-
Coronal voids and their magnetic nature
Authors:
J. D. Nölke,
S. K. Solanki,
J. Hirzberger,
H. Peter,
L. P. Chitta,
F. Kahil,
G. Valori,
T. Wiegelmann,
D. Orozco Suárez,
K. Albert,
N. Albelo Jorge,
T. Appourchaux,
A. Alvarez-Herrero,
J. Blanco Rodríguez,
A. Gandorfer,
D. Germerott,
L. Guerrero,
P. Gutierrez-Marques,
M. Kolleck,
J. C. del Toro Iniesta,
R. Volkmer,
J. Woch,
B. Fiethe,
J. M. Gómez Cama,
I. Pérez-Grande
, et al. (46 additional authors not shown)
Abstract:
Extreme ultraviolet (EUV) observations of the quiet solar atmosphere reveal extended regions of weak emission compared to the ambient quiescent corona. The magnetic nature of these coronal features is not well understood. We study the magnetic properties of the weakly emitting extended regions, which we name coronal voids. In particular, we aim to understand whether these voids result from a reduc…
▽ More
Extreme ultraviolet (EUV) observations of the quiet solar atmosphere reveal extended regions of weak emission compared to the ambient quiescent corona. The magnetic nature of these coronal features is not well understood. We study the magnetic properties of the weakly emitting extended regions, which we name coronal voids. In particular, we aim to understand whether these voids result from a reduced heat input into the corona or if they are associated with mainly unipolar and possibly open magnetic fields, similar to coronal holes. We defined the coronal voids via an intensity threshold of 75% of the mean quiet-Sun (QS) EUV intensity observed by the high-resolution EUV channel (HRIEUV) of the Extreme Ultraviolet Imager on Solar Orbiter. The line-of-sight magnetograms of the same solar region recorded by the High Resolution Telescope of the Polarimetric and Helioseismic Imager allowed us to compare the photospheric magnetic field beneath the coronal voids with that in other parts of the QS. The coronal voids studied here range in size from a few granules to a few supergranules and on average exhibit a reduced intensity of 67% of the mean value of the entire field of view. The magnetic flux density in the photosphere below the voids is 76% (or more) lower than in the surrounding QS. Specifically, the coronal voids show much weaker or no network structures. The detected flux imbalances fall in the range of imbalances found in QS areas of the same size. Conclusions. We conclude that coronal voids form because of locally reduced heating of the corona due to reduced magnetic flux density in the photosphere. This makes them a distinct class of (dark) structure, different from coronal holes.
△ Less
Submitted 18 September, 2023;
originally announced September 2023.
-
Intensity contrast of solar network and faculae close to the solar limb, observed from two vantage points
Authors:
K. Albert,
N. A. Krivova,
J. Hirzberger,
S. K. Solanki,
A. Moreno Vacas,
D. Orozco Suárez,
N. Albelo Jorge,
T. Appourchaux,
A. Alvarez-Herrero,
J. Blanco Rodríguez,
A. Gandorfer,
P. Gutierrez-Marques,
F. Kahil,
M. Kolleck,
R. Volkmer,
J. C. del Toro Iniesta,
J. Woch,
B. Fiethe,
I. Pérez-Grande,
E. Sanchis Kilders,
M. Balaguer Jiménez,
L. R. Bellot Rubio,
D. Calchetti,
M. Carmona,
A. Feller
, et al. (21 additional authors not shown)
Abstract:
The brightness of faculae and network depends on the angle at which they are observed and the magnetic flux density. Close to the limb, assessment of this relationship has until now been hindered by the increasingly lower signal in magnetograms. This preliminary study aims at highlighting the potential of using simultaneous observations from different vantage points to better determine the propert…
▽ More
The brightness of faculae and network depends on the angle at which they are observed and the magnetic flux density. Close to the limb, assessment of this relationship has until now been hindered by the increasingly lower signal in magnetograms. This preliminary study aims at highlighting the potential of using simultaneous observations from different vantage points to better determine the properties of faculae close to the limb. We use data from the Solar Orbiter/Polarimetric and Helioseismic Imager (SO/PHI), and the Solar Dynamics Observatory/Helioseismic and Magnetic Imager (SDO/HMI), recorded at $\sim60^\circ$ angular separation of their lines of sight at the Sun. We use continuum intensity observed close to the limb by SO/PHI and complement it with the co-observed $B_{\rm LOS}$ from SDO/HMI, originating closer to disc centre (as seen by SDO/HMI), thus avoiding the degradation of the magnetic field signal near the limb. We derived the dependence of facular brightness in the continuum on disc position and magnetic flux density from the combined observations of SO/PHI and SDO/HMI. Compared with a single point of view, we were able to obtain contrast values reaching closer to the limb and to lower field strengths. We find the general dependence of the limb distance at which the contrast is maximum on the flux density to be at large in line with single viewpoint observations, in that the higher the flux density is, the closer the turning point lies to the limb. There is a tendency, however, for the maximum to be reached closer to the limb when determined from two vantage points. We note that due to the preliminary nature of this study, these results must be taken with caution. Our analysis shows that studies involving two viewpoints can significantly improve the detection of faculae near the solar limb and the determination of their brightness contrast relative to the quiet Sun.
△ Less
Submitted 4 September, 2023;
originally announced September 2023.
-
Direct assessment of SDO/HMI helioseismology of active regions on the Sun's far side using SO/PHI magnetograms
Authors:
D. Yang,
L. Gizon,
H. Barucq,
J. Hirzberger,
D. Orozco Suárez,
K. Albert,
N. Albelo Jorge,
T. Appourchaux,
A. Alvarez-Herrero,
J. Blanco Rodríguez,
A. Gandorfer,
D. Germerott,
L. Guerrero,
P. Gutierrez-Marques,
F. Kahil,
M. Kolleck,
S. K. Solanki,
J. C. del Toro Iniesta,
R. Volkmer,
J. Woch,
I. Pérez-Grande,
E. Sanchis Kilders,
M. Balaguer Jiménez,
L. R. Bellot Rubio,
D. Calchetti
, et al. (25 additional authors not shown)
Abstract:
Earth-side observations of solar p modes can be used to image and monitor magnetic activity on the Sun's far side. Here we use magnetograms of the far side obtained by the Polarimetric and Helioseismic Imager (PHI) onboard Solar Orbiter (SO) to directly assess -- for the first time -- the validity of far-side helioseismic holography. We wish to co-locate the positions of active regions in heliosei…
▽ More
Earth-side observations of solar p modes can be used to image and monitor magnetic activity on the Sun's far side. Here we use magnetograms of the far side obtained by the Polarimetric and Helioseismic Imager (PHI) onboard Solar Orbiter (SO) to directly assess -- for the first time -- the validity of far-side helioseismic holography. We wish to co-locate the positions of active regions in helioseismic images and magnetograms, and to calibrate the helioseismic measurements in terms of magnetic field strength. We identify three magnetograms on 18 November 2020, 3 October 2021, and 3 February 2022 displaying a total of six active regions on the far side. The first two dates are from SO's cruise phase, the third from the beginning of the nominal operation phase. We compute contemporaneous seismic phase maps for these three dates using helioseismic holography applied to time series of Dopplergrams from the Helioseismic and Magnetic Imager (HMI) on the Solar Dynamics Observatory (SDO). Among the six active regions seen in SO/PHI magnetograms, five active regions are identified on the seismic maps at almost the same positions as on the magnetograms. One region is too weak to be detected above the seismic noise. To calibrate the seismic maps, we fit a linear relationship between the seismic phase shifts and the unsigned line-of-sight magnetic field averaged over the active region areas extracted from the SO/PHI magnetograms. SO/PHI provides the strongest evidence so far that helioseismic imaging provides reliable information about active regions on the far side, including their positions, areas, and mean unsigned magnetic field.
△ Less
Submitted 2 May, 2023;
originally announced May 2023.
-
The on-ground data reduction and calibration pipeline for SO/PHI-HRT
Authors:
J. Sinjan,
D. Calchetti,
J. Hirzberger,
D. Orozco Suárez,
K. Albert,
N. Albelo Jorge,
T. Appourchaux,
A. Alvarez-Herrero,
J. Blanco Rodríguez,
A. Gandorfer,
D. Germerott,
L. Guerrero,
P. Gutierrez Marquez,
F. Kahil,
M. Kolleck,
S. K. Solanki,
J. C. del Toro Iniesta,
R. Volkmer,
J. Woch,
B. Fiethe,
J. M. Gómez Cama,
I. Pérez-Grande,
E. Sanchis Kilders,
M. Balaguer Jiménez,
L. R. Bellot Rubio
, et al. (25 additional authors not shown)
Abstract:
The ESA/NASA Solar Orbiter space mission has been successfully launched in February 2020. Onboard is the Polarimetric and Helioseismic Imager (SO/PHI), which has two telescopes, a High Resolution Telescope (HRT) and the Full Disc Telescope (FDT). The instrument is designed to infer the photospheric magnetic field and line-of-sight velocity through differential imaging of the polarised light emitte…
▽ More
The ESA/NASA Solar Orbiter space mission has been successfully launched in February 2020. Onboard is the Polarimetric and Helioseismic Imager (SO/PHI), which has two telescopes, a High Resolution Telescope (HRT) and the Full Disc Telescope (FDT). The instrument is designed to infer the photospheric magnetic field and line-of-sight velocity through differential imaging of the polarised light emitted by the Sun. It calculates the full Stokes vector at 6 wavelength positions at the Fe I 617.3 nm absorption line. Due to telemetry constraints, the instrument nominally processes these Stokes profiles onboard, however when telemetry is available, the raw images are downlinked and reduced on ground. Here the architecture of the on-ground pipeline for HRT is presented, which also offers additional corrections not currently available on board the instrument. The pipeline can reduce raw images to the full Stokes vector with a polarimetric sensitivity of $10^{-3}\cdot I_{c}$ or better.
△ Less
Submitted 31 August, 2022;
originally announced August 2022.
-
The magnetic drivers of campfires seen by the Polarimetric and Helioseismic Imager (PHI) on Solar Orbiter
Authors:
F. Kahil,
J. Hirzberger,
S. K. Solanki,
L. P. Chitta,
H. Peter,
F. Auchère,
J. Sinjan,
D. Orozco Suárez,
K. Albert,
N. Albelo Jorge,
T. Appourchaux,
A. Alvarez-Herrero,
J. Blanco Rodríguez,
A. Gandorfer,
D. Germerott,
L. Guerrero,
P. Gutiérrez Márquez,
M. Kolleck,
J. C. del Toro Iniesta,
R. Volkmer,
J. Woch,
B. Fiethe,
J. M. Gómez Cama,
I. Pérez-Grande,
E. Sanchis Kilders
, et al. (34 additional authors not shown)
Abstract:
The Extreme Ultraviolet Imager (EUI) on board the Solar Orbiter (SO) spacecraft observed small extreme ultraviolet (EUV) bursts, termed campfires, that have been proposed to be brightenings near the apexes of low-lying loops in the quiet-Sun atmosphere. The underlying magnetic processes driving these campfires are not understood. During the cruise phase of SO and at a distance of 0.523\,AU from th…
▽ More
The Extreme Ultraviolet Imager (EUI) on board the Solar Orbiter (SO) spacecraft observed small extreme ultraviolet (EUV) bursts, termed campfires, that have been proposed to be brightenings near the apexes of low-lying loops in the quiet-Sun atmosphere. The underlying magnetic processes driving these campfires are not understood. During the cruise phase of SO and at a distance of 0.523\,AU from the Sun, the Polarimetric and Helioseismic Imager on Solar Orbiter (SO/PHI) observed a quiet-Sun region jointly with SO/EUI, offering the possibility to investigate the surface magnetic field dynamics underlying campfires at a spatial resolution of about 380~km.
In 71\% of the 38 isolated events, campfires are confined between bipolar magnetic features, which seem to exhibit signatures of magnetic flux cancellation. The flux cancellation occurs either between the two main footpoints, or between one of the footpoints of the loop housing the campfire and a nearby opposite polarity patch. In one particularly clear-cut case, we detected the emergence of a small-scale magnetic loop in the internetwork followed soon afterwards by a campfire brightening adjacent to the location of the linear polarisation signal in the photosphere, that is to say near where the apex of the emerging loop lays. The rest of the events were observed over small scattered magnetic features, which could not be identified as magnetic footpoints of the campfire hosting loops. The majority of campfires could be driven by magnetic reconnection triggered at the footpoints, similar to the physical processes occurring in the burst-like EUV events discussed in the literature. About a quarter of all analysed campfires, however, are not associated to such magnetic activity in the photosphere, which implies that other heating mechanisms are energising these small-scale EUV brightenings.
△ Less
Submitted 28 February, 2022;
originally announced February 2022.
-
Laboratory Measurements of Instrumental Signatures of the LSST Camera Focal Plane
Authors:
Adam Snyder,
Aurelien Barrau,
Andrew Bradshaw,
Boyd Bowdish,
James Chiang,
Celine Combet,
Seth Digel,
Richard Dubois,
Ludovic Eraud,
Claire Juramy,
Craig Lage,
Travis Lange,
Myriam Migliore,
Andrei Nomerotski,
Paul O'Connor,
HyeYun Park,
Andrew Rasmussen,
Kevin Reil,
Aaron Roodman,
Adrian Shestakov,
Yousuke Utsumi,
Duncan Wood
Abstract:
Electro-optical testing and characterization of the Vera C. Rubin Observatory Legacy Survey of Space and Time (LSST) Camera focal plane, consisting of 205 charge-coupled devices (CCDs) arranged into 21 stand-alone Raft Tower Modules (RTMs) and 4 Corner Raft Tower Modules (CRTMs), is currently being performed at the SLAC National Accelerator Laboratory. Testing of the camera sensors is performed us…
▽ More
Electro-optical testing and characterization of the Vera C. Rubin Observatory Legacy Survey of Space and Time (LSST) Camera focal plane, consisting of 205 charge-coupled devices (CCDs) arranged into 21 stand-alone Raft Tower Modules (RTMs) and 4 Corner Raft Tower Modules (CRTMs), is currently being performed at the SLAC National Accelerator Laboratory. Testing of the camera sensors is performed using a set of custom-built optical projectors, designed to illuminate the full focal plane or specific regions of the focal plane with a series of light illumination patterns: the crosstalk projector, the flat illuminator projector, and the spot grid projector. In addition to measurements of crosstalk, linearity and full well, the ability to project realistically-sized sources, using the spot grid projector, makes possible unique measurements of instrumental signatures such as deferred charge distortions, astrometric shifts due to sensor effects, and the brighter-fatter effect, prior to camera first light. Here we present the optical projector designs and usage, the electro-optical measurements and how these results have been used in testing and improving the LSST Camera instrumental signature removal algorithms.
△ Less
Submitted 4 January, 2021;
originally announced January 2021.
-
Performance analysis of the SO/PHI software framework for on-board data reduction
Authors:
K. Albert,
J. Hirzberger,
D. Busse,
J. Blanco Rodríguez,
J. S. Castellanos Durán,
J. P. Cobos Carrascosa,
B. Fiethe,
A. Gandorfer,
Y. Guan,
M. Kolleck,
A. Lagg,
T. Lange,
H. Michalik,
S. K. Solanki,
J. C. del Toro Iniesta,
J. Woch
Abstract:
The Polarimetric and Helioseismic Imager (PHI) is the first deep-space solar spectropolarimeter, on-board the Solar Orbiter (SO) space mission. It faces: stringent requirements on science data accuracy, a dynamic environment, and severe limitations on telemetry volume. SO/PHI overcomes these restrictions through on-board instrument calibration and science data reduction, using dedicated firmware i…
▽ More
The Polarimetric and Helioseismic Imager (PHI) is the first deep-space solar spectropolarimeter, on-board the Solar Orbiter (SO) space mission. It faces: stringent requirements on science data accuracy, a dynamic environment, and severe limitations on telemetry volume. SO/PHI overcomes these restrictions through on-board instrument calibration and science data reduction, using dedicated firmware in FPGAs. This contribution analyses the accuracy of a data processing pipeline by comparing the results obtained with SO/PHI hardware to a reference from a ground computer. The results show that for the analysed pipeline the error introduced by the firmware implementation is well below the requirements of SO/PHI.
△ Less
Submitted 21 May, 2019;
originally announced May 2019.
-
The Polarimetric and Helioseismic Imager on Solar Orbiter
Authors:
S. K. Solanki,
J. C. del Toro Iniesta,
J. Woch,
A. Gandorfer,
J. Hirzberger,
A. Alvarez-Herrero,
T. Appourchaux,
V. Martínez Pillet,
I. Pérez-Grande,
E. Sanchis Kilders,
W. Schmidt,
J. M. Gómez Cama,
H. Michalik,
W. Deutsch,
G. Fernandez-Rico,
B. Grauf,
L. Gizon,
K. Heerlein,
M. Kolleck,
A. Lagg,
R. Meller,
R. Müller,
U. Schühle,
J. Staub,
K. Albert
, et al. (99 additional authors not shown)
Abstract:
This paper describes the Polarimetric and Helioseismic Imager on the Solar Orbiter mission (SO/PHI), the first magnetograph and helioseismology instrument to observe the Sun from outside the Sun-Earth line. It is the key instrument meant to address the top-level science question: How does the solar dynamo work and drive connections between the Sun and the heliosphere? SO/PHI will also play an impo…
▽ More
This paper describes the Polarimetric and Helioseismic Imager on the Solar Orbiter mission (SO/PHI), the first magnetograph and helioseismology instrument to observe the Sun from outside the Sun-Earth line. It is the key instrument meant to address the top-level science question: How does the solar dynamo work and drive connections between the Sun and the heliosphere? SO/PHI will also play an important role in answering the other top-level science questions of Solar Orbiter, as well as hosting the potential of a rich return in further science.
SO/PHI measures the Zeeman effect and the Doppler shift in the FeI 617.3nm spectral line. To this end, the instrument carries out narrow-band imaging spectro-polarimetry using a tunable LiNbO_3 Fabry-Perot etalon, while the polarisation modulation is done with liquid crystal variable retarders (LCVRs). The line and the nearby continuum are sampled at six wavelength points and the data are recorded by a 2kx2k CMOS detector. To save valuable telemetry, the raw data are reduced on board, including being inverted under the assumption of a Milne-Eddington atmosphere, although simpler reduction methods are also available on board. SO/PHI is composed of two telescopes; one, the Full Disc Telescope (FDT), covers the full solar disc at all phases of the orbit, while the other, the High Resolution Telescope (HRT), can resolve structures as small as 200km on the Sun at closest perihelion. The high heat load generated through proximity to the Sun is greatly reduced by the multilayer-coated entrance windows to the two telescopes that allow less than 4% of the total sunlight to enter the instrument, most of it in a narrow wavelength band around the chosen spectral line.
△ Less
Submitted 26 March, 2019;
originally announced March 2019.
-
Autonomous on-board data processing and instrument calibration software for the SO/PHI
Authors:
K. Albert,
J. Hirzberger,
D. Busse,
T. Lange,
M. Kolleck,
B. Fiethe,
D. Orozco Suárez,
J. Woch,
J. Schou,
J. Blanco Rodríguez,
A. Gandorfer,
Y. Guan,
J. P. Cobos Carrascosa,
D. Hernández Expósito,
J. C. del Toro Iniesta,
S. K. Solanki,
H. Michalik
Abstract:
The extension of on-board data processing capabilities is an attractive option to reduce telemetry for scientific instruments on deep space missions. The challenges that this presents, however, require a comprehensive software system, which operates on the limited resources a data processing unit in space allows.
We implemented such a system for the Polarimetric and Helioseismic Imager (PHI) on-bo…
▽ More
The extension of on-board data processing capabilities is an attractive option to reduce telemetry for scientific instruments on deep space missions. The challenges that this presents, however, require a comprehensive software system, which operates on the limited resources a data processing unit in space allows.
We implemented such a system for the Polarimetric and Helioseismic Imager (PHI) on-board the Solar Orbiter (SO) spacecraft. It ensures autonomous operation to handle long command-response times, easy changing of the processes after new lessons have been learned and meticulous book-keeping of all operations to ensure scientific accuracy. This contribution presents the requirements and main aspects of the software implementation, followed by an example of a task implemented in the software frame, and results from running it on SO/PHI.
The presented example shows that the different parts of the software framework work well together, and that the system processes data as we expect. The flexibility of the framework makes it possible to use it as a baseline for future applications with similar needs and limitations as SO/PHI.
△ Less
Submitted 8 October, 2018;
originally announced October 2018.
-
LSST: from Science Drivers to Reference Design and Anticipated Data Products
Authors:
Željko Ivezić,
Steven M. Kahn,
J. Anthony Tyson,
Bob Abel,
Emily Acosta,
Robyn Allsman,
David Alonso,
Yusra AlSayyad,
Scott F. Anderson,
John Andrew,
James Roger P. Angel,
George Z. Angeli,
Reza Ansari,
Pierre Antilogus,
Constanza Araujo,
Robert Armstrong,
Kirk T. Arndt,
Pierre Astier,
Éric Aubourg,
Nicole Auza,
Tim S. Axelrod,
Deborah J. Bard,
Jeff D. Barr,
Aurelian Barrau,
James G. Bartlett
, et al. (288 additional authors not shown)
Abstract:
(Abridged) We describe here the most ambitious survey currently planned in the optical, the Large Synoptic Survey Telescope (LSST). A vast array of science will be enabled by a single wide-deep-fast sky survey, and LSST will have unique survey capability in the faint time domain. The LSST design is driven by four main science themes: probing dark energy and dark matter, taking an inventory of the…
▽ More
(Abridged) We describe here the most ambitious survey currently planned in the optical, the Large Synoptic Survey Telescope (LSST). A vast array of science will be enabled by a single wide-deep-fast sky survey, and LSST will have unique survey capability in the faint time domain. The LSST design is driven by four main science themes: probing dark energy and dark matter, taking an inventory of the Solar System, exploring the transient optical sky, and mapping the Milky Way. LSST will be a wide-field ground-based system sited at Cerro Pachón in northern Chile. The telescope will have an 8.4 m (6.5 m effective) primary mirror, a 9.6 deg$^2$ field of view, and a 3.2 Gigapixel camera. The standard observing sequence will consist of pairs of 15-second exposures in a given field, with two such visits in each pointing in a given night. With these repeats, the LSST system is capable of imaging about 10,000 square degrees of sky in a single filter in three nights. The typical 5$σ$ point-source depth in a single visit in $r$ will be $\sim 24.5$ (AB). The project is in the construction phase and will begin regular survey operations by 2022. The survey area will be contained within 30,000 deg$^2$ with $δ<+34.5^\circ$, and will be imaged multiple times in six bands, $ugrizy$, covering the wavelength range 320--1050 nm. About 90\% of the observing time will be devoted to a deep-wide-fast survey mode which will uniformly observe a 18,000 deg$^2$ region about 800 times (summed over all six bands) during the anticipated 10 years of operations, and yield a coadded map to $r\sim27.5$. The remaining 10\% of the observing time will be allocated to projects such as a Very Deep and Fast time domain survey. The goal is to make LSST data products, including a relational database of about 32 trillion observations of 40 billion objects, available to the public and scientists around the world.
△ Less
Submitted 23 May, 2018; v1 submitted 15 May, 2008;
originally announced May 2008.
