Showing 1–8 of 8 results for author: Huber, A I

CCAT: Detector Noise Limited Performance of the RFSoC-based Readout Electronics for mm/sub-mm/far-IR KIDs

Authors: Adrian K. Sinclair, James Burgoyne, Anthony I. Huber, Colin Murphy, Steve K. Choi, Cody J. Duell, Zachary B. Huber, Yaqiong Li, Scott C. Chapman, Michael D. Niemack, Thomas Nikola, Eve M. Vavagiakis, Samantha Walker, Jordan D. Wheeler, Jason Austermann, Lawrence Lin, Ruixuan Xie, Bugao Zou, Philip D. Mauskopf

Abstract: The Fred Young Submillimeter Telescope (FYST), on Cerro Chajnantor in the Atacama desert of Chile, will conduct wide-field and small deep-field surveys of the sky with more than 100,000 detectors on the Prime-Cam instrument. Kinetic inductance detectors (KIDs) were chosen as the primary sensor technology for their high density focal plane packing. Additionally, they benefit from low cost, ease of… ▽ More The Fred Young Submillimeter Telescope (FYST), on Cerro Chajnantor in the Atacama desert of Chile, will conduct wide-field and small deep-field surveys of the sky with more than 100,000 detectors on the Prime-Cam instrument. Kinetic inductance detectors (KIDs) were chosen as the primary sensor technology for their high density focal plane packing. Additionally, they benefit from low cost, ease of fabrication, and simplified cryogenic readout, which are all beneficial for successful deployment at scale. The cryogenic multiplexing complexity is pulled out of the cryostat and is instead pushed into the digital signal processing of the room temperature electronics. Using the Xilinx Radio Frequency System on a Chip (RFSoC), a highly multiplexed KID readout was developed for the first light Prime-Cam and commissioning Mod-Cam instruments. We report on the performance of the RFSoC-based readout with multiple detector arrays in various cryogenic setups. Specifically we demonstrate detector noise limited performance of the RFSoC-based readout under the expected optical loading conditions. △ Less

Submitted 21 June, 2024; originally announced June 2024.

Comments: draft submitted to SPIE

CCAT: Comparisons of 280 GHz TiN and Al Kinetic Inductance Detector Arrays

Authors: Cody J. Duell, Jason Austermann, James Beall, James R. Burgoyne, Scott C. Chapman, Steve K. Choi, Rodrigo G. Freundt, Jiansong Gao, Christopher Groppi, Anthony I. Huber, Zachary B. Huber, Johannes Hubmayr, Ben Keller, Yaqiong Li, Lawrence T. Lin, Justin Matthewson, Philip Mauskopf, Alicia Middleton, Colin C. Murphy, Michael D. Niemack, Thomas Nikola, Adrian K. Sinclair, Ema Smith, Jeff van Lanen, Anna Vaskuri , et al. (5 additional authors not shown)

Abstract: The CCAT Collaboration's six-meter Fred Young Submillimeter Telescope is scheduled to begin observing in the Chilean Atacama in 2025, targeting a variety of science goals throughout cosmic history. Prime-Cam is a 1.8-meter diameter cryostat that will host up to seven independent instrument modules designed for simultaneous spectroscopic and broadband, polarimetric surveys at millimeter to submilli… ▽ More The CCAT Collaboration's six-meter Fred Young Submillimeter Telescope is scheduled to begin observing in the Chilean Atacama in 2025, targeting a variety of science goals throughout cosmic history. Prime-Cam is a 1.8-meter diameter cryostat that will host up to seven independent instrument modules designed for simultaneous spectroscopic and broadband, polarimetric surveys at millimeter to submillimeter wavelengths. The first of these instrument modules, the 280 GHz module, will include ${\sim}$10,000 kinetic inductance detectors (KIDs) across three arrays. While the first array was fabricated out of tri-layer TiN/Ti/TiN, the other two arrays were fabricated out of a single layer of Al. This combination of materials within the same instrument provides a unique opportunity to directly compare the performance and noise properties of two different detector materials that are seeing increasing use within the field. We present preliminary comparisons here based on lab testing, along with a discussion of the potential impacts on operation when observing and translating raw data to science-grade maps. △ Less

Submitted 10 June, 2024; originally announced June 2024.

Comments: 6 pages, 3 figures, conference proceedings submitted to the Journal of Low Temperature Physics

CCAT: FYST Prime-Cam Readout Software: A framework for massively scalable KID arrays

Authors: James R. Burgoyne, Adrian K. Sinclair, Scott C. Chapman, Steve K. Choi, Cody J. Duell, Anthony I. Huber, Zachary B. Huber, Ben Keller, Lawrence Lin, Michael D. Niemack, Douglas Scott, Eve M. Vavagiakis, Samantha Walker, Matt Xie, the CCAT collaboration

Abstract: We outline the development of the readout software for the Prime-Cam and Mod-Cam instruments on the CCAT Fred Young Submillimeter Telescope (FYST), primecam_readout. The instruments feature lumped-element kinetic inductance detector (LEKID) arrays driven by Xilinx ZCU111 RFSoC boards. In the current configuration, each board can drive up to 4000 KIDs, and Prime-Cam is implementing approximately 25… ▽ More We outline the development of the readout software for the Prime-Cam and Mod-Cam instruments on the CCAT Fred Young Submillimeter Telescope (FYST), primecam_readout. The instruments feature lumped-element kinetic inductance detector (LEKID) arrays driven by Xilinx ZCU111 RFSoC boards. In the current configuration, each board can drive up to 4000 KIDs, and Prime-Cam is implementing approximately 25 boards. The software runs on a centralized control computer connected to the boards via dedicated ethernet, and facilitates such tasks as frequency-multiplexed tone comb driving, comb calibration and optimization, and detector timestream establishment. The control computer utilizes dynamically generated control channels for each board, allowing for simultaneous parallel control over all, while uniquely tracking diagnostics for each. This work demonstrates a scalable RFSoC readout architecture where computational demands increase linearly with the number of detectors, enabling control of tens-of-thousands of KIDs with modest hardware, and opening the door to the next generation of KID arrays housing millions of detectors. △ Less

Submitted 3 June, 2024; originally announced June 2024.

Comments: SPIE Astronomical Telescopes + Instrumentation conference proceedings

Breaking the 10 mW/pixel Limit for Kinetic Inductance Detector Readout Electronics

Authors: Adrian K. Sinclair, James R. Burgoyne, Yaqiong Li, Cody Duell, Scott C. Chapman, Anthony I. Huber, Ruixuan Xie

Abstract: We demonstrate a prototype kinetic inductance detector (KID) readout system that uses less than 10 mW per pixel. The CCAT-prime RFSoC based readout is capable of reading four independent detector networks of up to 1000 KIDs each. The power dissipation was measured to be less than 40 W while running multi-tone combs on all four channels simultaneously. The system was also used for the first time to… ▽ More We demonstrate a prototype kinetic inductance detector (KID) readout system that uses less than 10 mW per pixel. The CCAT-prime RFSoC based readout is capable of reading four independent detector networks of up to 1000 KIDs each. The power dissipation was measured to be less than 40 W while running multi-tone combs on all four channels simultaneously. The system was also used for the first time to perform sweeps and resonator identification on a prototype 280 GHz array. △ Less

Submitted 1 May, 2023; originally announced May 2023.

Comments: to appear in the ISSTT 2022 conference proceedings

CCAT-prime: The 850 GHz camera for Prime-Cam on FYST

Authors: Scott C. Chapman, Anthony I. Huber, Adrian K. Sinclair, Jordan D. Wheeler, Jason E. Austermann, James Beall, James Burgoyne, Steve K. Choi, Abigail Crites, Cody J. Duell, Jesslyn Devina, Jiansong Gao, Mike Fich, Doug Henke, Terry Herter, Doug Johnstone, Lewis B. G. Knee, Michael D. Niemack, Kayla M. Rossi, Gordon Stacey, Joel Tsuchitori, Joel Ullom, Jeff Van Lanen, Eve M. Vavagiakis, Michael Vissers , et al. (1 additional authors not shown)

Abstract: The Fred Young Submillimeter Telescope (FYST) at the Cerro-Chajnantor Atacama Telescope prime (CCAT- prime) Facility will host Prime-Cam as a powerful, first generation camera with imaging polarimeters working at several wavelengths and spectroscopic instruments aimed at intensity mapping during the Epoch of Reionization. Here we introduce the 850 GHz (350 micron) instrument module. This will be t… ▽ More The Fred Young Submillimeter Telescope (FYST) at the Cerro-Chajnantor Atacama Telescope prime (CCAT- prime) Facility will host Prime-Cam as a powerful, first generation camera with imaging polarimeters working at several wavelengths and spectroscopic instruments aimed at intensity mapping during the Epoch of Reionization. Here we introduce the 850 GHz (350 micron) instrument module. This will be the highest frequency module in Prime-Cam and the most novel for astronomical and cosmological surveys, taking full advantage of the atmospheric transparency at the high 5600 meter CCAT-prime siting on Cerro Chajnantor. With a 1.1 deg diameter field, the 850 GHz module will deploy ~40,000 Kinetic Inductance Detectors (KIDs) with Silicon platelet feedhorn coupling (both fabricated at NIST), and will provide unprecedented broadband intensity and polarization measurement capabilities. The 850 GHz module will be key to addressing pressing astrophysical questions regarding galaxy formation, Big Bang cosmology, and star formation within our own Galaxy. We present the motivation and overall design for the module, and initial laboratory characterization. △ Less

Submitted 22 August, 2022; originally announced August 2022.

Comments: 15 pages, accepted for publication in SPIE

CCAT-prime: Optical and cryogenic design of the 850 GHz module for Prime-Cam

Authors: Anthony I. Huber, Scott C. Chapman, Adrian K. Sinclair, Locke D. Spencer, Jason E. Austermann, Steve K. Choi, Jesslyn Devina, Patricio A. Gallardo, Doug Henke, Zachary B. Huber, Ben Keller, Yaqiong Li, Lawrence T. Lin, Mike Niemack, Kayla M. Rossi, Eve M. Vavagiakis, Jordan D. Wheeler

Abstract: Prime-Cam is a first-generation instrument for the Cerro Chajnantor Atacama Telescope-prime (CCAT-prime) Facility. The 850$~$GHz module for Prime-Cam will probe the highest frequency of all the instrument modules. We describe the parameter space of the 850$~$GHz optical system between the F$λ$ spacing, beam size, pixel sensitivity, and detector count. We present the optimization of an optical desi… ▽ More Prime-Cam is a first-generation instrument for the Cerro Chajnantor Atacama Telescope-prime (CCAT-prime) Facility. The 850$~$GHz module for Prime-Cam will probe the highest frequency of all the instrument modules. We describe the parameter space of the 850$~$GHz optical system between the F$λ$ spacing, beam size, pixel sensitivity, and detector count. We present the optimization of an optical design for the 850$~$GHz instrument module for CCAT-prime. We further describe the development of the cryogenic RF chain design to accommodate $>$30 readout lines to read 41,400 kinetic inductance detectors (KIDs) within the cryogenic testbed. △ Less

Submitted 19 August, 2022; originally announced August 2022.

Comments: 12 pages, 7 figures

CCAT-prime: RFSoC Based Readout for Frequency Multiplexed Kinetic Inductance Detectors

Authors: Adrian K. Sinclair, Ryan C. Stephenson, Cody A. Roberson, Eric L. Weeks, James Burgoyne, Anthony I. Huber, Philip M. Mauskopf, Scott C. Chapman, Jason E. Austermann, Steve K. Choi, Cody J. Duell, Michel Fich, Christopher E. Groppi, Zachary Huber, Michael D. Niemack, Thomas Nikola, Kayla M. Rossi, Adhitya Sriram, Gordon J. Stacey, Erik Szakiel, Joel Tsuchitori, Eve M. Vavagiakis, Jordan D. Wheeler, the CCAT-prime collaboration

Abstract: The Prime-Cam instrument on the Fred Young Submillimeter Telescope (FYST) is expected to be the largest deployment of millimeter and submillimeter sensitive kinetic inductance detectors to date. To read out these arrays efficiently, a microwave frequency multiplexed readout has been designed to run on the Xilinx Radio Frequency System on a Chip (RFSoC). The RFSoC has dramatically improved every ca… ▽ More The Prime-Cam instrument on the Fred Young Submillimeter Telescope (FYST) is expected to be the largest deployment of millimeter and submillimeter sensitive kinetic inductance detectors to date. To read out these arrays efficiently, a microwave frequency multiplexed readout has been designed to run on the Xilinx Radio Frequency System on a Chip (RFSoC). The RFSoC has dramatically improved every category of size, weight, power, cost, and bandwidth over the previous generation readout systems. We describe a baseline firmware design which can read out four independent RF networks each with 500 MHz of bandwidth and 1000 detectors for ~30 W. The overall readout architecture is a combination of hardware, gateware/firmware, software, and network design. The requirements of the readout are driven by the 850 GHz instrument module of the 7-module Prime-Cam instrument. These requirements along with other constraints which have led to critical design choices are highlighted. Preliminary measurements of the system phase noise and dynamic range are presented. △ Less

Submitted 15 August, 2022; originally announced August 2022.

Comments: Submitted to SPIE Astronomical Telescopes + Instrumentation 2022

Conceptual Design of the Modular Detector and Readout System for the CMB-S4 survey experiment

Authors: D. R. Barron, Z. Ahmed, J. Aguilar, A. J. Anderson, C. F. Baker, P. S. Barry, J. A. Beall, A. N. Bender, B. A. Benson, R. W. Besuner, T. W. Cecil, C. L. Chang, S. C. Chapman, G. E. Chesmore, G. Derylo, W. B. Doriese, S. M. Duff, T. Elleflot, J. P. Filippini, B. Flaugher, J. G. Gomez, P. K. Grimes, R. Gualtieri, I. Gullett, G. Haller , et al. (25 additional authors not shown)

Abstract: We present the conceptual design of the modular detector and readout system for the Cosmic Microwave Background Stage 4 (CMB-S4) ground-based survey experiment. CMB-S4 will map the cosmic microwave background (CMB) and the millimeter-wave sky to unprecedented sensitivity, using 500,000 superconducting detectors observing from Chile and Antarctica to map over 60 percent of the sky. The fundamental… ▽ More We present the conceptual design of the modular detector and readout system for the Cosmic Microwave Background Stage 4 (CMB-S4) ground-based survey experiment. CMB-S4 will map the cosmic microwave background (CMB) and the millimeter-wave sky to unprecedented sensitivity, using 500,000 superconducting detectors observing from Chile and Antarctica to map over 60 percent of the sky. The fundamental building block of the detector and readout system is a detector module package operated at 100 mK, which is connected to a readout and amplification chain that carries signals out to room temperature. It uses arrays of feedhorn-coupled orthomode transducers (OMT) that collect optical power from the sky onto dc-voltage-biased transition-edge sensor (TES) bolometers. The resulting current signal in the TESs is then amplified by a two-stage cryogenic Superconducting Quantum Interference Device (SQUID) system with a time-division multiplexer to reduce wire count, and matching room-temperature electronics to condition and transmit signals to the data acquisition system. Sensitivity and systematics requirements are being developed for the detector and readout system over a wide range of observing bands (20 to 300 GHz) and optical powers to accomplish CMB-S4's science goals. While the design incorporates the successes of previous generations of CMB instruments, CMB-S4 requires an order of magnitude more detectors than any prior experiment. This requires fabrication of complex superconducting circuits on over 10 square meters of silicon, as well as significant amounts of precision wiring, assembly and cryogenic testing. △ Less

Submitted 3 August, 2022; originally announced August 2022.

Comments: 25 pages, 15 figures, presented at and published in the proceedings of SPIE Astronomical Telescopes and Instrumentation 2022