be taken into account to fully understand the processes at work. This filament eruption is the first to be covered from different angles by spectroscopic instruments, and provides an unprecedented diagnostic of the multi-thermal structures present before and during the flare. This dataset of an eruptive event showcases the capabilities of coordinated observations with the Solar Orbiter mission.
△ Less
Submitted 5 July, 2023;
originally announced July 2023.
-
Magnetic Energy Powers the Corona: How We Can Understand its 3D Storage & Release
Authors:
Amir Caspi,
Daniel B. Seaton,
Roberto Casini,
Cooper Downs,
Sarah E. Gibson,
Holly Gilbert,
Lindsay Glesener,
Silvina E. Guidoni,
J. Marcus Hughes,
David McKenzie,
Joseph Plowman,
Katharine K. Reeves,
Pascal Saint-Hilaire,
Albert Y. Shih,
Matthew J. West
Abstract:
The coronal magnetic field is the prime driver behind many as-yet unsolved mysteries: solar eruptions, coronal heating, and the solar wind, to name a few. It is, however, still poorly observed and understood. We highlight key questions related to magnetic energy storage, release, and transport in the solar corona, and their relationship to these important problems. We advocate for new and multi-po…
▽ More
The coronal magnetic field is the prime driver behind many as-yet unsolved mysteries: solar eruptions, coronal heating, and the solar wind, to name a few. It is, however, still poorly observed and understood. We highlight key questions related to magnetic energy storage, release, and transport in the solar corona, and their relationship to these important problems. We advocate for new and multi-point co-optimized measurements, sensitive to magnetic field and other plasma parameters, spanning from optical to $γ$-ray wavelengths, to bring closure to these long-standing and fundamental questions. We discuss how our approach can fully describe the 3D magnetic field, embedded plasma, particle energization, and their joint evolution to achieve these objectives.
△ Less
Submitted 25 May, 2023;
originally announced May 2023.
-
Improving Multi-Dimensional Data Formats, Access, and Assimilation Tools for the Twenty-First Century
Authors:
Daniel B. Seaton,
Amir Caspi,
Roberto Casini,
Cooper Downs,
Sarah E. Gibson,
Holly Gilbert,
Lindsay Glesener,
Silvina E. Guidoni,
J. Marcus Hughes,
David McKenzie,
Joseph Plowman,
Katharine K. Reeves,
Pascal Saint-Hilaire,
Albert Y. Shih,
Matthew J. West
Abstract:
Heliophysics image data largely relies on a forty-year-old ecosystem built on the venerable Flexible Image Transport System (FITS) data standard. While many in situ measurements use newer standards, they are difficult to integrate with multiple data streams required to develop global understanding. Additionally, most data users still engage with data in much the same way as they did decades ago. H…
▽ More
Heliophysics image data largely relies on a forty-year-old ecosystem built on the venerable Flexible Image Transport System (FITS) data standard. While many in situ measurements use newer standards, they are difficult to integrate with multiple data streams required to develop global understanding. Additionally, most data users still engage with data in much the same way as they did decades ago. However, contemporary missions and models require much more complex support for 3D multi-parameter data, robust data assimilation strategies, and integration of multiple individual data streams required to derive complete physical characterizations of the Sun and Heliospheric plasma environment. In this white paper we highlight some of the 21$^\mathsf{st}$ century challenges for data frameworks in heliophysics, consider an illustrative case study, and make recommendations for important steps the field can take to modernize its data products and data usage models. Our specific recommendations include: (1) Investing in data assimilation capability to drive advanced data-constrained models, (2) Investing in new strategies for integrating data across multiple instruments to realize measurements that cannot be produced from single observations, (3) Rethinking old data use paradigms to improve user access, develop deep understanding, and decrease barrier to entry for new datasets, and (4) Investing in research on data formats better suited for multi-dimensional data and cloud-based computing.
△ Less
Submitted 25 May, 2023;
originally announced May 2023.
-
COMPLETE: A flagship mission for complete understanding of 3D coronal magnetic energy release
Authors:
Amir Caspi,
Daniel B. Seaton,
Roberto Casini,
Cooper Downs,
Sarah E. Gibson,
Holly Gilbert,
Lindsay Glesener,
Silvina E. Guidoni,
J. Marcus Hughes,
David McKenzie,
Joseph Plowman,
Katharine K. Reeves,
Pascal Saint-Hilaire,
Albert Y. Shih,
Matthew J. West
Abstract:
COMPLETE is a flagship mission concept combining broadband spectroscopic imaging and comprehensive magnetography from multiple viewpoints around the Sun to enable tomographic reconstruction of 3D coronal magnetic fields and associated dynamic plasma properties, which provide direct diagnostics of energy release. COMPLETE re-imagines the paradigm for solar remote-sensing observations through purpos…
▽ More
COMPLETE is a flagship mission concept combining broadband spectroscopic imaging and comprehensive magnetography from multiple viewpoints around the Sun to enable tomographic reconstruction of 3D coronal magnetic fields and associated dynamic plasma properties, which provide direct diagnostics of energy release. COMPLETE re-imagines the paradigm for solar remote-sensing observations through purposefully co-optimized detectors distributed on multiple spacecraft that operate as a single observatory, linked by a comprehensive data/model assimilation strategy to unify individual observations into a single physical framework. We describe COMPLETE's science goals, instruments, and mission implementation. With targeted investment by NASA, COMPLETE is feasible for launch in 2032 to observe around the maximum of Solar Cycle 26.
△ Less
Submitted 25 May, 2023;
originally announced May 2023.
-
Slow Solar Wind Connection Science during Solar Orbiter's First Close Perihelion Passage
Authors:
Stephanie L. Yardley,
Christopher J. Owen,
David M. Long,
Deborah Baker,
David H. Brooks,
Vanessa Polito,
Lucie M. Green,
Sarah Matthews,
Mathew Owens,
Mike Lockwood,
David Stansby,
Alexander W. James,
Gherado Valori,
Alessandra Giunta,
Miho Janvier,
Nawin Ngampoopun,
Teodora Mihailescu,
Andy S. H. To,
Lidia van Driel-Gesztelyi,
Pascal Demoulin,
Raffaella D'Amicis,
Ryan J. French,
Gabriel H. H. Suen,
Alexis P. Roulliard,
Rui F. Pinto
, et al. (54 additional authors not shown)
Abstract:
The Slow Solar Wind Connection Solar Orbiter Observing Plan (Slow Wind SOOP) was developed to utilise the extensive suite of remote sensing and in situ instruments on board the ESA/NASA Solar Orbiter mission to answer significant outstanding questions regarding the origin and formation of the slow solar wind. The Slow Wind SOOP was designed to link remote sensing and in situ measurements of slow w…
▽ More
The Slow Solar Wind Connection Solar Orbiter Observing Plan (Slow Wind SOOP) was developed to utilise the extensive suite of remote sensing and in situ instruments on board the ESA/NASA Solar Orbiter mission to answer significant outstanding questions regarding the origin and formation of the slow solar wind. The Slow Wind SOOP was designed to link remote sensing and in situ measurements of slow wind originating at open-closed field boundaries. The SOOP ran just prior to Solar Orbiter's first close perihelion passage during two remote sensing windows (RSW1 and RSW2) between 2022 March 3-6 and 2022 March 17-22, while Solar Orbiter was at a heliocentric distance of 0.55-0.51 and 0.38-0.34 au from the Sun, respectively. Coordinated observation campaigns were also conducted by Hinode and IRIS. The magnetic connectivity tool was used, along with low latency in situ data, and full-disk remote sensing observations, to guide the target pointing of Solar Orbiter. Solar Orbiter targeted an active region complex during RSW1, the boundary of a coronal hole, and the periphery of a decayed active region during RSW2. Post-observation analysis using the magnetic connectivity tool along with in situ measurements from MAG and SWA/PAS, show that slow solar wind, with velocities between 210 and 600 km/s, arrived at the spacecraft originating from two out of the three of the target regions. The Slow Wind SOOP, despite presenting many challenges, was very successful, providing a blueprint for planning future observation campaigns that rely on the magnetic connectivity of Solar Orbiter.
△ Less
Submitted 20 April, 2023; v1 submitted 19 April, 2023;
originally announced April 2023.
-
SPICE PSF Correction: General Framework and Capability Demonstration
Authors:
Joseph E. Plowman,
Frédéric Auchère,
Regina Aznar Cuadrado,
Andrzej Fludra,
Terje Fredvik,
Donald M. Hassler,
Sudip Mandal,
Hardi Peter
Abstract:
We present a new method of removing PSF artifacts and improving the resolution of multidimensional data sources including imagers and spectrographs. Rather than deconvolution, which is translationally invariant, this method is based on sparse matrix solvers. This allows it to be applied to spatially varying PSFs and also to combining observations from instruments with radically different spatial,…
▽ More
We present a new method of removing PSF artifacts and improving the resolution of multidimensional data sources including imagers and spectrographs. Rather than deconvolution, which is translationally invariant, this method is based on sparse matrix solvers. This allows it to be applied to spatially varying PSFs and also to combining observations from instruments with radically different spatial, spectral, or thermal response functions (e.g., SDO/AIA and RHESSI). It was developed to correct PSF artifacts in Solar Orbiter SPICE, so the motivation, presentation of the method, and the results revolve around that application. However, it can also be used as a more robust (e.g., WRT a varying PSFs) alternative to deconvolution of 2D image data and similar problems, and is relevant to more general linear inversion problems.
△ Less
Submitted 2 December, 2022; v1 submitted 29 November, 2022;
originally announced November 2022.
-
Plasma composition measurements in an active region from Solar Orbiter/SPICE and Hinode/EIS
Authors:
David H. Brooks,
Miho Janvier,
Deborah Baker,
Harry P. Warren,
Frédéric Auchère,
Mats Carlsson,
Andrzej Fludra,
Don Hassler,
Hardi Peter,
Daniel Müller,
David R. Williams,
Regina Aznar Cuadrado,
Krzysztof Barczynski,
Eric Buchlin,
Martin Caldwell,
Terje Fredvik,
Alessandra Giunta,
Tim Grundy,
Steve Guest,
Margit Haberreiter,
Louise Harra,
Sarah Leeks,
Susanna Parenti,
Gabriel Pelouze,
Joseph Plowman
, et al. (6 additional authors not shown)
Abstract:
A key goal of the Solar Orbiter mission is to connect elemental abundance measurements of the solar wind enveloping the spacecraft with EUV spectroscopic observations of their solar sources, but this is not an easy exercise. Observations from previous missions have revealed a highly complex picture of spatial and temporal variations of elemental abundances in the solar corona. We have used coordin…
▽ More
A key goal of the Solar Orbiter mission is to connect elemental abundance measurements of the solar wind enveloping the spacecraft with EUV spectroscopic observations of their solar sources, but this is not an easy exercise. Observations from previous missions have revealed a highly complex picture of spatial and temporal variations of elemental abundances in the solar corona. We have used coordinated observations from Hinode and Solar Orbiter to attempt new abundance measurements with the SPICE (Spectral Imaging of the Coronal Environment) instrument, and benchmark them against standard analyses from EIS (EUV Imaging Spectrometer). We use observations of several solar features in AR 12781 taken from an Earth-facing view by EIS on 2020 November 10, and SPICE data obtained one week later on 2020 November 17; when the AR had rotated into the Solar Orbiter field-of-view. We identify a range of spectral lines that are useful for determining the transition region and low coronal temperature structure with SPICE, and demonstrate that SPICE measurements are able to differentiate between photospheric and coronal Mg/Ne abundances. The combination of SPICE and EIS is able to establish the atmospheric composition structure of a fan loop/outflow area at the active region edge. We also discuss the problem of resolving the degree of elemental fractionation with SPICE, which is more challenging without further constraints on the temperature structure, and comment on what that can tell us about the sources of the solar wind and solar energetic particles.
△ Less
Submitted 17 October, 2022;
originally announced October 2022.
-
Validation & Testing of the CROBAR 3D Coronal Reconstruction Method with a MURaM simulation
Authors:
Joseph Plowman
Abstract:
I report on validation and testing of a novel 3D reconstruction method than can obtain coronal plasma properties from a single snapshot perspective. I first reported on the method in 2021, and I have since named it the Coronal Reconstruction Onto B-Aligned Regions, or 'CROBAR', method. The testing was carried out with a cube from a MURaM 3D MHD simulation, which affords a coronal-like 'ground trut…
▽ More
I report on validation and testing of a novel 3D reconstruction method than can obtain coronal plasma properties from a single snapshot perspective. I first reported on the method in 2021, and I have since named it the Coronal Reconstruction Onto B-Aligned Regions, or 'CROBAR', method. The testing was carried out with a cube from a MURaM 3D MHD simulation, which affords a coronal-like 'ground truth' against which the reconstruction method can be applied and compared. I find that the method does quite well, recovering the 'coronal veil'-like features recently reported from the MURaM simulations, and allaying concerns that these features would thwart recovery of valid 3D coronal structure from a limited number of perspectives. I also find that a second perspective at between $\sim 45$ and 90 degrees, does significantly improve the reconstructions. Two distinct channels with Soft X-Ray like temperature response (peaking above 5 MK) would suffice for CROBAR's optically thin observables; barring that, a suite of AIA-like EUV passbands, with good coverage of the 3-8 MK temperature range.
△ Less
Submitted 5 September, 2022;
originally announced September 2022.
-
Three-dimensional Reconstruction of Coronal Plasma Properties from a Single Perspective
Authors:
Joseph Plowman
Abstract:
Much of our understanding of the state of coronal plasmas comes from observations that are optically thin. This means that light travels freely through the corona without being materially affected by it, which allows it to be easily seen through, but also results in a line-of-sight degeneracy which has previously thwarted attempts to recover the three-dimensional structure of the coronal plasma. H…
▽ More
Much of our understanding of the state of coronal plasmas comes from observations that are optically thin. This means that light travels freely through the corona without being materially affected by it, which allows it to be easily seen through, but also results in a line-of-sight degeneracy which has previously thwarted attempts to recover the three-dimensional structure of the coronal plasma. However, although the corona is disorganized in the line-of-sight direction, it is highly organized in the field-aligned direction. This paper demonstrates how to exploit this organization to resolve the line-of-sight degeneracy in the plasma properties using a suitable magnetic field structure. A preliminary investigation with a potential field is shown, finding a solution which clearly resembles the real solar data, even with a single perspective. The results indicate that there is ample information in the resulting residuals that can be used to refine the magnetic field structure, allowing, for the first time, the optically thin plasma observations to speak directly to the magnetic field extrapolations.
△ Less
Submitted 2 March, 2021;
originally announced March 2021.
-
Three-Dimensional Reconstructions of Coronal Wave Surfaces Using a New Mask-Fitting Method
Authors:
Li Feng,
Lei Lu,
Bernd Inhester,
Joseph Plowman,
Beili Ying,
Marilena Mierla,
Matthew J. West,
Weiqun Gan
Abstract:
Coronal waves are large-scale disturbances often driven by coronal mass ejections (CMEs). We investigate a spectacular wave event on 7 March 2012, which is associated with an X5.4 flare (SOL2012-03-07). By using a running center-median (RCM) filtering method for the detection of temporal variations in extreme ultraviolet (EUV) images, we enhance the EUV disturbance observed by the Atmospheric Imag…
▽ More
Coronal waves are large-scale disturbances often driven by coronal mass ejections (CMEs). We investigate a spectacular wave event on 7 March 2012, which is associated with an X5.4 flare (SOL2012-03-07). By using a running center-median (RCM) filtering method for the detection of temporal variations in extreme ultraviolet (EUV) images, we enhance the EUV disturbance observed by the Atmospheric Imaging Assembly (AIA) onboard the Solar Dynamics Observatory (SDO) and the Sun Watcher using Active Pixel System detector and Image Processing (SWAP) onboard the PRoject for Onboard Autonomy 2 (PROBA2). In coronagraph images, a halo front is observed to be the upper counterpart of the EUV disturbance. Based on the EUV and coronagraph images observed from three different perspectives, we have made three-dimensional (3D) reconstructions of the wave surfaces using a new mask-fitting method. The reconstructions are compared with those obtained from forward-fitting methods. We show that the mask fitting method can reflect the inhomogeneous coronal medium by capturing the concave shape of the shock wave front. Subsequently, we trace the developing concave structure and derive the deprojected wave kinematics. The speed of the 3D-wave nose increases from a low value below a few hundred $\mathrm{km\,s^{-1}}$ to a maximum value of about 3800 $\mathrm{km\,s^{-1}}$, and then slowly decreases afterwards. The concave structure starts to decelerate earlier and has significantly lower speeds than those of the wave nose. We also find that the 3D-wave in the extended corona has a much higher speed than the speed of EUV disturbances across the solar disk.
△ Less
Submitted 22 September, 2020;
originally announced September 2020.
-
A Fast, Simple, Robust Algorithm for Coronal Temperature Reconstruction
Authors:
Joseph Plowman,
Amir Caspi
Abstract:
We describe a new algorithm for reconstruction of Differential Emission Measures (DEMs) in the solar corona. Although a number of such algorithms currently exist, they can have difficulty converging for some cases, and can be complex, slow, or idiosyncratic in their output (i.e., their inversions can have features that are a result of the inversion code and instrument response, not of the solar so…
▽ More
We describe a new algorithm for reconstruction of Differential Emission Measures (DEMs) in the solar corona. Although a number of such algorithms currently exist, they can have difficulty converging for some cases, and can be complex, slow, or idiosyncratic in their output (i.e., their inversions can have features that are a result of the inversion code and instrument response, not of the solar source); we will document some of these issues in this paper. The new algorithm described here significantly reduces these drawbacks and is particularly notable for its simplicity; it is reproduced here, in full, on a single page. After we describe the algorithm, we compare its performance and fidelity with some prevalent methods. Although presented here for extreme ultraviolet (EUV) data, the algorithm is robust and extensible to any other wavelengths (e.g., X-rays) where the DEM treatment is valid.
△ Less
Submitted 11 June, 2020;
originally announced June 2020.
-
Calibrating GONG Magnetograms with End-to-end Instrument Simulation II: Theory of Calibration
Authors:
Joseph Plowman,
Thomas Berger
Abstract:
This is the second of three papers describing an `absolute' calibration of the GONG magnetograph using an end-to-end simulation of its measurement process. In the first paper, we described the GONG instrument and our `end-to-end' simulation of its measurement process. In this paper, we consider the theory of calibration, and magnetograph comparison in general, identifying some of the significant i…
▽ More
This is the second of three papers describing an `absolute' calibration of the GONG magnetograph using an end-to-end simulation of its measurement process. In the first paper, we described the GONG instrument and our `end-to-end' simulation of its measurement process. In this paper, we consider the theory of calibration, and magnetograph comparison in general, identifying some of the significant issues and pitfalls. The calibration of a magnetograph is a function of whether or not it preserves flux, independent of its spatial resolution. However, we find that the one-dimensional comparison methods most often used for magnetograph calibration and comparison will show dramatic differences between two magnetograms with differing spatial resolution, even if they both preserve flux. Some of the apparent disagreement between magnetograms found in the literature are likely a result of these instrumental resolution differences rather than any intrinsic calibration differences. To avoid them, spatial resolution must be carefully matched prior to comparing magnetograms or making calibration curves. In the third paper, we apply the lessons learned here to absolute calibration of GONG using our `end-to-end' measurement simulation.
△ Less
Submitted 6 February, 2020;
originally announced February 2020.
-
Calibrating GONG Magnetograms with End-to-end Instrument Simulation I: Background, the GONG Instrument, and End-to-end Simulation
Authors:
Joseph Plowman,
Thomas Berger
Abstract:
This is the first of three papers describing an `absolute' calibration of the GONG magnetograph using an end-to-end simulation of its measurement process. The input to this simulation is a MURaM 3D MHD photospheric simulation and the output is the corresponding set of simulated data numbers which would be recorded by the GONG detectors. These simulated data numbers are then used to produce `synthe…
▽ More
This is the first of three papers describing an `absolute' calibration of the GONG magnetograph using an end-to-end simulation of its measurement process. The input to this simulation is a MURaM 3D MHD photospheric simulation and the output is the corresponding set of simulated data numbers which would be recorded by the GONG detectors. These simulated data numbers are then used to produce `synthetic magnetograms' which can be compared with the simulation inputs. This paper describes the GONG instrument, the MURaM datacube, our instrument simulator, and calculation of synthetic magnetograms, setting the stage for the subsequent two papers. These will first lay groundwork for calibration (and magnetogram comparison in general), then apply them to calibration of GONG using the simulation results.
△ Less
Submitted 6 February, 2020;
originally announced February 2020.
-
Calibrating GONG Magnetograms with End-to-end Instrument Simulation III: Comparison, Calibration, and Results
Authors:
Joseph Plowman,
Thomas Berger
Abstract:
This is the last of three papers describing an `absolute' calibration of the GONG magnetograph using and end-to-end simulation of its measurement process. The simulation begins with a MURaM 3D MHD datacube and ends with a `synthetic magnetogram' of the corresponding magnetic field values as they would be observed by GONG. We determine a calibration by comparing the synthetic magnetic field measure…
▽ More
This is the last of three papers describing an `absolute' calibration of the GONG magnetograph using and end-to-end simulation of its measurement process. The simulation begins with a MURaM 3D MHD datacube and ends with a `synthetic magnetogram' of the corresponding magnetic field values as they would be observed by GONG. We determine a calibration by comparing the synthetic magnetic field measurements with the MURaM magnetic field values that produced them. The previous two papers have described the GONG measurement process (both instrument and data processing), our simulation of it, and the theory of magnetogram comparison and calibration. In this paper, we address some final points on calibration, combine all of this work into a set of calibration curves, and consider the results. We also review the results of the previous two papers for locality of reference. Our calibration indicates that GONG magnetograms underestimate weak flux by a factor of over 2 near disk center, but that factor decreases to about 1 as the line-of-sight approaches the limb. A preliminary investigation of the generalizability of these results suggests other instruments will be affected in a similar way. We also find that some differences in previous magnetograph comparisons are artifacts of instrumental resolution which do not reflect an intrinsic calibration difference, and the measurements are more similar than sometimes thought. These results are directly applicable to question of solar wind prediction model accuracies, particularly in the search for the cause of the common discrepancy between predicted solar wind magnetic flux at 1 AU and values measured in situ by current satellite missions.
△ Less
Submitted 6 February, 2020;
originally announced February 2020.
-
A Center-Median Filtering Method for Detection of Temporal Variation in Coronal Images
Authors:
Joseph Plowman
Abstract:
Events in the solar corona are often widely separated in their timescales, which can allow them to be identified when they would otherwise be confused with emission from other sources in the corona. Methods for cleanly separating such events based on their timescales are thus desirable for research in the field. This paper develops a technique for identifying time-varying signals in solar coronal…
▽ More
Events in the solar corona are often widely separated in their timescales, which can allow them to be identified when they would otherwise be confused with emission from other sources in the corona. Methods for cleanly separating such events based on their timescales are thus desirable for research in the field. This paper develops a technique for identifying time-varying signals in solar coronal image sequences which is based on a per-pixel running median filter and an understanding of photon-counting statistics. Example applications to 'EIT Waves' and small-scale dynamics are shown, both using data from the 193 Angstrom channel on AIA. The technique is found to discriminate EIT Waves more cleanly than the running and base difference techniques most commonly used. It is also demonstrated that there is more signal in the data than is commonly appreciated, finding that the waves can be traced to the edge of the AIA field of view when the data are rebinned to increase the signal-to-noise ratio.
△ Less
Submitted 29 January, 2016; v1 submitted 13 November, 2015;
originally announced November 2015.
-
Fast Differential Emission Measure Inversion of Solar Coronal Data
Authors:
Joseph Plowman,
Charles Kankelborg,
Petrus Martens
Abstract:
We present a fast method for reconstructing Differential Emission Measures (DEMs) using solar coronal data. On average, the method computes over 1000 DEMs per second for a sample active region observed by the Atmospheric Imaging Assembly (AIA) on the Solar Dynamics Observatory (SDO), and achieves reduced chi-squared of order unity with no negative emission in all but a few test cases. The high per…
▽ More
We present a fast method for reconstructing Differential Emission Measures (DEMs) using solar coronal data. On average, the method computes over 1000 DEMs per second for a sample active region observed by the Atmospheric Imaging Assembly (AIA) on the Solar Dynamics Observatory (SDO), and achieves reduced chi-squared of order unity with no negative emission in all but a few test cases. The high performance of this method is especially relevant in the context of AIA, which images of order one million solar pixels per second. This paper describes the method, analyzes its fidelity, compares its performance and results with other DEM methods, and applies it to an active region and loop observed by AIA and by the Extreme-ultraviolet Imaging Spectrometer (EIS) on Hinode.
△ Less
Submitted 22 October, 2012; v1 submitted 27 April, 2012;
originally announced April 2012.
-
Constraining the Black Hole Mass Spectrum with LISA Observations II: Direct comparison of detailed models
Authors:
Joseph E. Plowman,
Ronald W. Hellings,
Sachiko Tsuruta
Abstract:
A number of scenarios have been proposed for the origin of the supermassive black holes (SMBHs) that are found in the centres of most galaxies. Many such scenarios predict a high-redshift population of massive black holes (MBHs), with masses in the range 100 to 100000 times that of the Sun. When the Laser Interferometer Space Antenna (LISA) is finally operational, it is likely that it will detect…
▽ More
A number of scenarios have been proposed for the origin of the supermassive black holes (SMBHs) that are found in the centres of most galaxies. Many such scenarios predict a high-redshift population of massive black holes (MBHs), with masses in the range 100 to 100000 times that of the Sun. When the Laser Interferometer Space Antenna (LISA) is finally operational, it is likely that it will detect on the order of 100 of these MBH binaries as they merge. The differences between proposed population models produce appreciable effects in the portion of the population which is detectable by LISA, so it is likely that the LISA observations will allow us to place constraints on them. However, gravitational wave detectors such as LISA will not be able to detect all such mergers nor assign precise black hole parameters to the merger, due to weak gravitational wave signal strengths. This paper explores LISA's ability to distinguish between several MBH population models. In this way, we go beyond predicting a LISA observed population and consider the extent to which LISA observations could inform astrophysical modellers. The errors in LISA parameter estimation are applied with a direct method which generates random sample parameters for each source in a population realisation. We consider how the distinguishability varies depending on the choice of source parameters (1 or 2 parameters chosen from masses, redshift or spins) used to characterise the model distributions, with confidence levels determined by 1 and 2-dimensional tests based on the Kolmogorov-Smirnov test.
△ Less
Submitted 3 September, 2010;
originally announced September 2010.
-
Coronal Loop Expansion Properties Explained Using Separators
Authors:
Joseph E. Plowman,
Charles C. Kankelborg,
Dana W. Longcope
Abstract:
One puzzling observed property of coronal loops is that they are of roughly constant thickness along their length. Various studies have found no consistent pattern of width variation along the length of loops observed by TRACE and SOHO. This is at odds with expectations of magnetic flux tube expansion properties, which suggests that loops are widest at their tops, and significantly narrower at t…
▽ More
One puzzling observed property of coronal loops is that they are of roughly constant thickness along their length. Various studies have found no consistent pattern of width variation along the length of loops observed by TRACE and SOHO. This is at odds with expectations of magnetic flux tube expansion properties, which suggests that loops are widest at their tops, and significantly narrower at their footpoints. Coronal loops correspond to areas of the solar corona which have been preferentially heated by some process, so this observed property might be connected to the mechanisms that heat the corona. One means of energy deposition is magnetic reconnection, which occurs along field lines called separators. These field lines begin and end on magnetic null points, and loops forming near them can therefore be relatively wide at their bases. Thus, coronal energization by magnetic reconnection may replicate the puzzling expansion properties observed in coronal loops. We present results of a Monte Carlo survey of separator field line expansion properties, comparing them to the observed properties of coronal loops.
△ Less
Submitted 19 March, 2009;
originally announced March 2009.
-
Constraining the Black Hole Mass Spectrum with Gravitational Wave Observations I: The Error Kernel
Authors:
Joseph E. Plowman,
Daniel C. Jacobs,
Ronald W. Hellings,
Shane L. Larson,
Sachiko Tsuruta
Abstract:
Many scenarios have been proposed for the origin of the supermassive black holes (SMBHs) that are found in the centres of most galaxies. Many of these formation scenarios predict a high-redshift population of intermediate-mass black holes (IMBHs), with masses in the range 100 to 100000 times that of the Sun. A powerful way to observe these IMBHs is via gravitational waves the black holes emit as…
▽ More
Many scenarios have been proposed for the origin of the supermassive black holes (SMBHs) that are found in the centres of most galaxies. Many of these formation scenarios predict a high-redshift population of intermediate-mass black holes (IMBHs), with masses in the range 100 to 100000 times that of the Sun. A powerful way to observe these IMBHs is via gravitational waves the black holes emit as they merge. The statistics of the observed black hole population should, in principle, allow us to discriminate between competing astrophysical scenarios for the origin and formation of SMBHs. However, gravitational wave detectors such as LISA will not be able to detect all such mergers nor assign precise black hole parameters to the merger, due to weak gravitational wave signal strengths. In order to use LISA observations to infer the statistics of the underlying population, these errors must be taken into account. We describe here a method for folding the LISA gravitational wave parameter error estimates into an `error kernel' designed for use at the population model level. The effects of this error function are demonstrated by applying it to several recent models of black hole mergers, and some tentative conclusions are made about LISA's ability to test scenarios of the origin and formation of supermassive black holes.
△ Less
Submitted 15 October, 2009; v1 submitted 11 March, 2009;
originally announced March 2009.
