-
Multi-purpose InSTRument for Astronomy at Low-resolution: MISTRAL@OHP
Authors:
J. Schmitt,
C. Adami,
M. Dennefeld,
F. Agneray,
S. Basa,
J. C. Brunel,
V. Buat,
D. Burgarella,
C. Carvalho,
G. Castagnoli,
N. Grosso,
F. Huppert,
C. Moreau,
F. Moreau,
L. Moreau,
E. Muslimov,
S. Pascal,
S. Perruchot,
D. Russeil,
J. L. Beuzit,
F. Dolon,
M. Ferrari,
B. Hamelin,
A. LevanSuu,
K. Aravind
, et al. (9 additional authors not shown)
Abstract:
MISTRAL is the new Faint Object Spectroscopic Camera mounted at the folded Cassegrain focus of the 1.93m telescope of Haute-Provence Observatory. We describe the design and components of the instrument and give some details about its operation. We emphasise in particular the various observing modes and the performances of the detector. A short description is also given about the working environmen…
▽ More
MISTRAL is the new Faint Object Spectroscopic Camera mounted at the folded Cassegrain focus of the 1.93m telescope of Haute-Provence Observatory. We describe the design and components of the instrument and give some details about its operation. We emphasise in particular the various observing modes and the performances of the detector. A short description is also given about the working environment. Various types of objects, including stars, nebulae, comets, novae, galaxies have been observed during various test phases to evaluate the performances of the instrument. The instrument covers the range of 4000 to 8000A with the blue setting, or from 6000 to 10000A with the red setting, at an average spectral resolution of 700. Its peak efficiency is about 22% at 6000A. In spectroscopy, a limiting magnitude of 19.5 can be achieved for a point source in one hour with a signal to noise of 3 in the continuum (and better if emission lines are present). In imaging mode, limiting magnitudes of 20-21 can be obtained in 10-20mn (with average seing conditions of 2.5 arcsec at OHP). The instrument is very users-friendly and can be put into operations in less than 15mn (rapid change-over from the other instrument in use) if required by the science (like for Gamma-Rays Bursts). Some first scientific results are described for various types of objects, and in particular for the follow-up of GRBs. While some further improvements are still under way, in particular to ease the switch from blue to red setting and add more grisms or filters, MISTRAL is ready for the follow-up of transients and other variable objects, in the soon-to-come era of e.g. the SVOM satellite and of the Rubin telescope.
△ Less
Submitted 4 April, 2024;
originally announced April 2024.
-
The EUCLID NISP grisms flight models performance
Authors:
Anne Costille,
A. Caillat,
C. Rossin,
S. Pascal,
P. Sanchez,
R. Barette,
P. Laurent,
B. Foulon,
C. Pariès
Abstract:
ESA EUCLID mission will be launched in 2020 to understand the nature of the dark energy responsible of the accelerated expansion of the Universe and to map the geometry of the dark matter. The map will investigate the distanceredshift relationship and the evolution of cosmic structures thanks to two instruments: the NISP and the VIS. The NISP (Near Infrared Spectro-Photometer) is operating in the…
▽ More
ESA EUCLID mission will be launched in 2020 to understand the nature of the dark energy responsible of the accelerated expansion of the Universe and to map the geometry of the dark matter. The map will investigate the distanceredshift relationship and the evolution of cosmic structures thanks to two instruments: the NISP and the VIS. The NISP (Near Infrared Spectro-Photometer) is operating in the near-IR spectral range (0.9-2$μ$m) with two observing modes: the photometric mode for the acquisition of images with broad band filters, and the spectroscopic mode for the acquisition of slitless dispersed images on the detectors. The spectroscopic mode uses four low resolution grisms to cover two spectral ranges: three ''red'' grisms for 1250-1850nm range, with three different orientations, and one ''blue'' grism for 920- 1300nm range. The NISP grisms are complex optical components combining four main optical functions: a grism function (dispersion without beam deviation of the first diffracted order) done by the grating on the prism hypotenuse, a spectral filter done by a multilayer filter deposited on the first face of the prism to select the spectral bandpass, a focus function done by the curved filter face of the prism (curvature radius of 10m) and a spectral wavefront correction done by the grating which grooves paths are nor parallel, neither straight. The development of these components have been started since 10 years at the Laboratoire d'Astrophysique de Marseille (LAM) and was linked to the project phases: prototypes have been developed to demonstrate the feasibility, then engineering and qualification models to validate the optical and mechanical performance of the component, finally the flight models have been manufactured and tested and will be installed on NISP instrument. In this paper, we present the optical performance of the four EUCLID NISP grisms flight models characterized at LAM: wavefront error, spectral transmission and grating groove profiles. The test devices and the methods developed for the characterization of these specific optical components are described. The analysis of the test results have shown that the grisms flight models for NISP are within specifications with an efficiency better than 70% on the spectral bandpass and a wavefront error on surfaces better than 30nm RMS. The components have withstood vibration qualification level up to 11.6g RMS in random test and vacuum cryogenics test down to 130K with measurement of optical quality in transmission. The EUCLID grisms flight models have been delivered to NISP project in November 2017 after the test campaign done at LAM that has demonstrated the compliance to the specifications.
△ Less
Submitted 16 March, 2023;
originally announced March 2023.
-
FIREBall-2: The Faint Intergalactic Medium Redshifted Emission Balloon Telescope
Authors:
Erika Hamden,
D. Christopher Martin,
Bruno Milliard,
David Schiminovich,
Shouleh Nikzad,
Jean Evrard,
Gillian Kyne,
Robert Grange,
Johan Montel,
Etienne Pirot,
Keri Hoadley,
Donal O'Sullivan,
Nicole Melso,
Vincent Picouet,
Didier Vibert,
Philippe Balard,
Patrick Blanchard,
Marty Crabill,
Sandrine Pascal,
Frederi Mirc,
Nicolas Bray,
April Jewell,
Julia Blue Bird,
Jose Zorilla,
Hwei Ru Ong
, et al. (9 additional authors not shown)
Abstract:
The Faint Intergalactic Medium Redshifted Emission Balloon (FIREBall) is a mission designed to observe faint emission from the circumgalactic medium of moderate redshift (z~0.7) galaxies for the first time. FIREBall observes a component of galaxies that plays a key role in how galaxies form and evolve, likely contains a significant amount of baryons, and has only recently been observed at higher r…
▽ More
The Faint Intergalactic Medium Redshifted Emission Balloon (FIREBall) is a mission designed to observe faint emission from the circumgalactic medium of moderate redshift (z~0.7) galaxies for the first time. FIREBall observes a component of galaxies that plays a key role in how galaxies form and evolve, likely contains a significant amount of baryons, and has only recently been observed at higher redshifts in the visible. Here we report on the 2018 flight of the FIREBall-2 Balloon telescope, which occurred on September 22nd, 2018 from Fort Sumner, New Mexico. The flight was the culmination of a complete redesign of the spectrograph from the original FIREBall fiber-fed IFU to a wide-field multi-object spectrograph. The flight was terminated early due to a hole in the balloon, and our original science objectives were not achieved. The overall sensitivity of the instrument and telescope was 90,000 LU, due primarily to increased noise from stray light. We discuss the design of the FIREBall-2 spectrograph, modifications from the original FIREBall payload, and provide an overview of the performance of all systems. We were able to successfully flight test a new pointing control system, a UV-optimized, delta-doped and coated EMCCD, and an aspheric grating. The FIREBall-2 team is rebuilding the payload for another flight attempt in the Fall of 2021, delayed from 2020 due to COVID-19.
△ Less
Submitted 16 July, 2020;
originally announced July 2020.
-
FIREBall-2: advancing TRL while doing proof-of-concept astrophysics on a suborbital platform
Authors:
Erika T. Hamden,
Keri Hoadley,
D. Christopher Martin,
David Schiminovich,
Bruno Milliard,
Shouleh Nikzad,
Ramona Augustin,
Philippe Balard,
Patrick Blanchard,
Nicolas Bray,
Marty Crabill,
Jean Evrard,
Albert Gomes,
Robert Grange,
Julia Gross,
April Jewell,
Gillian Kyne,
Michele Limon,
Nicole Lingner,
Mateusz Matuszewski,
Nicole Melso,
Frederi Mirc,
Johan Montel,
Hwei Ru Ong,
Donal O'Sullivan
, et al. (10 additional authors not shown)
Abstract:
Here we discuss advances in UV technology over the last decade, with an emphasis on photon counting, low noise, high efficiency detectors in sub-orbital programs. We focus on the use of innovative UV detectors in a NASA astrophysics balloon telescope, FIREBall-2, which successfully flew in the Fall of 2018. The FIREBall-2 telescope is designed to make observations of distant galaxies to understand…
▽ More
Here we discuss advances in UV technology over the last decade, with an emphasis on photon counting, low noise, high efficiency detectors in sub-orbital programs. We focus on the use of innovative UV detectors in a NASA astrophysics balloon telescope, FIREBall-2, which successfully flew in the Fall of 2018. The FIREBall-2 telescope is designed to make observations of distant galaxies to understand more about how they evolve by looking for diffuse hydrogen in the galactic halo. The payload utilizes a 1.0-meter class telescope with an ultraviolet multi-object spectrograph and is a joint collaboration between Caltech, JPL, LAM, CNES, Columbia, the University of Arizona, and NASA. The improved detector technology that was tested on FIREBall-2 can be applied to any UV mission. We discuss the results of the flight and detector performance. We will also discuss the utility of sub-orbital platforms (both balloon payloads and rockets) for testing new technologies and proof-of-concept scientific ideas
△ Less
Submitted 3 May, 2019; v1 submitted 1 May, 2019;
originally announced May 2019.
-
Multi Object Spectrograph of the Fireball-II Balloon Experiment
Authors:
G Lemaitre,
R. Grange,
S Quiret,
B. Milliard,
S. Pascal,
V Lamandé
Abstract:
Fireball-II is a NASA/CNES balloon-borne telescope and MOS to study faint diffuse emissions of galaxies in the space ultraviolet. The MOS is based on two identical reflective Schmidt systems sharing an plane-aspherized grating obtained by active optics methods.
Fireball-II is a NASA/CNES balloon-borne telescope and MOS to study faint diffuse emissions of galaxies in the space ultraviolet. The MOS is based on two identical reflective Schmidt systems sharing an plane-aspherized grating obtained by active optics methods.
△ Less
Submitted 6 March, 2019;
originally announced March 2019.
-
Opto-mechanical designs for the HARMONI Adaptive Optics systems
Authors:
Kjetil Dohlen,
Timothy Morris,
Javier Piqueras Lopez,
Ariadna Calcines-Rosario,
Anne Costille,
Marc Dubbeldam,
Kacem El Hadi,
Thierry Fusco,
Marc Llored,
Benoit Neichel,
Sandrine Pascal,
Jean-Francois Sauvage,
Pascal Vola,
Fraser Clarke,
Hermine Schnetler,
Ian Bryson,
Niranjan Thatte
Abstract:
HARMONI is a visible and near-infrared integral field spectrograph equipped with two complementary adaptive optics systems, fully integrated within the instrument. A Single Conjugate AO (SCAO) system offers high performance for a limited sky coverage and a Laser Tomographic AO (LTAO) system provides AO correction with a very high sky-coverage. While the deformable mirror performing real-time corre…
▽ More
HARMONI is a visible and near-infrared integral field spectrograph equipped with two complementary adaptive optics systems, fully integrated within the instrument. A Single Conjugate AO (SCAO) system offers high performance for a limited sky coverage and a Laser Tomographic AO (LTAO) system provides AO correction with a very high sky-coverage. While the deformable mirror performing real-time correction of the atmospheric disturbances is located within the telescope itself, the instrument contains a suite of state-of-the-art and innovative wavefront sensor systems. Laser guide star sensors (LGSS) are located at the entrance of the instrument and fed by a dichroic beam splitter, while the various natural guide star sensors for LTAO and SCAO are located close to the science focal plane. We present opto-mechanical architecture and design at PDR level for these wavefront sensor systems.
△ Less
Submitted 29 June, 2018;
originally announced July 2018.
-
The adaptive optics modes for HARMONI: from Classical to Laser Assisted Tomographic AO
Authors:
B. Neichel,
T. Fusco,
J. -F. Sauvage,
C. Correia,
K. Dohlen,
K. El-Hadi,
L. Blanco,
N. Schwartz,
F. Clarke,
N. Thatte,
M. Tecza,
J. Paufique,
J. Vernet,
M. Le Louarn,
P. Hammersley,
J. -L. Gach,
S. Pascal,
P. Vola,
C. Petit,
J. -M. Conan,
A. Carlotti,
C. Verinaud,
H. Schnetler,
I. Bryson,
T. Morris
, et al. (3 additional authors not shown)
Abstract:
HARMONI is a visible and NIR integral field spectrograph, providing the E-ELT's core spectroscopic capability at first light. HARMONI will work at the diffraction limit of the E-ELT, thanks to a Classical and a Laser Tomographic AO system. In this paper, we present the system choices that have been made for these SCAO and LTAO modules. In particular, we describe the strategy developed for the diff…
▽ More
HARMONI is a visible and NIR integral field spectrograph, providing the E-ELT's core spectroscopic capability at first light. HARMONI will work at the diffraction limit of the E-ELT, thanks to a Classical and a Laser Tomographic AO system. In this paper, we present the system choices that have been made for these SCAO and LTAO modules. In particular, we describe the strategy developed for the different Wave-Front Sensors: pyramid for SCAO, the LGSWFS concept, the NGSWFS path, and the truth sensor capabilities. We present first potential implementations. And we asses the first system performance.
△ Less
Submitted 30 May, 2018;
originally announced May 2018.
-
SUBARU prime focus spectrograph: integration, testing and performance for the first spectrograph
Authors:
F. Madec,
A. Le Fur,
D. Le Mignant,
K. Dohlen,
R. Barrette,
M. Belhadi,
S. Pascal,
S. Smee,
J. Gunn,
J. Le Merrer,
M. Lorred,
M. Jaquet,
P. Balard,
P. Blanchard,
W. Thao,
F. Roman,
V. Lapere,
JF Gabriel,
C. Loomis,
M. Golebiowski,
M. Hart,
L. Oliveira,
A. Oliveira,
N. Tamura,
A. Shimono
Abstract:
The Prime Focus Spectrograph (PFS) of the Subaru Measurement of Images and Redshifts (SuMIRe) project for Subaru telescope consists in four identical spectrographs fed by 600 fibers each. Each spectrograph is composed by an optical entrance unit that creates a collimated beam and distributes the light to three channels, two visibles and one near infrared. This paper presents the on-going effort fo…
▽ More
The Prime Focus Spectrograph (PFS) of the Subaru Measurement of Images and Redshifts (SuMIRe) project for Subaru telescope consists in four identical spectrographs fed by 600 fibers each. Each spectrograph is composed by an optical entrance unit that creates a collimated beam and distributes the light to three channels, two visibles and one near infrared. This paper presents the on-going effort for the tests & integration process for the first spectrograph channel: we have developed a detailed Assembly Integration and Test (AIT) plan, as well as the methods, detailed processes and I&T tools. We describe the tools we designed to assemble the parts and to test the performance of the spectrograph. We also report on the thermal acceptance tests we performed on the first visible camera unit. We also report on and discuss the technical difficulties that did appear during this integration phase. Finally, we detail the important logistic process that is require to transport the components from other country to Marseille.
△ Less
Submitted 3 August, 2016;
originally announced August 2016.
-
Prime Focus Spectrograph (PFS) for the Subaru Telescope: Overview, recent progress, and future perspectives
Authors:
Naoyuki Tamura,
Naruhisa Takato,
Atsushi Shimono,
Yuki Moritani,
Kiyoto Yabe,
Yuki Ishizuka,
Akitoshi Ueda,
Yukiko Kamata,
Hrand Aghazarian,
Stephane Arnouts,
Gabriel Barban,
Robert H. Barkhouser,
Renato C. Borges,
David F. Braun,
Michael A. Carr,
Pierre-Yves Chabaud,
Yin-Chang Chang,
Hsin-Yo Chen,
Masashi Chiba,
Richard C. Y. Chou,
You-Hua Chu,
Judith G. Cohen,
Rodrigo P. de Almeida,
Antonio C. de Oliveira,
Ligia S. de Oliveira
, et al. (75 additional authors not shown)
Abstract:
PFS (Prime Focus Spectrograph), a next generation facility instrument on the 8.2-meter Subaru Telescope, is a very wide-field, massively multiplexed, optical and near-infrared spectrograph. Exploiting the Subaru prime focus, 2394 reconfigurable fibers will be distributed over the 1.3 deg field of view. The spectrograph has been designed with 3 arms of blue, red, and near-infrared cameras to simult…
▽ More
PFS (Prime Focus Spectrograph), a next generation facility instrument on the 8.2-meter Subaru Telescope, is a very wide-field, massively multiplexed, optical and near-infrared spectrograph. Exploiting the Subaru prime focus, 2394 reconfigurable fibers will be distributed over the 1.3 deg field of view. The spectrograph has been designed with 3 arms of blue, red, and near-infrared cameras to simultaneously observe spectra from 380nm to 1260nm in one exposure at a resolution of ~1.6-2.7A. An international collaboration is developing this instrument under the initiative of Kavli IPMU. The project is now going into the construction phase aiming at undertaking system integration in 2017-2018 and subsequently carrying out engineering operations in 2018-2019. This article gives an overview of the instrument, current project status and future paths forward.
△ Less
Submitted 3 August, 2016;
originally announced August 2016.
-
The FLARE mission: Deep and Wide-field 1-5$μ$m Imaging and Spectroscopy for the Early Universe: a proposal for M5 Cosmic Vision call
Authors:
D. Burgarella,
P. Levacher,
S. Vives,
K. Dohlen,
S. Pascal
Abstract:
FLARE (First Light And Reionization Explorer) is a space mission that will be submitted to ESA (M5 call). Its primary goal (about 80% of lifetime) is to identify and study galaxies that dwell in the universe before the end of the reionization up to about z = 15, a redshift that might not be statistically reachable for JWST, Euclid and WFIRST. A secondary objective (about 20% of lifetime) is to sur…
▽ More
FLARE (First Light And Reionization Explorer) is a space mission that will be submitted to ESA (M5 call). Its primary goal (about 80% of lifetime) is to identify and study galaxies that dwell in the universe before the end of the reionization up to about z = 15, a redshift that might not be statistically reachable for JWST, Euclid and WFIRST. A secondary objective (about 20% of lifetime) is to survey star formation in the Milky Way.
The strategy selected for FLARE optimizes the science return: imaging and spectroscopic integral-field observations will be carried out simultaneously on two parallel focal planes and over very wide instantaneous fields of view. FLARE will feature an instantaneous field of view of about 0.2 deg$^2$ with 0.2-arcsec pixels and an instantaneous integral-field spectroscopic field of view of about 1 arcmin$^2$ with R = 500 - 1000 and an angular resolution of about 0.4 arcsec. To detect first-light galaxies, the imaging and spectroscopic survey (parallel observations over about 6 years) will reach m$_{AB}$ = 28 and f$_λ$ = 10$^{-18}$ erg/cm$^2$/S.
FLARE will help addressing two of ESA's Cosmic Vision themes: a) "How did the universe originate and what is it made of?" and b) "What are the conditions for planet formation and the emergence of life?" and more specifically, "From gas and dust to stars and planets".
FLARE will provide to the ESA community a leading position to statistically study the early universe after JWST's deep but pin-hole surveys. Moreover, the instrumental development of wide-field imaging and wide-field integral-field spectroscopy in space will be a major breakthrough after making them available on ground-based telescopes.
△ Less
Submitted 22 July, 2016;
originally announced July 2016.
-
Prime Focus Spectrograph for the Subaru telescope: massively multiplexed optical and near-infrared fiber spectrograph
Authors:
Hajime Sugai,
Naoyuki Tamura,
Hiroshi Karoji,
Atsushi Shimono,
Naruhisa Takato,
Masahiko Kimura,
Youichi Ohyama,
Akitoshi Ueda,
Hrand Aghazarian,
Marcio Vital de Arruda,
Robert H. Barkhouser,
Charles L. Bennett,
Steve Bickerton,
Alexandre Bozier,
David F. Braun,
Khanh Bui,
Christopher M. Capocasale,
Michael A. Carr,
Bruno Castilho,
Yin-Chang Chang,
Hsin-Yo Chen,
Richard C. Y. Chou,
Olivia R. Dawson,
Richard G. Dekany,
Eric M. Ek
, et al. (59 additional authors not shown)
Abstract:
The Prime Focus Spectrograph (PFS) is an optical/near-infrared multifiber spectrograph with 2394 science fibers distributed across a 1.3-deg diameter field of view at the Subaru 8.2-m telescope. The wide wavelength coverage from 0.38 μm to 1.26 μm, with a resolving power of 3000, simultaneously strengthens its ability to target three main survey programs: cosmology, galactic archaeology and galaxy…
▽ More
The Prime Focus Spectrograph (PFS) is an optical/near-infrared multifiber spectrograph with 2394 science fibers distributed across a 1.3-deg diameter field of view at the Subaru 8.2-m telescope. The wide wavelength coverage from 0.38 μm to 1.26 μm, with a resolving power of 3000, simultaneously strengthens its ability to target three main survey programs: cosmology, galactic archaeology and galaxy/AGN evolution. A medium resolution mode with a resolving power of 5000 for 0.71 μm to 0.89 μm will also be available by simply exchanging dispersers. We highlight some of the technological aspects of the design. To transform the telescope focal ratio, a broad-band coated microlens is glued to each fiber tip. A higher transmission fiber is selected for the longest part of the cable system, optimizing overall throughput; a fiber with low focal ratio degradation is selected for the fiber-positioner and fiber-slit components, minimizing the effects of fiber movements and fiber bending. Fiber positioning will be performed by a positioner consisting of two stages of piezo-electric rotary motors. The positions of these motors are measured by taking an image of artificially back-illuminated fibers with the metrology camera located in the Cassegrain container; the fibers are placed in the proper location by iteratively measuring and then adjusting the positions of the motors. Target light reaches one of the four identical fast-Schmidt spectrograph modules, each with three arms. The PFS project has passed several project-wide design reviews and is now in the construction phase.
△ Less
Submitted 2 July, 2015;
originally announced July 2015.
-
Optical Design of the SuMIRe PFS Spectrograph
Authors:
Sandrine Pascal,
Sebastien Vives,
Robert Barkhouser,
James Gunn
Abstract:
The SuMIRe Prime Focus Spectrograph (PFS), developed for the 8-m class SUBARU telescope, will consist of four identical spectrographs, each receiving 600 fibers from a 2394 fiber robotic positioner at the telescope prime focus. Each spectrograph includes three spectral channels to cover the wavelength range 0.38-1.26 um with a resolving power ranging between 2000 and 4000. A medium resolution mode…
▽ More
The SuMIRe Prime Focus Spectrograph (PFS), developed for the 8-m class SUBARU telescope, will consist of four identical spectrographs, each receiving 600 fibers from a 2394 fiber robotic positioner at the telescope prime focus. Each spectrograph includes three spectral channels to cover the wavelength range 0.38-1.26 um with a resolving power ranging between 2000 and 4000. A medium resolution mode is also implemented to reach a resolving power of 5000 at 0.8 um. Each spectrograph is made of 4 optical units: the entrance unit which produces three corrected collimated beams and three camera units (one per spectral channel). The beam is split by using two large dichroics; and in each arm, the light is dispersed by large VPH gratings. The proposed optical design was optimized to achieve the requested image quality while simplifying the manufacturing of the whole optical system. The camera design consists in an innovative Schmidt camera observing a large field-of-view (10 degrees) with a very fast beam. To achieve such a performance, the classical spherical mirror is replaced by a catadioptric mirror (i.e meniscus lens with a reflective surface on the rear side of the glass, like a Mangin mirror). This article focuses on the optical architecture of the PFS spectrograph and the perfornance achieved. We will first described the global optical design of the spectrograph. Then, we will focus on the Mangin-Schmidt camera design. The analysis of the optical performance and the results obtained are presented in the last section.
△ Less
Submitted 18 August, 2014;
originally announced August 2014.
-
The near infrared camera for the Subaru Prime Focus Spectrograph
Authors:
Stephen A. Smee,
James E. Gunn,
Mirek Golebiowski,
Robert Barkhouser,
Sebastien Vives,
Sandrine Pascal,
Michael Carr,
Stephen C. Hope,
Craig Loomis,
Murdock Hart,
Hajime Sugai,
Naoyuki Tamura,
Atsushi Shimono
Abstract:
We present the detailed design of the near infrared camera for the SuMIRe (Subaru Measurement of Images and Redshifts) Prime Focus Spectrograph (PFS) being developed for the Subaru Telescope. The PFS spectrograph is designed to collect spectra from 2394 objects simultaneously, covering wavelengths that extend from 380 nm - 1.26 um. The spectrograph is comprised of four identical spectrograph modul…
▽ More
We present the detailed design of the near infrared camera for the SuMIRe (Subaru Measurement of Images and Redshifts) Prime Focus Spectrograph (PFS) being developed for the Subaru Telescope. The PFS spectrograph is designed to collect spectra from 2394 objects simultaneously, covering wavelengths that extend from 380 nm - 1.26 um. The spectrograph is comprised of four identical spectrograph modules, with each module collecting roughly 600 spectra from a robotic fiber positioner at the telescope prime focus. Each spectrograph module will have two visible channels covering wavelength ranges 380 nm - 640 nm and 640 nm - 955 nm, and one near infrared (NIR) channel with a wavelength range 955 nm - 1.26 um. Dispersed light in each channel is imaged by a 300 mm focal length, f/1.07, vacuum Schmidt camera onto a 4k x 4k, 15 um pixel, detector format. For the NIR channel a HgCdTe substrate-removed Teledyne 1.7 um cutoff device is used. In the visible channels, CCDs from Hamamatsu are used. These cameras are large, having a clear aperture of 300 mm at the entrance window, and a mass of ~ 250 kg.
Like the two visible channel cameras, the NIR camera contains just four optical elements: a two-element refractive corrector, a Mangin mirror, and a field flattening lens. This simple design produces very good imaging performance considering the wide field and wavelength range, and it does so in large part due to the use of a Mangin mirror (a lens with a reflecting rear surface) for the Schmidt primary. In the case of the NIR camera, the rear reflecting surface is a dichroic, which reflects in-band wavelengths and transmits wavelengths beyond 1.26 um. This, combined with a thermal rejection filter coating on the rear surface of the second corrector element, greatly reduces the out-of-band thermal radiation that reaches the detector.
△ Less
Submitted 12 August, 2014;
originally announced August 2014.
-
Current status of the Spectrograph System for the SuMIRe/PFS
Authors:
S. Vives,
D. Le Mignant,
J. E. Gunn,
S. Smee,
L. Souza de Oliveira,
N. Tamura,
H. Sugai,
R. Barkhouser,
A. Bozier,
M. A. Carr,
A. Cesar de Oliveira,
D. Ferrand,
M. Golebiowski,
M. Hart,
S. Hope,
M. Jaquet,
F. Madec,
S. Pascal,
T. Pegot-Ogier,
M. Vittal de Arruda
Abstract:
The Prime Focus Spectrograph (PFS) is a new facility instrument for Subaru Telescope which will be installed in around 2017. It is a multi-object spectrograph fed by about 2400 fibers placed at the prime focus covering a hexagonal field-of-view with 1.35 deg diagonals and capable of simultaneously obtaining data of spectra with wavelengths ranging from 0.38 um to 1.26 um. The spectrograph system i…
▽ More
The Prime Focus Spectrograph (PFS) is a new facility instrument for Subaru Telescope which will be installed in around 2017. It is a multi-object spectrograph fed by about 2400 fibers placed at the prime focus covering a hexagonal field-of-view with 1.35 deg diagonals and capable of simultaneously obtaining data of spectra with wavelengths ranging from 0.38 um to 1.26 um. The spectrograph system is composed of four identical modules each receiving the light from 600 fibers. Each module incorporates three channels covering the wavelength ranges 0.38-0.65 mu ("Blue"), 0.63-0.97 mu ("Red"), and 0.94-1.26 mu ("NIR") respectively; with resolving power which progresses fairly smoothly from about 2000 in the blue to about 4000 in the infrared. An additional spectral mode allows reaching a spectral resolution of 5000 at 0.8mu (red). The proposed optical design is based on a Schmidt collimator facing three Schmidt cameras (one per spectral channel). This architecture is very robust, well known and documented. It allows for high image quality with only few simple elements (high throughput) at the expense of the central obscuration, which leads to larger optics. Each module has to be modular in its design to allow for integration and tests and for its safe transport up to the telescope: this is the main driver for the mechanical design. In particular, each module will be firstly fully integrated and validated at LAM (France) before it is shipped to Hawaii. All sub-assemblies will be indexed on the bench to allow for their accurate repositioning. This paper will give an overview of the spectrograph system which has successfully passed the Critical Design Review (CDR) in 2014 March and which is now in the construction phase.
△ Less
Submitted 12 August, 2014;
originally announced August 2014.
-
Progress with the Prime Focus Spectrograph for the Subaru Telescope: a massively multiplexed optical and near-infrared fiber spectrograph
Authors:
Hajime Sugai,
Naoyuki Tamura,
Hiroshi Karoji,
Atsushi Shimono,
Naruhisa Takato,
Masahiko Kimura,
Youichi Ohyama,
Akitoshi Ueda,
Hrand Aghazarian,
Marcio Vital de Arruda,
Robert H. Barkhouser,
Charles L. Bennett,
Steve Bickerton,
Alexandre Bozier,
David F. Braun,
Khanh Bui,
Christopher M. Capocasale,
Michael A. Carr,
Bruno Castilho,
Yin-Chang Chang,
Hsin-Yo Chen,
Richard C. Y. Chou,
Olivia R. Dawson,
Richard G. Dekany,
Eric M. Ek
, et al. (59 additional authors not shown)
Abstract:
The Prime Focus Spectrograph (PFS) is an optical/near-infrared multi-fiber spectrograph with 2394 science fibers, which are distributed in 1.3 degree diameter field of view at Subaru 8.2-meter telescope. The simultaneous wide wavelength coverage from 0.38 um to 1.26 um, with the resolving power of 3000, strengthens its ability to target three main survey programs: cosmology, Galactic archaeology,…
▽ More
The Prime Focus Spectrograph (PFS) is an optical/near-infrared multi-fiber spectrograph with 2394 science fibers, which are distributed in 1.3 degree diameter field of view at Subaru 8.2-meter telescope. The simultaneous wide wavelength coverage from 0.38 um to 1.26 um, with the resolving power of 3000, strengthens its ability to target three main survey programs: cosmology, Galactic archaeology, and galaxy/AGN evolution. A medium resolution mode with resolving power of 5000 for 0.71 um to 0.89 um also will be available by simply exchanging dispersers. PFS takes the role for the spectroscopic part of the Subaru Measurement of Images and Redshifts project, while Hyper Suprime-Cam works on the imaging part. To transform the telescope plus WFC focal ratio, a 3-mm thick broad-band coated glass-molded microlens is glued to each fiber tip. A higher transmission fiber is selected for the longest part of cable system, while one with a better FRD performance is selected for the fiber-positioner and fiber-slit components, given the more frequent fiber movements and tightly curved structure. Each Fiber positioner consists of two stages of piezo-electric rotary motors. Its engineering model has been produced and tested. Fiber positioning will be performed iteratively by taking an image of artificially back-illuminated fibers with the Metrology camera located in the Cassegrain container. The camera is carefully designed so that fiber position measurements are unaffected by small amounts of high special-frequency inaccuracies in WFC lens surface shapes. Target light carried through the fiber system reaches one of four identical fast-Schmidt spectrograph modules, each with three arms. Prototype VPH gratings have been optically tested. CCD production is complete, with standard fully-depleted CCDs for red arms and more-challenging thinner fully-depleted CCDs with blue-optimized coating for blue arms.
△ Less
Submitted 12 August, 2014;
originally announced August 2014.
-
Photometric redshifts for supernovae Ia in the Supernova Legacy Survey
Authors:
N. Palanque-Delabrouille,
V. Ruhlmann-Kleider,
S. Pascal,
J. Rich,
J. Guy,
G. Bazin,
P. Astier,
C. Balland,
S. Basa,
R. G. Carlberg,
A. Conley,
D. Fouchez,
D. Hardin,
I. M. Hook,
D. A. Howell,
R. Pain,
K. Perrett,
C. J. Pritchet,
N. Regnault,
M. Sullivan
Abstract:
We present a method using the SALT2 light curve fitter to determine the redshift of Type Ia supernovae in the Supernova Legacy Survey (SNLS) based on their photometry in g', r', i' and z'. On 289 supernovae of the first three years of SNLS data, we obtain a precision $σ_{Δz/(1+z)} = 0.022$ on average up to a redshift of 1.0, with a higher precision of 0.016 for z<0.45 and a lower one of 0.025 for…
▽ More
We present a method using the SALT2 light curve fitter to determine the redshift of Type Ia supernovae in the Supernova Legacy Survey (SNLS) based on their photometry in g', r', i' and z'. On 289 supernovae of the first three years of SNLS data, we obtain a precision $σ_{Δz/(1+z)} = 0.022$ on average up to a redshift of 1.0, with a higher precision of 0.016 for z<0.45 and a lower one of 0.025 for z>0.45. The rate of events with $|Δz|/(1+z)>0.15$ (catastrophic errors) is 1.4%. Both the precision and the rate of catastrophic errors are better than what can be currently obtained using host galaxy photometric redshifts. Photometric redshifts of this precision may be useful for future experiments which aim to discover up to millions of supernovae Ia but without spectroscopy for most of them.
△ Less
Submitted 11 June, 2010; v1 submitted 9 November, 2009;
originally announced November 2009.