-
Optimal Dithering Configuration Mitigating Rayleigh-Backscattering-Induced Distortion in Radioastronomic Optical Fiber Systems
Authors:
Jacopo Nanni,
Andrea Giovannini,
Enrico Lenzi,
Simone Rusticelli,
Randall Wayth,
Federico Perini,
Jader Monari,
Giovanni Tartarini
Abstract:
In the context of Radioastronomic applications where the Analog Radio-over-Fiber technology is used for the antenna downlink, detrimental nonlinearity effects arise because of the interference between the forward signal generated by the laser and the Rayleigh backscattered one which is re-forwarded by the laser itself toward the photodetector.
The adoption of the so called dithering technique, w…
▽ More
In the context of Radioastronomic applications where the Analog Radio-over-Fiber technology is used for the antenna downlink, detrimental nonlinearity effects arise because of the interference between the forward signal generated by the laser and the Rayleigh backscattered one which is re-forwarded by the laser itself toward the photodetector.
The adoption of the so called dithering technique, which involves the direct modulation of the laser with a sinusoidal tone and takes advantage of the laser chirping phenomenon, has been proved to reduce such Rayleigh Back Scattering - induced nonlinearities. The frequency and the amplitude of the dithering tone should both be as low as possible, in order to avoid undesired collateral effects on the received spectrum as well as keep at low levels the global energy consumption.
Through a comprehensive analysis of dithered Radio over Fiber systems, it is demonstrated that a progressive reduction of the dithering tone frequency affects in a peculiar fashion both the chirping characteristics of the field emitted by the laser and the spectrum pattern of the received signal at the fiber end.
Accounting for the concurrent effects caused by such phenomena, optimal operating conditions are identified for the implementation of the dithering tone technique in radioastronomic systems.
△ Less
Submitted 18 July, 2022; v1 submitted 1 July, 2022;
originally announced July 2022.
-
The Engineering Development Array 2: design, performance and lessons from an SKA-Low prototype station
Authors:
Randall Wayth,
Marcin Sokolowski,
Jess Broderick,
Steven J. Tingay,
Raunaq Bhushan,
Tom Booler,
Riccardo Chiello,
David B. Davidson,
David Emrich,
Budi Juswardy,
David Kenney,
Giulia Macario,
Alessio Magro,
Andrea Mattana,
David Minchin,
Jader Monari,
Andrew McPhail,
Federico Perini,
Giuseppe Pupillo,
Marco Schiaffino,
Ravi Subrahmanya,
Andre van Es,
Mia Walker,
Mark Waterson
Abstract:
We present the Engineering Development Array 2, which is one of two instruments built as a second generation prototype station for the future Square Kilometre Array Low Frequency Array. The array is comprised of 256 dual-polarization dipole antennas that can work as a phased array or as a standalone interferometer. We describe the design of the array and the details of design changes from previous…
▽ More
We present the Engineering Development Array 2, which is one of two instruments built as a second generation prototype station for the future Square Kilometre Array Low Frequency Array. The array is comprised of 256 dual-polarization dipole antennas that can work as a phased array or as a standalone interferometer. We describe the design of the array and the details of design changes from previous generation instruments, as well as the motivation for the changes. Using the array as an imaging interferometer, we measure the sensitivity of the array at five frequencies ranging from 70 to 320 MHz.
△ Less
Submitted 1 December, 2021;
originally announced December 2021.
-
The Aperture Array Verification System 1: System overview and early commissioning results
Authors:
P. Benthem,
R. Wayth,
E. de Lera Acedo,
K. Zarb Adami,
M. Alderighi,
C. Belli,
P. Bolli,
T. Booler,
J. Borg,
J. W. Broderick,
S. Chiarucci,
R. Chiello,
L. Ciani,
G. Comoretto,
B. Crosse,
D. Davidson,
A. DeMarco,
D. Emrich,
A. van Es,
D. Fierro,
A. Faulkner,
M. Gerbers,
N. Razavi-Ghods,
P. Hall,
L. Horsley
, et al. (29 additional authors not shown)
Abstract:
The design and development process for the Square Kilometre Array (SKA) radio telescope, the Low Frequency Aperture Array component, was progressed during the SKA pre-construction phase by an international consortium, with the goal of meeting requirements for a critical design review. As part of the development process a full-sized prototype SKA Low station was deployed, the Aperture Array Verific…
▽ More
The design and development process for the Square Kilometre Array (SKA) radio telescope, the Low Frequency Aperture Array component, was progressed during the SKA pre-construction phase by an international consortium, with the goal of meeting requirements for a critical design review. As part of the development process a full-sized prototype SKA Low station was deployed, the Aperture Array Verification System 1 (AAVS1). We provide a system overview and describe the commissioning results of AAVS1, which is a low frequency radio telescope with 256 dual-polarisation log-periodic dipole antennas working as a phased array. A detailed system description is provided, including an in-depth overview of relevant sub-systems, ranging from hardware, firmware, software, calibration,and control sub-systems. Early commissioning results cover initial bootstrapping, array calibration, stability testing, beam-forming,and on-sky sensitivity validation. Lessons learned are presented, along with future developments.
△ Less
Submitted 7 October, 2021;
originally announced October 2021.
-
Characterization of the SKA1-Low prototype station Aperture Array Verification System 2
Authors:
Giulia Macario,
Giuseppe Pupillo,
Gianni Bernardi,
Pietro Bolli,
Paola Di Ninni,
Giovanni Comoretto,
Andrea Mattana,
Jader Monari,
Federico Perini,
Marco Schiaffino,
Marcin Sokolowski,
Randall Wayth,
Jess Broderick,
Mark Waterson,
Maria Grazia Labate,
Riccardo Chiello,
Alessio Magro,
Tom Booler,
Raunaq Bhushan
Abstract:
The low frequency component of the Square Kilometre Array (SKA1-Low) will be an aperture phased array located at the Murchison Radio-astronomy Observatory (MRO) site in Western Australia. It will be composed of 512 stations, each of them consisting of 256 log-periodic dual polarized antennas, and will operate in the low frequency range (50 MHz - 350 MHz) of the SKA bandwidth. The Aperture Array Ve…
▽ More
The low frequency component of the Square Kilometre Array (SKA1-Low) will be an aperture phased array located at the Murchison Radio-astronomy Observatory (MRO) site in Western Australia. It will be composed of 512 stations, each of them consisting of 256 log-periodic dual polarized antennas, and will operate in the low frequency range (50 MHz - 350 MHz) of the SKA bandwidth. The Aperture Array Verification System 2 (AAVS2), operational since late 2019, is the last full-size engineering prototype station deployed at the MRO site before the start of the SKA1-Low construction phase. The aim of this paper is to characterize the station performance through commissioning observations at six different frequencies (55, 70, 110, 160, 230 and 320 MHz) collected during its first year of activities. We describe the calibration procedure, present the resulting all-sky images and their analysis, and discuss the station calibratability and system stability. Using the difference imaging method, we also derive estimates of the SKA1-Low sensitivity for the same frequencies, and compare them to those obtained through electromagnetic simulations across the entire telescope bandwidth, finding good agreement (within $\leq 13%$). Moreover, our estimates exceed the SKA1-Low requirements at all the considered frequencies, by up to a factor of $\sim$2.3. Our results are very promising and allow an initial validation of the AAVS2 prototype station performance, which is an important step towards the upcoming SKA-Low telescope construction and science.
△ Less
Submitted 24 September, 2021;
originally announced September 2021.
-
A Southern-Hemisphere all-sky radio transient monitor for SKA-Low prototype stations
Authors:
M. Sokolowski,
R. B. Wayth,
N. D. R. Bhat,
D. Price,
J. W. Broderick,
G. Bernardi,
P. Bolli,
R. Chiello,
G. Comoretto,
B. Crosse,
D. B. Davidson,
G. Macario,
A. Magro,
A. Mattana,
D. Minchin,
A. McPhail,
J. Monari,
F. Perini,
G. Pupillo,
G. Sleap,
S. Tingay,
D. Ung,
A. Williams
Abstract:
We present the first southern-hemisphere all-sky imager and radio-transient monitoring system implemented on two prototype stations of the low-frequency component of the Square Kilometre Array. Since its deployment the system has been used for real-time monitoring of the recorded commissioning data. Additionally, a transient searching algorithm has been executed on the resulting all-sky images. It…
▽ More
We present the first southern-hemisphere all-sky imager and radio-transient monitoring system implemented on two prototype stations of the low-frequency component of the Square Kilometre Array. Since its deployment the system has been used for real-time monitoring of the recorded commissioning data. Additionally, a transient searching algorithm has been executed on the resulting all-sky images. It uses a difference imaging technique, and has enabled identification of a wide variety of transient classes, ranging from human-made radio-frequency interference to genuine astrophysical events. Observations at the frequency 159.4 MHz and higher in a single coarse channel (0.926 MHz) were made with 2s time resolution, and multiple nights were analysed. Despite having modest sensitivity (~few Jy/beam), using a single coarse channel and 2-s imaging, the system detected bright transients from PSR B0950+08, proving that it can be used to detect bright transients of an astrophysical origin. The unusual, extreme activity of the pulsar PSR B0950+08 (up to ~155 Jy/beam) was initially detected in a "blind" search in the 2020-04-10/11 data and later assigned to this specific pulsar. The limitations of our data, however, prevent use from making firm conclusions of the effect being due to a combination of refractive and diffractive scintillation or intrinsic emission mechanisms. The system can routinely collect data over many days without interruptions; the large amount of recorded data at 159.4 and 229.7 MHz allowed us to determine a preliminary transient surface density upper limit of $1.32 \times 10^{-9} \text{deg}^{-2}$ for a timescale and limiting flux density of 2s and 42 Jy, respectively. We plan to extend the observing bandwidth to tens of MHz and improve time resolution to tens of milliseconds in order to increase the sensitivity and enable detections of Fast Radio Bursts below 300 MHz.
△ Less
Submitted 7 April, 2021;
originally announced April 2021.
-
Controlling Rayleigh-Backscattering-Induced Distortion in Radio over Fiber Systems for Radioastronomic Applications
Authors:
Jacopo Nanni,
Andrea Giovannini,
Muhammad Usman Hadi,
Enrico Lenzi,
Simone Rusticelli,
Randall Wayth,
Federico Perini,
Jader Monari,
Giovanni Tartarini
Abstract:
Radio over Fiber (RoF) Systems exploiting a direct modulation of the laser source are presently utilized within important Radioastronomic scenarios. Due to the particular operating conditions of some of these realizations, the phenomena which typically generate nonlinearities in RoF links for telecommunications applications can be here regarded as substantially harmless. However, these same operat…
▽ More
Radio over Fiber (RoF) Systems exploiting a direct modulation of the laser source are presently utilized within important Radioastronomic scenarios. Due to the particular operating conditions of some of these realizations, the phenomena which typically generate nonlinearities in RoF links for telecommunications applications can be here regarded as substantially harmless. However, these same operating conditions can make the RoF systems vulnerable to different kinds of nonlinear effects, related to the influence of the Rayleigh Backscattered signal on the transmitted one. A rigorous description of the phenomenon is performed, and an effective countermeasure to the problem is proposed and demonstrated, both theoretically and experimentally.
△ Less
Submitted 6 May, 2020;
originally announced May 2020.
-
Signal Processing Firmware for the Low Frequency Aperture Array
Authors:
Gianni Comoretto,
Riccardo Chiello,
Matt Roberts,
Rob Halsall,
Kristian Zarb Adami,
Monica Alderighi,
Amin Aminaei,
Jeremy Baker,
Carolina Belli,
Simone Chiarucci,
Sergio D'Angelo,
Andrea De Marco,
Gabriele Dalle Mura,
Alessio Magro,
Andrea Mattana,
Jader Monari,
Giovanni Naldi,
Sandro Pastore,
Federico Perini,
Marco Poloni,
Giuseppe Pupillo,
Simone Rusticelli,
Marco Schiaffino,
Francesco Schillirò,
Emanuele Zaccaro
Abstract:
The signal processing firmware that has been developed for the Low Frequency Aperture Array component of the Square Kilometre Array is described. The firmware is implemented on a dual FPGA board, that is capable of processing the streams from 16 dual polarization antennas. Data processing includes channelization of the sampled data for each antenna, correction for instrumental response and for geo…
▽ More
The signal processing firmware that has been developed for the Low Frequency Aperture Array component of the Square Kilometre Array is described. The firmware is implemented on a dual FPGA board, that is capable of processing the streams from 16 dual polarization antennas. Data processing includes channelization of the sampled data for each antenna, correction for instrumental response and for geometric delays and formation of one or more beams by combining the aligned streams. The channelizer uses an oversampling polyphase filterbank architecture, allowing a frequency continuous processing of the input signal without discontinuities between spectral channels. Each board processes the streams from 16 antennas, as part of larger beamforming system, linked by standard Ethernet interconnections. There are envisaged to be 8192 of these signal processing platforms in the first phase of the Square Kilometre array so particular attention has been devoted to ensure the design is low cost and low power.
△ Less
Submitted 24 February, 2020;
originally announced February 2020.
-
SKA Aperture Array Verification System: Electromagnetic modeling and beam pattern measurements using a micro UAV
Authors:
E. de Lera Acedo,
P. Bolli,
F. Paonessa,
G. Virone,
E. Colin-Beltran,
N. Razavi-Ghods,
I. Aicardi,
A. Lingua,
P. Maschio,
J. Monari,
G. Naldi,
M. Piras,
G. Pupillo
Abstract:
In this paper we present the electromagnetic modeling and beam pattern measurements of a 16-elements ultra wideband sparse random test array for the low frequency instrument of the Square Kilometer Array telescope. We discuss the importance of a small array test platform for the development of technologies and techniques towards the final telescope, highlighting the most relevant aspects of its de…
▽ More
In this paper we present the electromagnetic modeling and beam pattern measurements of a 16-elements ultra wideband sparse random test array for the low frequency instrument of the Square Kilometer Array telescope. We discuss the importance of a small array test platform for the development of technologies and techniques towards the final telescope, highlighting the most relevant aspects of its design. We also describe the electromagnetic simulations and modeling work as well as the embedded-element and array pattern measurements using an Unmanned Aerial Vehicle system. The latter are helpful both for the validation of the models and the design as well as for the future instrumental calibration of the telescope thanks to the stable, accurate and strong radio frequency signal transmitted by the UAV. At this stage of the design, these measurements have shown a general agreement between experimental results and numerical data and have revealed the localized effect of un-calibrated cable lengths in the inner side-lobes of the array pattern.
△ Less
Submitted 12 September, 2017; v1 submitted 1 March, 2017;
originally announced March 2017.
-
The Sky Polarization Observatory
Authors:
S. Cortiglioni,
G. Bernardi,
E. Carretti,
L. Casarini,
S. Cecchini,
C. Macculi,
M. Ramponi,
C. Sbarra,
J. Monari,
A. Orfei,
M. Poloni,
S. Poppi,
G. Boella,
S. Bonometto,
L. Colombo,
M. Gervasi,
G. Sironi,
M. Zannoni,
M. Baralis,
O. A. Peverini,
R. Tascone,
G. Virone,
R. Fabbri,
V. Natale,
L. Nicastro
, et al. (6 additional authors not shown)
Abstract:
SPOrt is an ASI-funded experiment specifically designed to measure the sky polarization at 22, 32 and 90 GHz, which was selected in 1997 by ESA to be flown on the International Space Station. Starting in 2006 and for at least 18 months, it will be taking direct and simultaneous measurements of the Stokes parameters Q and U at 660 sky pixels, with FWHM=7 degrees. Due to development efforts over t…
▽ More
SPOrt is an ASI-funded experiment specifically designed to measure the sky polarization at 22, 32 and 90 GHz, which was selected in 1997 by ESA to be flown on the International Space Station. Starting in 2006 and for at least 18 months, it will be taking direct and simultaneous measurements of the Stokes parameters Q and U at 660 sky pixels, with FWHM=7 degrees. Due to development efforts over the past few years, the design specifications have been significantly improved with respect to the first proposal. Here we present an up-to-date description of the instrument, which now warrants a pixel sensitivity of 1.7 microK for the polarization of the cosmic background radiation, assuming two years of observations. We discuss SPOrt scientific goals in the light of WMAP results, in particular in connection with the emerging double-reionization cosmological scenario.
△ Less
Submitted 14 January, 2004; v1 submitted 12 January, 2004;
originally announced January 2004.
-
The BaR-SPOrt Experiment
Authors:
M. Zannoni,
S. Cortiglioni,
G. Bernardi,
E. Carretti,
S. Cecchini,
C. Macculi,
E. Morelli,
C. Sbarra,
G. Ventura,
L. Nicastro,
J. Monari,
M. Poloni,
S. Poppi,
V. Natale,
M. Baralis,
O. Peverini,
R. Tascone,
G. Virone,
A. Boscaleri,
E. Pascale,
G. Boella,
S. Bonometto,
M. Gervasi,
G. Sironi,
M. Tucci
, et al. (7 additional authors not shown)
Abstract:
BaR-SPOrt (Balloon-borne Radiometers for Sky Polarisation Observations) is an experiment to measure the linearly polarized emission of sky patches at 32 and 90 GHz with sub-degree angular resolution. It is equipped with high sensitivity correlation polarimeters for simultaneous detection of both the U and Q stokes parameters of the incident radiation. On-axis telescope is used to observe angular…
▽ More
BaR-SPOrt (Balloon-borne Radiometers for Sky Polarisation Observations) is an experiment to measure the linearly polarized emission of sky patches at 32 and 90 GHz with sub-degree angular resolution. It is equipped with high sensitivity correlation polarimeters for simultaneous detection of both the U and Q stokes parameters of the incident radiation. On-axis telescope is used to observe angular scales where the expected polarization of the Cosmic Microwave Background (CMBP) peaks. This project shares most of the know-how and sophisticated technology developed for the SPOrt experiment onboard the International Space Station. The payload is designed to flight onboard long duration stratospheric balloons both in the Northern and Southern hemispheres where low foreground emission sky patches are accessible. Due to the weakness of the expected CMBP signal (in the range of microK), much care has been spent to optimize the instrument design with respect to the systematics generation, observing time efficiency and long term stability. In this contribution we present the instrument design, and first tests on some components of the 32 GHz radiometer.
△ Less
Submitted 2 January, 2003;
originally announced January 2003.
-
SPOrt: an Experiment Aimed at Measuring the Large Scale Cosmic Microwave Background Polarization
Authors:
E. Carretti,
S. Cortiglioni,
G. Bernardi,
S. Cecchini,
C. Macculi,
C. Sbarra,
J. Monari,
A. Orfei,
M. Poloni,
S. Poppi,
G. Boella,
S. Bonometto,
M. Gervasi,
G. Sironi,
M. Zannoni,
M. Tucci,
M. Baralis,
O. A. Peverini,
R. Tascone,
G. Virone,
R. Fabbri,
L. Nicastro,
K. -W. Ng,
V. A. Razin,
E. N. Vinyajkin
, et al. (2 additional authors not shown)
Abstract:
SPOrt (Sky Polarization Observatory) is a space experiment to be flown on the International Space Station during Early Utilization Phase aimed at measuring the microwave polarized emission with FWHM = 7deg, in the frequency range 22-90 GHz. The Galactic polarized emission can be observed at the lower frequencies and the polarization of Cosmic Microwave Background (CMB) at 90 GHz, where contamina…
▽ More
SPOrt (Sky Polarization Observatory) is a space experiment to be flown on the International Space Station during Early Utilization Phase aimed at measuring the microwave polarized emission with FWHM = 7deg, in the frequency range 22-90 GHz. The Galactic polarized emission can be observed at the lower frequencies and the polarization of Cosmic Microwave Background (CMB) at 90 GHz, where contaminants are expected to be less important. The extremely low level of the CMB Polarization signal (< 1 uK) calls for intrinsically stable radiometers. The SPOrt instrument is expressly devoted to CMB polarization measurements and the whole design has been optimized for minimizing instrumental polarization effects. In this contribution we present the receiver architecture based on correlation techniques, the analysis showing its intrinsic stability and the custom hardware development carried out to detect such a low signal.
△ Less
Submitted 3 December, 2002;
originally announced December 2002.
-
Limits Due to Instrumental Polarisation in CMB Experiments at Microwave Wavelengths
Authors:
E. Carretti,
R. Tascone,
S. Cortiglioni,
J. Monari,
M. Orsini
Abstract:
An extended analysis of some instrumental polarisation sources has been done, as a consequence of the renewed interest in extremely sensitive polarisation measurements stimulated by Cosmic Microwave Background experiments. The case of correlation polarimeters, being them more suitable than other configurations, has been studied in detail and the algorithm has been derived to calculate their intr…
▽ More
An extended analysis of some instrumental polarisation sources has been done, as a consequence of the renewed interest in extremely sensitive polarisation measurements stimulated by Cosmic Microwave Background experiments. The case of correlation polarimeters, being them more suitable than other configurations, has been studied in detail and the algorithm has been derived to calculate their intrinsic sensitivity limit due to device characteristics as well as to the operating environment. The atmosphere emission, even though totally unpolarised, has been recognized to be the most important source of sensitivity degradation for ground based experiments. This happens through receiver component losses (mainly in the OMT), which generate instrumental polarisation in genuinely uncorrelated signals. The relevant result is that, also in best conditions (cfr. Antarctica), integration times longer than ~40s are not allowed on ground without modulation techniques. Finally, basic rules to estimate the maximum modulation period for each instrumental configuration have been provided.
△ Less
Submitted 20 March, 2001;
originally announced March 2001.
-
The SPOrt Project: Cosmological and Astrophysical Goals
Authors:
R. Fabbri,
S. Cortiglioni,
S. Cecchini,
M. Orsini,
E. Carretti,
G. Boella,
G. Sironi,
J. Monari,
A. Orfei,
R. Tascone,
U. Pisani,
K. W. Ng,
L. Nicastro,
L. Popa,
I. A. Strukov,
M. V. Sazhin
Abstract:
We present the cosmological and astrophysical objectives of the SPOrt mission, which is scheduled for flying on the International Space Station (ISS) in the year 2002 with the purpose of measuring the diffuse sky polarized radiation in the microwave region. We discuss the problem of disentangling the cosmic background polarized signal from the Galactic foregrounds.
We present the cosmological and astrophysical objectives of the SPOrt mission, which is scheduled for flying on the International Space Station (ISS) in the year 2002 with the purpose of measuring the diffuse sky polarized radiation in the microwave region. We discuss the problem of disentangling the cosmic background polarized signal from the Galactic foregrounds.
△ Less
Submitted 26 January, 1999;
originally announced January 1999.
-
The SPOrt Project: an Experimental Overview
Authors:
S. Cortiglioni,
S. Cecchini,
E. Carretti,
M. Orsini,
R. Fabbri,
G. Boella,
G. Sironi,
J. Monari,
A. Orfei,
R. Tascone,
U. Pisani,
K. W. Ng,
L. Nicastro,
L. Popa,
I. A. Strukov,
M. V. Sazhin
Abstract:
The Sky Polarization Observatory (SPOrt) is presented as a project aimed to measure the diffuse sky polarized emission, from the International Space Station, in the frequency range 20-90 GHz with 7 degrees of HPBW. The SPOrt experimental configuration is described with emphasis on the aspects that make SPOrt the first European scientific payload operating at microwave wavelengths.
The Sky Polarization Observatory (SPOrt) is presented as a project aimed to measure the diffuse sky polarized emission, from the International Space Station, in the frequency range 20-90 GHz with 7 degrees of HPBW. The SPOrt experimental configuration is described with emphasis on the aspects that make SPOrt the first European scientific payload operating at microwave wavelengths.
△ Less
Submitted 26 January, 1999;
originally announced January 1999.
