-
The MIRI/MRS Library I. Empirically correcting detector charge migration in unresolved sources
Authors:
Danny Gasman,
Ioannis Argyriou,
Jane E. Morrison,
David R. Law,
Alistair Glasse,
Karl D. Gordon,
Patrick J. Kavanagh,
Craig Lage,
Polychronis Patapis,
G. C. Sloan
Abstract:
The JWST has been collecting scientific data for over two years now. Scientists are now looking deeper into the data, which introduces the need to correct known systematic effects. Important limiting factors for the MIRI/MRS are the pointing accuracy, non-linearity, detector charge migration, detector scattering, the accuracy of the PSF model, and the complex interplay between these. The Cycle 2 p…
▽ More
The JWST has been collecting scientific data for over two years now. Scientists are now looking deeper into the data, which introduces the need to correct known systematic effects. Important limiting factors for the MIRI/MRS are the pointing accuracy, non-linearity, detector charge migration, detector scattering, the accuracy of the PSF model, and the complex interplay between these. The Cycle 2 programme 3779 proposed a 72-point intra-pixel dither raster of the calibration star 10-Lac. In this first work of the paper series, we aim to address the degeneracy between the non-linearity and BFE that affect the pixel voltage integration ramps of the MRS. Due to the low flux in the longer wavelengths, we only do this in the 4.9 to 11.7 micron region. We fitted the ramps per pixel and dither, in order to fold in the deviations from classical non-linearity that are caused by charge migration. The ramp shapes should be repeatable depending on the part of the PSF that is sampled. By doing so, we defined both a grid-based linearity correction, and an interpolated linearity correction. We find significant improvements compared to the uniform illumination assumption. The standard deviation on the pixel ramp residual non-linearity is between 70-90% smaller than the current standard pipeline when self-calibrating with the grid. We are able to interpolate these coefficients to apply to any unresolved source not on the grid points, resulting in an up to 70% smaller standard deviation on the residual deviation from linearity. The FWHM is up to 20% narrower. The depth of the fringes is now consistent up the ramp. Pointing-specific linearity corrections allow us to fix the systematic deviation in the slopes. We demonstrated this for unresolved sources. The discovered trends with PSF sampling suggest that, we may be able to model ramps for spatially extended and resolved illumination as well.
△ Less
Submitted 16 June, 2024;
originally announced June 2024.
-
Mitigation of the Brighter-Fatter Effect in the LSST Camera
Authors:
Alex Broughton,
Yousuke Utsumi,
Andrés Plazas Malagón,
Christopher Waters,
Craig Lage,
Adam Snyder,
Andrew Rasmussen,
Stuart Marshall,
Jim Chiang,
Simona Murgia,
Aaron Roodman
Abstract:
Thick, fully depleted charge-coupled devices (CCDs) are known to exhibit non-linear behavior at high signal levels due to the dynamic behavior of charges collecting in the potential wells of pixels, called the brighter-fatter effect (BFE). This particularly impacts bright calibration stars, which appear larger than their intrinsic shape, creating a flux-dependent point-spread function (PSF) that i…
▽ More
Thick, fully depleted charge-coupled devices (CCDs) are known to exhibit non-linear behavior at high signal levels due to the dynamic behavior of charges collecting in the potential wells of pixels, called the brighter-fatter effect (BFE). This particularly impacts bright calibration stars, which appear larger than their intrinsic shape, creating a flux-dependent point-spread function (PSF) that if left unmitigated, could make up a large fraction of the error budget in Stage IV weak-lensing (WL) surveys such as the Legacy Survey of Space and Time (LSST). In this paper, we analyze image measurements of flat fields and artificial stars taken at different illumination levels with the LSST Camera (LSSTCam) at SLAC National Accelerator Laboratory in order to quantify this effect in the LSST Camera before and after a previously introduced correction technique. We observe that the BFE evolves anisotropically as a function of flux due to higher-order BFEs, which violates the fundamental assumption of this correction method. We then introduce a new sampling method based on a physically motivated model to account these higher-order terms in the correction, and then we test the modified correction on both datasets. We find that the new method corrects the effect in flat fields better than it corrects the effect in artificial stars which we conclude is the result of a unmodeled curl component of the deflection field by the correction. We use these results to define a new metric for the full-well capacity of our sensors and advise image processing strategies to further limit the impact of the effect on LSST WL science pathways.
△ Less
Submitted 5 December, 2023;
originally announced December 2023.
-
The Brighter-Fatter Effect in the JWST MIRI Si:As IBC detectors I. Observations, impact on science, and modelling
Authors:
Ioannis Argyriou,
Craig Lage,
George H. Rieke,
Danny Gasman,
Jeroen Bouwman,
Jane Morrison,
Mattia Libralato,
Daniel Dicken,
Bernhard R. Brandl,
Javier Álvarez-Márquez,
Alvaro Labiano,
Michael Regan,
Michael E. Ressler
Abstract:
The Mid-Infrared Instrument (MIRI) on board the James Webb Space Telescope (JWST) uses three Si:As impurity band conduction (IBC) detector arrays. The output voltage level of each MIRI detector pixel is digitally recorded by sampling-up-the-ramp. For uniform or low-contrast illumination, the pixel ramps become non-linear in a predictable way, but in areas of high contrast, the non-linearity curve…
▽ More
The Mid-Infrared Instrument (MIRI) on board the James Webb Space Telescope (JWST) uses three Si:As impurity band conduction (IBC) detector arrays. The output voltage level of each MIRI detector pixel is digitally recorded by sampling-up-the-ramp. For uniform or low-contrast illumination, the pixel ramps become non-linear in a predictable way, but in areas of high contrast, the non-linearity curve becomes much more complex. The origin of the effect is poorly understood and currently not calibrated. We provide observational evidence of the Brighter-Fatter Effect (BFE) in MIRI conventional and high-contrast coronographic imaging, low-resolution spectroscopy, and medium-resolution spectroscopy data and investigate the physical mechanism that gives rise to the effect on the MIRI detector pixel raw voltage integration ramps. We use public data from the JWST MIRI commissioning and Cycle 1 phase. We also develop a numerical electrostatic model of the MIRI detectors using a modified version of the public Poisson_CCD code. We find that the physical mechanism behind the BFE manifesting in MIRI data is fundamentally different to that of CCDs and photodiode arrays such as the Hawaii-XRG (HXRG) near-infrared detectors used by the NIRISS, NIRCam, and NIRSpec instruments on board JWST. Observationally, the BFE makes the JWST MIRI data yield 10-25 % larger point sources and spectral line profiles as a function of the relative level of debiasing of neighboring detector pixels. This broadening impacts the MIRI absolute flux calibration, time-series observations of faint companions, and PSF modeling and subtraction. We also find that the intra-pixel 2D profile of the shrinking Si:As IBC detector depletion region directly impacts the accuracy of the pixel ramp non-linearity calibration model.
△ Less
Submitted 12 October, 2023; v1 submitted 23 March, 2023;
originally announced March 2023.
-
Fringing Analysis and Simulation for the Vera C. Rubin Observatory's Legacy Survey of Space and Time
Authors:
Zhiyuan Guo,
Chris W. Walter,
Craig Lage,
Robert H. Lupton,
The LSST Dark Energy Science Collaboration
Abstract:
The presence of fringing in astronomical CCD images will impact photometric quality and measurements. Yet its impact on the Vera C. Rubin Observatory's Legacy Survey of Space and Time (LSST) has not been fully studied. We present a detailed study on fringing for Charge-Coupled Devices (CCDs) already implemented on the Rubin Observatory LSST Camera's focal plane. After making physical measurements…
▽ More
The presence of fringing in astronomical CCD images will impact photometric quality and measurements. Yet its impact on the Vera C. Rubin Observatory's Legacy Survey of Space and Time (LSST) has not been fully studied. We present a detailed study on fringing for Charge-Coupled Devices (CCDs) already implemented on the Rubin Observatory LSST Camera's focal plane. After making physical measurements and knowing the compositions, we have developed a model for the e2v CCDs. We present a method to fit for the internal height variation of the epoxy layer within the sensors based on fringing measurements in a laboratory setting. This method is generic enough that it can be easily modified to work for other CCDs. Using the derived fringing model, we successfully reproduce comparable fringing amplitudes that match the observed levels in images taken by existing telescopes with different optical designs. This model is then used to forecast the expected level of fringing in a single LSST y-band sky background exposure with Rubin telescope optics in the presence of a realistic time varying sky spectrum. The predicted fringing amplitude in LSST images ranges from $0.04\%$ to $0.2\%$ depending on the location of a CCD on the focal plane. We find that the predicted variation in surface brightness caused by fringing in LSST y-band skybackground images is about $0.6\ μ\rm{Jy}\ \rm{arcsec}^{-2}$, which is 40 times larger than the current measurement error. We conclude that it is necessary to include fringing correction in the Rubin's LSST image processing pipeline.
△ Less
Submitted 16 November, 2022;
originally announced November 2022.
-
Understanding the effects of charge diffusion in next-generation soft X-ray imagers
Authors:
Eric D. Miller,
Gregory Y. Prigozhin,
Beverly J. LaMarr,
Marshall W. Bautz,
Richard F. Foster,
Catherine E. Grant,
Craig S. Lage,
Christopher Leitz,
Andrew Malonis
Abstract:
To take advantage of high-resolution optics sensitive to a broad energy range, future X-ray imaging instruments will require thick detectors with small pixels. This pixel aspect ratio affects spectral response in the soft X-ray band, vital for many science goals, as charge produced by the photon interaction near the entrance window diffuses across multiple pixels by the time it is collected, and i…
▽ More
To take advantage of high-resolution optics sensitive to a broad energy range, future X-ray imaging instruments will require thick detectors with small pixels. This pixel aspect ratio affects spectral response in the soft X-ray band, vital for many science goals, as charge produced by the photon interaction near the entrance window diffuses across multiple pixels by the time it is collected, and is potentially lost below the imposed noise threshold. In an effort to understand these subtle but significant effects and inform the design and requirements of future detectors, we present simulations of charge diffusion using a variety of detector characteristics and operational settings, assessing spectral response at a range of X-ray energies. We validate the simulations by comparing the performance to that of real CCD detectors tested in the lab and deployed in space, spanning a range of thickness, pixel size, and other characteristics. The simulations show that while larger pixels, higher bias voltage, and optimal backside passivation improve performance, reducing the readout noise has a dominant effect in all cases. We finally show how high-pixel-aspect-ratio devices present challenges for measuring the backside passivation performance due to the magnitude of other processes that degrade spectral response, and present a method for utilizing the simulations to qualitatively assess this performance. Since compelling science requirements often compete technically with each other (high spatial resolution, soft X-ray response, hard X-ray response), these results can be used to find the proper balance for a future high-spatial-resolution X-ray instrument.
△ Less
Submitted 15 August, 2022;
originally announced August 2022.
-
DESC DC2 Data Release Note
Authors:
LSST Dark Energy Science Collaboration,
Bela Abolfathi,
Robert Armstrong,
Humna Awan,
Yadu N. Babuji,
Franz Erik Bauer,
George Beckett,
Rahul Biswas,
Joanne R. Bogart,
Dominique Boutigny,
Kyle Chard,
James Chiang,
Johann Cohen-Tanugi,
Andrew J. Connolly,
Scott F. Daniel,
Seth W. Digel,
Alex Drlica-Wagner,
Richard Dubois,
Eric Gawiser,
Thomas Glanzman,
Salman Habib,
Andrew P. Hearin,
Katrin Heitmann,
Fabio Hernandez,
Renée Hložek
, et al. (32 additional authors not shown)
Abstract:
In preparation for cosmological analyses of the Vera C. Rubin Observatory Legacy Survey of Space and Time (LSST), the LSST Dark Energy Science Collaboration (LSST DESC) has created a 300 deg$^2$ simulated survey as part of an effort called Data Challenge 2 (DC2). The DC2 simulated sky survey, in six optical bands with observations following a reference LSST observing cadence, was processed with th…
▽ More
In preparation for cosmological analyses of the Vera C. Rubin Observatory Legacy Survey of Space and Time (LSST), the LSST Dark Energy Science Collaboration (LSST DESC) has created a 300 deg$^2$ simulated survey as part of an effort called Data Challenge 2 (DC2). The DC2 simulated sky survey, in six optical bands with observations following a reference LSST observing cadence, was processed with the LSST Science Pipelines (19.0.0). In this Note, we describe the public data release of the resulting object catalogs for the coadded images of five years of simulated observations along with associated truth catalogs. We include a brief description of the major features of the available data sets. To enable convenient access to the data products, we have developed a web portal connected to Globus data services. We describe how to access the data and provide example Jupyter Notebooks in Python to aid first interactions with the data. We welcome feedback and questions about the data release via a GitHub repository.
△ Less
Submitted 13 June, 2022; v1 submitted 12 January, 2021;
originally announced January 2021.
-
Laboratory Measurements of Instrumental Signatures of the LSST Camera Focal Plane
Authors:
Adam Snyder,
Aurelien Barrau,
Andrew Bradshaw,
Boyd Bowdish,
James Chiang,
Celine Combet,
Seth Digel,
Richard Dubois,
Ludovic Eraud,
Claire Juramy,
Craig Lage,
Travis Lange,
Myriam Migliore,
Andrei Nomerotski,
Paul O'Connor,
HyeYun Park,
Andrew Rasmussen,
Kevin Reil,
Aaron Roodman,
Adrian Shestakov,
Yousuke Utsumi,
Duncan Wood
Abstract:
Electro-optical testing and characterization of the Vera C. Rubin Observatory Legacy Survey of Space and Time (LSST) Camera focal plane, consisting of 205 charge-coupled devices (CCDs) arranged into 21 stand-alone Raft Tower Modules (RTMs) and 4 Corner Raft Tower Modules (CRTMs), is currently being performed at the SLAC National Accelerator Laboratory. Testing of the camera sensors is performed us…
▽ More
Electro-optical testing and characterization of the Vera C. Rubin Observatory Legacy Survey of Space and Time (LSST) Camera focal plane, consisting of 205 charge-coupled devices (CCDs) arranged into 21 stand-alone Raft Tower Modules (RTMs) and 4 Corner Raft Tower Modules (CRTMs), is currently being performed at the SLAC National Accelerator Laboratory. Testing of the camera sensors is performed using a set of custom-built optical projectors, designed to illuminate the full focal plane or specific regions of the focal plane with a series of light illumination patterns: the crosstalk projector, the flat illuminator projector, and the spot grid projector. In addition to measurements of crosstalk, linearity and full well, the ability to project realistically-sized sources, using the spot grid projector, makes possible unique measurements of instrumental signatures such as deferred charge distortions, astrometric shifts due to sensor effects, and the brighter-fatter effect, prior to camera first light. Here we present the optical projector designs and usage, the electro-optical measurements and how these results have been used in testing and improving the LSST Camera instrumental signature removal algorithms.
△ Less
Submitted 4 January, 2021;
originally announced January 2021.
-
The LSST DESC DC2 Simulated Sky Survey
Authors:
LSST Dark Energy Science Collaboration,
Bela Abolfathi,
David Alonso,
Robert Armstrong,
Éric Aubourg,
Humna Awan,
Yadu N. Babuji,
Franz Erik Bauer,
Rachel Bean,
George Beckett,
Rahul Biswas,
Joanne R. Bogart,
Dominique Boutigny,
Kyle Chard,
James Chiang,
Chuck F. Claver,
Johann Cohen-Tanugi,
Céline Combet,
Andrew J. Connolly,
Scott F. Daniel,
Seth W. Digel,
Alex Drlica-Wagner,
Richard Dubois,
Emmanuel Gangler,
Eric Gawiser
, et al. (55 additional authors not shown)
Abstract:
We describe the simulated sky survey underlying the second data challenge (DC2) carried out in preparation for analysis of the Vera C. Rubin Observatory Legacy Survey of Space and Time (LSST) by the LSST Dark Energy Science Collaboration (LSST DESC). Significant connections across multiple science domains will be a hallmark of LSST; the DC2 program represents a unique modeling effort that stresses…
▽ More
We describe the simulated sky survey underlying the second data challenge (DC2) carried out in preparation for analysis of the Vera C. Rubin Observatory Legacy Survey of Space and Time (LSST) by the LSST Dark Energy Science Collaboration (LSST DESC). Significant connections across multiple science domains will be a hallmark of LSST; the DC2 program represents a unique modeling effort that stresses this interconnectivity in a way that has not been attempted before. This effort encompasses a full end-to-end approach: starting from a large N-body simulation, through setting up LSST-like observations including realistic cadences, through image simulations, and finally processing with Rubin's LSST Science Pipelines. This last step ensures that we generate data products resembling those to be delivered by the Rubin Observatory as closely as is currently possible. The simulated DC2 sky survey covers six optical bands in a wide-fast-deep (WFD) area of approximately 300 deg^2 as well as a deep drilling field (DDF) of approximately 1 deg^2. We simulate 5 years of the planned 10-year survey. The DC2 sky survey has multiple purposes. First, the LSST DESC working groups can use the dataset to develop a range of DESC analysis pipelines to prepare for the advent of actual data. Second, it serves as a realistic testbed for the image processing software under development for LSST by the Rubin Observatory. In particular, simulated data provide a controlled way to investigate certain image-level systematic effects. Finally, the DC2 sky survey enables the exploration of new scientific ideas in both static and time-domain cosmology.
△ Less
Submitted 26 January, 2021; v1 submitted 12 October, 2020;
originally announced October 2020.
-
Physical and electrical analysis of LSST sensors
Authors:
Craig Lage
Abstract:
Removing systematic effects from astronomical images taken with CCDs requires a detailed understanding of the physics of the imaging process. To aid in this understanding, we have built detailed electrostatic simulations of the LSST CCDs. In order to build an electrostatic model of the LSST CCDs, physical information about the CCDs is required. These details include things such as the physical dim…
▽ More
Removing systematic effects from astronomical images taken with CCDs requires a detailed understanding of the physics of the imaging process. To aid in this understanding, we have built detailed electrostatic simulations of the LSST CCDs. In order to build an electrostatic model of the LSST CCDs, physical information about the CCDs is required. These details include things such as the physical dimensions of the components of the CCD, dopant profiles, and in some cases, electrical measurements of the CCD. This work documents the results of these physical and electrical measurements on LSST CCDs.
△ Less
Submitted 21 November, 2019;
originally announced November 2019.
-
Linearity and correction of the BF effect in LSST sensors
Authors:
Craig Lage
Abstract:
The Brighter-Fatter (hereafter BF) effect in CCD sensors causes increases in the image size of bright objects due to electrostatic repulsion of collected charges. Correcting this effect in the LSST camera is required in order to meet the science goals of the project, especially galaxy shape measurements for weak lensing. The current plan for BF image correction in the LSST is to use the deconvolut…
▽ More
The Brighter-Fatter (hereafter BF) effect in CCD sensors causes increases in the image size of bright objects due to electrostatic repulsion of collected charges. Correcting this effect in the LSST camera is required in order to meet the science goals of the project, especially galaxy shape measurements for weak lensing. The current plan for BF image correction in the LSST is to use the deconvolution method described in Coulton, et.al. [1]. In this work, we study the linearity of the BF effect and effectiveness of the Coulton correction, using both simulation tools and measurements made on prototype LSST CCDs from both CCD vendors. We conclude that the proposed image correction method may be adequate to meet the LSST science goals, although more work is needed on the algorithms used to generate the image correction kernel from sensor measurements.
△ Less
Submitted 21 November, 2019;
originally announced November 2019.
-
Poisson_CCD: A dedicated simulator for modeling CCDs
Authors:
Craig Lage,
Andrew K. Bradshaw,
J. Anthony Tyson
Abstract:
A dedicated simulator, Poisson_CCD, has been constructed which models astronomical CCDs by solving Poisson's equation numerically and simulating charge transport within the CCD. The potentials and free carrier densities within the CCD are self-consistently solved for, giving realistic results for the charge distribution within the CCD storage wells. The simulator has been used to model the CCDs wh…
▽ More
A dedicated simulator, Poisson_CCD, has been constructed which models astronomical CCDs by solving Poisson's equation numerically and simulating charge transport within the CCD. The potentials and free carrier densities within the CCD are self-consistently solved for, giving realistic results for the charge distribution within the CCD storage wells. The simulator has been used to model the CCDs which are being used to construct the LSST digital camera. The simulator output has been validated by comparing its predictions with several different types of CCD measurements, including astrometric shifts, brighter-fatter induced pixel-pixel covariances, saturation effects, and diffusion spreading. The code is open source and freely available.
△ Less
Submitted 1 June, 2021; v1 submitted 20 November, 2019;
originally announced November 2019.
-
Characterization of LSST CCDs Using Realistic Images, Before First Light
Authors:
Andrew K. Bradshaw,
Craig Lage,
J. Anthony Tyson
Abstract:
The 3.2 gigapixel LSST camera, an array of 189 thick fully-depleted CCDs, will repeatedly image the southern sky and accomplish a wide variety of science goals. However, its trove of tens of billions of object images implies stringent requirements on systematic biases imprinted during shift-and-stare CCD observation. In order to correct for these biases which, without correction, violate requireme…
▽ More
The 3.2 gigapixel LSST camera, an array of 189 thick fully-depleted CCDs, will repeatedly image the southern sky and accomplish a wide variety of science goals. However, its trove of tens of billions of object images implies stringent requirements on systematic biases imprinted during shift-and-stare CCD observation. In order to correct for these biases which, without correction, violate requirements on weak lensing precision, we investigate CCD systematics using both simulations of charge transport as well as with a unique bench-top optical system matched to the LSST's fast f/1.2 beam. By illuminating single CCDs with realistic scenes of stars and galaxies and then analyzing these images with the LSST data management pipelines, we can characterize the survey's imaging performance well before the camera's first light. We present measurements of several CCD systematics under varying conditions in the laboratory, including the brightness-dependent broadening of star and galaxy images, charge transport anomalies in the silicon bulk as well as the edges, and serial deferred charge. Alongside these measurements, we also present the development and testing of physics-based models which inform corrections or mitigation strategies for these systematics. Optimization of the CCD survey operation under a variety of realistic observational conditions, including systematic effects from the optics, clocking, sky brightness, and image analysis, will be critical to achieve the LSST's goals of precision astronomy and cosmology.
△ Less
Submitted 1 August, 2018;
originally announced August 2018.
-
Measurements and Simulations of the Brighter-Fatter Effect in CCD Sensors
Authors:
Craig Lage,
Andrew Bradshaw,
J. Anthony Tyson
Abstract:
Reduction of images and science analysis from ground-based telescopes such as the LSST requires detailed knowledge of the PSF of the image, which includes components attributable to the instrument as well as components attributable to the atmosphere. Because the atmospheric component is constantly changing, the PSF is typically extracted from each image by measuring the size and shape of star imag…
▽ More
Reduction of images and science analysis from ground-based telescopes such as the LSST requires detailed knowledge of the PSF of the image, which includes components attributable to the instrument as well as components attributable to the atmosphere. Because the atmospheric component is constantly changing, the PSF is typically extracted from each image by measuring the size and shape of star images across the CCD, then building a fitting function over the focal plane which is used to model the PSF for analysis of extended sources such as galaxies. Since the stars in each CCD field have a range of brightnesses, accurate knowledge of the PSF for point sources of varying brightness is essential. It has been found that in thick, fully-depleted CCDs, the electrostatic repulsion of charge stored in the collecting wells gives rise to a larger and slightly more elliptical PSF for brighter stars. This "brighter-fatter" effect has been reported in some detail in the literature. In this work, we report direct and indirect measurements of this effect in prototype LSST sensors, and describe a detailed physics-based model of the electrostatics and charge transport within the CCD.
△ Less
Submitted 16 March, 2017;
originally announced March 2017.
-
High fidelity point-spread function retrieval in the presence of electrostatic, hysteretic pixel response
Authors:
Andrew Rasmussen,
Augustin Guyonnet,
Craig Lage,
Pierre Antilogus,
Pierre Astier,
Peter Doherty,
Kirk Gilmore,
Ivan Kotov,
Robert Lupton,
Andrei Nomerotski,
Paul O'Connor,
Christopher Stubbs,
Anthony Tyson,
Christopher Walter
Abstract:
We employ electrostatic conversion drift calculations to match CCD pixel signal covariances observed in flat field exposures acquired using candidate sensor devices for the LSST Camera. We thus constrain pixel geometry distortions present at the end of integration, based on signal images recorded. We use available data from several operational voltage parameter settings to validate our understandi…
▽ More
We employ electrostatic conversion drift calculations to match CCD pixel signal covariances observed in flat field exposures acquired using candidate sensor devices for the LSST Camera. We thus constrain pixel geometry distortions present at the end of integration, based on signal images recorded. We use available data from several operational voltage parameter settings to validate our understanding. Our primary goal is to optimize flux point-spread function (FPSF) estimation quantitatively, and thereby minimize sensor-induced errors which may limit performance in precision astronomy applications. We consider alternative compensation scenarios that will take maximum advantage of our understanding of this underlying mechanism in data processing pipelines currently under development.
To quantitatively capture the pixel response in high-contrast/high dynamic range operational extrema, we propose herein some straightforward laboratory tests that involve altering the time order of source illumination on sensors, within individual test exposures. Hence the word {\it hysteretic} in the title of this paper.
△ Less
Submitted 12 September, 2016; v1 submitted 5 August, 2016;
originally announced August 2016.
-
Mapping charge transport effects in thick CCDs with a dithered array of 40,000 stars
Authors:
Andrew Bradshaw,
Craig Lage,
Elodie Resseguie,
J. A. Tyson
Abstract:
We characterize the astrometric distortion at the edges of thick, fully-depleted CCDs in the lab using a bench-top simulation of LSST observing. By illuminating an array of forty thousand pinholes (30mu m diameter) at the object plane of a f/1.2 optical reimager, thousands of PSFs can be imaged over a 4Kx4K pixel CCD. Each high purity silicon pixel, 10mu m square by 100mu m deep, can then be indiv…
▽ More
We characterize the astrometric distortion at the edges of thick, fully-depleted CCDs in the lab using a bench-top simulation of LSST observing. By illuminating an array of forty thousand pinholes (30mu m diameter) at the object plane of a f/1.2 optical reimager, thousands of PSFs can be imaged over a 4Kx4K pixel CCD. Each high purity silicon pixel, 10mu m square by 100mu m deep, can then be individually characterized through a series of sub-pixel dithers in the X/Y plane. The unique character [response, position, shape] of each pixel as a function of flux, wavelength, back side bias, etc. can be investigated. We measure the magnitude and onset of astrometric error at the edges of the detector as a test of the experimental setup, using a LSST prototype CCD. We show that this astrometric error at the edge is sourced from non-uniformities in the electric field lines that define pixel boundaries. This edge distortion must be corrected in order to optimize the science output of weak gravitational lensing and large scale structure measurements for the LSST.
△ Less
Submitted 9 July, 2015;
originally announced July 2015.
-
Another shock for the Bullet cluster, and the source of seed electrons for radio relics
Authors:
Timothy W. Shimwell,
Maxim Markevitch,
Shea Brown,
Luigina Feretti,
B. M. Gaensler,
M. Johnston-Hollitt,
Craig Lage,
Raghav Srinivasan
Abstract:
With Australia Telescope Compact Array observations, we detect a highly elongated Mpc-scale diffuse radio source on the eastern periphery of the Bullet cluster 1E0657-55.8, which we argue has the positional, spectral and polarimetric characteristics of a radio relic. This powerful relic (2.3+/-0.1 x 10^25 W Hz^-1) consists of a bright northern bulb and a faint linear tail. The bulb emits 94% of th…
▽ More
With Australia Telescope Compact Array observations, we detect a highly elongated Mpc-scale diffuse radio source on the eastern periphery of the Bullet cluster 1E0657-55.8, which we argue has the positional, spectral and polarimetric characteristics of a radio relic. This powerful relic (2.3+/-0.1 x 10^25 W Hz^-1) consists of a bright northern bulb and a faint linear tail. The bulb emits 94% of the observed radio flux and has the highest surface brightness of any known relic. Exactly coincident with the linear tail we find a sharp X-ray surface brightness edge in the deep Chandra image of the cluster -- a signature of a shock front in the hot intracluster medium (ICM), located on the opposite side of the cluster to the famous bow shock. This new example of an X-ray shock coincident with a relic further supports the hypothesis that shocks in the outer regions of clusters can form relics via diffusive shock (re-)acceleration. Intriguingly, our new relic suggests that seed electrons for reacceleration are coming from a local remnant of a radio galaxy, which we are lucky to catch before its complete disruption. If this scenario, in which a relic forms when a shock crosses a well-defined region of the ICM polluted with aged relativistic plasma -- as opposed to the usual assumption that seeds are uniformly mixed in the ICM -- is also the case for other relics, this may explain a number of peculiar properties of peripheral relics.
△ Less
Submitted 21 March, 2016; v1 submitted 29 January, 2015;
originally announced February 2015.
-
The Bullet Cluster is not a Cosmological Anomaly
Authors:
Craig Lage,
Glennys R. Farrar
Abstract:
The Bullet Cluster (1E0657-56) merger is of exceptional interest for testing the standard cold-dark-matter plus cosmological constant cosmological model, and for investigating the possible existence of a long- or short-range "fifth-force" in the dark sector and possible need for modifications of general relativity or even of Newtonian gravity. The most recent previous simulations of the Bullet Clu…
▽ More
The Bullet Cluster (1E0657-56) merger is of exceptional interest for testing the standard cold-dark-matter plus cosmological constant cosmological model, and for investigating the possible existence of a long- or short-range "fifth-force" in the dark sector and possible need for modifications of general relativity or even of Newtonian gravity. The most recent previous simulations of the Bullet Cluster merger required an initial infall velocity far in excess of what would be expected within the standard cosmological model, at least in the absence of additional forces or modifications to gravity. We have carried out much more detailed simulations, making pixel-by-pixel fits to 2D data-maps of the mass distribution and X-ray emission, allowing for triaxial initial configurations and including MHD and cooling. Here, we compare the initial conditions of the Bullet Cluster merger to those in similar-mass merging clusters in the Horizon cosmological simulation. We conclude that the observed properties of the Bullet Cluster are completely consistent with Lambda-CDM.
△ Less
Submitted 5 March, 2015; v1 submitted 25 June, 2014;
originally announced June 2014.
-
Deep radio observations of the radio halo of the bullet cluster 1E 0657-55.8
Authors:
Timothy W. Shimwell,
Shea Brown,
Ilana J. Feain,
Luigina Feretti,
B. M. Gaensler,
Craig Lage
Abstract:
We present deep 1.1-3.1 GHz Australia Telescope Compact Array observations of the radio halo of the bullet cluster, 1E 0657-55.8. In comparison to existing images of this radio halo the detection in our images is at higher significance. The radio halo is as extended as the X-ray emission in the direction of cluster merger but is significantly less extended than the X-ray emission in the perpendicu…
▽ More
We present deep 1.1-3.1 GHz Australia Telescope Compact Array observations of the radio halo of the bullet cluster, 1E 0657-55.8. In comparison to existing images of this radio halo the detection in our images is at higher significance. The radio halo is as extended as the X-ray emission in the direction of cluster merger but is significantly less extended than the X-ray emission in the perpendicular direction. At low significance we detect a faint second peak in the radio halo close to the X-ray centroid of the smaller sub-cluster (the bullet) suggesting that, similarly to the X-ray emission, the radio halo may consist of two components. Finally, we find that the distinctive shape of the western edge of the radio halo traces out the X-ray detected bow shock. The radio halo morphology and the lack of strong point-to-point correlations between radio, X-ray and weak-lensing properties suggests that the radio halo is still being formed. The colocation of the X-ray shock with a distinctive radio brightness edge illustrates that the shock is influencing the structure of the radio halo. These observations support the theory that shocks and turbulence influence the formation and evolution of radio halo synchrotron emission.
△ Less
Submitted 10 March, 2014;
originally announced March 2014.
-
Constrained Simulation of the Bullet Cluster
Authors:
Craig Lage,
Glennys Farrar
Abstract:
In this work, we report on a detailed simulation of the Bullet Cluster (1E0657-56) merger, including magnetohydrodynamics, plasma cooling, and adaptive mesh refinement. We constrain the simulation with data from gravitational lensing reconstructions and 0.5 - 2 keV Chandra X-ray flux map, then compare the resulting model to higher energy X-ray fluxes, the extracted plasma temperature map, Sunyaev-…
▽ More
In this work, we report on a detailed simulation of the Bullet Cluster (1E0657-56) merger, including magnetohydrodynamics, plasma cooling, and adaptive mesh refinement. We constrain the simulation with data from gravitational lensing reconstructions and 0.5 - 2 keV Chandra X-ray flux map, then compare the resulting model to higher energy X-ray fluxes, the extracted plasma temperature map, Sunyaev-Zel'dovich effect measurements, and cluster halo radio emission. We constrain the initial conditions by minimizing the chi-squared figure of merit between the full 2D observational data sets and the simulation, rather than comparing only a few features such as the location of subcluster centroids, as in previous studies. A simple initial configuration of two triaxial clusters with NFW dark matter profiles and physically reasonable plasma profiles gives a good fit to the current observational morphology and X-ray emissions of the merging clusters. There is no need for unconventional physics or extreme infall velocities. The study gives insight into the astrophysical processes at play during a galaxy cluster merger, and constrains the strength and coherence length of the magnetic fields. The techniques developed here to create realistic, stable, triaxial clusters, and to utilize the totality of the 2D image data, will be applicable to future simulation studies of other merging clusters. This approach of constrained simulation, when applied to well-measured systems, should be a powerful complement to present tools for understanding X-ray clusters and their magnetic fields, and the processes governing their formation.
△ Less
Submitted 3 December, 2013;
originally announced December 2013.
-
"Probing the limits of extremophilic life in extraterrestrial environment-simulated experiments"
Authors:
Claudia Lage,
Gabriel Dalmaso,
Lia Teixeira,
Amanda Bendia,
Ivan Paulino-Lima,
Douglas Galante,
Eduardo Janot-Pacheco,
Ximena Abrevaya,
Armando Azúa-Bustos,
Vivian Pellizari,
Alexandre Rosado
Abstract:
The results obtained in these experiments have revealed a remarkable resistance of extremophilic bacteria and archaea against different radiation sources (VUV, solar wind simulants, X rays) whenever protected by microsized carbonaceus grains. Altogether, the collected data suggest the interesting possibility of the existence of microbial life beyond Earth and its transfer among habitable bodies, w…
▽ More
The results obtained in these experiments have revealed a remarkable resistance of extremophilic bacteria and archaea against different radiation sources (VUV, solar wind simulants, X rays) whenever protected by microsized carbonaceus grains. Altogether, the collected data suggest the interesting possibility of the existence of microbial life beyond Earth and its transfer among habitable bodies, which we have called microlithopanspermia.
△ Less
Submitted 9 July, 2012;
originally announced July 2012.
-
Comparative Survival Analysis of Deinococcus Radiodurans and the Haloarchaea Natrialba Magadii and Haloferax Volcanii, Exposed to Vacuum Ultraviolet Irradiation
Authors:
Ximena C. Abrevaya,
Ivan G. Paulino-Lima,
Douglas Galante,
Fabio Rodrigues,
Pablo J. D. Mauas,
Eduardo Corton,
Claudia de Alencar Santos Lage
Abstract:
The haloarchaea Natrialba magadii and Haloferax volcanii, as well as the radiation-resistant bacterium Deinococcus radiodurans, were exposed to vacuum-UV (V-UV) radiation at the Brazilian Synchrotron Light Laboratory (LNLS). Cell monolayers (containing 105 - 106 cells per sample) were prepared over polycarbonate filters and irradiated under high vacuum (10-5 Pa) with polychromatic synchrotron radi…
▽ More
The haloarchaea Natrialba magadii and Haloferax volcanii, as well as the radiation-resistant bacterium Deinococcus radiodurans, were exposed to vacuum-UV (V-UV) radiation at the Brazilian Synchrotron Light Laboratory (LNLS). Cell monolayers (containing 105 - 106 cells per sample) were prepared over polycarbonate filters and irradiated under high vacuum (10-5 Pa) with polychromatic synchrotron radiation. N. magadii was remarkably resistant to high vacuum with a survival fraction of ((3.77 \pm 0.76) x 10-2), larger than the one of D. radiodurans ((1.13 \pm 0.23) x 10-2). The survival fraction of the haloarchaea H. volcanii, of ((3.60 \pm 1.80) x 10-4), was much smaller. Radiation resistance profiles were similar between the haloarchaea and D. radiodurans for fluencies up to 150 J m-2. For fluencies larger than 150 J m-2 there was a significant decrease in the survival of haloarchaea, and in particular H. volcanii did not survive. Survival for D. radiodurans was 1% after exposure to the higher V-UV fluency (1350 J m-2) while N. magadii had a survival lower than 0.1%. Such survival fractions are discussed regarding the possibility of interplanetary transfer of viable micro-organisms and the possible existence of microbial life in extraterrestrial salty environments such as the planet Mars and the Jupiter's moon Europa. This is the first work reporting survival of haloarchaea under simulated interplanetary conditions.
△ Less
Submitted 29 September, 2011;
originally announced September 2011.
-
LSST: from Science Drivers to Reference Design and Anticipated Data Products
Authors:
Željko Ivezić,
Steven M. Kahn,
J. Anthony Tyson,
Bob Abel,
Emily Acosta,
Robyn Allsman,
David Alonso,
Yusra AlSayyad,
Scott F. Anderson,
John Andrew,
James Roger P. Angel,
George Z. Angeli,
Reza Ansari,
Pierre Antilogus,
Constanza Araujo,
Robert Armstrong,
Kirk T. Arndt,
Pierre Astier,
Éric Aubourg,
Nicole Auza,
Tim S. Axelrod,
Deborah J. Bard,
Jeff D. Barr,
Aurelian Barrau,
James G. Bartlett
, et al. (288 additional authors not shown)
Abstract:
(Abridged) We describe here the most ambitious survey currently planned in the optical, the Large Synoptic Survey Telescope (LSST). A vast array of science will be enabled by a single wide-deep-fast sky survey, and LSST will have unique survey capability in the faint time domain. The LSST design is driven by four main science themes: probing dark energy and dark matter, taking an inventory of the…
▽ More
(Abridged) We describe here the most ambitious survey currently planned in the optical, the Large Synoptic Survey Telescope (LSST). A vast array of science will be enabled by a single wide-deep-fast sky survey, and LSST will have unique survey capability in the faint time domain. The LSST design is driven by four main science themes: probing dark energy and dark matter, taking an inventory of the Solar System, exploring the transient optical sky, and mapping the Milky Way. LSST will be a wide-field ground-based system sited at Cerro Pachón in northern Chile. The telescope will have an 8.4 m (6.5 m effective) primary mirror, a 9.6 deg$^2$ field of view, and a 3.2 Gigapixel camera. The standard observing sequence will consist of pairs of 15-second exposures in a given field, with two such visits in each pointing in a given night. With these repeats, the LSST system is capable of imaging about 10,000 square degrees of sky in a single filter in three nights. The typical 5$σ$ point-source depth in a single visit in $r$ will be $\sim 24.5$ (AB). The project is in the construction phase and will begin regular survey operations by 2022. The survey area will be contained within 30,000 deg$^2$ with $δ<+34.5^\circ$, and will be imaged multiple times in six bands, $ugrizy$, covering the wavelength range 320--1050 nm. About 90\% of the observing time will be devoted to a deep-wide-fast survey mode which will uniformly observe a 18,000 deg$^2$ region about 800 times (summed over all six bands) during the anticipated 10 years of operations, and yield a coadded map to $r\sim27.5$. The remaining 10\% of the observing time will be allocated to projects such as a Very Deep and Fast time domain survey. The goal is to make LSST data products, including a relational database of about 32 trillion observations of 40 billion objects, available to the public and scientists around the world.
△ Less
Submitted 23 May, 2018; v1 submitted 15 May, 2008;
originally announced May 2008.