-
Ground test results of the micro-vibration interference for the x-ray microcalorimeter onboard XRISM
Authors:
Takashi Hasebe,
Ryuta Imamura,
Masahiro Tsujimoto,
Hisamitsu Awaki,
Meng P. Chiao,
Ryuichi Fujimoto,
Leslie S. Hartz,
Caroline A. Kilbourne,
Gary A. Sneiderman,
Yoh Takei,
Susumu Yasuda
Abstract:
Resolve is a payload hosting an X-ray microcalorimeter detector operated at 50 mK in the X-Ray Imaging and Spectroscopy Mission (XRISM). It is currently under development as part of an international collaboration and is planned to be launched in 2023. A primary technical concern is the micro-vibration interference in the sensitive microcalorimeter detector caused by the spacecraft bus components.…
▽ More
Resolve is a payload hosting an X-ray microcalorimeter detector operated at 50 mK in the X-Ray Imaging and Spectroscopy Mission (XRISM). It is currently under development as part of an international collaboration and is planned to be launched in 2023. A primary technical concern is the micro-vibration interference in the sensitive microcalorimeter detector caused by the spacecraft bus components. We conducted a series of verification tests in 2021-2022 on the ground, the results of which are reported here. We defined the micro-vibration interface between the spacecraft and the Resolve instrument. In the instrument-level test, the flight-model hardware was tested against the interface level by injecting it with micro-vibrations and evaluating the instrument response using the 50 mK stage temperature stability, ADR magnet current consumption rate, and detector noise spectra. We found strong responses when injecting micro-vibration at about 200, 380, and 610 Hz. In the former two cases, the beat between the injected frequency and cryocooler frequency harmonics were observed in the detector noise spectra. In the spacecraft-level test, the acceleration and instrument responses were measured with and without suspension of the entire spacecraft. The reaction wheels (RWs) and inertial reference units (IRUs), two major sources of micro-vibration among the bus components, were operated. In conclusion, the observed responses of Resolve are within the acceptable levels in the nominal operational range of the RWs and IRUs. There is no evidence that the resultant energy
resolution degradation is beyond the current allocation of noise budget.
△ Less
Submitted 2 March, 2023;
originally announced March 2023.
-
Tensor-to-scalar ratio forecasts for extended LiteBIRD frequency configurations
Authors:
U. Fuskeland,
J. Aumont,
R. Aurlien,
C. Baccigalupi,
A. J. Banday,
H. K. Eriksen,
J. Errard,
R. T. Génova-Santos,
T. Hasebe,
J. Hubmayr,
H. Imada,
N. Krachmalnicoff,
L. Lamagna,
G. Pisano,
D. Poletti,
M. Remazeilles,
K. L. Thompson,
L. Vacher,
I. K. Wehus,
S. Azzoni,
M. Ballardini,
R. B. Barreiro,
N. Bartolo,
A. Basyrov,
D. Beck
, et al. (92 additional authors not shown)
Abstract:
LiteBIRD is a planned JAXA-led CMB B-mode satellite experiment aiming for launch in the late 2020s, with a primary goal of detecting the imprint of primordial inflationary gravitational waves. Its current baseline focal-plane configuration includes 15 frequency bands between 40 and 402 GHz, fulfilling the mission requirements to detect the amplitude of gravitational waves with the total uncertaint…
▽ More
LiteBIRD is a planned JAXA-led CMB B-mode satellite experiment aiming for launch in the late 2020s, with a primary goal of detecting the imprint of primordial inflationary gravitational waves. Its current baseline focal-plane configuration includes 15 frequency bands between 40 and 402 GHz, fulfilling the mission requirements to detect the amplitude of gravitational waves with the total uncertainty on the tensor-to-scalar ratio, $δr$, down to $δr<0.001$. A key aspect of this performance is accurate astrophysical component separation, and the ability to remove polarized thermal dust emission is particularly important. In this paper we note that the CMB frequency spectrum falls off nearly exponentially above 300 GHz relative to the thermal dust SED, and a relatively minor high frequency extension can therefore result in even lower uncertainties and better model reconstructions. Specifically, we compare the baseline design with five extended configurations, while varying the underlying dust modeling, in each of which the HFT (High-Frequency Telescope) frequency range is shifted logarithmically towards higher frequencies, with an upper cutoff ranging between 400 and 600 GHz. In each case, we measure the tensor-to-scalar ratio $r$ uncertainty and bias using both parametric and minimum-variance component-separation algorithms. When the thermal dust sky model includes a spatially varying spectral index and temperature, we find that the statistical uncertainty on $r$ after foreground cleaning may be reduced by as much as 30--50 % by extending the upper limit of the frequency range from 400 to 600 GHz, with most of the improvement already gained at 500 GHz. We also note that a broader frequency range leads to better ability to discriminate between models through higher $χ^2$ sensitivity. (abridged)
△ Less
Submitted 15 August, 2023; v1 submitted 10 February, 2023;
originally announced February 2023.
-
Testbed preparation of a small prototype polarization modulator for LiteBIRD low-frequency telescope
Authors:
Thuong D. Hoang,
Tomotake Matsumura,
Ryota Takaku,
Takashi Hasebe,
Tommaso Ghigna,
Nobuhiko Katayama,
Yuki Sakurai,
Kunimoto Komatsu,
Teruhito Iida,
Yurika Hoshino,
Shinya Sugiyama,
Hirokazu Ishino
Abstract:
LiteBIRD is the Cosmic Microwave Background (CMB) radiation polarization satellite mission led by ISAS/JAXA. The main scientific goal is to search for primordial gravitational wave signals generated from the inflation epoch of the Universe. LiteBIRD telescopes employ polarization modulation units (PMU) using continuously rotating half-wave plates (HWP). The PMU is a crucial component to reach unpr…
▽ More
LiteBIRD is the Cosmic Microwave Background (CMB) radiation polarization satellite mission led by ISAS/JAXA. The main scientific goal is to search for primordial gravitational wave signals generated from the inflation epoch of the Universe. LiteBIRD telescopes employ polarization modulation units (PMU) using continuously rotating half-wave plates (HWP). The PMU is a crucial component to reach unprecedented sensitivity by mitigating systematic effects, including 1/f noise. We have developed a 1/10 scale prototype PMU of the LiteBIRD LFT, which has a 5-layer achromatic HWP and a diameter of 50 mm, spanning the observational frequency range of 34-161 GHz. The HWP is mounted on a superconducting magnetic bearing (SMB) as a rotor and levitated by a high-temperature superconductor as a stator. In this study, the entire PMU system is cooled down to 10 K in the cryostat chamber by a 4-K Gifford-McMahon (GM) cooler. We propagate an incident coherent millimeter-wave polarized signal throughout the rotating HWP and detect the modulated signal. We study the modulated optical signal and any rotational synchronous signals from the rotation mechanism. We describe the testbed system and the preliminary data acquired from this setup. This testbed is built to integrate the broadband HWP PMU and evaluate the potential systematic effects in the optical data. This way, we can plan with a full-scale model, which takes a long time for preparation and testing.
△ Less
Submitted 7 August, 2022;
originally announced August 2022.
-
Testing magnetic interference between TES detectors and the telescope environment for future CMB satellite missions
Authors:
Tommaso Ghigna,
Thuong Duc Hoang,
Takashi Hasebe,
Yurika Hoshino,
Nobuhiko Katayama,
Kunimoto Komatsu,
Adrian Lee,
Tomotake Matsumura,
Yuki Sakurai,
Shinya Sugiyama,
Aritoki Suzuki,
Christopher Raum,
Ryota Takaku,
Benjamin Westbrook
Abstract:
The two most common components of several upcoming CMB experiments are large arrays of superconductive TES (Transition-Edge Sensor) detectors and polarization modulator units, e.g. continuously-rotating Half-Wave Plates (HWP). A high detector count is necessary to increase the instrument raw sensitivity, however past experiments have shown that systematic effects are becoming one of the main limit…
▽ More
The two most common components of several upcoming CMB experiments are large arrays of superconductive TES (Transition-Edge Sensor) detectors and polarization modulator units, e.g. continuously-rotating Half-Wave Plates (HWP). A high detector count is necessary to increase the instrument raw sensitivity, however past experiments have shown that systematic effects are becoming one of the main limiting factors to reach the sensitivity required to detect primordial $B$-modes. Therefore, polarization modulators have become popular in recent years to mitigate several systematic effects. Polarization modulators based on HWP technologies require a rotating mechanism to spin the plate and modulate the incoming polarized signal. In order to minimize heat dissipation from the rotating mechanism, which is a stringent requirement particularly for a space mission like $LiteBIRD$, we can employ a superconductive magnetic bearing to levitate the rotor and achieve contactless rotation. A disadvantage of this technique is the associated magnetic fields generated by those systems. In this paper we investigate the effects on a TES detector prototype and find no detectable $T_c$ variations due to an applied constant (DC) magnetic field, and a non-zero TES response to varying (AC) magnetic fields. We quantify a worst-case TES responsivity to the applied AC magnetic field of $\sim10^5$ pA/G, and give a preliminary interpretation of the pick-up mechanism.
△ Less
Submitted 28 July, 2022; v1 submitted 27 July, 2022;
originally announced July 2022.
-
Probing Cosmic Inflation with the LiteBIRD Cosmic Microwave Background Polarization Survey
Authors:
LiteBIRD Collaboration,
E. Allys,
K. Arnold,
J. Aumont,
R. Aurlien,
S. Azzoni,
C. Baccigalupi,
A. J. Banday,
R. Banerji,
R. B. Barreiro,
N. Bartolo,
L. Bautista,
D. Beck,
S. Beckman,
M. Bersanelli,
F. Boulanger,
M. Brilenkov,
M. Bucher,
E. Calabrese,
P. Campeti,
A. Carones,
F. J. Casas,
A. Catalano,
V. Chan,
K. Cheung
, et al. (166 additional authors not shown)
Abstract:
LiteBIRD, the Lite (Light) satellite for the study of B-mode polarization and Inflation from cosmic background Radiation Detection, is a space mission for primordial cosmology and fundamental physics. The Japan Aerospace Exploration Agency (JAXA) selected LiteBIRD in May 2019 as a strategic large-class (L-class) mission, with an expected launch in the late 2020s using JAXA's H3 rocket. LiteBIRD is…
▽ More
LiteBIRD, the Lite (Light) satellite for the study of B-mode polarization and Inflation from cosmic background Radiation Detection, is a space mission for primordial cosmology and fundamental physics. The Japan Aerospace Exploration Agency (JAXA) selected LiteBIRD in May 2019 as a strategic large-class (L-class) mission, with an expected launch in the late 2020s using JAXA's H3 rocket. LiteBIRD is planned to orbit the Sun-Earth Lagrangian point L2, where it will map the cosmic microwave background (CMB) polarization over the entire sky for three years, with three telescopes in 15 frequency bands between 34 and 448 GHz, to achieve an unprecedented total sensitivity of 2.2$μ$K-arcmin, with a typical angular resolution of 0.5$^\circ$ at 100 GHz. The primary scientific objective of LiteBIRD is to search for the signal from cosmic inflation, either making a discovery or ruling out well-motivated inflationary models. The measurements of LiteBIRD will also provide us with insight into the quantum nature of gravity and other new physics beyond the standard models of particle physics and cosmology. We provide an overview of the LiteBIRD project, including scientific objectives, mission and system requirements, operation concept, spacecraft and payload module design, expected scientific outcomes, potential design extensions and synergies with other projects.
△ Less
Submitted 27 March, 2023; v1 submitted 6 February, 2022;
originally announced February 2022.
-
A Large Diameter Millimeter-Wave Low-Pass Filter Made of Alumina with Laser Ablated Anti-Reflection Coating
Authors:
Ryota Takaku,
Qi Wen,
Scott Cray,
Mark Devlin,
Simon Dicker,
Shaul Hanany,
Takashi Hasebe,
Teruhito Iida,
Nobuhiko Katayama,
Kuniaki Konishi,
Makoto Kuwata-Gonokami,
Tomotake Matsumura,
Norikatsu Mio,
Haruyuki Sakurai,
Yuki Sakurai,
Ryohei Yamada,
Junji Yumoto
Abstract:
We fabricated a 302 mm diameter low-pass filter made of alumina that has an anti-reflection coating (ARC) made with laser-ablated sub-wavelength structures (SWS). The filter has been integrated into and is operating with the MUSTANG2 instrument, which is coupled to the Green Bank Telescope. The average transmittance of the filter in the MUSTANG2 operating band between 75 and 105 GHz is 98%. Reflec…
▽ More
We fabricated a 302 mm diameter low-pass filter made of alumina that has an anti-reflection coating (ARC) made with laser-ablated sub-wavelength structures (SWS). The filter has been integrated into and is operating with the MUSTANG2 instrument, which is coupled to the Green Bank Telescope. The average transmittance of the filter in the MUSTANG2 operating band between 75 and 105 GHz is 98%. Reflective loss due to the ARC is 1%. The difference in transmission between the s- and p-polarization states is less than 1%. To within 1% accuracy we observe no variance in these results when transmission is measured in six independent filter spatial locations. The alumina filter replaced a prior MUSTANG2 Teflon filter. Data taken with the filter heat sunk to its nominal 40 K stage show performance consistent with expectations: a reduction of about 50% in filters-induced optical power load on the 300 mK stage, and in in-band optical loading on the detectors. It has taken less than 4 days to laser-ablate the SWS on both sides of the alumina disk. This is the first report of an alumina filter with SWS ARC deployed with an operating instrument, and the first demonstration of a large area fabrication of SWS with laser ablation.
△ Less
Submitted 21 January, 2022; v1 submitted 30 September, 2021;
originally announced September 2021.
-
Overview of the Medium and High Frequency Telescopes of the LiteBIRD satellite mission
Authors:
L. Montier,
B. Mot,
P. de Bernardis,
B. Maffei,
G. Pisano,
F. Columbro,
J. E. Gudmundsson,
S. Henrot-Versillé,
L. Lamagna,
J. Montgomery,
T. Prouvé,
M. Russell,
G. Savini,
S. Stever,
K. L. Thompson,
M. Tsujimoto,
C. Tucker,
B. Westbrook,
P. A. R. Ade,
A. Adler,
E. Allys,
K. Arnold,
D. Auguste,
J. Aumont,
R. Aurlien
, et al. (212 additional authors not shown)
Abstract:
LiteBIRD is a JAXA-led Strategic Large-Class mission designed to search for the existence of the primordial gravitational waves produced during the inflationary phase of the Universe, through the measurements of their imprint onto the polarization of the cosmic microwave background (CMB). These measurements, requiring unprecedented sensitivity, will be performed over the full sky, at large angular…
▽ More
LiteBIRD is a JAXA-led Strategic Large-Class mission designed to search for the existence of the primordial gravitational waves produced during the inflationary phase of the Universe, through the measurements of their imprint onto the polarization of the cosmic microwave background (CMB). These measurements, requiring unprecedented sensitivity, will be performed over the full sky, at large angular scales, and over 15 frequency bands from 34GHz to 448GHz. The LiteBIRD instruments consist of three telescopes, namely the Low-, Medium- and High-Frequency Telescope (respectively LFT, MFT and HFT). We present in this paper an overview of the design of the Medium-Frequency Telescope (89-224GHz) and the High-Frequency Telescope (166-448GHz), the so-called MHFT, under European responsibility, which are two cryogenic refractive telescopes cooled down to 5K. They include a continuous rotating half-wave plate as the first optical element, two high-density polyethylene (HDPE) lenses and more than three thousand transition-edge sensor (TES) detectors cooled to 100mK. We provide an overview of the concept design and the remaining specific challenges that we have to face in order to achieve the scientific goals of LiteBIRD.
△ Less
Submitted 1 February, 2021;
originally announced February 2021.
-
LiteBIRD: JAXA's new strategic L-class mission for all-sky surveys of cosmic microwave background polarization
Authors:
M. Hazumi,
P. A. R. Ade,
A. Adler,
E. Allys,
K. Arnold,
D. Auguste,
J. Aumont,
R. Aurlien,
J. Austermann,
C. Baccigalupi,
A. J. Banday,
R. Banjeri,
R. B. Barreiro,
S. Basak,
J. Beall,
D. Beck,
S. Beckman,
J. Bermejo,
P. de Bernardis,
M. Bersanelli,
J. Bonis,
J. Borrill,
F. Boulanger,
S. Bounissou,
M. Brilenkov
, et al. (213 additional authors not shown)
Abstract:
LiteBIRD, the Lite (Light) satellite for the study of B-mode polarization and Inflation from cosmic background Radiation Detection, is a space mission for primordial cosmology and fundamental physics. JAXA selected LiteBIRD in May 2019 as a strategic large-class (L-class) mission, with its expected launch in the late 2020s using JAXA's H3 rocket. LiteBIRD plans to map the cosmic microwave backgrou…
▽ More
LiteBIRD, the Lite (Light) satellite for the study of B-mode polarization and Inflation from cosmic background Radiation Detection, is a space mission for primordial cosmology and fundamental physics. JAXA selected LiteBIRD in May 2019 as a strategic large-class (L-class) mission, with its expected launch in the late 2020s using JAXA's H3 rocket. LiteBIRD plans to map the cosmic microwave background (CMB) polarization over the full sky with unprecedented precision. Its main scientific objective is to carry out a definitive search for the signal from cosmic inflation, either making a discovery or ruling out well-motivated inflationary models. The measurements of LiteBIRD will also provide us with an insight into the quantum nature of gravity and other new physics beyond the standard models of particle physics and cosmology. To this end, LiteBIRD will perform full-sky surveys for three years at the Sun-Earth Lagrangian point L2 for 15 frequency bands between 34 and 448 GHz with three telescopes, to achieve a total sensitivity of 2.16 micro K-arcmin with a typical angular resolution of 0.5 deg. at 100GHz. We provide an overview of the LiteBIRD project, including scientific objectives, mission requirements, top-level system requirements, operation concept, and expected scientific outcomes.
△ Less
Submitted 29 January, 2021;
originally announced January 2021.
-
Concept Design of Low Frequency Telescope for CMB B-mode Polarization satellite LiteBIRD
Authors:
Y. Sekimoto,
P. A. R. Ade,
A. Adler,
E. Allys,
K. Arnold,
D. Auguste,
J. Aumont,
R. Aurlien,
J. Austermann,
C. Baccigalupi,
A. J. Banday,
R. Banerji,
R. B. Barreiro,
S. Basak,
J. Beall,
D. Beck,
S. Beckman,
J. Bermejo,
P. de Bernardis,
M. Bersanelli,
J. Bonis,
J. Borrill,
F. Boulanger,
S. Bounissou,
M. Brilenkov
, et al. (212 additional authors not shown)
Abstract:
LiteBIRD has been selected as JAXA's strategic large mission in the 2020s, to observe the cosmic microwave background (CMB) $B$-mode polarization over the full sky at large angular scales. The challenges of LiteBIRD are the wide field-of-view (FoV) and broadband capabilities of millimeter-wave polarization measurements, which are derived from the system requirements. The possible paths of stray li…
▽ More
LiteBIRD has been selected as JAXA's strategic large mission in the 2020s, to observe the cosmic microwave background (CMB) $B$-mode polarization over the full sky at large angular scales. The challenges of LiteBIRD are the wide field-of-view (FoV) and broadband capabilities of millimeter-wave polarization measurements, which are derived from the system requirements. The possible paths of stray light increase with a wider FoV and the far sidelobe knowledge of $-56$ dB is a challenging optical requirement. A crossed-Dragone configuration was chosen for the low frequency telescope (LFT : 34--161 GHz), one of LiteBIRD's onboard telescopes. It has a wide field-of-view ($18^\circ \times 9^\circ$) with an aperture of 400 mm in diameter, corresponding to an angular resolution of about 30 arcminutes around 100 GHz. The focal ratio f/3.0 and the crossing angle of the optical axes of 90$^\circ$ are chosen after an extensive study of the stray light. The primary and secondary reflectors have rectangular shapes with serrations to reduce the diffraction pattern from the edges of the mirrors. The reflectors and structure are made of aluminum to proportionally contract from warm down to the operating temperature at $5\,$K. A 1/4 scaled model of the LFT has been developed to validate the wide field-of-view design and to demonstrate the reduced far sidelobes. A polarization modulation unit (PMU), realized with a half-wave plate (HWP) is placed in front of the aperture stop, the entrance pupil of this system. A large focal plane with approximately 1000 AlMn TES detectors and frequency multiplexing SQUID amplifiers is cooled to 100 mK. The lens and sinuous antennas have broadband capability. Performance specifications of the LFT and an outline of the proposed verification plan are presented.
△ Less
Submitted 15 January, 2021;
originally announced January 2021.
-
Updated design of the CMB polarization experiment satellite LiteBIRD
Authors:
H. Sugai,
P. A. R. Ade,
Y. Akiba,
D. Alonso,
K. Arnold,
J. Aumont,
J. Austermann,
C. Baccigalupi,
A. J. Banday,
R. Banerji,
R. B. Barreiro,
S. Basak,
J. Beall,
S. Beckman,
M. Bersanelli,
J. Borrill,
F. Boulanger,
M. L. Brown,
M. Bucher,
A. Buzzelli,
E. Calabrese,
F. J. Casas,
A. Challinor,
V. Chan,
Y. Chinone
, et al. (196 additional authors not shown)
Abstract:
Recent developments of transition-edge sensors (TESs), based on extensive experience in ground-based experiments, have been making the sensor techniques mature enough for their application on future satellite CMB polarization experiments. LiteBIRD is in the most advanced phase among such future satellites, targeting its launch in Japanese Fiscal Year 2027 (2027FY) with JAXA's H3 rocket. It will ac…
▽ More
Recent developments of transition-edge sensors (TESs), based on extensive experience in ground-based experiments, have been making the sensor techniques mature enough for their application on future satellite CMB polarization experiments. LiteBIRD is in the most advanced phase among such future satellites, targeting its launch in Japanese Fiscal Year 2027 (2027FY) with JAXA's H3 rocket. It will accommodate more than 4000 TESs in focal planes of reflective low-frequency and refractive medium-and-high-frequency telescopes in order to detect a signature imprinted on the cosmic microwave background (CMB) by the primordial gravitational waves predicted in cosmic inflation. The total wide frequency coverage between 34GHz and 448GHz enables us to extract such weak spiral polarization patterns through the precise subtraction of our Galaxy's foreground emission by using spectral differences among CMB and foreground signals. Telescopes are cooled down to 5Kelvin for suppressing thermal noise and contain polarization modulators with transmissive half-wave plates at individual apertures for separating sky polarization signals from artificial polarization and for mitigating from instrumental 1/f noise. Passive cooling by using V-grooves supports active cooling with mechanical coolers as well as adiabatic demagnetization refrigerators. Sky observations from the second Sun-Earth Lagrangian point, L2, are planned for three years. An international collaboration between Japan, USA, Canada, and Europe is sharing various roles. In May 2019, the Institute of Space and Astronautical Science (ISAS), JAXA selected LiteBIRD as the strategic large mission No. 2.
△ Less
Submitted 6 January, 2020;
originally announced January 2020.
-
The LiteBIRD Satellite Mission - Sub-Kelvin Instrument
Authors:
A. Suzuki,
P. A. R. Ade,
Y. Akiba,
D. Alonso,
K. Arnold,
J. Aumont,
C. Baccigalupi,
D. Barron,
S. Basak,
S. Beckman,
J. Borrill,
F. Boulanger,
M. Bucher,
E. Calabrese,
Y. Chinone,
H-M. Cho,
A. Cukierman,
D. W. Curtis,
T. de Haan,
M. Dobbs,
A. Dominjon,
T. Dotani,
L. Duband,
A. Ducout,
J. Dunkley
, et al. (127 additional authors not shown)
Abstract:
Inflation is the leading theory of the first instant of the universe. Inflation, which postulates that the universe underwent a period of rapid expansion an instant after its birth, provides convincing explanation for cosmological observations. Recent advancements in detector technology have opened opportunities to explore primordial gravitational waves generated by the inflation through B-mode (d…
▽ More
Inflation is the leading theory of the first instant of the universe. Inflation, which postulates that the universe underwent a period of rapid expansion an instant after its birth, provides convincing explanation for cosmological observations. Recent advancements in detector technology have opened opportunities to explore primordial gravitational waves generated by the inflation through B-mode (divergent-free) polarization pattern embedded in the Cosmic Microwave Background anisotropies. If detected, these signals would provide strong evidence for inflation, point to the correct model for inflation, and open a window to physics at ultra-high energies.
LiteBIRD is a satellite mission with a goal of detecting degree-and-larger-angular-scale B-mode polarization. LiteBIRD will observe at the second Lagrange point with a 400 mm diameter telescope and 2,622 detectors. It will survey the entire sky with 15 frequency bands from 40 to 400 GHz to measure and subtract foregrounds.
The U.S. LiteBIRD team is proposing to deliver sub-Kelvin instruments that include detectors and readout electronics. A lenslet-coupled sinuous antenna array will cover low-frequency bands (40 GHz to 235 GHz) with four frequency arrangements of trichroic pixels. An orthomode-transducer-coupled corrugated horn array will cover high-frequency bands (280 GHz to 402 GHz) with three types of single frequency detectors. The detectors will be made with Transition Edge Sensor (TES) bolometers cooled to a 100 milli-Kelvin base temperature by an adiabatic demagnetization refrigerator.The TES bolometers will be read out using digital frequency multiplexing with Superconducting QUantum Interference Device (SQUID) amplifiers. Up to 78 bolometers will be multiplexed with a single SQUID amplidier.
We report on the sub-Kelvin instrument design and ongoing developments for the LiteBIRD mission.
△ Less
Submitted 15 March, 2018; v1 submitted 22 January, 2018;
originally announced January 2018.
