-
The external photoevaporation of structured protoplanetary disks
Authors:
Matías Gárate,
Paola Pinilla,
Thomas J. Haworth,
Stefano Facchini
Abstract:
The dust in planet-forming disks evolve rapidly through growth and radial drift, and external photoevaporation also contributes to this evolution in massive star-forming regions. We test whether the presence of substructures can explain the survival of the dust component and observed millimeter continuum emission in protoplanetary disks located within massive star-forming regions. We also characte…
▽ More
The dust in planet-forming disks evolve rapidly through growth and radial drift, and external photoevaporation also contributes to this evolution in massive star-forming regions. We test whether the presence of substructures can explain the survival of the dust component and observed millimeter continuum emission in protoplanetary disks located within massive star-forming regions. We also characterize the dust content removed by the photoevaporative winds. For this, we performed hydrodynamical simulations of protoplanetary disks subject to irradiation fields of $F_{UV} = 10^2$, $10^3$, and $10^4\, G_0$, with different dust trap locations. We used the FRIED grid to derive the mass loss rate for each irradiation field and disk properties, and then measure the evolution of the dust mass over time. For each simulation we estimate continuum emission at $λ= 1.3\, \textrm{mm}$ along with the radii encompassing $90\%$ of the continuum flux, and characterize the dust size distribution entrained in the photoevaporative winds, along with the resulting far-ultraviolet (FUV) cross section. Our simulations show that the presence of dust traps can extend the lifetime of the dust component of the disk to a few millionyears if the FUV irradiation is $F_{UV} \lesssim 10^3 G_0$, but only if the dust traps are located inside the photoevaporative truncation radius. The dust component of a disk quickly disperse if the FUV irradiation is strong ($10^4\, G_0$) or if the substructures are located outside the photoevaporation radius. We do find however, that the dust grains entrained with the photoevaporative winds may result in an absorption FUV cross section of $σ\approx 10^{-22}\, \textrm{cm}^2$ at early times of evolution ($<$0.1 Myr), which is enough to trigger a self-shielding effect that reduces the total mass loss rate, and slow down the disk dispersal in a negative feedback loop process.
△ Less
Submitted 31 October, 2023;
originally announced October 2023.
-
Millimeter emission in photoevaporating disks is determined by early substructures
Authors:
Matías Gárate,
Til Birnstiel,
Paola Pinilla,
Sean M. Andrews,
Raphael Franz,
Sebastian Markus Stammler,
Giovanni Picogna,
Barbara Ercolano,
Anna Miotello,
Nicolás T. Kurtovic
Abstract:
[abridged]Photoevaporation and dust-trapping are individually considered to be important mechanisms in the evolution and morphology of protoplanetary disks. We studied how the presence of early substructures affects the evolution of the dust distribution and flux in the millimeter continuum of disks that are undergoing photoevaporative dispersal. We also tested if the predicted properties resemble…
▽ More
[abridged]Photoevaporation and dust-trapping are individually considered to be important mechanisms in the evolution and morphology of protoplanetary disks. We studied how the presence of early substructures affects the evolution of the dust distribution and flux in the millimeter continuum of disks that are undergoing photoevaporative dispersal. We also tested if the predicted properties resemble those observed in the population of transition disks. We used the numerical code Dustpy to simulate disk evolution considering gas accretion, dust growth, dust-trapping at substructures, and mass loss due to X-ray and EUV (XEUV) photoevaporation and dust entrainment. Then, we compared how the dust mass and millimeter flux evolve for different disk models. We find that, during photoevaporative dispersal, disks with primordial substructures retain more dust and are brighter in the millimeter continuum than disks without early substructures, regardless of the photoevaporative cavity size. Once the photoevaporative cavity opens, the estimated fluxes for the disk models that are initially structured are comparable to those found in the bright transition disk population ($F_\textrm{mm} > 30\, \textrm{mJy}$), while the disk models that are initially smooth have fluxes comparable to the transition disks from the faint population ($F_\textrm{mm} < 30\, \textrm{mJy}$), suggesting a link between each model and population. Our models indicate that the efficiency of the dust trapping determines the millimeter flux of the disk, while the gas loss due to photoevaporation controls the formation and expansion of a cavity, decoupling the mechanisms responsible for each feature. In consequence, even a planet with a mass comparable to Saturn could trap enough dust to reproduce the millimeter emission of a bright transition disk, while its cavity size is independently driven by photoevaporative dispersal.
△ Less
Submitted 15 September, 2023;
originally announced September 2023.
-
Observability of Photoevaporation Signatures in the Dust Continuum Emission of Transition Discs
Authors:
Giovanni Picogna,
Carolina Schäfer,
Barbara Ercolano,
Christian Rab,
Rafael Franz,
Matías Gárate
Abstract:
Photoevaporative disc winds play a key role in our understanding of circumstellar disc evolution, especially in the final stages, and they might affect the planet formation process and the final location of planets. The study of transition discs (i.e. discs with a central dust cavity) is central for our understanding of the photoevaporation process and disc dispersal. However, we need to distingui…
▽ More
Photoevaporative disc winds play a key role in our understanding of circumstellar disc evolution, especially in the final stages, and they might affect the planet formation process and the final location of planets. The study of transition discs (i.e. discs with a central dust cavity) is central for our understanding of the photoevaporation process and disc dispersal. However, we need to distinguish cavities created by photoevaporation from those created by giant planets. Theoretical models are necessary to identify possible observational signatures of the two different processes, and models to find the differences between the two processes are still lacking. In this paper we study a sample of transition discs obtained from radiation-hydrodynamic simulations of internally photoevaporated discs, and focus on the dust dynamics relevant for current ALMA observations. We then compared our results with gaps opened by super Earths/giant planets, finding that the photoevaporated cavity steepness depends mildly on gap size, and it is similar to that of a 1 Jupiter mass planet. However, the dust density drops less rapidly inside the photoevaporated cavity compared to the planetary case due to the less efficient dust filtering. This effect is visible in the resulting spectral index, which shows a larger spectral index at the cavity edge and a shallower increase inside it with respect to the planetary case. The combination of cavity steepness and spectral index might reveal the true nature of transition discs.
△ Less
Submitted 10 May, 2023;
originally announced May 2023.
-
The impact of dust evolution on the dead zone outer edge in magnetized protoplanetary disks
Authors:
Timmy N. Delage,
Matías Gárate,
Satoshi Okuzumi,
Chao-Chin Yang,
Paola Pinilla,
Mario Flock,
Sebastian Markus Stammler,
Tilman Birnstiel
Abstract:
[Abridged] Aims. We provide an important step toward a better understanding of the magnetorotational instability (MRI)-dust coevolution in protoplanetary disks by presenting a proof of concept that dust evolution ultimately plays a crucial role in the MRI activity. Methods. First, we study how a fixed power-law dust size distribution with varying parameters impacts the MRI activity, especially the…
▽ More
[Abridged] Aims. We provide an important step toward a better understanding of the magnetorotational instability (MRI)-dust coevolution in protoplanetary disks by presenting a proof of concept that dust evolution ultimately plays a crucial role in the MRI activity. Methods. First, we study how a fixed power-law dust size distribution with varying parameters impacts the MRI activity, especially the steady-state MRI-driven accretion, by employing and improving our previous 1+1D MRI-driven turbulence model. Second, we relax the steady-state accretion assumption in this disk accretion model, and partially couple it to a dust evolution model in order to investigate how the evolution of dust (dynamics and grain growth processes combined) and MRI-driven accretion are intertwined on million-year timescales. Results. Dust coagulation and settling lead to a higher gas ionization degree in the protoplanetary disk, resulting in stronger MRI-driven turbulence as well as a more compact dead zone. On the other hand, fragmentation has an opposite effect because it replenishes the disk in small dust particles. Since the dust content of the disk decreases over million years of evolution due to radial drift, the MRI-driven turbulence overall becomes stronger and the dead zone more compact until the disk dust-gas mixture eventually behaves as a grain-free plasma. Furthermore, our results show that dust evolution alone does not lead to a complete reactivation of the dead zone. Conclusions. The MRI activity evolution (hence the temporal evolution of the MRI-induced $α$-parameter) is controlled by dust evolution and occurs on a timescale of local dust growth, as long as there is enough dust particles in the disk to dominate the recombination process for the ionization chemistry. Once it is no longer the case, it is expected to be controlled by gas evolution and occurs on a viscous evolution timescale.
△ Less
Submitted 27 March, 2023;
originally announced March 2023.
-
The impact of dynamic pressure bumps on the observational properties of protoplanetary disks
Authors:
Jochen Stadler,
Matías Gárate,
Paola Pinilla,
Christian Lenz,
Cornelis P. Dullemond,
Til Birnstiel,
Sebastian M. Stammler
Abstract:
Over the last years, large (sub-)millimetre surveys of protoplanetary disks have well constrained the demographics of disks, such as their millimetre luminosities, spectral indices, and disk radii. Additionally, several high-resolution observations have revealed an abundance of substructures in the disks dust continuum. The most prominent are ring like structures, likely due to pressure bumps trap…
▽ More
Over the last years, large (sub-)millimetre surveys of protoplanetary disks have well constrained the demographics of disks, such as their millimetre luminosities, spectral indices, and disk radii. Additionally, several high-resolution observations have revealed an abundance of substructures in the disks dust continuum. The most prominent are ring like structures, likely due to pressure bumps trapping dust particles. The origins and characteristics of these bumps, nevertheless, need to be further investigated. The purpose of this work is to study how dynamic pressure bumps affect observational properties of protoplanetary disks. We further aim to differentiate between the planetary- versus zonal flow-origin of pressure bumps. We perform one-dimensional gas and dust evolution simulations, setting up models with varying pressure bump features. We subsequently run radiative transfer calculations to obtain synthetic images and the different quantities of observations. We find that the outermost pressure bump determines the disks dust size across different millimetre wavelengths. Our modelled dust traps need to form early (< 0.1 Myr), fast (on viscous timescales), and must be long lived (> Myr) to obtain the observed high millimetre luminosities and low spectral indices of disks. While the planetary bump models can reproduce these observables irrespectively of the opacity prescription, the highest opacities are needed for the zonal flow bump model to be in line with observations. Our findings favour the planetary- over the zonal flow-origin of pressure bumps and support the idea that planet formation already occurs in early class 0-1 stages of circumstellar disks. The determination of the disks effective size through its outermost pressure bump also delivers a possible answer to why disks in recent low-resolution surveys appear to have the same sizes across different millimetre wavelengths.
△ Less
Submitted 16 September, 2022;
originally announced September 2022.
-
Efficient Dust Radial Drift Around Young Intermediate-mass Stars
Authors:
Paola Pinilla,
Antonio Garufi,
Matías Gárate
Abstract:
The radial velocities and direct imaging observations of exoplanets have suggested that the frequency of giant planets may decrease for intermediate-mass stars ($2.5-8\,M_\odot$). The key mechanism that could hinder their formation remains unclear. From a theoretical point of view, planet formation around intermediate-mass stars may take place on longer timescales, which -- coupled with fast migra…
▽ More
The radial velocities and direct imaging observations of exoplanets have suggested that the frequency of giant planets may decrease for intermediate-mass stars ($2.5-8\,M_\odot$). The key mechanism that could hinder their formation remains unclear. From a theoretical point of view, planet formation around intermediate-mass stars may take place on longer timescales, which -- coupled with fast migration and efficient photoevaporation -- may prevent planetary formation in these environments. In this letter, we investigate the temporal evolution of the radial drift for dust particles in disks when stellar evolution is taken into account. We demonstrate that the particle drift velocity around intermediate-mass stars sharply increases after 1$-$2 Myr, potentially forming a difficult barrier to overcome in the first steps of planet formation. This high radial drift could explain the lack of disk detections around intermediate-mass stars older than 3$-$4 Myr, as opposed to low-mass stars ($<2.5\,M_\odot$), where the drift may not be the most impactful factor for the disk evolution. Future high-resolution images of these disks can help us to explain why planets around intermediate-mass stars may be rare. In addition, we can explore whether the role of efficient dust radial drift does in fact hinder planet formation around intermediate-mass stars -- or otherwise.
△ Less
Submitted 14 June, 2022; v1 submitted 7 June, 2022;
originally announced June 2022.
-
Large gaps and high accretion rates in photoevaporative transition disks with a dead zone
Authors:
Matías Gárate,
Timmy N. Delage,
Jochen Stadler,
Paola Pinilla,
Til Birnstiel,
Sebastian M. Stammler,
Giovanni Picogna,
Barbara Ercolano,
Raphael Franz,
Christian Lenz
Abstract:
Observations of young stars hosting transition disks show that several of them have high accretion rates, despite their disks presenting extended cavities in their dust component. This represents a challenge for theoretical models, which struggle to reproduce both features. We explore if a disk evolution model, including a dead zone and disk dispersal by X-ray photoevaporation, can explain the hig…
▽ More
Observations of young stars hosting transition disks show that several of them have high accretion rates, despite their disks presenting extended cavities in their dust component. This represents a challenge for theoretical models, which struggle to reproduce both features. We explore if a disk evolution model, including a dead zone and disk dispersal by X-ray photoevaporation, can explain the high accretion rates and large gaps (or cavities) measured in transition disks. We implement a dead zone turbulence profile and a photoevaporative mass loss profile into numerical simulations of gas and dust. We perform a population synthesis study of the gas component, and obtain synthetic images and SED of the dust component through radiative transfer calculations. This model results in long lived inner disks and fast dispersing outer disks, that can reproduce both the accretion rates and gap sizes observed in transition disks. For a dead zone of turbulence $α_{dz} = 10^{-4}$ and extent $r_{dz}$ = 10 AU, our population synthesis study shows that $63\%$ of our transition disks are accreting with $\dot{M}_g > 10^{-11} M_\odot/yr$ after opening a gap. Among those accreting transition disks, half display accretion rates higher than $5\times10^{-10} M_\odot/yr$ . The dust component in these disks is distributed in two regions: in a compact inner disk inside the dead zone, and in a ring at the outer edge of the photoevaporative gap, which can be located between 20 AU and 100 AU. Our radiative transfer calculations show that the disk displays an inner disk and an outer ring in the millimeter continuum, a feature observed in some transition disks. A disk model considering X-ray photoevaporative dispersal in combination with dead zones can explain several of the observed properties in transition disks including: the high accretion rates, the large gaps, and long-lived inner disks at mm-emission.
△ Less
Submitted 18 October, 2021;
originally announced October 2021.
-
Constraining the properties of the potential embedded planets in the disk around HD 100546
Authors:
Max Ackermann Pyerin,
Timmy N. Delage,
Nicolás T. Kurtovic,
Matías Gárate,
Thomas Henning,
Paola Pinilla
Abstract:
Context. The protoplanetary disk around the star HD 100546 displays prominent substructures in the form of two concentric rings. Recent observations with the Atacama Large Millimeter/sub-millimeter Array (ALMA) have revealed these features with high angular resolution and have resolved the faint outer ring well. This allows us to study the nature of the system further.
Aims. Our aim is to constr…
▽ More
Context. The protoplanetary disk around the star HD 100546 displays prominent substructures in the form of two concentric rings. Recent observations with the Atacama Large Millimeter/sub-millimeter Array (ALMA) have revealed these features with high angular resolution and have resolved the faint outer ring well. This allows us to study the nature of the system further.
Aims. Our aim is to constrain some of the properties of potential planets embedded in the disk, assuming that they induce the observed rings and gaps.
Methods. We present the self-calibrated $0.9\,$mm ALMA observations of the dust continuum emission from the circumstellar disk around HD 100546. These observations reveal substructures in the disk that are consistent with two rings, the outer ring being much fainter than the inner one. We reproduced this appearance closely with a numerical model that assumes two embedded planets. We varied planet and disk parameters in the framework of the planet-disk interaction code FARGO3D and used the outputs for the gas and dust distribution to generate synthetic observations with the code RADMC-3D.
Results. From this comparison, we find that an inner planet located at $r_1 = 13\,$au with a mass $M_1 = 8 M_{\rm{Jup}}$ and an outer planet located at $r_2 = 143\,$au with a mass $M_2 = 3 M_{\rm{Jup}}$ leads to the best agreement between synthetic and ALMA observations (deviation less than $3σ$ for the normalized radial profiles). To match the very low brightness of the outer structure relative to the inner ring, the initial disk gas surface density profile needs to follow an exponentially tapered power law (self-similar solution), rather than a simple power-law profile.
△ Less
Submitted 11 October, 2021; v1 submitted 7 October, 2021;
originally announced October 2021.
-
Gas accretion damped by dust back-reaction at the snow line
Authors:
Matías Gárate,
Til Birnstiel,
Joanna Drazkowska,
Sebastian Markus Stammler
Abstract:
Context. The water snowline divides dry and icy solid material in protoplanetary disks, and has been thought to significantly affect planet formation at all stages. If dry particles break up more easily than icy ones, then the snowline causes a traffic jam, because small grains drift inward at lower speeds than larger pebbles. Aims. We aim to evaluate the effect of high dust concentrations around…
▽ More
Context. The water snowline divides dry and icy solid material in protoplanetary disks, and has been thought to significantly affect planet formation at all stages. If dry particles break up more easily than icy ones, then the snowline causes a traffic jam, because small grains drift inward at lower speeds than larger pebbles. Aims. We aim to evaluate the effect of high dust concentrations around the snowline onto the gas dynamics. Methods. Using numerical simulations, we model the global radial evolution of an axisymmetric protoplanetary disk. Our model includes particle growth, evaporation and recondensation of water, and the back-reaction of dust onto the gas, taking into account the vertical distribution of dust particles. Results. We find that the dust back-reaction can stop and even reverse the net flux of gas outside the snowline, decreasing the gas accretion rate onto the star to under $50\%$ of its initial value. At the same time the dust accumulates at the snowline, reaching dust-to-gas ratios of $ε\gtrsim 0.8$, and delivers large amounts of water vapor towards the inner disk, as the icy particles cross the snowline. However, the accumulation of dust at the snowline and the decrease in the gas accretion rate only take place if the global dust-to-gas ratio is high ($\varepsilon_0 \gtrsim 0.03$), if the viscous turbulence is low ($α_ν\lesssim 10^{-3} $), if the disk is large enough ($r_c \gtrsim 100\, \textrm{au}$), and only during the early phases of the disk evolution ($t \lesssim 1\, \textrm{Myr}$). Otherwise the dust back-reaction fails to perturb the gas motion.
△ Less
Submitted 27 February, 2020; v1 submitted 18 June, 2019;
originally announced June 2019.
-
The dimming of RW Auriga. Is dust accretion preceding an outburst?
Authors:
Matías Gárate,
Til Birnstiel,
Sebastian Markus Stammler,
Hans Moritz Günther
Abstract:
RW Aur A has experienced various dimming events in the last years, decreasing its brightness by $\sim 2\ \textrm{mag}$ for periods of months to years. Multiple observations indicate that a high concentration of dust grains, from the protoplanetary disk's inner regions, is blocking the starlight during these events. We propose a new mechanism that can send large amounts of dust close to the star on…
▽ More
RW Aur A has experienced various dimming events in the last years, decreasing its brightness by $\sim 2\ \textrm{mag}$ for periods of months to years. Multiple observations indicate that a high concentration of dust grains, from the protoplanetary disk's inner regions, is blocking the starlight during these events. We propose a new mechanism that can send large amounts of dust close to the star on short timescales, through the reactivation of a dead zone in the protoplanetary disk. Using numerical simulations we model the accretion of gas and dust, along with the growth and fragmentation of particles in this scenario. We find that after the reactivation of the dead zone, the accumulated dust is rapidly accreted towards the star in around 15 years, at rates of $\dot{M}_\textrm{d} = 6 \times 10^{-6}\, \textrm{M}_\odot/\textrm{yr}$ and reaching dust-to-gas ratios of $ε\approx 5$, preceding an increase in the gas accretion by a few years. This sudden rise of dust accretion can provide the material required for the dimmings, although the question of how to put the dust into the line of sight remains open to speculation.
△ Less
Submitted 8 January, 2019; v1 submitted 15 October, 2018;
originally announced October 2018.
-
Feedback-limited Accretion: Variable Luminosity from Growing Planets
Authors:
Matías Gárate,
Jorge Cuadra,
Matias Montesinos,
Patricia Arévalo
Abstract:
Planets form in discs of gas and dust around stars, and continue to grow by accretion of disc material while available. Massive planets clear a gap in their protoplanetary disc, but can still accrete gas through a circumplanetary disk. For high enough accretion rates the planet should be detectable at infrared wavelengths. As the energy of the gas accreted on to the planet is released, the planet…
▽ More
Planets form in discs of gas and dust around stars, and continue to grow by accretion of disc material while available. Massive planets clear a gap in their protoplanetary disc, but can still accrete gas through a circumplanetary disk. For high enough accretion rates the planet should be detectable at infrared wavelengths. As the energy of the gas accreted on to the planet is released, the planet surroundings heat up in a feedback process. We aim to test how this planet feedback affects the gas in the coorbital region and the accretion rate itself. We modified the 2D code FARGO-AD to include a prescription for the accretion and feedback luminosity of the planet and use it to model giant planets on 10 au circular and eccentric orbits around a solar mass star. We find that this feedback reduces but does not halt the accretion on to the planet, although this result might depend on the near-coincident radial ranges where both recipes are implemented. Our simulations also show that the planet heating gives the accretion rate a stochastic variability with an amplitude $Δ\dot{M}_p \sim 0.1 \dot{M}_p$. A planet on an eccentric orbit ($e=0.1)$ presents a similar variability amplitude, but concentrated on a well-defined periodicity of half the orbital period and weaker broadband noise, potentially allowing observations to discriminate between both cases. Finally, we find that the heating of the coorbital region by the planet feedback alters the gas dynamics, reducing the difference between its orbital velocity and the Keplerian motion at the edge of the gap, which can have important consequences for the formation of dust rings.
△ Less
Submitted 14 December, 2020; v1 submitted 3 November, 2017;
originally announced November 2017.
-
Proper motions in the VVV Survey: Results for more than 15 million stars across NGC 6544
Authors:
R. Contreras Ramos,
M. Zoccali,
F. Rojas,
A. Rojas-Arriagada,
M. Gárate,
P. Huijse,
F. Gran,
M. Soto,
A. A. R. Valcarce,
P. A. Estévez,
D. Minniti
Abstract:
Context: In the last six years, the VVV survey mapped 562 sq. deg. across the bulge and southern disk of the Galaxy. However, a detailed study of these regions, which includes $\sim 36$ globular clusters (GCs) and thousands of open clusters is by no means an easy challenge. High differential reddening and severe crowding along the line of sight makes highly hamper to reliably distinguish stars bel…
▽ More
Context: In the last six years, the VVV survey mapped 562 sq. deg. across the bulge and southern disk of the Galaxy. However, a detailed study of these regions, which includes $\sim 36$ globular clusters (GCs) and thousands of open clusters is by no means an easy challenge. High differential reddening and severe crowding along the line of sight makes highly hamper to reliably distinguish stars belonging to different populations and/or systems. Aims: The aim of this study is to separate stars that likely belong to the Galactic GC NGC 6544 from its surrounding field by means of proper motion (PM) techniques. Methods: This work was based upon a new astrometric reduction method optimized for images of the VVV survey. Results: Photometry over the six years baseline of the survey allowed us to obtain a mean precision of $\sim0.51$ mas/yr, in each PM coordinate, for stars with Ks < 15 mag. In the area studied here, cluster stars separate very well from field stars, down to the main sequence turnoff and below, allowing us to derive for the first time the absolute PM of NGC 6544. Isochrone fitting on the clean and differential reddening corrected cluster color magnitude diagram yields an age of $\sim$ 11-13 Gyr, and metallicity [Fe/H] = -1.5 dex, in agreement with previous studies restricted to the cluster core. We were able to derive the cluster orbit assuming an axisymmetric model of the Galaxy and conclude that NGC 6544 is likely a halo GC. We have not detected tidal tail signatures associated to the cluster, but a remarkable elongation in the galactic center direction has been found. The precision achieved in the PM determination also allows us to separate bulge stars from foreground disk stars, enabling the kinematical selection of bona fide bulge stars across the whole survey area. Our results show that VVV data is perfectly suitable for this kind of analysis.
△ Less
Submitted 22 September, 2017;
originally announced September 2017.
-
Voxel datacubes for 3D visualization in Blender
Authors:
Matías Gárate
Abstract:
The growth of computational astrophysics and complexity of multidimensional datasets evidences the need for new versatile visualization tools for both analysis and presentation of the data. In this work we show how to use the open source software Blender as a 3D visualization tool to study and visualize numerical simulation results, focusing on astrophysical hydrodynamic experiments. With a datacu…
▽ More
The growth of computational astrophysics and complexity of multidimensional datasets evidences the need for new versatile visualization tools for both analysis and presentation of the data. In this work we show how to use the open source software Blender as a 3D visualization tool to study and visualize numerical simulation results, focusing on astrophysical hydrodynamic experiments. With a datacube as input, the software can generate a volume rendering of the 3D data, show the evolution of a simulation in time, and do a fly-around camera animation to highlight the points of interest. We explain the process to import simulation outputs into Blender using the Voxel Data format, and how to set up a visualization scene in the software interface. This method allows scientists to perform a complementary visual analysis of their data, and display their results in an appealing way, both for outreach and science presentations.
△ Less
Submitted 21 November, 2016;
originally announced November 2016.
