-
Lessons learned from NASA's DART impact about disrupting rubble-pile asteroids
Authors:
S. D. Raducan,
M. Jutzi,
C. C. Merrill,
P. Michel,
Y. Zhang,
M. Hirabayashi,
A. Mainzer
Abstract:
We present a series of numerical simulations using a shock physics smoothed particle hydrodynamics (SPH) code, investigating energetic impacts on small celestial bodies characterised by diverse internal structures, ranging from weak and homogeneous compositions to rubble-pile structures with varying boulder volume packing. Our findings reveal that the internal structure of these rubble-pile bodies…
▽ More
We present a series of numerical simulations using a shock physics smoothed particle hydrodynamics (SPH) code, investigating energetic impacts on small celestial bodies characterised by diverse internal structures, ranging from weak and homogeneous compositions to rubble-pile structures with varying boulder volume packing. Our findings reveal that the internal structure of these rubble-pile bodies significantly influences the impact outcomes. Specifically, we observe that the same impact energy can either catastrophically disrupt a target with a low boulder packing (<30 vol%), or result in the ejection of only a small fraction of material from a target with the same mass but high boulder packing (>40 vol%). This finding highlights the pivotal role played by the rubble-pile structure, effectively acting as a bulk shear strength, which governs the size and behaviour of the resulting impact. Consequently, understanding and characterising the internal structure of asteroids will be of paramount importance for any future efforts to deflect or disrupt an asteroid on a collision course with Earth.
△ Less
Submitted 1 March, 2024;
originally announced March 2024.
-
Physical properties of asteroid Dimorphos as derived from the DART impact
Authors:
S. D. Raducan,
M. Jutzi,
A. F. Cheng,
Y. Zhang,
O. Barnouin,
G. S. Collins,
R. T. Daly,
T. M. Davison,
C. M. Ernst,
T. L. Farnham,
F. Ferrari,
M. Hirabayashi,
K. M. Kumamoto,
P. Michel,
N. Murdoch,
R. Nakano,
M. Pajola,
A. Rossi,
H. F. Agrusa,
B. W. Barbee,
M. Bruck Syal,
N. L. Chabot,
E. Dotto,
E. G. Fahnestock,
P. H. Hasselmann
, et al. (17 additional authors not shown)
Abstract:
On September 26, 2022, NASA's Double Asteroid Redirection Test (DART) mission successfully impacted Dimorphos, the natural satellite of the binary near-Earth asteroid (65803) Didymos. Numerical simulations of the impact provide a means to explore target surface material properties and structures, consistent with the observed momentum deflection efficiency, ejecta cone geometry, and ejected mass. O…
▽ More
On September 26, 2022, NASA's Double Asteroid Redirection Test (DART) mission successfully impacted Dimorphos, the natural satellite of the binary near-Earth asteroid (65803) Didymos. Numerical simulations of the impact provide a means to explore target surface material properties and structures, consistent with the observed momentum deflection efficiency, ejecta cone geometry, and ejected mass. Our simulation, which best matches observations, indicates that Dimorphos is weak, with a cohesive strength of less than a few pascals (Pa), similar to asteroids (162173) Ryugu and (101955) Bennu. We find that a bulk density of Dimorphos, rhoB, lower than 2400 kg/m3, and a low volume fraction of boulders (<40 vol%) on the surface and in the shallow subsurface, are consistent with measured data from the DART experiment. These findings suggest Dimorphos is a rubble pile that might have formed through rotational mass shedding and re-accumulation from Didymos. Our simulations indicate that the DART impact caused global deformation and resurfacing of Dimorphos. ESA's upcoming Hera mission may find a re-shaped asteroid, rather than a well-defined crater.
△ Less
Submitted 1 March, 2024;
originally announced March 2024.
-
Momentum Transfer from the DART Mission Kinetic Impact on Asteroid Dimorphos
Authors:
Andrew F. Cheng,
Harrison F. Agrusa,
Brent W. Barbee,
Alex J. Meyer,
Tony L. Farnham,
Sabina D. Raducan,
Derek C. Richardson,
Elisabetta Dotto,
Angelo Zinzi,
Vincenzo Della Corte,
Thomas S. Statler,
Steven Chesley,
Shantanu P. Naidu,
Masatoshi Hirabayashi,
Jian-Yang Li,
Siegfried Eggl,
Olivier S. Barnouin,
Nancy L. Chabot,
Sidney Chocron,
Gareth S. Collins,
R. Terik Daly,
Thomas M. Davison,
Mallory E. DeCoster,
Carolyn M. Ernst,
Fabio Ferrari
, et al. (44 additional authors not shown)
Abstract:
The NASA Double Asteroid Redirection Test (DART) mission performed a kinetic impact on asteroid Dimorphos, the satellite of the binary asteroid (65803) Didymos, at 23:14 UTC on September 26, 2022 as a planetary defense test. DART was the first hypervelocity impact experiment on an asteroid at size and velocity scales relevant to planetary defense, intended to validate kinetic impact as a means of…
▽ More
The NASA Double Asteroid Redirection Test (DART) mission performed a kinetic impact on asteroid Dimorphos, the satellite of the binary asteroid (65803) Didymos, at 23:14 UTC on September 26, 2022 as a planetary defense test. DART was the first hypervelocity impact experiment on an asteroid at size and velocity scales relevant to planetary defense, intended to validate kinetic impact as a means of asteroid deflection. Here we report the first determination of the momentum transferred to an asteroid by kinetic impact. Based on the change in the binary orbit period, we find an instantaneous reduction in Dimorphos's along-track orbital velocity component of 2.70 +/- 0.10 mm/s, indicating enhanced momentum transfer due to recoil from ejecta streams produced by the impact. For a Dimorphos bulk density range of 1,500 to 3,300 kg/m$^3$, we find that the expected value of the momentum enhancement factor, $β$, ranges between 2.2 and 4.9, depending on the mass of Dimorphos. If Dimorphos and Didymos are assumed to have equal densities of 2,400 kg/m$^3$, $β$= 3.61 +0.19/-0.25 (1 $σ$). These $β$ values indicate that significantly more momentum was transferred to Dimorphos from the escaping impact ejecta than was incident with DART. Therefore, the DART kinetic impact was highly effective in deflecting the asteroid Dimorphos.
△ Less
Submitted 6 March, 2023;
originally announced March 2023.
-
Successful Kinetic Impact into an Asteroid for Planetary Defense
Authors:
R. Terik Daly,
Carolyn M. Ernst,
Olivier S. Barnouin,
Nancy L. Chabot,
Andrew S. Rivkin,
Andrew F. Cheng,
Elena Y. Adams,
Harrison F. Agrusa,
Elisabeth D. Abel,
Amy L. Alford,
Erik I. Asphaug,
Justin A. Atchison,
Andrew R. Badger,
Paul Baki,
Ronald-L. Ballouz,
Dmitriy L. Bekker,
Julie Bellerose,
Shyam Bhaskaran,
Bonnie J. Buratti,
Saverio Cambioni,
Michelle H. Chen,
Steven R. Chesley,
George Chiu,
Gareth S. Collins,
Matthew W. Cox
, et al. (76 additional authors not shown)
Abstract:
While no known asteroid poses a threat to Earth for at least the next century, the catalog of near-Earth asteroids is incomplete for objects whose impacts would produce regional devastation. Several approaches have been proposed to potentially prevent an asteroid impact with Earth by deflecting or disrupting an asteroid. A test of kinetic impact technology was identified as the highest priority sp…
▽ More
While no known asteroid poses a threat to Earth for at least the next century, the catalog of near-Earth asteroids is incomplete for objects whose impacts would produce regional devastation. Several approaches have been proposed to potentially prevent an asteroid impact with Earth by deflecting or disrupting an asteroid. A test of kinetic impact technology was identified as the highest priority space mission related to asteroid mitigation. NASA's Double Asteroid Redirection Test (DART) mission is the first full-scale test of kinetic impact technology. The mission's target asteroid was Dimorphos, the secondary member of the S-type binary near-Earth asteroid (65803) Didymos. This binary asteroid system was chosen to enable ground-based telescopes to quantify the asteroid deflection caused by DART's impact. While past missions have utilized impactors to investigate the properties of small bodies those earlier missions were not intended to deflect their targets and did not achieve measurable deflections. Here we report the DART spacecraft's autonomous kinetic impact into Dimorphos and reconstruct the impact event, including the timeline leading to impact, the location and nature of the DART impact site, and the size and shape of Dimorphos. The successful impact of the DART spacecraft with Dimorphos and the resulting change in Dimorphos's orbit demonstrates that kinetic impactor technology is a viable technique to potentially defend Earth if necessary.
△ Less
Submitted 3 March, 2023;
originally announced March 2023.
-
Ejecta from the DART-produced active asteroid Dimorphos
Authors:
Jian-Yang Li,
Masatoshi Hirabayashi,
Tony L. Farnham,
Jessica M. Sunshine,
Matthew M. Knight,
Gonzalo Tancredi,
Fernando Moreno,
Brian Murphy,
Cyrielle Opitom,
Steve Chesley,
Daniel J. Scheeres,
Cristina A. Thomas,
Eugene G. Fahnestock,
Andrew F. Cheng,
Linda Dressel,
Carolyn M. Ernst,
Fabio Ferrari,
Alan Fitzsimmons,
Simone Ieva,
Stavro L. Ivanovski,
Teddy Kareta,
Ludmilla Kolokolova,
Tim Lister,
Sabina D. Raducan,
Andrew S. Rivkin
, et al. (39 additional authors not shown)
Abstract:
Some active asteroids have been proposed to be the result of impact events. Because active asteroids are generally discovered serendipitously only after their tail formation, the process of the impact ejecta evolving into a tail has never been directly observed. NASA's Double Asteroid Redirection Test (DART) mission, apart from having successfully changed the orbital period of Dimorphos, demonstra…
▽ More
Some active asteroids have been proposed to be the result of impact events. Because active asteroids are generally discovered serendipitously only after their tail formation, the process of the impact ejecta evolving into a tail has never been directly observed. NASA's Double Asteroid Redirection Test (DART) mission, apart from having successfully changed the orbital period of Dimorphos, demonstrated the activation process of an asteroid from an impact under precisely known impact conditions. Here we report the observations of the DART impact ejecta with the Hubble Space Telescope (HST) from impact time T+15 minutes to T+18.5 days at spatial resolutions of ~2.1 km per pixel. Our observations reveal a complex evolution of ejecta, which is first dominated by the gravitational interaction between the Didymos binary system and the ejected dust and later by solar radiation pressure. The lowest-speed ejecta dispersed via a sustained tail that displayed a consistent morphology with previously observed asteroid tails thought to be produced by impact. The ejecta evolution following DART's controlled impact experiment thus provides a framework for understanding the fundamental mechanisms acting on asteroids disrupted by natural impact.
△ Less
Submitted 2 March, 2023;
originally announced March 2023.
-
Constraining surface properties of asteroid (162173) Ryugu from numerical simulations of Hayabusa2 mission impact experiment
Authors:
Martin Jutzi,
Sabina D. Raducan,
Yun Zhang,
Patrick Michel,
Masahiko Arakawa
Abstract:
The Hayabusa2 mission impact experiment on asteroid Ryugu created an unexpectedly large crater. The associated regime of low-gravity, low-strength cratering remained largely unexplored so far, because these impact conditions cannot be re-created in laboratory experiments on Earth. Here we show that the target cohesion may be very low and the impact probably occurred in the transitional cratering r…
▽ More
The Hayabusa2 mission impact experiment on asteroid Ryugu created an unexpectedly large crater. The associated regime of low-gravity, low-strength cratering remained largely unexplored so far, because these impact conditions cannot be re-created in laboratory experiments on Earth. Here we show that the target cohesion may be very low and the impact probably occurred in the transitional cratering regime, between strength and gravity. For such conditions, our numerical simulations are able to reproduce the outcome of the impact on Ryugu, including the effects of boulders originally located near the impact point. Consistent with most recent analysis of Ryugu and Bennu, cratering scaling-laws derived from our results suggest that surfaces of small asteroids must be very young. However, our results also show that the cratering efficiency can be strongly affected by the presence of a very small amount of cohesion. Consequently, the varying ages of different geological surface units on Ryugu may be due to the influence of cohesion.
△ Less
Submitted 8 December, 2022;
originally announced December 2022.
-
Investigating the Feasibility of an Impact-Induced Martian Dichotomy
Authors:
Harry A. Ballantyne,
Martin Jutzi,
Gregor J. Golabek,
Lokesh Mishra,
Kar Wai Cheng,
Antoine B. Rozel,
Paul Tackley
Abstract:
A giant impact is commonly thought to explain the dramatic contrast in elevation and crustal thickness between the two hemispheres of Mars known as the "Martian Dichotomy". Initially, this scenario referred to an impact in the northern hemisphere that would lead to a huge impact basin (dubbed the "Borealis Basin"), while more recent work has instead suggested a hybrid origin that produces the Dich…
▽ More
A giant impact is commonly thought to explain the dramatic contrast in elevation and crustal thickness between the two hemispheres of Mars known as the "Martian Dichotomy". Initially, this scenario referred to an impact in the northern hemisphere that would lead to a huge impact basin (dubbed the "Borealis Basin"), while more recent work has instead suggested a hybrid origin that produces the Dichotomy through impact-induced crust-production. The majority of these studies have relied upon impact scaling-laws inaccurate at such large-scales, however, and those that have included realistic impact models have utilised over-simplified geophysical models and neglected any material strength. Here we use a large suite of strength-including smoothed-particle hydrodynamics (SPH) impact simulations coupled with a more sophisticated geophysical scheme of crust production and primordial crust to simultaneously investigate the feasibility of a giant impact on either hemisphere of Mars to have produced its dichotomous crust distribution, and utilise spherical harmonic analysis to identify the best-fitting cases. We find that the canonical Borealis-forming impact is not possible without both excessive crust production and strong antipodal effects not seen on Mars' southern hemisphere today. Our results instead favour an impact and subsequent localised magma ocean in the southern hemisphere that results in a thicker crust than the north upon crystallisation. Specifically, our best-fitting cases suggest that the projectile responsible for the Dichotomy-forming event was of radius 500-750 km, and collided with Mars at an impact angle of 15-30° with a velocity of 1.2-1.4 times mutual escape speed ($\sim$6-7 km/s).
△ Less
Submitted 5 December, 2022;
originally announced December 2022.
-
After DART: Using the first full-scale test of a kinetic impactor to inform a future planetary defense mission
Authors:
Thomas S. Statler,
Sabina D. Raducan,
Olivier S. Barnouin,
Mallory E. DeCoster,
Steven R. Chesley,
Brent Barbee,
Harrison F. Agrusa,
Saverio Cambioni,
Andrew F. Cheng,
Elisabetta Dotto,
Siegfried Eggl,
Eugene G. Fahnestock,
Fabio Ferrari,
Dawn Graninger,
Alain Herique,
Isabel Herreros,
Masatoshi Hirabayashi,
Stavro Ivanovski,
Martin Jutzi,
Özgür Karatekin,
Alice Lucchetti,
Robert Luther,
Rahil Makadia,
Francesco Marzari,
Patrick Michel
, et al. (16 additional authors not shown)
Abstract:
NASA's Double Asteroid Redirection Test (DART) is the first full-scale test of an asteroid deflection technology. Results from the hypervelocity kinetic impact and Earth-based observations, coupled with LICIACube and the later Hera mission, will result in measurement of the momentum transfer efficiency accurate to ~10% and characterization of the Didymos binary system. But DART is a single experim…
▽ More
NASA's Double Asteroid Redirection Test (DART) is the first full-scale test of an asteroid deflection technology. Results from the hypervelocity kinetic impact and Earth-based observations, coupled with LICIACube and the later Hera mission, will result in measurement of the momentum transfer efficiency accurate to ~10% and characterization of the Didymos binary system. But DART is a single experiment; how could these results be used in a future planetary defense necessity involving a different asteroid? We examine what aspects of Dimorphos's response to kinetic impact will be constrained by DART results; how these constraints will help refine knowledge of the physical properties of asteroidal materials and predictive power of impact simulations; what information about a potential Earth impactor could be acquired before a deflection effort; and how design of a deflection mission should be informed by this understanding. We generalize the momentum enhancement factor $β$, showing that a particular direction-specific $β$ will be directly determined by the DART results, and that a related direction-specific $β$ is a figure of merit for a kinetic impact mission. The DART $β$ determination constrains the ejecta momentum vector, which, with hydrodynamic simulations, constrains the physical properties of Dimorphos's near-surface. In a hypothetical planetary defense exigency, extrapolating these constraints to a newly discovered asteroid will require Earth-based observations and benefit from in-situ reconnaissance. We show representative predictions for momentum transfer based on different levels of reconnaissance and discuss strategic targeting to optimize the deflection and reduce the risk of a counterproductive deflection in the wrong direction.
△ Less
Submitted 23 September, 2022;
originally announced September 2022.
-
Effects of impact and target parameters on the results of a kinetic impactor: predictions for the Double Asteroid Redirection Test (DART) mission
Authors:
Angela M. Stickle,
Mallory E. DeCoster,
Christoph Burger,
Wendy K. Caldwell,
Dawn Graninger,
Kathryn M. Kumamoto,
Robert Luther,
Jens Ormö,
Sabina Raducan,
Emma Rainey,
Christoph M. Schäfer,
James D. Walker,
Yun Zhang,
Patrick Michel,
J. Michael Owen,
Olivier Barnouin,
Andy F. Cheng,
Sidney Cochron,
Gareth S. Collins,
Thomas M. Davison,
Elisabetta Dotto,
Fabio Ferrari,
M. Isabel Herreros,
Stavro L. Ivanovski,
Martin Jutzi
, et al. (8 additional authors not shown)
Abstract:
The Double Asteroid Redirection Test (DART) spacecraft will impact into the asteroid Dimorphos on September 26, 2022 as a test of the kinetic impactor technique for planetary defense. The efficiency of the deflection following a kinetic impactor can be represented using the momentum enhancement factor, Beta, which is dependent on factors such as impact geometry and the specific target material pro…
▽ More
The Double Asteroid Redirection Test (DART) spacecraft will impact into the asteroid Dimorphos on September 26, 2022 as a test of the kinetic impactor technique for planetary defense. The efficiency of the deflection following a kinetic impactor can be represented using the momentum enhancement factor, Beta, which is dependent on factors such as impact geometry and the specific target material properties. Currently, very little is known about Dimorphos and its material properties that introduces uncertainty in the results of the deflection efficiency observables, including crater formation, ejecta distribution, and Beta. The DART Impact Modeling Working Group (IWG) is responsible for using impact simulations to better understand the results of the DART impact. Pre-impact simulation studies also provide considerable insight into how different properties and impact scenarios affect momentum enhancement following a kinetic impact. This insight provides a basis for predicting the effects of the DART impact and the first understanding of how to interpret results following the encounter. Following the DART impact, the knowledge gained from these studies will inform the initial simulations that will recreate the impact conditions, including providing estimates for potential material properties of Dimorphos and Beta resulting from DARTs impact. This paper summarizes, at a high level, what has been learned from the IWG simulations and experiments in preparation for the DART impact. While unknown, estimates for reasonable potential material properties of Dimorphos provide predictions for Beta of 1-5, depending on end-member cases in the strength regime.
△ Less
Submitted 14 September, 2022;
originally announced September 2022.
-
Reshaping and ejection processes on rubble-pile asteroids by impacts
Authors:
S. D. Raducan,
M. Jutzi,
Y. Zhang,
J. Ormö,
P. Michel
Abstract:
Context. Most small asteroids (<50 km in diameter) are the result of the breakup of a larger parent body and are often considered to be rubble-pile objects. Similar structures are expected for the secondaries of small asteroid binaries, including Dimorphos, the smaller component of the 65803 Didymos binary system and the target of NASA's Double Asteroid Redirection Test (DART) and ESA's Hera missi…
▽ More
Context. Most small asteroids (<50 km in diameter) are the result of the breakup of a larger parent body and are often considered to be rubble-pile objects. Similar structures are expected for the secondaries of small asteroid binaries, including Dimorphos, the smaller component of the 65803 Didymos binary system and the target of NASA's Double Asteroid Redirection Test (DART) and ESA's Hera mission. The DART impact occurs on September 26th, 2022 and it will alter the orbital period of Dimorphos around Didymos. Aims. In this work we assume Dimorphos-like bodies with a rubble-pile structure, and quantify the effects of boulder packing in its interior on the post-impact morphology, degree of shape change and material ejection processes. Methods. We used the Bern SPH shock physics code to numerically model hypervelocity impacts into small, 160 m in diameter rubble-pile asteroids, with a variety of boulder distributions. Results. We find that the post-impact target morphology is most sensitive to the mass-fraction of boulders in the target, while the asteroid deflection efficiency depends on both the mass-fraction of boulders in the target and on the boulder size-distribution close to the impact point. Our results may also have important implications for the structure of small asteroids.
△ Less
Submitted 16 September, 2022; v1 submitted 6 September, 2022;
originally announced September 2022.
-
Predictions for the Dynamical States of the Didymos System before and after the Planned DART Impact
Authors:
Derek C. Richardson,
Harrison F. Agrusa,
Brent Barbee,
William F. Bottke,
Andrew F. Cheng,
Siegfried Eggl,
Fabio Ferrari,
Masatoshi Hirabayashi,
Özgür Karatekin,
Jay McMahon,
Stephen R. Schwartz,
Ronald-Louis Ballouz,
Adriano Campo Bagatin,
Elisabetta Dotto,
Eugene G. Fahnestock,
Oscar Fuentes-Muñoz,
Ioannis Gkolias,
Douglas P. Hamilton,
Seth A. Jacobson,
Martin Jutzi,
Josh Lyzhoft,
Rahil Makadia,
Alex J. Meyer,
Patrick Michel,
Ryota Nakano
, et al. (11 additional authors not shown)
Abstract:
NASA's Double Asteroid Redirection Test (DART) spacecraft is planned to impact the natural satellite of (65803) Didymos, Dimorphos, around 23:14 UTC on 26 September 2022, causing a reduction in its orbital period that will be measurable with ground-based observations. This test of kinetic impactor technology will provide the first estimate of the momentum transfer enhancement factor $β$ at a reali…
▽ More
NASA's Double Asteroid Redirection Test (DART) spacecraft is planned to impact the natural satellite of (65803) Didymos, Dimorphos, around 23:14 UTC on 26 September 2022, causing a reduction in its orbital period that will be measurable with ground-based observations. This test of kinetic impactor technology will provide the first estimate of the momentum transfer enhancement factor $β$ at a realistic scale, wherein ejecta from the impact provides an additional deflection to the target. Earth-based observations, the LICIACube spacecraft (to be detached from DART prior to impact), and ESA's follow-up Hera mission to launch in 2024, will provide additional characterization of the deflection test. Together Hera and DART comprise the Asteroid Impact and Deflection Assessment (AIDA) cooperation between NASA and ESA. Here the predicted dynamical states of the binary system upon arrival and after impact are presented. The assumed dynamically relaxed state of the system will be excited by the impact, leading to an increase in eccentricity and slight tilt of the orbit together with enhanced libration of Dimorphos with amplitude dependent on the currently poorly known target shape. Free rotation around the moon's long axis may also be triggered and the orbital period will experience variations from seconds to minutes over timescales of days to months. Shape change of either body due to cratering or mass wasting triggered by crater formation and ejecta may affect $β$ but can be constrained through additional measurements. Both BYORP and gravity tides may cause measurable orbital changes on the timescale of Hera's rendezvous.
△ Less
Submitted 14 July, 2022;
originally announced July 2022.
-
Discovery of an asteroid family linked to (22) Kalliope and its moon Linus
Authors:
M. Brož,
M. Ferrais,
P. Vernazza,
P. Ševeček,
M. Jutzi
Abstract:
According to adaptive-optics observations by Ferrais et al., (22) Kalliope is a 150-km, dense and differentiated body. Here, we interpret (22) Kalliope in the context of bodies in its surroundings. While there is a known moon Linus, with a 5:1 size ratio, no family has been reported in the literature, which is in contradiction with the existence of the moon. Using the hierarchical clustering metho…
▽ More
According to adaptive-optics observations by Ferrais et al., (22) Kalliope is a 150-km, dense and differentiated body. Here, we interpret (22) Kalliope in the context of bodies in its surroundings. While there is a known moon Linus, with a 5:1 size ratio, no family has been reported in the literature, which is in contradiction with the existence of the moon. Using the hierarchical clustering method (HCM) along with physical data, we identified the Kalliope family. Previously, it was associated to (7481) San Marcello. We then used various models (N-body, Monte-Carlo, SPH) of its orbital and collisional evolution, including the break-up of the parent body, to estimate the dynamical age of the family and address its link to Linus. The best-fit age is (900+-100) My according to our collisional model, in agreement with the position of (22) Kalliope, which was modified by chaotic diffusion due to 4-1-1 three-body resonance with Jupiter and Saturn. It seems possible to create Linus and the Kalliope family at the same time, although our SPH simulations show a variety of outcomes, for both satellite size and the family size-frequency distribution. The shape of (22) Kalliope itself was most likely affected by gravitational reaccumulation of `streams', which creates characteristic hills observed on the surface. If the body was differentiated, its internal structure is surely asymmetric.
△ Less
Submitted 31 May, 2022;
originally announced May 2022.
-
Influence of the projectile geometry on the momentum transfer from a kinetic impactor and implications for the DART mission
Authors:
S. D. Raducan,
M. Jutzi,
T. M. Davison,
M. E. DeCoster,
D. M. Graninger,
J. M. Owen,
A. M. Stickle,
G. S. Collins
Abstract:
The DART spacecraft will impact Didymos's secondary, Dimorphos, at the end of 2022 and cause a change in the orbital period of the secondary. For simplicity, most previous numerical simulations of the impact used a spherical projectile geometry to model the DART spacecraft. To investigate the effects of alternative, simple projectile geometries on the DART impact outcome we used the iSALE shock ph…
▽ More
The DART spacecraft will impact Didymos's secondary, Dimorphos, at the end of 2022 and cause a change in the orbital period of the secondary. For simplicity, most previous numerical simulations of the impact used a spherical projectile geometry to model the DART spacecraft. To investigate the effects of alternative, simple projectile geometries on the DART impact outcome we used the iSALE shock physics code in two and thee-dimensions to model vertical impacts of projectiles with a mass and speed equivalent to the nominal DART impact, into porous basalt targets. We found that the simple projectile geometries investigated here have minimal effects on the crater morphology and momentum enhancement. Projectile geometries modelled in two-dimensions that have similar surface areas at the point of impact, affect the crater radius and the crater volume by less than 5%. In the case of a more extreme projectile geometry (i.e., a rod, modelled in three-dimensions), the crater was elliptical and 50% shallower compared to the crater produced by a spherical projectile of the same momentum. The momentum enhancement factor in these test cases, commonly referred to as beta, was within 7% for the 2D simulations and within 10% for the 3D simulations, of the value obtained for a uniform spherical projectile. The most prominent effects of projectile geometry are seen in the ejection velocity as a function of launch position and ejection angle of the fast ejecta that resides in the so-called `coupling zone'. These results will inform the LICIACube ejecta cone analysis.
△ Less
Submitted 5 January, 2022;
originally announced January 2022.
-
Modification of icy planetesimals by early thermal evolution and collisions: Constraints for formation time and initial size of comets and small KBOs
Authors:
Gregor Golabek,
Martin Jutzi
Abstract:
Comets and small Kuiper belt objects are considered to be among the most primitive objects in the solar system as comets like C/1995 O1 Hale-Bopp are rich in highly volatile ices like CO. It has been suggested that early in the solar system evolution the precursors of both groups, the so-called icy planetesimals, were modified by both short-lived radiogenic heating and collisional heating. Here we…
▽ More
Comets and small Kuiper belt objects are considered to be among the most primitive objects in the solar system as comets like C/1995 O1 Hale-Bopp are rich in highly volatile ices like CO. It has been suggested that early in the solar system evolution the precursors of both groups, the so-called icy planetesimals, were modified by both short-lived radiogenic heating and collisional heating. Here we employ 2D finite-difference numerical models to study the internal thermal evolution of these objects, where we vary formation time, radius and rock-to-ice mass fraction. Additionally we perform 3D SPH collision models with different impact parameters, thus considering both cratering and catastrophic disruption events. Combining the results of both numerical models we estimate under which conditions highly volatile ices like CO, CO2 and NH3 can be retained inside present-day comets and Kuiper belt objects. Our results indicate that for present-day objects derived from the largest post-collision remnant the internal thermal evolution controls the amount of remaining highly volatile ices, while for the objects formed from unbound post-collision material the impact heating is dominant. Finally we apply our results to present-day comets and Kuiper belt objects like 67P/Churyumov-Gerasimenko, C/1995 O1 Hale-Bopp and (486958) Arrokoth.
△ Less
Submitted 31 March, 2021;
originally announced March 2021.
-
Collisional heating and compaction of small bodies: Constraints for their origin and evolution
Authors:
Martin Jutzi,
Patrick Michel
Abstract:
The current properties of small bodies provide important clues to their origin and history. However, how much small bodies were processed by past collisions and to what extent they retain a record of processes that took place during the formation and early evolution of the Solar System is still poorly understood. Here we study the degree of collisional heating and compaction by analysing the large…
▽ More
The current properties of small bodies provide important clues to their origin and history. However, how much small bodies were processed by past collisions and to what extent they retain a record of processes that took place during the formation and early evolution of the Solar System is still poorly understood. Here we study the degree of collisional heating and compaction by analysing the large set of previous simulations of small body break-ups by Jutzi et al. (2019), which used porous targets of 50 - 400 km in diameter and investigated a large range of impact velocities, angles as well as energies. We find that the degree of impact processing is generally larger than found in previous studies which considered smaller objects (e.g. Jutzi et al., 2017; Schwartz et al., 2018). However, there is a clear dichotomy in terms of impact processing: the escaping material always experiences stronger heating than the material bound to the largest remnant. Assuming they originate from the same parent body, some of the observed differences between the recently visited asteroids Ryugu and Bennu may be explained by a different location of the material eventually forming these asteroids in the original parent body. Our results also provide constraints on the initial size of cometary nuclei.
△ Less
Submitted 26 May, 2020;
originally announced May 2020.
-
The shape and structure of small asteroids as a result of sub-catastrophic collisions
Authors:
Martin Jutzi
Abstract:
The overall shape, internal structure and surface morphology of small bodies such as asteroids and comets are determined to a large degree by the last global-scale impact or disruption event. Depending on the specific energy, impacts lead to a large spectrum of outcomes. Sub-catastrophic disruptions take place in an energy range between cratering impacts and catastrophic disruptions. Although less…
▽ More
The overall shape, internal structure and surface morphology of small bodies such as asteroids and comets are determined to a large degree by the last global-scale impact or disruption event. Depending on the specific energy, impacts lead to a large spectrum of outcomes. Sub-catastrophic disruptions take place in an energy range between cratering impacts and catastrophic disruptions. Although less energetic than catastrophic events, they can still significantly alter the overall shape and structure of the target body. This has been demonstrated recently in the case of bi-lobe cometary nuclei (Jutzi and Benz, 2017). Here we present results of a subsequent study on the shapes of asteroids resulting from such collisions. Sizes ranging from a few hundred meters to a few kilometers are considered.
We show that impacts on elongated rotating asteroids frequently lead to the formation of contact binaries. Our results confirm that this mechanism is robust and works for a large range of asteroid sizes and impact velocities. Scaling-laws for the prediction of the size and velocity dependent specific energies required for successful bi-lobe formation are presented. Based on these scaling laws, the expected frequency of such sub-catastrophic impacts is calculated and is compared to the one of catastrophic disruptions, which require much higher specific energies and are more rare.
Our analysis suggest that the shapes and structures of a large fraction of small asteroids as observed today may be the result of the last major sub-catastrophic impact.
△ Less
Submitted 28 October, 2019;
originally announced October 2019.
-
Impacts into rotating targets: angular momentum draining and efficient formation of synthetic families
Authors:
P. Ševeček,
M. Brož,
M. Jutzi
Abstract:
About 10% of the observed asteroids have rotational periods lower than P = 3 h and they seem to be relatively close to the spin barrier. Yet, the rotation has often been neglected in simulations of asteroid collisions. To determine the effect of rotation, we perform a large number of SPH/N-body impact simulations with rotating targets. We developed a new unified SPH/N-body code with self-gravity,…
▽ More
About 10% of the observed asteroids have rotational periods lower than P = 3 h and they seem to be relatively close to the spin barrier. Yet, the rotation has often been neglected in simulations of asteroid collisions. To determine the effect of rotation, we perform a large number of SPH/N-body impact simulations with rotating targets. We developed a new unified SPH/N-body code with self-gravity, suitable for simulations of both fragmentation phase and gravitational reaccumulation. The code has been verified against previous ones (Benz and Asphaug 1994), but we also tested new features, e.g. rotational stability, tensile stability, etc. Using the new code, we ran simulations with D_pb = 10 km and 100 km monolithic targets and compared synthetic asteroid families created by these impacts with families corresponding to non-rotating targets. The rotation affects mostly cratering events at oblique impact angles. The total mass ejected by these collision can be up to five times larger for rotating targets. We further compute the transfer of the angular momentum and determine conditions under which impacts accelerate or decelerate the target. While individual cratering collisions can cause both acceleration and deceleration, the deceleration prevails on average, collisions thus cause a systematic spin-down of asteroid population.
△ Less
Submitted 8 August, 2019;
originally announced August 2019.
-
Fragment properties from large-scale asteroid collisions: I: Results from SPH/N-body simulations using porous parent bodies and improved material models
Authors:
Martin Jutzi,
Patrick Michel,
Derek C. Richardson
Abstract:
Understanding the collisional fragmentation and subsequent reaccumulation of fragments is crucial for studies of the formation and evolution of the small-body populations. Using an SPH / N-body approach, we investigate the size-frequency distributions (SFDs) resulting from the disruption of 100 km-diameter targets consisting of porous material, including the effects of pore-crushing as well as fri…
▽ More
Understanding the collisional fragmentation and subsequent reaccumulation of fragments is crucial for studies of the formation and evolution of the small-body populations. Using an SPH / N-body approach, we investigate the size-frequency distributions (SFDs) resulting from the disruption of 100 km-diameter targets consisting of porous material, including the effects of pore-crushing as well as friction. Overall, the porous targets have a significantly higher impact strength (Q*D) than the rubble-pile parent bodies investigated previously (Benavidez et al., 2012) and show a behavior more similar to non-porous monolithic targets (Durda et al., 2007). Our results also confirm that for a given specific impact energy, the SFDs resulting from a parent body disruption are strongly dependent on the size scale.
△ Less
Submitted 10 August, 2018;
originally announced August 2018.
-
The peculiar shapes of Saturn's small inner moons as evidence of mergers of similar-sized moonlets
Authors:
Adrien Leleu,
Martin Jutzi,
Martin Rubin
Abstract:
The Cassini spacecraft revealed the spectacular, highly irregular shapes of the small inner moons of Saturn, ranging from the unique "ravioli-like" forms of Pan and Atlas to the highly elongated structure of Prometheus. Closest to Saturn, these bodies provide important clues regarding the formation process of small moons in close orbits around their host planet, but their range of irregular shapes…
▽ More
The Cassini spacecraft revealed the spectacular, highly irregular shapes of the small inner moons of Saturn, ranging from the unique "ravioli-like" forms of Pan and Atlas to the highly elongated structure of Prometheus. Closest to Saturn, these bodies provide important clues regarding the formation process of small moons in close orbits around their host planet, but their range of irregular shapes has not been explained yet. Here we show that the spectrum of shapes among Saturn's small moons is a natural outcome of merging collisions among similar-sized moonlets possessing physical properties and orbits that are consistent with those of the current moons. A significant fraction of such merging collisions take place either at the first encounter or after 1-2 hit-and-run events, with impact velocities in the range of 1-5 times the mutual escape velocity. Close to head-on mergers result in flattened objects with large equatorial ridges, as observed on Atlas and Pan. With slightly more oblique impact angles, collisions lead to elongated, Prometheus-like shapes. These results suggest that the current forms of the small moons provide direct evidence of the processes at the final stages of their formation, involving pairwise encounters of moonlets of comparable size. Finally, we show that this mechanism may also explain the formation of Iapetus' equatorial ridge, as well as its oblate shape.
△ Less
Submitted 22 May, 2018;
originally announced May 2018.
-
The late accretion and erosion of Vesta's crust recorded by eucrites and diogenites as an astrochemical window into the formation of Jupiter and the early evolution of the Solar System
Authors:
D. Turrini,
V. Svetsov,
G. Consolmagno,
S. Sirono,
M. Jutzi
Abstract:
For decades the limited thickness of Vesta's basaltic crust, revealed by the link between the asteroid and the howardite-eucrite-diogenite family of meteorites, and its survival to collisional erosion offered an important constraint for the study of the early evolution of the Solar System. Some results of the Dawn mission, however, cast doubts on our understanding of Vesta's interior composition a…
▽ More
For decades the limited thickness of Vesta's basaltic crust, revealed by the link between the asteroid and the howardite-eucrite-diogenite family of meteorites, and its survival to collisional erosion offered an important constraint for the study of the early evolution of the Solar System. Some results of the Dawn mission, however, cast doubts on our understanding of Vesta's interior composition and of the characteristics of its basaltic crust, weakening this classical constraint. In this work we investigate the late accretion and erosion experienced by Vesta's crust after its differentiation and recorded in the composition of eucrites and diogenites and show that it offers an astrochemical window into the earliest evolution of the Solar System. In our proof-of-concept case study focusing on the late accretion and erosion of Vesta's crust during the growth and migration of Jupiter, the water enrichment of eucrites appears to be a sensitive function of Jupiter's migration while the enrichment in highly-siderophile elements of diogenites appears to be particularly sensitive to the size-frequency distribution of the planetesimals. The picture depicted by the enrichments created by late accretion in eucrites and diogenites is not qualitatively affected by the uncertainty on the primordial mass of Vesta. Crustal erosion, instead, is more significantly affected by said uncertainty and Vesta's crust survival appears to be mainly useful to study violent collisional scenarios where highly energetic impacts can strip significant amounts of vestan material while limitedly contributing to Vesta's late accretion. Our results suggest that the astrochemical record of the late accretion and erosion of Vesta's crust provided by eucrites and diogenites can be used as a tool to investigate any process or scenario associated to the evolution of primordial Vesta and of the early Solar System.
△ Less
Submitted 17 April, 2018;
originally announced April 2018.
-
Asteroid Ryugu Before the Hayabusa2 Encounter
Authors:
Koji Wada,
Matthias Grott,
Patrick Michel,
Kevin J. Walsh,
Antonella M. Barucci,
Jens Biele,
Jürgen Blum,
Carolyn M. Ernst,
Jan T. Grundmann,
Bastian Gundlach,
Axel Hagermann,
Maximilian Hamm,
Martin Jutzi,
Myung-Jin Kim,
Ekkehard Kührt,
Lucille Le Corre,
Guy Libourel,
Roy Lichtenheldt,
Alessandro Maturilli,
Scott R. Messenger,
Tatsuhiro Michikami,
Hideaki Miyamoto,
Stefano Mottola,
Akiko M. Nakamura,
Thomas Müller
, et al. (9 additional authors not shown)
Abstract:
Asteroid (162173) Ryugu is the target object of Hayabusa2, an asteroid exploration and sample return mission led by Japan Aerospace Exploration Agency (JAXA). Ground-based observations indicate that Ryugu is a C-type near-Earth asteroid with a diameter of less than 1 km, but the knowledge of its detailed properties is still very limited. This paper summarizes our best understanding of the physical…
▽ More
Asteroid (162173) Ryugu is the target object of Hayabusa2, an asteroid exploration and sample return mission led by Japan Aerospace Exploration Agency (JAXA). Ground-based observations indicate that Ryugu is a C-type near-Earth asteroid with a diameter of less than 1 km, but the knowledge of its detailed properties is still very limited. This paper summarizes our best understanding of the physical and dynamical properties of Ryugu based on remote sensing and theoretical modeling. This information is used to construct a design reference model of the asteroid that is used for formulation of mission operations plans in advance of asteroid arrival. Particular attention is given to the surface properties of Ryugu that are relevant to sample acquisition. This reference model helps readers to appropriately interpret the data that will be directly obtained by Hayabusa2 and promotes scientific studies not only for Ryugu itself and other small bodies but also for the Solar System evolution that small bodies shed light on.
△ Less
Submitted 10 April, 2018;
originally announced April 2018.
-
An Impacting Descent Probe for Europa and the other Galilean Moons of Jupiter
Authors:
P. Wurz,
D. Lasi,
N. Thomas,
D. Piazza,
A. Galli,
M. Jutzi,
S. Barabash,
M. Wieser,
W. Magnes,
H. Lammer,
U. Auster,
L. I. Gurvits,
W. Hajdas
Abstract:
We present a study of an impacting descent probe that increases the science return of spacecraft orbiting or passing an atmosphere-less planetary body of the solar system, such as the Galilean moons of Jupiter. The descent probe is a carry-on small spacecraft (< 100 kg), to be deployed by the mother spacecraft, that brings itself onto a collisional trajectory with the targeted planetary body in a…
▽ More
We present a study of an impacting descent probe that increases the science return of spacecraft orbiting or passing an atmosphere-less planetary body of the solar system, such as the Galilean moons of Jupiter. The descent probe is a carry-on small spacecraft (< 100 kg), to be deployed by the mother spacecraft, that brings itself onto a collisional trajectory with the targeted planetary body in a simple manner. A possible science payload includes instruments for surface imaging, characterisation of the neutral exosphere, and magnetic field and plasma measurement near the target body down to very low-altitudes (~1 km), during the probe's fast (~km/s) descent to the surface until impact. The science goals and the concept of operation are discussed with particular reference to Europa, including options for flying through water plumes and after-impact retrieval of very-low altitude science data. All in all, it is demonstrated how the descent probe has the potential to provide a high science return to a mission at a low extra level of complexity, engineering effort, and risk. This study builds upon earlier studies for a Callisto Descent Probe (CDP) for the former Europa-Jupiter System Mission (EJSM) of ESA and NASA, and extends them with a detailed assessment of a descent probe designed to be an additional science payload for the NASA Europa Mission.
△ Less
Submitted 7 November, 2017;
originally announced November 2017.
-
Coupling SPH and thermochemical models of planets: Methodology and example of a Mars-sized body
Authors:
Gregor J. Golabek,
Alexandre Emsenhuber,
Martin Jutzi,
Erik I. Asphaug,
Taras V. Gerya
Abstract:
Giant impacts have been suggested to explain various characteristics of terrestrial planets and their moons. However, so far in most models only the immediate effects of the collisions have been considered, while the long-term interior evolution of the impacted planets was not studied. Here we present a new approach, combining 3-D shock physics collision calculations with 3-D thermochemical interi…
▽ More
Giant impacts have been suggested to explain various characteristics of terrestrial planets and their moons. However, so far in most models only the immediate effects of the collisions have been considered, while the long-term interior evolution of the impacted planets was not studied. Here we present a new approach, combining 3-D shock physics collision calculations with 3-D thermochemical interior evolution models. We apply the combined methods to a demonstration example of a giant impact on a Mars-sized body, using typical collisional parameters from previous studies. While the material parameters (equation of state, rheology model) used in the impact simulations can have some effect on the long-term evolution, we find that the impact angle is the most crucial parameter for the resulting spatial distribution of the newly formed crust. The results indicate that a dichotomous crustal pattern can form after a head-on collision, while this is not the case when considering a more likely grazing collision. Our results underline that end-to-end 3-D calculations of the entire process are required to study in the future the effects of large-scale impacts on the evolution of planetary interiors.
△ Less
Submitted 9 October, 2017;
originally announced October 2017.
-
SPH calculations of Mars-scale collisions: the role of the Equation of State, material rheologies, and numerical effects
Authors:
Alexandre Emsenhuber,
Martin Jutzi,
Willy Benz
Abstract:
We model large-scale ($\approx$2000km) impacts on a Mars-like planet using a Smoothed Particle Hydrodynamics code. The effects of material strength and of using different Equations of State on the post-impact material and temperature distributions are investigated. The properties of the ejected material in terms of escaping and disc mass are analysed as well. We also study potential numerical effe…
▽ More
We model large-scale ($\approx$2000km) impacts on a Mars-like planet using a Smoothed Particle Hydrodynamics code. The effects of material strength and of using different Equations of State on the post-impact material and temperature distributions are investigated. The properties of the ejected material in terms of escaping and disc mass are analysed as well. We also study potential numerical effects in the context of density discontinuities and rigid body rotation. We find that in the large-scale collision regime considered here (with impact velocities of 4km/s), the effect of material strength is substantial for the post-impact distribution of the temperature and the impactor material, while the influence of the Equation of State is more subtle and present only at very high temperatures.
△ Less
Submitted 9 October, 2017;
originally announced October 2017.
-
Relevance of Tidal Heating on Large TNOs
Authors:
Prabal Saxena,
Joe Renaud,
Wade G. Henning,
Martin Jutzi,
Terry Hurford
Abstract:
We examine the relevance of tidal heating for large Trans-Neptunian Objects, with a focus on its potential to melt and maintain layers of subsurface liquid water. Depending on their past orbital evolution, tidal heating may be an important part of the heat budget for a number of discovered and hypothetical TNO systems and may enable formation of, and increased access to, subsurface liquid water. T…
▽ More
We examine the relevance of tidal heating for large Trans-Neptunian Objects, with a focus on its potential to melt and maintain layers of subsurface liquid water. Depending on their past orbital evolution, tidal heating may be an important part of the heat budget for a number of discovered and hypothetical TNO systems and may enable formation of, and increased access to, subsurface liquid water. Tidal heating induced by the process of despinning is found to be particularly able to compete with heating due to radionuclide decay in a number of different scenarios. In cases where radiogenic heating alone may establish subsurface conditions for liquid water, we focus on the extent by which tidal activity lifts the depth of such conditions closer to the surface. While it is common for strong tidal heating and long lived tides to be mutually exclusive, we find this is not always the case, and highlight when these two traits occur together.
△ Less
Submitted 14 June, 2017;
originally announced June 2017.
-
Formation of bi-lobed shapes by sub-catastrophic collisions: A late origin of comet 67P/C-G's structure
Authors:
M. Jutzi,
W. Benz
Abstract:
The origin of the particular shape of a small body like comet 67P/Churyumov-Gerasimenko (67P/C-G) is a topic of active research. How and when it acquired its peculiar characteristics has distinct implications on the origin of the solar system and its dynamics. We investigate how shapes like the one of comet 67P/C-G can result from a new type of low-energy, sub-catastrophic impacts involving elonga…
▽ More
The origin of the particular shape of a small body like comet 67P/Churyumov-Gerasimenko (67P/C-G) is a topic of active research. How and when it acquired its peculiar characteristics has distinct implications on the origin of the solar system and its dynamics. We investigate how shapes like the one of comet 67P/C-G can result from a new type of low-energy, sub-catastrophic impacts involving elongated, rotating bodies. We focus on parameters potentially leading to bi-lobed structures. We also estimate the probability for such structures to survive subsequent impacts. We use a smooth particle hydrodynamics (SPH) shock physics code to model the impacts, the subsequent reaccumulation of material and the reconfiguration into a stable final shape. The energy increase as well as the degree of compaction of the resulting bodies are tracked in the simulations. Our modelling results suggest that the formation of bi-lobed structures like 67P/C-G is a natural outcome of the low energy, sub-catastrophic collisions considered here. Sub-catastrophic impacts have the potential to alter the shape of a small body significantly, without leading to major heating or compaction. The currently observed shapes of cometary nuclei, such as 67P/C-G, maybe a result of such a last major shape forming impact.
△ Less
Submitted 8 November, 2016;
originally announced November 2016.
-
How primordial is the structure of comet 67P/C-G? Combined collisional and dynamical models suggest a late formation
Authors:
M. Jutzi,
W. Benz,
A. Toliou,
A. Morbidelli,
R. Brasser
Abstract:
There is an active debate about whether the properties of comets as observed today are primordial or, alternatively, if they are a result of collisional evolution or other processes. We investigate the effects of collisions on a comet with a structure like 67P/C-G. We develop scaling laws for the critical specific impact energies required for a significant shape alteration. These are then used in…
▽ More
There is an active debate about whether the properties of comets as observed today are primordial or, alternatively, if they are a result of collisional evolution or other processes. We investigate the effects of collisions on a comet with a structure like 67P/C-G. We develop scaling laws for the critical specific impact energies required for a significant shape alteration. These are then used in simulations of the combined dynamical and collisional evolution of comets in order to study the survival probability of a primordially formed object with a shape like 67P/C-G. The effects of impacts on comet 67P/C-G are studied using a SPH shock physics code. The resulting critical specific impact energy defines a minimal projectile size which is used to compute the number of shape-changing collisions in a set of dynamical simulations. These simulations follow the dispersion of the trans-Neptunian disk during the giant planet instability, the formation of a scattered disk, and produce 87 objects that penetrate into the inner solar system with orbits consistent with the observed JFC population. The collisional evolution before the giant planet instability is not considered here. Hence, our study is conservative in its estimation of the number of collisions. We find that in any scenario considered here, comet 67P/C-G would have experienced a significant number of shape-changing collisions, if it formed primordially. This is also the case for generic bi-lobe shapes. Our study also shows that impact heating is very localized and that collisionally processed bodies can still have a high porosity. Our study indicates that the observed bi-lobe structure of comet 67P/C-G may not be primordial, but might have originated in a rather recent event, possibly within the last 1 Gy. This may be the case for any kilometer-sized two-component cometary nuclei.
△ Less
Submitted 8 November, 2016;
originally announced November 2016.
-
Small-body deflection techniques using spacecraft: techniques in simulating the fate of ejecta
Authors:
Stephen R. Schwartz,
Yang Yu,
Patrick Michel,
Martin Jutzi
Abstract:
We define a set of procedures to numerically study the fate of ejecta produced by the impact of an artificial projectile with the aim of deflecting an asteroid. Here we develop a simplified, idealized model of impact conditions that can be adapted to fit the details of specific deflection-test scenarios, such as what is being proposed for the AIDA project. Ongoing studies based upon the methodolog…
▽ More
We define a set of procedures to numerically study the fate of ejecta produced by the impact of an artificial projectile with the aim of deflecting an asteroid. Here we develop a simplified, idealized model of impact conditions that can be adapted to fit the details of specific deflection-test scenarios, such as what is being proposed for the AIDA project. Ongoing studies based upon the methodology described here can be used to inform observational strategies and safety conditions for an observing spacecraft. To account for ejecta evolution, the numerical strategies we are employing are varied and include a large N-Body component, a smoothed-particle hydrodynamics (SPH) component, and an application of impactor scaling laws. Simulations that use SPH-derived initial conditions show high-speed ejecta escaping at low angles of inclination, and very slowly moving ejecta lofting off the surface at higher inclination angles, some of which re-impacts the small-body surface. We are currently investigating the realism of this and other models' behaviors. Next steps will include the addition of solar perturbations to the model and applying the protocol developed here directly to specific potential mission concepts such as the proposed AIDA scenario.
△ Less
Submitted 21 January, 2016;
originally announced January 2016.
-
Global Scale Impacts
Authors:
Erik Asphaug,
Gareth Collins,
Martin Jutzi
Abstract:
Global scale impacts modify the physical or thermal state of a substantial fraction of a target asteroid. Specific effects include accretion, family formation, reshaping, mixing and layering, shock and frictional heating, fragmentation, material compaction, dilatation, stripping of mantle and crust, and seismic degradation. Deciphering the complicated record of global scale impacts, in asteroids a…
▽ More
Global scale impacts modify the physical or thermal state of a substantial fraction of a target asteroid. Specific effects include accretion, family formation, reshaping, mixing and layering, shock and frictional heating, fragmentation, material compaction, dilatation, stripping of mantle and crust, and seismic degradation. Deciphering the complicated record of global scale impacts, in asteroids and meteorites, will lead us to understand the original planet-forming process and its resultant populations, and their evolution in time as collisions became faster and fewer. We provide a brief overview of these ideas, and an introduction to models.
△ Less
Submitted 9 April, 2015;
originally announced April 2015.
-
Collisional Formation and Modeling of Asteroid Families
Authors:
Patrick Michel,
Derek C. Richardson,
Daniel D. Durda,
Martin Jutzi,
Erik Asphaug
Abstract:
In the last decade, thanks to the development of sophisticated numerical codes, major breakthroughs have been achieved in our understanding of the formation of asteroid families by catastrophic disruption of large parent bodies. In this review, we describe numerical simulations of asteroid collisions that reproduced the main properties of families, accounting for both the fragmentation of an aster…
▽ More
In the last decade, thanks to the development of sophisticated numerical codes, major breakthroughs have been achieved in our understanding of the formation of asteroid families by catastrophic disruption of large parent bodies. In this review, we describe numerical simulations of asteroid collisions that reproduced the main properties of families, accounting for both the fragmentation of an asteroid at the time of impact and the subsequent gravitational interactions of the generated fragments. The simulations demonstrate that the catastrophic disruption of bodies larger than a few hundred meters in diameter leads to the formation of large aggregates due to gravitational reaccumulation of smaller fragments, which helps explain the presence of large members within asteroid families. Thus, for the first time, numerical simulations successfully reproduced the sizes and ejection velocities of members of representative families. Moreover, the simulations provide constraints on the family dynamical histories and on the possible internal structure of family members and their parent bodies.
△ Less
Submitted 13 February, 2015;
originally announced February 2015.
-
SPH calculations of asteroid disruptions: The role of pressure dependent failure models
Authors:
Martin Jutzi
Abstract:
We present recent improvements of the modeling of the disruption of strength dominated bodies using the Smooth Particle Hydrodynamics (SPH) technique. The improvements include an updated strength model and a friction model, which are successfully tested by a comparison with laboratory experiments. In the modeling of catastrophic disruptions of asteroids, a comparison between old and new strength m…
▽ More
We present recent improvements of the modeling of the disruption of strength dominated bodies using the Smooth Particle Hydrodynamics (SPH) technique. The improvements include an updated strength model and a friction model, which are successfully tested by a comparison with laboratory experiments. In the modeling of catastrophic disruptions of asteroids, a comparison between old and new strength models shows no significant deviation in the case of targets which are initially non-porous, fully intact and have a homogeneous structure (such as the targets used in the study by Benz&Asphaug (1999). However, for many cases (e.g. initially partly or fully damaged targets, rubble-pile structures, etc.) we find that it is crucial that friction is taken into account and the material has a pressure dependent shear strength. Our investigations of the catastrophic disruption threshold $Q^*_{D}$ as a function of target properties and target sizes up to a few 100 km show that a fully damaged target modeled without friction has a $Q^*_{D}$ which is significantly (5-10 times) smaller than in the case where friction is included. When the effect of the energy dissipation due to compaction (pore crushing) is taken into account as well, the targets become even stronger ($Q^*_{D}$ is increased by a factor of 2-3). On the other hand, cohesion is found to have an negligible effect at large scales and is only important at scales $\lesssim$ 1km. Our results show the relative effects of strength, friction and porosity on the outcome of collisions among small ($\lesssim$ 1000 km) bodies. These results will be used in a future study to improve existing scaling laws for the outcome of collisions (e.g. Leinhardt&Stewart, 2012).
△ Less
Submitted 6 February, 2015;
originally announced February 2015.
-
Modeling asteroid collisions and impact processes
Authors:
Martin Jutzi,
Keith Holsapple,
Kai Wünneman,
Patrick Michel
Abstract:
As a complement to experimental and theoretical approaches, numerical modeling has become an important component to study asteroid collisions and impact processes. In the last decade, there have been significant advances in both computational resources and numerical methods. We discuss the present state-of-the-art numerical methods and material models used in "shock physics codes" to simulate impa…
▽ More
As a complement to experimental and theoretical approaches, numerical modeling has become an important component to study asteroid collisions and impact processes. In the last decade, there have been significant advances in both computational resources and numerical methods. We discuss the present state-of-the-art numerical methods and material models used in "shock physics codes" to simulate impacts and collisions and give some examples of those codes. Finally, recent modeling studies are presented, focussing on the effects of various material properties and target structures on the outcome of a collision.
△ Less
Submitted 19 February, 2015; v1 submitted 6 February, 2015;
originally announced February 2015.
-
Fragment properties at the catastrophic disruption threshold: The effect of the parent body's internal structure
Authors:
Martin Jutzi,
Patrick Michel,
Willy Benz,
Derek C. Richardson
Abstract:
Numerical simulations of asteroid break-ups, including both the fragmentation of the parent body and the gravitational interactions between the fragments, have allowed us to reproduce successfully the main properties of asteroid families formed in different regimes of impact energy, starting from a non-porous parent body. In this paper, using the same approach, we concentrate on a single regime…
▽ More
Numerical simulations of asteroid break-ups, including both the fragmentation of the parent body and the gravitational interactions between the fragments, have allowed us to reproduce successfully the main properties of asteroid families formed in different regimes of impact energy, starting from a non-porous parent body. In this paper, using the same approach, we concentrate on a single regime of impact energy, the so-called catastrophic threshold usually designated by Q*D, which results in the escape of half of the target's mass. Thanks to our recent implementation of a model of fragmentation of porous materials, we can characterize Q*D for both porous and non-porous targets with a wide range of diameters. We can then analyze the potential influence of porosity on the value of Q*D, and by computing the gravitational phase of the collision in the gravity regime, we can characterize the collisional outcome in terms of the fragment size and ejection speed distributions, which are the main outcome properties used by collisional models to study the evolutions of the different populations of small bodies. We also check the dependency of Q*D on the impact speed of the projectile. In the strength regime, which corresponds to target sizes below a few hundreds of meters, we find that porous targets are more difficult to disrupt than non-porous ones. In the gravity regime, the outcome is controlled purely by gravity and porosity in the case of porous targets. In the case of non-porous targets, the outcome also depends on strength. We then propose some power-law relationships between Q*D and both target's size and impact speed that can be used in collisional evolution models.
△ Less
Submitted 19 November, 2009;
originally announced November 2009.
-
Numerical simulations of impacts involving porous bodies: I. Implementing sub-resolution porosity in a 3D SPH Hydrocode
Authors:
M. Jutzi,
W. Benz,
P. Michel
Abstract:
In this paper, we extend our Smooth Particle Hydrodynamics (SPH) impact code to include the effect of porosity at a sub-resolution scale by adapting the so-called $P-alpha$ model. Many small bodies in the different populations of asteroids and comets are believed to contain a high degree of porosity and the determination of both their collisional evolution and the outcome of their disruption req…
▽ More
In this paper, we extend our Smooth Particle Hydrodynamics (SPH) impact code to include the effect of porosity at a sub-resolution scale by adapting the so-called $P-alpha$ model. Many small bodies in the different populations of asteroids and comets are believed to contain a high degree of porosity and the determination of both their collisional evolution and the outcome of their disruption requires that the effect of porosity is taken into account in the computation of those processes. Here, we present our model and show how porosity interfaces with the elastic-perfectly plastic material description and the brittle fracture model generally used to simulate the fragmentation of non-porous rocky bodies. We investigate various compaction models and discuss their suitability to simulate the compaction of (highly) porous material. Then, we perform simple test cases where we compare results of the simulations to the theoretical solutions. We also present a Deep Impact-like simulation to show the effect of porosity on the outcome of an impact. Detailed validation tests will be presented in a next paper by comparison with high-velocity laboratory experiments on porous materials (Jutzi et al., in preparation). Once validated at small scales, our new impact code can then be used at larger scales to study impacts and collisions involving brittle solids including porosity, such as the parent bodies of C-type asteroid families or cometary materials, both in the strength- and in the gravity-dominated regime.
△ Less
Submitted 8 July, 2008;
originally announced July 2008.