-
Annular Groove Phase Mask coronagraph in diamond for mid-IR wavelengths: manufacturing assessment and performance analysis
Authors:
Christian Delacroix,
Pontus Forsberg,
Mikael Karlsson,
Dimitri Mawet,
Cédric Lenaerts,
Serge Habraken,
Charles Hanot,
Jean Surdej,
Anthony Boccaletti,
Jacques Baudrand
Abstract:
Phase-mask coronagraphs are known to provide high contrast imaging capabilities while preserving a small inner working angle, which allows searching for exoplanets or circumstellar disks with smaller telescopes or at longer wavelengths. The AGPM (Annular Groove Phase Mask, Mawet et al. 2005) is an optical vectorial vortex coronagraph (or vector vortex) induced by a rotationally symmetric subwavele…
▽ More
Phase-mask coronagraphs are known to provide high contrast imaging capabilities while preserving a small inner working angle, which allows searching for exoplanets or circumstellar disks with smaller telescopes or at longer wavelengths. The AGPM (Annular Groove Phase Mask, Mawet et al. 2005) is an optical vectorial vortex coronagraph (or vector vortex) induced by a rotationally symmetric subwavelength grating (i.e. with a period smaller than λ/n, λ being the observed wavelength and n the refractive index of the grating substrate). In this paper, we present our first mid- infrared AGPM prototypes imprinted on a diamond substrate. We firstly give an extrapolation of the expected coronagraph performances in the N-band (~10 μm), and prospects for down-scaling the technology to the most wanted L- band (~3.5 μm). We then present the manufacturing and measurement results, using diamond-optimized microfabrication techniques such as nano-imprint lithography (NIL) and reactive ion etching (RIE). Finally, the subwavelength grating profile metrology combines surface metrology (scanning electron microscopy, atomic force microscopy, white light interferometry) with diffractometry on an optical polarimetric bench and cross correlation with theoretical simulations using rigorous coupled wave analysis (RCWA).
△ Less
Submitted 1 December, 2014;
originally announced December 2014.
-
A diamond AGPM coronagraph for VISIR
Authors:
Christian Delacroix,
Oliver Absil,
Dimitri Mawet,
Charles Hanot,
Mikael Karlsson,
Pontus Forsberg,
Eric Pantin,
Jean Surdej,
Serge Habraken
Abstract:
In recent years, phase mask coronagraphy has become increasingly efficient in imaging the close environment of stars, enabling the search for exoplanets and circumstellar disks. Coronagraphs are ideally suited instruments, characterized by high dynamic range imaging capabilities, while preserving a small inner working angle. The AGPM (Annular Groove Phase Mask, Mawet et al. 2005) consists of a vec…
▽ More
In recent years, phase mask coronagraphy has become increasingly efficient in imaging the close environment of stars, enabling the search for exoplanets and circumstellar disks. Coronagraphs are ideally suited instruments, characterized by high dynamic range imaging capabilities, while preserving a small inner working angle. The AGPM (Annular Groove Phase Mask, Mawet et al. 2005) consists of a vector vortex induced by a rotationally symmetric subwavelength grating. This technique constitutes an almost unique solution to the achromatization at longer wavelengths (mid-infrared). For this reason, we have specially conceived a mid-infrared AGPM coronagraph for the forthcoming upgrade of VISIR, the mid-IR imager and spectrograph on the VLT at ESO (Paranal), in collaboration with members of the VISIR consortium. The implementation phase of the VISIR Upgrade Project is foreseen for May-August 2012, and the AGPM installed will cover the 11-13.2 μm spectral range. In this paper, we present the entire fabrication process of our AGPM imprinted on a diamond substrate. Diamond is an ideal material for mid-infrared wavelengths owing to its high transparency, small dispersion, extremely low thermal expansion and outstanding mechanical and chemical properties. The design process has been performed with an algorithm based on the rigorous coupled wave analysis (RCWA), and the micro-fabrication has been carried out using nano-imprint lithography and reactive ion etching. A precise grating profile metrology has also been conducted using cleaving techniques. Finally, we show the deposit of fiducials (i.e. centering marks) with Aerosol Jet Printing (AJP). We conclude with the ultimate coronagraph expected performances.
△ Less
Submitted 1 December, 2014;
originally announced December 2014.
-
A near-infrared interferometric survey of debris disc stars. III. First statistics based on 42 stars observed with CHARA/FLUOR
Authors:
O. Absil,
D. Defrère,
V. Coudé du Foresto,
E. Di Folco,
A. Mérand,
J. -C. Augereau,
S. Ertel,
C. Hanot,
P. Kervella,
B. Mollier,
N. Scott,
X. Che,
J. D. Monnier,
N. Thureau,
P. G. Tuthill,
T. A. ten Brummelaar,
H. A. McAlister,
J. Sturmann,
L. Sturmann,
N. Turner
Abstract:
(Abridged) Dust is expected to be ubiquitous in extrasolar planetary systems owing to the dynamical activity of minor bodies. Inner dust populations are, however, still poorly known because of the high contrast and small angular separation with respect to their host star. We aim to determine the level of near-infrared exozodiacal dust emission around a sample of 42 nearby main sequence stars with…
▽ More
(Abridged) Dust is expected to be ubiquitous in extrasolar planetary systems owing to the dynamical activity of minor bodies. Inner dust populations are, however, still poorly known because of the high contrast and small angular separation with respect to their host star. We aim to determine the level of near-infrared exozodiacal dust emission around a sample of 42 nearby main sequence stars with spectral types ranging from A to K and to investigate its correlation with various stellar parameters and with the presence of cold dust belts. We use high-precision K-band visibilities obtained with the FLUOR interferometer on the shortest baseline of the CHARA array. The calibrated visibilities are compared with the expected visibility of the stellar photosphere to assess whether there is an additional, fully resolved circumstellar emission. Near-infrared circumstellar emission amounting to about 1% of the stellar flux is detected around 13 of our 42 target stars. Follow-up observations showed that one of them (eps Cep) is associated with a stellar companion, while another one was detected around what turned out to be a giant star (kap CrB). The remaining 11 excesses found around single main sequence stars are most probably associated with hot circumstellar dust, yielding an overall occurrence rate of 28+8-6% for our (biased) sample. We show that the occurrence rate of bright exozodiacal discs correlates with spectral type, K-band excesses being more frequent around A-type stars. It also correlates with the presence of detectable far-infrared excess emission in the case of solar-type stars. This study provides new insight into the phenomenon of bright exozodiacal discs, showing that hot dust populations are probably linked to outer dust reservoirs in the case of solar-type stars. For A-type stars, no clear conclusion can be made regarding the origin of the detected near-infrared excesses.
△ Less
Submitted 9 July, 2013;
originally announced July 2013.
-
L'-band AGPM vector vortex coronagraph's first light on VLT/NACO: Discovery of a late-type companion at two beamwidths from an F0V star
Authors:
D. Mawet,
O. Absil,
C. Delacroix,
J. H. Girard,
J. Milli,
J. O'Neil,
P. Baudoz,
A. Boccaletti,
P. Bourget,
V. Christiaens,
P. Forsberg,
F. Gonte,
S. Habraken,
C. Hanot,
M. Karlsson,
M. Kasper,
J. -L. Lizon,
K. Muzic,
E. Pena,
R. Olivier,
N. Slusarenko,
L. E. Tacconi-Garman,
J. Surdej
Abstract:
Context. High contrast imaging has thoroughly combed through the limited search space accessible with first-generation ground-based adaptive optics instruments and the Hubble Space Telescope. Only a few objects were discovered, and many non-detections reported and statistically interpreted. The field is now in need of a technological breakthrough.
Aim. Our aim is to open a new search space with…
▽ More
Context. High contrast imaging has thoroughly combed through the limited search space accessible with first-generation ground-based adaptive optics instruments and the Hubble Space Telescope. Only a few objects were discovered, and many non-detections reported and statistically interpreted. The field is now in need of a technological breakthrough.
Aim. Our aim is to open a new search space with first-generation systems such as NACO at the Very Large Telescope, by providing ground-breaking inner working angle (IWA) capabilities in the L' band. The L' band is a sweet spot for high contrast coronagraphy since the planet-to-star brightness ratio is favorable, while the Strehl ratio is naturally higher.
Methods. An annular groove phase mask (AGPM) vector vortex coronagraph optimized for the L' band, made from diamond subwavelength gratings was manufactured and qualified in the lab. The AGPM enables high contrast imaging at very small IWA, potentially being the key to unexplored discovery space.
Results. Here we present the installation and successful on-sky tests of an L'-band AGPM coronagraph on NACO. Using angular differential imaging, which is well suited to the rotational symmetry of the AGPM, we demonstrated a ΔL' > 7.5 mag contrast from an IWA ~ 0".09 onwards, during average seeing conditions, and for total integration times of a few hundred seconds.
△ Less
Submitted 3 April, 2013;
originally announced April 2013.
-
Deep near-infrared interferometric search for low-mass companions around beta Pictoris
Authors:
Olivier Absil,
Jean-Baptiste Le Bouquin,
Jeremy Lebreton,
Jean-Charles Augereau,
Myriam Benisty,
Gael Chauvin,
Charles Hanot,
Antoine Merand,
Guillaume Montagnier
Abstract:
Aims. We search for low-mass companions in the innermost region (<300 mas, i.e., 6 AU) of the beta Pic planetary system. Methods. We obtained interferometric closure phase measurements in the K-band with the VLTI/AMBER instrument used in its medium spectral resolution mode. Fringe stabilization was provided by the FINITO fringe tracker. Results. In a search region of between 2 and 60 mas in radius…
▽ More
Aims. We search for low-mass companions in the innermost region (<300 mas, i.e., 6 AU) of the beta Pic planetary system. Methods. We obtained interferometric closure phase measurements in the K-band with the VLTI/AMBER instrument used in its medium spectral resolution mode. Fringe stabilization was provided by the FINITO fringe tracker. Results. In a search region of between 2 and 60 mas in radius, our observations exclude at 3 sigma significance the presence of companions with K-band contrasts greater than 5e-3 for 90% of the possible positions in the search zone (i.e., 90% completeness). The median 1-sigma error bar in the contrast of potential companions within our search region is 1.2e-3. The best fit to our data set using a binary model is found for a faint companion located at about 14.4 mas from beta Pic, which has a contrast of 1.8e-3 \pm 1.1e-3 (a result consistent with the absence of companions). For angular separations larger than 60 mas, both time smearing and field-of-view limitations reduce the sensitivity. Conclusions. We can exclude the presence of brown dwarfs with masses higher than 29 Mjup (resp. 47 Mjup) at a 50% (resp. 90%) completeness level within the first few AUs around beta Pic. Interferometric closure phases offer a promising way to directly image low-mass companions in the close environment of nearby young stars.
△ Less
Submitted 7 September, 2010;
originally announced September 2010.
-
The Optimal Gravitational Lens Telescope
Authors:
J. Surdej,
C. Delacroix,
P. Coleman,
M. Dominik,
S. Habraken,
C. Hanot,
H. Le Coroller,
D. Mawet,
H. Quintana,
T. Sadibekova,
D. Sluse
Abstract:
Given an observed gravitational lens mirage produced by a foreground deflector (cf. galaxy, quasar, cluster,...), it is possible via numerical lens inversion to retrieve the real source image, taking full advantage of the magnifying power of the cosmic lens. This has been achieved in the past for several remarkable gravitational lens systems. Instead, we propose here to invert an observed multiply…
▽ More
Given an observed gravitational lens mirage produced by a foreground deflector (cf. galaxy, quasar, cluster,...), it is possible via numerical lens inversion to retrieve the real source image, taking full advantage of the magnifying power of the cosmic lens. This has been achieved in the past for several remarkable gravitational lens systems. Instead, we propose here to invert an observed multiply imaged source directly at the telescope using an ad-hoc optical instrument which is described in the present paper. Compared to the previous method, this should allow one to detect fainter source features as well as to use such an optimal gravitational lens telescope to explore even fainter objects located behind and near the lens. Laboratory and numerical experiments illustrate this new approach.
△ Less
Submitted 5 June, 2010;
originally announced June 2010.
-
Optical Vectorial Vortex Coronagraphs using Liquid Crystal Polymers: theory, manufacturing and laboratory demonstration
Authors:
D. Mawet,
E. Serabyn,
K. Liewer,
Ch. Hanot,
S. McEldowney,
D. Shemo,
N. O'Brien
Abstract:
In this paper, after briefly reviewing the theory of vectorial vortices, we describe our technological approach to generating the necessary phase helix, and report results obtained with the first optical vectorial vortex coronagraph (OVVC) in the laboratory. To implement the geometrical phase ramp, we make use of Liquid Crystal Polymers (LCP), which we believe to be the most efficient technologi…
▽ More
In this paper, after briefly reviewing the theory of vectorial vortices, we describe our technological approach to generating the necessary phase helix, and report results obtained with the first optical vectorial vortex coronagraph (OVVC) in the laboratory. To implement the geometrical phase ramp, we make use of Liquid Crystal Polymers (LCP), which we believe to be the most efficient technological path to quickly synthesize optical vectorial vortices of virtually any topological charge. With the first prototype device of topological charge 2, a maximum peak-to-peak attenuation of 1.4e-2 and a residual light level of 3e-5 at an angular separation of 3.5 l/d (at which point our current noise floor is reached) have been obtained at a wavelength of 1.55 microns. These results demonstrate the validity of using space-variant birefringence distributions to generate a new family of coronagraphs usable in natural unpolarized light, opening a path to high performance coronagraphs that are achromatic and have low-sensitivity to low-order wavefront aberrations.
△ Less
Submitted 1 December, 2009;
originally announced December 2009.
-
Exoplanet Characterization and the Search for Life
Authors:
J. Kasting,
W. Traub,
A. Roberge,
A. Leger,
A. Schwartz,
A. Wooten,
A. Vosteen,
A. Lo,
A. Brack,
A. Tanner,
A. Coustenis,
B. Lane,
B. Oppenheimer,
B. Mennesson,
B. Lopez,
C. Grillmair,
C. Beichman,
C. Cockell,
C. Hanot,
C. McCarthy,
C. Stark,
C. Marois,
C. Aime,
D. Angerhausen,
D. Montes
, et al. (97 additional authors not shown)
Abstract:
Over 300 extrasolar planets (exoplanets) have been detected orbiting nearby stars. We now hope to conduct a census of all planets around nearby stars and to characterize their atmospheres and surfaces with spectroscopy. Rocky planets within their star's habitable zones have the highest priority, as these have the potential to harbor life. Our science goal is to find and characterize all nearby e…
▽ More
Over 300 extrasolar planets (exoplanets) have been detected orbiting nearby stars. We now hope to conduct a census of all planets around nearby stars and to characterize their atmospheres and surfaces with spectroscopy. Rocky planets within their star's habitable zones have the highest priority, as these have the potential to harbor life. Our science goal is to find and characterize all nearby exoplanets; this requires that we measure the mass, orbit, and spectroscopic signature of each one at visible and infrared wavelengths. The techniques for doing this are at hand today. Within the decade we could answer long-standing questions about the evolution and nature of other planetary systems, and we could search for clues as to whether life exists elsewhere in our galactic neighborhood.
△ Less
Submitted 15 November, 2009;
originally announced November 2009.
-
Nulling interferometry: impact of exozodiacal clouds on the performance of future life-finding space missions
Authors:
D. Defrère,
O. Absil,
R. den Hartog,
C. Hanot,
C. Stark
Abstract:
Earth-sized planets around nearby stars are being detected for the first time by ground-based radial velocity and space-based transit surveys. This milestone is opening the path towards the definition of missions able to directly detect the light from these planets, with the identification of bio-signatures as one of the main objectives. In that respect, both ESA and NASA have identified nulling…
▽ More
Earth-sized planets around nearby stars are being detected for the first time by ground-based radial velocity and space-based transit surveys. This milestone is opening the path towards the definition of missions able to directly detect the light from these planets, with the identification of bio-signatures as one of the main objectives. In that respect, both ESA and NASA have identified nulling interferometry as one of the most promising techniques. The ability to study distant planets will however depend on exozodiacal dust clouds surrounding the target stars. In this paper, we assess the impact of exozodiacal dust clouds on the performance of an infrared nulling interferometer in the Emma X-array configuration. For the nominal mission architecture with 2-m aperture telescopes, we found that point-symmetric exozodiacal dust discs about 100 times denser than the solar zodiacal cloud can be tolerated in order to survey at least 150 targets during the mission lifetime. Considering modeled resonant structures created by an Earth-like planet orbiting at 1 AU around a Sun-like star, we show that the tolerable dust density for planet detection goes down to about 15 times the solar zodiacal density for face-on systems and decreases with the disc inclination. The upper limits on the tolerable exozodiacal dust density derived in this study must be considered as rather pessimistic, but still give a realistic estimation of the typical sensitivity that we will need to reach on exozodiacal discs in order to prepare the scientific programme of future Earth-like planet characterisation missions.
△ Less
Submitted 19 October, 2009;
originally announced October 2009.