-
What is the SKA-Low Sensitivity for Your Favourite Radio Source ?
Authors:
M. Sokolowski,
S. J. Tingay,
D. B. Davidson,
R. B. Wayth,
D. Ung,
J. W. Broderick,
B. Juswardy,
M. Kovaleva,
G. Macario,
G. Pupillo,
A. Sutinjo
Abstract:
The SKA will be the largest radio astronomy observatory ever built, providing unprecedented sensitivity over a very broad frequency (50 MHz to 15.3 GHz). The SKA-Low (50 - 350 MHz), will be built at the MRO in Western Australia. It will consist of 512 stations each composed of 256 dual-polarised antennas, and the sensitivity of an individual station is pivotal to the performance of the entire SKA-…
▽ More
The SKA will be the largest radio astronomy observatory ever built, providing unprecedented sensitivity over a very broad frequency (50 MHz to 15.3 GHz). The SKA-Low (50 - 350 MHz), will be built at the MRO in Western Australia. It will consist of 512 stations each composed of 256 dual-polarised antennas, and the sensitivity of an individual station is pivotal to the performance of the entire SKA-Low telescope. The answer to the question in the title is, it depends. The sensitivity of a low frequency array, such as an SKA-Low station, depends strongly on the pointing direction of the digitally formed station beam and the local sidereal time (LST), and is different for the two orthogonal polarisations of the antennas. The accurate prediction of the SKA-Low sensitivity in an arbitrary direction in the sky is crucial for future observation planning. We present here a sensitivity calculator for the SKA-Low radio telescope, using a database of pre-computed sensitivity values for two realisations of an SKA-Low station architecture. One realisation uses the log-periodic antennas selected for SKA-Low. The second uses a known benchmark, in the form of the bowtie dipoles of the MWA. Data collected by both stations (deployed at the MRO in 2019) were used to measure their sensitivity at selected frequencies and over at least 24 h intervals, and were compared to the predictions described in this paper. The sensitivity values stored in the SQLite database were pre-computed for the X, Y and Stokes I polarisations in 10 MHz frequency steps, 0.5 hour LST intervals, and 5 degree resolution in pointing directions. The database allows users to estimate the sensitivity of SKA-Low for their favourite object using interactive web-based or command line interface, which can also calculate the sensitivity for arbitrary pointing directions, frequencies, and times without interpolations.
△ Less
Submitted 12 April, 2022;
originally announced April 2022.
-
Imaging the Southern Sky at 159MHz using Spherical Harmonics with the Engineering Development Array 2
Authors:
Michael A. Kriele,
Randall B. Wayth,
Mark J. Bentum,
Budi Juswardy,
Cathryn M. Trott
Abstract:
One of the major priorities of international radio astronomy is to study the early universe through the detection of the 21 cm HI line from the epoch of reionisation (EoR). Due to the weak nature of the 21 cm signal, an important part in the detection of the EoR is removing contaminating foregrounds from our observations as they are multiple orders of magnitude brighter. In order to achieve this,…
▽ More
One of the major priorities of international radio astronomy is to study the early universe through the detection of the 21 cm HI line from the epoch of reionisation (EoR). Due to the weak nature of the 21 cm signal, an important part in the detection of the EoR is removing contaminating foregrounds from our observations as they are multiple orders of magnitude brighter. In order to achieve this, sky maps spanning a wide range of frequencies and angular scales are required for calibration and foreground subtraction. Complementing the existing low-frequency sky maps, we have constructed a Southern Sky map through spherical harmonic transit interferometry utilising the engineering development array 2 (EDA2), a square kilometre array (SKA) low-frequency array prototype system. We use the m-mode formalism to create an all-sky map at 159MHz with an angular resolution of 3 degrees, with data from the (EDA2) providing information over +60 degrees to -90 degrees in declination. We also introduce a new method for visualising and quantifying how the baseline distribution of an interferometer maps to the spherical harmonics, and discuss how prior information can be used to constrain spherical harmonic components that the interferometer is not sensitive to.
△ Less
Submitted 11 January, 2022;
originally announced January 2022.
-
The Engineering Development Array 2: design, performance and lessons from an SKA-Low prototype station
Authors:
Randall Wayth,
Marcin Sokolowski,
Jess Broderick,
Steven J. Tingay,
Raunaq Bhushan,
Tom Booler,
Riccardo Chiello,
David B. Davidson,
David Emrich,
Budi Juswardy,
David Kenney,
Giulia Macario,
Alessio Magro,
Andrea Mattana,
David Minchin,
Jader Monari,
Andrew McPhail,
Federico Perini,
Giuseppe Pupillo,
Marco Schiaffino,
Ravi Subrahmanya,
Andre van Es,
Mia Walker,
Mark Waterson
Abstract:
We present the Engineering Development Array 2, which is one of two instruments built as a second generation prototype station for the future Square Kilometre Array Low Frequency Array. The array is comprised of 256 dual-polarization dipole antennas that can work as a phased array or as a standalone interferometer. We describe the design of the array and the details of design changes from previous…
▽ More
We present the Engineering Development Array 2, which is one of two instruments built as a second generation prototype station for the future Square Kilometre Array Low Frequency Array. The array is comprised of 256 dual-polarization dipole antennas that can work as a phased array or as a standalone interferometer. We describe the design of the array and the details of design changes from previous generation instruments, as well as the motivation for the changes. Using the array as an imaging interferometer, we measure the sensitivity of the array at five frequencies ranging from 70 to 320 MHz.
△ Less
Submitted 1 December, 2021;
originally announced December 2021.
-
The Aperture Array Verification System 1: System overview and early commissioning results
Authors:
P. Benthem,
R. Wayth,
E. de Lera Acedo,
K. Zarb Adami,
M. Alderighi,
C. Belli,
P. Bolli,
T. Booler,
J. Borg,
J. W. Broderick,
S. Chiarucci,
R. Chiello,
L. Ciani,
G. Comoretto,
B. Crosse,
D. Davidson,
A. DeMarco,
D. Emrich,
A. van Es,
D. Fierro,
A. Faulkner,
M. Gerbers,
N. Razavi-Ghods,
P. Hall,
L. Horsley
, et al. (29 additional authors not shown)
Abstract:
The design and development process for the Square Kilometre Array (SKA) radio telescope, the Low Frequency Aperture Array component, was progressed during the SKA pre-construction phase by an international consortium, with the goal of meeting requirements for a critical design review. As part of the development process a full-sized prototype SKA Low station was deployed, the Aperture Array Verific…
▽ More
The design and development process for the Square Kilometre Array (SKA) radio telescope, the Low Frequency Aperture Array component, was progressed during the SKA pre-construction phase by an international consortium, with the goal of meeting requirements for a critical design review. As part of the development process a full-sized prototype SKA Low station was deployed, the Aperture Array Verification System 1 (AAVS1). We provide a system overview and describe the commissioning results of AAVS1, which is a low frequency radio telescope with 256 dual-polarisation log-periodic dipole antennas working as a phased array. A detailed system description is provided, including an in-depth overview of relevant sub-systems, ranging from hardware, firmware, software, calibration,and control sub-systems. Early commissioning results cover initial bootstrapping, array calibration, stability testing, beam-forming,and on-sky sensitivity validation. Lessons learned are presented, along with future developments.
△ Less
Submitted 7 October, 2021;
originally announced October 2021.
-
Cold-Source Noise Measurement of a Differential Input Single-Ended Output Low-Noise Amplifier Connected to a Low-Frequency Radio Astronomy Antenna
Authors:
Adrian Sutinjo,
Daniel Ung,
Budi Juswardy
Abstract:
We present two methods for measuring the noise temperature of a differential input single-ended output (DISO) Low-Noise Amplifier (LNA) connected to an antenna. The first method is direct measurement of the DISO LNA and antenna in an anechoic chamber at ambient temperature. The second is a simple and low-cost noise parameter extraction of the DISO device using a coaxial long cable. The reconstruct…
▽ More
We present two methods for measuring the noise temperature of a differential input single-ended output (DISO) Low-Noise Amplifier (LNA) connected to an antenna. The first method is direct measurement of the DISO LNA and antenna in an anechoic chamber at ambient temperature. The second is a simple and low-cost noise parameter extraction of the DISO device using a coaxial long cable. The reconstruction of the DISO noise parameter from the noise wave measurements of the DISO LNA with one terminated input port is discussed in detail. We successfully applied these methods to the Murchison Widefield Array LNA and antenna.
△ Less
Submitted 28 June, 2018;
originally announced June 2018.
-
The Engineering Development Array: A low frequency radio telescope utilising SKA precursor technology
Authors:
Randall Wayth,
Marcin Sokolowski,
Tom Booler,
Brian Crosse,
David Emrich,
Robert Grootjans,
Peter J. Hall,
Luke Horsley,
Budi Juswardy,
David Kenney,
Kim Steele,
Adrian Sutinjo,
Steven J. Tingay,
Daniel Ung,
Mia Walker,
Andrew Williams,
A. Beardsley,
T. M. O. Franzen,
M. Johnston-Hollitt,
D. L. Kaplan,
M. F. Morales,
D. Pallot,
C. M. Trott,
C. Wu
Abstract:
We describe the design and performance of the Engineering Development Array (EDA), which is a low frequency radio telescope comprising 256 dual-polarisation dipole antennas working as a phased-array. The EDA was conceived of, developed, and deployed in just 18 months via re-use of Square Kilometre Array (SKA) precursor technology and expertise, specifically from the Murchison Widefield Array (MWA)…
▽ More
We describe the design and performance of the Engineering Development Array (EDA), which is a low frequency radio telescope comprising 256 dual-polarisation dipole antennas working as a phased-array. The EDA was conceived of, developed, and deployed in just 18 months via re-use of Square Kilometre Array (SKA) precursor technology and expertise, specifically from the Murchison Widefield Array (MWA) radio telescope. Using drift scans and a model for the sky brightness temperature at low frequencies, we have derived the EDA's receiver temperature as a function of frequency. The EDA is shown to be sky-noise limited over most of the frequency range measured between 60 and 240 MHz. By using the EDA in interferometric mode with the MWA, we used calibrated visibilities to measure the absolute sensitivity of the array. The measured array sensitivity matches very well with a model based on the array layout and measured receiver temperature. The results demonstrate the practicality and feasibility of using MWA-style precursor technology for SKA-scale stations. The modular architecture of the EDA allows upgrades to the array to be rolled out in a staged approach. Future improvements to the EDA include replacing the second stage beamformer with a fully digital system, and to transition to using RF-over-fibre for the signal output from first stage beamformers.
△ Less
Submitted 11 July, 2017;
originally announced July 2017.
-
Characterization of a Low-Frequency Radio Astronomy Prototype Array in Western Australia
Authors:
A. T. Sutinjo,
T. M. Colegate,
R. B. Wayth,
P. J. Hall,
E. de Lera Acedo,
T. Booler,
A. J. Faulkner,
L. Feng,
N. Hurley-Walker,
B. Juswardy,
S. K. Padhi,
N. Razavi-Ghods,
M. Sokolowski,
S. J. Tingay,
J. G. Bij de Vaate
Abstract:
We report characterization results for an engineering prototype of a next-generation low-frequency radio astronomy array. This prototype, which we refer to as the Aperture Array Verification System 0.5 (AAVS0.5), is a sparse pseudo-random array of 16 log-periodic antennas designed for 70-450 MHz. It is co-located with the Murchison Widefield Array (MWA) at the Murchison Radioastronomy Observatory…
▽ More
We report characterization results for an engineering prototype of a next-generation low-frequency radio astronomy array. This prototype, which we refer to as the Aperture Array Verification System 0.5 (AAVS0.5), is a sparse pseudo-random array of 16 log-periodic antennas designed for 70-450 MHz. It is co-located with the Murchison Widefield Array (MWA) at the Murchison Radioastronomy Observatory (MRO) near the Australian Square Kilometre Array (SKA) core site. We characterize the AAVS0.5 using two methods: in-situ radio interferometry with astronomical sources and an engineering approach based on detailed full-wave simulation. In-situ measurement of the small prototype array is challenging due to the dominance of the Galactic noise and the relatively weaker calibration sources easily accessible in the southern sky. The MWA, with its 128 "tiles" and up to 3 km baselines, enabled in-situ measurement via radio interferometry. We present array sensitivity and beam pattern characterization results and compare to detailed full-wave simulation. We discuss areas where differences between the two methods exist and offer possibilities for improvement. Our work demonstrates the value of the dual astronomy-simulation approach in upcoming SKA design work.
△ Less
Submitted 6 October, 2015;
originally announced October 2015.
-
Antenna array characterization via radio interferometry observation of astronomical sources
Authors:
T. M. Colegate,
A. T. Sutinjo,
P. J. Hall,
S. K. Padhi,
R. B. Wayth,
J. G. Bij de Vaate,
B. Crosse,
D. Emrich,
A. J. Faulkner,
N. Hurley-Walker,
E. de Lera Acedo,
B. Juswardy,
N. Razavi-Ghods,
S. J. Tingay,
A. Williams
Abstract:
We present an in-situ antenna characterization method and results for a "low-frequency" radio astronomy engineering prototype array, characterized over the 75-300 MHz frequency range. The presence of multiple cosmic radio sources, particularly the dominant Galactic noise, makes in-situ characterization at these frequencies challenging; however, it will be shown that high quality measurement is pos…
▽ More
We present an in-situ antenna characterization method and results for a "low-frequency" radio astronomy engineering prototype array, characterized over the 75-300 MHz frequency range. The presence of multiple cosmic radio sources, particularly the dominant Galactic noise, makes in-situ characterization at these frequencies challenging; however, it will be shown that high quality measurement is possible via radio interferometry techniques. This method is well-known in the radio astronomy community but seems less so in antenna measurement and wireless communications communities, although the measurement challenges involving multiple undesired sources in the antenna field-of-view bear some similarities. We discuss this approach and our results with the expectation that this principle may find greater application in related fields.
△ Less
Submitted 20 January, 2015;
originally announced January 2015.