Showing 1–22 of 22 results for author: Hinterreiter, J

Coupling between magnetic reconnection, energy release, and particle acceleration in the X17.2 2003 October 28 solar flare

Authors: Victoria G. Kurt, Astrid M. Veronig, Gregory D. Fleishman, Jürgen Hinterreiter, Johannes Tschernitz, Alexandra L. Lysenko

Abstract: The 2003 October 28 (X17.2) eruptive flare was a unique event. The coronal electric field and the π-decay γ-ray emission flux had the highest values ever inferred in solar flares. This study reveals physical links between the magnetic reconnection process, the energy release, and the acceleration of electrons and ions to high energies in the chain of the magnetic energy transformations in the impu… ▽ More The 2003 October 28 (X17.2) eruptive flare was a unique event. The coronal electric field and the π-decay γ-ray emission flux had the highest values ever inferred in solar flares. This study reveals physical links between the magnetic reconnection process, the energy release, and the acceleration of electrons and ions to high energies in the chain of the magnetic energy transformations in the impulsive phase of the solar flare. The global reconnection rate and the local reconnection rate are calculated from flare ribbon separation in Hα filtergrams and photospheric magnetic field maps. Available results of INTEGRAL and CORONAS-F/SONG observations are combined with Konus-Wind data to quantify time behavior of electron and proton acceleration. Prompt γ-ray lines and delayed 2.2 MeV line temporal profiles observed with Konus-Wind and INTEGRAL/SPI used to detect and quantify the nuclei with energies of 10-70 MeV. The global and local reconnection rates reach their peaks at the end of the main rise phase of the flare. The spectral analysis of the high-energy γ-ray emission revealed a close association between the acceleration process efficiency and the reconnection rates. High-energy bremsstrahlung continuum and narrow γ-ray lines were observed in the main rise phase. In the main energy release phase, the upper energy of the bremsstrahlung spectrum was significantly reduced and the pion-decay γ-ray emission appeared abruptly. We discuss the reasons why the change of the acceleration regime occurred along with the large-scale magnetic field restructuration of this flare. We argue that the main energy release and proton acceleration up to subrelativistic energies began just when the reconnection rate was going through the maximum, i.e., after a major change of the flare topology. △ Less

Submitted 12 March, 2024; originally announced March 2024.

Comments: 16 pages, 10 figures, AA accepted

Journal ref: A&A 686, A195 (2024)

Quantifying errors in 3D CME parameters derived from synthetic data using white-light reconstruction techniques

Authors: Christine Verbeke, M. Leila Mays, Christina Kay, Pete Riley, Erika Palmerio, Mateja Dumbović, Marilena Mierla, Camilla Scolini, Manuela Temmer, Evangelos Paouris, Laura A. Balmaceda, Hebe Cremades, Jürgen Hinterreiter

Abstract: (Shortened version) Current efforts in space weather forecasting of CMEs have been focused on predicting their arrival time and magnetic structure. To make predictions, methods have been developed to derive the true CME speed, size and position, among others. Difficulties in determining input parameters for CME forecasting arise from the lack of direct measurements of the coronal magnetic fields a… ▽ More (Shortened version) Current efforts in space weather forecasting of CMEs have been focused on predicting their arrival time and magnetic structure. To make predictions, methods have been developed to derive the true CME speed, size and position, among others. Difficulties in determining input parameters for CME forecasting arise from the lack of direct measurements of the coronal magnetic fields and uncertainties in estimating the CME 3D geometric and kinematic parameters. White-light coronagraph images are usually employed by a variety of CME reconstruction techniques. We explore how subjectivity affects the 3D CME parameters that are obtained from the GCS reconstruction technique. We have designed two different synthetic scenarios where the ``true'' geometric parameters are known in order to quantify such uncertainties for the first time. We explore this as follows: 1) Using the ray-tracing option from the GCS model software, and 2) Using 3D MHD simulation data from the MAS code. Our experiment includes different viewing configurations using single and multiple viewpoints. CME reconstructions using a single viewpoint had the largest errors and error ranges for both synthetic GCS and simulated MHD white-light data. Increasing the number of viewpoints to two, the errors decreased by about 4$^\circ$ in latitude, 22$^\circ$ in longitude, 14$^\circ$ in tilt, and 10$^\circ$ in half-angle, pointing towards a need for at least two viewpoints. We found the following CME parameter error bars as a starting point for quantifying the minimum error in CME parameters from white-light reconstructions: $Δθ$ (latitude)=${6^\circ}$, $Δφ$ (longitude)=${11^\circ}$, $Δγ$ (tilt)=${25^\circ}$, $Δα$ (half-angle)=${10^\circ}$, $Δh$ (height)=$0.6 R_{\odot}$, and $Δκ$ (ratio)=$0.1$. △ Less

Submitted 2 February, 2023; v1 submitted 1 February, 2023; originally announced February 2023.

Quantifying the uncertainty in CME kinematics derived from geometric modelling of Heliospheric Imager data

Authors: Luke Barnard, Mathew Owens, Christopher J. Scott, Mike Lockwood, Curt A. de Koning, Tanja Amerstorfer, Jürgen Hinterreiter, Christian Möstl, Jackie Davies, Pete Riley

Abstract: Geometric modelling of Coronal Mass Ejections (CMEs) is a widely used tool for assessing their kinematic evolution. Furthermore, techniques based on geometric modelling, such as ELEvoHI, are being developed into forecast tools for space weather prediction. These models assume that solar wind structure does not affect the evolution of the CME, which is an unquantified source of uncertainty. We use… ▽ More Geometric modelling of Coronal Mass Ejections (CMEs) is a widely used tool for assessing their kinematic evolution. Furthermore, techniques based on geometric modelling, such as ELEvoHI, are being developed into forecast tools for space weather prediction. These models assume that solar wind structure does not affect the evolution of the CME, which is an unquantified source of uncertainty. We use a large number of Cone CME simulations with the HUXt solar wind model to quantify the scale of uncertainty introduced into geometric modelling and the ELEvoHI CME arrival times by solar wind structure. We produce a database of simulations, representing an average, a fast, and an extreme CME scenario, each independently propagating through 100 different ambient solar wind environments. Synthetic heliospheric imager observations of these simulations are then used with a range of geometric models to estimate the CME kinematics. The errors of geometric modelling depend on the location of the observer, but do not seem to depend on the CME scenario. In general, geometric models are biased towards predicting CME apex distances that are larger than the true value. For these CME scenarios, geometric modelling errors are minimised for an observer in the L5 region. Furthermore, geometric modelling errors increase with the level of solar wind structure in the path of the CME. The ELEvoHI arrival time errors are minimised for an observer in the L5 region, with mean absolute arrival time errors of $8.2\pm1.2$~h, $8.3\pm1.0$~h, and $5.8\pm0.9$~h for the average, fast, and extreme CME scenarios. △ Less

Submitted 26 November, 2021; originally announced November 2021.

Comments: 37 pages, 12 figures. Accepted for publication in Space Weather

Multipoint interplanetary coronal mass ejections observed with Solar Orbiter, BepiColombo, Parker Solar Probe, Wind and STEREO-A

Authors: C. Möstl, A. J. Weiss, M. A. Reiss, T. Amerstorfer, R. L. Bailey, J. Hinterreiter, M. Bauer, D. Barnes, J. A. Davies, R. A. Harrison, J. L. Freiherr von Forstner, E. E. Davies, D. Heyner, T. Horbury, S. D. Bale

Abstract: We report the result of the first search for multipoint in situ and imaging observations of interplanetary coronal mass ejections (ICMEs) starting with the first Solar Orbiter (SolO) data in 2020 April - 2021 April. A data exploration analysis is performed including visualizations of the magnetic field and plasma observations made by the five spacecraft SolO, BepiColombo, Parker Solar Probe (PSP),… ▽ More We report the result of the first search for multipoint in situ and imaging observations of interplanetary coronal mass ejections (ICMEs) starting with the first Solar Orbiter (SolO) data in 2020 April - 2021 April. A data exploration analysis is performed including visualizations of the magnetic field and plasma observations made by the five spacecraft SolO, BepiColombo, Parker Solar Probe (PSP), Wind and STEREO-A, in connection with coronagraph and heliospheric imaging observations from STEREO-A/SECCHI and SOHO/LASCO. We identify ICME events that could be unambiguously followed with the STEREO-A heliospheric imagers during their interplanetary propagation to their impact at the aforementioned spacecraft, and look for events where the same ICME is seen in situ by widely separated spacecraft. We highlight two events: (1) a small streamer blowout CME on 2020 June 23 observed with a triple lineup by PSP, BepiColombo and Wind, guided by imaging with STEREO-A, and (2) the first fast CME of solar cycle 25 ($ \approx 1600$ km s$^{-1}$) on 2020 November 29 observed in situ by PSP and STEREO-A. These results are useful for modeling the magnetic structure of ICMEs and the interplanetary evolution and global shape of their flux ropes and shocks, and for studying the propagation of solar energetic particles. The combined data from these missions are already turning out to be a treasure trove for space weather research and are expected to become even more valuable with an increasing number of ICME events expected during the rise and maximum of solar cycle 25. △ Less

Submitted 4 January, 2022; v1 submitted 15 September, 2021; originally announced September 2021.

Comments: in press at ApJ Letters (submitted 2021 September 15, revised 2021 November 24, accepted 2021 December 9). 11 pages, 3 figures, 1 table

Drag-based CME modeling with heliospheric images incorporating frontal deformation: ELEvoHI 2.0

Authors: J. Hinterreiter, T. Amerstorfer, M. Temmer, M. A. Reiss, A. J. Weiss, C. Möstl, L. A. Barnard, J. Pomoell, M. Bauer, U. V. Amerstorfer

Abstract: The evolution and propagation of coronal mass ejections (CMEs) in interplanetary space is still not well understood. As a consequence, accurate arrival time and arrival speed forecasts are an unsolved problem in space weather research. In this study, we present the ELlipse Evolution model based on HI observations (ELEvoHI) and introduce a deformable front to this model. ELEvoHI relies on heliosphe… ▽ More The evolution and propagation of coronal mass ejections (CMEs) in interplanetary space is still not well understood. As a consequence, accurate arrival time and arrival speed forecasts are an unsolved problem in space weather research. In this study, we present the ELlipse Evolution model based on HI observations (ELEvoHI) and introduce a deformable front to this model. ELEvoHI relies on heliospheric imagers (HI) observations to obtain the kinematics of a CME. With the newly developed deformable front, the model is able to react to the ambient solar wind conditions during the entire propagation and along the whole front of the CME. To get an estimate of the ambient solar wind conditions, we make use of three different models: Heliospheric Upwind eXtrapolation model (HUX), Heliospheric Upwind eXtrapolation with time dependence model (HUXt), and EUropean Heliospheric FORecasting Information Asset (EUHFORIA). We test the deformable front on a CME first observed in STEREO-A/HI on February 3, 2010 14:49 UT. For this case study, the deformable front provides better estimates of the arrival time and arrival speed than the original version of ELEvoHI using an elliptical front. The new implementation enables us to study the parameters influencing the propagation of the CME not only for the apex, but for the entire front. The evolution of the CME front, especially at the flanks, is highly dependent on the ambient solar wind model used. An additional advantage of the new implementation is given by the possibility to provide estimates of the CME mass. △ Less

Submitted 18 August, 2021; originally announced August 2021.

Comments: 25 pages, 7 figures, 1 table, revised for Space Weather

Predicting CMEs using ELEvoHI with STEREO-HI beacon data

Authors: Maike Bauer, Tanja Amerstorfer, Jürgen Hinterreiter, Andreas J. Weiss, Jackie A. Davies, Christian Möstl, Ute V. Amerstorfer, Martin A. Reiss, Richard A. Harrison

Abstract: Being able to accurately predict the arrival of coronal mass ejections (CMEs) at Earth has been a long-standing problem in space weather research and operations. In this study, we use the ELlipse Evolution model based on Heliospheric Images (ELEvoHI) to predict the arrival time and speed of 10 CME events that were observed by HI on the STEREO-A spacecraft between 2010 and 2020. Additionally, we in… ▽ More Being able to accurately predict the arrival of coronal mass ejections (CMEs) at Earth has been a long-standing problem in space weather research and operations. In this study, we use the ELlipse Evolution model based on Heliospheric Images (ELEvoHI) to predict the arrival time and speed of 10 CME events that were observed by HI on the STEREO-A spacecraft between 2010 and 2020. Additionally, we introduce a Python tool for downloading and preparing STEREO-HI data, as well as tracking CMEs. In contrast to most previous studies, we use not only science data, which has a relatively high spatial and temporal resolution, but also low-quality beacon data, which is - in contrast to science data - provided in real-time by the STEREO-A spacecraft. We do not use data from the STEREO-B spacecraft. We get a mean absolute error of 8.81 $\pm$ 3.18 h / 59 $\pm$ 31 kms$^{-1}$ for arrival time/speed predictions using science data and 11.36 $\pm$ 8.69 h / 106 $\pm$ 61 kms$^{-1}$ for beacon data. We find that using science data generally leads to more accurate predictions, but using beacon data with the ELEvoHI model is certainly a viable choice in the absence of higher resolution real-time data. We propose that these differences could be minimized if not eliminated altogether if higher quality real-time data was available, either by enhancing the quality of the already available data or coming from a new mission carrying a HI instrument on-board. △ Less

Submitted 7 December, 2021; v1 submitted 18 August, 2021; originally announced August 2021.

Comments: 25 pages, 9 figures, submitted to AGU Space Weather 2021 August 9, published in Space Weather 2021 December 3

Journal ref: 2021, Space Weather, Volume 19, Issue 12

Solar origins of a strong stealth CME detected by Solar Orbiter

Authors: Jennifer O'Kane, Lucie M. Green, Emma E. Davies, Christian Möstl, Jürgen Hinterreiter, Johan L. Freiherr von Forstner, Andreas J. Weiss, David M. Long, Tanja Amerstorfer

Abstract: Aims.We aim to locate the origin of a stealth coronal mass ejection (CME) detected in situ by the MAG instrument on board Solar Orbiter, and make connections between the CME observed at the Sun, and the interplanetary CME (ICME) measured in situ. Methods. Remote sensing data are analysed using advanced image processing techniques to identify the source region of the stealth CME, and the global mag… ▽ More Aims.We aim to locate the origin of a stealth coronal mass ejection (CME) detected in situ by the MAG instrument on board Solar Orbiter, and make connections between the CME observed at the Sun, and the interplanetary CME (ICME) measured in situ. Methods. Remote sensing data are analysed using advanced image processing techniques to identify the source region of the stealth CME, and the global magnetic field at the time of the eruption is examined using Potential Field Source Surface (PFSS) models. The observations of the stealth CME at the Sun are compared with the magnetic field measured by the Solar Orbiter spacecraft, and plasma properties measured by the Wind spacecraft. Results. The source of the CME is found to be a quiet Sun cavity in the northern hemisphere. We find that the stealth CME has a strong magnetic field in situ, despite originating from a quiet Sun region with an extremely weak magnetic field. Conclusions. The interaction of the ICME with its surrounding environment is the likely cause of a higher magnetic field strength measured in situ. Stealth CMEs require multi-wavelength and multi-viewpoint observations in order to confidently locate the source region, however their elusive signatures still pose many problems for space weather forecasting. The findings have implications for Solar Orbiter observing sequences with instruments such as EUI that are designed to capture stealth CMEs △ Less

Submitted 31 March, 2021; originally announced March 2021.

Comments: 6 pages, 7 figures, accepted for publication in A&A

Multi point analysis of coronal mass ejection flux ropes using combined data from Solar Orbiter, BepiColombo and Wind

Authors: A. J. Weiss, C. Moestl, E. E. Davies, T. Amerstorfer, M. Bauer, J. Hinterreiter, M. Reiss, R. L. Bailey, T. S. Horbury, H. O'Brien, V. Evans, V. Angelini, D. Heiner, I. Richter, H-U. Auster, W. Magnes, D. Fischer, W. Baumjohann

Abstract: The recent launch of Solar Orbiter and BepiColombo opened a brief window in which these two spacecraft were positioned in a constellation that allows for the detailed sampling of any Earth-directed CMEs. Fortunately, two such events occurred with in situ detections of an ICME by Solar Orbiter on the 19th of April and the 28th of May 2020. These two events were subsequently also observed in situ by… ▽ More The recent launch of Solar Orbiter and BepiColombo opened a brief window in which these two spacecraft were positioned in a constellation that allows for the detailed sampling of any Earth-directed CMEs. Fortunately, two such events occurred with in situ detections of an ICME by Solar Orbiter on the 19th of April and the 28th of May 2020. These two events were subsequently also observed in situ by BepiColombo and Wind around a day later. We attempt to reconstruct the observed in situ magnetic field measurements for all three spacecraft simultaneously using an empirical magnetic flux rope model. This allows us to test the validity of our flux rope model on a larger and more global scale and allows for cross-validation of the analysis with different spacecraft combinations. Finally, we can also compare the results from the in situ modeling to remote observations obtained from the STEREO-A heliospheric imagers. We make use of the 3D coronal rope ejection model in order to simulate the ICME evolution. We adapt a previously developed ABC-SMC fitting algorithm for the application to multi point scenarios. We show that we are able to generally reconstruct the flux ropes signatures at three different spacecraft positions simultaneously using our model in combination with the flux rope fitting algorithm. For the well-behaved 19th of April ICME our approach works very well. The 28th of May ICME, on the other hand, shows the limitations of our approach. Unfortunately, the usage of multi-point observations for these events does not appear to solve inherent issues, such as the estimation of the magnetic field twist or flux rope aspect-ratios due to the specific constellation of the spacecraft positions. As our general approach can be used for any fast forward simulation-based model we give a blueprint for future studies using more advanced ICME models. △ Less

Submitted 17 May, 2021; v1 submitted 30 March, 2021; originally announced March 2021.

Comments: 11 pages, 7 figures

Journal ref: A&A 656, A13 (2021)

Radial Evolution of the April 2020 Stealth Coronal Mass Ejection between 0.8 and 1 AU -- A Comparison of Forbush Decreases at Solar Orbiter and Earth

Authors: Johan L. Freiherr von Forstner, Mateja Dumbović, Christian Möstl, Jingnan Guo, Athanasios Papaioannou, Robert Elftmann, Zigong Xu, Jan Christoph Terasa, Alexander Kollhoff, Robert F. Wimmer-Schweingruber, Javier Rodríguez-Pacheco, Andreas J. Weiss, Jürgen Hinterreiter, Tanja Amerstorfer, Maike Bauer, Anatoly V. Belov, Maria A. Abunina, Timothy Horbury, Emma E. Davies, Helen O'Brien, Robert C. Allen, G. Bruce Andrews, Lars Berger, Sebastian Boden, Ignacio Cernuda Cangas , et al. (18 additional authors not shown)

Abstract: Aims. We present observations of the first coronal mass ejection (CME) observed at the Solar Orbiter spacecraft on April 19, 2020, and the associated Forbush decrease (FD) measured by its High Energy Telescope (HET). This CME is a multispacecraft event also seen near Earth the next day. Methods. We highlight the capabilities of HET for observing small short-term variations of the galactic cosmic r… ▽ More Aims. We present observations of the first coronal mass ejection (CME) observed at the Solar Orbiter spacecraft on April 19, 2020, and the associated Forbush decrease (FD) measured by its High Energy Telescope (HET). This CME is a multispacecraft event also seen near Earth the next day. Methods. We highlight the capabilities of HET for observing small short-term variations of the galactic cosmic ray count rate using its single detector counters. The analytical ForbMod model is applied to the FD measurements to reproduce the Forbush decrease at both locations. Input parameters for the model are derived from both in situ and remote-sensing observations of the CME. Results. The very slow (~350 km/s) stealth CME caused a FD with an amplitude of 3 % in the low-energy cosmic ray measurements at HET and 2 % in a comparable channel of the Cosmic Ray Telescope for the Effects of Radiation (CRaTER) on the Lunar Reconnaissance Orbiter, as well as a 1 % decrease in neutron monitor measurements. Significant differences are observed in the expansion behavior of the CME at different locations, which may be related to influence of the following high speed solar wind stream. Under certain assumptions, ForbMod is able to reproduce the observed FDs in low-energy cosmic ray measurements from HET as well as CRaTER, but with the same input parameters, the results do not agree with the FD amplitudes at higher energies measured by neutron monitors on Earth. We study these discrepancies and provide possible explanations. Conclusions. This study highlights that the novel measurements of the Solar Orbiter can be coordinated with other spacecraft to improve our understanding of space weather in the inner heliosphere. Multi-spacecraft observations combined with data-based modeling are also essential to understand the propagation and evolution of CMEs as well as their space weather impacts. △ Less

Submitted 24 February, 2021; originally announced February 2021.

Comments: accepted for publication in Astronomy & Astrophysics

Journal ref: A&A 656, A1 (2021)

Why are ELEvoHI CME arrival predictions different if based on STEREO-A or STEREO-B heliospheric imager observations?

Authors: Jürgen Hinterreiter, Tanja Amerstorfer, Martin A. Reiss, Christian Möstl, Manuela Temmer, Maike Bauer, Ute V. Amerstorfer, Rachel L. Bailey, Andreas J. Weiss, Jackie A. Davies, Luke A. Barnard, Mathew J. Owens

Abstract: Accurate forecasting of the arrival time and arrival speed of coronal mass ejections (CMEs) is a unsolved problem in space weather research. In this study, a comparison of the predicted arrival times and speeds for each CME based, independently, on the inputs from the two STEREO vantage points is carried out. We perform hindcasts using ELlipse Evolution model based on Heliospheric Imager observati… ▽ More Accurate forecasting of the arrival time and arrival speed of coronal mass ejections (CMEs) is a unsolved problem in space weather research. In this study, a comparison of the predicted arrival times and speeds for each CME based, independently, on the inputs from the two STEREO vantage points is carried out. We perform hindcasts using ELlipse Evolution model based on Heliospheric Imager observations (ELEvoHI) ensemble modelling. An estimate of the ambient solar wind conditions is obtained by the Wang-Sheeley-Arge/Heliospheric Upwind eXtrapolation (WSA/HUX) model combination that serves as input to ELEvoHI. We carefully select 12 CMEs between February 2010 and July 2012 that show clear signatures in both STEREO-A and STEREO-B HI time-elongation maps, that propagate close to the ecliptic plane, and that have corresponding in situ signatures at Earth. We find a mean arrival time difference of 6.5 hrs between predictions from the two different viewpoints, which can reach up to 9.5 hrs for individual CMEs, while the mean arrival speed difference is 63 km s$^{-1}$. An ambient solar wind with a large speed variance leads to larger differences in the STEREO-A and STEREO-B CME arrival time predictions ($cc~=~0.92$). Additionally, we compare the predicted arrivals, from both spacecraft, to the actual in situ arrivals at Earth and find a mean absolute error of 7.5 $\pm$ 9.5 hrs for the arrival time and 87 $\pm$ 111 km s$^{-1}$ for the arrival speed. There is no tendency for one spacecraft to provide more accurate arrival predictions than the other. △ Less

Submitted 15 February, 2021; originally announced February 2021.

In situ multi-spacecraft and remote imaging observations of the first CME detected by Solar Orbiter and BepiColombo

Authors: E. E. Davies, C. Möstl, M. J. Owens, A. J. Weiss, T. Amerstorfer, J. Hinterreiter, M. Bauer, R. L. Bailey, M. A. Reiss, R. J. Forsyth, T. S. Horbury, H. O'Brien, V. Evans, V. Angelini, D. Heyner, I. Richter, H-U. Auster, W. Magnes, W. Baumjohann, D. Fischer, D. Barnes, J. A. Davies, R. A. Harrison

Abstract: On 2020 April 19 a coronal mass ejection (CME) was detected in situ by Solar Orbiter at a heliocentric distance of about 0.8 AU. The CME was later observed in situ on April 20th by the Wind and BepiColombo spacecraft whilst BepiColombo was located very close to Earth. This CME presents a good opportunity for a triple radial alignment study, as the spacecraft were separated by less than 5$^\circ$ i… ▽ More On 2020 April 19 a coronal mass ejection (CME) was detected in situ by Solar Orbiter at a heliocentric distance of about 0.8 AU. The CME was later observed in situ on April 20th by the Wind and BepiColombo spacecraft whilst BepiColombo was located very close to Earth. This CME presents a good opportunity for a triple radial alignment study, as the spacecraft were separated by less than 5$^\circ$ in longitude. The source of the CME, which was launched on April 15th, was an almost entirely isolated streamer blowout. STEREO-A observed the event remotely from -75.1$^\circ$ longitude, which is an exceptionally well suited viewpoint for heliospheric imaging of an Earth directed CME. The configuration of the four spacecraft has provided an exceptionally clean link between remote imaging and in situ observations of the CME. We have used the in situ observations of the CME at Solar Orbiter, Wind, and BepiColombo, and the remote observations of the CME at STEREO-A in combination with flux rope models to determine the global shape of the CME and its evolution as it propagated through the inner heliosphere. A clear flattening of the CME cross-section has been observed by STEREO-A, and further confirmed by comparing profiles of the flux rope models to the in situ data, where the distorted flux rope cross-section qualitatively agrees most with in situ observations of the magnetic field at Solar Orbiter. Comparing in situ observations of the magnetic field between spacecraft, we find that the dependence of the maximum (mean) magnetic field strength decreases with heliocentric distance as $r^{-1.24 \pm 0.50}$ ($r^{-1.12 \pm 0.14}$), in disagreement with previous studies. Further assessment of the axial and poloidal magnetic field strength dependencies suggests that the expansion of the CME is likely neither self-similar nor cylindrically symmetric. △ Less

Submitted 23 February, 2021; v1 submitted 14 December, 2020; originally announced December 2020.

Journal ref: A&A 656, A2 (2021)

Analysis of coronal mass ejection flux rope signatures using 3DCORE and approximate Bayesian Computation

Authors: Andreas J. Weiss, Christian Möstl, Tanja Amerstorfer, Rachel L. Bailey, Martin A. Reiss, Jürgen Hinterreiter, Ute A. Amerstorfer, Maike Bauer

Abstract: We present a major update to the 3D coronal rope ejection (3DCORE) technique for modeling coronal mass ejection flux ropes in conjunction with an Approximate Bayesian Computation (ABC) algorithm that is used for fitting the model to in situ magnetic field measurements. The model assumes an empirically motivated torus-like flux rope structure that expands self-similarly within the heliosphere, is i… ▽ More We present a major update to the 3D coronal rope ejection (3DCORE) technique for modeling coronal mass ejection flux ropes in conjunction with an Approximate Bayesian Computation (ABC) algorithm that is used for fitting the model to in situ magnetic field measurements. The model assumes an empirically motivated torus-like flux rope structure that expands self-similarly within the heliosphere, is influenced by a simplified interaction with the solar wind environment, and carries along an embedded analytical magnetic field. The improved 3DCORE implementation allows us to generate extremely large ensemble simulations which we then use to find global best-fit model parameters using an ABC sequential Monte Carlo (SMC) algorithm. The usage of this algorithm, under some basic assumptions on the uncertainty of the magnetic field measurements, allows us to furthermore generate estimates on the uncertainty of model parameters using only a single in situ observation. We apply our model to synthetically generated measurements to prove the validity of our implementation for the fitting procedure. We also present a brief analysis, within the scope of our model, of an event captured by Parker Solar Probe (PSP) shortly after its first fly-by of the Sun on 2018 November 12 at 0.25 AU. The presented toolset is also easily extendable to the analysis of events captured by multiple spacecraft and will therefore facilitate future multi-point studies. △ Less

Submitted 17 November, 2020; v1 submitted 1 September, 2020; originally announced September 2020.

Comments: 18 pages, 11 figures, in press at ApJS, accepted 10 November 2020

Evaluation of CME Arrival Prediction Using Ensemble Modeling Based on Heliospheric Imaging Observations

Authors: Tanja Amerstorfer, Jürgen Hinterreiter, Martin A. Reiss, Christian Möstl, Jackie A. Davies, Rachel L. Bailey, Andreas J. Weiss, Mateja Dumbović, Maike Bauer, Ute V. Amerstorfer, Richard A. Harrison

Abstract: In this study, we evaluate a coronal mass ejection (CME) arrival prediction tool that utilizes the wide-angle observations made by STEREO's heliospheric imagers (HI). The unsurpassable advantage of these imagers is the possibility to observe the evolution and propagation of a CME from close to the Sun out to 1 AU and beyond. We believe that by exploiting this capability, instead of relying on coro… ▽ More In this study, we evaluate a coronal mass ejection (CME) arrival prediction tool that utilizes the wide-angle observations made by STEREO's heliospheric imagers (HI). The unsurpassable advantage of these imagers is the possibility to observe the evolution and propagation of a CME from close to the Sun out to 1 AU and beyond. We believe that by exploiting this capability, instead of relying on coronagraph observations only, it is possible to improve today's CME arrival time predictions. The ELlipse Evolution model based on HI observations (ELEvoHI) assumes that the CME frontal shape within the ecliptic plane is an ellipse, and allows the CME to adjust to the ambient solar wind speed, i.e. it is drag-based. ELEvoHI is used to perform ensemble simulations by varying the CME frontal shape within given boundary conditions that are consistent with the observations made by HI. In this work, we evaluate different set-ups of the model by performing hindcasts for 15 well-defined isolated CMEs that occurred when STEREO was near L4/5, between the end of 2008 and the beginning of 2011. In this way, we find a mean absolute error of between $6.2\pm7.9$ h and $9.9\pm13$ h depending on the model set-up used. ELEvoHI is specified for using data from future space weather missions carrying HIs located at L5 or L1. It can also be used with near real-time STEREO-A HI beacon data to provide CME arrival predictions during the next $\sim7$ years when STEREO-A is observing the Sun-Earth space. △ Less

Submitted 16 February, 2021; v1 submitted 6 August, 2020; originally announced August 2020.

Comments: 25 pages, 9 figures, 2 tables; This article also appears in: Heliophysics and Space Weather Studies from the Sun-Earth Lagrange Points

Journal ref: AGU Space Weather, 2021, Volume19, Issue 1

Prediction of the in situ coronal mass ejection rate for solar cycle 25: Implications for Parker Solar Probe in situ observations

Authors: Christian Möstl, Andreas J. Weiss, Rachel L. Bailey, Martin A. Reiss, Tanja Amerstorfer, Jürgen Hinterreiter, Maike Bauer, Scott W. McIntosh, Noé Lugaz, David Stansby

Abstract: The Parker Solar Probe (PSP) and Solar Orbiter missions are designed to make groundbreaking observations of the Sun and interplanetary space within this decade. We show that a particularly interesting in situ observation of an interplanetary coronal mass ejection (ICME) by PSP may arise during close solar flybys ($< 0.1$~AU). During these times, the same magnetic flux rope inside an ICME could be… ▽ More The Parker Solar Probe (PSP) and Solar Orbiter missions are designed to make groundbreaking observations of the Sun and interplanetary space within this decade. We show that a particularly interesting in situ observation of an interplanetary coronal mass ejection (ICME) by PSP may arise during close solar flybys ($< 0.1$~AU). During these times, the same magnetic flux rope inside an ICME could be observed in situ by PSP twice, by impacting its frontal part as well as its leg. Investigating the odds of this situation, we forecast the ICME rate in solar cycle 25 based on 2 models for the sunspot number (SSN): (1) the forecast of an expert panel in 2019 (maximum SSN = 115), and (2) a prediction by McIntosh et al. (2020, maximum SSN = 232). We link the SSN to the observed ICME rates in solar cycles 23 and 24 with the Richardson and Cane list and our own ICME catalog, and calculate that between 1 and 7 ICMEs will be observed by PSP at heliocentric distances $< 0.1$ AU until 2025, including 1$σ$ uncertainties. We then model the potential flux rope signatures of such a double-crossing event with the semi-empirical 3DCORE flux rope model, showing a telltale elevation of the radial magnetic field component $B_R$, and a sign reversal in the component $B_N$ normal to the solar equator compared to field rotation in the first encounter. This holds considerable promise to determine the structure of CMEs close to their origin in the solar corona. △ Less

Submitted 17 September, 2020; v1 submitted 29 July, 2020; originally announced July 2020.

Comments: 11 pages, 6 figures, accepted for publication in the Astrophysical Journal on 2020 September 17

Journal ref: ApJ, 903, 92 (2020)

Using gradient boosting regression to improve ambient solar wind model predictions

Authors: R. L. Bailey, M. A. Reiss, C. N. Arge, C. Möstl, M. J. Owens, U. V. Amerstorfer, C. J. Henney, T. Amerstorfer, A. J. Weiss, J. Hinterreiter

Abstract: Studying the ambient solar wind, a continuous pressure-driven plasma flow emanating from our Sun, is an important component of space weather research. The ambient solar wind flows in interplanetary space determine how solar storms evolve through the heliosphere before reaching Earth, and especially during solar minimum are themselves a driver of activity in the Earth's magnetic field. Accurately f… ▽ More Studying the ambient solar wind, a continuous pressure-driven plasma flow emanating from our Sun, is an important component of space weather research. The ambient solar wind flows in interplanetary space determine how solar storms evolve through the heliosphere before reaching Earth, and especially during solar minimum are themselves a driver of activity in the Earth's magnetic field. Accurately forecasting the ambient solar wind flow is therefore imperative to space weather awareness. Here we present a machine learning approach in which solutions from magnetic models of the solar corona are used to output the solar wind conditions near the Earth. The results are compared to observations and existing models in a comprehensive validation analysis, and the new model outperforms existing models in almost all measures. In addition, this approach offers a new perspective to discuss the role of different input data to ambient solar wind modeling, and what this tells us about the underlying physical processes. The final model discussed here represents an extremely fast, well-validated and open-source approach to the forecasting of ambient solar wind at Earth. △ Less

Submitted 23 March, 2021; v1 submitted 23 June, 2020; originally announced June 2020.

Comments: 15 pages, 6 figures, 3 tables

Prediction of Dst during solar minimum using in situ measurements at L5

Authors: R. L. Bailey, C. Möstl, M. A. Reiss, A. J. Weiss, U. V. Amerstorfer, T. Amerstorfer, J. Hinterreiter, W. Magnes, R. Leonhardt

Abstract: Geomagnetic storms resulting from high-speed streams can have significant negative impacts on modern infrastructure due to complex interactions between the solar wind and geomagnetic field. One measure of the extent of this effect is the Kyoto $Dst$ index. We present a method to predict $Dst$ from data measured at the Lagrange 5 (L5) point, which allows for forecasts of solar wind development 4.5… ▽ More Geomagnetic storms resulting from high-speed streams can have significant negative impacts on modern infrastructure due to complex interactions between the solar wind and geomagnetic field. One measure of the extent of this effect is the Kyoto $Dst$ index. We present a method to predict $Dst$ from data measured at the Lagrange 5 (L5) point, which allows for forecasts of solar wind development 4.5 days in advance of the stream reaching the Earth. Using the STEREO-B satellite as a proxy, we map data measured near L5 to the near-Earth environment and make a prediction of the $Dst$ from this point using the Temerin-Li $Dst$ model enhanced from the original using a machine learning approach. We evaluate the method accuracy with both traditional point-to-point error measures and an event-based validation approach. The results show that predictions using L5 data outperform a 27-day solar wind persistence model in all validation measures but do not achieve a level similar to an L1 monitor. Offsets in timing and the rapidly-changing development of $B_z$ in comparison to $B_x$ and $B_y$ reduce the accuracy. Predictions of $Dst$ from L5 have an RMSE of $9$ nT, which is double the error of $4$ nT using measurements conducted near the Earth. The most useful application of L5 measurements is shown to be in predicting the minimum $Dst$ for the next four days. This method is being implemented in a real-time forecast setting using STEREO-A as an L5 proxy, and has implications for the usefulness of future L5 missions. △ Less

Submitted 1 May, 2020; originally announced May 2020.

Comments: 20 pages, 6 figures, in press at AGU Space Weather

Testing the background solar wind modelled by EUHFORIA

Authors: J. Hinterreiter, J. Magdalenic, M. Temmer, C. Verbeke, I. C. Jeberaj, E. Samara, E. Asvestari, S. Poedts, J. Pomoell, E. Kilpua, L. Rodriguez, C. Scolini, A. Isavnin

Abstract: In order to address the growing need for more accurate space weather predictions, a new model named EUHFORIA (EUropean Heliospheric FORecasting Information Asset) was recently developed (Pomoell and Poedts, 2018). We present first results of the performance assessment for the solar wind modeling with EUHFORIA and identify possible limitations of its present setup. Using the basic EUHFORIA 1.0.4. m… ▽ More In order to address the growing need for more accurate space weather predictions, a new model named EUHFORIA (EUropean Heliospheric FORecasting Information Asset) was recently developed (Pomoell and Poedts, 2018). We present first results of the performance assessment for the solar wind modeling with EUHFORIA and identify possible limitations of its present setup. Using the basic EUHFORIA 1.0.4. model setup with the default input parameters, we modeled background solar wind (no coronal mass ejections) and compared the obtained results with ACE, in situ measurements. For the need of statistical study we developed a technique of combining daily EUHFORIA runs into continuous time series. The combined time series were derived for the years 2008 (low solar activity) and 2012 (high solar activity) from which in situ speed and density profiles were extracted. We find for the low activity phase a better match between model results and observations compared to the considered high activity time interval. The quality of the modeled solar wind parameters is found to be rather variable. Therefore, to better understand the obtained results we also qualitatively inspected characteristics of coronal holes, sources of the studied fast streams. We discuss how different characteristics of the coronal holes and input parameters to EUHFORIA influence the modeled fast solar wind, and suggest possibilities for the improvements of the model. △ Less

Submitted 16 August, 2019; v1 submitted 17 July, 2019; originally announced July 2019.

Comments: submitted to Solar Physics

Unusual plasma and particle signatures at Mars and STEREO-A related to CME-CME interaction

Authors: Mateja Dumbovic, Jingnan Guo, Manuela Temmer, M. Leila Mays, Astrid Veronig, Stephan Heinemann, Karin Dissauer, Stefan Hofmeister, Jasper Halekas, Christian Möstl, Tanja Amerstorfer, Jürgen Hinterreiter, Sasa Banjac, Konstantin Herbst, Yuming Wang, Lukas Holzknecht, Martin Leitner, Robert F. Wimmer-Schweingruber

Abstract: On July 25 2017 a multi-step Forbush decrease (FD) with the remarkable total amplitude of more than 15\% was observed by MSL/RAD at Mars. We find that these particle signatures are related to very pronounced plasma and magnetic field signatures detected in situ by STEREO-A on July 24 2017, with a higher than average total magnetic field strength reaching more than 60 nT. In the observed time perio… ▽ More On July 25 2017 a multi-step Forbush decrease (FD) with the remarkable total amplitude of more than 15\% was observed by MSL/RAD at Mars. We find that these particle signatures are related to very pronounced plasma and magnetic field signatures detected in situ by STEREO-A on July 24 2017, with a higher than average total magnetic field strength reaching more than 60 nT. In the observed time period STEREO-A was at a relatively small longitudinal separation (46 degrees) to Mars and both were located at the back side of the Sun as viewed from Earth. We analyse a number of multi-spacecraft and multi-instrument (both in situ and remote-sensing) observations, and employ modelling to understand these signatures. We find that the solar sources are two CMEs which erupted on July 23 2017 from the same source region on the back side of the Sun as viewed from Earth. Moreover, we find that the two CMEs interact non-uniformly, inhibiting the expansion of one of the CMEs in STEREO-A direction, whereas allowing it to expand more freely in the Mars direction. The interaction of the two CMEs with the ambient solar wind adds up to the complexity of the event, resulting in a long, sub-structured interplanetary disturbance at Mars, where different sub-structures correspond to different steps of the FD, adding-up to a globally large-amplitude FD. △ Less

Submitted 6 June, 2019; originally announced June 2019.

Comments: 25 pages, 9 figures

Coronal hole evolution from multi-viewpoint data as input for a STEREO solar wind speed persistence model

Authors: M. Temmer, J. Hinterreiter, M. A. Reiss

Abstract: We present a concept study of a solar wind forecasting method for Earth, based on persistence modeling from STEREO in-situ measurements combined with multi-viewpoint EUV observational data. By comparing the fractional areas of coronal holes (CHs) extracted from EUV data of STEREO and SoHO/SDO, we perform an uncertainty assessment derived from changes in the CHs and apply those changes to the predi… ▽ More We present a concept study of a solar wind forecasting method for Earth, based on persistence modeling from STEREO in-situ measurements combined with multi-viewpoint EUV observational data. By comparing the fractional areas of coronal holes (CHs) extracted from EUV data of STEREO and SoHO/SDO, we perform an uncertainty assessment derived from changes in the CHs and apply those changes to the predicted solar wind speed profile at 1AU. We evaluate the method for the time period 2008-2012, and compare the results to a persistence model based on ACE in-situ measurements and to the STEREO persistence model without implementing the information on CH evolution. Compared to an ACE based persistence model, the performance of the STEREO persistence model which takes into account the evolution of CHs, is able to increase the number of correctly predicted high-speed streams by about 12%, and to decrease the number of missed streams by about 23%, and the number of false alarms by about 19%. However, the added information on CH evolution is not able to deliver more accurate speed values for the forecast than using the STEREO persistence model without CH information which performs better than an ACE based persistence model. Investigating the CH evolution between STEREO and Earth view for varying separation angles over ~25-140° East of Earth, we derive some relation between expanding CHs and increasing solar wind speed, but a less clear relation for decaying CHs and decreasing solar wind speed. This fact most likely prevents the method from making more precise forecasts. The obtained results support a future L5 mission and show the importance and valuable contribution using multi-viewpoint data. △ Less

Submitted 30 January, 2018; originally announced January 2018.

Comments: The manuscript has been accepted for publication in the Journal of Space Weather and Space Climate (SWSC)

Statistical Properties of Ribbon Evolution and Reconnection Electric Fields in Eruptive and Confined Flares

Authors: Jürgen Hinterreiter, Astrid M. Veronig, Julia K. Thalmann, Johannes Tschernitz, Werner Pötzi

Abstract: A statistical study of the chromospheric ribbon evolution in H$α$ two-ribbon flares is performed. The data set consists of 50 confined ($62\,\%$) and eruptive ($38\,\%$) flares that occurred from June 2000 to June 2015. The flares are selected homogeneously over the H$α$ and $\textit{GOES}$ (Geostationary Operational Environmental Satellite) classes, with an emphasis on including powerful confined… ▽ More A statistical study of the chromospheric ribbon evolution in H$α$ two-ribbon flares is performed. The data set consists of 50 confined ($62\,\%$) and eruptive ($38\,\%$) flares that occurred from June 2000 to June 2015. The flares are selected homogeneously over the H$α$ and $\textit{GOES}$ (Geostationary Operational Environmental Satellite) classes, with an emphasis on including powerful confined flares and weak eruptive flares. H$α$ filtergrams from Kanzelhöhe Observatory in combination with $\textit{MDI}$ (Michelson Doppler Imager) and $\textit{HMI}$ (Helioseismic and Magnetic Imager) magnetograms are used to derive the ribbon separation, the ribbon-separation velocity, the magnetic-field strength, and the reconnection electric field. We find that eruptive flares reveal statistically larger ribbon separation and higher ribbon-separation velocities than confined flares. In addition, the ribbon separation of eruptive flares correlates with the GOES SXR flux, whereas no clear dependence was found for confined flares. The maximum ribbon-separation velocity is not correlated with the GOES flux, but eruptive flares reveal on average a higher ribbon-separation velocity (by $\approx 10~$km$~$s$^{-1}$). The local reconnection electric field of confined ($cc=0.50~\pm~0.02$) and eruptive ($cc=0.77~\pm~0.03$) flares correlates with the GOES flux, indicating that more powerful flares involve stronger reconnection electric fields. In addition, eruptive flares with higher electric-field strengths tend to be accompanied by faster coronal mass ejections. △ Less

Submitted 10 January, 2018; originally announced January 2018.

Comments: 26 pages, 14 figures, 2 tables, accepted for publication in Solar Physics

Reconnection fluxes in eruptive and confined flares and implications for superflares on the Sun

Authors: Johannes Tschernitz, Astrid M. Veronig, Julia K. Thalmann, Jürgen Hinterreiter, Werner Pötzi

Abstract: We study the energy release process of a set of 51 flares (32 confined, 19 eruptive) ranging from GOES class B3 to X17. We use H$α$ filtergrams from Kanzelhöhe Observatory together with SDO HMI and SOHO MDI magnetograms to derive magnetic reconnection fluxes and rates. The flare reconnection flux is strongly correlated with the peak of the GOES 1-8 Å soft X-ray flux (c=0.92, in log-log space), bot… ▽ More We study the energy release process of a set of 51 flares (32 confined, 19 eruptive) ranging from GOES class B3 to X17. We use H$α$ filtergrams from Kanzelhöhe Observatory together with SDO HMI and SOHO MDI magnetograms to derive magnetic reconnection fluxes and rates. The flare reconnection flux is strongly correlated with the peak of the GOES 1-8 Å soft X-ray flux (c=0.92, in log-log space), both for confined and eruptive flares. Confined flares of a certain GOES class exhibit smaller ribbon areas but larger magnetic flux densities in the flare ribbons (by a factor of 2). In the largest events, up to $\approx$50\%\ of the magnetic flux of the active region (AR) causing the flare is involved in the flare magnetic reconnection. These findings allow us to extrapolate toward the largest solar flares possible. A complex solar AR hosting a magnetic flux of $2\cdot 10^{23}\, \mathrm{Mx}$, which is in line with the largest AR fluxes directly measured, is capable of producing an X80 flare, which corresponds to a bolometric energy of about $7 \cdot 10^{32}$ ergs. Using a magnetic flux estimate of $6\cdot 10^{23}\, \mathrm{Mx}$ for the largest solar AR observed, we find that flares of GOES class $\approx$X500 could be produced ($E_{\rm bol} \approx 3 \cdot 10^{33}$ ergs). These estimates suggest that the present day's Sun is capable of producing flares and related space weather events that may be more than an order of magnitude stronger than have been observed to date. △ Less

Submitted 13 December, 2017; originally announced December 2017.

Comments: 27 pages, 13 figures, 4 tables, accepted for publication in ApJ

On flare-CME characteristics from Sun to Earth combining remote-sensing image data with in-situ measurements supported by modeling

Authors: M. Temmer, J. K. Thalmann, K. Dissauer, A. M. Veronig, J. Tschernitz, J. Hinterreiter, L. Rodriguez

Abstract: We analyze the well observed flare-CME event from October 1, 2011 (SOL2011-10-01T09:18) covering the complete chain of action - from Sun to Earth - for a better understanding of the dynamic evolution of the CME and its embedded magnetic field. We study the solar surface and atmosphere associated with the flare-CME from SDO and ground-based instruments, and also track the CME signature off-limb fro… ▽ More We analyze the well observed flare-CME event from October 1, 2011 (SOL2011-10-01T09:18) covering the complete chain of action - from Sun to Earth - for a better understanding of the dynamic evolution of the CME and its embedded magnetic field. We study the solar surface and atmosphere associated with the flare-CME from SDO and ground-based instruments, and also track the CME signature off-limb from combined EUV and white-light data with STEREO. By applying 3D reconstruction techniques (GCS, total mass) to stereoscopic STEREO-SoHO coronagraph data, we track the temporal and spatial evolution of the CME in interplanetary space and derive its geometry and 3D-mass. We combine the GCS and Lundquist model results to derive the axial flux and helicity of the MC from in-situ measurements (Wind). This is compared to nonlinear force-free (NLFF) model results as well as to the reconnected magnetic flux derived from the flare ribbons (flare reconnection flux) and the magnetic flux encompassed by the associated dimming (dimming flux). We find that magnetic reconnection processes were already ongoing before the start of the impulsive flare phase, adding magnetic flux to the flux rope before its final eruption. The dimming flux increases by more than 25% after the end of the flare, indicating that magnetic flux is still added to the flux rope after eruption. Hence, the derived flare reconnection flux is most probably a lower limit for estimating the magnetic flux within the flux rope. We find that the magnetic helicity and axial magnetic flux are reduced in interplanetary space by ~50% and 75%, respectively, possibly indicating to an erosion process. A mass increase of 10% for the CME is observed over the distance range from ~4-20 Rs. The temporal evolution of the CME associated core dimming regions supports the scenario that fast outflows might supply additional mass to the rear part of the CME. △ Less

Submitted 2 March, 2017; originally announced March 2017.

Comments: accepted for publication in Solar Physics