-
Coronal Heating Rate in the Slow Solar Wind
Authors:
Daniele Telloni,
Marco Romoli,
Marco Velli,
Gary P. Zank,
Laxman Adhikari,
Cooper Downs,
Aleksandr Burtovoi,
Roberto Susino,
Daniele Spadaro,
Lingling Zhao,
Alessandro Liberatore,
Chen Shi,
Yara De Leo,
Lucia Abbo,
Federica Frassati,
Giovanna Jerse,
Federico Landini,
Gianalfredo Nicolini,
Maurizio Pancrazzi,
Giuliana Russano,
Clementina Sasso,
Vincenzo Andretta,
Vania Da Deppo,
Silvano Fineschi,
Catia Grimani
, et al. (37 additional authors not shown)
Abstract:
This Letter reports the first observational estimate of the heating rate in the slowly expanding solar corona. The analysis exploits the simultaneous remote and local observations of the same coronal plasma volume with the Solar Orbiter/Metis and the Parker Solar Probe instruments, respectively, and relies on the basic solar wind magnetohydrodynamic equations. As expected, energy losses are a mino…
▽ More
This Letter reports the first observational estimate of the heating rate in the slowly expanding solar corona. The analysis exploits the simultaneous remote and local observations of the same coronal plasma volume with the Solar Orbiter/Metis and the Parker Solar Probe instruments, respectively, and relies on the basic solar wind magnetohydrodynamic equations. As expected, energy losses are a minor fraction of the solar wind energy flux, since most of the energy dissipation that feeds the heating and acceleration of the coronal flow occurs much closer to the Sun than the heights probed in the present study, which range from 6.3 to 13.3 solar radii. The energy deposited to the supersonic wind is then used to explain the observed slight residual wind acceleration and to maintain the plasma in a non-adiabatic state. As derived in the Wentzel-Kramers-Brillouin limit, the present energy transfer rate estimates provide a lower limit, which can be very useful in refining the turbulence-based modeling of coronal heating and subsequent solar wind acceleration.
△ Less
Submitted 19 June, 2023;
originally announced June 2023.
-
FLYEYE family tree, from smart fast cameras to MezzoCielo
Authors:
Roberto Ragazzoni,
Silvio Di Rosa,
Carmelo Arcidiacono,
Marco Dima,
Demetrio Magrin,
Alain J. Corso,
Jacopo Farinato,
Maria Pelizzo,
Giovanni L. Santi,
Matteo Simioni,
Simone Zaggia
Abstract:
We developed game-changing concepts for meter(s) class very-wide-field telescopes, spanning three orders of magnitude of the covered field of view. Multiple cameras and monocentric systems: from the Smart Fast Cameras (with a quasi-monocentric aperture), through the FlyEye, toward a MezzoCielo concept (both with a truly monocentric aperture). MezzoCielo (or "half of the sky") is the last developed…
▽ More
We developed game-changing concepts for meter(s) class very-wide-field telescopes, spanning three orders of magnitude of the covered field of view. Multiple cameras and monocentric systems: from the Smart Fast Cameras (with a quasi-monocentric aperture), through the FlyEye, toward a MezzoCielo concept (both with a truly monocentric aperture). MezzoCielo (or "half of the sky") is the last developed concept for a new class of telescopes. Such a concept is based on a fully spherical optical surface filled with a low refractive index, and high transparency liquid surrounded by multiple identical cameras. MezzoCielo is capable to reach field of views in the range of ten to twenty thousand square degrees.
△ Less
Submitted 1 February, 2023;
originally announced February 2023.
-
Swarm of lightsail nanosatellites for Solar System exploration
Authors:
Giovanni Santi,
Alain J. Corso,
Denis Garoli,
Giuseppe Emanuele Lio,
Marco Manente,
Giulio Favaro,
Marco Bazzan,
Giampaolo Piotto,
Nicola Andriolli,
Lucanos Strambini,
Daniele Pavarin,
Leonardo Badia,
Remo Proietti Zaccaria,
Philip Lubin,
Roberto Ragazzoni,
Maria G. Pelizzo
Abstract:
This paper presents a study for the realization of a space mission which employs nanosatellites driven by an external laser source impinging on an optimized lightsail, as a valuable technology to launch swarms of spacecrafts into the Solar System. Nanosatellites propelled by laser can be useful for the heliosphere exploration and for planetary observation, if suitably equipped with sensors, or be…
▽ More
This paper presents a study for the realization of a space mission which employs nanosatellites driven by an external laser source impinging on an optimized lightsail, as a valuable technology to launch swarms of spacecrafts into the Solar System. Nanosatellites propelled by laser can be useful for the heliosphere exploration and for planetary observation, if suitably equipped with sensors, or be adopted for the establishment of network systems when placed into specific orbits. By varying the area-to-mass ratio (i.e., the ratio between the sail area and the payload weight) and the laser power, it is ossible to insert nanosatellites into different hyperbolic orbits with respect to Earth, thus reaching the target by means of controlled trajectories in a relatively short amount of time. A mission involving nanosatellites of the order of 1 kg of mass is envisioned, by describing all the on-board subsystems and satisfying all the requirements in term of power and mass budget. Particular attention is paid to the telecommunication subsystem, which must offer all the necessary functionalities. To fabricate the lightsail, the thin films technology has been considered, by verifying the sail thermal stability during the thrust phase. Moreover, the problem of mechanical stability of the lightsail has been tackled, showing that the distance between the ligthsail structure and the payload plays a pivotal role. Some potential applications of the proposed technology are discussed, such as the mapping of the heliospheric environment.
△ Less
Submitted 15 September, 2022; v1 submitted 23 August, 2022;
originally announced August 2022.
-
Investigating Mercury's Environment with the Two-Spacecraft BepiColombo Mission
Authors:
A. Milillo,
M. Fujimoto,
G. Murakami,
J. Benkhoff,
J. Zender,
S. Aizawa,
M. Dósa,
L. Griton,
D. Heyner,
G. Ho,
S. M. Imber,
X. Jia,
T. Karlsson,
R. M. Killen,
M. Laurenza,
S. T. Lindsay,
S. McKenna-Lawlor,
A. Mura,
J. M. Raines,
D. A. Rothery,
N. André,
W. Baumjohann,
A. Berezhnoy,
P. -A. Bourdin,
E. J. Bunce
, et al. (54 additional authors not shown)
Abstract:
The ESA-JAXA BepiColombo mission will provide simultaneous measurements from two spacecraft, offering an unprecedented opportunity to investigate magnetospheric and exospheric dynamics at Mercury as well as their interactions with the solar wind, radiation, and interplanetary dust. Many scientific instruments onboard the two spacecraft will be completely, or partially devoted to study the near-spa…
▽ More
The ESA-JAXA BepiColombo mission will provide simultaneous measurements from two spacecraft, offering an unprecedented opportunity to investigate magnetospheric and exospheric dynamics at Mercury as well as their interactions with the solar wind, radiation, and interplanetary dust. Many scientific instruments onboard the two spacecraft will be completely, or partially devoted to study the near-space environment of Mercury as well as the complex processes that govern it. Many issues remain unsolved even after the MESSENGER mission that ended in 2015. The specific orbits of the two spacecraft, MPO and Mio, and the comprehensive scientific payload allow a wider range of scientific questions to be addressed than those that could be achieved by the individual instruments acting alone, or by previous missions. These joint observations are of key importance because many phenomena in Mercury's environment are highly temporally and spatially variable. Examples of possible coordinated observations are described in this article, analysing the required geometrical conditions, pointing, resolutions and operation timing of different BepiColombo instruments sensors.
△ Less
Submitted 26 February, 2022;
originally announced February 2022.
-
Exploring the Solar Wind from its Source on the Corona into the Inner Heliosphere during the First Solar Orbiter - Parker Solar Probe Quadrature
Authors:
Daniele Telloni,
Vincenzo Andretta,
Ester Antonucci,
Alessandro Bemporad,
Giuseppe E. Capuano,
Silvano Fineschi,
Silvio Giordano,
Shadia Habbal,
Denise Perrone,
Rui F. Pinto,
Luca Sorriso-Valvo,
Daniele Spadaro,
Roberto Susino,
Lloyd D. Woodham,
Gary P. Zank,
Marco Romoli,
Stuart D. Bale,
Justin C. Kasper,
Frédéric Auchère,
Roberto Bruno,
Gerardo Capobianco,
Anthony W. Case,
Chiara Casini,
Marta Casti,
Paolo Chioetto
, et al. (46 additional authors not shown)
Abstract:
This Letter addresses the first Solar Orbiter (SO) -- Parker Solar Probe (PSP) quadrature, occurring on January 18, 2021, to investigate the evolution of solar wind from the extended corona to the inner heliosphere. Assuming ballistic propagation, the same plasma volume observed remotely in corona at altitudes between 3.5 and 6.3 solar radii above the solar limb with the Metis coronagraph on SO ca…
▽ More
This Letter addresses the first Solar Orbiter (SO) -- Parker Solar Probe (PSP) quadrature, occurring on January 18, 2021, to investigate the evolution of solar wind from the extended corona to the inner heliosphere. Assuming ballistic propagation, the same plasma volume observed remotely in corona at altitudes between 3.5 and 6.3 solar radii above the solar limb with the Metis coronagraph on SO can be tracked to PSP, orbiting at 0.1 au, thus allowing the local properties of the solar wind to be linked to the coronal source region from where it originated. Thanks to the close approach of PSP to the Sun and the simultaneous Metis observation of the solar corona, the flow-aligned magnetic field and the bulk kinetic energy flux density can be empirically inferred along the coronal current sheet with an unprecedented accuracy, allowing in particular estimation of the Alfvén radius at 8.7 solar radii during the time of this event. This is thus the very first study of the same solar wind plasma as it expands from the sub-Alfvénic solar corona to just above the Alfvén surface.
△ Less
Submitted 21 October, 2021;
originally announced October 2021.
-
First light observations of the solar wind in the outer corona with the Metis coronagraph
Authors:
M. Romoli,
E. Antonucci,
V. Andretta,
G. E. Capuano,
V. Da Deppo,
Y. De Leo,
C. Downs,
S. Fineschi,
P. Heinzel,
F. Landini,
A. Liberatore,
G. Naletto,
G. Nicolini,
M. Pancrazzi,
C. Sasso,
D. Spadaro,
R. Susino,
D. Telloni,
L. Teriaca,
M. Uslenghi,
Y. M. Wang,
A. Bemporad,
G. Capobianco,
M. Casti,
M. Fabi
, et al. (43 additional authors not shown)
Abstract:
The investigation of the wind in the solar corona initiated with the observations of the resonantly scattered UV emission of the coronal plasma obtained with UVCS-SOHO, designed to measure the wind outflow speed by applying the Doppler dimming diagnostics. Metis on Solar Orbiter complements the UVCS spectroscopic observations, performed during solar activity cycle 23, by simultaneously imaging the…
▽ More
The investigation of the wind in the solar corona initiated with the observations of the resonantly scattered UV emission of the coronal plasma obtained with UVCS-SOHO, designed to measure the wind outflow speed by applying the Doppler dimming diagnostics. Metis on Solar Orbiter complements the UVCS spectroscopic observations, performed during solar activity cycle 23, by simultaneously imaging the polarized visible light and the HI Ly-alpha corona in order to obtain high-spatial and temporal resolution maps of the outward velocity of the continuously expanding solar atmosphere. The Metis observations, on May 15, 2020, provide the first HI Ly-alpha images of the extended corona and the first instantaneous map of the speed of the coronal plasma outflows during the minimum of solar activity and allow us to identify the layer where the slow wind flow is observed. The polarized visible light (580-640 nm), and the UV HI Ly-alpha (121.6 nm) coronal emissions, obtained with the two Metis channels, are combined in order to measure the dimming of the UV emission relative to a static corona. This effect is caused by the outward motion of the coronal plasma along the direction of incidence of the chromospheric photons on the coronal neutral hydrogen. The plasma outflow velocity is then derived as a function of the measured Doppler dimming. The static corona UV emission is simulated on the basis of the plasma electron density inferred from the polarized visible light. This study leads to the identification, in the velocity maps of the solar corona, of the high-density layer about +/-10 deg wide, centered on the extension of a quiet equatorial streamer present at the East limb where the slowest wind flows at about (160 +/- 18) km/s from 4 Rs to 6 Rs. Beyond the boundaries of the high-density layer, the wind velocity rapidly increases, marking the transition between slow and fast wind in the corona.
△ Less
Submitted 24 June, 2021;
originally announced June 2021.
-
Cosmic-ray flux predictions and observations for and with Metis on board Solar Orbiter
Authors:
C. Grimani,
V. Andretta,
P. Chioetto,
V. Da Deppo,
M. Fabi,
S. Gissot,
G. Naletto,
A. Persici,
C. Plainaki,
M. Romoli,
F. Sabbatini,
D. Spadaro,
M. Stangalini,
D. Telloni,
M. Uslenghi,
E. Antonucci,
A. Bemporad,
G. Capobianco,
G. Capuano,
M. Casti,
Y. De Leo,
S. Fineschi,
F. Frassati,
F. Frassetto,
P. Heinzel
, et al. (19 additional authors not shown)
Abstract:
The Metis coronagraph is one of the remote sensing instruments hosted on board the ESA/NASA Solar Orbiter mission. Metis is devoted to carry out the first simultaneous imaging of the solar corona in both visible light (VL) and ultraviolet (UV). High-energy particles penetrate spacecraft materials and may limit the performance of on-board instruments. A study of galactic cosmic-ray (GCR) tracks obs…
▽ More
The Metis coronagraph is one of the remote sensing instruments hosted on board the ESA/NASA Solar Orbiter mission. Metis is devoted to carry out the first simultaneous imaging of the solar corona in both visible light (VL) and ultraviolet (UV). High-energy particles penetrate spacecraft materials and may limit the performance of on-board instruments. A study of galactic cosmic-ray (GCR) tracks observed in the first VL images gathered by Metis during the commissioning phase for a total of 60 seconds of exposure time is presented here. A similar analysis is planned for the UV channel. A prediction of the GCR flux up to hundreds of GeV is made here for the first part of the Solar Orbiter mission to study the Metis coronagraph performance. GCR model predictions are compared to observations gathered on board Solar Orbiter by the EPD/HET experiment in the range 10 MeV-100 MeV in the summer 2020 and with previous measurements. Estimated cosmic-ray fluxes above 70 MeV n$^{-1}$ have been also parameterized and used for Monte Carlo simulations aiming at reproducing the cosmic-ray track observations in the Metis coronagraph VL images. The same parameterizations can also be used to study the performance of other detectors. By comparing observations of cosmic-ray tracks in the Metis VL images with FLUKA Monte Carlo simulations of cosmic-ray interactions in the VL detector, it is found that cosmic rays fire a fraction of the order of 10$^{-4}$ of the whole image pixel sample. Therefore, cosmic rays do not affect sensibly the quality of Metis VL images. It is also found that the overall efficiency for cosmic-ray identification in the Metis VL images is approximately equal to the contribution of Z$>$2 particles. As a result, the Metis coronagraph may play the role of a proton monitor for long-term GCR variations during the overall mission duration.
△ Less
Submitted 11 June, 2021; v1 submitted 28 April, 2021;
originally announced April 2021.
-
Mirrors for space telescopes: degradation issues
Authors:
D. Garoli,
L. V. Rodriguez De Marcos,
J. I. Larruquert,
A. J. Corso,
R. Proietti Zaccaria,
M. G. Pelizzo
Abstract:
Mirrors are a subset of optical components essential for the success of current and future space missions. Most of the telescopes for space programs ranging from Earth Observation to Astrophysics and covering all the electromagnetic spectrum from X-rays to Far-Infrared are based on reflective optics. Mirrors operate in diverse and harsh environments that range from Low-Earth Orbit, to interplaneta…
▽ More
Mirrors are a subset of optical components essential for the success of current and future space missions. Most of the telescopes for space programs ranging from Earth Observation to Astrophysics and covering all the electromagnetic spectrum from X-rays to Far-Infrared are based on reflective optics. Mirrors operate in diverse and harsh environments that range from Low-Earth Orbit, to interplanetary orbits and the deep space. The operational life of space observatories spans from minutes (sounding rockets) to decades (large observatories), and the performance of the mirrors within the optical system is susceptible to degrade, which results in a transient optical efficiency of the instrument. The degradation that occurs in space environments depends on the operational life on the orbital properties of the space mission, and it reduces the total system throughput and hence compromises the science return. Therefore, the knowledge of potential degradation physical mechanisms, how they affect mirror performance, and how to prevent it, is of paramount importance to ensure the long-term success of space telescopes. In this review we report an overview on current mirror technology for space missions with a particular focus on the importance of degradation and radiation resistance of the coating materials. Particular detail will be given to degradation effects on mirrors for the far and extreme UV as in these ranges the degradation is enhanced by the strong absorption of most contaminants.
△ Less
Submitted 30 September, 2020;
originally announced October 2020.
-
Metis: the Solar Orbiter visible light and ultraviolet coronal imager
Authors:
Ester Antonucci,
Marco Romoli,
Vincenzo Andretta,
Silvano Fineschi,
Petr Heinzel,
J. Daniel Moses,
Giampiero Naletto,
Gianalfredo Nicolini,
Daniele Spadaro,
Luca Teriaca,
Arkadiusz Berlicki,
Gerardo Capobianco,
Giuseppe Crescenzio,
Vania Da Deppo,
Mauro Focardi,
Fabio Frassetto,
Klaus Heerlein,
Federico Landini,
Enrico Magli,
Andrea Marco Malvezzi,
Giuseppe Massone,
Radek Melich,
Piergiorgio Nicolosi,
Giancarlo Noci,
Maurizio Pancrazzi
, et al. (78 additional authors not shown)
Abstract:
Metis is the first solar coronagraph designed for a space mission capable of performing simultaneous imaging of the off-limb solar corona in both visible and UV light. The observations obtained with Metis aboard the Solar Orbiter ESA-NASA observatory will enable us to diagnose, with unprecedented temporal coverage and spatial resolution, the structures and dynamics of the full corona from 1.7…
▽ More
Metis is the first solar coronagraph designed for a space mission capable of performing simultaneous imaging of the off-limb solar corona in both visible and UV light. The observations obtained with Metis aboard the Solar Orbiter ESA-NASA observatory will enable us to diagnose, with unprecedented temporal coverage and spatial resolution, the structures and dynamics of the full corona from 1.7 $R_\odot$ to about 9 $R_\odot$. Due to the uniqueness of the Solar Orbiter mission profile, Metis will be able to observe the solar corona from a close vantage point (down to 0.28 AU), achieving out-of-ecliptic views with the increase of the orbit inclination over time. Moreover, observations near perihelion, during the phase of lower rotational velocity of the solar surface relative to the spacecraft, will allow longer-term studies of the coronal features. Thanks to a novel occultation design and a combination of a UV interference coating of the mirrors and a spectral bandpass filter, Metis images the solar corona simultaneously in the visible light band, between 580 and 640 nm, and in the UV H I Lyman-α line at 121.6 nm. The coronal images in both the UV Lyman-α and polarised visible light are obtained at high spatial resolution with a spatial scale down to about 2000 km and 15000 km at perihelion, in the cases of the visible and UV light, respectively. A temporal resolution down to 1 second can be achieved when observing coronal fluctuations in visible light. The Metis measurements will allow for complete characterisation of the main physical parameters and dynamics of the electron and neutral hydrogen/proton plasma components of the corona in the region where the solar wind undergoes acceleration and where the onset and initial propagation of coronal mass ejections take place, thus significantly improving our understanding of the region connecting the Sun to the heliosphere.
△ Less
Submitted 14 November, 2019;
originally announced November 2019.
-
LISA: Mars and the limits of life
Authors:
G. Galletta,
M. D'Alessandro,
G. Bertoloni,
G. Fanti,
E. Dainese,
M. Pelizzo,
F. Ferri,
D. Pavarin,
C. Bettanini,
G. Bianchini,
S. Debei
Abstract:
We describe the results of the first tests made on LISA, a simulator of planetary environments designed and built in Padua, dedicated to the study of the limit of bacterial life on the planet Mars. Tests on the cryogenic circuit, on the UV illumination and on bacterial coltures at room temperature that shall be used as references are described.
We describe the results of the first tests made on LISA, a simulator of planetary environments designed and built in Padua, dedicated to the study of the limit of bacterial life on the planet Mars. Tests on the cryogenic circuit, on the UV illumination and on bacterial coltures at room temperature that shall be used as references are described.
△ Less
Submitted 5 June, 2007;
originally announced June 2007.