-
Microwave and Hard X-Ray Observations of the 2017 September 10 Solar Limb Flare
Authors:
Dale E. Gary,
Bin Chen,
Brian R. Dennis,
Gregory D. Fleishman,
Gordon J. Hurford,
Sa"m Krucker,
James M. McTiernan,
Gelu M. Nita,
Albert Y. Shih,
Stephen M. White,
Sijie Yu
Abstract:
We report the first science results from the newly completed Expanded Owens Valley Solar Array (EOVSA), which obtained excellent microwave imaging spectroscopy observations of SOL2017-09-10, a classic partially-occulted solar limb flare associated with an erupting flux rope. This event is also well-covered by the Reuven Ramaty High Energy Solar Spectroscopic Imager (RHESSI) in hard X-rays (HXRs).…
▽ More
We report the first science results from the newly completed Expanded Owens Valley Solar Array (EOVSA), which obtained excellent microwave imaging spectroscopy observations of SOL2017-09-10, a classic partially-occulted solar limb flare associated with an erupting flux rope. This event is also well-covered by the Reuven Ramaty High Energy Solar Spectroscopic Imager (RHESSI) in hard X-rays (HXRs). We present an overview of this event focusing on microwave and HXR data, both associated with high-energy nonthermal electrons, and discuss them within the context of the flare geometry and evolution revealed by extreme ultraviolet (EUV) observations from the Atmospheric Imaging Assembly aboard the Solar Dynamics Observatory (SDO/AIA). The EOVSA and RHESSI data reveal the evolving spatial and energy distribution of high-energy electrons throughout the entire flaring region. The results suggest that the microwave and HXR sources largely arise from a common nonthermal electron population, although the microwave imaging spectroscopy provides information over a much larger volume of the corona.
△ Less
Submitted 6 July, 2018;
originally announced July 2018.
-
The Multi-Instrument (EVE-RHESSI) DEM for Solar Flares, and Implications for Non-Thermal Emission
Authors:
James M. McTiernan,
Amir Caspi,
Harry P. Warren
Abstract:
Solar flare X-ray spectra are typically dominated by thermal bremsstrahlung emission in the soft X-ray ($\lesssim$10 keV) energy range; for hard X-ray energies ($\gtrsim$30 keV), emission is typically non-thermal from beams of electrons. The low-energy extent of non-thermal emission has only been loosely quantified. It has been difficult to obtain a lower limit for a possible non-thermal cutoff en…
▽ More
Solar flare X-ray spectra are typically dominated by thermal bremsstrahlung emission in the soft X-ray ($\lesssim$10 keV) energy range; for hard X-ray energies ($\gtrsim$30 keV), emission is typically non-thermal from beams of electrons. The low-energy extent of non-thermal emission has only been loosely quantified. It has been difficult to obtain a lower limit for a possible non-thermal cutoff energy due to the significantly dominant thermal emission.
Here we use solar flare data from the EUV Variability Experiment (EVE) on-board the Solar Dynamics Observatory (SDO) and X-ray data from the Reuven Ramaty High Energy Spectroscopic Imager (RHESSI) to calculate the Differential Emission Measure (DEM). This improvement over the isothermal approximation and any single-instrument DEM helps to resolve ambiguities in the range where thermal and non-thermal emission overlap, and to provide constraints on the low-energy cutoff.
In the model, thermal emission is from a DEM that is parametrized as multiple gaussians in $Log(T)$. Non-thermal emission results from a photon spectrum obtained using a thick-target emission model. Spectra for both instruments are fit simultaneously in a self-consistent manner.
Our results have been obtained using a sample of 52 large (GOES X- and M-class) solar flares observed between February 2011 and February 2013. It turns out that it is often possible to determine low-energy cutoffs early (in the first two minutes) during large flares. Cutoff energies are typically low, less than 10 keV, with most values of the lower limits in the 5--7 keV range.
△ Less
Submitted 20 May, 2019; v1 submitted 30 May, 2018;
originally announced May 2018.
-
Global Energetics of Solar Flares: V. Energy Closure in Flares and Coronal Mass Ejections
Authors:
Markus J. Aschwanden,
Amir Caspi,
Christina M. S. Cohen,
Gordon Holman,
Ju Jing,
Matthieu Kretzschmar,
Eduard P. Kontar,
James M. McTiernan,
Richard A. Mewaldt,
Aidan O'Flannagain,
Ian G. Richardson,
Daniel Ryan,
Harry P. Warren,
Yan Xu
Abstract:
In this study we synthesize the results of four previous studies on the global energetics of solar flares and associated coronal mass ejections (CMEs), which include magnetic, thermal, nonthermal, and CME energies in 399 solar M and X-class flare events observed during the first 3.5 years of the Solar Dynamics Observatory (SDO) mission. Our findings are: (1) The sum of the mean nonthermal energy o…
▽ More
In this study we synthesize the results of four previous studies on the global energetics of solar flares and associated coronal mass ejections (CMEs), which include magnetic, thermal, nonthermal, and CME energies in 399 solar M and X-class flare events observed during the first 3.5 years of the Solar Dynamics Observatory (SDO) mission. Our findings are: (1) The sum of the mean nonthermal energy of flare-accelerated particles ($E_{\mathrm{nt}}$), the energy of direct heating ($E_{\mathrm{dir}}$), and the energy in coronal mass ejections ($E_{\mathrm{CME}}$), which are the primary energy dissipation processes in a flare, is found to have a ratio of $(E_{\mathrm{nt}}+E_{\mathrm{dir}}+ E_{\mathrm{CME}})/E_{\mathrm{mag}} = 0.87 \pm 0.18$, compared with the dissipated magnetic free energy $E_{\mathrm{mag}}$, which confirms energy closure within the measurement uncertainties and corroborates the magnetic origin of flares and CMEs; (2) The energy partition of the dissipated magnetic free energy is: $0.51\pm0.17$ in nonthermal energy of $\ge 6$ keV electrons, $0.17\pm0.17$ in nonthermal $\ge 1$ MeV ions, $0.07\pm0.14$ in CMEs, and $0.07\pm0.17$ in direct heating; (3) The thermal energy is almost always less than the nonthermal energy, which is consistent with the thick-target model; (4) The bolometric luminosity in white-light flares is comparable with the thermal energy in soft X-rays (SXR); (5) Solar Energetic Particle (SEP) events carry a fraction $\approx 0.03$ of the CME energy, which is consistent with CME-driven shock acceleration; and (6) The warm-target model predicts a lower limit of the low-energy cutoff at $e_c \approx 6$ keV, based on the mean differential emission measure (DEM) peak temperature of $T_e=8.6$ MK during flares. This work represents the first statistical study that establishes energy closure in solar flare/CME events.
△ Less
Submitted 7 February, 2017; v1 submitted 4 January, 2017;
originally announced January 2017.
-
Global Energetics of Solar Flares: III. Non thermal Energies
Authors:
Markus J. Aschwanden,
Gordon Holman,
Aidan O'Flannagain,
Amir Caspi,
James M. McTiernan,
Eduard Kontar
Abstract:
This study entails the third part of a global flare energetics project, in which Ramaty High-Energy Solar Spectroscopic Imager (RHESSI) data of 191 M and X-class flare events from the first 3.5 yrs of the Solar Dynamics Observatory (SDO) mission are analyzed. We fit a thermal and a nonthermal component to RHESSI spectra, yielding the temperature of the differential emission measure (DEM) tail, the…
▽ More
This study entails the third part of a global flare energetics project, in which Ramaty High-Energy Solar Spectroscopic Imager (RHESSI) data of 191 M and X-class flare events from the first 3.5 yrs of the Solar Dynamics Observatory (SDO) mission are analyzed. We fit a thermal and a nonthermal component to RHESSI spectra, yielding the temperature of the differential emission measure (DEM) tail, the nonthermal power law slope and flux, and the thermal/nonthermal cross-over energy $e_{\mathrm{co}}$. From these parameters we calculate the total nonthermal energy $E_{\mathrm{nt}}$ in electrons with two different methods: (i) using the observed cross-over energy $e_{\mathrm{co}}$ as low-energy cutoff, and (ii) using the low-energy cutoff $e_{\mathrm{wt}}$ predicted by the warm thick-target bremsstrahlung model of Kontar et al. {\bf Based on a mean temperature of $T_e=8.6$ MK in active regions we find low-energy cutoff energies of $e_{\mathrm{wt}} =6.2\pm 1.6$ keV for the warm-target model, which is significantly lower than the cross-over energies $e_{\mathrm{co}}=21 \pm 6$ keV. Comparing with the statistics of magnetically dissipated energies $E_{\mathrm{mag}}$ and thermal energies $E_{\mathrm{th}}$ from the two previous studies, we find the following mean (logarithmic) energy ratios with the warm-target model: $E_{\mathrm{nt}} = 0.41 \ E_{\mathrm{mag}}$, $E_{\mathrm{th}} = 0.08 \ E_{\mathrm{mag}}$, and $E_{\mathrm{th}} = 0.15 \ E_{\mathrm{nt}}$. The total dissipated magnetic energy exceeds the thermal energy in 95% and the nonthermal energy in 71% of the flare events, which confirms that magnetic reconnection processes are sufficient to explain flare energies. The nonthermal energy exceeds the thermal energy in 85\% of the events, which largely confirms the warm thick-target model.
△ Less
Submitted 15 August, 2016; v1 submitted 21 July, 2016;
originally announced July 2016.
-
Benchmark Test of Differential Emission Measure Codes and Multi-Thermal Energies in Solar Active Regions
Authors:
M. J. Aschwanden,
P. Boerner,
A. Caspi,
J. M. McTiernan,
D. Ryan,
H. P. Warren
Abstract:
We compare the ability of 11 Differential Emission Measure (DEM) forward-fitting and inversion methods to constrain the properties of active regions and solar flares by simulating synthetic data using the instrumental response functions of SDO/AIA, SDO/EVE, RHESSI, and GOES/XRS. The codes include the single-Gaussian DEM, a bi-Gaussian DEM, a fixed-Gaussian DEM, a linear spline DEM, the spatial syn…
▽ More
We compare the ability of 11 Differential Emission Measure (DEM) forward-fitting and inversion methods to constrain the properties of active regions and solar flares by simulating synthetic data using the instrumental response functions of SDO/AIA, SDO/EVE, RHESSI, and GOES/XRS. The codes include the single-Gaussian DEM, a bi-Gaussian DEM, a fixed-Gaussian DEM, a linear spline DEM, the spatial synthesis DEM, the Monte-Carlo Markov chain DEM, the regularized DEM inversion, the Hinode/XRT method, a polynomial spline DEM, an EVE+GOES, and an EVE+RHESSI method. Averaging the results from all 11 DEM methods, we find the following accuracies in the inversion of physical parameters: the EM-weighted temperature $T_w^{fit}/T_w^{sim}=0.9\pm0.1$, the peak emission measure $EM_p^{fit}/EM_p^{sim}=0.6\pm0.2$, the total emission measure $EM_t^{fit}/EM_t^{sim}=0.8\pm0.3$, and the multi-thermal energies $E_{th}^{fit}/EM_{th}^{sim}=1.2\pm0.4$. We find that the AIA spatial synthesis, the EVE+GOES, and the EVE+RHESSI method yield the most accurate results.
△ Less
Submitted 24 September, 2015;
originally announced September 2015.
-
Hard X-Ray Imaging of Individual Spectral Components in Solar Flares
Authors:
Amir Caspi,
Albert Y. Shih,
James M. McTiernan,
Säm Krucker
Abstract:
We present a new analytical technique, combining Reuven Ramaty High Energy Solar Spectroscopic Imager (RHESSI) high-resolution imaging and spectroscopic observations, to visualize solar flare emission as a function of spectral component (e.g., isothermal temperature) rather than energy. This computationally inexpensive technique is applicable to all spatially-invariant spectral forms and is useful…
▽ More
We present a new analytical technique, combining Reuven Ramaty High Energy Solar Spectroscopic Imager (RHESSI) high-resolution imaging and spectroscopic observations, to visualize solar flare emission as a function of spectral component (e.g., isothermal temperature) rather than energy. This computationally inexpensive technique is applicable to all spatially-invariant spectral forms and is useful for visualizing spectroscopically-determined individual sources and placing them in context, e.g., comparing multiple isothermal sources with nonthermal emission locations. For example, while extreme ultraviolet images can usually be closely identified with narrow temperature ranges, due to the emission being primarily from spectral lines of specific ion species, X-ray images are dominated by continuum emission and therefore have a broad temperature response, making it difficult to identify sources of specific temperatures regardless of the energy band of the image. We combine RHESSI calibrated X-ray visibilities with spatially-integrated spectral models including multiple isothermal components to effectively isolate the individual thermal sources from the combined emission and image them separately. We apply this technique to the 2002 July 23 X4.8 event studied in prior works, and image for the first time the super-hot and cooler thermal sources independently. The super-hot source is farther from the footpoints and more elongated throughout the impulsive phase, consistent with an in situ heating mechanism for the super-hot plasma.
△ Less
Submitted 24 August, 2015;
originally announced August 2015.
-
Global Energetics of Solar Flares: II. Thermal Energies
Authors:
M. J. Aschwanden,
P. Boerner,
D. Ryan,
A. Caspi,
J. M. McTiernan,
H. P. Warren
Abstract:
We present the second part of a project on the global energetics of solar flares and CMEs that includes about 400 M- and X-class flares observed with AIA/SDO during the first 3.5 years of its mission. In this Paper II we compute the differential emission measure (DEM) distribution functions and associated multi-thermal energies, using a spatially-synthesized Gaussian DEM forward-fitting method. Th…
▽ More
We present the second part of a project on the global energetics of solar flares and CMEs that includes about 400 M- and X-class flares observed with AIA/SDO during the first 3.5 years of its mission. In this Paper II we compute the differential emission measure (DEM) distribution functions and associated multi-thermal energies, using a spatially-synthesized Gaussian DEM forward-fitting method. The multi-thermal DEM function yields a significantly higher (by an average factor of $\approx 14$), but more comprehensive (multi-)thermal energy than an isothermal energy estimate from the same AIA data. We find a statistical energy ratio of $E_{th}/E_{diss} \approx 2\%-40\%$ between the multi-thermal energy $E_{th}$ and the magnetically dissipated energy $E_{diss}$, which is an order of magnitude higher than the estimates of Emslie et al.~2012. For the analyzed set of M and X-class flares we find the following physical parameter ranges: $L=10^{8.2}-10^{9.7}$ cm for the length scale of the flare areas, $T_p=10^{5.7}-10^{7.4}$ K for the DEM peak temperature, $T_w=10^{6.8}-10^{7.6}$ K for the emission measure-weighted temperature, $n_p=10^{10.3}-10^{11.8}$ cm$^{-3}$ for the average electron density, $EM_p=10^{47.3}-10^{50.3}$ cm$^{-3}$ for the DEM peak emission measure, and $E_{th}=10^{26.8}-10^{32.0}$ erg for the multi-thermal energies. The deduced multi-thermal energies are consistent with the RTV scaling law $E_{th,RTV} = 7.3 \times 10^{-10} \ T_p^3 L_p^2$, which predicts extremal values of $E_{th,max} \approx 1.5 \times 10^{33}$ erg for the largest flare and $E_{th,min} \approx 1 \times 10^{24}$ erg for the smallest coronal nanoflare. The size distributions of the spatial parameters exhibit powerlaw tails that are consistent with the predictions of the fractal-diffusive self-organized criticality model combined with the RTV scaling law.
△ Less
Submitted 20 February, 2015;
originally announced February 2015.
-
arXiv:1405.7068
[pdf]
astro-ph.SR
astro-ph.HE
astro-ph.IM
physics.plasm-ph
physics.space-ph
Constraining Solar Flare Differential Emission Measures with EVE and RHESSI
Authors:
Amir Caspi,
James M. McTiernan,
Harry P. Warren
Abstract:
Deriving a well-constrained differential emission measure (DEM) distribution for solar flares has historically been difficult, primarily because no single instrument is sensitive to the full range of coronal temperatures observed in flares, from $\lesssim$2 to $\gtrsim$50 MK. We present a new technique, combining extreme ultraviolet (EUV) spectra from the EUV Variability Experiment (EVE) onboard t…
▽ More
Deriving a well-constrained differential emission measure (DEM) distribution for solar flares has historically been difficult, primarily because no single instrument is sensitive to the full range of coronal temperatures observed in flares, from $\lesssim$2 to $\gtrsim$50 MK. We present a new technique, combining extreme ultraviolet (EUV) spectra from the EUV Variability Experiment (EVE) onboard the Solar Dynamics Observatory with X-ray spectra from the Reuven Ramaty High Energy Solar Spectroscopic Imager (RHESSI), to derive, for the first time, a self-consistent, well-constrained DEM for jointly-observed solar flares. EVE is sensitive to ~2-25 MK thermal plasma emission, and RHESSI to $\gtrsim$10 MK; together, the two instruments cover the full range of flare coronal plasma temperatures. We have validated the new technique on artificial test data, and apply it to two X-class flares from solar cycle 24 to determine the flare DEM and its temporal evolution; the constraints on the thermal emission derived from the EVE data also constrain the low-energy cutoff of the non-thermal electrons, a crucial parameter for flare energetics. The DEM analysis can also be used to predict the soft X-ray flux in the poorly-observed ~0.4-5 nm range, with important applications for geospace science.
△ Less
Submitted 27 May, 2014;
originally announced May 2014.
-
Photospheric Magnetic Evolution in the WHI Active Regions
Authors:
B. T. Welsch,
S. Christe,
J. M. McTiernan
Abstract:
Sequences of line-of-sight (LOS) magnetograms recorded by the Michelson-Doppler Imager are used to quantitatively characterize photospheric magnetic structure and evolution in three active regions that rotated across the Sun's disk during the Whole Heliosphere Interval (WHI), in an attempt to relate the photospheric magnetic properties of these active regions to flares and coronal mass ejections (…
▽ More
Sequences of line-of-sight (LOS) magnetograms recorded by the Michelson-Doppler Imager are used to quantitatively characterize photospheric magnetic structure and evolution in three active regions that rotated across the Sun's disk during the Whole Heliosphere Interval (WHI), in an attempt to relate the photospheric magnetic properties of these active regions to flares and coronal mass ejections (CMEs). Several approaches are used in our analysis, on scales ranging from whole active regions, to magnetic features, to supergranular scales, and, finally, to individual pixels. We calculated several parameterizations of magnetic structure and evolution that have previously been associated with flare and CME activity, including total unsigned magnetic flux, magnetic flux near polarity inversion lines, amount of cancelled flux, the "proxy Poynting flux," and helicity flux. To catalog flare events, we used flare lists derived from both GOES and RHESSI observations. By most such measures, AR 10988 should have been the most flare- and CME-productive active region, and AR 10989 the least. Observations, however, were not consistent with this expectation: ARs 10988 and 10989 produced similar numbers of flares, and AR 10989 also produced a few CMEs. These results highlight present limitations of statistics-based flare and CME forecasting tools that rely upon line-of-sight photospheric magnetic data alone.
△ Less
Submitted 24 March, 2011; v1 submitted 11 March, 2011;
originally announced March 2011.
-
Reconciliation of Waiting Time Statistics of Solar Flares Observed in Hard X-Rays
Authors:
Markus J. Aschwanden,
James M. McTiernan
Abstract:
We study the waiting time distributions of solar flares observed in hard X-rays with ISEE-3/ICE, HXRBS/SMM, WATCH/GRANAT, BATSE/CGRO, and RHESSI. Although discordant results and interpretations have been published earlier, based on relatively small ranges ($< 2$ decades) of waiting times, we find that all observed distributions, spanning over 6 decades of waiting times (…
▽ More
We study the waiting time distributions of solar flares observed in hard X-rays with ISEE-3/ICE, HXRBS/SMM, WATCH/GRANAT, BATSE/CGRO, and RHESSI. Although discordant results and interpretations have been published earlier, based on relatively small ranges ($< 2$ decades) of waiting times, we find that all observed distributions, spanning over 6 decades of waiting times ($Δt \approx 10^{-3}- 10^3$ hrs), can be reconciled with a single distribution function, $N(Δt) \propto λ_0 (1 + λ_0 Δt)^{-2}$, which has a powerlaw slope of $p \approx 2.0$ at large waiting times ($Δt \approx 1-1000$ hrs) and flattens out at short waiting times $Δt \lapprox Δt_0 = 1/λ_0$. We find a consistent breakpoint at $Δt_0 = 1/λ_0 = 0.80\pm0.14$ hours from the WATCH, HXRBS, BATSE, and RHESSI data. The distribution of waiting times is invariant for sampling with different flux thresholds, while the mean waiting time scales reciprocically with the number of detected events, $Δt_0 \propto 1/n_{det}$. This waiting time distribution can be modeled with a nonstationary Poisson process with a flare rate $λ=1/Δt$ that varies as $f(λ) \propto λ^{-1} \exp{-(λ/λ_0)}$. This flare rate distribution represents a highly intermittent flaring productivity in short clusters with high flare rates, separated by quiescent intervals with very low flare rates.
△ Less
Submitted 25 February, 2010;
originally announced February 2010.
-
Comparison of Hinode/XRT and RHESSI detection of hot plasma in the non-flaring solar corona
Authors:
F. Reale,
J. M. McTiernan,
P. Testa
Abstract:
We compare observations of the non-flaring solar corona made simultaneously with Hinode/XRT and with RHESSI. The analyzed corona is dominated by a single active region on 12 November 2006. The comparison is made on emission measures. We derive emission measure distributions vs temperature of the entire active region from multifilter XRT data. We check the compatibility with the total emission me…
▽ More
We compare observations of the non-flaring solar corona made simultaneously with Hinode/XRT and with RHESSI. The analyzed corona is dominated by a single active region on 12 November 2006. The comparison is made on emission measures. We derive emission measure distributions vs temperature of the entire active region from multifilter XRT data. We check the compatibility with the total emission measure values estimated from the flux measured with RHESSI if the emission come from isothermal plasma. We find that RHESSI and XRT data analyses consistently point to the presence of a minor emission measure component peaking at log T ~ 6.8-6.9. The discrepancy between XRT and RHESSI results is within a factor of a few and indicates an acceptable level of cross-consistency.
△ Less
Submitted 14 September, 2009;
originally announced September 2009.
-
A Critical Assessment of Nonlinear Force-Free Field Modeling of the Solar Corona for Active Region 10953
Authors:
Marc L. DeRosa,
Carolus J. Schrijver,
Graham Barnes,
K. D. Leka,
Bruce W. Lites,
Markus J. Aschwanden,
Tahar Amari,
Aurelien Canou,
James M. McTiernan,
Stephane Regnier,
Julia K. Thalmann,
Gherardo Valori,
Michael S. Wheatland,
Thomas Wiegelmann,
Mark C. M. Cheung,
Paul A. Conlon,
Marcel Fuhrmann,
Bernd Inhester,
Tilaye Tadesse
Abstract:
Nonlinear force-free field (NLFFF) models are thought to be viable tools for investigating the structure, dynamics and evolution of the coronae of solar active regions. In a series of NLFFF modeling studies, we have found that NLFFF models are successful in application to analytic test cases, and relatively successful when applied to numerically constructed Sun-like test cases, but they are less…
▽ More
Nonlinear force-free field (NLFFF) models are thought to be viable tools for investigating the structure, dynamics and evolution of the coronae of solar active regions. In a series of NLFFF modeling studies, we have found that NLFFF models are successful in application to analytic test cases, and relatively successful when applied to numerically constructed Sun-like test cases, but they are less successful in application to real solar data. Different NLFFF models have been found to have markedly different field line configurations and to provide widely varying estimates of the magnetic free energy in the coronal volume, when applied to solar data. NLFFF models require consistent, force-free vector magnetic boundary data. However, vector magnetogram observations sampling the photosphere, which is dynamic and contains significant Lorentz and buoyancy forces, do not satisfy this requirement, thus creating several major problems for force-free coronal modeling efforts. In this article, we discuss NLFFF modeling of NOAA Active Region 10953 using Hinode/SOT-SP, Hinode/XRT, STEREO/SECCHI-EUVI, and SOHO/MDI observations, and in the process illustrate the three such issues we judge to be critical to the success of NLFFF modeling: (1) vector magnetic field data covering larger areas are needed so that more electric currents associated with the full active regions of interest are measured, (2) the modeling algorithms need a way to accommodate the various uncertainties in the boundary data, and (3) a more realistic physical model is needed to approximate the photosphere-to-corona interface in order to better transform the forced photospheric magnetograms into adequate approximations of nearly force-free fields at the base of the corona. We make recommendations for future modeling efforts to overcome these as yet unsolved problems.
△ Less
Submitted 5 February, 2009;
originally announced February 2009.
-
Looptop Hard X-Ray Emission in Solar Flares: Images and Statistics
Authors:
Vahe' Petrosian,
Timothy Q. Donaghy,
James M. McTiernan
Abstract:
The discovery of hard X-ray sources near the top of a flaring loop by the HXT instrument on board the YOHKOH satellite represents a significant progress towards the understanding of the basic processes driving solar flares. In this paper we extend the previous study of limb flares by Masuda (1994) by including all YOHKOH observations up through August 1998. We report that from October 1991 to Au…
▽ More
The discovery of hard X-ray sources near the top of a flaring loop by the HXT instrument on board the YOHKOH satellite represents a significant progress towards the understanding of the basic processes driving solar flares. In this paper we extend the previous study of limb flares by Masuda (1994) by including all YOHKOH observations up through August 1998. We report that from October 1991 to August 1998, YOHKOH observed 20 X-ray bright limb flares (where we use the same selection criteria as Masuda), of which we have sufficient data to analyze 18 events, including 8 previously unanalyzed flares. Of these 18 events, 15 show detectable impulsive looptop emission. Considering that the finite dynamic range (about a decade) of the detection introduces a strong bias against observing comparatively weak looptop sources, we conclude that looptop emission is a common feature of all flares. We summarize the observations of the footpoint to looptop flux ratio and the spectral indices. We present light curves and images of all the important newly analyzed limb flares. Whenever possible we present results for individual pulses in multipeak flares and for different loops for multiloop flares. We then discuss the statistics of the fluxes and spectral indices of the looptop and footpoint sources taking into account observational selection biases. The importance of these observations (and those expected from the scheduled HESSI satellite with its superior angular spectral and temporal resolution) in constraining acceleration models and parameters is discussed briefly.
△ Less
Submitted 14 December, 2001;
originally announced December 2001.
