-
TOI-4641b: An Aligned Warm Jupiter Orbiting a Bright (V=7.5) Rapidly Rotating F-star
Authors:
Allyson Bieryla,
George Zhou,
Juliana García-Mejía,
Tyler R. Farnington,
David W. Latham,
Brad Carter,
Jiayin Dong,
Chelsea X. Huang,
Simon J. Murphy,
Avi Shporer,
Karen A. Collins,
Samuel N. Quinn,
Mark E. Everett,
Lars A. Buchhave,
René Tronsgaard,
David Charbonneau,
Marshall C. Johnson,
Gilbert A. Esquerdo,
Michael Calkins,
Perry Berlind,
Jon M. Jenkins,
George R. Ricker,
Sara Seager,
Joshua N. Winn,
Thomas Barclay
, et al. (3 additional authors not shown)
Abstract:
We report the discovery of TOI-4641b, a warm Jupiter transiting a rapidly rotating F-type star with a stellar effective temperature of 6560 K. The planet has a radius of 0.73 $R_{Jup}$, a mass smaller than 3.87 $M_{Jup}$ $(3σ)$, and a period of 22.09 days. It is orbiting a bright star (V=7.5 mag) on a circular orbit with a radius and mass of 1.73 $R_{\odot}$ and 1.41 $M_{\odot}$. Follow-up ground-…
▽ More
We report the discovery of TOI-4641b, a warm Jupiter transiting a rapidly rotating F-type star with a stellar effective temperature of 6560 K. The planet has a radius of 0.73 $R_{Jup}$, a mass smaller than 3.87 $M_{Jup}$ $(3σ)$, and a period of 22.09 days. It is orbiting a bright star (V=7.5 mag) on a circular orbit with a radius and mass of 1.73 $R_{\odot}$ and 1.41 $M_{\odot}$. Follow-up ground-based photometry was obtained using the Tierras Observatory. Two transits were also observed with the Tillinghast Reflector Echelle Spectrograph (TRES), revealing the star to have a low projected spin-orbit angle ($λ$=$1.41^{+0.76}_{-0.76}$ degrees). Such obliquity measurements for stars with warm Jupiters are relatively few, and may shed light on the formation of warm Jupiters. Among the known planets orbiting hot and rapidly-rotating stars, TOI-4641b is one of the longest-period planets to be thoroughly characterized. Unlike hot Jupiters around hot stars which are more often misaligned, the warm Jupiter TOI-4641b is found in a well-aligned orbit. Future exploration of this parameter space can add one more dimension to the star-planet orbital obliquity distribution that has been well-sampled for hot Jupiters.
△ Less
Submitted 6 December, 2023;
originally announced December 2023.
-
A resonant sextuplet of sub-Neptunes transiting the bright star HD 110067
Authors:
R. Luque,
H. P. Osborn,
A. Leleu,
E. Pallé,
A. Bonfanti,
O. Barragán,
T. G. Wilson,
C. Broeg,
A. Collier Cameron,
M. Lendl,
P. F. L. Maxted,
Y. Alibert,
D. Gandolfi,
J. -B. Delisle,
M. J. Hooton,
J. A. Egger,
G. Nowak,
M. Lafarga,
D. Rapetti,
J. D. Twicken,
J. C. Morales,
I. Carleo,
J. Orell-Miquel,
V. Adibekyan,
R. Alonso
, et al. (127 additional authors not shown)
Abstract:
Planets with radii between that of the Earth and Neptune (hereafter referred to as sub-Neptunes) are found in close-in orbits around more than half of all Sun-like stars. Yet, their composition, formation, and evolution remain poorly understood. The study of multi-planetary systems offers an opportunity to investigate the outcomes of planet formation and evolution while controlling for initial con…
▽ More
Planets with radii between that of the Earth and Neptune (hereafter referred to as sub-Neptunes) are found in close-in orbits around more than half of all Sun-like stars. Yet, their composition, formation, and evolution remain poorly understood. The study of multi-planetary systems offers an opportunity to investigate the outcomes of planet formation and evolution while controlling for initial conditions and environment. Those in resonance (with their orbital periods related by a ratio of small integers) are particularly valuable because they imply a system architecture practically unchanged since its birth. Here, we present the observations of six transiting planets around the bright nearby star HD 110067. We find that the planets follow a chain of resonant orbits. A dynamical study of the innermost planet triplet allowed the prediction and later confirmation of the orbits of the rest of the planets in the system. The six planets are found to be sub-Neptunes with radii ranging from 1.94 to 2.85 Re. Three of the planets have measured masses, yielding low bulk densities that suggest the presence of large hydrogen-dominated atmospheres.
△ Less
Submitted 29 November, 2023;
originally announced November 2023.
-
First on-sky results of a FIOS prototype, a Fabry Perot Based Instrument for Oxygen Searches
Authors:
Surangkhana Rukdee,
Sagi Ben-Ami,
Mercedes López-Morales,
Andrew Szentgyorgyi,
David Charbonneau,
Juliana García-Mejía,
Johannes Buchner
Abstract:
The upcoming Extremely Large Telescopes (ELTs) are expected to have the collecting area required to detect potential biosignature gases such as molecular oxygen, $\mathrm{O_2}$, in the atmosphere of terrestrial planets around nearby stars. One of the most promising detection methods is transmission spectroscopy. To maximize our capability to detect $\mathrm{O_2}$ using this method, spectral resolu…
▽ More
The upcoming Extremely Large Telescopes (ELTs) are expected to have the collecting area required to detect potential biosignature gases such as molecular oxygen, $\mathrm{O_2}$, in the atmosphere of terrestrial planets around nearby stars. One of the most promising detection methods is transmission spectroscopy. To maximize our capability to detect $\mathrm{O_2}$ using this method, spectral resolutions $\mathrm{R}\geq 300,000$ are required to fully resolve the absorption lines in an Earth-like exoplanet atmosphere and disentangle the signal from telluric lines. Current high-resolution spectrographs typically achieve a spectral resolution of $\mathrm{R}\sim100,000$. Increasing the resolution in seeing limited observations/instruments requires drastically larger optical components, making these instruments even more expensive and hard to fabricate and assemble. Instead, we demonstrate a new approach to high-resolution spectroscopy. We implemented an ultra-high spectral resolution booster to be coupled in front of a high-resolution spectrograph. The instrument is based on a chained Fabry Perot array which generates a hyperfine spectral profile. We present on-sky telluric observations with a lab demonstrator. Depending on the configuration, this two-arm prototype reaches a resolution of R=250,000-350,000. After carefully modeling the prototype's behavior, we propose a Fabry Perot Interferometer (FPI) design for an eight-arm array configuration aimed at ELTs capable of exceeding R=300,000. The novel FPI resolution booster can be plugged in at the front end of an existing R=100,000 spectrograph to overwrite the spectral profile with a higher resolution for exoplanet atmosphere studies.
△ Less
Submitted 27 July, 2023;
originally announced July 2023.
-
The Tierras Observatory: An ultra-precise photometer to characterize nearby terrestrial exoplanets
Authors:
Juliana García-Mejía,
David Charbonneau,
Daniel Fabricant,
Jonathan M. Irwin,
Robert Fata,
Joseph M. Zajac,
Peter E. Doherty
Abstract:
We report on the status of the Tierras Observatory, a refurbished 1.3-m ultra-precise fully-automated photometer located at the F. L. Whipple Observatory atop Mt. Hopkins, Arizona. Tierras is designed to limit systematic errors, notably precipitable water vapor (PWV), to 250 ppm, enabling the characterization of terrestrial planet transits orbiting $< 0.3 \, R_{\odot}$ stars, as well as the potent…
▽ More
We report on the status of the Tierras Observatory, a refurbished 1.3-m ultra-precise fully-automated photometer located at the F. L. Whipple Observatory atop Mt. Hopkins, Arizona. Tierras is designed to limit systematic errors, notably precipitable water vapor (PWV), to 250 ppm, enabling the characterization of terrestrial planet transits orbiting $< 0.3 \, R_{\odot}$ stars, as well as the potential discovery of exo-moons and exo-rings. The design choices that will enable our science goals include: a four-lens focal reducer and field-flattener to increase the field-of-view of the telescope from a $11.94'$ to a $0.48^{\circ}$ side; a custom narrow bandpass ($40.2$ nm FWHM) filter centered around $863.5$ nm to minimize PWV errors known to limit ground-based photometry of red dwarfs; and a deep-depletion $4K \times 4K$ CCD with a 300ke-full well and QE$>85\%$ in our bandpass, operating in frame transfer mode. We are also pursuing the design of a set of baffles to minimize the significant amount of scattered light reaching the image plane. Tierras will begin science operations in early 2021.
△ Less
Submitted 17 December, 2020;
originally announced December 2020.
-
Characterization of a multi-etalon array for ultra-high resolution spectroscopy
Authors:
Surangkhana Rukdee,
Sagi Ben-Ami,
Andrew Szentgyorgyi,
Mercedes López-Morales,
David Charbonneau,
Juliana García-Mejía
Abstract:
The upcoming Extremely Large Telescopes (ELTs) are expected to have the collecting area required to detect potential biosignature gases in the atmosphere of rocky planets around nearby low-mass stars. Some efforts are currently focusing on searching for molecular oxygen (O2), since O2 is a known biosignature on Earth. One of the most promising methods to search for O2 is transmission spectroscopy…
▽ More
The upcoming Extremely Large Telescopes (ELTs) are expected to have the collecting area required to detect potential biosignature gases in the atmosphere of rocky planets around nearby low-mass stars. Some efforts are currently focusing on searching for molecular oxygen (O2), since O2 is a known biosignature on Earth. One of the most promising methods to search for O2 is transmission spectroscopy in which high-resolution spectroscopy is combined with cross-correlation techniques. In this method, high spectral resolution is required both to resolve the exoplanet's O2 lines and to separate them from foreground telluric absorption. While current astronomical spectrographs typically achieve a spectral resolution of 100,000, recent studies show that resolutions of 300,000 -- 400,000 are optimal to detect O2 in the atmosphere of earth analogs with the ELTs. Fabry Perot Interferometer (FPI) arrays have been proposed as a relatively low-cost way to reach these resolutions. In this paper, we present performance results for our 2-FPI array lab prototype, which reaches a resolving power of 600,000. We further discuss the use of multi-cavity etalons (dualons) to be resolution boosters for existing spectrographs.
△ Less
Submitted 7 December, 2020;
originally announced December 2020.
-
The HD 217107 Planetary System: Twenty Years of Radial Velocity Measurements
Authors:
Mark R. Giovinazzi,
Cullen H. Blake,
Jason D. Eastman,
Jason Wright,
Nate McCrady,
Rob Wittenmyer,
John A. Johnson,
Peter Plavchan,
David H. Sliski,
Maurice L. Wilson,
Samson A. Johnson,
Jonathan Horner,
Stephen R. Kane,
Audrey Houghton,
Juliana García-Mejía,
Joseph P. Glaser
Abstract:
The hot Jupiter HD 217107 b was one of the first exoplanets detected using the radial velocity (RV) method, originally reported in the literature in 1999. Today, precise RV measurements of this system span more than 20 years, and there is clear evidence for a longer-period companion, HD 217107 c. Interestingly, both the short-period planet ($P_\mathrm{b}\sim7.13$ d) and long-period planet (…
▽ More
The hot Jupiter HD 217107 b was one of the first exoplanets detected using the radial velocity (RV) method, originally reported in the literature in 1999. Today, precise RV measurements of this system span more than 20 years, and there is clear evidence for a longer-period companion, HD 217107 c. Interestingly, both the short-period planet ($P_\mathrm{b}\sim7.13$ d) and long-period planet ($P_\mathrm{c}\sim5059$ d) have significantly eccentric orbits ($e_\mathrm{b}\sim0.13$ and $e_\mathrm{c}\sim0.40$). We present 42 additional RV measurements of this system obtained with the MINERVA telescope array and carry out a joint analysis with previously published RV measurements from four different facilities. We confirm and refine the previously reported orbit of the long-period companion. HD 217107 b is one of a relatively small number of hot Jupiters with an eccentric orbit, opening up the possibility of detecting precession of the planetary orbit due to General Relativistic effects and perturbations from other planets in the system. In this case, the argument of periastron, $ω$, is predicted to change at the level of $\sim$0.8$^\circ$ century$^{-1}$. Despite the long time baseline of our observations and the high quality of the RV measurements, we are only able to constrain the precession to be $\dotω<65.9^\circ$ century$^{-1}$. We discuss the limitations of detecting the subtle effects of precession in exoplanet orbits using RV data.
△ Less
Submitted 25 September, 2020;
originally announced September 2020.
-
Optimizing Ground-based Observations of O2 in Earth Analogs
Authors:
Mercedes Lopez-Morales,
Sagi Ben-Ami,
Gonzalo Gonzalez-Abad,
Juliana Garcia-Mejia,
Jeremy Dietrich,
Andrew Szentgyorgyi
Abstract:
We present the result of calculations to optimize the search for molecular oxygen (O2) in Earth analogs transiting around nearby, low-mass stars using ground-based, high-resolution, Doppler shift techniques. We investigate a series of parameters, namely spectral resolution, wavelength coverage of the observations, and sky coordinates and systemic velocity of the exoplanetary systems, to find the v…
▽ More
We present the result of calculations to optimize the search for molecular oxygen (O2) in Earth analogs transiting around nearby, low-mass stars using ground-based, high-resolution, Doppler shift techniques. We investigate a series of parameters, namely spectral resolution, wavelength coverage of the observations, and sky coordinates and systemic velocity of the exoplanetary systems, to find the values that optimize detectability of O2. We find that increasing the spectral resolution of observations to R = 300,000 - 400,000 from the typical R ~ 100,000, more than doubles the average depth of O2 lines in planets with atmospheres similar to Earth's. Resolutions higher than about 500,000 do not produce significant gains in the depths of the O2 lines. We confirm that observations in the O2 A-band are the most efficient except for M9V host stars, for which observations in the O2 NIR-band are more efficient. Combining observations in the O2 A, B, and NIR -bands can reduce the number of transits needed to produce a detection of O2 by about 1/3 in the case of white noise limited observations. However, that advantage disappears in the presence of typical levels of red noise. Therefore, combining observations in more than one band produces no significant gains versus observing only in the A-band, unless red-noise can be significantly reduced. Blending between the exoplanet's O2 lines and telluric O2 lines is a known problem. We find that problem can be alleviated by increasing the resolution of the observations, and by giving preference to targets near the ecliptic.
△ Less
Submitted 14 May, 2019;
originally announced May 2019.
-
First radial velocity results from the MINiature Exoplanet Radial Velocity Array (MINERVA)
Authors:
Maurice L. Wilson,
Jason D. Eastman,
Matthew A. Cornachione,
Sharon X. Wang,
Samson A. Johnson,
David H. Sliski,
William J. Schap III,
Timothy D. Morton,
John Asher Johnson,
Nate McCrady,
Jason T. Wright,
Robert A. Wittenmyer,
Peter Plavchan,
Cullen H. Blake,
Jonathan J. Swift,
Michael Bottom,
Ashley D. Baker,
Stuart I. Barnes,
Perry Berlind,
Eric Blackhurst,
Thomas G. Beatty,
Adam S. Bolton,
Bryson Cale,
Michael L. Calkins,
Ana Colón
, et al. (30 additional authors not shown)
Abstract:
The MINiature Exoplanet Radial Velocity Array (MINERVA) is a dedicated observatory of four 0.7m robotic telescopes fiber-fed to a KiwiSpec spectrograph. The MINERVA mission is to discover super-Earths in the habitable zones of nearby stars. This can be accomplished with MINERVA's unique combination of high precision and high cadence over long time periods. In this work, we detail changes to the MI…
▽ More
The MINiature Exoplanet Radial Velocity Array (MINERVA) is a dedicated observatory of four 0.7m robotic telescopes fiber-fed to a KiwiSpec spectrograph. The MINERVA mission is to discover super-Earths in the habitable zones of nearby stars. This can be accomplished with MINERVA's unique combination of high precision and high cadence over long time periods. In this work, we detail changes to the MINERVA facility that have occurred since our previous paper. We then describe MINERVA's robotic control software, the process by which we perform 1D spectral extraction, and our forward modeling Doppler pipeline. In the process of improving our forward modeling procedure, we found that our spectrograph's intrinsic instrumental profile is stable for at least nine months. Because of that, we characterized our instrumental profile with a time-independent, cubic spline function based on the profile in the cross dispersion direction, with which we achieved a radial velocity precision similar to using a conventional "sum-of-Gaussians" instrumental profile: 1.8 m s$^{-1}$ over 1.5 months on the RV standard star HD 122064. Therefore, we conclude that the instrumental profile need not be perfectly accurate as long as it is stable. In addition, we observed 51 Peg and our results are consistent with the literature, confirming our spectrograph and Doppler pipeline are producing accurate and precise radial velocities.
△ Less
Submitted 11 September, 2019; v1 submitted 22 April, 2019;
originally announced April 2019.
-
High Resolution Spectroscopy using Fabry Perot Intereferometer Arrays: An Application to Searches for O$_{2}$ in Exoplanetary Atmospheres
Authors:
Sagi Ben-Ami,
Mercedes López-Morales,
Juliana Garcia-Mejia,
Gonzalo Gonzalez Abad,
Andrew Szentgyorgyi
Abstract:
We present a novel implementation for extremely high resolution spectroscopy using custom-designed Fabry Perot Interferometer (FPI) arrays. For a given telescope aperture at the seeing limited case, these arrays can achieve resolutions well in excess of ${\rm R\sim10^5}$ using optical elements orders of magnitude smaller in size than standard echelle spectrographs of similar resolution. We apply t…
▽ More
We present a novel implementation for extremely high resolution spectroscopy using custom-designed Fabry Perot Interferometer (FPI) arrays. For a given telescope aperture at the seeing limited case, these arrays can achieve resolutions well in excess of ${\rm R\sim10^5}$ using optical elements orders of magnitude smaller in size than standard echelle spectrographs of similar resolution. We apply this method specifically to the search for molecular oxygen in exoplanetary atmospheres using the ${\rm O_2}$ A-band at 0.76 ${\rm μm}$, and show how a FPI array composed of $\sim10$ etalons with parameters optimized for this science case can record ${\rm R=3-5\,\cdot10^5}$ spectra covering the full ${\rm O_2}$ A-band. Using simulated observations of the atmosphere of a transiting nearby Earth-like planet, we show how observations with a FPI array coupled to a long-slit spectrograph can reduce the number of transit observations needed to produce a ${\rm 3σ}$ detection of ${\rm O_2}$ by $\sim30\%$ compared to observations with a ${\rm R=10^5}$ echelle spectrograph. This, in turn, leads to a decrease in an observing program duration of several years. The number of transits needed for a ${\rm 3σ}$ detection can be further reduced by increasing the efficiency of FPI arrays using dualons (an etalon with a buried reflective layer), and by coupling the FPI array to a dedicated spectrograph optimized for the ${\rm O_2}$ A-band.
△ Less
Submitted 30 May, 2018;
originally announced May 2018.