Showing 1–12 of 12 results for author: Luu, V

Data downloaded via parachute from a NASA super-pressure balloon

Authors: Ellen L. Sirks, Richard Massey, Ajay S. Gill, Jason Anderson, Steven J. Benton, Anthony M. Brown, Paul Clark, Joshua English, Spencer W. Everett, Aurelien A. Fraisse, Hugo Franco, John W. Hartley, David Harvey, Bradley Holder, Andrew Hunter, Eric M. Huff, Andrew Hynous, Mathilde Jauzac, William C. Jones, Nikky Joyce, Duncan Kennedy, David Lagattuta, Jason S. -Y. Leung, Lun Li, Stephen Lishman , et al. (18 additional authors not shown)

Abstract: In April to May 2023, the superBIT telescope was lifted to the Earth's stratosphere by a helium-filled super-pressure balloon, to acquire astronomical imaging from above (99.5% of) the Earth's atmosphere. It was launched from New Zealand then, for 40 days, circumnavigated the globe five times at a latitude 40 to 50 degrees South. Attached to the telescope were four 'DRS' (Data Recovery System) cap… ▽ More In April to May 2023, the superBIT telescope was lifted to the Earth's stratosphere by a helium-filled super-pressure balloon, to acquire astronomical imaging from above (99.5% of) the Earth's atmosphere. It was launched from New Zealand then, for 40 days, circumnavigated the globe five times at a latitude 40 to 50 degrees South. Attached to the telescope were four 'DRS' (Data Recovery System) capsules containing 5 TB solid state data storage, plus a GNSS receiver, Iridium transmitter, and parachute. Data from the telescope were copied to these, and two were dropped over Argentina. They drifted 61 km horizontally while they descended 32 km, but we predicted their descent vectors within 2.4 km: in this location, the discrepancy appears irreducible below 2 km because of high speed, gusty winds and local topography. The capsules then reported their own locations to within a few metres. We recovered the capsules and successfully retrieved all of superBIT's data - despite the telescope itself being later destroyed on landing. △ Less

Submitted 14 November, 2023; originally announced November 2023.

Comments: 12 pages

Journal ref: Aerospace 2023, 10, 960

Lensing in the Blue II: Estimating the Sensitivity of Stratospheric Balloons to Weak Gravitational Lensing

Authors: Jacqueline E. McCleary, Spencer W. Everett, Mohamed M. Shaaban, Ajay S. Gill, Georgios N. Vassilakis, Eric M. Huff, Richard J. Massey, Steven J. Benton, Anthony M. Brown, Paul Clark, Bradley Holder, Aurelien A. Fraisse, Mathilde Jauzac, William C. Jones, David Lagattuta, Jason S. -Y. Leung, Lun Li, Thuy Vy T. Luu, Johanna M. Nagy, C. Barth Netterfield, Emaad Paracha, Susan F. Redmond, Jason D. Rhodes, J\''urgen Schmoll, Ellen Sirks , et al. (1 additional authors not shown)

Abstract: The Superpressure Balloon-borne Imaging Telescope (SuperBIT) is a diffraction-limited, wide-field, 0.5 m, near-infrared to near-ultraviolet observatory designed to exploit the stratosphere's space-like conditions. SuperBIT's 2023 science flight will deliver deep, blue imaging of galaxy clusters for gravitational lensing analysis. In preparation, we have developed a weak lensing measurement pipelin… ▽ More The Superpressure Balloon-borne Imaging Telescope (SuperBIT) is a diffraction-limited, wide-field, 0.5 m, near-infrared to near-ultraviolet observatory designed to exploit the stratosphere's space-like conditions. SuperBIT's 2023 science flight will deliver deep, blue imaging of galaxy clusters for gravitational lensing analysis. In preparation, we have developed a weak lensing measurement pipeline with modern algorithms for PSF characterization, shape measurement, and shear calibration. We validate our pipeline and forecast SuperBIT survey properties with simulated galaxy cluster observations in SuperBIT's near-UV and blue bandpasses. We predict imaging depth, galaxy number (source) density, and redshift distribution for observations in SuperBIT's three bluest filters; the effect of lensing sample selections is also considered. We find that in three hours of on-sky integration, SuperBIT can attain a depth of b = 26 mag and a total source density exceeding 40 galaxies per square arcminute. Even with the application of lensing-analysis catalog selections, we find b-band source densities between 25 and 30 galaxies per square arcminute with a median redshift of z = 1.1. Our analysis confirms SuperBIT's capability for weak gravitational lensing measurements in the blue. △ Less

Submitted 6 July, 2023; originally announced July 2023.

Comments: Submitted to Astronomical Journal

Optical night sky brightness measurements from the stratosphere

Authors: Ajay Gill, Steven J. Benton, Anthony M. Brown, Paul Clark, Christopher J. Damaren, Tim Eifler, Aurelien A. Fraisse, Mathew N. Galloway, John W. Hartley, Bradley Holder, Eric M. Huff, Mathilde Jauzac, William C. Jones, David Lagattuta, Jason S. -Y Leung, Lun Li, Thuy Vy T. Luu, Richard J. Massey, Jacqueline McCleary, James Mullaney, Johanna M. Nagy, C. Barth Netterfield, Susan Redmond, Jason D. Rhodes, L. Javier Romualdez , et al. (5 additional authors not shown)

Abstract: This paper presents optical night sky brightness measurements from the stratosphere using CCD images taken with the Super-pressure Balloon-borne Imaging Telescope (SuperBIT). The data used for estimating the backgrounds were obtained during three commissioning flights in 2016, 2018, and 2019 at altitudes ranging from 28 km to 34 km above sea level. For a valid comparison of the brightness measurem… ▽ More This paper presents optical night sky brightness measurements from the stratosphere using CCD images taken with the Super-pressure Balloon-borne Imaging Telescope (SuperBIT). The data used for estimating the backgrounds were obtained during three commissioning flights in 2016, 2018, and 2019 at altitudes ranging from 28 km to 34 km above sea level. For a valid comparison of the brightness measurements from the stratosphere with measurements from mountain-top ground-based observatories (taken at zenith on the darkest moonless night at high Galactic and high ecliptic latitudes), the stratospheric brightness levels were zodiacal light and diffuse Galactic light subtracted, and the airglow brightness was projected to zenith. The stratospheric brightness was measured around 5.5 hours, 3 hours, and 2 hours before the local sunrise time in 2016, 2018, and 2019 respectively. The $B$, $V$, $R$, and $I$ brightness levels in 2016 were 2.7, 1.0, 1.1, and 0.6 mag arcsec$^{-2}$ darker than the darkest ground-based measurements. The $B$, $V$, and $R$ brightness levels in 2018 were 1.3, 1.0, and 1.3 mag arcsec$^{-2}$ darker than the darkest ground-based measurements. The $U$ and $I$ brightness levels in 2019 were 0.1 mag arcsec$^{-2}$ brighter than the darkest ground-based measurements, whereas the $B$ and $V$ brightness levels were 0.8 and 0.6 mag arcsec$^{-2}$ darker than the darkest ground-based measurements. The lower sky brightness levels, stable photometry, and lower atmospheric absorption make stratospheric observations from a balloon-borne platform a unique tool for astronomy. We plan to continue this work in a future mid-latitude long duration balloon flight with SuperBIT. △ Less

Submitted 10 October, 2020; originally announced October 2020.

Comments: 17 pages, 7 figures. Accepted for publication in the Astronomical Journal

Journal ref: The Astronomical Journal, Volume 160, Number 6, 2020

Download by Parachute: Retrieval of Assets from High Altitude Balloons

Authors: E. L. Sirks, P. Clark, R. J. Massey, S. J. Benton, A. M. Brown, C. J. Damaren, T. Eifler, A. A. Fraisse, C. Frenk, M. Funk, M. N. Galloway, A. Gill, J. W. Hartley, B. Holder, E. M. Huff, M. Jauzac, W. C. Jones, D. Lagattuta, J. S. -Y. Leung, L. Li, T. V. T. Luu, J. McCleary, J. M. Nagy, C. B. Netterfield, S. Redmond , et al. (5 additional authors not shown)

Abstract: We present a publicly-available toolkit of flight-proven hardware and software to retrieve 5 TB of data or small physical samples from a stratospheric balloon platform. Before launch, a capsule is attached to the balloon, and rises with it. Upon remote command, the capsule is released and descends via parachute, continuously transmitting its location. Software to predict the trajectory can be used… ▽ More We present a publicly-available toolkit of flight-proven hardware and software to retrieve 5 TB of data or small physical samples from a stratospheric balloon platform. Before launch, a capsule is attached to the balloon, and rises with it. Upon remote command, the capsule is released and descends via parachute, continuously transmitting its location. Software to predict the trajectory can be used to select a safe but accessible landing site. We dropped two such capsules from the SuperBIT telescope, in September 2019. The capsules took ~37 minutes to descend from ~30 km altitude. They drifted 32 km and 19 km horizontally, but landed within 300 m and 600 m of their predicted landing sites. We found them easily, and successfully recovered the data. We welcome interest from other balloon teams for whom the technology would be useful. △ Less

Submitted 22 April, 2020; originally announced April 2020.

Robust diffraction-limited NIR-to-NUV wide-field imaging from stratospheric balloon-borne platforms -- SuperBIT science telescope commissioning flight & performance

Authors: L. Javier Romualdez, Steven J. Benton, Anthony M. Brown, Paul Clark, Christopher J. Damaren, Tim Eifler, Aurelien A. Fraisse, Mathew N. Galloway, Ajay Gill, John W. Hartley, Bradley Holder, Eric M. Huff, Mathilde Jauzac, William C. Jones, David Lagattuta, Jason S. -Y. Leung, Lun Li, Thuy Vy T. Luu, Richard J. Massey, Jacqueline McCleary, James Mullaney, Johanna M. Nagy, C. Barth Netterfield, Susan Redmond, Jason D. Rhodes , et al. (4 additional authors not shown)

Abstract: At a fraction the total cost of an equivalent orbital mission, scientific balloon-borne platforms, operating above 99.7% of the Earth's atmosphere, offer attractive, competitive, and effective observational capabilities -- namely space-like resolution, transmission, and backgrounds -- that are well suited for modern astronomy and cosmology. SuperBIT is a diffraction-limited, wide-field, 0.5 m tele… ▽ More At a fraction the total cost of an equivalent orbital mission, scientific balloon-borne platforms, operating above 99.7% of the Earth's atmosphere, offer attractive, competitive, and effective observational capabilities -- namely space-like resolution, transmission, and backgrounds -- that are well suited for modern astronomy and cosmology. SuperBIT is a diffraction-limited, wide-field, 0.5 m telescope capable of exploiting these observing conditions in order to provide exquisite imaging throughout the near-IR to near-UV. It utilizes a robust active stabilization system that has consistently demonstrated a 1 sigma sky-fixed pointing stability at 48 milliarcseconds over multiple 1 hour observations at float. This is achieved by actively tracking compound pendulations via a three-axis gimballed platform, which provides sky-fixed telescope stability at < 500 milliarcseconds and corrects for field rotation, while employing high-bandwidth tip/tilt optics to remove residual disturbances across the science imaging focal plane. SuperBIT's performance during the 2019 commissioning flight benefited from a customized high-fidelity science-capable telescope designed with exceptional thermo- and opto-mechanical stability as well as tightly constrained static and dynamic coupling between high-rate sensors and telescope optics. At the currently demonstrated level of flight performance, SuperBIT capabilities now surpass the science requirements for a wide variety of experiments in cosmology, astrophysics and stellar dynamics. △ Less

Submitted 25 November, 2019; originally announced November 2019.

Comments: The following article has been submitted to Review of Scientific Instruments (RSI)

Auto-tuned thermal control on stratospheric balloon experiments

Authors: S. Redmond, S. J. Benton, A. M. Brown, P. Clark, C. J. Damaren, T. Eifler, A. A. Fraisse, M. N. Galloway, J. W. Hartley, M. Jauzac, W. C. Jones, L. Li, T. V. T. Luu, R. J. Massey, J. Mccleary, C. B. Netterfield, I. L. Padilla, J. D. Rhodes, L. J. Romualdez, J. Schmoll, S. Tam

Abstract: Balloon-borne telescopes present unique thermal design challenges which are a combination of those present for both space and ground telescopes. At altitudes of 35-40 km, convection effects are minimal and difficult to characterize. Radiation and conduction are the predominant heat transfer mechanisms reducing the thermal design options. For long duration flights payload mass is a function of powe… ▽ More Balloon-borne telescopes present unique thermal design challenges which are a combination of those present for both space and ground telescopes. At altitudes of 35-40 km, convection effects are minimal and difficult to characterize. Radiation and conduction are the predominant heat transfer mechanisms reducing the thermal design options. For long duration flights payload mass is a function of power consumption making it an important optimization parameter. SuperBIT, or the Super-pressure Balloon-borne Imaging Telescope, aims to study weak lensing using a 0.5m modified Dall-Kirkham telescope capable of achieving 0.02" stability and capturing deep exposures from visible to near UV wavelengths. To achieve the theoretical stratospheric diffraction-limited resolution of 0.25", mirror deformation gradients must be kept to within 20nm. The thermal environment must thus be stable on time scales of an hour and the thermal gradients must be minimized on the telescope. SuperBIT plans to implement two types of parameter solvers; one to validate the thermal design and the other to tightly control the thermal environment. △ Less

Submitted 25 July, 2018; originally announced July 2018.

Comments: 10 pages, 8 figures, submitted to and presented at the SPIE Astronomical Telescopes and Instrumentation 2018 conference (Austin, TX). Figure 6 and Figure 8 updated since SPIE submission due to access to better data and author list updated

Journal ref: Proc. SPIE 10700, Ground-based and Airborne Telescopes VII, 107005R (6 July 2018)

Overview, design, and flight results from SuperBIT: a high-resolution, wide-field, visible-to-near-UV balloon-borne astronomical telescope

Authors: L. Javier Romualdez, Steven J. Benton, Anthony M. Brown, Paul Clark, Christopher J. Damaren, Tim Eifler, Aurelien A. Fraisse, Mathew N. Galloway, John W. Hartley, Mathilde Jauzac, William C. Jones, Lun Li, Thuy Vy T. Luu, Richard J. Massey, Jacqueline Mccleary, C. Barth Netterfield, Susan Redmond, Jason D. Rhodes, Jürgen Schmoll, Sut-Ieng Tam

Abstract: Balloon-borne astronomy is a unique tool that allows for a level of image stability and significantly reduced atmospheric interference without the often prohibitive cost and long development time-scale that are characteristic of space-borne facility-class instruments. The Super-pressure Balloon-borne Imaging Telescope (SuperBIT) is a wide-field imager designed to provide 0.02" image stability over… ▽ More Balloon-borne astronomy is a unique tool that allows for a level of image stability and significantly reduced atmospheric interference without the often prohibitive cost and long development time-scale that are characteristic of space-borne facility-class instruments. The Super-pressure Balloon-borne Imaging Telescope (SuperBIT) is a wide-field imager designed to provide 0.02" image stability over a 0.5 degree field-of-view for deep exposures within the visible-to-near-UV (300-900 um). As such, SuperBIT is a suitable platform for a wide range of balloon-borne observations, including solar and extrasolar planetary spectroscopy as well as resolved stellar populations and distant galaxies. We report on the overall payload design and instrumentation methodologies for SuperBIT as well as telescope and image stability results from two test flights. Prospects for the SuperBIT project are outlined with an emphasis on the development of a fully operational, three-month science flight from New Zealand in 2020. △ Less

Submitted 8 July, 2018; originally announced July 2018.

Comments: 15 pages, 7 figures, submitted to and presented at the SPIE Astronomical Telescopes and Instrumentation 2018 conference (Austin, TX). arXiv admin note: text overlap with arXiv:1608.02502

Tau energy loss and ultrahigh energy skimming tau neutrinos

Authors: Yu Seon Jeong, Minh Vu Luu, Mary Hall Reno, Ina Sarcevic

Abstract: We consider propagation of high energy earth-skimming taus produced in interactions of astrophysical tau neutrinos. For astrophysical tau neutrinos we take generic power-law flux, $E^{-2}$ and the cosmogenic flux initiated by the protons. We calculate tau energy loss in several approaches, such as dipole models and the phenomenological approach in which parameterization of the $F_2$ is used. We ev… ▽ More We consider propagation of high energy earth-skimming taus produced in interactions of astrophysical tau neutrinos. For astrophysical tau neutrinos we take generic power-law flux, $E^{-2}$ and the cosmogenic flux initiated by the protons. We calculate tau energy loss in several approaches, such as dipole models and the phenomenological approach in which parameterization of the $F_2$ is used. We evaluate the tau neutrino charged-current cross section using the same approaches for consistency. We find that uncertainty in the neutrino cross section and in the tau energy loss partially compensate giving very small theoretical uncertainty in the emerging tau flux for distances ranging from $2$ km to $100$ km and for the energy range between $10^6$ GeV and $10^{11}$ GeV, focusing on energies above $10^8$ GeV. When we consider uncertainties in the neutrino cross section, inelasticity in neutrino interactions and the tau energy loss, which are not correlated, i.e. they are not all calculated in the same approach, theoretical uncertainty ranges from about $30\%$ and $60 \%$ at $10^8$ GeV to about factors of 3.3 and 3.8 at $10^{11}$ GeV for the $E^{-2}$ flux and the cosmogenic flux, respectively, for the distance of 10 km rock. The spread in predictions significantly increases for much larger distances, e.g., $\sim 1,000$ km. Most of the uncertainty comes from the treatment of photonuclear interactions of the tau in transit through large distances. We also consider Monte Carlo calculation of the tau propagation and we find that the result for the emerging tau flux is in agreement with the result obtained using analytic approach. Our results are relevant to several experiments that are looking for skimming astrophysical taus, such as the Pierre Auger Observatory, HAWC and Ashra. We evaluate the aperture for the Auger and discuss briefly application to the the other two experiments. △ Less

Submitted 7 July, 2017; v1 submitted 31 March, 2017; originally announced April 2017.

Comments: 21 pages and 20 figures

Journal ref: Phys. Rev. D 96, 043003 (2017)

The design and development of a high-resolution visible-to-near-UV telescope for balloon-borne astronomy: SuperBIT

Authors: L. Javier Romualdez, Steven J. Benton, Paul Clark, Christopher J. Damaren, Tim Eifler, Aurelien A. Fraisse, Mathew N. Galloway, John W. Hartley, William C. Jones, Lun Li, Leeav Lipton, Thuy Vy T. Luu, Richard J. Massey, C. Barth Netterfield, Ivan Padilla, Jason D. Rhodes, Jürgen Schmoll

Abstract: Balloon-borne astronomy is unique in that it allows for a level of image stability, resolution, and optical backgrounds that are comparable to space-borne systems due to greatly reduced atmospheric interference, but at a fraction of the cost and over a significantly reduced development time-scale. Instruments operating within visible-to-near-UV bands ($300$ - $900$ um) can achieve a theoretical di… ▽ More Balloon-borne astronomy is unique in that it allows for a level of image stability, resolution, and optical backgrounds that are comparable to space-borne systems due to greatly reduced atmospheric interference, but at a fraction of the cost and over a significantly reduced development time-scale. Instruments operating within visible-to-near-UV bands ($300$ - $900$ um) can achieve a theoretical diffraction limited resolution of $0.01"$ from the stratosphere ($35$ - $40$ km altitude) without the need for extensive adaptive optical systems required by ground-based systems. The {\it Superpressure Balloon-borne Imaging Telescope} ("SuperBIT") is a wide-field imager designed to achieve 0.02$"$ stability over a 0.5$^\circ$ field-of-view, for deep single exposures of up to 5 minutes. SuperBIT is thus well-suited for many astronomical observations, from solar or extrasolar planetary observations, to resolved stellar populations and distant galaxies (whether to study their morphology, evolution, or gravitational lensing by foreground mass). We report SuperBIT's design and implementation, emphasizing its two-stage real-time stabilization: telescope stability to $1$ - $2"$ at the telescope level (a goal surpassed during a test flight in September 2015) and image stability down to $0.02"$ via an actuated tip-tilt mirror in the optical path (to be tested during a flight in 2016). The project is progressing toward a fully operational, three month flight from New Zealand by 2018 △ Less

Submitted 8 August, 2016; originally announced August 2016.

Comments: 12 pages, 5 figures, 2 tables, SPIE Astronomical Telescopes and Instrumentation 2016

Photon noise from chaotic and coherent millimeter-wave sources measured with horn-coupled, aluminum lumped-element kinetic inductance detectors

Authors: Daniel Flanigan, Heather McCarrick, Glenn Jones, Bradley R. Johnson, Maximilian H. Abitbol, Peter Ade, Derek Araujo, Kristi Bradford, Robin Cantor, George Che, Peter K. Day, Simon Doyle, Carl Bjorn Kjellstrand, Henry G LeDuc, Michele Limon, Vy Luu, Philip Mauskopf, Amber Miller, Tony Mroczkowski, Carole Tucker, Jonas Zmuidzinas

Abstract: We report photon-noise limited performance of horn-coupled, aluminum lumped-element kinetic inductance detectors at millimeter wavelengths. The detectors are illuminated by a millimeter-wave source that uses an active multiplier chain to produce radiation between 140 and 160 GHz. We feed the multiplier with either amplified broadband noise or a continuous-wave tone from a microwave signal generato… ▽ More We report photon-noise limited performance of horn-coupled, aluminum lumped-element kinetic inductance detectors at millimeter wavelengths. The detectors are illuminated by a millimeter-wave source that uses an active multiplier chain to produce radiation between 140 and 160 GHz. We feed the multiplier with either amplified broadband noise or a continuous-wave tone from a microwave signal generator. We demonstrate that the detector response over a 40 dB range of source power is well-described by a simple model that considers the number of quasiparticles. The detector noise-equivalent power (NEP) is dominated by photon noise when the absorbed power is greater than approximately 1 pW, which corresponds to $\mathrm{NEP} \approx 2 \times 10^{-17} \, \mathrm{W} \, \mathrm{Hz}^{-1/2}$, referenced to absorbed power. At higher source power levels we observe the relationships between noise and power expected from the photon statistics of the source signal: $\mathrm{NEP} \propto P$ for broadband (chaotic) illumination and $\mathrm{NEP} \propto P^{1/2}$ for continuous-wave (coherent) illumination. △ Less

Submitted 24 May, 2017; v1 submitted 22 October, 2015; originally announced October 2015.

Comments: Matches published version (which is open access) and includes supplemental material

Journal ref: Applied Physics Letters 108, 083504 (2016)

NuSTAR Hard X-ray Survey of the Galactic Center Region I: Hard X-ray Morphology and Spectroscopy of the Diffuse Emission

Authors: Kaya Mori, Charles J. Hailey, Roman Krivonos, Jaesub Hong, Gabriele Ponti, Franz Bauer, Kerstin Perez, Melania Nynka, Shuo Zhang, John A. Tomsick, David M. Alexander, Frederick K. Baganoff, Didier Barret, Nicolas Barriere, Steven E. Boggs, Alicia M. Canipe, Finn E. Christensen, William W. Craig, Karl Forster, Paolo Giommi, Brian W. Grefenstette, Jonathan E. Grindlay, Fiona A. Harrison, Allan Hornstrup, Takao Kitaguchi , et al. (13 additional authors not shown)

Abstract: We present the first sub-arcminute images of the Galactic Center above 10 keV, obtained with NuSTAR. NuSTAR resolves the hard X-ray source IGR J17456-2901 into non-thermal X-ray filaments, molecular clouds, point sources and a previously unknown central component of hard X-ray emission (CHXE). NuSTAR detects four non-thermal X-ray filaments, extending the detection of their power-law spectra with… ▽ More We present the first sub-arcminute images of the Galactic Center above 10 keV, obtained with NuSTAR. NuSTAR resolves the hard X-ray source IGR J17456-2901 into non-thermal X-ray filaments, molecular clouds, point sources and a previously unknown central component of hard X-ray emission (CHXE). NuSTAR detects four non-thermal X-ray filaments, extending the detection of their power-law spectra with $Γ\sim1.3$-$2.3$ up to ~50 keV. A morphological and spectral study of the filaments suggests that their origin may be heterogeneous, where previous studies suggested a common origin in young pulsar wind nebulae (PWNe). NuSTAR detects non-thermal X-ray continuum emission spatially correlated with the 6.4 keV Fe K$α$ fluorescence line emission associated with two Sgr A molecular clouds: MC1 and the Bridge. Broad-band X-ray spectral analysis with a Monte-Carlo based X-ray reflection model self-consistently determined their intrinsic column density ($\sim10^{23}$ cm$^{-2}$), primary X-ray spectra (power-laws with $Γ\sim2$) and set a lower limit of the X-ray luminosity of Sgr A* flare illuminating the Sgr A clouds to $L_X \stackrel{>}{\sim} 10^{38}$ erg s$^{-1}$. Above ~20 keV, hard X-ray emission in the central 10 pc region around Sgr A* consists of the candidate PWN G359.95-0.04 and the CHXE, possibly resulting from an unresolved population of massive CVs with white dwarf masses $M_{\rm WD} \sim 0.9 M_{\odot}$. Spectral energy distribution analysis suggests that G359.95-0.04 is likely the hard X-ray counterpart of the ultra-high gamma-ray source HESS J1745-290, strongly favoring a leptonic origin of the GC TeV emission. △ Less

Submitted 15 October, 2015; originally announced October 2015.

Comments: 27 pages. Accepted for publication in the Astrophysical Journal

Horn-Coupled, Commercially-Fabricated Aluminum Lumped-Element Kinetic Inductance Detectors for Millimeter Wavelengths

Authors: H. McCarrick, D. Flanigan, G. Jones, B. R. Johnson, P. Ade, D. Araujo, K. Bradford, R. Cantor, G. Che, P. Day, S. Doyle, H. Leduc, M. Limon, V. Luu, P. Mauskopf, A. Miller, T. Mroczkowski, C. Tucker, J. Zmuidzinas

Abstract: We discuss the design, fabrication, and testing of prototype horn-coupled, lumped-element kinetic inductance detectors (LEKIDs) designed for cosmic microwave background (CMB) studies. The LEKIDs are made from a thin aluminum film deposited on a silicon wafer and patterned using standard photolithographic techniques at STAR Cryoelectronics, a commercial device foundry. We fabricated twenty-element… ▽ More We discuss the design, fabrication, and testing of prototype horn-coupled, lumped-element kinetic inductance detectors (LEKIDs) designed for cosmic microwave background (CMB) studies. The LEKIDs are made from a thin aluminum film deposited on a silicon wafer and patterned using standard photolithographic techniques at STAR Cryoelectronics, a commercial device foundry. We fabricated twenty-element arrays, optimized for a spectral band centered on 150 GHz, to test the sensitivity and yield of the devices as well as the multiplexing scheme. We characterized the detectors in two configurations. First, the detectors were tested in a dark environment with the horn apertures covered, and second, the horn apertures were pointed towards a beam-filling cryogenic blackbody load. These tests show that the multiplexing scheme is robust and scalable, the yield across multiple LEKID arrays is 91%, and the noise-equivalent temperatures (NET) for a 4 K optical load are in the range 26$\thinspace\pm6 \thinspace μ\mbox{K} \sqrt{\mbox{s}}$. △ Less

Submitted 26 March, 2015; v1 submitted 29 July, 2014; originally announced July 2014.

Journal ref: Rev. Sci. Instrum. 85, 123117 (2014)