-
Delaying the waterfall transition in warm hybrid inflation
Authors:
Mar Bastero-Gil,
Arjun Berera,
Thomas P. Metcalf,
Joao G. Rosa
Abstract:
We analyze the dynamics and observational predictions of supersymmetric hybrid inflation in the warm regime, where dissipative effects are mediated by the waterfall fields and their subsequent decay into light degrees of freedom. This produces a quasi-thermal radiation bath with a slowly-varying temperature during inflation and further damps the inflaton's motion, thus prolonging inflation. As in…
▽ More
We analyze the dynamics and observational predictions of supersymmetric hybrid inflation in the warm regime, where dissipative effects are mediated by the waterfall fields and their subsequent decay into light degrees of freedom. This produces a quasi-thermal radiation bath with a slowly-varying temperature during inflation and further damps the inflaton's motion, thus prolonging inflation. As in the standard supercooled scenario, inflation ends when the waterfall fields become tachyonic and can no longer sustain a nearly constant vacuum energy, but the interaction with the radiation bath makes the waterfall fields effectively heavier and delays the phase transition to the supersymmetric minimum. In this work, we analyze for the first time the effects of finite temperature corrections and SUSY mass splittings on the quantum effective potential and the resulting dissipation coefficient. We show, in particular, that dissipation can significantly delay the onset of the tachyonic instability to yield 50-60 e-folds of inflation and an observationally consistent primordial spectrum, which is not possible in the standard supercooled regime when inflation is driven by radiative corrections.
△ Less
Submitted 10 December, 2013;
originally announced December 2013.
-
Preprocessing of Hinode/SOT vector magnetograms for nonlinear force-free coronal magnetic field modelling
Authors:
T. Wiegelmann,
J. K. Thalmann,
C. J. Schrijver,
M. L. DeRosa,
T. R. Metcalf
Abstract:
The solar magnetic field is key to understanding the physical processes in the solar atmosphere.
Nonlinear force-free codes have been shown to be useful in extrapolating the coronal field from underlying vector boundary data [see Schrijver et al. 2006 for an overview]. However, we can only measure the magnetic field vector routinely with high accuracy in the photosphere with, e.g., Hinode/SOT,…
▽ More
The solar magnetic field is key to understanding the physical processes in the solar atmosphere.
Nonlinear force-free codes have been shown to be useful in extrapolating the coronal field from underlying vector boundary data [see Schrijver et al. 2006 for an overview]. However, we can only measure the magnetic field vector routinely with high accuracy in the photosphere with, e.g., Hinode/SOT, and unfortunately these data do not fulfill the force-free consistency condition as defined by Aly (1989). We must therefore apply some transformations to these data before nonlinear force-free extrapolation codes can be legitimately applied. To this end, we have developed a minimization procedure that uses the measured photospheric field vectors as input to approximate a more chromospheric like field The method was dubbed preprocessing. See Wiegelmann et al. 2006 for details]. The procedure includes force-free consistency integrals and spatial smoothing. The method has been intensively tested with model active regions [see Metcalf et al. 2008] and been applied to several ground based vector magnetogram data before. Here we apply the preprocessing program to photospheric magnetic field measurements with the Hinode/SOT instrument.
△ Less
Submitted 18 January, 2008;
originally announced January 2008.
-
Can We Improve the Preprocessing of Photospheric Vector Magnetograms by the Inclusion of Chromospheric Observations?
Authors:
T. Wiegelmann,
J. K. Thalmann,
C. J. Schrijver,
M. L. Derosa,
T. R. Metcalf
Abstract:
The solar magnetic field is key to understanding the physical processes in the solar atmosphere. Nonlinear force-free codes have been shown to be useful in extrapolating the coronal field upward from underlying vector boundary data. However, we can only measure the magnetic field vector routinely with high accuracy in the photosphere, and unfortunately these data do not fulfill the force-free co…
▽ More
The solar magnetic field is key to understanding the physical processes in the solar atmosphere. Nonlinear force-free codes have been shown to be useful in extrapolating the coronal field upward from underlying vector boundary data. However, we can only measure the magnetic field vector routinely with high accuracy in the photosphere, and unfortunately these data do not fulfill the force-free condition. We must therefore apply some transformations to these data before nonlinear force-free extrapolation codes can be self-consistently applied. To this end, we have developed a minimization procedure that yields a more chromosphere-like field, using the measured photospheric field vectors as input. The procedure includes force-free consistency integrals, spatial smoothing, and -- newly included in the version presented here -- an improved match to the field direction as inferred from fibrils as can be observed in, e.g., chromospheric H$α$ images. We test the procedure using a model active-region field that included buoyancy forces at the photospheric level. The proposed preprocessing method allows us to approximate the chromospheric vector field to within a few degrees and the free energy in the coronal field to within one percent.
△ Less
Submitted 29 February, 2008; v1 submitted 17 January, 2008;
originally announced January 2008.
-
Non-linear force-free field modeling of a solar active region around the time of a major flare and coronal mass ejection
Authors:
C. J. Schrijver,
M. L. DeRosa,
T. Metcalf,
G. Barnes,
B. Lites,
T. Tarbell,
J. McTiernan,
G. Valori,
T. Wiegelmann,
M. S. Wheatland,
T. Amari,
G. Aulanier,
P. Demoulin,
M. Fuhrmann,
K. Kusano,
S. Regnier,
J. K. Thalmann
Abstract:
Solar flares and coronal mass ejections are associated with rapid changes in field connectivity and powered by the partial dissipation of electrical currents in the solar atmosphere. A critical unanswered question is whether the currents involved are induced by the motion of pre-existing atmospheric magnetic flux subject to surface plasma flows, or whether these currents are associated with the…
▽ More
Solar flares and coronal mass ejections are associated with rapid changes in field connectivity and powered by the partial dissipation of electrical currents in the solar atmosphere. A critical unanswered question is whether the currents involved are induced by the motion of pre-existing atmospheric magnetic flux subject to surface plasma flows, or whether these currents are associated with the emergence of flux from within the solar convective zone. We address this problem by applying state-of-the-art nonlinear force-free field (NLFFF) modeling to the highest resolution and quality vector-magnetographic data observed by the recently launched Hinode satellite on NOAA Active Region 10930 around the time of a powerful X3.4 flare. We compute 14 NLFFF models with 4 different codes and a variety of boundary conditions. We find that the model fields differ markedly in geometry, energy content, and force-freeness. We discuss the relative merits of these models in a general critique of present abilities to model the coronal magnetic field based on surface vector field measurements. For our application in particular, we find a fair agreement of the best-fit model field with the observed coronal configuration, and argue (1) that strong electrical currents emerge together with magnetic flux preceding the flare, (2) that these currents are carried in an ensemble of thin strands, (3) that the global pattern of these currents and of field lines are compatible with a large-scale twisted flux rope topology, and (4) that the ~10^32 erg change in energy associated with the coronal electrical currents suffices to power the flare and its associated coronal mass ejection.
△ Less
Submitted 30 November, 2007;
originally announced December 2007.
-
An Improved Virial Estimate of Solar Active Region Energy
Authors:
M. S. Wheatland,
T. R. Metcalf
Abstract:
The MHD virial theorem may be used to estimate the magnetic energy of active regions based on vector magnetic fields measured at the photosphere or chromosphere. However, the virial estimate depends on the measured vector magnetic field being force-free. Departure from force-freeness leads to an unknown systematic error in the virial energy estimate, and an origin dependence of the result. We pr…
▽ More
The MHD virial theorem may be used to estimate the magnetic energy of active regions based on vector magnetic fields measured at the photosphere or chromosphere. However, the virial estimate depends on the measured vector magnetic field being force-free. Departure from force-freeness leads to an unknown systematic error in the virial energy estimate, and an origin dependence of the result. We present a method for estimating the systematic error by assuming that magnetic forces are confined to a thin layer near the photosphere. If vector magnetic field measurements are available at two levels in the low atmosphere (e.g. the photosphere and the chromosphere), the systematic error may be directly calculated using the observed horizontal and vertical field gradients, resulting in an energy estimate which is independent of the choice of origin. If (as is generally the case) measurements are available at only one level, the systematic error may be approximated using the observed horizontal field gradients together with a simple linear force-free model for the vertical field gradients. The resulting `improved' virial energy estimate is independent of the choice of origin, but depends on the choice of the model for the vertical field gradients, i.e. the value of the linear force-free parameter $α$. This procedure is demonstrated for five vector magnetograms, including a chromospheric magnetogram.
△ Less
Submitted 21 September, 2005;
originally announced September 2005.
-
On the Photometric Accuracy of RHESSI Imaging and Spectrosocopy
Authors:
Markus J. Aschwanden,
Thomas R. Metcalf,
Sam Krucker,
Jun Sato,
Andrew J. Conway,
Gordon J. Hurford,
Ed. J. Schmahl
Abstract:
We compare the photometric accuracy of spectra and images in flares observed with the Ramaty High Energy Solar Spectroscopic Imager (RHESSI)}spacecraft. We test the accuracy of the photometry by comparing the photon fluxes obtained in different energy ranges from the spectral-fitting software SPEX with those fluxes contained in the images reconstructed with the Clean, MEM, MEM-Vis, Pixon, and Fo…
▽ More
We compare the photometric accuracy of spectra and images in flares observed with the Ramaty High Energy Solar Spectroscopic Imager (RHESSI)}spacecraft. We test the accuracy of the photometry by comparing the photon fluxes obtained in different energy ranges from the spectral-fitting software SPEX with those fluxes contained in the images reconstructed with the Clean, MEM, MEM-Vis, Pixon, and Forward-fit algorithms. We quantify also the background fluxes, the fidelity of source geometries, and spatial spectra reconstructed with the five image reconstruction algorithms. We investigate the effects of grid selection, pixel size, field-of-view, and time intervals on the quality of image reconstruction. The detailed parameters and statistics are provided in an accompanying CD-ROM and web page. We find that Forward-fit, Pixon, and Clean have a robust convergence behavior and a photometric accuracy in the order of a few percents, while MEM does not converge optimally for large degrees of freedom (for large field-of-views and/or small pixel sizes), and MEM-Vis suffers in the case of time-variable sources. This comparative study documents the current status of the RHESSI spectral and imaging software, one year after launch.
△ Less
Submitted 17 September, 2003;
originally announced September 2003.
