Showing 1–36 of 36 results for author: Morgan, M

JWST/NIRCam 4-5 $μ$m Imaging of the Giant Planet AF Lep b

Authors: Kyle Franson, William O. Balmer, Brendan P. Bowler, Laurent Pueyo, Yifan Zhou, Emily Rickman, Zhoujian Zhang, Sagnick Mukherjee, Tim D. Pearce, Daniella C. Bardalez Gagliuffi, Lauren I. Biddle, Timothy D. Brandt, Rachel Bowens-Rubin, Justin R. Crepp, James W. Davidson, Jr., Jacqueline Faherty, Christian Ginski, Elliott P. Horch, Marvin Morgan, Caroline V. Morley, Marshall D. Perrin, Aniket Sanghi, Maissa Salama, Christopher A. Theissen, Quang H. Tran , et al. (1 additional authors not shown)

Abstract: With a dynamical mass of $3 \, M_\mathrm{Jup}$, the recently discovered giant planet AF Lep b is the lowest-mass imaged planet with a direct mass measurement. Its youth and spectral type near the L/T transition make it a promising target to study the impact of clouds and atmospheric chemistry at low surface gravities. In this work, we present JWST/NIRCam imaging of AF Lep b. Across two epochs, we… ▽ More With a dynamical mass of $3 \, M_\mathrm{Jup}$, the recently discovered giant planet AF Lep b is the lowest-mass imaged planet with a direct mass measurement. Its youth and spectral type near the L/T transition make it a promising target to study the impact of clouds and atmospheric chemistry at low surface gravities. In this work, we present JWST/NIRCam imaging of AF Lep b. Across two epochs, we detect AF Lep b in F444W ($4.4 \, \mathrm{μm}$) with S/N ratios of 9.6 and 8.7, respectively. At the planet's separation of $320 \, \mathrm{mas}$ during the observations, the coronagraphic throughput is ${\approx}7\%$, demonstrating that NIRCam's excellent sensitivity persists down to small separations. The F444W photometry of AF Lep b affirms the presence of disequilibrium carbon chemistry and enhanced atmospheric metallicity. These observations also place deep limits on wider-separation planets in the system, ruling out $1.1 \, M_\mathrm{Jup}$ planets beyond $15.6 \, \mathrm{au}$ (0.58 arcsec), $1.1 \, M_\mathrm{Sat}$ planets beyond $27 \, \mathrm{au}$ (1 arcsec), and $2.8 \, M_\mathrm{Nep}$ planets beyond $67 \, \mathrm{au}$ (2.5 arcsec). We also present new Keck/NIRC2 $L'$ imaging of AF Lep b; combining this with the two epochs of F444W photometry and previous Keck $L'$ photometry provides limits on the long-term 3-$5 \, \mathrm{μm}$ variability of AF Lep b on months-to-years timescales. AF Lep b is the closest-separation planet imaged with JWST to date, demonstrating that planets can be recovered well inside the nominal (50% throughput) NIRCam coronagraph inner working angle. △ Less

Submitted 13 June, 2024; originally announced June 2024.

Comments: 17 pages, 4 figures, submitted to ApJL

Potential Melting of Extrasolar Planets by Tidal Dissipation

Authors: Darryl Z. Seligman, Adina D. Feinstein, Dong Lai, Luis Welbanks, Aster G. Taylor, Juliette Becker, Fred C. Adams, Marvin Morgan, Jennifer B. Bergner

Abstract: Tidal heating on Io due to its finite eccentricity was predicted to drive surface volcanic activity, which was subsequently confirmed by the $\textit{Voyager}$ spacecrafts. Although the volcanic activity in Io is more complex, in theory volcanism can be driven by runaway melting in which the tidal heating increases as the mantle thickness decreases. We show that this runaway melting mechanism is g… ▽ More Tidal heating on Io due to its finite eccentricity was predicted to drive surface volcanic activity, which was subsequently confirmed by the $\textit{Voyager}$ spacecrafts. Although the volcanic activity in Io is more complex, in theory volcanism can be driven by runaway melting in which the tidal heating increases as the mantle thickness decreases. We show that this runaway melting mechanism is generic for a composite planetary body with liquid core and solid mantle, provided that (i) the mantle rigidity, $μ$, is comparable to the central pressure, i.e. $μ/ (ρg R_{\rm P})\gtrsim0.1$ for a body with density $ρ$, surface gravitational acceleration $g$, and radius $R_{\rm P}$, (ii) the surface is not molten, (iii) tides deposit sufficient energy, and (iv) the planet has nonzero eccentricity. We calculate the approximate liquid core radius as a function of $μ/ (ρg R_{\rm P})$, and find that more than $90\%$ of the core will melt due to this runaway for $μ/ (ρg R_{\rm P})\gtrsim1$. From all currently confirmed exoplanets, we find that the terrestrial planets in the L98-59 system are the most promising candidates for sustaining active volcanism. However, uncertainties regarding the quality factors and the details of tidal heating and cooling mechanisms prohibit definitive claims of volcanism on any of these planets. We generate synthetic transmission spectra of these planets assuming Venus-like atmospheric compositions with an additional 5, 50, and $98\%$ SO$_2$ component, which is a tracer of volcanic activity. We find a $\gtrsim 3 σ$ preference for a model with SO$_2$ with 5-10 transits with $\textit{JWST}$ for L98-59bcd. △ Less

Submitted 2 November, 2023; originally announced November 2023.

Comments: 16 pages, 8 Figures, accepted for publication in ApJ

Signs of Similar Stellar Obliquity Distributions for Hot and Warm Jupiters Orbiting Cool Stars

Authors: Marvin Morgan, Brendan P. Bowler, Quang H. Tran, Erik Petigura, Vighnesh Nagpal, Sarah Blunt

Abstract: Transiting giant planets provide a natural opportunity to examine stellar obliquities, which offer clues about the origin and dynamical histories of close-in planets. Hot Jupiters orbiting Sun-like stars show a tendency for obliquity alignment, which suggests that obliquities are rarely excited or that tidal realignment is common. However, the stellar obliquity distribution is less clear for giant… ▽ More Transiting giant planets provide a natural opportunity to examine stellar obliquities, which offer clues about the origin and dynamical histories of close-in planets. Hot Jupiters orbiting Sun-like stars show a tendency for obliquity alignment, which suggests that obliquities are rarely excited or that tidal realignment is common. However, the stellar obliquity distribution is less clear for giant planets at wider separations where realignment mechanisms are not expected to operate. In this work, we uniformly derive line-of-sight inclinations for 47 cool stars ($T_\mathrm{eff}$ $<$ 6200 K) harboring transiting hot and warm giant planets by combining rotation periods, stellar radii, and $v \sin i$ measurements. Among the systems that show signs of spin-orbit misalignment in our sample, three are identified as being misaligned here for the first time. Of particular interest are Kepler-1654, one of the longest-period (1047 d; 2.0 AU) giant planets in a misaligned system, and Kepler-30, a multi-planet misaligned system. By comparing the reconstructed underlying inclination distributions, we find that the inferred minimum misalignment distributions of hot Jupiters spanning $a/R_{*}$ = 3-20 ($\approx$ 0.01-0.1 AU) and warm Jupiters spanning $a/R_{*}$ = 20-400 ($\approx$ 0.1-1.9 AU) are in good agreement. With 90$\%$ confidence, at least 24$^{+9}_{-7}\%$ of warm Jupiters and 14$^{+7}_{-5}\%$ of hot Jupiters around cool stars are misaligned by at least 10$^\circ$. Most stars harboring warm Jupiters are therefore consistent with spin-orbit alignment. The similarity of hot and warm Jupiter misalignment rates suggests that either the occasional misalignments are primordial and originate in misaligned disks, or the same underlying processes that create misaligned hot Jupiters also lead to misaligned warm Jupiters. △ Less

Submitted 27 October, 2023; originally announced October 2023.

Comments: AJ, accepted

Millimeter-Wave Reflectionless Filters Using Advanced Thin-Film Fabrication

Authors: Matthew Morgan, Seng Loo, Tod Boyd, Miho Hunter

Abstract: We report on the development of millimeter-wave, lumped-element reflectionless filters using an advanced thin-film fabrication process. Based on previously demonstrated circuit topologies capable of achieving 50Ω impedance match at all frequencies, these circuits have been implemented at higher frequencies than ever before by leveraging a thin-film process with better than 2 μm feature size and in… ▽ More We report on the development of millimeter-wave, lumped-element reflectionless filters using an advanced thin-film fabrication process. Based on previously demonstrated circuit topologies capable of achieving 50Ω impedance match at all frequencies, these circuits have been implemented at higher frequencies than ever before by leveraging a thin-film process with better than 2 μm feature size and integrated elements such as SiN Metal-Insulator-Metal (MIM) capacitors, bridges, and TaN Thin-Film Resistors (TFRs). △ Less

Submitted 4 July, 2023; originally announced July 2023.

Comments: 6 pages, 7 figure, to be submitted

Astrometric Accelerations as Dynamical Beacons: A Giant Planet Imaged Inside the Debris Disk of the Young Star AF Lep

Authors: Kyle Franson, Brendan P. Bowler, Yifan Zhou, Tim D. Pearce, Daniella C. Bardalez Gagliuffi, Lauren Biddle, Timothy D. Brandt, Justin R. Crepp, Trent J. Dupuy, Jacqueline Faherty, Rebecca Jensen-Clem, Marvin Morgan, Aniket Sanghi, Christopher A. Theissen, Quang H. Tran, Trevor A. Wolf

Abstract: We present the direct imaging discovery of a giant planet orbiting the young star AF Lep, a 1.2 $M_{\odot}$ member of the 24 $\pm$ 3 Myr $β$ Pic moving group. AF Lep was observed as part of our ongoing high-contrast imaging program targeting stars with astrometric accelerations between Hipparcos and Gaia that indicate the presence of substellar companions. Keck/NIRC2 observations in $L'$ with the… ▽ More We present the direct imaging discovery of a giant planet orbiting the young star AF Lep, a 1.2 $M_{\odot}$ member of the 24 $\pm$ 3 Myr $β$ Pic moving group. AF Lep was observed as part of our ongoing high-contrast imaging program targeting stars with astrometric accelerations between Hipparcos and Gaia that indicate the presence of substellar companions. Keck/NIRC2 observations in $L'$ with the Vector Vortex Coronagraph reveal a point source, AF Lep b, at ${\approx}340$ mas which exhibits orbital motion at the 6-$σ$ level over the course of 13 months. A joint orbit fit yields precise constraints on the planet's dynamical mass of 3.2$^{+0.7}_{-0.6}$ $M_\mathrm{Jup}$, semi-major axis of $8.4^{+1.1}_{-1.3}$ au, and eccentricity of $0.24^{+0.27}_{-0.15}$. AF Lep hosts a debris disk located at $\sim$50 au, but it is unlikely to be sculpted by AF Lep b, implying there may be additional planets in the system at wider separations. The stellar inclination ($i_* = 54^{+11}_{-9} {}^\circ$) and orbital inclination ($i_o = 50^{+9}_{-12} {}^\circ$) are in good agreement, which is consistent with the system having spin-orbit alignment. AF Lep b is the lowest-mass imaged planet with a dynamical mass measurement and highlights the promise of using astrometric accelerations as a tool to find and characterize long-period planets. △ Less

Submitted 25 May, 2023; v1 submitted 10 February, 2023; originally announced February 2023.

Comments: 14 pages, 3 figures, accepted to ApJL

Rotation Periods, Inclinations, and Obliquities of Cool Stars Hosting Directly Imaged Substellar Companions: Spin-Orbit Misalignments are Common

Authors: Brendan P. Bowler, Quang H. Tran, Zhoujian Zhang, Marvin Morgan, Katelyn B. Ashok, Sarah Blunt, Marta L. Bryan, Analis E. Evans, Kyle Franson, Daniel Huber, Vighnesh Nagpal, Ya-Lin Wu, Yifan Zhou

Abstract: The orientation between a star's spin axis and a planet's orbital plane provides valuable information about the system's formation and dynamical history. For non-transiting planets at wide separations, true stellar obliquities are challenging to measure, but lower limits on spin-orbit orientations can be determined from the difference between the inclination of the star's rotational axis and the c… ▽ More The orientation between a star's spin axis and a planet's orbital plane provides valuable information about the system's formation and dynamical history. For non-transiting planets at wide separations, true stellar obliquities are challenging to measure, but lower limits on spin-orbit orientations can be determined from the difference between the inclination of the star's rotational axis and the companion's orbital plane ($Δi$). We present results of a uniform analysis of rotation periods, stellar inclinations, and obliquities of cool stars (SpT $\gtrsim$ F5) hosting directly imaged planets and brown dwarf companions. As part of this effort, we have acquired new $v \sin i_*$ values for 22 host stars with the high-resolution Tull spectrograph at the Harlan J. Smith telescope. Altogether our sample contains 62 host stars with rotation periods, most of which are newly measured using light curves from the Transiting Exoplanet Survey Satellite. Among these, 53 stars have inclinations determined from projected rotational and equatorial velocities, and 21 stars predominantly hosting brown dwarfs have constraints on $Δi$. Eleven of these (52$^{+10}_{-11}$% of the sample) are likely misaligned, while the remaining ten host stars are consistent with spin-orbit alignment. As an ensemble, the minimum obliquity distribution between 10-250 AU is more consistent with a mixture of isotropic and aligned systems than either extreme scenario alone--pointing to direct cloud collapse, formation within disks bearing primordial alignments and misalignments, or architectures processed by dynamical evolution. This contrasts with stars hosting directly imaged planets, which show a preference for low obliquities. These results reinforce an emerging distinction between the orbits of long-period brown dwarfs and giant planets in terms of their stellar obliquities and orbital eccentricities. △ Less

Submitted 11 January, 2023; originally announced January 2023.

Comments: AJ, accepted

Changing spatial distribution of water flow charts major change in Mars' greenhouse effect

Authors: Edwin S. Kite, Michael A. Mischna, Bowen Fan, Alexander M. Morgan, Sharon A. Wilson, Mark I. Richardson

Abstract: Early Mars had rivers, but the cause of Mars' wet-to-dry transition remains unknown. Past climate on Mars can be probed using the spatial distribution of climate-sensitive landforms. We analyzed global databases of water-worked landforms and identified changes in the spatial distribution of rivers over time. These changes are simply explained by comparison to a simplified meltwater model driven by… ▽ More Early Mars had rivers, but the cause of Mars' wet-to-dry transition remains unknown. Past climate on Mars can be probed using the spatial distribution of climate-sensitive landforms. We analyzed global databases of water-worked landforms and identified changes in the spatial distribution of rivers over time. These changes are simply explained by comparison to a simplified meltwater model driven by an ensemble of global climate model simulations, as the result of $\gtrsim$10 K global cooling, from global average surface temperature (T) $\ge$ 268 K to T $\sim$ 258 K, due to a weaker greenhouse effect. In other words, river-forming climates on Early Mars were warm and wet first, and cold and wet later. Surprisingly, analysis of the greenhouse effect within our ensemble of global climate model simulations suggests that this shift was primarily driven by waning non-CO2 radiative forcing, and not changes in CO2 radiative forcing. △ Less

Submitted 31 May, 2022; originally announced June 2022.

Journal ref: Science Advances 8(21), (2022)

The Timing of Alluvial Fan Formation on Mars

Authors: Samuel J. Holo, Edwin S. Kite, Sharon A. Wilson, Alexander M. Morgan

Abstract: The history of rivers on Mars is an important constraint on Martian climate evolution. The timing of relatively young, alluvial fan-forming rivers is especially important, as Mars' Amazonian atmosphere is thought to have been too thin to consistently support surface liquid water. Previous regional studies suggested that alluvial fans formed primarily between the Early Hesperian and the Early Amazo… ▽ More The history of rivers on Mars is an important constraint on Martian climate evolution. The timing of relatively young, alluvial fan-forming rivers is especially important, as Mars' Amazonian atmosphere is thought to have been too thin to consistently support surface liquid water. Previous regional studies suggested that alluvial fans formed primarily between the Early Hesperian and the Early Amazonian. In this study, we describe how a combination of a global impact crater database, a global geologic map, a global alluvial fan database, and statistical models can be used to estimate the timing of alluvial fan formation across Mars. Using our global approach and improved statistical modeling, we find that alluvial fan formation likely persisted into the last ~2.5 Gyr, well into the Amazonian period. However, the data we analyzed was insufficient to place constraints on the duration of alluvial fan formation. Going forward, more crater data will enable tighter constraints on the parameters estimated in our models and thus further inform our understanding of Mars' climate evolution. △ Less

Submitted 11 September, 2021; originally announced September 2021.

Comments: Accepted by The Planetary Science Journal

Collisional Growth Within the Solar System's Primordial Planetesimal Disk and the Timing of the Giant Planet Instability

Authors: Marvin Morgan, Darryl Seligman, Konstantin Batygin

Abstract: The large scale structure of the Solar System has been shaped by a transient dynamical instability that may have been triggered by the interaction of the giants planets with a massive primordial disk of icy debris. In this work, we investigate the conditions under which this primordial disk could have coalesced into planets using analytic and numerical calculations. In particular, we perform numer… ▽ More The large scale structure of the Solar System has been shaped by a transient dynamical instability that may have been triggered by the interaction of the giants planets with a massive primordial disk of icy debris. In this work, we investigate the conditions under which this primordial disk could have coalesced into planets using analytic and numerical calculations. In particular, we perform numerical simulations of the Solar System's early dynamical evolution that account for the viscous stirring and collisional damping within the disk. We demonstrate that if collisional damping would have been sufficient to maintain a temperate velocity dispersion, Earth mass trans-Neptunian planets could have emerged within a timescale of 10 Myr. Therefore, our results favor a scenario wherein the dynamical instability of the outer Solar System began immediately upon the dissipation of the gaseous nebula to avoid the overproduction of Earth mass planets in the outer Solar System. △ Less

Submitted 21 July, 2021; originally announced July 2021.

Comments: 8 pages, 4 figures, 1 table, accepted for publication in ApJL

A High Spectral Resolution Study of the Soft X-ray Background with the X-ray Quantum Calorimeter

Authors: Dallas Wulf, Megan E Eckart, Massimiliano Galeazzi, Felix Jaeckel, Richard L Kelley, Caroline A Kilbourne, Kelsey M Morgan, Dan McCammon, F Scott Porter, Andrew E Szymkowiak

Abstract: We present here a combined analysis of four high spectral resolution observations of the Diffuse X-ray Background (DXRB), made using the University of Wisconsin-Madison/Goddard Space Flight Center X-ray Quantum Calorimeter (XQC) sounding rocket payload. The observed spectra support the existence of a $\sim0.1~$keV Local Hot Bubble and a $\sim0.2~$keV Hot Halo, with discrepancies between repeated o… ▽ More We present here a combined analysis of four high spectral resolution observations of the Diffuse X-ray Background (DXRB), made using the University of Wisconsin-Madison/Goddard Space Flight Center X-ray Quantum Calorimeter (XQC) sounding rocket payload. The observed spectra support the existence of a $\sim0.1~$keV Local Hot Bubble and a $\sim0.2~$keV Hot Halo, with discrepancies between repeated observations compatible with expected contributions of time-variable emission from Solar Wind Charge Exchange (SWCX). An additional component of $\sim0.9~$keV emission observed only at low galactic latitudes can be consistently explained by unresolved dM stars. △ Less

Submitted 16 September, 2019; originally announced September 2019.

Comments: 21 pages, 6 figures, accepted for publication in ApJ

Journal ref: ApJ 884 120 (2019)

Reflectionless Filters for Generalized Transmission Functions

Authors: Augusto Guilabert, Matthew Morgan, Tod Boyd

Abstract: Single-ended circuit topologies, and a theorem for the development thereof, are presented with which one may realize constant-resistance (or reflectionless) filters, having ideally zero reflection coefficient at all frequencies and from all ports, suitable for elliptic and pseudo-elliptic filter responses. The proposed theorem produces topologies of a type known as the coupled-ladder, which has be… ▽ More Single-ended circuit topologies, and a theorem for the development thereof, are presented with which one may realize constant-resistance (or reflectionless) filters, having ideally zero reflection coefficient at all frequencies and from all ports, suitable for elliptic and pseudo-elliptic filter responses. The proposed theorem produces topologies of a type known as the coupled-ladder, which has been previously studied for only polynomial responses (e.g. Butterworth, Chebyshev, etc.). A comparison between these topologies and another classical approach known as the economy bridge reveals that those proposed here have a number of theoretical and practical advantages. The theory is tested by the construction of a sixth-order, low-pass reflectionless filter exhibiting a pseudo-elliptic frequency response. Measured results are in excellent agreement with theory, and show return loss better than 20 dB throughout the pass-band, the transition-band, and up to two octaves into the stop-band. △ Less

Submitted 7 April, 2019; originally announced April 2019.

Comments: 12 pages, 15 figures, to be submitted to IEEE TCAS-I

Science with an ngVLA: The ngVLA Reference Design

Authors: Robert Selina, Eric Murphy, Mark McKinnon, Anthony Beasley, Bryan Butler, Chris Carilli, Barry Clark, Steven Durand, Alan Erickson, Rafael Hiriart, Wes Grammer, James Jackson, Brian Kent, Brian Mason, Matthew Morgan, Omar Yeste Ojeda, Viviana Rosero, William Shillue, Silver Sturgis, Denis Urbain

Abstract: The next-generation Very Large Array (ngVLA) is an astronomical observatory planned to operate at centimeter wavelengths (25 to 0.26 centimeters, corresponding to a frequency range extending from 1.2 to 116 GHz). The observatory will be a synthesis radio telescope constituted of approximately 244 reflector antennas each of 18 meters diameter, and 19 reflector antennas each of 6 meters diameter, op… ▽ More The next-generation Very Large Array (ngVLA) is an astronomical observatory planned to operate at centimeter wavelengths (25 to 0.26 centimeters, corresponding to a frequency range extending from 1.2 to 116 GHz). The observatory will be a synthesis radio telescope constituted of approximately 244 reflector antennas each of 18 meters diameter, and 19 reflector antennas each of 6 meters diameter, operating in a phased or interferometric mode. We provide a technical overview of the Reference Design of the ngVLA. This Reference Design forms a baseline for a technical readiness assessment and the construction and operations cost estimate of the ngVLA. The concepts for major system elements such as the antenna, receiving electronics, and central signal processing are presented. △ Less

Submitted 16 October, 2018; originally announced October 2018.

Comments: To be published in the ASP Monograph Series, "Science with a Next-Generation VLA", ed. E. J. Murphy (ASP, San Francisco, CA). arXiv admin note: substantial text overlap with arXiv:1806.08405

Reflectionless Filter Topologies Supporting Arbitrary Ladder Prototypes

Authors: Matthew A. Morgan, Wavley M. Groves III, Tod A. Boyd

Abstract: Modifications of the authors' previously-published, generalized, lumped-element, reflectionless filter topologies are presented which remove the original constraints on the relative values of its prototype parameters. Thus, any transfer function which can be realized as the transmission or reflection coefficient of a conventional ladder prototype may now be implemented in reflectionless form --- t… ▽ More Modifications of the authors' previously-published, generalized, lumped-element, reflectionless filter topologies are presented which remove the original constraints on the relative values of its prototype parameters. Thus, any transfer function which can be realized as the transmission or reflection coefficient of a conventional ladder prototype may now be implemented in reflectionless form --- that is, having the same transfer function in transmission but with identically zero reflection coefficient at both ports and at all frequencies from DC to infinity, given ideal elements. The theoretical basis of these modifications is explained, and then tested via the construction of passive, reflectionless low-pass filter prototypes that, in the prior topology, would have required negative reactive elements. The results show excellent agreement with theory. △ Less

Submitted 29 June, 2018; originally announced July 2018.

Comments: 8 pages, 17 figures, to be submitted

The Next Generation Very Large Array: A Technical Overview

Authors: Robert J. Selina, Eric J. Murphy, Mark McKinnon, Anthony Beasley, Bryan Butler, Chris Carilli, Barry Clark, Alan Erickson, Wes Grammer, James Jackson, Brian Kent, Brian Mason, Matthew Morgan, Omar Ojeda, William Shillue, Silver Sturgis, Denis Urbain

Abstract: The next-generation Very Large Array (ngVLA) is an astronomical observatory planned to operate at centimeter wavelengths (25 to 0.26 centimeters, corresponding to a frequency range extending from 1.2 GHz to 116 GHz). The observatory will be a synthesis radio telescope constituted of approximately 214 reflector antennas each of 18 meters diameter, operating in a phased or interferometric mode. We p… ▽ More The next-generation Very Large Array (ngVLA) is an astronomical observatory planned to operate at centimeter wavelengths (25 to 0.26 centimeters, corresponding to a frequency range extending from 1.2 GHz to 116 GHz). The observatory will be a synthesis radio telescope constituted of approximately 214 reflector antennas each of 18 meters diameter, operating in a phased or interferometric mode. We provide an overview of the current system design of the ngVLA. The concepts for major system elements such as the antenna, receiving electronics, and central signal processing are presented. We also describe the major development activities that are presently underway to advance the design. △ Less

Submitted 21 June, 2018; originally announced June 2018.

Comments: 17 pages, 11 figure, to be published in the proceedings of the 2018 SPIE Astronomical Telescopes and Instrumentation conference

Performance of a highly sensitive, 19-element, dual-polarization, cryogenic L-band Phased Array Feed on the Green Bank Telescope

Authors: D. Anish Roshi, W. Shillue, B. Simon, K. F. Warnick, B. Jeffs, D. J. Pisano, R. Prestage, S. White, J. R. Fisher, M. Morgan, R. Black, M. Burnett, J. Diao, M. Ruzindana, V. van Tonder, L. Hawkins, P. Marganian, T. Chamberlin, J. Ray, N. M. Pingel, K. Rajwade, D. R. Lorimer, A. Rane, J. Castro, W. Groves , et al. (4 additional authors not shown)

Abstract: A new 1.4 GHz 19-element, dual-polarization, cryogenic phased array feed (PAF) radio astronomy receiver has been developed for the Robert C. Byrd Green Bank Telescope (GBT) as part of FLAG (Focal L-band Array for the GBT) project. Commissioning observations of calibrator radio sources show that this receiver has the lowest reported beamformed system temperature ($T_{\rm sys}$) normalized by apertu… ▽ More A new 1.4 GHz 19-element, dual-polarization, cryogenic phased array feed (PAF) radio astronomy receiver has been developed for the Robert C. Byrd Green Bank Telescope (GBT) as part of FLAG (Focal L-band Array for the GBT) project. Commissioning observations of calibrator radio sources show that this receiver has the lowest reported beamformed system temperature ($T_{\rm sys}$) normalized by aperture efficiency ($η$) of any phased array receiver to date. The measured $T_{\rm sys}/η$ is $25.4 \pm 2.5$ K near 1350 MHz for the boresight beam, which is comparable to the performance of the current 1.4 GHz cryogenic single feed receiver on the GBT. The degradation in $T_{\rm sys}/η$ at $\sim$ 4 arcmin (required for Nyquist sampling) and $\sim$ 8 arcmin offsets from the boresight is, respectively, $\sim$ 1\% and $\sim$ 20\% of the boresight value. The survey speed of the PAF with seven formed beams is larger by a factor between 2.1 and 7 compared to a single beam system depending on the observing application. The measured performance, both in frequency and offset from boresight, qualitatively agree with predictions from a rigorous electromagnetic model of the PAF. The astronomical utility of the receiver is demonstrated by observations of the pulsar B0329+54 and an extended HII region, the Rosette Nebula. The enhanced survey speed with the new PAF receiver will enable the GBT to carry out exciting new science, such as more efficient observations of diffuse, extended neutral hydrogen emission from galactic in-flows and searches for Fast Radio Bursts. △ Less

Submitted 12 March, 2018; originally announced March 2018.

Comments: 24 pages, 16 figures, to appear in Astronomical Journal

A Highly-Sensitive Cryogenic Phased Array Feed for the Green Bank Telescope

Authors: D. Anish Roshi, W. Shillue, J. R. Fisher, M. Morgan, J. Castro, W. Groves, T. Boyd, B. Simon, L. Hawkins, V. van Tonder, J. D. Nelson, J. Ray, T. Chamberlain, S. White, R. Black, K. F. Warnick, B. Jeffs, R. Prestage

Abstract: In this paper, we describe the development of a new L-band (1.4 GHz) Cryogenic Phased Array Feed (PAF) system, referred to as the GBT2 array. Results from initial measurements made with the GBT2 array are also presented. The PAF was developed for the Green Bank Telescope (GBT) as part of the Focal L-band Array for the GBT (FLAG) project. During the first stage of the development work (Phase I), a… ▽ More In this paper, we describe the development of a new L-band (1.4 GHz) Cryogenic Phased Array Feed (PAF) system, referred to as the GBT2 array. Results from initial measurements made with the GBT2 array are also presented. The PAF was developed for the Green Bank Telescope (GBT) as part of the Focal L-band Array for the GBT (FLAG) project. During the first stage of the development work (Phase I), a prototype cryogenic 19 element dual-polarized array with "Kite" dipole elements was developed and tested on the GBT. The measured system temperature over efficiency ($T_{sys}/η$) ratio for the bore sight beam of the Kite array was 45.5 K at 1.55 GHz. The off-boresight $T_{sys}/η$ shows an increase by 13 K at an offset equal to the half power beam width (7$^{'}$.2 at 1.7 GHz). Our measurements indicate that the off-boresight degradation and field-of-view (FoV) limitation of the Kite array is simply due to the fixed array size. To increase the FoV, a new 19-element GBT2 array with larger array spacing was developed during FLAG Phase II. The frequency response of the array was optimized from 1.2 to 1.6 GHz. A system with larger cryostat, new low noise amplifiers (LNAs), down-conversion and digitization close to the front end, unformatted digital transmission over fiber, ROACH II based polyphase filter banks (PFBs) with bandwidth 150 MHz and a data acquisition system that records voltage samples from one of the PFB channels were all developed. The data presented here is processed off-line. The receiver temperature measured with the new system is 17 K at 1.4 GHz, an improvement $>$ 8 K over the previous Kite array. Measurements with the GBT2 array on the telescope are in progress. A real time 150 MHz beamformer is also being developed as part of an NSF-funded collaboration between NRAO/GBO/BYU \& West Virginia University (Beamformer Project) to support science observations. △ Less

Submitted 6 November, 2017; originally announced November 2017.

Comments: 4 pages, 7 figures, to appear in the proceedings of 32nd URSI GASS, August 2017

A Cryogenic SiGe Low Noise Amplifier Optimized for Phased Array Feeds

Authors: Wavley M. Groves III, Matthew A. Morgan

Abstract: The growing number of phased array feeds (PAF) being built for radio astronomy demonstrates an increasing need for low noise amplifiers (LNA) that are designed for repeatability, low noise, and ease of manufacture. Specific design features which help to achieve these goals include the use of unpackaged transistors (for cryogenic operation), single-polarity biasing, straight plug-in RF interfaces t… ▽ More The growing number of phased array feeds (PAF) being built for radio astronomy demonstrates an increasing need for low noise amplifiers (LNA) that are designed for repeatability, low noise, and ease of manufacture. Specific design features which help to achieve these goals include the use of unpackaged transistors (for cryogenic operation), single-polarity biasing, straight plug-in RF interfaces to facilitate installation and re-work, and the use of off-the shelf components. The focal L-band array for the Green Bank Telescope (FLAG) is a cooperative effort by Brigham Young University (BYU) and the National Radio Astronomy Observatory (NRAO) using warm dipole antennae and cryogenic Silicon Germanium Heterojunction Bipolar Transistor (SiGe HBT) LNAs. These LNAs have an in band gain average of 38 dB and 4.85 Kelvin average noise temperature. Although the FLAG instrument was the driving instrument behind this development, most of the key features of the design and the advantages they offer apply broadly to other array feeds, including independent-beam and phased, and for many antenna types such as horn, dipole, Vivaldi, connected-bowtie, etc. This paper will focus on the unique requirements array feeds have for low noise amplifiers and how amplifier manufacturing can accommodate these needs. △ Less

Submitted 5 May, 2017; v1 submitted 13 December, 2016; originally announced December 2016.

When "Optimal Filtering" Isn't

Authors: J. W. Fowler, B. K. Alpert, W. B. Doriese, J. Hays-Wehle, Y. -I. Joe, K. M. Morgan, G. C. O'Neil, C. D. Reintsema, D. R. Schmidt, J. N. Ullom, D. S. Swetz

Abstract: The so-called "optimal filter" analysis of a microcalorimeter's x-ray pulses is statistically optimal only if all pulses have the same shape, regardless of energy. The shapes of pulses from a nonlinear detector can and do depend on the pulse energy, however. A pulse-fitting procedure that we call "tangent filtering" accounts for the energy dependence of the shape and should therefore achieve super… ▽ More The so-called "optimal filter" analysis of a microcalorimeter's x-ray pulses is statistically optimal only if all pulses have the same shape, regardless of energy. The shapes of pulses from a nonlinear detector can and do depend on the pulse energy, however. A pulse-fitting procedure that we call "tangent filtering" accounts for the energy dependence of the shape and should therefore achieve superior energy resolution. We take a geometric view of the pulse-fitting problem and give expressions to predict how much the energy resolution stands to benefit from such a procedure. We also demonstrate the method with a case study of K-line fluorescence from several 3d transition metals. The method improves the resolution from 4.9 eV to 4.2 eV at the Cu K$α$ line (8.0keV). △ Less

Submitted 23 November, 2016; originally announced November 2016.

Comments: Submitted to the Proceedings of the 2016 Applied Superconductivity Conference

Custom Chipset and Compact Module Design for a 75-110 GHz Laboratory Signal Source

Authors: Matthew A. Morgan, Tod A. Boyd, Jason J. Castro

Abstract: We report on the development and characterization of a compact, full-waveguide bandwidth (WR-10) signal source for general-purpose testing of mm-wave components. The MMIC-based multichip module is designed for compactness and ease-of-use, especially in size-constrained test sets such as a wafer probe station. It takes as input a cm-wave CW reference and provides a factor of three frequency multipl… ▽ More We report on the development and characterization of a compact, full-waveguide bandwidth (WR-10) signal source for general-purpose testing of mm-wave components. The MMIC-based multichip module is designed for compactness and ease-of-use, especially in size-constrained test sets such as a wafer probe station. It takes as input a cm-wave CW reference and provides a factor of three frequency multiplication as well as amplification, output power adjustment, and in-situ output power monitoring. It utilizes a number of custom MMIC chips such as a Schottky-diode limiter and a broadband mm-wave detector, both designed explicitly for this module, as well as custom millimeter-wave multipliers and amplifiers reported in previous papers. △ Less

Submitted 19 July, 2016; originally announced July 2016.

Comments: 6 pages, 14 figures, to be submitted to IOPScience Measurement Science and Technology journal

A 10-100 GHz Coax To Double-Ridged Waveguide Launcher and Horn Antenna

Authors: Matthew A. Morgan, Tod A. Boyd

Abstract: The design, fabrication, and measurement of a coax to double-ridged waveguide launcher and horn antenna is presented. The novel launcher design employs two symmetric field probes across the ridge gap to minimize spreading inductance in the transition, and achieves better than 15 dB return loss over a 10:1 bandwidth. The aperture-matched horn uses a half-cosine transition into a linear taper for th… ▽ More The design, fabrication, and measurement of a coax to double-ridged waveguide launcher and horn antenna is presented. The novel launcher design employs two symmetric field probes across the ridge gap to minimize spreading inductance in the transition, and achieves better than 15 dB return loss over a 10:1 bandwidth. The aperture-matched horn uses a half-cosine transition into a linear taper for the outer waveguide dimensions and ridge width, and a power-law scaled gap in order to realize monotonically-varying cutoff frequencies, thus avoiding the appearance of trapped mode resonances. It achieves a nearly constant beamwidth in both E- and H-planes for an overall directivity of about 16.5 dB from 10-100 GHz. △ Less

Submitted 30 March, 2015; originally announced March 2015.

Comments: 5 pages, 13 figures

Reflectionless Filter Structures

Authors: Matthew A. Morgan, Tod A. Boyd

Abstract: This paper expands on the previously described reflectionless filters - that is, filters having, in principle, identically-zero reflection coefficient at all frequencies - by introducing a wide variety of new reflectionless structures that were not part of the original publication. In addition to extending the lumped-element derivation to include transmission line filters, this is achieved by the… ▽ More This paper expands on the previously described reflectionless filters - that is, filters having, in principle, identically-zero reflection coefficient at all frequencies - by introducing a wide variety of new reflectionless structures that were not part of the original publication. In addition to extending the lumped-element derivation to include transmission line filters, this is achieved by the introduction of a novel method wherein the left- and right-hand side stop-band terminations are coupled to each other using a two-port sub-network. Specific examples of the sub-network are given which increase the stop-band attenuation per filter cell and steepen the cutoff response without disrupting the reflectionless property or increasing the insertion-loss in the pass-band. It is noteworthy that a common feature of all the structures derived by these methods is that most, if not all, of the reactive elements are of equal normalized value. This greatly simplifies the tuning requirements, and has facilitated their implementation as monolithic microwave integrated circuits (MMICs). A number of examples of MMIC reflectionless filters constructed in this way are presented and their results compared to the theory. △ Less

Submitted 5 February, 2015; v1 submitted 29 July, 2014; originally announced July 2014.

Comments: 9 pages, 20 figures

Exploring the Variable Sky with LINEAR. II. Halo Structure and Substructure Traced by RR Lyrae Stars to 30 kpc

Authors: Branimir Sesar, Željko Ivezić, J. Scott Stuart, Dylan M. Morgan, Andrew C. Becker, Sanjib Sharma, Lovro Palaversa, Mario Jurić, Przemyslaw Wozniak, Hakeem Oluseyi

Abstract: We present a sample of ~5,000 RR Lyrae stars selected from the recalibrated LINEAR dataset and detected at heliocentric distances between 5 kpc and 30 kpc over ~8,000 deg^2 of sky. The coordinates and light curve properties, such as period and Oosterhoff type, are made publicly available. We find evidence for the Oosterhoff dichotomy among field RR Lyrae stars, with the ratio of the type II and I… ▽ More We present a sample of ~5,000 RR Lyrae stars selected from the recalibrated LINEAR dataset and detected at heliocentric distances between 5 kpc and 30 kpc over ~8,000 deg^2 of sky. The coordinates and light curve properties, such as period and Oosterhoff type, are made publicly available. We find evidence for the Oosterhoff dichotomy among field RR Lyrae stars, with the ratio of the type II and I subsamples of about 1:4. The number density distribution of halo RRab stars as a function of galactocentric distance can be described as an oblate ellipsoid with the axis ratio q=0.63 and with either a single or a double power law with a power-law index in the range -2 to -3. Using a group-finding algorithm EnLink, we detected seven candidate halo groups, only one of which is statistically spurious. Three of these groups are near globular clusters (M53/NGC 5053, M3, M13), and one is near a known halo substructure (Virgo Stellar Stream); the remaining three groups do not seem to be near any known halo substructures or globular clusters, and seem to have a higher ratio of Oosterhoff type II to Oosterhoff type I RRab stars than what is found in the halo. The extended morphology and the position (outside the tidal radius) of some of the groups near globular clusters is suggestive of tidal streams possibly originating from globular clusters. Spectroscopic followup of detected halo groups is encouraged. △ Less

Submitted 10 June, 2013; v1 submitted 9 May, 2013; originally announced May 2013.

Comments: 49 pages, 18 figures, one machine-readable table (downloadable from "Other formats/Source"), AJ in press; updated references and Table 1 to match the published version. The animations referenced in the paper may be downloaded from http://www.astro.caltech.edu/~bsesar/media.html

Unformatted Digital Fiber-Optic Data Transmission for Radio Astronomy Front-Ends

Authors: Matthew A. Morgan, J. Richard Fisher, Jason J. Castro

Abstract: We report on the development of a prototype integrated receiver front-end that combines all conversions from RF to baseband, from analog to digital, and from copper to fiber into one compact assembly, with the necessary gain and stability suitable for radio astronomy applications. The emphasis in this article is on a novel digital data link over optical fiber which requires no formatting in the fr… ▽ More We report on the development of a prototype integrated receiver front-end that combines all conversions from RF to baseband, from analog to digital, and from copper to fiber into one compact assembly, with the necessary gain and stability suitable for radio astronomy applications. The emphasis in this article is on a novel digital data link over optical fiber which requires no formatting in the front-end, greatly reducing the complexity, bulk, and power consumption of digital electronics inside the antenna, facilitating its integration with the analog components, and minimizing the self-generated radio-frequency interference (RFI) which could leak into the signal path. Management of the serial data link is performed entirely in the back-end based on the statistical properties of signals with a strong random noise component. In this way, the full benefits of precision and stability afforded by conventional digital data transmission are realized with far less overhead at the focal plane of a radio telescope. △ Less

Submitted 3 May, 2013; originally announced May 2013.

Comments: 13 pages, 14 figures

Graphical Prediction of Trapped Mode Resonances in Sub-mm and THz Waveguide Networks

Authors: Matthew A. Morgan, Shing-Kuo Pan

Abstract: An analytical method for the visualization and prediction of trapped-mode resonances based on the dimensions of a dispersive microwave network is described. The method as explained is intuitive, easy to implement, and has proven itself to be a useful tool in the avoidance of problems associated with trapped modes prior to fabrication, as well as to correct those problems in designs where this desi… ▽ More An analytical method for the visualization and prediction of trapped-mode resonances based on the dimensions of a dispersive microwave network is described. The method as explained is intuitive, easy to implement, and has proven itself to be a useful tool in the avoidance of problems associated with trapped modes prior to fabrication, as well as to correct those problems in designs where this design detail was overlooked. △ Less

Submitted 13 December, 2012; v1 submitted 12 December, 2012; originally announced December 2012.

Comments: 10 pages, 20 figures, to be published in IEEE Transactions on Terahertz Science and Technology special issue on ISSTT, January 2013

Thinking Outside the Band: Absorptive Filtering

Authors: Matthew A. Morgan

Abstract: The reflectionless filter cell described in this article alleviates many system problems associated with excess out-of-band gain, impedance mismatches, and component interactions. The simplest filter cell exhibits a third-order Inverse Chebyshev response with 14.47 dB peak stopband attenuation, and several can be cascaded for additional attenuation as needed. They are simple to design and easy to… ▽ More The reflectionless filter cell described in this article alleviates many system problems associated with excess out-of-band gain, impedance mismatches, and component interactions. The simplest filter cell exhibits a third-order Inverse Chebyshev response with 14.47 dB peak stopband attenuation, and several can be cascaded for additional attenuation as needed. They are simple to design and easy to use - for much like small fixed attenuators ("pads"), they can be placed anywhere in the signal path desired without fear of causing unwanted standing waves, and instead reducing them where they already exist beyond the intended frequency range. Compared to conventional filter topologies with similar cutoff frequencies, they exhibit an order of magnitude greater amplitude and phase stability, ensuring accurate and repeatable complex gain in calibrated systems. Finally, the component requirements are moderate in value and minimal in number, easing their implementation while improving design yield, and extending the applicability of a given component technology beyond the normal range, both above and below. △ Less

Submitted 9 March, 2012; originally announced March 2012.

Comments: 6 pages, 5 figures, submitted to Microwave Journal

Mutual Coupling in Compact Orthomode Transducers

Authors: Matthew A. Morgan

Abstract: The scattering parameters of generalized compact orthomode transducers using azimuthally-distributed field probes in a dual-mode waveguide are analyzed. Theoretical expressions constraining the mutual coupling between the probes are derived and evaluated for three- and four-probe orthomode transducers with and without a coaxial reference port for calibration injection. The mutual coupling is shown… ▽ More The scattering parameters of generalized compact orthomode transducers using azimuthally-distributed field probes in a dual-mode waveguide are analyzed. Theoretical expressions constraining the mutual coupling between the probes are derived and evaluated for three- and four-probe orthomode transducers with and without a coaxial reference port for calibration injection. The mutual coupling is shown to be identically zero or cancel coherently in all cases, suggesting that radiometric receivers with the best possible system noise temperature may be realized using these topologies. △ Less

Submitted 10 January, 2011; originally announced January 2011.

Comments: 3 pages, 1 figure, to be submitted to IEEE Microwave and Wireless Components Letters

Synthesis of a New Class of Reflectionless Filter Prototypes

Authors: Matthew A. Morgan, Tod A. Boyd

Abstract: A design methodology and synthesis equations are described for lumped-element filter prototypes having low-pass, high-pass, band-pass, or band-stop characteristics with theoretically perfect input- and output-match at all frequencies. Such filters are a useful building block in a wide variety of systems in which the highly reactive out-of-band termination presented by a conventional filter is unde… ▽ More A design methodology and synthesis equations are described for lumped-element filter prototypes having low-pass, high-pass, band-pass, or band-stop characteristics with theoretically perfect input- and output-match at all frequencies. Such filters are a useful building block in a wide variety of systems in which the highly reactive out-of-band termination presented by a conventional filter is undesirable. The filter topology is first derived from basic principles. Then the relative merits of several implementations and tunings are compared via simulation. Finally, measured data on low-pass and band-pass filter examples are presented which illustrate the practical advantages as well as showing excellent agreement between measurement and theory. △ Less

Submitted 20 August, 2010; originally announced August 2010.

Comments: 8 pages, 15 figures, submitted to MTT Transactions

Compact Orthomode Transducers Using Digital Polarization Synthesis

Authors: Matthew A. Morgan, J. Richard Fisher, Tod A. Boyd

Abstract: In this paper we present a novel class of compact orthomode transducers which use digital calibration to synthesize the desired polarization vectors while maintaining high isolation and minimizing mass and volume. These digital orthomode transducers consist of an arbitrary number of planar probes in a circular waveguide, each of which is connected to an independent receiver chain designed for stab… ▽ More In this paper we present a novel class of compact orthomode transducers which use digital calibration to synthesize the desired polarization vectors while maintaining high isolation and minimizing mass and volume. These digital orthomode transducers consist of an arbitrary number of planar probes in a circular waveguide, each of which is connected to an independent receiver chain designed for stability of complex gain. The outputs of each receiver chain are then digitized and combined numerically with calibrated, complex coefficients. Measurements on two prototype digital orthomode transducers, one with three probes and one with four, show better than 50 dB polarization isolation over a 10 C temperature range with a single calibration. △ Less

Submitted 20 August, 2010; originally announced August 2010.

Comments: 12 pages, 20 figures, submitted to MTT Transactions

Experiments with calibrated digital sideband separating downconversion

Authors: Matthew A. Morgan, J. Richard Fisher

Abstract: This article reports on the first step in a focused program to re-optimize radio astronomy receiver architecture to better take advantage of the latest advancements in commercial digital technology. Specifically, an L-Band sideband-separating downconverter has been built using a combination of careful (but ultimately very simple) analog design and digital signal processing to achieve wideband do… ▽ More This article reports on the first step in a focused program to re-optimize radio astronomy receiver architecture to better take advantage of the latest advancements in commercial digital technology. Specifically, an L-Band sideband-separating downconverter has been built using a combination of careful (but ultimately very simple) analog design and digital signal processing to achieve wideband downconversion of an RFI-rich frequency spectrum to baseband in a single mixing step, with a fixed-frequency Local Oscillator and stable sideband isolation exceeding 50 dB over a 12 degree C temperature range. △ Less

Submitted 29 January, 2010; originally announced January 2010.

Comments: 10 pages, 12 figures, to be published in PASP

Next Generation Radio Astronomy Receiver Systems

Authors: Matthew A. Morgan, J. Richard Fisher

Abstract: Radio astronomy observations in the coming decade will require new levels of sensitivity while mapping large regions of space with much greater efficiency than is achieved with current telescopes. This requires new instrumentation with the greatest achievable sensitivity, dynamic range, and field of view. Receiver noise is quickly approaching fundamental limits at most radio wavelengths, so sign… ▽ More Radio astronomy observations in the coming decade will require new levels of sensitivity while mapping large regions of space with much greater efficiency than is achieved with current telescopes. This requires new instrumentation with the greatest achievable sensitivity, dynamic range, and field of view. Receiver noise is quickly approaching fundamental limits at most radio wavelengths, so significant gains in sensitivity can only be made by increasing collecting area. Jointly, these requirements suggest using large arrays of smaller antennas, or many moderate-size antennas equipped with multi-beam arrays. The challenge is to develop receivers and wide bandwidth data transport systems which are lower cost, more compact, more reliable, lower weight, and more reproducible than the best current systems, with no compromise to performance. This can be achieved with a greater degree of component integration, extensive use of digital signal processing and transport, and replacement of functions currently performed in bulky waveguide and coaxial cable components with digital arithmetic and thin optical fibers. In this white paper, we outline the complete redesign and re-optimization of receiver architecture to take advantage of the latest advancements in commercial technology. This involves the seamless integration of the conversions from RF to baseband, from analog to digital, and from copper to fiber within a single receiver module. △ Less

Submitted 26 August, 2009; originally announced August 2009.

Large Instrument Development for Radio Astronomy

Authors: J. R. Fisher, R. F. Bradley, W. F. Brisken, W. D. Cotton, D. T. Emerson, A. R. Kerr, R. J. Lacasse, M. A. Morgan, P. J. Napier, R. D. Norrod, J. M. Payne, M. W. Pospieszalski, A. Symmes, A. R. Thompson, J. C. Webber

Abstract: This white paper offers cautionary observations about the planning and development of new, large radio astronomy instruments. Complexity is a strong cost driver so every effort should be made to assign differing science requirements to different instruments and probably different sites. The appeal of shared resources is generally not realized in practice and can often be counterproductive. Instr… ▽ More This white paper offers cautionary observations about the planning and development of new, large radio astronomy instruments. Complexity is a strong cost driver so every effort should be made to assign differing science requirements to different instruments and probably different sites. The appeal of shared resources is generally not realized in practice and can often be counterproductive. Instrument optimization is much more difficult with longer lists of requirements, and the development process is longer and less efficient. More complex instruments are necessarily further behind the technology state of the art because of longer development times. Including technology R&D in the construction phase of projects is a growing trend that leads to higher risks, cost overruns, schedule delays, and project de-scoping. There are no technology breakthroughs just over the horizon that will suddenly bring down the cost of collecting area. Advances come largely through careful attention to detail in the adoption of new technology provided by industry and the commercial market. Radio astronomy instrumentation has a very bright future, but a vigorous long-term R&D program not tied directly to specific projects needs to be restored, fostered, and preserved. △ Less

Submitted 26 August, 2009; originally announced August 2009.

An improvement to the volcano-scan algorithm for atmospheric correction of CRISM and OMEGA spectral data

Authors: Patrick C. McGuire, Janice L. Bishop, Adrian J. Brown, Abigail A. Fraeman, Giuseppe A. Marzo, M. Frank Morgan, Scott L. Murchie, John F. Mustard, Mario Parente, Shannon M. Pelkey, Ted L. Roush, Frank P. Seelos, Michael D. Smith, Lorenz Wendt, Michael J. Wolff

Abstract: The observations of Mars by the CRISM and OMEGA hyperspectral imaging spectrometers require correction for photometric, atmospheric and thermal effects prior to the interpretation of possible mineralogical features in the spectra. Here, we report on a simple, yet non-trivial, adaptation to the commonly-used volcano-scan correction technique for atmospheric CO_2, which allows for the improved det… ▽ More The observations of Mars by the CRISM and OMEGA hyperspectral imaging spectrometers require correction for photometric, atmospheric and thermal effects prior to the interpretation of possible mineralogical features in the spectra. Here, we report on a simple, yet non-trivial, adaptation to the commonly-used volcano-scan correction technique for atmospheric CO_2, which allows for the improved detection of minerals with intrinsic absorption bands at wavelengths between 1.9-2.1 $μ$m. This volcano-scan technique removes the absorption bands of CO_2 by ensuring that the Lambert albedo is the same at two wavelengths: 1.890 $μ$m and 2.011 $μ$m, with the first wavelength outside the CO_2 gas bands and the second wavelength deep inside the CO_2 gas bands. Our adaptation to the volcano-scan technique moves the first wavelength from 1.890 $μ$m to be instead within the gas bands at 1.980 $μ$m, and for CRISM data, our adaptation shifts the second wavelength slightly, to 2.007 $μ$m. We also report on our efforts to account for a slight ~0.001 $μ$m shift in wavelengths due to thermal effects in the CRISM instrument. △ Less

Submitted 21 March, 2009; originally announced March 2009.

Comments: 17 pages, 6 figures, accepted for publication in 'Planetary and Space Science'

Shock fragmentation model for gravitational collapse

Authors: M. Wilkinson, B. Mehlig, M. A. Morgan

Abstract: A cloud of gas collapsing under gravity will fragment. We present a new theory for this process, in which layers shocked gas fragment due to their gravitational instability. Our model explains why angular momentum does not inhibit the collapse process. The theory predicts that the fragmentation process produces objects which are significantly smaller than most stars, implying that accretion onto… ▽ More A cloud of gas collapsing under gravity will fragment. We present a new theory for this process, in which layers shocked gas fragment due to their gravitational instability. Our model explains why angular momentum does not inhibit the collapse process. The theory predicts that the fragmentation process produces objects which are significantly smaller than most stars, implying that accretion onto the fragments plays an essential role in determining the initial masses of stars. This prediction is also consistent with the hypothesis that planets can be produced by gravitational collapse. △ Less

Submitted 15 December, 2008; originally announced December 2008.

Comments: 22 pages, 3 figures

Journal ref: Res.Astron.Astrophys.11:545-562,2011

Long-Range Reconnaissance Imager on New Horizons

Authors: A. F. Cheng, H. A. Weaver, S. J. Conard, M. F. Morgan, O. Barnouin-Jha, J. D. Boldt, K. A. Cooper, E. H. Darlington, M. P. Grey, J. R. Hayes, K. E. Kosakowski, T. Magee, E. Rossano, D. Sampath, C. Schlemm, H. W. Taylor

Abstract: The LOng-Range Reconnaissance Imager (LORRI) is the high resolution imaging instrument for the New Horizons mission to Pluto, its giant satellite Charon, its small moons Nix and Hydra, and the Kuiper Belt, which is the vast region of icy bodies extending roughly from Neptune's orbit out to 50 astronomical units (AU). New Horizons launched on January 19, 2006 as the inaugural mission in NASA's Ne… ▽ More The LOng-Range Reconnaissance Imager (LORRI) is the high resolution imaging instrument for the New Horizons mission to Pluto, its giant satellite Charon, its small moons Nix and Hydra, and the Kuiper Belt, which is the vast region of icy bodies extending roughly from Neptune's orbit out to 50 astronomical units (AU). New Horizons launched on January 19, 2006 as the inaugural mission in NASA's New Frontiers program. LORRI is a narrow angle (field of view=0.29 deg), high resolution (4.95 microrad pixels), Ritchey-Chretien telescope with a 20.8 cm diameter primary mirror, a focal length of 263 cm, and a three lens field-flattening assembly. A 1024 x 1024 pixel (optically active region), thinned, backside-illuminated charge-coupled device (CCD) detector is used in the focal plane unit and is operated in frame transfer mode. LORRI provides panchromatic imaging over a bandpass that extends approximately from 350 nm to 850 nm. LORRI operates in an extreme thermal environment, situated inside the warm spacecraft with a large, open aperture viewing cold space. LORRI has a silicon carbide optical system, designed to maintain focus over the operating temperature range without a focus adjustment mechanism. Moreover, the spacecraft is thruster-stabilized without reaction wheels, placing stringent limits on the available exposure time and the optical throughput needed to satisfy the measurement requirements. △ Less

Submitted 26 September, 2007; originally announced September 2007.

Comments: 31 pages, 12 figures, 8 tables; To appear in a special volume of Space Science Reviews on the New Horizons mission

Journal ref: Space Sci.Rev.140:189-215,2008

[Fe/H] relations for c-type RR Lyrae Variables based upon Fourier Coefficients

Authors: Siobahn M. Morgan, Jennifer N. Wahl, Rachel M. Wieckhorst

Abstract: [Fe/H] - phi_31 - log P relations are found for c-type RR Lyrae stars in globular clusters. The relations are analogous to that found by Jurcsik & Kovacs (1996) for field ab-type RR Lyrae stars, where a larger period correlates with lower metallicity values for similar values of the Fourier coefficient phi_31. The relations obtained here are used to determine the metallicity of field c-type RR L… ▽ More [Fe/H] - phi_31 - log P relations are found for c-type RR Lyrae stars in globular clusters. The relations are analogous to that found by Jurcsik & Kovacs (1996) for field ab-type RR Lyrae stars, where a larger period correlates with lower metallicity values for similar values of the Fourier coefficient phi_31. The relations obtained here are used to determine the metallicity of field c-type RR Lyrae stars, those within omega Cen, the LMC and toward the galactic bulge. The results are found to compare favorably to metallicity values obtained elsewhere. △ Less

Submitted 15 December, 2006; v1 submitted 15 June, 2005; originally announced June 2005.

Comments: 6 pages, 9 figures. Accepted by MNRAS, major revision from previous version

Journal ref: Mon.Not.Roy.Astron.Soc.374:1421-1426,2007

Beat Cepheid Period Ratios from OPAL Opacities

Authors: S. M. Morgan, D. L. Welch

Abstract: The discovery of a large number of beat Cepheids in the Large Magellanic Cloud in the MACHO survey, provides an opportunity to compare the characteristics of such Cepheids over a range of metallicities. We produced a large grid of linear nonadiabatic pulsation models using the OPAL opacity tables and with compositions corresponding to those of the Milky Way, and the Large and Small Magellanic Cl… ▽ More The discovery of a large number of beat Cepheids in the Large Magellanic Cloud in the MACHO survey, provides an opportunity to compare the characteristics of such Cepheids over a range of metallicities. We produced a large grid of linear nonadiabatic pulsation models using the OPAL opacity tables and with compositions corresponding to those of the Milky Way, and the Large and Small Magellanic Clouds. Using the relationship between the period ratio and the main pulsation period, we are able to define a range of models which correspond to the observed beat Cepheids, and thereby constrain the physical characteristics of the LMC beat Cepheids. We are also able to make some predictions about the nature of the yet-to-be-discovered SMC beat Cepheids. △ Less

Submitted 26 June, 1997; v1 submitted 13 July, 1996; originally announced July 1996.

Comments: 20 pages, 6 embedded Postscript figures, uses aasms4.sty. Accepted for publication in the 1997 September AJ