-
4K$\times$4K CCD Imager for the 3.6m DOT: Recent up-gradations and results
Authors:
S. B. Pandey,
Amit Kumar,
B. K. Reddy,
S. Yadav,
N. Nanjappa,
Amar Aryan,
Rahul Gupta,
Neelam Panwar,
R. K. S. Yadav
Abstract:
The 4K$\times$4K CCD Imager is the first light instrument for the 3.6m Devasthal Optical Telescope and is producing broad-band imaging observations of many Galactic and extra-galactic sources since 2015-2016. Capabilities of the CCD Imager are demonstrated recently through several publications using the well-calibrated multi-band deep photometric results as expected from other similar facilities g…
▽ More
The 4K$\times$4K CCD Imager is the first light instrument for the 3.6m Devasthal Optical Telescope and is producing broad-band imaging observations of many Galactic and extra-galactic sources since 2015-2016. Capabilities of the CCD Imager are demonstrated recently through several publications using the well-calibrated multi-band deep photometric results as expected from other similar facilities globally. In this article, we summarize some of the recent up-gradations made to improve the Imager, i.e., mounting the new filter wheel casing, replacing stray light baffles and discussing the fringe pattern corrections in redder filters. Some of the new science initiatives like galaxy-embedded faint point sources including WR stars and the observations of low surface brightness galaxy clusters are also discussed.
△ Less
Submitted 23 June, 2023;
originally announced June 2023.
-
TIRCAM2 Camera Interface on the Side port of the 3.6 meter Devasthal Optical Telescope
Authors:
Shailesh B. Bhagat,
Milind B. Naik,
Satheesha S. Poojary,
Harshit Shah,
Rajesh B. Jadhav,
Balu G. Bagade,
Savio L. D'Costa,
B. Krishna Reddy,
Nadish Nanjappa,
Tarun Bangia,
Devendra K. Ojha,
Saurabh Sharma,
Koshvendra Singh
Abstract:
The TIFR Near Infrared Imaging Camera-II (TIRCAM2) is being used at the 3.6 m Devasthal Optical Telescope (DOT) operated by Aryabhatta Research Institute of Observational Sciences (ARIES), Nainital, Uttarakhand, India. Earlier, the TIRCAM2 was used at the main port of the DOT on time shared basis. It has now been installed at the side port of the telescope. Side port installation allows near simul…
▽ More
The TIFR Near Infrared Imaging Camera-II (TIRCAM2) is being used at the 3.6 m Devasthal Optical Telescope (DOT) operated by Aryabhatta Research Institute of Observational Sciences (ARIES), Nainital, Uttarakhand, India. Earlier, the TIRCAM2 was used at the main port of the DOT on time shared basis. It has now been installed at the side port of the telescope. Side port installation allows near simultaneous observations with the main port instrument as well as longer operating periods. Thus, the TIRCAM2 serves the astronomical community for a variety of observations ranging from lunar occultations, transient events and normal scheduled observations.
△ Less
Submitted 1 April, 2023;
originally announced April 2023.
-
TANSPEC: TIFR-ARIES Near Infrared Spectrometer
Authors:
Saurabh Sharma,
Devendra K. Ojha,
Arpan Ghosh,
Joe P. Ninan,
Supriyo Ghosh,
Swarna K. Ghosh,
P. Manoj,
Milind B. Naik,
Savio L. A. D'Costa,
B. Krishna Reddy,
Nandish Nanjappa,
Rakesh Pandey,
Tirthendu Sinha,
Neelam Panwar,
Susmitha Antony,
Harmeen Kaur,
Sanjit Sahu,
Tarun Bangia,
Satheesha S. Poojary,
Rajesh B. Jadhav,
Shailesh B. Bhagat,
Ganesh S. Meshram,
Harshit Shah,
John T. Rayner,
Douglas W. Toomey
, et al. (1 additional authors not shown)
Abstract:
We present the design and performance of the TANSPEC, a medium-resolution $0.55-2.5~μ$m cryogenic spectrometer and imager, now in operation at the 3.6-m Devasthal Optical Telescope (DOT), Nainital, India. The TANSPEC provides three modes of operation which include, photometry with broad- and narrow-band filters, spectroscopy with short slits of 20$^{\prime \prime}$ length and different widths (fro…
▽ More
We present the design and performance of the TANSPEC, a medium-resolution $0.55-2.5~μ$m cryogenic spectrometer and imager, now in operation at the 3.6-m Devasthal Optical Telescope (DOT), Nainital, India. The TANSPEC provides three modes of operation which include, photometry with broad- and narrow-band filters, spectroscopy with short slits of 20$^{\prime \prime}$ length and different widths (from 0.5$^{\prime \prime}$ to 4.0$^{\prime \prime}$) in cross-dispersed mode at a resolving power R of $\sim$2750, and spectroscopy with long slits of 60$^{\prime \prime}$ length and different widths (from 0.5$^{\prime \prime}$ to 4.0$^{\prime \prime}$) in prism mode at a resolving power R of $\sim$100-350. TANSPEC's imager mode provides a field of view of 60$^{\prime \prime} \times 60^{\prime \prime}$ with a plate scale of 0.245$^{\prime \prime}$/pixel on the 3.6-m DOT. The TANSPEC was successfully commissioned during April-May 2019 and the subsequent characterization and astronomical observations are presented here. The TANSPEC has been made available to the worldwide astronomical community for science observations from October 2020.
△ Less
Submitted 16 July, 2022;
originally announced July 2022.
-
Photometric calibrations and characterization of the 4K$\times$4K CCD Imager, the first-light axial port instrument for the 3.6m DOT
Authors:
Amit Kumar,
S. B. Pandey,
Avinash Singh,
R. K. S. Yadav,
B. K. Reddy,
N. Nanjappa,
S. Yadav,
R. Srinivasan
Abstract:
In the present work, recent characterization results of the 4K$\times$4K CCD Imager (a first light instrument of the 3.6m Devasthal Optical Telescope; DOT) and photometric calibrations are discussed, along with measurements of the extinction coefficients and sky brightness values at the location of the 3.6m DOT site based on the imaging data taken between 2016 and 2021. For the 4K$\times$4K CCD Im…
▽ More
In the present work, recent characterization results of the 4K$\times$4K CCD Imager (a first light instrument of the 3.6m Devasthal Optical Telescope; DOT) and photometric calibrations are discussed, along with measurements of the extinction coefficients and sky brightness values at the location of the 3.6m DOT site based on the imaging data taken between 2016 and 2021. For the 4K$\times$4K CCD Imager, all given combinations of gains (1, 2, 3, 5, and 10 e$^-$/ADU) and readout noise values for the three readout speeds (100 kHz, 500 kHz, and 1 MHz) are verified using the sky flats and bias frames taken during early 2021; measured values resemble well with the theoretical ones. Using color-color and color-magnitude transformation equations, color coefficients ($α$) and zero-points ($β$) are determined to constrain and examine their long-term consistencies and any possible evolution based on $UBVRI$ observations of several Landolt standard fields observed during 2016-2021. Our present analysis exhibits consistency among estimated $α$ values within the 1$σ$ and does not show any noticeable trend with time. We also found that the photometric errors and limiting magnitudes computed using the CCD Imager data follow the simulated ones published earlier. The average extinction coefficients, their seasonal variations, and zenith night-sky brightness values for the moon-less nights for all ten Bessell and SDSS filters are also estimated and found comparable to those reported for other good astronomical sites.
△ Less
Submitted 30 May, 2022; v1 submitted 25 November, 2021;
originally announced November 2021.
-
VR CCD photometry of variable stars in globular cluster NGC 4147
Authors:
Sneh Lata,
A. K. Pandey,
J. C. Pandey,
R. K. S. Yadav,
Shashi B. Pandey,
Aashish Gupta,
Tarun Bangia,
Hum Chand,
Mukesh K. Jaiswar,
Yogesh C. Joshi,
Mohit Joshi,
Brijesh Kumar,
T. S. Kumar,
Biman J. Medhi,
Kuntal Misra,
Nandish Nanjappa,
Jaysreekar Pant,
Purushottam,
B. Krishna Reddy,
Sanjeet Sahu,
Saurabh Sharma,
Wahab Uddin,
Shobhit Yadav
Abstract:
We present results of a search for variable stars in a region of the globular cluster NGC 4147 based on photometric observations with 4k x 4k CCD imager mounted at the axial port of the recently installed 3.6 m Devasthal optical telescope at Aryabhatta Research Institute of Observational Sciences, Nainital, India. We performed time series photometry of NGC 4147 in V and R bands, and identified 42…
▽ More
We present results of a search for variable stars in a region of the globular cluster NGC 4147 based on photometric observations with 4k x 4k CCD imager mounted at the axial port of the recently installed 3.6 m Devasthal optical telescope at Aryabhatta Research Institute of Observational Sciences, Nainital, India. We performed time series photometry of NGC 4147 in V and R bands, and identified 42 periodic variables in the region of NGC 4147, 28 of which have been detected for the first time. Seventeen variable stars are located within the half light radius $\lesssim$ 0.48 arcmin, of which 10 stars are newly identified variables. Two of 10 variables are located within the core radius $\lesssim$ 0.09 arcmin. Based on the location in the $V/(V-R)$ colour magnitude diagram and variability characteristics, 7, 8, 5 and 1 newly identified probable member variables are classified as RRc, EA/E, EW and SX Phe, respectively. The metallicity of NGC 4147 estimated from light curves of RRab and RRc stars with the help of Fourier decomposition is found to be characteristics of Oosterhoff II. The distance derived using light curves of RRab stars is consistent with that obtained from the observed $V/(V-R)$ colour-magnitude diagram.
△ Less
Submitted 20 May, 2019;
originally announced May 2019.
-
First-light instrument for the 3.6m DOT: 4Kx4K CCD Imager
Authors:
S. B. Pandey,
R. K. S. Yadav,
Nandish Nanjappa,
Shobhit Yadav,
B. Krishna Reddey,
Sanjeet Sahu,
R. Srinivasan
Abstract:
As an in-house instrument developmental activity at ARIES, the 4Kx4K CCD Imager is designed and developed as a first-light instrument for the axial port of the 3.6m DOT. The f/9 beam of the telescope having a plate-scale of ~ 6.4 arc-sec/mm is utilized to conduct deeper photometry within the central 10 arc-min field of view. The pixel size of the blue-enhanced liquid Nitrogen cooled STA4150 4Kx4K…
▽ More
As an in-house instrument developmental activity at ARIES, the 4Kx4K CCD Imager is designed and developed as a first-light instrument for the axial port of the 3.6m DOT. The f/9 beam of the telescope having a plate-scale of ~ 6.4 arc-sec/mm is utilized to conduct deeper photometry within the central 10 arc-min field of view. The pixel size of the blue-enhanced liquid Nitrogen cooled STA4150 4Kx4K CCD chip is 15 micron, with options to select gain and speed values to utilize the dynamic range. Using the Imager, it is planned to image the central ~ 6.5x6.5 arc-min^2 field of view of the telescope for various science goals by getting deeper images in several broad-band filters for point sources and objects with low surface brightness. The fully assembled Imager along with automated filter wheels having Bessel UBVRI and SDSS ugriz filters was tested in late 2015 at the axial port of the 3.6m DOT. This instrument was finally mounted at the axial port of the 3.6m DOT on 30th March 2016 when the telescope was technically activated jointly by the Prime Ministers of India and Belgium. This instrument is expected to serve as a general purpose multi-band deep imaging instrument for variety of science goals including studies of cosmic transients, active galaxies, star clusters and optical monitoring of X-ray sources discovered by the newly launched Indian space-mission called ASTROSAT and follow-up of radio bright objects discovered by the GMRT.
△ Less
Submitted 15 November, 2017;
originally announced November 2017.