-
Scaling slowly rotating asteroids by stellar occultations
Authors:
A. Marciniak,
J. Ďurech,
A. Choukroun,
J. Hanuš,
W. Ogłoza,
R. Szakáts,
L. Molnár,
A. Pál,
F. Monteiro,
E. Frappa,
W. Beisker,
H. Pavlov,
J. Moore,
R. Adomavičienė,
R. Aikawa,
S. Andersson,
P. Antonini,
Y. Argentin,
A. Asai,
P. Assoignon,
J. Barton,
P. Baruffetti,
K. L. Bath,
R. Behrend,
L. Benedyktowicz
, et al. (154 additional authors not shown)
Abstract:
As evidenced by recent survey results, majority of asteroids are slow rotators (P>12 h), but lack spin and shape models due to selection bias. This bias is skewing our overall understanding of the spins, shapes, and sizes of asteroids, as well as of their other properties. Also, diameter determinations for large (>60km) and medium-sized asteroids (between 30 and 60 km) often vary by over 30% for m…
▽ More
As evidenced by recent survey results, majority of asteroids are slow rotators (P>12 h), but lack spin and shape models due to selection bias. This bias is skewing our overall understanding of the spins, shapes, and sizes of asteroids, as well as of their other properties. Also, diameter determinations for large (>60km) and medium-sized asteroids (between 30 and 60 km) often vary by over 30% for multiple reasons.
Our long-term project is focused on a few tens of slow rotators with periods of up to 60 hours. We aim to obtain their full light curves and reconstruct their spins and shapes. We also precisely scale the models, typically with an accuracy of a few percent.
We used wide sets of dense light curves for spin and shape reconstructions via light-curve inversion. Precisely scaling them with thermal data was not possible here because of poor infrared data: large bodies are too bright for WISE mission. Therefore, we recently launched a campaign among stellar occultation observers, to scale these models and to verify the shape solutions, often allowing us to break the mirror pole ambiguity.
The presented scheme resulted in shape models for 16 slow rotators, most of them for the first time. Fitting them to stellar occultations resolved previous inconsistencies in size determinations. For around half of the targets, this fitting also allowed us to identify a clearly preferred pole solution, thus removing the ambiguity inherent to light-curve inversion. We also address the influence of the uncertainty of the shape models on the derived diameters.
Overall, our project has already provided reliable models for around 50 slow rotators. Such well-determined and scaled asteroid shapes will, e.g. constitute a solid basis for density determinations when coupled with mass information. Spin and shape models continue to fill the gaps caused by various biases.
△ Less
Submitted 13 October, 2023;
originally announced October 2023.
-
A large topographic feature on the surface of the trans-Neptunian object (307261) 2002 MS$_4$ measured from stellar occultations
Authors:
F. L. Rommel,
F. Braga-Ribas,
J. L. Ortiz,
B. Sicardy,
P. Santos-Sanz,
J. Desmars,
J. I. B. Camargo,
R. Vieira-Martins,
M. Assafin,
B. E. Morgado,
R. C. Boufleur,
G. Benedetti-Rossi,
A. R. Gomes-Júnior,
E. Fernández-Valenzuela,
B. J. Holler,
D. Souami,
R. Duffard,
G. Margoti,
M. Vara-Lubiano,
J. Lecacheux,
J. L. Plouvier,
N. Morales,
A. Maury,
J. Fabrega,
P. Ceravolo
, et al. (179 additional authors not shown)
Abstract:
This work aims at constraining the size, shape, and geometric albedo of the dwarf planet candidate 2002 MS4 through the analysis of nine stellar occultation events. Using multichord detection, we also studied the object's topography by analyzing the obtained limb and the residuals between observed chords and the best-fitted ellipse. We predicted and organized the observational campaigns of nine st…
▽ More
This work aims at constraining the size, shape, and geometric albedo of the dwarf planet candidate 2002 MS4 through the analysis of nine stellar occultation events. Using multichord detection, we also studied the object's topography by analyzing the obtained limb and the residuals between observed chords and the best-fitted ellipse. We predicted and organized the observational campaigns of nine stellar occultations by 2002 MS4 between 2019 and 2022, resulting in two single-chord events, four double-chord detections, and three events with three to up to sixty-one positive chords. Using 13 selected chords from the 8 August 2020 event, we determined the global elliptical limb of 2002 MS4. The best-fitted ellipse, combined with the object's rotational information from the literature, constrains the object's size, shape, and albedo. Additionally, we developed a new method to characterize topography features on the object's limb. The global limb has a semi-major axis of 412 $\pm$ 10 km, a semi-minor axis of 385 $\pm$ 17 km, and the position angle of the minor axis is 121 $^\circ$ $\pm$ 16$^\circ$. From this instantaneous limb, we obtained 2002 MS4's geometric albedo and the projected area-equivalent diameter. Significant deviations from the fitted ellipse in the northernmost limb are detected from multiple sites highlighting three distinct topographic features: one 11 km depth depression followed by a 25$^{+4}_{-5}$ km height elevation next to a crater-like depression with an extension of 322 $\pm$ 39 km and 45.1 $\pm$ 1.5 km deep. Our results present an object that is $\approx$138 km smaller in diameter than derived from thermal data, possibly indicating the presence of a so-far unknown satellite. However, within the error bars, the geometric albedo in the V-band agrees with the results published in the literature, even with the radiometric-derived albedo.
△ Less
Submitted 23 August, 2023; v1 submitted 15 August, 2023;
originally announced August 2023.
-
Reaching sub-millisecond accuracy in stellar occultations and artificial satellites tracking
Authors:
K. Kamiński,
C. Weber,
A. Marciniak,
M. Żołnowski,
M. Gędek
Abstract:
In recent years there appeared a need for astronomical observations timed with sub-millisecond accuracy. These include e.g. timing stellar occultations by small, sub-km or fast Near Earth Asteroids, but also tracking artificial satellites at Low Earth Orbit using optical sensors. Precise astrometry of fast-moving satellites, and accurate timing of stellar occultations have parallel needs, requirin…
▽ More
In recent years there appeared a need for astronomical observations timed with sub-millisecond accuracy. These include e.g. timing stellar occultations by small, sub-km or fast Near Earth Asteroids, but also tracking artificial satellites at Low Earth Orbit using optical sensors. Precise astrometry of fast-moving satellites, and accurate timing of stellar occultations have parallel needs, requiring reliable time source and good knowledge of camera delays. Thus a need for an external device that would enable equipment and camera testing, to check if they reach the required accuracy in time. We designed, constructed and thoroughly tested a New EXposure Timing Analyser (NEXTA): a GNSS-based precise timer (Global Navigation Satellite System), allowing to reach the accuracy of 0.1 millisecond, which is an order of magnitude better than in previously available tools. The device is a simple strip of blinking diodes, to be imaged with a camera under test and compare imaged time with internal camera time stamp. Our tests spanned a range of scientific cameras widely used for stellar occultations and ground-based satellite tracking. The results revealed high reliability of both NEXTA and most of the tested cameras, but also pointed that practically all cameras had internal time bias of various level. NEXTA can serve the community, being easily reproducible with inexpensive components. We provide all the necessary schemes and usage instructions.
△ Less
Submitted 16 January, 2023;
originally announced January 2023.
-
Asteroid spin-states of a 4 Gyr collisional family
Authors:
D. Athanasopoulos,
J. Hanus,
C. Avdellidou,
R. Bonamico,
M. Delbo,
M. Conjat,
A. Ferrero,
K. Gazeas,
J. P. Rivet,
N. Sioulas,
G. van Belle,
P. Antonini,
M. Audejean,
R. Behrend,
L. Bernasconi,
J. W. Brinsfield,
S. Brouillard,
L. Brunetto,
M. Fauvaud,
S. Fauvaud,
R. González,
D. Higgins,
T. W. -S. Holoien,
G. Kobber,
R. A. Koff
, et al. (7 additional authors not shown)
Abstract:
Families of asteroids generated by the collisional fragmentation of a common parent body have been identified using clustering methods of asteroids in their proper orbital element space. An alternative method has been developed in order to identify collisional families from the correlation between the asteroid fragment sizes and their proper semi-major axis distance from the family centre (V-shape…
▽ More
Families of asteroids generated by the collisional fragmentation of a common parent body have been identified using clustering methods of asteroids in their proper orbital element space. An alternative method has been developed in order to identify collisional families from the correlation between the asteroid fragment sizes and their proper semi-major axis distance from the family centre (V-shape). This method has been shown to be effective in the cases of the very diffuse families that formed billions of years ago. We obtained photometric observations of asteroids in order to construct their rotational light curves; we combine them with the literature light curves and sparse-in-time photometry; we input these data in the light curve inversion methods to determine the shape and the spin pole of the asteroids in order to assess whether an object is prograde or retrograde. The ultimate goal is to assess whether we find an excess of retrograde asteroids on the inward side of the V-shape of a 4 Gyr asteroid family identified via the V-shape method. This excess of retrograde rotators is predicted by the theory of asteroid family evolution. We obtained the spin poles for 55 asteroids claimed to belong to a 4 Gyr collisional family of the inner main belt that consists of low-albedo asteroids. After re-evaluating the albedo and spectroscopic information, we found that nine of these asteroids are interlopers in the 4 Gyr family. Of the 46 remaining asteroids, 31 are found to be retrograde and 15 prograde. We also found that these retrograde rotators have a very low probability (1.29%) of being due to random sampling from an underlying uniform distribution of spin poles. Our results constitute corroborating evidence that the asteroids identified as members of a 4 Gyr collisional family have a common origin, thus strengthening their family membership.
△ Less
Submitted 5 October, 2022;
originally announced October 2022.
-
Studying the interaction between VUV photons and PAHs in relevant astrophysical conditions
Authors:
A Marciniak,
A Bonnamy,
S Zamith,
L Noguès,
O Coeur-Joly,
D Murat,
P Moretto-Capelle,
J. -M l'Hermite,
G Mulas,
C Joblin
Abstract:
PIRENEA and PIRENEA 2 are experimental setups dedicated to the study of fundamental molecular processes involving species of astrochemical interest. The coupling of a VUV source to PIRENEA has allowed us to study the fragmentation pathways and stability of polycyclic aromatic hydrocarbons (PAHs) containing aliphatic bonds under conditions relevant for astrophysical photodissociation regions. PIRE-…
▽ More
PIRENEA and PIRENEA 2 are experimental setups dedicated to the study of fundamental molecular processes involving species of astrochemical interest. The coupling of a VUV source to PIRENEA has allowed us to study the fragmentation pathways and stability of polycyclic aromatic hydrocarbons (PAHs) containing aliphatic bonds under conditions relevant for astrophysical photodissociation regions. PIRE-NEA 2 will open the possibility to extend these studies to larger systems such as PAH clusters, and more generally to study gas-nanograin-photon interactions.
△ Less
Submitted 19 August, 2022;
originally announced August 2022.
-
Physical properties of the trans-Neptunian object (38628) Huya from a multi-chord stellar occultation
Authors:
P. Santos-Sanz,
J. L. Ortiz,
B. Sicardy,
M. Popescu,
G. Benedetti-Rossi,
N. Morales,
M. Vara-Lubiano,
J. I. B. Camargo,
C. L. Pereira,
F. L. Rommel,
M. Assafin,
J. Desmars,
F. Braga-Ribas,
R. Duffard,
J. Marques Oliveira,
R. Vieira-Martins,
E. Fernández-Valenzuela,
B. E. Morgado,
M. Acar,
S. Anghel,
E. Atalay,
A. Ateş,
H. Bakış,
V. Bakış,
Z. Eker
, et al. (63 additional authors not shown)
Abstract:
Within our international program to obtain accurate physical properties of trans-Neptunian objects (TNOs) we predicted a stellar occultation by the TNO (38628) Huya of the star Gaia DR2 4352760586390566400 (mG = 11.5 mag.) for March 18, 2019. After an extensive observational campaign, we updated the prediction and it turned out to be favorable to central Europe. Therefore, we mobilized half a hund…
▽ More
Within our international program to obtain accurate physical properties of trans-Neptunian objects (TNOs) we predicted a stellar occultation by the TNO (38628) Huya of the star Gaia DR2 4352760586390566400 (mG = 11.5 mag.) for March 18, 2019. After an extensive observational campaign, we updated the prediction and it turned out to be favorable to central Europe. Therefore, we mobilized half a hundred professional and amateur astronomers, and the occultation was finally detected from 21 telescopes located at 18 sites. This makes the Huya event one of the best ever observed stellar occultation by a TNO in terms of the number of chords. We determine accurate size, shape, and geometric albedo, and we also provide constraints on the density and other internal properties of this TNO. The 21 positive detections of the occultation by Huya allowed us to obtain well-separated chords which permitted us to fit an ellipse for the limb of the body at the moment of the occultation (i.e., the instantaneous limb) with kilometric accuracy. The projected semi-major and minor axes of the best ellipse fit obtained using the occultation data are (a', b') = (217.6 $\pm$ 3.5 km, 194.1 $\pm$ 6.1 km) with a position angle of the minor axis P' = 55.2 $\pm$ 9.1 degrees. From this fit, the projected area-equivalent diameter is 411.0 $\pm$ 7.3 km. This diameter is compatible with the equivalent diameter for Huya obtained from radiometric techniques (D = 406 $\pm$ 16 km). From this instantaneous limb, we obtained the geometric albedo for Huya (p$\rm_V$ = 0.079 $\pm$ 0.004) and we explored possible 3D shapes and constraints to the mass density for this TNO. We did not detect the satellite of Huya through this occultation, but the presence of rings or debris around Huya is constrained using the occultation data. We also derived an upper limit for a putative Pluto-like global atmosphere of about p$_{\rm surf}$ = 10 nbar.
△ Less
Submitted 30 May, 2022; v1 submitted 25 May, 2022;
originally announced May 2022.
-
Asteroid phase curves using sparse Gaia DR2 data and differential dense light curves
Authors:
E. Wilawer,
D. Oszkiewicz,
A. Kryszczyńska,
A. Marciniak,
V. Shevchenko,
I. Belskaya,
T. Kwiatkowski,
P. Kankiewicz,
J. Horbowicz,
V. Kudak,
P. Kulczak,
V. Perig,
K. Sobkowiak
Abstract:
The amount of sparse asteroid photometry being gathered by both space- and ground-based surveys is growing exponentially. This large volume of data poses a computational challenge owing to both the large amount of information to be processed and the new methods needed to combine data from different sources (e.g. obtained by different techniques, in different bands, and having different random and…
▽ More
The amount of sparse asteroid photometry being gathered by both space- and ground-based surveys is growing exponentially. This large volume of data poses a computational challenge owing to both the large amount of information to be processed and the new methods needed to combine data from different sources (e.g. obtained by different techniques, in different bands, and having different random and systematic errors). The main goal of this work is to develop an algorithm capable of merging sparse and dense data sets, both relative and differential, in preparation for asteroid observations originating from, for example, Gaia, TESS, ATLAS, LSST, K2, VISTA, and many other sources. We present a novel method to obtain asteroid phase curves by combining sparse photometry and differential ground-based photometry. In the traditional approach, the latter cannot be used for phase curves. Merging those two data types allows for the extraction of phase-curve information for a growing number of objects. Our method is validated for 26 sample asteroids observed by the Gaia mission.
△ Less
Submitted 23 May, 2022;
originally announced May 2022.
-
Refinement of the convex shape model and tumbling spin state of (99942) Apophis using the 2020-2021 apparition data
Authors:
H. -J. Lee,
M. -J. Kim,
A. Marciniak,
D. -H. Kim,
H. -K. Moon,
Y. -J. Choi,
S. Zoła,
J. Chatelain,
T. A. Lister,
E. Gomez,
S. Greenstreet,
A. Pál,
R. Szakáts,
N. Erasmus,
R. Lees,
P. Janse van Rensburg,
W. Ogłoza,
M. Dróżdż,
M. Żejmo,
K. Kamiński,
M. K. Kamińska,
R. Duffard,
D. -G. Roh,
H. -S. Yim,
T. Kim
, et al. (8 additional authors not shown)
Abstract:
Context. The close approach of the near-Earth asteroid (99942) Apophis to Earth in 2029 will provide a unique opportunity to examine how the physical properties of the asteroid could be changed due to the Earth's gravitational perturbation. As a result, the Republic of Korea is planning a rendezvous mission to Apophis. Aims. Our aim was to use photometric data from the apparitions in 2020-2021 to…
▽ More
Context. The close approach of the near-Earth asteroid (99942) Apophis to Earth in 2029 will provide a unique opportunity to examine how the physical properties of the asteroid could be changed due to the Earth's gravitational perturbation. As a result, the Republic of Korea is planning a rendezvous mission to Apophis. Aims. Our aim was to use photometric data from the apparitions in 2020-2021 to refine the shape model and spin state of Apophis. Methods. Using thirty-six 1 to 2-m class ground-based telescopes and the Transiting Exoplanet Survey Satellite, we performed a photometric observation campaign throughout the 2020-2021 apparition. The convex shape model and spin state were refined using the light-curve inversion method. Results. According to our best-fit model, Apophis is rotating in a short axis mode with rotation and precession periods of 264.178 hours and 27.38547 hours, respectively. The angular momentum vector orientation of Apophis was found as (275$^\circ$, -85$^\circ$) in the ecliptic coordinate system. The ratio of the dynamic moments of inertia of this asteroid was fitted to $I_a:I_b:I_c=0.64:0.97:1$, which corresponds to an elongated prolate ellipsoid. These findings regarding the spin state and shape model could be used to not only design the space mission scenario but also investigate the impact of the Earth's tidal force during close encounters.
△ Less
Submitted 5 April, 2022;
originally announced April 2022.
-
Properties of slowly rotating asteroids from the Convex Inversion Thermophysical Model
Authors:
A. Marciniak,
J. Ďurech,
V. Alí-Lagoa,
W. Ogłoza,
R. Szakáts,
T. G. Müller,
L. Molnár,
A. Pál,
F. Monteiro,
P. Arcoverde,
R. Behrend,
Z. Benkhaldoun,
L. Bernasconi,
J. Bosch,
S. Brincat,
L. Brunetto,
M. Butkiewicz - Bąk,
F. Del Freo,
R. Duffard,
M. Evangelista-Santana,
G. Farroni,
S. Fauvaud,
M. Fauvaud,
M. Ferrais,
S. Geier
, et al. (51 additional authors not shown)
Abstract:
Results from the TESS mission showed that previous studies strngly underestimated the number of slow rotators, revealing the importance of studying those asteroids. For most slowly rotating asteroids (P > 12), no spin and shape model is available because of observation selection effects. This hampers determination of their thermal parameters and accurate sizes.
We continue our campaign in minimi…
▽ More
Results from the TESS mission showed that previous studies strngly underestimated the number of slow rotators, revealing the importance of studying those asteroids. For most slowly rotating asteroids (P > 12), no spin and shape model is available because of observation selection effects. This hampers determination of their thermal parameters and accurate sizes.
We continue our campaign in minimising selection effects among main belt asteroids. Our targets are slow rotators with low light-curve amplitudes. The goal is to provide their scaled spin and shape models together with thermal inertia, albedo, and surface roughness to complete the statistics. Rich multi-apparition datasets of dense light curves are supplemented with data from Kepler and TESS. In addition to data in the visible range, we also use thermal data from infrared space observatories (IRAS, Akari and WISE) in a combined optimisation process using the Convex Inversion Thermophysical Model (CITPM). This novel method has so far been applied to only a few targets, and in this work we further validate the method.
We present the models of 16 slow rotators. All provide good fits to both thermal and visible data. The obtained sizes are on average accurate at the 5% precision, with diameters in the range from 25 to 145 km. The rotation periods of our targets range from 11 to 59 hours, and the thermal inertia covers a wide range of values, from 2 to <400 SI units, not showing any correlation with the period. With this work we increase the sample of slow rotators with reliable spin and shape models and known thermal inertia by 40%. The thermal inertia values of our sample do not display a previously suggested increasing trend with rotation period, which might be due to their small skin depth.
△ Less
Submitted 1 September, 2021;
originally announced September 2021.
-
(216) Kleopatra, a low density critically rotating M-type asteroid
Authors:
F. Marchis,
L. Jorda,
P. Vernazza,
M. Brož,
J. Hanuš,
M. Ferrais,
F. Vachier,
N. Rambaux,
M. Marsset,
M. Viikinkoski,
E. Jehin,
S. Benseguane,
E. Podlewska-Gaca,
B. Carry,
A. Drouard,
S. Fauvaud,
M. Birlan,
J. Berthier,
P. Bartczak,
C. Dumas,
G. Dudzinski,
J. Durech,
J. Castillo-Rogez,
F. Cipriani,
F. Colas
, et al. (14 additional authors not shown)
Abstract:
Context. The recent estimates of the 3D shape of the M/Xe-type triple asteroid system (216) Kleopatra indicated a density of 5 g.cm$^{-3}$. Such a high density implies a high metal content and a low porosity which is not easy to reconcile with its peculiar dumbbell shape. Aims. Given the unprecedented angular resolution of the VLT/SPHERE/ZIMPOL camera, we aim to constrain the mass and the shape of…
▽ More
Context. The recent estimates of the 3D shape of the M/Xe-type triple asteroid system (216) Kleopatra indicated a density of 5 g.cm$^{-3}$. Such a high density implies a high metal content and a low porosity which is not easy to reconcile with its peculiar dumbbell shape. Aims. Given the unprecedented angular resolution of the VLT/SPHERE/ZIMPOL camera, we aim to constrain the mass and the shape of Kleopatra with high accuracy, hence its density. Methods. We combined our new VLT/SPHERE observations of Kleopatra recorded in 2017 and 2018 with archival data, as well as lightcurve, occultation, and delay-Doppler images, to derive its 3D shape model using two different algorithms (ADAM, MPCD). Furthermore, an N-body dynamical model allowed us to retrieve the orbital elements of the two moons as explained in the accompanying paper. Results. The shape of Kleopatra is very close to an equilibrium dumbbell figure with two lobes and a thick neck. Its volume equivalent diameter (118.75$\pm$1.40) km and mass (2.97$\pm$0.32) 10$^{18}$ kg imply a bulk density of (3.38$\pm$0.50) g cm$^{-3}$. Such a low density for a supposedly metal-rich body indicates a substantial porosity within the primary. This porous structure along with its near-equilibrium shape is compatible with a formation scenario including a giant impact followed by reaccumulation. Kleopatra's current rotation period and dumbbell shape imply that it is in a critically rotating state. The low effective gravity along the equator of the body, together with the equatorial orbits of the moons and possibly rubble-pile structure, opens the possibility that the moons formed via mass shedding. Conclusions. Kleopatra is a puzzling multiple system due to the unique characteristics of the primary. It deserves particular attention in the future, with the Extremely Large Telescopes and possibly a dedicated space mission.
△ Less
Submitted 16 August, 2021;
originally announced August 2021.
-
An advanced multipole model for (216) Kleopatra triple system
Authors:
M. Brož,
F. Marchis,
L. Jorda,
J. Hanuš,
P. Vernazza,
M. Ferrais,
F. Vachier,
N. Rambaux,
M. Marsset,
M. Viikinkoski,
E. Jehin,
S. Benseguane,
E. Podlewska-Gaca,
B. Carry,
A. Drouard,
S. Fauvaud,
M. Birlan,
J. Berthier,
P. Bartczak,
C. Dumas,
G. Dudziński,
J. Ďurech,
J. Castillo-Rogez,
F. Cipriani,
F. Colas
, et al. (15 additional authors not shown)
Abstract:
To interpret adaptive-optics observations of (216) Kleopatra, we need to describe an evolution of multiple moons, orbiting an extremely irregular body and including their mutual interactions. Such orbits are generally non-Keplerian and orbital elements are not constants. Consequently, we use a modified $N$-body integrator, which was significantly extended to include the multipole expansion of the…
▽ More
To interpret adaptive-optics observations of (216) Kleopatra, we need to describe an evolution of multiple moons, orbiting an extremely irregular body and including their mutual interactions. Such orbits are generally non-Keplerian and orbital elements are not constants. Consequently, we use a modified $N$-body integrator, which was significantly extended to include the multipole expansion of the gravitational field up to the order $\ell = 10$. Its convergence was verified against the `brute-force' algorithm. We computed the coefficients $C_{\ell m},S_{\!\ell m}$ for Kleopatra's shape, assuming a~constant bulk density. For solar-system applications, it was also necessary to implement a variable distance and geometry of observations. Our $χ^2$ metric then accounts for the absolute astrometry, the relative astrometry (2nd moon with respect to 1st), angular velocities, and also silhouettes, constraining the pole orientation. This allowed us to derive the orbital elements of Kleopatra's two moons. Using both archival astrometric data and new VLT/SPHERE observations (ESO LP 199.C-0074), we were able to identify the true periods of the moons, $P_1 = (1.822359\pm0.004156)\,{\rm d}$, $P_2 = (2.745820\pm0.004820)\,{\rm d}$. They orbit very close to the 3:2 mean-motion resonance, but their osculating eccentricities are too small compared to other perturbations (multipole, mutual), so that regular librations of the critical argument are not present. The resulting mass of Kleopatra, $m_1 = (1.49\pm0.16)\cdot10^{-12}\,M_\odot$ or $2.97\cdot10^{18}\,{\rm kg}$, is significantly lower than previously thought. An implication explained in the accompanying paper (Marchis et al.) is that (216) Kleopatra is a critically rotating body.
△ Less
Submitted 19 May, 2021;
originally announced May 2021.
-
Evidence for differentiation of the most primitive small bodies
Authors:
B. Carry,
P. Vernazza,
F. Vachier,
M. Neveu,
J. Berthier J. Hanus,
M. Ferrais,
L. Jorda,
M. Marsset,
M. Viikinkoski,
P. Bartczak,
R. Behrend,
Z. Benkhaldoun,
M. Birlan,
J. Castillo-Rogez,
F. Cipriani,
F. Colas,
A. Drouard,
G. P. Dudzinski,
J. Desmars,
C. Dumas,
J. Durech,
R. Fetick,
T. Fusco,
J. Grice,
E. Jehin
, et al. (18 additional authors not shown)
Abstract:
Dynamical models of Solar System evolution have suggested that P-/D-type volatile-rich asteroids formed in the outer Solar System and may be genetically related to the Jupiter Trojans, the comets and small KBOs. Indeed, their spectral properties resemble that of anhydrous cometary dust. High-angular-resolution images of P-type asteroid (87) Sylvia with VLT/SPHERE were used to reconstruct its 3D sh…
▽ More
Dynamical models of Solar System evolution have suggested that P-/D-type volatile-rich asteroids formed in the outer Solar System and may be genetically related to the Jupiter Trojans, the comets and small KBOs. Indeed, their spectral properties resemble that of anhydrous cometary dust. High-angular-resolution images of P-type asteroid (87) Sylvia with VLT/SPHERE were used to reconstruct its 3D shape, and to study the dynamics of its two satellites. We also model Sylvia's thermal evolution. The shape of Sylvia appears flattened and elongated. We derive a volume-equivalent diameter of 271 +/- 5 km, and a low density of 1378 +/- 45 kg.m-3. The two satellites orbit Sylvia on circular, equatorial orbits. The oblateness of Sylvia should imply a detectable nodal precession which contrasts with the fully-Keplerian dynamics of the satellites. This reveals an inhomogeneous internal structure, suggesting that Sylvia is differentiated. Sylvia's low density and differentiated interior can be explained by partial melting and mass redistribution through water percolation. The outer shell would be composed of material similar to interplanetary dust particles (IDPs) and the core similar to aqueously altered IDPs or carbonaceous chondrite meteorites such as the Tagish Lake meteorite. Numerical simulations of the thermal evolution of Sylvia show that for a body of such size, partial melting was unavoidable due to the decay of long-lived radionuclides. In addition, we show that bodies as small as 130-150 km in diameter should have followed a similar thermal evolution, while smaller objects, such as comets and the KBO Arrokoth, must have remained pristine, in agreement with in situ observations of these bodies. NASA Lucy mission target (617) Patroclus (diameter~140 km) may, however, be differentiated.
△ Less
Submitted 10 March, 2021;
originally announced March 2021.
-
Photodissociation of aliphatic PAH derivatives under relevant astrophysical conditions
Authors:
Alexandre Marciniak,
Christine Joblin,
Giacomo Mulas,
Venkat Rao Mundlapati,
Anthony Bonnamy
Abstract:
The interaction of polycyclic aromatic hydrocarbons (PAHs) with vacuum ultraviolet (VUV) photons triggers the emission of the well-known aromatic infrared bands (AIBs) but other mechanisms such as fragmentation can be involved in this interaction. Fragmentation leads to selection effects that favor specific sizes and structures. We investigate the impact of aliphatic bonds on the VUV photo-stabili…
▽ More
The interaction of polycyclic aromatic hydrocarbons (PAHs) with vacuum ultraviolet (VUV) photons triggers the emission of the well-known aromatic infrared bands (AIBs) but other mechanisms such as fragmentation can be involved in this interaction. Fragmentation leads to selection effects that favor specific sizes and structures. We investigate the impact of aliphatic bonds on the VUV photo-stability of PAH cations under conditions applicable for photodissociation regions (PDRs). Cations of pyrene (C16H10) and coronene (C24H12) derivatives containing aliphatic bonds (methyl or ethyl sidegroups, superhydrogenation) are submitted to VUV (10.5 eV) photons over long timescales (~1000 s) in the cryogenic PIRENEA setup. The fragmentation cascades are analyzed with a simple kinetics model; fragmentation pathways, rates and branching ratios are derived. Aliphatic PAH derivatives are found to have a higher fragmentation rate and carbon loss compared to regular PAHs. The fragmentation of PAHs with alkylated sidegroups forms species with peripheral pentagonal cycles, which can be more stable than the bare PAH cations. This stability is quantified and the most stable species, for which there is an effective competition of the fragmentation with isomerization and radiative cooling are identified. This work supports a scenario in which the evaporation of nanograins with a mixed aliphatic and aromatic composition followed by VUV photoprocessing results in both the production of the carriers of the 3.4um AIB by methyl sidegroups and in an abundant source of small hydrocarbons at the border of PDRs. An additional side effect is the efficient formation of stable PAHs that contain some peripheral pentagonal rings. Our experiments also support the role of isomerization processes in PAH photofragmentation, including the H-migration process, which could lead to an additional contribution to the 3.4um AIB.
△ Less
Submitted 2 July, 2021; v1 submitted 5 March, 2021;
originally announced March 2021.
-
The 2017 May 20$^{\rm th}$ stellar occultation by the elongated centaur (95626) 2002 GZ$_{32}$
Authors:
P. Santos-Sanz,
J. L. Ortiz,
B. Sicardy,
G. Benedetti-Rossi,
N. Morales,
E. Fernández-Valenzuela,
R. Duffard,
R. Iglesias-Marzoa,
J. L. Lamadrid,
N. Maícas,
L. Pérez,
K. Gazeas,
J. C. Guirado,
V. Peris,
F. J. Ballesteros,
F. Organero,
L. Ana-Hernández,
F. Fonseca,
A. Alvarez-Candal,
Y. Jiménez-Teja,
M. Vara-Lubiano,
F. Braga-Ribas,
J. I. B. Camargo,
J. Desmars,
M. Assafin
, et al. (34 additional authors not shown)
Abstract:
We predicted a stellar occultation of the bright star Gaia DR1 4332852996360346368 (UCAC4 385-75921) (m$_{\rm V}$= 14.0 mag) by the centaur 2002 GZ$_{32}$ for 2017 May 20$^{\rm th}$. Our latest shadow path prediction was favourable to a large region in Europe. Observations were arranged in a broad region inside the nominal shadow path. Series of images were obtained with 29 telescopes throughout E…
▽ More
We predicted a stellar occultation of the bright star Gaia DR1 4332852996360346368 (UCAC4 385-75921) (m$_{\rm V}$= 14.0 mag) by the centaur 2002 GZ$_{32}$ for 2017 May 20$^{\rm th}$. Our latest shadow path prediction was favourable to a large region in Europe. Observations were arranged in a broad region inside the nominal shadow path. Series of images were obtained with 29 telescopes throughout Europe and from six of them (five in Spain and one in Greece) we detected the occultation. This is the fourth centaur, besides Chariklo, Chiron and Bienor, for which a multi-chord stellar occultation is reported. By means of an elliptical fit to the occultation chords we obtained the limb of 2002 GZ$_{32}$ during the occultation, resulting in an ellipse with axes of 305 $\pm$ 17 km $\times$ 146 $\pm$ 8 km. From this limb, thanks to a rotational light curve obtained shortly after the occultation, we derived the geometric albedo of 2002 GZ$_{32}$ ($p_{\rm V}$ = 0.043 $\pm$ 0.007) and a 3-D ellipsoidal shape with axes 366 km $\times$ 306 km $\times$ 120 km. This shape is not fully consistent with a homogeneous body in hydrostatic equilibrium for the known rotation period of 2002 GZ$_{32}$. The size (albedo) obtained from the occultation is respectively smaller (greater) than that derived from the radiometric technique but compatible within error bars. No rings or debris around 2002 GZ$_{32}$ were detected from the occultation, but narrow and thin rings cannot be discarded.
△ Less
Submitted 11 December, 2020;
originally announced December 2020.
-
Stellar occultations enable milliarcsecond astrometry for Trans-Neptunian objects and Centaurs
Authors:
F. L. Rommel,
F. Braga-Ribas,
J. Desmars,
J. I. B. Camargo,
J. L. Ortiz,
B. Sicardy,
R. Vieira-Martins,
M. Assafin,
P. Santos-Sanz,
R. Duffard,
E. Fernández-Valenzuela,
J. Lecacheux,
B. E. Morgado,
G. Benedetti-Rossi,
A. R. Gomes-Júnior,
C. L. Pereira,
D. Herald,
W. Hanna,
J. Bradshaw,
N. Morales,
J. Brimacombe,
A. Burtovoi,
T. Carruthers,
J. R. de Barros,
M. Fiori
, et al. (44 additional authors not shown)
Abstract:
Trans-Neptunian objects (TNOs) and Centaurs are remnants of our planetary system formation, and their physical properties have invaluable information for evolutionary theories. Stellar occultation is a ground-based method for studying these small bodies and has presented exciting results. These observations can provide precise profiles of the involved body, allowing an accurate determination of it…
▽ More
Trans-Neptunian objects (TNOs) and Centaurs are remnants of our planetary system formation, and their physical properties have invaluable information for evolutionary theories. Stellar occultation is a ground-based method for studying these small bodies and has presented exciting results. These observations can provide precise profiles of the involved body, allowing an accurate determination of its size and shape. The goal is to show that even single-chord detections of TNOs allow us to measure their milliarcsecond astrometric positions in the reference frame of the Gaia second data release (DR2). Accurated ephemerides can then be generated, allowing predictions of stellar occultations with much higher reliability. We analyzed data from stellar occultations to obtain astrometric positions of the involved bodies. The events published before the Gaia era were updated so that the Gaia DR2 catalog is the reference. Previously determined sizes were used to calculate the position of the object center and its corresponding error with respect to the detected chord and the International Celestial Reference System (ICRS) propagated Gaia DR2 star position. We derive 37 precise astrometric positions for 19 TNOs and 4 Centaurs. Twenty-one of these events are presented here for the first time. Although about 68\% of our results are based on single-chord detection, most have intrinsic precision at the submilliarcsecond level. Lower limits on the diameter and shape constraints for a few bodies are also presented as valuable byproducts. Using the Gaia DR2 catalog, we show that even a single detection of a stellar occultation allows improving the object ephemeris significantly, which in turn enables predicting a future stellar occultation with high accuracy. Observational campaigns can be efficiently organized with this help, and may provide a full physical characterization of the involved object.
△ Less
Submitted 23 October, 2020;
originally announced October 2020.
-
Binary asteroid (31) Euphrosyne: Ice-rich and nearly spherical
Authors:
B. Yang,
J. Hanus,
B. Carry,
P. Vernazza,
M. Broz,
F. Vachier,
N. Rambaux,
M. Marsset,
O. Chrenko,
P. Sevecek,
M. Viikinkoski,
E. Jehin,
M. Ferrais,
E. Podlewska Gaca,
A. Drouard,
F. Marchis,
M. Birlan,
Z. Benkhaldoun,
J. Berthier,
P. Bartczak,
C. Dumas,
G. Dudzinski,
J. Durech,
J. Castillo-Rogez,
F. Cipriani
, et al. (16 additional authors not shown)
Abstract:
Asteroid (31) Euphrosyne is one of the biggest objects in the asteroid main belt and the Euphrosyne family occupies a highly inclined region in the outer main belt and contains a remarkably large number of members, which is interpreted as an outcome of a disruptive cratering event. The goals of this adaptive-optics imaging study were threefold: to characterize the shape of Euphrosyne, to constrain…
▽ More
Asteroid (31) Euphrosyne is one of the biggest objects in the asteroid main belt and the Euphrosyne family occupies a highly inclined region in the outer main belt and contains a remarkably large number of members, which is interpreted as an outcome of a disruptive cratering event. The goals of this adaptive-optics imaging study were threefold: to characterize the shape of Euphrosyne, to constrain its density, and to search for the large craters that may be associated with the family formation event. We obtained disk-resolved images of Euphrosyne using SPHERE/ZIMPOL at ESO's 8.2-m VLT as part of our large program (ID: 199.C-0074, PI: Vernazza). We reconstructed its 3D-shape using the adam shape modeling algorithm based on the SPHERE images and the available lightcurves of this asteroid. We analyzed the dynamics of the satellite with the genoid meta-heuristic algorithm. Finally, we studied the shape of Euphrosyne using hydrostatic equilibrium models. Our SPHERE observations show that Euphrosyne has a nearly spherical shape with the sphericity index of 0.9888 and its surface lacks large impact craters. Euphrosyne's diameter is 268+/-6 km, making it one of the top 10 largest main belt asteroids. We detected a satellite of Euphrosyne -- S/2019 (31) 1-- that is about 4 km across, on an circular orbit. The mass determined from the orbit of the satellite together with the volume computed from the shape model imply a density of 1665+/-242 kg/m^3, suggesting that Euphrosyne probably contain a large fraction of water ice in its interior. We find that the spherical shape of Euphrosyne is a result of the reaccumulation process following the impact, as in the case of (10) Hygiea. However, our shape analysis reveals that, contrary to Hygiea, the axis ratios of Euphrosyne significantly differ from the ones suggested by fluid hydrostatic equilibrium following reaccumulation.
△ Less
Submitted 15 July, 2020;
originally announced July 2020.
-
The size, shape, density and ring of the dwarf planet Haumea from a stellar occultation
Authors:
J. L. Ortiz,
P. Santos-Sanz,
B. Sicardy,
G. Benedetti-Rossi,
D. Bérard,
N. Morales,
R. Duffard,
F. Braga-Ribas,
U. Hopp,
C. Ries,
V. Nascimbeni,
F. Marzari,
V. Granata,
A. Pál,
C. Kiss,
T. Pribulla,
R. Komžík,
K. Hornoch,
P. Pravec,
P. Bacci,
M. Maestripieri,
L. Nerli,
L. Mazzei,
M. Bachini,
F. Martinelli
, et al. (68 additional authors not shown)
Abstract:
Among the four known transneptunian dwarf planets, Haumea is an exotic, very elongated, and fast rotating body. In contrast to the other dwarf planets, its size, shape, albedo, and density are not well constrained. Here we report results of a multi-chord stellar occultation, observed on 2017 January 21. Secondary events observed around the main body are consistent with the presence of a ring of op…
▽ More
Among the four known transneptunian dwarf planets, Haumea is an exotic, very elongated, and fast rotating body. In contrast to the other dwarf planets, its size, shape, albedo, and density are not well constrained. Here we report results of a multi-chord stellar occultation, observed on 2017 January 21. Secondary events observed around the main body are consistent with the presence of a ring of opacity 0.5, width 70 km, and radius 2,287$_{-45}^{+75}$ km. The Centaur Chariklo was the first body other than a giant planet to show a ring system and the Centaur Chiron was later found to possess something similar to Chariklo's rings. Haumea is the first body outside the Centaur population with a ring. The ring is coplanar with both Haumea's equator and the orbit of its satellite Hi'iaka. Its radius places close to the 3:1 mean motion resonance with Haumea's spin period. The occultation by the main body provides an instantaneous elliptical limb with axes 1,704 $\pm$ 4 km x 1,138 $\pm$ 26 km. Combined with rotational light-curves, it constrains Haumea's 3D orientation and its triaxial shape, which is inconsistent with a homogeneous body in hydrostatic equilibrium. Haumea's largest axis is at least 2,322 $\pm$ 60 km, larger than thought before. This implies an upper limit of 1,885 $\pm$ 80 kg m$^{-3}$ for Haumea's density, smaller and less puzzling than previous estimations, and a geometric albedo of 0.51 $\pm$ 0.02, also smaller than previous estimations. No global N$_2$ or CH$_4$ atmosphere with pressures larger than 15 and 50 nbar (3-$σ$ limits), respectively, is detected.
△ Less
Submitted 4 June, 2020;
originally announced June 2020.
-
The large Trans-Neptunian Object 2002 TC$_{302}$ from combined stellar occultation, photometry and astrometry data
Authors:
J. L. Ortiz,
P. Santos-Sanz,
B. Sicardy,
G. Benedetti-Rossi,
R. Duffard,
N. Morales,
F. Braga-Ribas,
E. Fernández-Valenzuela,
V. Nascimbeni,
D. Nardiello,
A. Carbognani,
L. Buzzi,
A. Aletti,
P. Bacci,
M. Maestripieri,
L. Mazzei,
H. Mikuz,
J. Skvarc,
F. Ciabattari,
F. Lavalade,
G. Scarfi,
J. M. Mari,
M. Conjat,
S. Sposetti,
M. Bachini
, et al. (56 additional authors not shown)
Abstract:
On 28th January 2018, the large Trans-Neptunian Object (TNO) 2002TC302 occulted a m$_v= $15.3 star with ID 130957813463146112 in the Gaia DR2 stellar catalog. 12 positive occultation chords were obtained from Italy, France, Slovenia and Switzerland. Also, 4 negative detections were obtained near the north and south limbs. This represents the best observed stellar occultation by a TNO other than Pl…
▽ More
On 28th January 2018, the large Trans-Neptunian Object (TNO) 2002TC302 occulted a m$_v= $15.3 star with ID 130957813463146112 in the Gaia DR2 stellar catalog. 12 positive occultation chords were obtained from Italy, France, Slovenia and Switzerland. Also, 4 negative detections were obtained near the north and south limbs. This represents the best observed stellar occultation by a TNO other than Pluto, in terms of the number of chords published thus far. From the 12 chords, an accurate elliptical fit to the instantaneous projection of the body, compatible with the near misses, can be obtained. The resulting ellipse has major and minor axes of 543 $\pm$ 18 km and 460 $\pm$ 11 km, respectively, with a position angle of 3 $\pm$ 1 degrees for the minor axis. This information, combined with rotational light curves obtained with the 1.5m telescope at Sierra Nevada Observatory and the 1.23m telescope at Calar Alto observatory, allows us to derive possible 3D shapes and density estimations for the body, based on hydrostatic equilibrium assumptions. The effective area equivalent diameter is $\sim$ 84 km smaller than the radiometrically derived diameter using thermal data from Herschel and Spitzer Space Telescopes. This might indicate the existence of an unresolved satellite of up to $\sim$ 300 km in diameter, to account for all the thermal flux, although the occultation and thermal diameters are compatible within their error bars given the considerable uncertainty of the thermal results. The existence of a potential satellite also appears to be consistent with other ground-based data presented here. From the effective occultation diameter combined with H$_V$ measurements we derive a geometric albedo of 0.147 $\pm$ 0.005, which would be somewhat smaller if 2002TC302 has a satellite. The best occultation light curves do not show any signs of ring features or any signatures of a global atmosphere.
△ Less
Submitted 18 May, 2020;
originally announced May 2020.
-
Thermal properties of large main-belt asteroids observed by Herschel PACS
Authors:
V. Alí-Lagoa,
T. G. Müller,
C. Kiss,
R. Szakáts,
G. Marton,
A. Farkas-Takács,
P. Bartczak,
M. Butkiewicz-Bąk,
G. Dudziński,
A. Marciniak,
E. Podlewska-Gaca,
R. Duffard,
P. Santos-Sanz,
J. L. Ortiz
Abstract:
Non-resolved thermal infrared observations enable studies of thermal and physical properties of asteroid surfaces provided the shape and rotational properties of the target are well determined via thermo-physical models. We used calibration-programme Herschel PACS data (70, 100, 160 $μ$m) and state-of-the-art shape models derived from adaptive-optics observations and/or optical light curves to con…
▽ More
Non-resolved thermal infrared observations enable studies of thermal and physical properties of asteroid surfaces provided the shape and rotational properties of the target are well determined via thermo-physical models. We used calibration-programme Herschel PACS data (70, 100, 160 $μ$m) and state-of-the-art shape models derived from adaptive-optics observations and/or optical light curves to constrain for the first time the thermal inertia of twelve large main-belt asteroids. We also modelled previously well-characterised targets such as (1) Ceres or (4) Vesta as they constitute important benchmarks. Using the scale as a free parameter, most targets required a re-scaling $\sim$5\% consistent with what would be expected given the absolute calibration error bars. This constitutes a good cross-validation of the scaled shape models, although some targets required larger re-scaling to reproduce the IR data. We obtained low thermal inertias typical of large main belt asteroids studied before, which continues to give support to the notion that these surfaces are covered by fine-grained insulating regolith. Although the wavelengths at which PACS observed are longwards of the emission peak for main-belt asteroids, they proved to be extremely valuable to constrain size and thermal inertia and not too sensitive to surface roughness. Finally, we also propose a graphical approach to help examine how different values of the exponent used for scaling the thermal inertia as a function of heliocentric distance (i.e. temperature) affect our interpretation of the results.
△ Less
Submitted 4 May, 2020;
originally announced May 2020.
-
Shape model and spin state of non-principal axis rotator (5247) Krylov
Authors:
H. -J. Lee,
J. Ďurech,
M. -J. Kim,
H. -K. Moon,
C. -H. Kim,
Y. -J. Choi,
A. Galád,
D. Pray,
A. Marciniak,
M. Kaplan,
O. Erece,
R. Duffard,
Š. Gajdoš,
J. Világi,
M. Lehký
Abstract:
Context. The study of non-principal axis (NPA) rotators can provide important clues to the evolution of the spin state of asteroids. However, so far, very few studies have focused on NPA-rotating main-belt asteroids (MBAs). One of MBAs that are known to be in an excited rotation state is asteroid (5247) Krylov. Aims. By using disk-integrated photometric data, we construct a physical model of (5247…
▽ More
Context. The study of non-principal axis (NPA) rotators can provide important clues to the evolution of the spin state of asteroids. However, so far, very few studies have focused on NPA-rotating main-belt asteroids (MBAs). One of MBAs that are known to be in an excited rotation state is asteroid (5247) Krylov. Aims. By using disk-integrated photometric data, we construct a physical model of (5247) Krylov including shape and spin state. Methods. We apply the light curve convex inversion method employing optical light curves obtained by using ground-based telescopes in three apparitions during 2006, 2016, and 2017, along with infrared light curves obtained by the Wide-field Infrared Survey Explorer (WISE) satellite in 2010. Results. Asteroid (5247)~Krylov is spinning in a short axis mode (SAM) characterized by rotation and precession periods of 368.7 hr and 67.27 hr, respectively. The angular momentum vector orientation of Krylov is found to be $λ_{L} = 298^\circ$ and $β_{L} = -58^\circ$. The ratio of the rotational kinetic energy to the basic spin state energy $E/E_{0} \simeq 1.02$ shows that the (5247) Krylov is about 2% excited state compared to the Principal Axis (PA) rotation state. The shape of (5247) Krylov can be approximated by an elongated prolate ellipsoid with a ratio of moments of inertia of $I_{a}:I_{b}:I_{c}=0.36:0.96:1$. This is the first physical model of NPA rotator among MBAs. The physical processes that led to the current NPA rotation cannot be unambiguously reconstructed.
△ Less
Submitted 26 March, 2020; v1 submitted 27 February, 2020;
originally announced February 2020.
-
Light curves of ten Centaurs from K2 measurements
Authors:
G. Marton,
Cs. Kiss,
L. Molnár,
A. Pál,
A. Farkas-Takács,
Gy. M. Szabó,
T. Müller,
V. Alí-Lagoa,
R. Szabó,
J. Vinkó,
K. Sárneczky,
Cs. E. Kalup,
A. Marciniak,
R. Duffard,
L. L. Kiss
Abstract:
Here we present the results of visible range light curve observations of ten Centaurs using the Kepler Space Telescope in the framework of the K2 mission. Well defined periodic light curves are obtained in six cases allowing us to derive rotational periods, a notable increase in the number of Centaurs with known rotational properties. The low amplitude light curves of (471931) 2013 PH44 and (25011…
▽ More
Here we present the results of visible range light curve observations of ten Centaurs using the Kepler Space Telescope in the framework of the K2 mission. Well defined periodic light curves are obtained in six cases allowing us to derive rotational periods, a notable increase in the number of Centaurs with known rotational properties. The low amplitude light curves of (471931) 2013 PH44 and (250112) 2002 KY14 can be explained either by albedo variegations, binarity or elongated shape. (353222) 2009 YD7 and (514312) 2016 AE193 could be rotating elongated objects, while 2017 CX33 and 2012 VU85 are the most promising binary candidates due to their slow rotations and higher light curve amplitudes. (463368) 2012 VU85 has the longest rotation period, P=56.2h observed among Centaurs. The P>20h rotation periods obtained for the two potential binaries underlines the importance of long, uninterrupted time series photometry of solar system targets that can suitably be performed only from spacecraft, like the Kepler in the K2 mission, and the currently running TESS mission.
△ Less
Submitted 26 February, 2020;
originally announced February 2020.
-
Physical parameters of selected Gaia mass asteroids
Authors:
E. Podlewska-Gaca,
A. Marciniak,
V. Alí-Lagoa,
P. Bartczak,
T. G. Müller,
R. Szakáts,
R. Duffard,
L. Molnár,
A. Pál,
M. Butkiewicz-Bąk,
G. Dudziński,
K. Dziadura,
P. Antonini,
V. Asenjo,
M. Audejean,
Z. Benkhaldoun,
R. Behrend,
L. Bernasconi,
J. M. Bosch,
A. Chapman,
B. Dintinjana,
A. Farkas,
M. Ferrais,
S. Geier,
J. Grice
, et al. (14 additional authors not shown)
Abstract:
Thanks to the Gaia mission, it will be possible to determine the masses of approximately hundreds of large main belt asteroids with very good precision. We currently have diameter estimates for all of them that can be used to compute their volume and hence their density. However, some of those diameters are still based on simple thermal models, which can occasionally lead to volume uncertainties a…
▽ More
Thanks to the Gaia mission, it will be possible to determine the masses of approximately hundreds of large main belt asteroids with very good precision. We currently have diameter estimates for all of them that can be used to compute their volume and hence their density. However, some of those diameters are still based on simple thermal models, which can occasionally lead to volume uncertainties as high as 20-30%. The aim of this paper is to determine the 3D shape models and compute the volumes for 13 main belt asteroids that were selected from those targets for which Gaia will provide the mass with an accuracy of better than 10%. We used the genetic Shaping Asteroids with Genetic Evolution (SAGE) algorithm to fit disk-integrated, dense photometric lightcurves and obtain detailed asteroid shape models. These models were scaled by fitting them to available stellar occultation and/or thermal infrared observations. We determine the spin and shape models for 13 main belt asteroids using the SAGE algorithm. Occultation fitting enables us to confirm main shape features and the spin state, while thermophysical modeling leads to more precise diameters as well as estimates of thermal inertia values. We calculated the volume of our sample of main-belt asteroids for which the Gaia satellite will provide precise mass determinations. From our volumes, it will then be possible to more accurately compute the bulk density, which is a fundamental physical property needed to understand the formation and evolution processes of small solar system bodies.
△ Less
Submitted 20 January, 2020;
originally announced January 2020.
-
(704) Interamnia: A transitional object between a dwarf planet and a typical irregular-shaped minor body
Authors:
J. Hanuš,
P. Vernazza,
M. Viikinkoski,
M. Ferrais,
N. Rambaux,
E. Podlewska-Gaca,
A. Drouard,
L. Jorda,
E. Jehin,
B. Carry,
M. Marsset,
F. Marchis,
B. Warner,
R. Behrend,
V. Asenjo,
N. Berger,
M. Bronikowska,
T. Brothers,
S. Charbonnel,
C. Colazo,
J-F. Coliac,
R. Duffard,
A. Jones,
A. Leroy,
A. Marciniak
, et al. (34 additional authors not shown)
Abstract:
With an estimated diameter in the 320 to 350 km range, (704) Interamnia is the fifth largest main belt asteroid and one of the few bodies that fills the gap in size between the four largest bodies with $D$ > 400 km (Ceres, Vesta, Pallas and Hygiea) and the numerous smaller bodies with $D$ $\lesssim$ 200 km. However, despite its large size, little is known about the shape and spin state of Interamn…
▽ More
With an estimated diameter in the 320 to 350 km range, (704) Interamnia is the fifth largest main belt asteroid and one of the few bodies that fills the gap in size between the four largest bodies with $D$ > 400 km (Ceres, Vesta, Pallas and Hygiea) and the numerous smaller bodies with $D$ $\lesssim$ 200 km. However, despite its large size, little is known about the shape and spin state of Interamnia and, therefore, about its bulk composition and past collisional evolution. We aimed to test at what size and mass the shape of a small body departs from a nearly ellipsoidal equilibrium shape (as observed in the case of the four largest asteroids) to an irregular shape as routinely observed in the case of smaller ($D$ $\lesssim$ 200 km) bodies. We observed Interamnia as part of our ESO VLT/SPHERE large program (ID: 199.C-0074) at thirteen different epochs. In addition, several new optical lightcurves were recorded. These data, along with stellar occultation data from the literature, were fed to the All-Data Asteroid Modeling (ADAM) algorithm to reconstruct the 3D-shape model of Interamnia and to determine its spin state. Interamnia's volume-equivalent diameter of 332 $\pm$ 6 km implies a bulk density of $ρ$=1.98 $\pm$ 0.68 gcm$^{-3}$ , which suggests that Interamnia - like Ceres and Hygiea - contains a high fraction of water ice, consistent with the paucity of apparent craters. Our observations reveal a shape that can be well approximated by an ellipsoid, and that is compatible with a fluid hydrostatic equilibrium at the 2 $σ$ level. The rather regular shape of Interamnia implies that the size and mass limit, under which the shapes of minor bodies with a high amount of water ice in the subsurface become irregular, has to be searched among smaller ($D$ $\lesssim$ 300km) less massive ($m$ $\lesssim$ 3x10$^{19}$ kg) bodies.
△ Less
Submitted 18 December, 2019; v1 submitted 29 November, 2019;
originally announced November 2019.
-
A new non-convex model of the binary asteroid (809) Lundia obtained with the SAGE modelling technique
Authors:
P. Bartczak,
A. Kryszczyńska,
G. Dudziński,
M. Polińska,
F. Colas,
F. Vachier,
A. Marciniak,
J. Pollock,
G. Apostolovska,
T. Santana-Ros,
R. Hirsch,
W. Dimitrow,
M. Murawiecka,
P. Wietrzycka,
J. Nadolny
Abstract:
We present a new non-convex model of the binary asteroid (809) Lundia. A SAGE (Shaping Asteroids with Genetic Evolution) method using disc-integrated photometry only was used for deriving physical parameters of this binary system. The model of (809) Lundia improves former system's pole solution and gives the ecliptic coordinates of the orbit pole - $λ=122^{\circ}$, $β=22^{\circ}$,…
▽ More
We present a new non-convex model of the binary asteroid (809) Lundia. A SAGE (Shaping Asteroids with Genetic Evolution) method using disc-integrated photometry only was used for deriving physical parameters of this binary system. The model of (809) Lundia improves former system's pole solution and gives the ecliptic coordinates of the orbit pole - $λ=122^{\circ}$, $β=22^{\circ}$, $σ=\pm5^{\circ}$ - and the orbital period of $15.41574 \pm 0.00001$ h. For scaling our results we used effective diameter of $D_{eff} = 9.6 \pm 1.1$ km obtained from Spitzer observations. The non-convex shape description of the components permitted a refined calculation of the components' volumes, leading to a density estimation of $2.5\pm0.2$ g/cm$^3$ and macroporosity of 13-23\%. The intermediate-scale features of the model may also offer new clues on the components' origin and evolution.
△ Less
Submitted 20 May, 2019;
originally announced May 2019.
-
Thermal properties of slowly rotating asteroids: Results from a targeted survey
Authors:
A. Marciniak,
V. Alí-Lagoa,
T. G. Müller,
R. Szakáts,
L. Molnár,
A. Pál,
E. Podlewska - Gaca,
N. Parley,
P. Antonini,
E. Barbotin,
R. Behrend,
L. Bernasconi,
M. Butkiewicz - Bąk,
R. Crippa,
R. Duffard,
R. Ditteon,
M. Feuerbach,
S. Fauvaud,
J. Garlitz,
S. Geier,
R. Goncalves,
J. Grice,
I. Grześkowiak,
R. Hirsch,
J. Horbowicz
, et al. (29 additional authors not shown)
Abstract:
Context. Earlier work suggests that slowly rotating asteroids should have higher thermal inertias than faster rotators because the heat wave penetrates deeper into the sub-surface. However, thermal inertias have been determined mainly for fast rotators due to selection effects in the available photometry used to obtain shape models required for thermophysical modelling (TPM).
Aims. Our aims are…
▽ More
Context. Earlier work suggests that slowly rotating asteroids should have higher thermal inertias than faster rotators because the heat wave penetrates deeper into the sub-surface. However, thermal inertias have been determined mainly for fast rotators due to selection effects in the available photometry used to obtain shape models required for thermophysical modelling (TPM).
Aims. Our aims are to mitigate these selection effects by producing shape models of slow rotators, to scale them and compute their thermal inertia with TPM, and to verify whether thermal inertia increases with the rotation period.
Methods. To decrease the bias against slow rotators, we conducted a photometric observing campaign of main-belt asteroids with periods longer than 12 hours, from multiple stations worldwide, adding in some cases data from WISE and Kepler space telescopes. For spin and shape reconstruction we used the lightcurve inversion method, and to derive thermal inertias we applied a thermophysical model to fit available infrared data from IRAS, AKARI, and WISE.
Results. We present new models of 11 slow rotators that provide a good fit to the thermal data. In two cases, the TPM analysis showed a clear preference for one of the two possible mirror solutions. We derived the diameters and albedos of our targets in addition to their thermal inertias, which ranged between 3$^{+33}_{-3}$ and 45$^{+60}_{-30}$ Jm$^{-2}$s$^{-1/2}$K$^{-1}$.
Conclusions. Together with our previous work, we have analysed 16 slow rotators from our dense survey with sizes between 30 and 150 km. The current sample thermal inertias vary widely, which does not confirm the earlier suggestion that slower rotators have higher thermal inertias.
△ Less
Submitted 15 May, 2019;
originally announced May 2019.
-
The shape of (7) Iris as evidence of an ancient large impact?
Authors:
J. Hanuš,
M. Marsset,
P. Vernazza,
M. Viikinkoski,
A. Drouard,
M. Brož,
B. Carry,
R. Fetick,
F. Marchis,
L. Jorda,
T. Fusco,
M. Birlan,
T. Santana-Ros,
E. Podlewska-Gaca,
E. Jehin,
M. Ferrais,
J. Grice,
P. Bartczak,
J. Berthier,
J. Castillo-Rogez,
F. Cipriani,
F. Colas,
G. Dudzinski,
C. Dumas,
J. Ďurech
, et al. (13 additional authors not shown)
Abstract:
Asteroid (7) Iris is an ideal target for disk-resolved imaging owing to its brightness (V$\sim$7-8) and large angular size of 0.33 arcsec during its apparitions. Iris is believed to belong to the category of large unfragmented asteroids that avoided internal differentiation, implying that its current shape and topography may record the first few 100 Myr of the solar system's collisional evolution.…
▽ More
Asteroid (7) Iris is an ideal target for disk-resolved imaging owing to its brightness (V$\sim$7-8) and large angular size of 0.33 arcsec during its apparitions. Iris is believed to belong to the category of large unfragmented asteroids that avoided internal differentiation, implying that its current shape and topography may record the first few 100 Myr of the solar system's collisional evolution. We recovered information about the shape and surface topography of Iris from disk-resolved VLT/SPHERE/ZIMPOL images acquired in the frame of our ESO large program. We used the All-Data Asteroid Modeling (ADAM) shape reconstruction algorithm to model the 3D shape of Iris, using optical disk-integrated data and disk-resolved images from SPHERE as inputs. We analyzed the SPHERE images to infer the asteroid's global shape and the morphology of its main craters. We present the volume-equivalent diameter D$_{\rm eq}$=214$\pm$5 km, and bulk density $ρ$=2.7$\pm$0.3 g cm$^{-3}$ of Iris. Its shape appears to be consistent with that of an oblate spheroid with a large equatorial excavation. We identified eight putative surface features 20--40 km in diameter detected at several epochs, which we interpret as impact craters. Craters on Iris have depth-to-diameter ratios that are similar to those of analogous 10 km craters on Vesta. The bulk density of Iris is consistent with that of its meteoritic analog, namely LL ordinary chondrites. Considering the absence of a collisional family related to Iris and the number of large craters on its surface, we suggest that its equatorial depression may be the remnant of an ancient (at least 3 Gyr) impact. Iris's shape further opens the possibility that large planetesimals formed as almost perfect oblate spheroids. Finally, we attribute the difference in crater morphology between Iris and Vesta to their different surface gravities.
△ Less
Submitted 25 February, 2019;
originally announced February 2019.
-
Closing the gap between Earth-based and interplanetary mission observations: Vesta seen by VLT/SPHERE
Authors:
R. JL. Fétick,
L. Jorda,
P. Vernazza,
M. Marsset,
A. Drouard,
T. Fusco,
B. Carry,
F. Marchis,
J. Hanuš,
M. Viikinkoski,
M. Birlan,
P. Bartczak,
J. Berthier,
J. Castillo-Rogez,
F. Cipriani,
F. Colas,
G. Dudziński,
C. Dumas,
M. Ferrais,
E. Jehin,
M. Kaasalainen,
A. Kryszczynska,
P. Lamy,
H. Le Coroller,
A. Marciniak
, et al. (12 additional authors not shown)
Abstract:
Context. Over the past decades, several interplanetary missions have studied small bodies in situ, leading to major advances in our understanding of their geological and geophysical properties. These missions, however, have had a limited number of targets. Among them, the NASA Dawn mission has characterised in detail the topography and albedo variegation across the surface of asteroid (4) Vesta do…
▽ More
Context. Over the past decades, several interplanetary missions have studied small bodies in situ, leading to major advances in our understanding of their geological and geophysical properties. These missions, however, have had a limited number of targets. Among them, the NASA Dawn mission has characterised in detail the topography and albedo variegation across the surface of asteroid (4) Vesta down to a spatial resolution of approximately 20 m/pixel scale.
Aims. Here our aim was to determine how much topographic and albedo information can be retrieved from the ground with VLT/SPHERE in the case of Vesta, having a former space mission (Dawn) providing us with the ground truth that can be used as a benchmark.
Methods. We observed Vesta with VLT/SPHERE/ZIMPOL as part of our ESO large programme (ID 199.C-0074) at six different epochs, and deconvolved the collected images with a parametric point spread function (PSF). We then compared our images with synthetic views of Vesta generated from the 3D shape model of the Dawn mission, on which we projected Vesta's albedo information.
Results. We show that the deconvolution of the VLT/SPHERE images with a parametric PSF allows the retrieval of the main topographic and albedo features present across the surface of Vesta down to a spatial resolution of approximately 20-30 km. Contour extraction shows an accuracy of approximately 1 pixel (3.6 mas). The present study provides the very first quantitative estimate of the accuracy of ground-based adaptive-optics imaging observations of asteroid surfaces.
Conclusions. In the case of Vesta, the upcoming generation of 30-40m telescopes (ELT, TMT, GMT) should in principle be able to resolve all of the main features present across its surface, including the troughs and the north-south crater dichotomy, provided that they operate at the diffraction limit.
△ Less
Submitted 4 February, 2019;
originally announced February 2019.
-
The homogeneous internal structure of CM-like asteroid (41) Daphne
Authors:
B. Carry,
F. Vachier,
J. Berthier,
M. Marsset,
P. Vernazza,
J. Grice,
W. J. Merline,
E. Lagadec,
A. Fienga,
A. Conrad,
E. Podlewska-Gaca,
T. Santana-Ros,
M. Viikinkoski,
J. Hanuš,
C. Dumas,
J. D. Drummond,
P. M. Tamblyn,
C. R. Chapman,
R. Behrend,
L. Bernasconi,
P. Bartczak,
Z. Benkhaldoun,
M. Birlan,
J. Castillo-Rogez,
F. Cipriani
, et al. (26 additional authors not shown)
Abstract:
Context. CM-like asteroids (Ch and Cgh classes) are a major population within the broader C-complex, encompassing about 10% of the mass of the main asteroid belt. Their internal structure has been predicted to be homogeneous, based on their compositional similarity as inferred from spectroscopy (Vernazza et al., 2016, AJ 152, 154) and numerical modeling of their early thermal evolution (Bland & Tr…
▽ More
Context. CM-like asteroids (Ch and Cgh classes) are a major population within the broader C-complex, encompassing about 10% of the mass of the main asteroid belt. Their internal structure has been predicted to be homogeneous, based on their compositional similarity as inferred from spectroscopy (Vernazza et al., 2016, AJ 152, 154) and numerical modeling of their early thermal evolution (Bland & Travis, 2017, Sci. Adv. 3, e1602514). Aims. Here we aim to test this hypothesis by deriving the density of the CM-like asteroid (41) Daphne from detailed modeling of its shape and the orbit of its small satellite. Methods. We observed Daphne and its satellite within our imaging survey with the Very Large Telescope extreme adaptive-optics SPHERE/ZIMPOL camera (ID 199.C-0074, PI P. Vernazza) and complemented this data set with earlier Keck/NIRC2 and VLT/NACO observations. We analyzed the dynamics of the satellite with our Genoid meta-heuristic algorithm. Combining our high-angular resolution images with optical lightcurves and stellar occultations, we determine the spin period, orientation, and 3-D shape, using our ADAM shape modeling algorithm. Results. The satellite orbits Daphne on an equatorial, quasi-circular, prograde orbit, like the satellites of many other large main-belt asteroids. The shape model of Daphne reveals several large flat areas that could be large impact craters. The mass determined from this orbit combined with the volume computed from the shape model implies a density for Daphne of 1.77+/-0.26 g/cm3 (3 σ). This density is consistent with a primordial CM-like homogeneous internal structure with some level of macroporosity (~17%). Conclusions. Based on our analysis of the density of Daphne and 75 other Ch/Cgh-type asteroids gathered from the literature, we conclude that the primordial internal structure of the CM parent bodies was homogeneous.
△ Less
Submitted 7 January, 2019;
originally announced January 2019.
-
(16) Psyche: A mesosiderite-like asteroid?
Authors:
M. Viikinkoski,
P. Vernazza,
J. Hanus,
H. Le Coroller,
K. Tazhenova,
B. Carry,
M. Marsset,
A. Drouard,
F. Marchis,
R. Fetick,
T. Fusco,
J. Durech,
M. Birlan,
J. Berthier,
P. Bartczak,
C. Dumas,
J. Castillo-Rogez,
F. Cipriani,
F. Colas,
M. Ferrais,
J. Grice,
E. Jehin,
L. Jorda,
M. Kaasalainen,
A. Kryszczynska
, et al. (13 additional authors not shown)
Abstract:
Asteroid (16) Psyche is the target of the NASA Psyche mission. It is considered one of the few main-belt bodies that could be an exposed proto-planetary metallic core and that would thus be related to iron meteorites. Such an association is however challenged by both its near- and mid-infrared spectral properties and the reported estimates of its density. Here, we aim to refine the density of (16)…
▽ More
Asteroid (16) Psyche is the target of the NASA Psyche mission. It is considered one of the few main-belt bodies that could be an exposed proto-planetary metallic core and that would thus be related to iron meteorites. Such an association is however challenged by both its near- and mid-infrared spectral properties and the reported estimates of its density. Here, we aim to refine the density of (16) Psyche to set further constraints on its bulk composition and determine its potential meteoritic analog.
We observed (16) Psyche with ESO VLT/SPHERE/ZIMPOL as part of our large program (ID 199.C-0074). We used the high angular resolution of these observations to refine Psyche's three-dimensional (3D) shape model and subsequently its density when combined with the most recent mass estimates. In addition, we searched for potential companions around the asteroid. We derived a bulk density of 3.99\,$\pm$\,0.26\,g$\cdot$cm$^{-3}$ for Psyche. While such density is incompatible at the 3-sigma level with any iron meteorites ($\sim$7.8\,g$\cdot$cm$^{-3}$), it appears fully consistent with that of stony-iron meteorites such as mesosiderites (density $\sim$4.25\,$\cdot$cm$^{-3}$). In addition, we found no satellite in our images and set an upper limit on the diameter of any non-detected satellite of 1460\,$\pm$\,200}\,m at 150\,km from Psyche (0.2\%\,$\times$\,R$_{Hill}$, the Hill radius) and 800\,$\pm$\,200\,m at 2,000\,km (3\%\,$\times$\,$R_{Hill}$).
Considering that the visible and near-infrared spectral properties of mesosiderites are similar to those of Psyche, there is merit to a long-published initial hypothesis that Psyche could be a plausible candidate parent body for mesosiderites.
△ Less
Submitted 5 October, 2018;
originally announced October 2018.
-
Against the biases in spins and shapes of asteroids
Authors:
A. Marciniak,
F. Pilcher,
D. Oszkiewicz,
T. Santana-Ros,
S. Urakawa,
S. Fauvaud,
P. Kankiewicz,
Ł. Tychoniec,
M. Fauvaud,
R. Hirsch,
J. Horbowicz,
K. Kamiński,
I. Konstanciak,
E. Kosturkiewicz,
M. Murawiecka,
J. Nadolny,
K. Nishiyama,
S. Okumura,
M. Polińska,
F. Richard,
T. Sakamoto,
K. Sobkowiak,
G. Stachowski,
P. Trela
Abstract:
Physical studies of asteroids depend on an availability of lightcurve data. Targets that are easy to observe and analyse naturally have more data available, so their synodic periods are confirmed from multiple sources. Also, thanks to availability of data from a number of apparitions, their spin and shape models can often be obtained.
Almost half of bright (H<=11 mag) main-belt asteroid populati…
▽ More
Physical studies of asteroids depend on an availability of lightcurve data. Targets that are easy to observe and analyse naturally have more data available, so their synodic periods are confirmed from multiple sources. Also, thanks to availability of data from a number of apparitions, their spin and shape models can often be obtained.
Almost half of bright (H<=11 mag) main-belt asteroid population with known lightcurve parameters have rotation periods considered long (P>12 hours) and are rarely chosen for photometric observations. There is a similar selection effect against asteroids with low lightcurve amplitudes (a_max<=0.25 mag). As a result such targets, though numerous in this brightness range, are underrepresented in the sample of spin and shape modelled asteroids. In the range of fainter targets such effects are stronger. These selection effects can influence what is now known about asteroid spin vs. size distribution, on asteroid internal structure and densities and on spatial orientation of asteroid spin axes.
To reduce both biases at the same time, we started a photometric survey of a substantial sample of those bright main-belt asteroids that displayed both features: periods longer than 12 hours, and amplitudes that did not exceed 0.25 magnitude. First we aim at finding synodic periods of rotation, and after a few observed apparitions, obtaining spin and shape models.
As an initial result of our survey we found that a quarter of the studied sample (8 out of 34 targets) have rotation periods different from those widely accepted. We publish here these newly found period values with the lightcurves.
The size/frequency plot might in reality look different in the long-period range. Further studies of asteroid spins, shapes, and structure should take into account serious biases that are present in the parameters available today.
△ Less
Submitted 7 November, 2017;
originally announced November 2017.
-
Photometric survey, modelling, and scaling of long-period and low-amplitude asteroids
Authors:
A. Marciniak,
P. Bartczak,
T. Müller,
J. J. Sanabria,
V. Alí-Lagoa,
P. Antonini,
R. Behrend,
L. Bernasconi,
M. Bronikowska,
M. Butkiewicz - Bąk,
A. Cikota,
R. Crippa,
R. Ditteon,
G. Dudziński,
R. Duffard,
K. Dziadura,
S. Fauvaud,
S. Geier,
R. Hirsch,
J. Horbowicz,
M. Hren,
L. Jerosimic,
K. Kamiński,
P. Kankiewicz,
I. Konstanciak
, et al. (18 additional authors not shown)
Abstract:
The available set of spin and shape modelled asteroids is strongly biased against slowly rotating targets and those with low lightcurve amplitudes. As a consequence of these selection effects, the current picture of asteroid spin axis distribution, rotation rates, or radiometric properties, might be affected too.
To counteract these selection effects, we are running a photometric campaign of a l…
▽ More
The available set of spin and shape modelled asteroids is strongly biased against slowly rotating targets and those with low lightcurve amplitudes. As a consequence of these selection effects, the current picture of asteroid spin axis distribution, rotation rates, or radiometric properties, might be affected too.
To counteract these selection effects, we are running a photometric campaign of a large sample of main belt asteroids omitted in most previous studies. We determined synodic rotation periods and verified previous determinations. When a dataset for a given target was sufficiently large and varied, we performed spin and shape modelling with two different methods.
We used the convex inversion method and the non-convex SAGE algorithm, applied on the same datasets of dense lightcurves. Unlike convex inversion, the SAGE method allows for the existence of valleys and indentations on the shapes based only on lightcurves.
We obtained detailed spin and shape models for the first five targets of our sample: (159) Aemilia, (227) Philosophia, (329) Svea, (478) Tergeste, and (487) Venetia. When compared to stellar occultation chords, our models obtained an absolute size scale and major topographic features of the shape models were also confirmed. When applied to thermophysical modelling, they provided a very good fit to the infrared data and allowed their size, albedo, and thermal inertia to be determined.
Convex and non-convex shape models provide comparable fits to lightcurves. However, some non-convex models fit notably better to stellar occultation chords and to infrared data in sophisticated thermophysical modelling (TPM). In some cases TPM showed strong preference for one of the spin and shape solutions. Also, we confirmed that slowly rotating asteroids tend to have higher-than-average values of thermal inertia.
△ Less
Submitted 6 November, 2017;
originally announced November 2017.
-
Small Bodies Near and Far (SBNAF): a benchmark study on physical and thermal properties of small bodies in the Solar System
Authors:
T. G. Müller,
A. Marciniak,
C. Kiss,
R. Duffard,
V. Alí-Lagoa,
P. Bartczak,
M. Butkiewicz-Bąk,
G. Dudziński,
E. Fernández-Valenzuela,
G. Marton,
N. Morales,
J. -L. Ortiz,
D. Oszkiewicz,
T. Santana-Ros,
R. Szakáts,
P. Santos-Sanz,
A. Takácsné Farkas,
E. Varga-Verebélyi
Abstract:
The combination of visible and thermal data from the ground and astrophysics space missions is key to improving the scientific understanding of near-Earth, main-belt, trojans, centaurs, and trans-Neptunian objects. To get full information on a small sample of selected bodies we combine different methods and techniques: lightcurve inversion, stellar occultations, thermophysical modeling, radiometri…
▽ More
The combination of visible and thermal data from the ground and astrophysics space missions is key to improving the scientific understanding of near-Earth, main-belt, trojans, centaurs, and trans-Neptunian objects. To get full information on a small sample of selected bodies we combine different methods and techniques: lightcurve inversion, stellar occultations, thermophysical modeling, radiometric methods, radar ranging and adaptive optics imaging. The SBNAF project will derive size, spin and shape, thermal inertia, surface roughness, and in some cases bulk densities and even internal structure and composition, for objects out to the most distant regions in the Solar System. The applications to objects with ground-truth information allows us to advance the techniques beyond the current state-of-the-art and to assess the limitations of each method. We present results from our project's first phase: the analysis of combined Herschel-KeplerK2 data and Herschel-occultation data for TNOs; synergy studies on large MBAs from combined high-quality visual and thermal data; establishment of well-known asteroids as celestial calibrators for far-infrared, sub-millimetre, and millimetre projects; first results on near-Earth asteroids properties from combined lightcurve, radar and thermal measurements, as well as the Hayabusa-2 mission target characterisation. We also introduce public web-services and tools for studies of small bodies in general.
△ Less
Submitted 25 October, 2017;
originally announced October 2017.
-
Shape and spin determination of Barbarian asteroids
Authors:
M. Devogèle,
P. Tanga,
P. Bendjoya,
J. P. Rivet,
J. Surdej,
J. Hanus,
L. Abe,
P. Antonini,
R. A. Artola,
M. Audejean,
R. Behrend,
F. Berski,
J. G. Bosch,
M. Bronikowska,
A. Carbognani,
F. Char,
M. -J. Kim,
Y. -J. Choi,
C. A. Colazo,
J. Coloma,
D. Coward,
R. Durkee,
O. Erece,
E. Forne,
P. Hickson
, et al. (29 additional authors not shown)
Abstract:
Context. The so-called Barbarian asteroids share peculiar, but common polarimetric properties, probably related to both their shape and composition. They are named after (234) Barbara, the first on which such properties were identified. As has been suggested, large scale topographic features could play a role in the polarimetric response, if the shapes of Barbarians are particularly irregular and…
▽ More
Context. The so-called Barbarian asteroids share peculiar, but common polarimetric properties, probably related to both their shape and composition. They are named after (234) Barbara, the first on which such properties were identified. As has been suggested, large scale topographic features could play a role in the polarimetric response, if the shapes of Barbarians are particularly irregular and present a variety of scattering/incidence angles. This idea is supported by the shape of (234) Barbara, that appears to be deeply excavated by wide concave areas revealed by photometry and stellar occultations. Aims. With these motivations, we started an observation campaign to characterise the shape and rotation properties of Small Main- Belt Asteroid Spectroscopic Survey (SMASS) type L and Ld asteroids. As many of them show long rotation periods, we activated a worldwide network of observers to obtain a dense temporal coverage. Methods. We used light-curve inversion technique in order to determine the sidereal rotation periods of 15 asteroids and the con- vergence to a stable shape and pole coordinates for 8 of them. By using available data from occultations, we are able to scale some shapes to an absolute size. We also study the rotation periods of our sample looking for confirmation of the suspected abundance of asteroids with long rotation periods. Results. Our results show that the shape models of our sample do not seem to have peculiar properties with respect to asteroids with similar size, while an excess of slow rotators is most probably confirmed.
△ Less
Submitted 24 July, 2017;
originally announced July 2017.
-
Statistical analysis of the ambiguities in the asteroid period determinations
Authors:
M. Butkiewicz-Bąk,
T. Kwiatkowski,
P. Bartczak,
G. Dudziński,
A. Marciniak
Abstract:
Among asteroids there exist ambiguities in their rotation period determinations. They are due to incomplete coverage of the rotation, noise and/or aliases resulting from gaps between separate lightcurves. To help to remove such uncertainties, basic characteristic of the lightcurves resulting from constraints imposed by the asteroid shapes and geometries of observations should be identified. We sim…
▽ More
Among asteroids there exist ambiguities in their rotation period determinations. They are due to incomplete coverage of the rotation, noise and/or aliases resulting from gaps between separate lightcurves. To help to remove such uncertainties, basic characteristic of the lightcurves resulting from constraints imposed by the asteroid shapes and geometries of observations should be identified. We simulated light variations of asteroids which shapes were modelled as Gaussian random spheres, with random orientations of spin vectors and phase angles changed every $5^\circ$ from $0^\circ$ to $65^\circ$. This produced 1.4 mln lightcurves. For each simulated lightcurve Fourier analysis has been made and the harmonic of the highest amplitude was recorded. From the statistical point of view, all lightcurves observed at phase angles $α< 30^\circ$, with peak-to-peak amplitudes $A>0.2$ mag are bimodal. Second most frequently dominating harmonic is the first one, with the 3rd harmonic following right after. For 1% of lightcurves with amplitudes $A < 0.1$ mag and phase angles $α< 40^\circ$ 4th harmonic dominates.
△ Less
Submitted 14 July, 2017;
originally announced July 2017.
-
Non-Vestoid candidate asteroids in the inner main belt
Authors:
Dagmara Oszkiewicz,
Brian A. Skiff,
Nick Moskovitz,
Paweł Kankiewicz,
Anna Marciniak,
Javier Licandro,
Mattia Galiazzo,
Werner Zeilinger
Abstract:
Most Howardite-Eucrite-Diogenite (HED) meteorites (analogs to V-type asteroids) are thought to originate from asteroid (4) Vesta. However, some HEDs show distinct oxygen isotope ratios and therefore are thought to originate from other asteroids. In this study, we try to identify asteroids that may represent parent bodies of those mismatching HEDs. In particular, the origin of the anomalous Bunburr…
▽ More
Most Howardite-Eucrite-Diogenite (HED) meteorites (analogs to V-type asteroids) are thought to originate from asteroid (4) Vesta. However, some HEDs show distinct oxygen isotope ratios and therefore are thought to originate from other asteroids. In this study, we try to identify asteroids that may represent parent bodies of those mismatching HEDs. In particular, the origin of the anomalous Bunburra Rockhole meteorite was traced back to the inner main asteroid belt, showing that there might be asteroids that are not genetically linked to the asteroid (4) Vesta (the main source of V-type asteroids and HED meteorites) in the inner main belt. In this work we identify V-type asteroids outside the dynamical Vesta family whose rotational properties (retrograde vs prograde rotation) suggest the direction of Yarkovsky drift that sets them apart from typical Vestoids and Vesta fugitives. Specifically Nesvorny et al. 2008 simulated escapes paths from the Vesta family and showed that typical Vesta fugitives in the inner main asteroid belt at semi-major axis a < 2.3 AU have to have retrograde rotations and physical and thermal parameters that maximize the Yarkovsky force in order to evolve to scattered orbits within 1-2 Gyrs (age of the Vesta collisional family). Therefore large asteroids outside the Vesta family and with a < 2.3 AU and having thermal and rotational properties minimizing the Yarkovsky drift or showing Yarkovsky drift direction towards (4) Vesta are the best candidates for non-Vestoids V-type asteroids and therefore parent bodies of anomalous HED. In this study, we have performed accurate photometric observations and determined sense of rotation for several asteroids testing their links to Vesta and anomalous HED. We have found several potential non-Vestoid candidates. Those objects have to be studied in more detail to fully confirm their link to anomalous HEDs.
△ Less
Submitted 22 December, 2016;
originally announced December 2016.
-
Large Halloween Asteroid at Lunar Distance
Authors:
T. G. Müller,
A. Marciniak,
M. Butkiewicz-Bąk,
R. Duffard,
D. Oszkiewicz,
H. U. Käufl,
R. Szakáts,
T. Santana-Ros,
C. Kiss,
P. Santos-Sanz
Abstract:
The near-Earth asteroid (NEA) 2015 TB145 had a very close encounter with Earth at 1.3 lunar distances on October 31, 2015. We obtained 3-band mid-infrared observations with the ESO VLT-VISIR instrument and visual lightcurves during the close-encounter phase. The NEA has a (most likely) rotation period of 2.939 +/- 0.005 hours and the visual lightcurve shows a peak-to-peak amplitude of approximatel…
▽ More
The near-Earth asteroid (NEA) 2015 TB145 had a very close encounter with Earth at 1.3 lunar distances on October 31, 2015. We obtained 3-band mid-infrared observations with the ESO VLT-VISIR instrument and visual lightcurves during the close-encounter phase. The NEA has a (most likely) rotation period of 2.939 +/- 0.005 hours and the visual lightcurve shows a peak-to-peak amplitude of approximately 0.12+/-0.02 mag. We estimate a V-R colour of 0.56+/-0.05 mag from MPC database entries. Applying different phase relations to the available R-/V-band observations produced H_R = 18.6 mag (standard H-G calculations) or H_R = 19.2 mag & H_V = 19.8 mag (via the H-G12 procedure), with large uncertainties of approximately 1 mag. We performed a detailed thermophysical model analysis by using spherical and ellipsoidal shape models. The thermal properties are best explained by an equator-on (+/- ~30 deg) viewing geometry during our measurements with a thermal inertia in the range 250-700 Jm-2s-0.5K-1 (retrograde rotation) or above 500 Jm-2s-0.5K-1 (prograde rotation). We find that the NEA has a minimum size of 625 m, a maximum size of just below 700 m, and a slightly elongated shape with a/b ~1.1. The best match to all thermal measurements is found for: (i) Thermal inertia of 900 Jm-2s-0.5K-1; D_eff = 644 m, p_V = 5.5% (prograde rotation); regolith grain sizes of ~50-100 mm; (ii) thermal inertia of 400 Jm-2s-0.5K-1; D_eff = 667 m, p_V = 5.1% (retrograde rotation); regolith grain sizes of ~10-20 mm. A near-Earth asteroid model (NEATM) confirms an object size well above 600 m, significantly larger than early estimates based on radar measurements. We give recommendations for improved observing strategies for similar events in the future.
△ Less
Submitted 26 October, 2016;
originally announced October 2016.
-
New and updated convex shape models of asteroids based on optical data from a large collaboration network
Authors:
J. Hanuš,
J. Ďurech,
D. A. Oszkiewicz,
R. Behrend,
B. Carry,
M. Delbo',
O. Adam,
V. Afonina,
R. Anquetin,
P. Antonini,
L. Arnold,
M. Audejean,
P. Aurard,
M. Bachschmidt,
B. Badue,
E. Barbotin,
P. Barroy,
P. Baudouin,
L. Berard,
N. Berger,
L. Bernasconi,
J-G. Bosch,
S. Bouley,
I. Bozhinova,
J. Brinsfield
, et al. (144 additional authors not shown)
Abstract:
Asteroid modeling efforts in the last decade resulted in a comprehensive dataset of almost 400 convex shape models and their rotation states. This amount already provided a deep insight into physical properties of main-belt asteroids or large collisional families. We aim to increase the number of asteroid shape models and rotation states. Such results are an important input for various further stu…
▽ More
Asteroid modeling efforts in the last decade resulted in a comprehensive dataset of almost 400 convex shape models and their rotation states. This amount already provided a deep insight into physical properties of main-belt asteroids or large collisional families. We aim to increase the number of asteroid shape models and rotation states. Such results are an important input for various further studies such as analysis of asteroid physical properties in different populations, including smaller collisional families, thermophysical modeling, and scaling shape models by disk-resolved images, or stellar occultation data. This provides, in combination with known masses, bulk density estimates, but constrains also theoretical collisional and evolutional models of the Solar System. We use all available disk-integrated optical data (i.e., classical dense-in-time photometry obtained from public databases and through a large collaboration network as well as sparse-in-time individual measurements from a few sky surveys) as an input for the convex inversion method, and derive 3D shape models of asteroids, together with their rotation periods and orientations of rotation axes. The key ingredient is the support of more that one hundred observers who submit their optical data to publicly available databases. We present updated shape models for 36 asteroids, for which mass estimates are currently available in the literature or their masses will be most likely determined from their gravitational influence on smaller bodies, which orbital deflection will be observed by the ESA Gaia astrometric mission. This was achieved by using additional optical data from recent apparitions for the shape optimization. Moreover, we also present new shape model determinations for 250 asteroids, including 13 Hungarias and 3 near-Earth asteroids.
△ Less
Submitted 26 October, 2015;
originally announced October 2015.
-
The small binary asteroid (939) Isberga
Authors:
B. Carry,
A. Matter,
P. Scheirich,
P. Pravec,
L. Molnar,
S. Mottola,
A. Carbognani,
E. Jehin,
A. Marciniak,
R. P. Binzel,
F. E. DeMeo,
M. Birlan,
M. Delbo,
E. Barbotin,
R. Behrend,
M. Bonnardeau,
F. Colas,
P. Farissier,
M. Fauvaud,
S. Fauvaud,
C. Gillier,
M. Gillon,
S. Hellmich,
R. Hirsch,
A. Leroy
, et al. (7 additional authors not shown)
Abstract:
In understanding the composition and internal structure of asteroids, their density is perhaps the most diagnostic quantity. We aim here to characterize the surface composition, mutual orbit, size, mass, and density of the small main-belt binary asteroid (939) Isberga. For that, we conduct a suite of multi-technique observations, including optical lightcurves over many epochs, near-infrared spectr…
▽ More
In understanding the composition and internal structure of asteroids, their density is perhaps the most diagnostic quantity. We aim here to characterize the surface composition, mutual orbit, size, mass, and density of the small main-belt binary asteroid (939) Isberga. For that, we conduct a suite of multi-technique observations, including optical lightcurves over many epochs, near-infrared spectroscopy, and interferometry in the thermal infrared. We develop a simple geometric model of binary systems to analyze the interferometric data in combination with the results of the lightcurve modeling. From spectroscopy, we classify Ibserga as a Sq-type asteroid, consistent with the albedo of 0.14$^{+0.09}_{-0.06}$ (all uncertainties are reported as 3-$σ$ range) we determine (average albedo of S-types is 0.197 $\pm$ 0.153, Pravec et al., 2012, Icarus 221, 365-387). Lightcurve analysis reveals that the mutual orbit has a period of 26.6304 $\pm$ 0.0001 h, is close to circular, and has pole coordinates within 7 deg. of (225, +86) in ECJ2000, implying a low obliquity of 1.5 deg. The combined analysis of lightcurves and interferometric data allows us to determine the dimension of the system and we find volume-equivalent diameters of 12.4$^{+2.5}_{-1.2}$ km and 3.6$^{+0.7}_{-0.3}$ km for Isberga and its satellite, circling each other on a 33 km wide orbit. Their density is assumed equal and found to be $2.91^{+1.72}_{-2.01}$ g.cm$^{-3}$, lower than that of the associated ordinary chondrite meteorites, suggesting the presence of some macroporosity, but typical of S-types of the same size range (Carry, 2012, P\&SS 73, 98-118). The present study is the first direct measurement of the size of a small main-belt binary. Although the interferometric observations of Isberga are at the edge of MIDI capabilities, the method described here is applicable to others suites of instruments (e.g, LBT, ALMA).
△ Less
Submitted 4 November, 2014;
originally announced November 2014.
-
CzeV404 - an eclipsing dwarf nova in the period gap during its July 2014 superoutburst
Authors:
K. Bakowska,
A. Olech,
R. Pospieszynski,
F. Martinelli,
A. Marciniak
Abstract:
Results of the CCD observations of CzeV404 Her are displayed. During the season of June-August 2014 we detected one outburst and one superoutburst of the star. Clear superhumps with the period of P_sh=0.10472(2) days were observed. The superhump period was decreasing with a high value of P_dot=-2.43(8) x 10^(-4). For 17 eclipses, we calculated an orbital period with the value of P_orb=0.0980203(6)…
▽ More
Results of the CCD observations of CzeV404 Her are displayed. During the season of June-August 2014 we detected one outburst and one superoutburst of the star. Clear superhumps with the period of P_sh=0.10472(2) days were observed. The superhump period was decreasing with a high value of P_dot=-2.43(8) x 10^(-4). For 17 eclipses, we calculated an orbital period with the value of P_orb=0.0980203(6) days which indicates that CzeV404 Her belongs to period gap objects and it is the longest orbital period eclipsing SU UMa star. Based on superhump and orbital period determinations, the period excess 6.8 % +/- 0.02 % and the mass ratio q ~ 0.32 of the system were obtained.
△ Less
Submitted 31 December, 2014; v1 submitted 3 November, 2014;
originally announced November 2014.
-
Asteroids' physical models from combined dense and sparse photometry and scaling of the YORP effect by the observed obliquity distribution
Authors:
J. Hanuš,
J. Ďurech,
M. Brož,
A. Marciniak,
B. D. Warner,
F. Pilcher,
R. Stephens,
R. Behrend,
B. Carry,
D. Čapek,
P. Antonini,
M. Audejean,
K. Augustesen,
E. Barbotin,
P. Baudouin,
A. Bayol,
L. Bernasconi,
W. Borczyk,
J. -G. Bosch,
E. Brochard,
L. Brunetto,
S. Casulli,
A. Cazenave,
S. Charbonnel,
B. Christophe
, et al. (95 additional authors not shown)
Abstract:
The larger number of models of asteroid shapes and their rotational states derived by the lightcurve inversion give us better insight into both the nature of individual objects and the whole asteroid population. With a larger statistical sample we can study the physical properties of asteroid populations, such as main-belt asteroids or individual asteroid families, in more detail. Shape models can…
▽ More
The larger number of models of asteroid shapes and their rotational states derived by the lightcurve inversion give us better insight into both the nature of individual objects and the whole asteroid population. With a larger statistical sample we can study the physical properties of asteroid populations, such as main-belt asteroids or individual asteroid families, in more detail. Shape models can also be used in combination with other types of observational data (IR, adaptive optics images, stellar occultations), e.g., to determine sizes and thermal properties. We use all available photometric data of asteroids to derive their physical models by the lightcurve inversion method and compare the observed pole latitude distributions of all asteroids with known convex shape models with the simulated pole latitude distributions. We used classical dense photometric lightcurves from several sources and sparse-in-time photometry from the U.S. Naval Observatory in Flagstaff, Catalina Sky Survey, and La Palma surveys (IAU codes 689, 703, 950) in the lightcurve inversion method to determine asteroid convex models and their rotational states. We also extended a simple dynamical model for the spin evolution of asteroids used in our previous paper. We present 119 new asteroid models derived from combined dense and sparse-in-time photometry. We discuss the reliability of asteroid shape models derived only from Catalina Sky Survey data (IAU code 703) and present 20 such models. By using different values for a scaling parameter cYORP (corresponds to the magnitude of the YORP momentum) in the dynamical model for the spin evolution and by comparing synthetics and observed pole-latitude distributions, we were able to constrain the typical values of the cYORP parameter as between 0.05 and 0.6.
△ Less
Submitted 29 January, 2013;
originally announced January 2013.