-
An Automatic Approach for Grouping Sunspots and Calculating Relative Sunspot Number on SDO/HMI Continuum Images
Authors:
Cui Zhao,
Shangbin Yang,
Tingmei Wang,
Haiyan Zhao,
Shiyuan Liu,
Fangyuan He,
Zhengkun Hu
Abstract:
Relative Sunspot Number is one of the major parameters for the study of long-term solar activity. The automatic calculation of the Relative Sunspot Number is more stable and accurate as compared to manual methods. In this paper, we propose an algorithm that can detect sunspots and divide them into groups, to automatically calculate the Relative Sunspot Number. Mathematical Morphology was adopted t…
▽ More
Relative Sunspot Number is one of the major parameters for the study of long-term solar activity. The automatic calculation of the Relative Sunspot Number is more stable and accurate as compared to manual methods. In this paper, we propose an algorithm that can detect sunspots and divide them into groups, to automatically calculate the Relative Sunspot Number. Mathematical Morphology was adopted to detect sunspots then group them. The dataset used were the continuum images from SDO/HMI. The process was carried out on the overall HMI data available on the timespan from January 2022 to May 2023 with a time cadence of one day. The experimental results indicated that the method achieved high accuracy of 85.3\%. It was well fitted with the international Relative Sunspot Number provided by Solar Influences Data Analysis Center (SIDC) (CC=0.91). We calculated the conversion factor K value of SDO/HMI for calculating the Relative Sunspots Number(K=1.03).
△ Less
Submitted 16 January, 2024;
originally announced January 2024.
-
Extending the unified subhalo model to warm dark matter
Authors:
Feihong He,
Jiaxin Han,
Hongyu Gao,
Jiajun Zhang
Abstract:
Using a set of high-resolution N-body simulations, we extend the unified distribution model of cold dark matter (CDM) subhaloes to the warm dark matter(WDM) case. The same model framework combining the unevolved mass function, unevolved radial distribution, and tidal stripping can predict the mass function and spatial distribution of subhaloes in both CDM and WDM simulations. The dependence of the…
▽ More
Using a set of high-resolution N-body simulations, we extend the unified distribution model of cold dark matter (CDM) subhaloes to the warm dark matter(WDM) case. The same model framework combining the unevolved mass function, unevolved radial distribution, and tidal stripping can predict the mass function and spatial distribution of subhaloes in both CDM and WDM simulations. The dependence of the model on the DM particle property is universally parameterized through the half-mode mass of the initial power spectrum. Compared with the CDM model, the WDM model differs most notably in two aspects. 1) In contrast to the power-law form in CDM, the unevolved subhalo mass function for WDM is scale-dependent at the low mass end due to the cut-off in the initial power spectrum. 2) WDM subhaloes are more vulnerable to tidal stripping and disruption due to their lower concentrations at accretion time. Their survival rate is also found to depend on the infall mass. Accounting for these differences, the model predicts a final WDM subhalo mass function that is also proportional to the unevolved subhalo mass function. The radial distribution of WDM subhaloes is predicted to be mass-dependent. For low mass subhaloes, the radial distribution is flatter in the inner halo and steeper in the outer halo compared to the CDM counterpart, due to the scale-dependent unevolved mass function and the enhanced tidal stripping. The code for sampling subhaloes according to our generalized model is available at https://github.com/fhtouma/subgen2 .
△ Less
Submitted 3 September, 2023;
originally announced September 2023.
-
Cosmological constraints from Type I radio-loud quasars
Authors:
L. Huang,
Z. Y. Tu,
N. Chang,
F. F. Song,
F. He,
X. Y. Fu
Abstract:
We obtain a new sample of 1192 Type I quasars with the UV-optical, radio and X-ray wavebands coverage by combining \citet{Huang2022} and other matching data of SDSS-DR16 with FIRST, XMM-Newton, and Chandra Source Catalog, and a sample of 407 flat-spectrum radio-loud quasars (FSRLQs) of blazars from the Roma-BZCAT, which can be used to investigate their multi-band luminosity correlations and measur…
▽ More
We obtain a new sample of 1192 Type I quasars with the UV-optical, radio and X-ray wavebands coverage by combining \citet{Huang2022} and other matching data of SDSS-DR16 with FIRST, XMM-Newton, and Chandra Source Catalog, and a sample of 407 flat-spectrum radio-loud quasars (FSRLQs) of blazars from the Roma-BZCAT, which can be used to investigate their multi-band luminosity correlations and measure the luminosity distances of these Type I radio-loud quasars (RLQs) samples. We check the correlation between X-ray, UV-optical, and radio luminosity for various groupings of radio-quiet quasars (RQQs) and RLQs by parameterizing X-ray luminosity as a sole function of UV-optical or radio luminosity and as a joint function of UV-optical radio luminosity, which also can be employed to determine these cosmological distances. By Bayesian information criterion (BIC), the data suggest that the X-ray luminosity of RQQs is indirectly correlative with radio luminosity because of the connection between UV-optical and radio luminosity. But for RLQs, the X-Ray luminosity is directly related to radio luminosity, and the correlations between X-ray, optical/UV, and radio luminosity increase with the ratio of monochromatic luminosities logR. Meanwhile, we compare the results from RLQs with different UV-optical power law index ${Γ_{UV}}$, the goodness of fit for RLQs with ${Γ_{UV}}\le 1.6$ seems to be better. Finally, we apply a combination of Type I RLQs and SN Ia Pantheon to verify the nature of dark energy concerning whether or not its density deviates from the constant, and give the statistical results.
△ Less
Submitted 14 October, 2023; v1 submitted 14 July, 2023;
originally announced July 2023.
-
A potential third-generation gravitational-wave detector based on autocorrelative weak-value amplification
Authors:
Jing-Hui Huang,
Fei-Fan He,
Xue-Ying Duan,
Guang-Jun Wang,
Xiang-Yun Hu
Abstract:
Reducing noises and enhancing signal-to-noise ratios (SNRs) have become critical for designing third-generation gravitational-wave (GW) detectors with a GW strain of less than $10^{-23}$/$\rm \sqrt{Hz}$. In this paper, we propose a potential third-generation GW detector based on autocorrelative weak-value amplification (AWVA) for GW detection with a strain of $h_g =$ $4 \times 10^{-25}$/…
▽ More
Reducing noises and enhancing signal-to-noise ratios (SNRs) have become critical for designing third-generation gravitational-wave (GW) detectors with a GW strain of less than $10^{-23}$/$\rm \sqrt{Hz}$. In this paper, we propose a potential third-generation GW detector based on autocorrelative weak-value amplification (AWVA) for GW detection with a strain of $h_g =$ $4 \times 10^{-25}$/$\rm \sqrt{Hz}$. In our scheme, a GW event induces a phase difference $Δφ$ by passing through an 11-bounce delay line, 10-km arm-length, zero-area Sagnac interferometer illuminated with a 1064-nm laser. Subsequently, $Δφ$ is amplified as the parameter of post-selection by choosing the appropriate pre-selected state and coupling strength in AWVA. In particular, we theoretically investigate the AWVA measurements for GW detection within the frequency band of 200 Hz $\leq$ $f_g$ $\leq$ 800 Hz, considering Gaussian noises with negative-decibel SNRs. The peak response of the AWVA sensitivity $κ(f_g)$ occurs at frequency $f_{g, max}$ = 500 Hz, which falls within the frequency band of interest of the current third-generation GW detectors. Our simulation results indicate that AWVA can demonstrate a measurable sensitivity of $Θ(f_g)$ within the frequency band of interest. Moreover, the robustness of WVA shows promising potential in mitigating the effects of Gaussian noises.
△ Less
Submitted 29 July, 2023; v1 submitted 11 June, 2023;
originally announced June 2023.
-
Is the core-cusp problem a matter of perspective: Jeans Anisotropic Modeling against numerical simulations
Authors:
Wenting Wang,
Ling Zhu,
Zhaozhou Li,
Yang Chen,
Jiaxin Han,
Feihong He,
Xiaohu Yang,
Yipeng Jing,
Carlos Frenk,
Jialu Nie,
Hao Tian,
Chao Liu,
Yanan Cao,
Xiaoqing Qiu,
John Helly,
Robert J. J. Grand,
Facundo A. Gomez
Abstract:
Mock member stars for 28 dwarf galaxies are constructed from the cosmological Auriga simulation, which reflect the dynamical status of realistic stellar tracers. The axis-symmetric Jeans Anisotropic Multi-Gaussian Expansion (JAM) modeling is applied to 6,000 star particles for each system, to recover the underlying matter distribution. The stellar or dark matter component individually is poorly re…
▽ More
Mock member stars for 28 dwarf galaxies are constructed from the cosmological Auriga simulation, which reflect the dynamical status of realistic stellar tracers. The axis-symmetric Jeans Anisotropic Multi-Gaussian Expansion (JAM) modeling is applied to 6,000 star particles for each system, to recover the underlying matter distribution. The stellar or dark matter component individually is poorly recovered, but the total profile is constrained more reasonably. The mass within the half-mass radius of tracers is recovered the tightest, and the mass between 200 and 300 pc, $M(200-300\mathrm{pc})$, is constrained ensemble unbiasedly, with a scatter of 0.167 dex. If using 2,000 particles and only line-of-sight velocities with typical errors, the scatter in $M(200-300\mathrm{pc})$ is increased by $\sim$50%. Quiescent Sagittarius dSph-like systems and star-forming systems with strong outflows show distinct features, with $M(200-300\mathrm{pc})$ mostly under-estimated for the former, and likely over-estimated for the latter. The biases correlate with the dynamical status, which is a result of contraction motions due to tidal effects in quiescent systems or galactic winds in star-forming systems, driving them out of equilibrium. After including Gaia DR3 proper motion errors, we find proper motions can be as useful as line-of-sight velocities for nearby systems at $<\sim$60 kpc. By extrapolating the actual density profiles and the dynamical constraints down to scales below the resolution, we find the mass within 150 pc can be constrained ensemble unbiasedly, with a scatter of $\sim$0.255 dex. In the end, we show that the contraction of member stars in nearby systems is detectable based on Gaia DR3 proper motion errors.
△ Less
Submitted 18 November, 2022; v1 submitted 24 June, 2022;
originally announced June 2022.
-
Measuring the Speed of Gravitational Waves from the First and Second Observing Run of Advanced LIGO and Advanced Virgo
Authors:
Xiaoshu Liu,
Vincent F. He,
Timothy M. Mikulski,
Daria Palenova,
Claire E. Williams,
Jolien Creighton,
Jay D. Tasson
Abstract:
The speed of gravitational waves for a single observation can be measured by the time delay among gravitational-wave detectors with Bayesian inference. Then multiple measurements can be combined to produce a more accurate result. From the near simultaneous detection of gravitational waves and gamma rays originating from GW170817/GRB 170817A, the speed of gravitational wave signal was found to be t…
▽ More
The speed of gravitational waves for a single observation can be measured by the time delay among gravitational-wave detectors with Bayesian inference. Then multiple measurements can be combined to produce a more accurate result. From the near simultaneous detection of gravitational waves and gamma rays originating from GW170817/GRB 170817A, the speed of gravitational wave signal was found to be the same as the the speed of the gamma rays to approximately one part in $10^{15}$. Here we present a different method of measuring the speed of gravitational waves, not based on an associated electromagnetic signal but instead by the measured transit time across a geographically separated network of detectors. While this method is far less precise, it provides an independent measurement of the speed of gravitational waves. For GW170817 a binary neutron star inspiral observed by Advanced LIGO and Advanced Virgo, by fixing sky localization of the source at the electromagnetic counterpart the speed of gravitational waves is constrained to 90% confidence interval (0.97c, 1.02c), where c is the speed of light in a vacuum. By combing seven BBH events and the BNS event from the second observing run of Advanced LIGO and Advanced Virgo, the 90% confidence interval is narrowed down to (0.97c, 1.01c). The accurate measurement of the speed of gravitational waves allows us to test the general theory of relativity. We further interpret these results within the test framework provided by the gravitational Standard-Model Extension (SME). In doing so, we obtain simultaneous constraints on 4 of the 9 nonbirefringent, nondispersive coefficients for Lorentz violation in the gravity sector of the SME and place limits on the anisotropy of the speed of gravity.
△ Less
Submitted 13 July, 2020; v1 submitted 6 May, 2020;
originally announced May 2020.