-
The homogeneous internal structure of CM-like asteroid (41) Daphne
Authors:
B. Carry,
F. Vachier,
J. Berthier,
M. Marsset,
P. Vernazza,
J. Grice,
W. J. Merline,
E. Lagadec,
A. Fienga,
A. Conrad,
E. Podlewska-Gaca,
T. Santana-Ros,
M. Viikinkoski,
J. Hanuš,
C. Dumas,
J. D. Drummond,
P. M. Tamblyn,
C. R. Chapman,
R. Behrend,
L. Bernasconi,
P. Bartczak,
Z. Benkhaldoun,
M. Birlan,
J. Castillo-Rogez,
F. Cipriani
, et al. (26 additional authors not shown)
Abstract:
Context. CM-like asteroids (Ch and Cgh classes) are a major population within the broader C-complex, encompassing about 10% of the mass of the main asteroid belt. Their internal structure has been predicted to be homogeneous, based on their compositional similarity as inferred from spectroscopy (Vernazza et al., 2016, AJ 152, 154) and numerical modeling of their early thermal evolution (Bland & Tr…
▽ More
Context. CM-like asteroids (Ch and Cgh classes) are a major population within the broader C-complex, encompassing about 10% of the mass of the main asteroid belt. Their internal structure has been predicted to be homogeneous, based on their compositional similarity as inferred from spectroscopy (Vernazza et al., 2016, AJ 152, 154) and numerical modeling of their early thermal evolution (Bland & Travis, 2017, Sci. Adv. 3, e1602514). Aims. Here we aim to test this hypothesis by deriving the density of the CM-like asteroid (41) Daphne from detailed modeling of its shape and the orbit of its small satellite. Methods. We observed Daphne and its satellite within our imaging survey with the Very Large Telescope extreme adaptive-optics SPHERE/ZIMPOL camera (ID 199.C-0074, PI P. Vernazza) and complemented this data set with earlier Keck/NIRC2 and VLT/NACO observations. We analyzed the dynamics of the satellite with our Genoid meta-heuristic algorithm. Combining our high-angular resolution images with optical lightcurves and stellar occultations, we determine the spin period, orientation, and 3-D shape, using our ADAM shape modeling algorithm. Results. The satellite orbits Daphne on an equatorial, quasi-circular, prograde orbit, like the satellites of many other large main-belt asteroids. The shape model of Daphne reveals several large flat areas that could be large impact craters. The mass determined from this orbit combined with the volume computed from the shape model implies a density for Daphne of 1.77+/-0.26 g/cm3 (3 σ). This density is consistent with a primordial CM-like homogeneous internal structure with some level of macroporosity (~17%). Conclusions. Based on our analysis of the density of Daphne and 75 other Ch/Cgh-type asteroids gathered from the literature, we conclude that the primordial internal structure of the CM parent bodies was homogeneous.
△ Less
Submitted 7 January, 2019;
originally announced January 2019.
-
Physical, spectral, and dynamical properties of asteroid (107) Camilla and its satellites
Authors:
M. Pajuelo,
B. Carry,
F. Vachier,
M. Marsset,
J. Berthier,
P. Descamps,
W. J. Merline,
P. M. Tamblyn,
J. Grice,
A. Conrad,
A. Storrs,
B. Timerson,
D. Dunham,
S. Preston,
A. Vigan,
B. Yang,
P. Vernazza,
S. Fauvaud,
L. Bernasconi,
D. Romeuf,
R. Behrend,
C. Dumas,
J. D. Drummond,
J. -L. Margot,
P. Kervella
, et al. (2 additional authors not shown)
Abstract:
The population of large asteroids is thought to be primordial and they are the most direct witnesses of the early history of our Solar System. Those satellites allow study of the mass, and hence density and internal structure. We study here the properties of the triple asteroid (107) Camilla from lightcurves, stellar occultations, optical spectroscopy, and high-contrast and high-angular-resolution…
▽ More
The population of large asteroids is thought to be primordial and they are the most direct witnesses of the early history of our Solar System. Those satellites allow study of the mass, and hence density and internal structure. We study here the properties of the triple asteroid (107) Camilla from lightcurves, stellar occultations, optical spectroscopy, and high-contrast and high-angular-resolution images and spectro-images. Using 80 positions over 15 years, we determine the orbit of its larger satellite to be circular, equatorial, and prograde, with RMS residuals of 7.8 mas. From 11 positions in three epochs only, in 2015 and 2016, we determine a preliminary orbit for the second satellite. We find the orbit to be somewhat eccentric and slightly inclined to the primary's equatorial plane, reminiscent of the inner satellites of other asteroid triple systems. Comparison of the near-infrared spectrum of the larger satellite reveals no significant difference with Camilla. Hence, these properties argue for a formation of the satellites by excavation from impact and re-accumulation of ejecta. We determine the spin and 3-D shape of Camilla. The model fits well each data set. We determine Camilla to be larger than reported from modeling of mid-infrared photometry, with a spherical-volume-equivalent diameter of 254 $\pm$ 36 km (3 $σ$ uncertainty), in agreement with recent results from shape modeling (Hanus2017+). Combining the mass of (1.12 $\pm$ 0.01) $\times$ 10$^{19}$ kg determined from the dynamics of the satellites and the volume from the 3-D shape model, we determine a density of 1,280 $\pm$ 130 SI. From this density, and considering Camilla's spectral similarities with (24) Themis and (65) Cybele (for which water ice coating on surface grains was reported), we infer a silicate-to-ice mass ratio of 1-6, with a 10-30% macroporosity.
△ Less
Submitted 7 March, 2018;
originally announced March 2018.
-
The Resolved Asteroid Program - Size, shape, and pole of (52) Europa
Authors:
W. J. Merline,
J. D. Drummond,
B. Carry,
A. Conrad,
P. M. Tamblyn,
C. Dumas,
M. Kaasalainen,
A. Erikson,
S. Mottola,
J. Durech,
G. Rousseau,
R. Behrend,
G. B. Casalnuovo,
B. Chinaglia,
J. C. Christou,
C. R. Chapman,
C. Neyman
Abstract:
With the adaptive optics (AO) system on the 10 m Keck-II telescope, we acquired a high quality set of 84 images at 14 epochs of asteroid (52) Europa on 2005 January 20. The epochs covered its rotation period and, by following its changing shape and orientation on the plane of sky, we obtained its triaxial ellipsoid dimensions and spin pole location. An independent determination from images at thre…
▽ More
With the adaptive optics (AO) system on the 10 m Keck-II telescope, we acquired a high quality set of 84 images at 14 epochs of asteroid (52) Europa on 2005 January 20. The epochs covered its rotation period and, by following its changing shape and orientation on the plane of sky, we obtained its triaxial ellipsoid dimensions and spin pole location. An independent determination from images at three epochs obtained in 2007 is in good agreement with these results. By combining these two data sets, along with a single epoch data set obtained in 2003, we have derived a global fit for (52) Europa of diameters (379x330x249) +/- (16x8x10) km, yielding a volume-equivalent spherical-diameter of 315 +/- 7 km, and a rotational pole within 7 deg of [RA; Dec] = [257,+12] in an Equatorial J2000 reference frame (ECJ2000: 255,+35). Using the average of all mass determinations available forEuropa, we derive a density of 1.5 +/- 0.4, typical of C-type asteroids. Comparing our images with the shape model of Michalowski et al. (A&A 416, 2004), derived from optical lightcurves, illustrates excellent agreement, although several edge features visible in the images are not rendered by the model. We therefore derived a complete 3-D description of Europa's shape using the KOALA algorithm by combining our imaging epochs with 4 stellar occultations and 49 lightcurves. We use this 3-D shape model to assess these departures from ellipsoidal shape. Flat facets (possible giant craters) appear to be less distinct on (52) Europa than on other C-types that have been imaged in detail. We show that fewer giant craters, or smaller craters, is consistent with its expected impact history. Overall, asteroid (52) Europa is still well modeled as a smooth triaxial ellipsoid with dimensions constrained by observations obtained over several apparitions.
△ Less
Submitted 22 January, 2013;
originally announced January 2013.
-
Shape modeling technique KOALA validated by ESA Rosetta at (21) Lutetia
Authors:
B. Carry,
M. Kaasalainen,
W. J. Merline,
T. G. Müller,
L. Jorda,
J. D. Drummond,
J. Berthier,
L. O'Rourke,
J. Durech,
M. Küppers,
A. Conrad,
P. Tamblyn,
C. Dumas,
H. Sierks,
the OSIRIS Team
Abstract:
We present a comparison of our results from ground-based observations of asteroid (21) Lutetia with imaging data acquired during the flyby of the asteroid by the ESA Rosetta mission. This flyby provided a unique opportunity to evaluate and calibrate our method of determination of size, 3-D shape, and spin of an asteroid from ground-based observations. We present our 3-D shape-modeling technique KO…
▽ More
We present a comparison of our results from ground-based observations of asteroid (21) Lutetia with imaging data acquired during the flyby of the asteroid by the ESA Rosetta mission. This flyby provided a unique opportunity to evaluate and calibrate our method of determination of size, 3-D shape, and spin of an asteroid from ground-based observations. We present our 3-D shape-modeling technique KOALA which is based on multi-dataset inversion. We compare the results we obtained with KOALA, prior to the flyby, on asteroid (21) Lutetia with the high-spatial resolution images of the asteroid taken with the OSIRIS camera on-board the ESA Rosetta spacecraft, during its encounter with Lutetia. The spin axis determined with KOALA was found to be accurate to within two degrees, while the KOALA diameter determinations were within 2% of the Rosetta-derived values. The 3-D shape of the KOALA model is also confirmed by the spectacular visual agreement between both 3-D shape models (KOALA pre- and OSIRIS post-flyby). We found a typical deviation of only 2 km at local scales between the profiles from KOALA predictions and OSIRIS images, resulting in a volume uncertainty provided by KOALA better than 10%. Radiometric techniques for the interpretation of thermal infrared data also benefit greatly from the KOALA shape model: the absolute size and geometric albedo can be derived with high accuracy, and thermal properties, for example the thermal inertia, can be determined unambiguously. We consider this to be a validation of the KOALA method. Because space exploration will remain limited to only a few objects, KOALA stands as a powerful technique to study a much larger set of small bodies using Earth-based observations.
△ Less
Submitted 27 December, 2011;
originally announced December 2011.
-
The remarkable surface homogeneity of the Dawn mission target (1) Ceres
Authors:
Benoit Carry,
Pierre Vernazza,
Christophe Dumas,
William J. Merline,
Olivier Mousis,
Philippe Rousselot,
Emmanuel Jehin,
Jean Manfroid,
Marcello Fulchignoni,
Jean-Marc Zucconi
Abstract:
Dwarf-planet (1) Ceres is one of the two targets, along with (4) Vesta, that will be studied by the NASA Dawn spacecraft via imaging, visible and near-infrared spectroscopy, and gamma-ray and neutron spectroscopy. While Ceres' visible and near-infrared disk-integrated spectra have been well characterized, little has been done about quantifying spectral variations over the surface. Any spectral var…
▽ More
Dwarf-planet (1) Ceres is one of the two targets, along with (4) Vesta, that will be studied by the NASA Dawn spacecraft via imaging, visible and near-infrared spectroscopy, and gamma-ray and neutron spectroscopy. While Ceres' visible and near-infrared disk-integrated spectra have been well characterized, little has been done about quantifying spectral variations over the surface. Any spectral variation would give us insights on the geographical variation of the composition and/or the surface age. The only work so far was that of Rivkin & Volquardsen (2010, Icarus 206, 327) who reported rotationally-resolved spectroscopic (disk-integrated) observations in the 2.2-4.0 μm range; their observations showed evidence for a relatively uniform surface. Here, we report disk-resolved observations of Ceres with SINFONI (ESO VLT) in the 1.17-1.32 μm and 1.45-2.35 μm wavelength ranges. The observations were made under excellent seeing conditions (0.6"), allowing us to reach a spatial resolution of ~75 km on Ceres' surface. We do not find any spectral variation above a 3% level, suggesting a homogeneous surface at our spatial resolution. Slight variations (about 2%) of the spectral slope are detected, geographically correlated with the albedo markings reported from the analysis of the HST and Keck disk-resolved images of Ceres (Li et al., 2006, Icarus 182, 143; Carry et al., 2008, A&A 478, 235). Given the lack of constraints on the surface composition of Ceres, however, we cannot assert the causes of these variations.
△ Less
Submitted 21 October, 2011;
originally announced October 2011.
-
Physical properties of ESA Rosetta target asteroid (21) Lutetia: Shape and flyby geometry
Authors:
B. Carry,
M. Kaasalainen,
C. Leyrat,
W. J. Merline,
J. D. Drummond,
A. Conrad,
H. A. Weaver,
P. M. Tamblyn,
C. R. Chapman,
C. Dumas,
F. Colas,
J. C. Christou,
E. Dotto,
D. Perna,
S. Fornasier,
L. Bernasconi,
R. Behrend,
F. Vachier,
A. Kryszczynska,
M. Polinska,
M. Fulchignoni,
R. Roy,
R. Naves,
R. Poncy,
P. Wiggins
Abstract:
Aims. We determine the physical properties (spin state and shape) of asteroid (21) Lutetia, target of the ESA Rosetta mission, to help in preparing for observations during the flyby on 2010 July 10 by predicting the orientation of Lutetia as seen from Rosetta.
Methods. We use our novel KOALA inversion algorithm to determine the physical properties of asteroids from a combination of optical light…
▽ More
Aims. We determine the physical properties (spin state and shape) of asteroid (21) Lutetia, target of the ESA Rosetta mission, to help in preparing for observations during the flyby on 2010 July 10 by predicting the orientation of Lutetia as seen from Rosetta.
Methods. We use our novel KOALA inversion algorithm to determine the physical properties of asteroids from a combination of optical lightcurves, disk-resolved images, and stellar occultations, although the latter are not available for (21) Lutetia.
Results. We find the spin axis of (21) Lutetia to lie within 5 degrees of (λ = 52 deg., β = -6 deg.) in Ecliptic J2000 reference frame (equatorial α = 52 deg., δ = +12 deg.), and determine an improved sidereal period of 8.168 270 \pm 0.000 001 h. This pole solution implies the southern hemisphere of Lutetia will be in "seasonal" shadow at the time of the flyby. The apparent cross-section of Lutetia is triangular as seen "pole-on" and more rectangular as seen "equator-on". The best-fit model suggests the presence of several concavities. The largest of these is close to the north pole and may be associated with large impacts.
△ Less
Submitted 17 June, 2010; v1 submitted 28 May, 2010;
originally announced May 2010.
-
The triaxial ellipsoid dimensions, rotational pole, and bulk density of ESA Rosetta target asteroid (21) Lutetia
Authors:
J. D. Drummond,
A. Conrad,
W. J. Merline,
B. Carry,
C. R. Chapman,
H. A. Weaver,
P. M. Tamblyn,
J. C. Christou,
C. Dumas
Abstract:
We seek the best size estimates of the asteroid (21) Lutetia, the direction of its spin axis, and its bulk density, assuming its shape is well described by a smooth featureless triaxial ellipsoid, and to evaluate the deviations from this assumption. Methods. We derive these quantities from the outlines of the asteroid in 307 images of its resolved apparent disk obtained with adaptive optics (AO) a…
▽ More
We seek the best size estimates of the asteroid (21) Lutetia, the direction of its spin axis, and its bulk density, assuming its shape is well described by a smooth featureless triaxial ellipsoid, and to evaluate the deviations from this assumption. Methods. We derive these quantities from the outlines of the asteroid in 307 images of its resolved apparent disk obtained with adaptive optics (AO) at Keck II and VLT, and combine these with recent mass determinations to estimate a bulk density. Our best triaxial ellipsoid diameters for Lutetia, based on our AO images alone, are a x b x c = 132 x 101 x 93 km, with uncertainties of 4 x 3 x 13 km including estimated systematics, with a rotational pole within 5 deg. of ECJ2000 [long,lat] = [45, -7], or EQJ2000 [RA, DEC] = [44, +9]. The AO model fit itself has internal precisions of 1 x 1 x 8 km, but it is evident, both from this model derived from limited viewing aspects and the radius vector model given in a companion paper, that Lutetia has significant departures from an idealized ellipsoid. In particular, the long axis may be overestimated from the AO images alone by about 10 km. Therefore, we combine the best aspects of the radius vector and ellipsoid model into a hybrid ellipsoid model, as our final result, of 124 +/- 5 x 101 +/- 4 x 93 +/- 13 km that can be used to estimate volumes, sizes, and projected areas. The adopted pole position is within 5 deg. of [long, lat] = [52, -6] or[RA DEC] = [52, +12]. Using two separately determined masses and the volume of our hybrid model, we estimate a density of 3.5 +/- 1.1 or 4.3 +/- 0.8 g cm-3 . From the density evidence alone, we argue that this favors an enstatite-chondrite composition, although other compositions are formally allowed at the extremes (low-porosity CV/CO carbonaceous chondrite or high-porosity metallic). We discuss this in the context of other evidence.
△ Less
Submitted 17 June, 2010; v1 submitted 28 May, 2010;
originally announced May 2010.
-
Ultraviolet and visible photometry of asteroid (21) Lutetia using the Hubble Space Telescope
Authors:
H. A. Weaver,
P. D. Feldman,
W. J. Merline,
M. J. Mutchler,
M. F. A'Hearn,
J. -L. Bertaux,
L. M. Feaga,
J. W. Parker,
D. C. Slater,
A. J. Steffl,
C. R. Chapman,
J. D. Drummond,
S. A. Stern
Abstract:
The asteroid (21) Lutetia is the target of a planned close encounter by the Rosetta spacecraft in July 2010. To prepare for that flyby, Lutetia has been extensively observed by a variety of astronomical facilities. We used the Hubble Space Telescope (HST) to determine the albedo of Lutetia over a wide wavelength range, extending from ~150 nm to ~700 nm. Using data from a variety of HST filters and…
▽ More
The asteroid (21) Lutetia is the target of a planned close encounter by the Rosetta spacecraft in July 2010. To prepare for that flyby, Lutetia has been extensively observed by a variety of astronomical facilities. We used the Hubble Space Telescope (HST) to determine the albedo of Lutetia over a wide wavelength range, extending from ~150 nm to ~700 nm. Using data from a variety of HST filters and a ground-based visible light spectrum, we employed synthetic photometry techniques to derive absolute fluxes for Lutetia. New results from ground-based measurements of Lutetia's size and shape were used to convert the absolute fluxes into albedos. We present our best model for the spectral energy distribution of Lutetia over the wavelength range 120-800 nm. There appears to be a steep drop in the albedo (by a factor of ~2) for wavelengths shorter than ~300 nm. Nevertheless, the far ultraviolet albedo of Lutetia (~10%) is considerably larger than that of typical C-chondrite material (~4%). The geometric albedo at 550 nm is 16.5 +/- 1%. Lutetia's reflectivity is not consistent with a metal-dominated surface at infrared or radar wavelengths, and its albedo at all wavelengths (UV-visibile-IR-radar) is larger than observed for typical primitive, chondritic material. We derive a relatively high FUV albedo of ~10%, a result that will be tested by observations with the Alice spectrograph during the Rosetta flyby of Lutetia in July 2010.
△ Less
Submitted 6 July, 2010; v1 submitted 23 December, 2009;
originally announced December 2009.
-
Physical Properties of (2) Pallas
Authors:
Benoit Carry,
Christophe Dumas,
Mikko Kaasalainen,
Jerome Berthier,
William J. Merline,
Stephane Erard,
Al Conrad,
Jack D. Drummond,
Daniel Hestroffer,
Marcello Fulchignoni,
Thierry Fusco
Abstract:
We acquired and analyzed adaptive-optics imaging observations of asteroid (2) Pallas from Keck II and the Very Large Telescope taken during four Pallas oppositions between 2003 and 2007, with spatial resolution spanning 32-88 km (image scales 13-20 km/pix). We improve our determination of the size, shape, and pole by a novel method that combines our AO data with 51 visual light-curves spanning 3…
▽ More
We acquired and analyzed adaptive-optics imaging observations of asteroid (2) Pallas from Keck II and the Very Large Telescope taken during four Pallas oppositions between 2003 and 2007, with spatial resolution spanning 32-88 km (image scales 13-20 km/pix). We improve our determination of the size, shape, and pole by a novel method that combines our AO data with 51 visual light-curves spanning 34 years of observations as well as occultation data.
The shape model of Pallas derived here reproduces well both the projected shape of Pallas on the sky and light-curve behavior at all the epochs considered. We resolved the pole ambiguity and found the spin-vector coordinates to be within 5 deg. of [long, lat] = [30 deg., -16 deg.] in the ECJ2000.0 reference frame, indicating a high obliquity of ~84 deg., leading to high seasonal contrast. The best triaxial-ellipsoid fit returns radii of a=275 km, b= 258 km, and c= 238 km. From the mass of Pallas determined by gravitational perturbation on other minor bodies [(1.2 +/- 0.3) x 10-10 Solar Masses], we derive a density of 3.4 +/- 0.9 g.cm-3 significantly different from the density of C-type (1) Ceres of 2.2 +/- 0.1 g.cm-3. Considering the spectral similarities of Pallas and Ceres at visible and near-infrared wavelengths, this may point to fundamental differences in the interior composition or structure of these two bodies.
We define a planetocentric longitude system for Pallas, following IAU guidelines. We also present the first albedo maps of Pallas covering ~80% of the surface in K-band. These maps reveal features with diameters in the 70-180 km range and an albedo contrast of about 6% wrt the mean surface albedo.
△ Less
Submitted 18 December, 2009;
originally announced December 2009.
-
Near-Infrared Mapping and Physical Properties of the Dwarf-Planet Ceres
Authors:
Benoit Carry,
Christophe Dumas,
Marcello Fulchignoni,
William J. Merline,
Jerome Berthier,
Daniel Hestroffer,
Thierry Fusco,
Peter Tamblyn
Abstract:
We study the physical characteristics (shape, dimensions, spin axis direction, albedo maps, mineralogy) of the dwarf-planet Ceres based on high-angular resolution near-infrared observations. We analyze adaptive optics J/H/K imaging observations of Ceres performed at Keck II Observatory in September 2002 with an equivalent spatial resolution of ~50 km. The spectral behavior of the main geological…
▽ More
We study the physical characteristics (shape, dimensions, spin axis direction, albedo maps, mineralogy) of the dwarf-planet Ceres based on high-angular resolution near-infrared observations. We analyze adaptive optics J/H/K imaging observations of Ceres performed at Keck II Observatory in September 2002 with an equivalent spatial resolution of ~50 km. The spectral behavior of the main geological features present on Ceres is compared with laboratory samples. Ceres' shape can be described by an oblate spheroid (a = b = 479.7 +/- 2.3 km, c = 444.4 +/- 2.1 km) with EQJ2000.0 spin vector coordinates RA = 288 +/- 5 deg. and DEC = +66 +/- 5 deg. Ceres sidereal period is measured to be 9.0741 +/- 0.0001 h. We image surface features with diameters in the 50-180 km range and an albedo contrast of ~6% with respect to the average Ceres albedo. The spectral behavior of the brightest regions on Ceres is consistent with phyllosilicates and carbonate compounds. Darker isolated regions could be related to the presence of frost.
△ Less
Submitted 7 November, 2007;
originally announced November 2007.
-
The Discovery of Two New Satellites of Pluto
Authors:
H. A. Weaver,
S. A. Stern,
M. J. Mutchler,
A. J. Steffl,
M. W. Buie,
W. J. Merline,
J. R. Spencer,
E. F. Young,
L. A. Young
Abstract:
Pluto's first known moon, Charon, was discovered in 1978 (Christy 1978) and has a diameter about half that of Pluto (Buie 1992,Young 1994, Sicardy 2005), which makes it larger relative to its primary than any other moon in the Solar System. Previous searches for other satellites around Pluto have been unsuccessful (Stern 1991, Stern 1994, Stern 2003), but they were not sensitive to objects <=150…
▽ More
Pluto's first known moon, Charon, was discovered in 1978 (Christy 1978) and has a diameter about half that of Pluto (Buie 1992,Young 1994, Sicardy 2005), which makes it larger relative to its primary than any other moon in the Solar System. Previous searches for other satellites around Pluto have been unsuccessful (Stern 1991, Stern 1994, Stern 2003), but they were not sensitive to objects <=150 km in diameter and there are no fundamental reasons why Pluto should not have more satellites (Stern 1994). Here we report the discovery of two additional moons around Pluto, provisionally designated S/2005 P1 (hereafter P1) and S/2005 P2 (hereafter P2), which makes Pluto the first Kuiper belt object (KBO) known to have multiple satellites. These new satellites are much smaller than Charon (diameter~1200 km), with P1 ranging in diameter from 60-165 km depending on the surface reflectivity, and P2 about 20% smaller than P1. Although definitive orbits cannot be derived, both new satellites appear to be moving in circular orbits in the same orbital plane as Charon, with orbital periods of ~38 days (P1) and ~25 days (P2). The implications of the discovery of P1 and P2 for the origin and evolution of the Pluto system, and for the satellite formation process in the Kuiper belt, are discussed in a companion paper (Stern 2006).
△ Less
Submitted 1 January, 2006;
originally announced January 2006.
-
Characteristics and Origin of the Quadruple System at Pluto
Authors:
S. A. Stern,
H. A. Weaver,
A. J. Steffl,
M. J. Mutchler,
W. J. Merline,
M. W. Buie,
E. F. Young,
L. A. Young,
J. R. Spencer
Abstract:
Our discovery of two new satellites of Pluto, designated S/2005 P 1 and S/2005 P 2 (henceforth, P1 and P2), combined with the constraints on the absence of more distant satellites of Pluto, reveal that Pluto and its moons comprise an unusual, highly compact, quadruple system. The two newly discovered satellites of Pluto have masses that are very small compared to both Pluto and Charon, creating…
▽ More
Our discovery of two new satellites of Pluto, designated S/2005 P 1 and S/2005 P 2 (henceforth, P1 and P2), combined with the constraints on the absence of more distant satellites of Pluto, reveal that Pluto and its moons comprise an unusual, highly compact, quadruple system. The two newly discovered satellites of Pluto have masses that are very small compared to both Pluto and Charon, creating a striking planet-satellite system architecture. These facts naturally raise the question of how this puzzling satellite system came to be. Here we show that P1 and P2's proximity to Pluto and Charon, along with their apparent locations in high-order mean-motion resonances, likely result from their being constructed from Plutonian collisional ejecta. We argue that variable optical depth dust-ice rings form sporadically in the Pluto system, and that rich satellite systems may be found, perhaps frequently, around other large Kuiper Belt objects.
△ Less
Submitted 23 December, 2005;
originally announced December 2005.
-
New Constraints on Additional Satellites of the Pluto System
Authors:
A. J. Steffl,
M. J. Mutchler,
H. A. Weaver,
S. A. Stern,
D. D. Durda,
D. Terrell,
W. J. Merline,
L. A. Young,
E. F. Young,
M. W. Buie,
J. R. Spencer
Abstract:
Observations of Pluto and its solar-tidal stability zone were made using the Advanced Camera for Surveys' (ACS) Wide Field Channel (WFC) on the Hubble Space Telescope on UT 2005 May 15 and UT 2005 May 18. Two small satellites of Pluto, provisionally designated S/2005 P 1 and S/2005 P 2, were discovered, as discussed by Weaver et al. (2006) and Stern et al. (2006a). Confirming observations of the…
▽ More
Observations of Pluto and its solar-tidal stability zone were made using the Advanced Camera for Surveys' (ACS) Wide Field Channel (WFC) on the Hubble Space Telescope on UT 2005 May 15 and UT 2005 May 18. Two small satellites of Pluto, provisionally designated S/2005 P 1 and S/2005 P 2, were discovered, as discussed by Weaver et al. (2006) and Stern et al. (2006a). Confirming observations of the newly discovered moons were obtained using the ACS in the High Resolution Channel (HRC) mode on 2006 Feb 15 (Mutchler et al. 2006). Both sets of observations provide strong constraints on the existence of any additional satellites in the Pluto system. Based on the May 2005 observations using the ACS/WFC, we place a 90%-confidence lower limit of m_V = 26.8 (m_V = 27.4 for a 50%-confidence lower limit) on the magnitude of undiscovered satellites greater than 5" (1.1x10^5 km) from Pluto. Using the 2005 Feb 15 ACS/HRC observations we place 90%-confidence lower limits on the apparent magnitude of any additional satellites of m_V = 26.4 between 3"-5" (6.9x10^4-1.1x10^5 km) from Pluto, m_V = 25.7 between 1"-3" (2.3x10^4-6.9x10^4 km) from Pluto, and m_V = 24. between 0.3"-1" (6.9x10^3-2.3x10^4 km) from Pluto. The 90%-confidence magnitude limits translate into upper limits on the diameters of undiscovered satellites of 29 km outside of 5" from Pluto, 36 km between 3"-5" from Pluto, 49 km between 1"-3" from Pluto, and 115 km between 0.3"-1" for a comet-like albedo of p_V = 0.04. If potential satellites are assumed to have a Charon-like albedo of p_V = 0.38, the diameter limits are 9 km, 12 km, 16 km, and 37 km, respectively.
△ Less
Submitted 23 May, 2006; v1 submitted 30 November, 2005;
originally announced November 2005.
-
Analysis of the First Disk-Resolved Images of Ceres from Ultraviolet Observations with the Hubble Space Telescope
Authors:
Joel Wm. Parker,
S. Alan Stern,
Peter C. Thomas,
Michel C. Festou,
William J. Merline,
Elliot F. Young,
Richard P. Binzel,
Larry A. Lebofsky
Abstract:
We present HST Faint Object Camera observations of the asteroid 1 Ceres at near-, mid-, and far-UV wavelengths (lambda = 3636, 2795, and 1621 A, respectively) obtained on 1995 June 25. The disk of Ceres is well-resolved for the first time, at a scale of ~50km. We report the detection of a large, ~250km diameter surface feature for which we propose the name ``Piazzi''; however it is presently unc…
▽ More
We present HST Faint Object Camera observations of the asteroid 1 Ceres at near-, mid-, and far-UV wavelengths (lambda = 3636, 2795, and 1621 A, respectively) obtained on 1995 June 25. The disk of Ceres is well-resolved for the first time, at a scale of ~50km. We report the detection of a large, ~250km diameter surface feature for which we propose the name ``Piazzi''; however it is presently uncertain if this feature is due to a crater, albedo variegation, or other effect. From limb fits to the images, we obtain semi-major and semi-minor axes of R_1=484.8+/-5.1km and R_2=466.4+/-5.9km, respectively, for the illumination-corrected projected ellipsoid. Although albedo features are seen, they do not allow for a definitive determination of the rotation or pole positions of Ceres, particularly because of the sparse sampling (two epochs) of the 9 hour rotation period. From full-disk integrated albedo measurements, we find that Ceres has a red spectral slope from the mid- to near-UV, and a significant blue slope shortward of the mid-UV. In spite of the presence of Piazzi, we detect no significant global differences in the integrated albedo as a function of rotational phase for the two epochs of data we obtained. From Minnaert surface fits to the near- and mid-UV images, we find an unusually large Minnaert parameter of k~0.9, suggesting a more Lambertian than lunar-like surface.
△ Less
Submitted 10 October, 2001;
originally announced October 2001.
