Showing 1–11 of 11 results for author: Pertenais, M

PLATO's signal and noise budget

Authors: Anko Börner, Carsten Paproth, Juan Cabrera, Martin Pertenais, Heike Rauer, J. Miguel Mas-Hesse, Isabella Pagano, Jose Lorenzo Alvarez, Anders Erikson, Denis Grießbach, Yves Levillain, Demetrio Magrin, Valery Mogulsky, Sami-Matias Niemi, Thibaut Prod'homme, Sara Regibo, Joris De Ridder, Steve Rockstein, Reza Samadi, Dimitri Serrano-Velarde, Alan Smith, Peter Verhoeve, Dave Walton

Abstract: ESA's PLATO mission aims the detection and characterization of terrestrial planets around solar-type stars as well as the study of host star properties. The noise-to-signal ratio (NSR) is the main performance parameter of the PLATO instrument, which consists of 24 Normal Cameras and 2 Fast Cameras. In order to justify, verify and breakdown NSR-relevant requirements the software simulator PINE was… ▽ More ESA's PLATO mission aims the detection and characterization of terrestrial planets around solar-type stars as well as the study of host star properties. The noise-to-signal ratio (NSR) is the main performance parameter of the PLATO instrument, which consists of 24 Normal Cameras and 2 Fast Cameras. In order to justify, verify and breakdown NSR-relevant requirements the software simulator PINE was developed. PINE models the signal pathway from a target star to the digital output of a camera based on physical models and considers the major noise contributors. In this paper, the simulator's coarse mode is introduced which allows fast performance analyses on instrument level. The added value of PINE is illustrated by exemplary applications. △ Less

Submitted 17 June, 2024; originally announced June 2024.

Comments: 17 pages, 8 figures, 3 tables

The PLATO Mission

Authors: Heike Rauer, Conny Aerts, Juan Cabrera, Magali Deleuil, Anders Erikson, Laurent Gizon, Mariejo Goupil, Ana Heras, Jose Lorenzo-Alvarez, Filippo Marliani, Cesar Martin-Garcia, J. Miguel Mas-Hesse, Laurence O'Rourke, Hugh Osborn, Isabella Pagano, Giampaolo Piotto, Don Pollacco, Roberto Ragazzoni, Gavin Ramsay, Stéphane Udry, Thierry Appourchaux, Willy Benz, Alexis Brandeker, Manuel Güdel, Eduardo Janot-Pacheco , et al. (801 additional authors not shown)

Abstract: PLATO (PLAnetary Transits and Oscillations of stars) is ESA's M3 mission designed to detect and characterise extrasolar planets and perform asteroseismic monitoring of a large number of stars. PLATO will detect small planets (down to <2 R_(Earth)) around bright stars (<11 mag), including terrestrial planets in the habitable zone of solar-like stars. With the complement of radial velocity observati… ▽ More PLATO (PLAnetary Transits and Oscillations of stars) is ESA's M3 mission designed to detect and characterise extrasolar planets and perform asteroseismic monitoring of a large number of stars. PLATO will detect small planets (down to <2 R_(Earth)) around bright stars (<11 mag), including terrestrial planets in the habitable zone of solar-like stars. With the complement of radial velocity observations from the ground, planets will be characterised for their radius, mass, and age with high accuracy (5 %, 10 %, 10 % for an Earth-Sun combination respectively). PLATO will provide us with a large-scale catalogue of well-characterised small planets up to intermediate orbital periods, relevant for a meaningful comparison to planet formation theories and to better understand planet evolution. It will make possible comparative exoplanetology to place our Solar System planets in a broader context. In parallel, PLATO will study (host) stars using asteroseismology, allowing us to determine the stellar properties with high accuracy, substantially enhancing our knowledge of stellar structure and evolution. The payload instrument consists of 26 cameras with 12cm aperture each. For at least four years, the mission will perform high-precision photometric measurements. Here we review the science objectives, present PLATO's target samples and fields, provide an overview of expected core science performance as well as a description of the instrument and the mission profile at the beginning of the serial production of the flight cameras. PLATO is scheduled for a launch date end 2026. This overview therefore provides a summary of the mission to the community in preparation of the upcoming operational phases. △ Less

Submitted 8 June, 2024; originally announced June 2024.

PlatoSim: An end-to-end PLATO camera simulator for modelling high-precision space-based photometry

Authors: N. Jannsen, J. De Ridder, D. Seynaeve, S. Regibo, R. Huygen, P. Royer, C. Paproth, D. Grießbach, R. Samadi, D. R. Reese, M. Pertenais, E. Grolleau, R. Heller, S. M. Niemi, J. Cabrera, A. Börner, S. Aigrain, J. McCormac, P. Verhoeve, P. Astier, N. Kutrowski, B. Vandenbussche, A. Tkachenko, C. Aerts

Abstract: PLAnetary Transits and Oscillations of stars (PLATO) is the ESA M3 space mission dedicated to detect and characterise transiting exoplanets including information from the asteroseismic properties of their stellar hosts. The uninterrupted and high-precision photometry provided by space-borne instruments such as PLATO require long preparatory phases. An exhaustive list of tests are paramount to desi… ▽ More PLAnetary Transits and Oscillations of stars (PLATO) is the ESA M3 space mission dedicated to detect and characterise transiting exoplanets including information from the asteroseismic properties of their stellar hosts. The uninterrupted and high-precision photometry provided by space-borne instruments such as PLATO require long preparatory phases. An exhaustive list of tests are paramount to design a mission that meets the performance requirements, and as such, simulations are an indispensable tool in the mission preparation. To accommodate PLATO's need of versatile simulations prior to mission launch - that at the same time describe accurately the innovative but complex multi-telescope design - we here present the end-to-end PLATO simulator specifically developed for the purpose, namely PlatoSim. We show step-by-step the algorithms embedded into the software architecture of PlatoSim that allow the user to simulate photometric time series of CCD images and light curves in accordance to the expected observations of PLATO. In the context of the PLATO payload, a general formalism of modelling, end-to-end, incoming photons from the sky to the final measurement in digital units is discussed. We show the strong predictive power of PlatoSim through its diverse applicability and contribution to numerous working groups within the PLATO Mission Consortium. This involves the on-going mechanical integration and alignment, performance studies of the payload, the pipeline development and assessments of the scientific goals. PlatoSim is a state-of-the-art simulator that is able to produce the expected photometric observations of PLATO to a high level of accuracy. We demonstrate that PlatoSim is a key software tool for the PLATO mission in the preparatory phases until mission launch and prospectively beyond. △ Less

Submitted 8 May, 2024; v1 submitted 10 October, 2023; originally announced October 2023.

Comments: 30 pages, 22 figures

Journal ref: A&A 681, A18 (2024)

The all-sky PLATO input catalogue

Authors: M. Montalto, G. Piotto, P. M. Marrese, V. Nascimbeni, L. Prisinzano, V. Granata, S. Marinoni, S. Desidera, S. Ortolani, C. Aerts, E. Alei, G. Altavilla, S. Benatti, A. Börner, J. Cabrera, R. Claudi, M. Deleuil, M. Fabrizio, L. Gizon, M. J. Goupil, A. M. Heras, D. Magrin, L. Malavolta, J. M. Mas-Hesse, I. Pagano , et al. (7 additional authors not shown)

Abstract: Context. The ESA PLAnetary Transits and Oscillations of stars (PLATO) mission will search for terrestrial planets in the habitable zone of solar-type stars. Because of telemetry limitations, PLATO targets need to be pre-selected. Aims. In this paper, we present an all sky catalogue that will be fundamental to selecting the best PLATO fields and the most promising target stars, deriving their basic… ▽ More Context. The ESA PLAnetary Transits and Oscillations of stars (PLATO) mission will search for terrestrial planets in the habitable zone of solar-type stars. Because of telemetry limitations, PLATO targets need to be pre-selected. Aims. In this paper, we present an all sky catalogue that will be fundamental to selecting the best PLATO fields and the most promising target stars, deriving their basic parameters, analysing the instrumental performances, and then planing and optimising follow-up observations. This catalogue also represents a valuable resource for the general definition of stellar samples optimised for the search of transiting planets. Methods. We used Gaia Data Release 2 (DR2) astrometry and photometry and 3D maps of the local interstellar medium to isolate FGK (V$\leq$13) and M (V$\leq$16) dwarfs and subgiant stars. Results. We present the first public release of the all-sky PLATO Input Catalogue (asPIC1.1) containing a total of 2 675 539 stars including 2 378 177 FGK dwarfs and subgiants and 297 362 M dwarfs. The median distance in our sample is 428 pc for FGK stars and 146 pc for M dwarfs, respectively. We derived the reddening of our targets and developed an algorithm to estimate stellar fundamental parameters (Teff, radius, mass) from astrometric and photometric measurements. Conclusions. We show that the overall (internal+external) uncertainties on the stellar parameter determined in the present study are $\sim$230 K (4%) for the effective temperatures, $\sim$0.1 R$_{\odot}$ (9%) for the stellar radii, and $\sim$0.1 M$_{\odot}$ (11%) for the stellar mass. We release a special target list containing all known planet hosts cross-matched with our catalogue. △ Less

Submitted 31 August, 2021; originally announced August 2021.

Comments: Accepted for publication in Astronomy & Astrophysics

Journal ref: A&A 653, A98 (2021)

VUV test of a new polarimeter for spectropolarimetric measurements on board space missions

Authors: Maelle Le Gal, Martin Pertenais, Arturo Lopez Ariste, Coralie Neiner, Norbert Champion, Youssef Younes, Jean-Michel Reess

Abstract: High-resolution spectropolarimetry is a useful astronomical technique, in particular to study stellar magnetic fields. It has been extensively used in the past but mostly in the visible range. Space missions equipped with high-resolution spectropolarimeters working in the ultra-violet (UV) are now being studied. We propose a concept of a polarimeter working with temporal modulation and allowing to… ▽ More High-resolution spectropolarimetry is a useful astronomical technique, in particular to study stellar magnetic fields. It has been extensively used in the past but mostly in the visible range. Space missions equipped with high-resolution spectropolarimeters working in the ultra-violet (UV) are now being studied. We propose a concept of a polarimeter working with temporal modulation and allowing to perform Stokes IQUV measurements over the full UV + Visible range. The purpose of this article is to describe the polarimeter concept, two prototypes and the bench developed to perform on ground testing to establish the performances of this new polarimeter. △ Less

Submitted 26 July, 2019; originally announced July 2019.

In-flight photometry extraction of PLATO targets: Optimal apertures for detecting extrasolar planets

Authors: V. Marchiori, R. Samadi, F. Fialho, C. Paproth, A. Santerne, M. Pertenais, A. Börner, J. Cabrera, A. Monsky, N. Kutrowski

Abstract: The ESA PLATO space mission is devoted to unveiling and characterizing new extrasolar planets and their host stars. This mission will encompass a very large field of view, granting it the potential to survey up to one million stars depending on the final observation strategy. The telemetry budget of the spacecraft cannot handle transmitting individual images for such a huge stellar sample at the r… ▽ More The ESA PLATO space mission is devoted to unveiling and characterizing new extrasolar planets and their host stars. This mission will encompass a very large field of view, granting it the potential to survey up to one million stars depending on the final observation strategy. The telemetry budget of the spacecraft cannot handle transmitting individual images for such a huge stellar sample at the right cadence, so the development of an appropriate strategy to perform on-board data reduction is mandatory. We employ aperture photometry to produce stellar light curves in flight. Our aim is thus to find the mask model that optimizes the scientific performance of the reduced data. We considered three distinct aperture models: binary mask, weighted Gaussian mask, and weighted gradient mask giving lowest noise-to-signal ratio, computed through a novel direct method. An innovative criterion was adopted for choosing between different mask models. We designated as optimal the model providing the best compromise between sensitivity to detect true and false planet transits. We determined the optimal model based on simulated noise-to-signal ratio and frequency of threshold crossing events. Our results show that, although the binary mask statistically presents a few percent higher noise-to-signal ratio compared to weighted masks, both strategies have very similar efficiency in detecting legitimate planet transits. When it comes to avoiding spurious signals from contaminant stars however the binary mask statistically collects considerably less contaminant flux than weighted masks, thereby allowing the former to deliver up to $\sim$30\% less false transit signatures at $7.1σ$. Our proposed approach for choosing apertures has been proven to be decisive for the determination of a mask model capable to provide near maximum planet yield and substantially reduced occurrence of false positives. △ Less

Submitted 3 June, 2019; originally announced June 2019.

Comments: 20 pages, 22 figures, Astronomy & Astrophysics (accepted)

Journal ref: A&A 627, A71 (2019)

The PLATO Solar-like Light-curve Simulator: A tool to generate realistic stellar light-curves with instrumental effects representative of the PLATO mission

Authors: R. Samadi, A. Deru, D. Reese, V. Marchiori, E. Grolleau, J. J. Green, M. Pertenais, Y. Lebreton, S. Deheuvels, B. Mosser, K. Belkacem, A. Borner, A. M. S. Smith

Abstract: The preparation of science objectives of the ESA's PLATO space mission will require the implementation of hare-and-hound exercises relying on the massive generation of representative simulated light-curves. We developed a light-curve simulator named the PLATO Solar-like Light-curve Simulator (PSLS) in order to generate light-curves representative of typical PLATO targets, i.e. showing simultaneous… ▽ More The preparation of science objectives of the ESA's PLATO space mission will require the implementation of hare-and-hound exercises relying on the massive generation of representative simulated light-curves. We developed a light-curve simulator named the PLATO Solar-like Light-curve Simulator (PSLS) in order to generate light-curves representative of typical PLATO targets, i.e. showing simultaneously solar-like oscillations, stellar granulation, and magnetic activity. At the same time, PSLS also aims at mimicking in a realistic way the random noise and the systematic errors representative of the PLATO multi-telescope concept. To quantify the instrumental systematic errors, we performed a series of simulations at pixel level that include various relevant sources of perturbations expected for PLATO. From the simulated pixels, we extract the photometry as planned on-board. The simulated light-curves are then corrected for instrumental effects using the instrument Point Spread Functions reconstructed on the basis of a microscanning technique that will be operated during the in-flight calibration phases. These corrected light-curves are then fitted by a parametric model, which we incorporated in PSLS. We show that the instrumental systematic errors dominate the signal only at frequencies below 20muHz and are found to mainly depend on stellar magnitude and on the detector charge transfer inefficiency. To illustrate how realistic our simulator is, we compared its predictions with observations made by Kepler on three typical targets and found a good qualitative agreement with the observations. PSLS reproduces the main properties of expected PLATO light-curves. Its speed of execution and its inclusion of relevant stellar signals as well as sources of noises representative of the PLATO cameras make it an indispensable tool for the scientific preparation of the PLATO mission. △ Less

Submitted 23 March, 2019; v1 submitted 7 March, 2019; originally announced March 2019.

Comments: 19 pages, 16 figures, Astronomy & Astrophysics (in press)

Journal ref: A&A 624, A117 (2019)

Innovative static spectropolarimeter concept for wide spectral ranges: tolerancing study

Authors: Martin Pertenais, Coralie Neiner, Laurent Parès, Pascal Petit

Abstract: Developing an efficient and robust polarimeter for wide spectral ranges and space applications is a main issue in many projects. As part of the UVMag consortium created to develop UV facilities in space (e.g. the Arago mission proposed to ESA), we are studying an innovative concept of polarimeter that is robust, simple, and efficient on a wide spectral range. The idea, based on the article by Spar… ▽ More Developing an efficient and robust polarimeter for wide spectral ranges and space applications is a main issue in many projects. As part of the UVMag consortium created to develop UV facilities in space (e.g. the Arago mission proposed to ESA), we are studying an innovative concept of polarimeter that is robust, simple, and efficient on a wide spectral range. The idea, based on the article by Sparks et al. (2012), is to use polarization scramblers to create a spatial modulation of the polarization. Along the height of the wedges of the scramblers, the thickness of the birefringent material crossed by the light, and thus the retardance, vary continuously. This variation creates an intensity modulation of the light related to the entrance polarization state. Analyzing this modulation with a linear polarizer, and dispersing the light spectrally in the orthogonal spatial direction, enables the measurement of the full Stokes vector over the entire spectrum. This determination is performed with a single-shot measurement and without any moving parts in the system. After a quick introduction to the concept and optical design, this article presents the tolerancing study of the optical bench using this spectropolarimeter. The impact of different error sources, such as, birefringence uncertainty or decenter of the wedges, is investigated. △ Less

Submitted 2 September, 2015; originally announced September 2015.

Comments: 6 pages, Proceeding SPIE Optics and Photonics, August 2015

Static spectropolarimeter concept adapted to space conditions and wide spectrum constraints

Authors: Martin Pertenais, Coralie Neiner, Pernelle Bernardi, Jean-Michel Reess, Pascal Petit

Abstract: The issues related to moving elements in space and instruments working in broader wavelength ranges lead to a need for robust polarimeters, efficient on a wide spectral domain, and adapted to space conditions. As part of the UVMag consortium, created to develop spectropolarimetric UV facilities in space, such as the Arago mission project, we present an innovative concept of static spectropolarimet… ▽ More The issues related to moving elements in space and instruments working in broader wavelength ranges lead to a need for robust polarimeters, efficient on a wide spectral domain, and adapted to space conditions. As part of the UVMag consortium, created to develop spectropolarimetric UV facilities in space, such as the Arago mission project, we present an innovative concept of static spectropolarimetry. We studied a static and polychromatic method for spectropolarimetry, applicable to stellar physics. Instead of modulating the polarization information temporally, as usually done in spectropolarimeters, the modulation is performed in a spatial direction, orthogonal to the spectral one. Thanks to the proportionality between phase retardance imposed by a birefringent material and its thickness, birefringent wedges can be used to create this spatial modulation. The light is then spectrally cross-dispersed, and a full-Stokes determination of the polarization over the whole spectrum can be obtained with a single-shot measurement. The use of Magnesium Fluoride wedges, for example, could lead to a compact, static polarimeter working at wavelengths from 0.115 mm up to 7 mm. We present the theory and simulations of this concept, as well as laboratory validation and a practical application to Arago. △ Less

Submitted 24 July, 2015; originally announced July 2015.

Comments: Article accepted for publication in Applied Optics on 20 July 2015

Preliminary design of the full-Stokes UV and visible spectropolarimeter for UVMag/Arago

Authors: Martin Pertenais, Coralie Neiner, Laurent Pares, Pascal Petit, Frans Snik, Gerard van Harten

Abstract: The UVMag consortium proposed the space mission project Arago to ESA at its M4 call. It is dedicated to the study of the dynamic 3D environment of stars and planets. This space mission will be equipped with a high-resolution spectropolarimeter working from 119 to 888 nm. A preliminary optical design of the whole instrument has been prepared and is presented here. The design consists of the telesco… ▽ More The UVMag consortium proposed the space mission project Arago to ESA at its M4 call. It is dedicated to the study of the dynamic 3D environment of stars and planets. This space mission will be equipped with a high-resolution spectropolarimeter working from 119 to 888 nm. A preliminary optical design of the whole instrument has been prepared and is presented here. The design consists of the telescope, the instrument itself, and the focusing optics. Considering not only the scientific requirements, but also the cost and size constraints to fit a M-size mission, the telescope has a 1.3 m diameter primary mirror and is a classical Cassegrain-type telescope that allows a polarization-free focus. The polarimeter is placed at this Cassegrain focus. This is the key element of the mission and the most challenging to be designed. The main challenge lies in the huge spectral range offered by the instrument; the polarimeter has to deliver the full Stokes vector with a high precision from the FUV (119 nm) to the NIR (888 nm). The polarimeter module is then followed by a high-resolution echelle-spectrometer achieving a resolution of 35000 in the visible range and 25000 in the UV. The two channels are separated after the echelle grating, allowing a specific cross-dispersion and focusing optics for the UV and visible ranges. Considering the large field of view and the high numerical aperture, the focusing optic for both the UV and visible channels is a Three-Mirror-Anastigmat (TMA) telescope, in order to focus the various wavelengths and many orders onto the detectors. △ Less

Submitted 3 February, 2015; originally announced February 2015.

Comments: 6 pages, 6 figures, IAUS 305

UVMag: Space UV and visible spectropolarimetry

Authors: Martin Pertenais, Coralie Neiner, Laurent Pares, Pascal Petit, Frans Snik, Gerard van harten

Abstract: UVMag is a project of a space mission equipped with a high-resolution spectropolarimeter working in the UV and visible range. This M-size mission will be proposed to ESA at its M4 call. The main goal of UVMag is to measure the magnetic fields, winds and environment of all types of stars to reach a better understanding of stellar formation and evolution and of the impact of stellar environment on t… ▽ More UVMag is a project of a space mission equipped with a high-resolution spectropolarimeter working in the UV and visible range. This M-size mission will be proposed to ESA at its M4 call. The main goal of UVMag is to measure the magnetic fields, winds and environment of all types of stars to reach a better understanding of stellar formation and evolution and of the impact of stellar environment on the surrounding planets. The groundbreaking combination of UV and visible spectropolarimetric observations will allow the scientists to study the stellar surface and its environment simultaneously. The instrumental challenge for this mission is to design a high-resolution space spectropolarimeter measuring the full-Stokes vector of the observed star in a huge spectral domain from 117 nm to 870 nm. This spectral range is the main difficulty because of the dispersion of the optical elements and of birefringence issues in the FUV. As the instrument will be launched into space, the polarimetric module has to be robust and therefore use if possible only static elements. This article presents the different design possibilities for the polarimeter at this point of the project. △ Less

Submitted 23 July, 2014; v1 submitted 17 June, 2014; originally announced June 2014.

Comments: 9 pages, 4 figures, SPIE Conference Astronomical Telescopes + Instrumentation Montreal June 2014