-
Green Bank Telescope: Overview and analysis of metrology systems and pointing performance
Authors:
E. White,
F. D. Ghigo,
R. M. Prestage,
D. T. Frayer,
R. J. Maddalena,
P. T. Wallace,
J. J. Brandt,
D. Egan,
J. D. Nelson,
J. Ray
Abstract:
With a 100mx110m off-axis paraboloid dish, the Green Bank Telescope (GBT) is the largest fully steerable radio telescope on Earth. A major challenge facing large ground-based radio telescopes is achieving sufficient pointing accuracy for observing at high frequencies, up to 116 GHz in the case of the GBT. Accurate pointing requires the ability to blindly acquire source locations and perform ad hoc…
▽ More
With a 100mx110m off-axis paraboloid dish, the Green Bank Telescope (GBT) is the largest fully steerable radio telescope on Earth. A major challenge facing large ground-based radio telescopes is achieving sufficient pointing accuracy for observing at high frequencies, up to 116 GHz in the case of the GBT. Accurate pointing requires the ability to blindly acquire source locations and perform ad hoc corrections determined by observing nearby calibrator sources in order to obtain a starting position accurate to within a small margin of error of the target's location. The required pointing accuracy is dependent upon the half-power beamwidth, and for the higher-frequency end of GBT observing, this means that pointing must be accurate to within a few arcseconds RMS. The GBT's off-axis design is advantageous in that it eliminates blockage of the dish and reduces sidelobe interference, and there is no evidence that the resulting asymmetric structure adversely affects pointing accuracy. However, factors such as gravitational flexure, thermal deformation, azimuth track tilt and irregularity, and small misalignments and offset errors within the telescope's structure cause pointing inaccuracies. A pointing model was developed for the GBT to correct for these effects. The model utilizes standard geometrical corrections along with metrology data from the GBT's structural temperature sensors and data from measurements of the track levels. In this paper we provide a summary of the GBT's pointing model and associated corrections, as well as a discussion of relevant metrology systems and an analysis of its current nighttime pointing accuracy.
△ Less
Submitted 24 November, 2021;
originally announced November 2021.
-
Commissioning the HI Observing Mode of the Beamformer for the Cryogenically Cooled Focal L-band Array for the GBT (FLAG)
Authors:
N. M. Pingel,
D. J. Pisano,
M. Ruzindana,
M. Burnett,
K. M. Rajwade,
R. Black,
B. Jeffs,
D. R. Lorimer,
D. Anish Roshi,
R. Prestage,
M. A. McLaughlin,
D. Agarwal,
T. Chamberlin,
L. Hawkins,
L. Jensen,
P. Marganian,
J. D. Nelson,
W. Shillue,
E. Smith,
B. Simon,
V. Van Tonder,
S. White
Abstract:
We present the results of commissioning observations for a new digital beamforming back end for the Focal plane L-band Array for the Robert C. Byrd Green Bank Telescope (FLAG), a cryogenically cooled Phased Array Feed (PAF) with the lowest measured T_sys/eta of any PAF outfitted on a radio telescope to date. We describe the custom software used to apply beamforming weights to the raw element covar…
▽ More
We present the results of commissioning observations for a new digital beamforming back end for the Focal plane L-band Array for the Robert C. Byrd Green Bank Telescope (FLAG), a cryogenically cooled Phased Array Feed (PAF) with the lowest measured T_sys/eta of any PAF outfitted on a radio telescope to date. We describe the custom software used to apply beamforming weights to the raw element covariances to create research quality spectral line images for the new fine-channel mode, study the stability of the beam weights over time, characterize FLAG's sensitivity over a frequency range of 150 MHz, and compare the measured noise properties and observed distribution of neutral hydrogen emission from several extragalactic and Galactic sources with data obtained with the current single-pixel L-band receiver. These commissioning runs establish FLAG as the preeminent PAF receiver currently available for spectral line observations on the world's major radio telescopes.
△ Less
Submitted 25 January, 2021;
originally announced January 2021.
-
Performance of a highly sensitive, 19-element, dual-polarization, cryogenic L-band Phased Array Feed on the Green Bank Telescope
Authors:
D. Anish Roshi,
W. Shillue,
B. Simon,
K. F. Warnick,
B. Jeffs,
D. J. Pisano,
R. Prestage,
S. White,
J. R. Fisher,
M. Morgan,
R. Black,
M. Burnett,
J. Diao,
M. Ruzindana,
V. van Tonder,
L. Hawkins,
P. Marganian,
T. Chamberlin,
J. Ray,
N. M. Pingel,
K. Rajwade,
D. R. Lorimer,
A. Rane,
J. Castro,
W. Groves
, et al. (4 additional authors not shown)
Abstract:
A new 1.4 GHz 19-element, dual-polarization, cryogenic phased array feed (PAF) radio astronomy receiver has been developed for the Robert C. Byrd Green Bank Telescope (GBT) as part of FLAG (Focal L-band Array for the GBT) project. Commissioning observations of calibrator radio sources show that this receiver has the lowest reported beamformed system temperature ($T_{\rm sys}$) normalized by apertu…
▽ More
A new 1.4 GHz 19-element, dual-polarization, cryogenic phased array feed (PAF) radio astronomy receiver has been developed for the Robert C. Byrd Green Bank Telescope (GBT) as part of FLAG (Focal L-band Array for the GBT) project. Commissioning observations of calibrator radio sources show that this receiver has the lowest reported beamformed system temperature ($T_{\rm sys}$) normalized by aperture efficiency ($η$) of any phased array receiver to date. The measured $T_{\rm sys}/η$ is $25.4 \pm 2.5$ K near 1350 MHz for the boresight beam, which is comparable to the performance of the current 1.4 GHz cryogenic single feed receiver on the GBT. The degradation in $T_{\rm sys}/η$ at $\sim$ 4 arcmin (required for Nyquist sampling) and $\sim$ 8 arcmin offsets from the boresight is, respectively, $\sim$ 1\% and $\sim$ 20\% of the boresight value. The survey speed of the PAF with seven formed beams is larger by a factor between 2.1 and 7 compared to a single beam system depending on the observing application. The measured performance, both in frequency and offset from boresight, qualitatively agree with predictions from a rigorous electromagnetic model of the PAF. The astronomical utility of the receiver is demonstrated by observations of the pulsar B0329+54 and an extended HII region, the Rosette Nebula. The enhanced survey speed with the new PAF receiver will enable the GBT to carry out exciting new science, such as more efficient observations of diffuse, extended neutral hydrogen emission from galactic in-flows and searches for Fast Radio Bursts.
△ Less
Submitted 12 March, 2018;
originally announced March 2018.
-
A Highly-Sensitive Cryogenic Phased Array Feed for the Green Bank Telescope
Authors:
D. Anish Roshi,
W. Shillue,
J. R. Fisher,
M. Morgan,
J. Castro,
W. Groves,
T. Boyd,
B. Simon,
L. Hawkins,
V. van Tonder,
J. D. Nelson,
J. Ray,
T. Chamberlain,
S. White,
R. Black,
K. F. Warnick,
B. Jeffs,
R. Prestage
Abstract:
In this paper, we describe the development of a new L-band (1.4 GHz) Cryogenic Phased Array Feed (PAF) system, referred to as the GBT2 array. Results from initial measurements made with the GBT2 array are also presented. The PAF was developed for the Green Bank Telescope (GBT) as part of the Focal L-band Array for the GBT (FLAG) project. During the first stage of the development work (Phase I), a…
▽ More
In this paper, we describe the development of a new L-band (1.4 GHz) Cryogenic Phased Array Feed (PAF) system, referred to as the GBT2 array. Results from initial measurements made with the GBT2 array are also presented. The PAF was developed for the Green Bank Telescope (GBT) as part of the Focal L-band Array for the GBT (FLAG) project. During the first stage of the development work (Phase I), a prototype cryogenic 19 element dual-polarized array with "Kite" dipole elements was developed and tested on the GBT. The measured system temperature over efficiency ($T_{sys}/η$) ratio for the bore sight beam of the Kite array was 45.5 K at 1.55 GHz. The off-boresight $T_{sys}/η$ shows an increase by 13 K at an offset equal to the half power beam width (7$^{'}$.2 at 1.7 GHz). Our measurements indicate that the off-boresight degradation and field-of-view (FoV) limitation of the Kite array is simply due to the fixed array size. To increase the FoV, a new 19-element GBT2 array with larger array spacing was developed during FLAG Phase II. The frequency response of the array was optimized from 1.2 to 1.6 GHz. A system with larger cryostat, new low noise amplifiers (LNAs), down-conversion and digitization close to the front end, unformatted digital transmission over fiber, ROACH II based polyphase filter banks (PFBs) with bandwidth 150 MHz and a data acquisition system that records voltage samples from one of the PFB channels were all developed. The data presented here is processed off-line. The receiver temperature measured with the new system is 17 K at 1.4 GHz, an improvement $>$ 8 K over the previous Kite array. Measurements with the GBT2 array on the telescope are in progress. A real time 150 MHz beamformer is also being developed as part of an NSF-funded collaboration between NRAO/GBO/BYU \& West Virginia University (Beamformer Project) to support science observations.
△ Less
Submitted 6 November, 2017;
originally announced November 2017.
-
Holographic Measurement and Improvement of the Green Bank Telescope Surface
Authors:
Todd R. Hunter,
Frederic R. Schwab,
Steven D. White,
John M. Ford,
Frank D. Ghigo,
Ronald J. Maddalena,
Brian S. Mason,
Jack D. Nelson,
Richard M. Prestage,
Jason Ray,
Paul Ries,
Robert Simon,
Sivasankaran Srikanth,
Peter Whiteis
Abstract:
We describe the successful design, implementation, and operation of a 12 GHz holography system installed on the Robert C. Byrd Green Bank Telescope (GBT). We have used a geostationary satellite beacon to construct high-resolution holographic images of the telescope mirror surface irregularities. These images have allowed us to infer and apply improved position offsets for the 2209 actuators which…
▽ More
We describe the successful design, implementation, and operation of a 12 GHz holography system installed on the Robert C. Byrd Green Bank Telescope (GBT). We have used a geostationary satellite beacon to construct high-resolution holographic images of the telescope mirror surface irregularities. These images have allowed us to infer and apply improved position offsets for the 2209 actuators which control the active surface of the primary mirror, thereby achieving a dramatic reduction in the total surface error (from 390 microns to ~240 microns, rms). We have also performed manual adjustments of the corner offsets for a few panels. The expected improvement in the radiometric aperture efficiency has been rigorously modeled and confirmed at 43 GHz and 90 GHz. The improvement in the telescope beam pattern has also been measured at 11.7 GHz with greater than 60 dB of dynamic range. Symmetric features in the beam pattern have emerged which are consistent with a repetitive pattern in the aperture due to systematic panel distortions. By computing average images for each tier of panels from the holography images, we confirm that the magnitude and direction of the panel distortions, in response to the combination of gravity and thermal gradients, are in general agreement with finite-element model predictions. The holography system is now fully integrated into the GBT control system, and by enabling the telescope staff to monitor the health of the individual actuators, it continues to be an essential tool to support high-frequency observations.
△ Less
Submitted 11 July, 2011;
originally announced July 2011.
